Makefile.in revision fc544a13 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17
18
19VPATH = @srcdir@
20am__is_gnu_make = { \
21  if test -z '$(MAKELEVEL)'; then \
22    false; \
23  elif test -n '$(MAKE_HOST)'; then \
24    true; \
25  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
26    true; \
27  else \
28    false; \
29  fi; \
30}
31am__make_running_with_option = \
32  case $${target_option-} in \
33      ?) ;; \
34      *) echo "am__make_running_with_option: internal error: invalid" \
35              "target option '$${target_option-}' specified" >&2; \
36         exit 1;; \
37  esac; \
38  has_opt=no; \
39  sane_makeflags=$$MAKEFLAGS; \
40  if $(am__is_gnu_make); then \
41    sane_makeflags=$$MFLAGS; \
42  else \
43    case $$MAKEFLAGS in \
44      *\\[\ \	]*) \
45        bs=\\; \
46        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
47          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
48    esac; \
49  fi; \
50  skip_next=no; \
51  strip_trailopt () \
52  { \
53    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
54  }; \
55  for flg in $$sane_makeflags; do \
56    test $$skip_next = yes && { skip_next=no; continue; }; \
57    case $$flg in \
58      *=*|--*) continue;; \
59        -*I) strip_trailopt 'I'; skip_next=yes;; \
60      -*I?*) strip_trailopt 'I';; \
61        -*O) strip_trailopt 'O'; skip_next=yes;; \
62      -*O?*) strip_trailopt 'O';; \
63        -*l) strip_trailopt 'l'; skip_next=yes;; \
64      -*l?*) strip_trailopt 'l';; \
65      -[dEDm]) skip_next=yes;; \
66      -[JT]) skip_next=yes;; \
67    esac; \
68    case $$flg in \
69      *$$target_option*) has_opt=yes; break;; \
70    esac; \
71  done; \
72  test $$has_opt = yes
73am__make_dryrun = (target_option=n; $(am__make_running_with_option))
74am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
75pkgdatadir = $(datadir)/@PACKAGE@
76pkgincludedir = $(includedir)/@PACKAGE@
77pkglibdir = $(libdir)/@PACKAGE@
78pkglibexecdir = $(libexecdir)/@PACKAGE@
79am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
80install_sh_DATA = $(install_sh) -c -m 644
81install_sh_PROGRAM = $(install_sh) -c
82install_sh_SCRIPT = $(install_sh) -c
83INSTALL_HEADER = $(INSTALL_DATA)
84transform = $(program_transform_name)
85NORMAL_INSTALL = :
86PRE_INSTALL = :
87POST_INSTALL = :
88NORMAL_UNINSTALL = :
89PRE_UNINSTALL = :
90POST_UNINSTALL = :
91build_triplet = @build@
92host_triplet = @host@
93subdir = .
94ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
95am__aclocal_m4_deps = $(top_srcdir)/configure.ac
96am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
97	$(ACLOCAL_M4)
98DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
99	$(am__configure_deps) $(xdmcpinclude_HEADERS) \
100	$(am__DIST_COMMON)
101am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
102 configure.lineno config.status.lineno
103mkinstalldirs = $(install_sh) -d
104CONFIG_HEADER = config.h
105CONFIG_CLEAN_FILES = xdmcp.pc
106CONFIG_CLEAN_VPATH_FILES =
107am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
108am__vpath_adj = case $$p in \
109    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
110    *) f=$$p;; \
111  esac;
112am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
113am__install_max = 40
114am__nobase_strip_setup = \
115  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
116am__nobase_strip = \
117  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
118am__nobase_list = $(am__nobase_strip_setup); \
119  for p in $$list; do echo "$$p $$p"; done | \
120  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
121  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
122    if (++n[$$2] == $(am__install_max)) \
123      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
124    END { for (dir in files) print dir, files[dir] }'
125am__base_list = \
126  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
127  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
128am__uninstall_files_from_dir = { \
129  test -z "$$files" \
130    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
131    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
132         $(am__cd) "$$dir" && rm -f $$files; }; \
133  }
134am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(lintlibdir)" \
135	"$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(xdmcpincludedir)"
136LTLIBRARIES = $(lib_LTLIBRARIES)
137am__DEPENDENCIES_1 =
138libXdmcp_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
139am_libXdmcp_la_OBJECTS = Array.lo Fill.lo Flush.lo Key.lo Read.lo \
140	Unwrap.lo Wrap.lo Write.lo
141@HASXDMAUTH_TRUE@nodist_libXdmcp_la_OBJECTS = Wraphelp.lo
142libXdmcp_la_OBJECTS = $(am_libXdmcp_la_OBJECTS) \
143	$(nodist_libXdmcp_la_OBJECTS)
144AM_V_lt = $(am__v_lt_@AM_V@)
145am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
146am__v_lt_0 = --silent
147am__v_lt_1 = 
148libXdmcp_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
149	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
150	$(libXdmcp_la_LDFLAGS) $(LDFLAGS) -o $@
151AM_V_P = $(am__v_P_@AM_V@)
152am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
153am__v_P_0 = false
154am__v_P_1 = :
155AM_V_GEN = $(am__v_GEN_@AM_V@)
156am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
157am__v_GEN_0 = @echo "  GEN     " $@;
158am__v_GEN_1 = 
159AM_V_at = $(am__v_at_@AM_V@)
160am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
161am__v_at_0 = @
162am__v_at_1 = 
163DEFAULT_INCLUDES = -I.@am__isrc@
164depcomp = $(SHELL) $(top_srcdir)/depcomp
165am__depfiles_maybe = depfiles
166am__mv = mv -f
167COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
168	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
169LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
170	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
171	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
172	$(AM_CFLAGS) $(CFLAGS)
173AM_V_CC = $(am__v_CC_@AM_V@)
174am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
175am__v_CC_0 = @echo "  CC      " $@;
176am__v_CC_1 = 
177CCLD = $(CC)
178LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
179	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
180	$(AM_LDFLAGS) $(LDFLAGS) -o $@
181AM_V_CCLD = $(am__v_CCLD_@AM_V@)
182am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
183am__v_CCLD_0 = @echo "  CCLD    " $@;
184am__v_CCLD_1 = 
185SOURCES = $(libXdmcp_la_SOURCES) $(nodist_libXdmcp_la_SOURCES)
186DIST_SOURCES = $(libXdmcp_la_SOURCES)
187RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
188	ctags-recursive dvi-recursive html-recursive info-recursive \
189	install-data-recursive install-dvi-recursive \
190	install-exec-recursive install-html-recursive \
191	install-info-recursive install-pdf-recursive \
192	install-ps-recursive install-recursive installcheck-recursive \
193	installdirs-recursive pdf-recursive ps-recursive \
194	tags-recursive uninstall-recursive
195am__can_run_installinfo = \
196  case $$AM_UPDATE_INFO_DIR in \
197    n|no|NO) false;; \
198    *) (install-info --version) >/dev/null 2>&1;; \
199  esac
200DATA = $(lintlib_DATA) $(pkgconfig_DATA)
201HEADERS = $(xdmcpinclude_HEADERS)
202RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
203  distclean-recursive maintainer-clean-recursive
204am__recursive_targets = \
205  $(RECURSIVE_TARGETS) \
206  $(RECURSIVE_CLEAN_TARGETS) \
207  $(am__extra_recursive_targets)
208AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
209	cscope distdir dist dist-all distcheck
210am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
211	$(LISP)config.h.in
212# Read a list of newline-separated strings from the standard input,
213# and print each of them once, without duplicates.  Input order is
214# *not* preserved.
215am__uniquify_input = $(AWK) '\
216  BEGIN { nonempty = 0; } \
217  { items[$$0] = 1; nonempty = 1; } \
218  END { if (nonempty) { for (i in items) print i; }; } \
219'
220# Make sure the list of sources is unique.  This is necessary because,
221# e.g., the same source file might be shared among _SOURCES variables
222# for different programs/libraries.
223am__define_uniq_tagged_files = \
224  list='$(am__tagged_files)'; \
225  unique=`for i in $$list; do \
226    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
227  done | $(am__uniquify_input)`
228ETAGS = etags
229CTAGS = ctags
230CSCOPE = cscope
231DIST_SUBDIRS = $(SUBDIRS)
232am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
233	$(srcdir)/xdmcp.pc.in AUTHORS COPYING ChangeLog INSTALL README \
234	compile config.guess config.sub depcomp install-sh ltmain.sh \
235	missing
236DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
237distdir = $(PACKAGE)-$(VERSION)
238top_distdir = $(distdir)
239am__remove_distdir = \
240  if test -d "$(distdir)"; then \
241    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
242      && rm -rf "$(distdir)" \
243      || { sleep 5 && rm -rf "$(distdir)"; }; \
244  else :; fi
245am__post_remove_distdir = $(am__remove_distdir)
246am__relativize = \
247  dir0=`pwd`; \
248  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
249  sed_rest='s,^[^/]*/*,,'; \
250  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
251  sed_butlast='s,/*[^/]*$$,,'; \
252  while test -n "$$dir1"; do \
253    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
254    if test "$$first" != "."; then \
255      if test "$$first" = ".."; then \
256        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
257        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
258      else \
259        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
260        if test "$$first2" = "$$first"; then \
261          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
262        else \
263          dir2="../$$dir2"; \
264        fi; \
265        dir0="$$dir0"/"$$first"; \
266      fi; \
267    fi; \
268    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
269  done; \
270  reldir="$$dir2"
271DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
272GZIP_ENV = --best
273DIST_TARGETS = dist-bzip2 dist-gzip
274distuninstallcheck_listfiles = find . -type f -print
275am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
276  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
277distcleancheck_listfiles = find . -type f -print
278ACLOCAL = @ACLOCAL@
279ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
280ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
281AMTAR = @AMTAR@
282AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
283APP_MAN_DIR = @APP_MAN_DIR@
284APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
285AR = @AR@
286AS = @AS@
287AUTOCONF = @AUTOCONF@
288AUTOHEADER = @AUTOHEADER@
289AUTOMAKE = @AUTOMAKE@
290AWK = @AWK@
291BASE_CFLAGS = @BASE_CFLAGS@
292CC = @CC@
293CCDEPMODE = @CCDEPMODE@
294CFLAGS = @CFLAGS@
295CHANGELOG_CMD = @CHANGELOG_CMD@
296CPP = @CPP@
297CPPFLAGS = @CPPFLAGS@
298CWARNFLAGS = @CWARNFLAGS@
299CYGPATH_W = @CYGPATH_W@
300DEFS = @DEFS@
301DEPDIR = @DEPDIR@
302DLLTOOL = @DLLTOOL@
303DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
304DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
305DSYMUTIL = @DSYMUTIL@
306DUMPBIN = @DUMPBIN@
307ECHO_C = @ECHO_C@
308ECHO_N = @ECHO_N@
309ECHO_T = @ECHO_T@
310EGREP = @EGREP@
311EXEEXT = @EXEEXT@
312FGREP = @FGREP@
313FILE_MAN_DIR = @FILE_MAN_DIR@
314FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
315FOP = @FOP@
316GREP = @GREP@
317INSTALL = @INSTALL@
318INSTALL_CMD = @INSTALL_CMD@
319INSTALL_DATA = @INSTALL_DATA@
320INSTALL_PROGRAM = @INSTALL_PROGRAM@
321INSTALL_SCRIPT = @INSTALL_SCRIPT@
322INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
323LD = @LD@
324LDFLAGS = @LDFLAGS@
325LIBOBJS = @LIBOBJS@
326LIBS = @LIBS@
327LIBTOOL = @LIBTOOL@
328LIB_MAN_DIR = @LIB_MAN_DIR@
329LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
330LINT = @LINT@
331LINTLIB = @LINTLIB@
332LINT_FLAGS = @LINT_FLAGS@
333LIPO = @LIPO@
334LN_S = @LN_S@
335LTLIBOBJS = @LTLIBOBJS@
336MAKEINFO = @MAKEINFO@
337MANIFEST_TOOL = @MANIFEST_TOOL@
338MAN_SUBSTS = @MAN_SUBSTS@
339MISC_MAN_DIR = @MISC_MAN_DIR@
340MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
341MKDIR_P = @MKDIR_P@
342NM = @NM@
343NMEDIT = @NMEDIT@
344OBJDUMP = @OBJDUMP@
345OBJEXT = @OBJEXT@
346OTOOL = @OTOOL@
347OTOOL64 = @OTOOL64@
348PACKAGE = @PACKAGE@
349PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
350PACKAGE_NAME = @PACKAGE_NAME@
351PACKAGE_STRING = @PACKAGE_STRING@
352PACKAGE_TARNAME = @PACKAGE_TARNAME@
353PACKAGE_URL = @PACKAGE_URL@
354PACKAGE_VERSION = @PACKAGE_VERSION@
355PATH_SEPARATOR = @PATH_SEPARATOR@
356PKG_CONFIG = @PKG_CONFIG@
357RANLIB = @RANLIB@
358SED = @SED@
359SET_MAKE = @SET_MAKE@
360SHELL = @SHELL@
361STRICT_CFLAGS = @STRICT_CFLAGS@
362STRIP = @STRIP@
363STYLESHEET_SRCDIR = @STYLESHEET_SRCDIR@
364VERSION = @VERSION@
365XDMCP_CFLAGS = @XDMCP_CFLAGS@
366XDMCP_LIBS = @XDMCP_LIBS@
367XMLTO = @XMLTO@
368XORG_MALLOC_DEBUG_ENV = @XORG_MALLOC_DEBUG_ENV@
369XORG_MAN_PAGE = @XORG_MAN_PAGE@
370XORG_SGML_PATH = @XORG_SGML_PATH@
371XSLTPROC = @XSLTPROC@
372XSL_STYLESHEET = @XSL_STYLESHEET@
373abs_builddir = @abs_builddir@
374abs_srcdir = @abs_srcdir@
375abs_top_builddir = @abs_top_builddir@
376abs_top_srcdir = @abs_top_srcdir@
377ac_ct_AR = @ac_ct_AR@
378ac_ct_CC = @ac_ct_CC@
379ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
380am__include = @am__include@
381am__leading_dot = @am__leading_dot@
382am__quote = @am__quote@
383am__tar = @am__tar@
384am__untar = @am__untar@
385bindir = @bindir@
386build = @build@
387build_alias = @build_alias@
388build_cpu = @build_cpu@
389build_os = @build_os@
390build_vendor = @build_vendor@
391builddir = @builddir@
392datadir = @datadir@
393datarootdir = @datarootdir@
394docdir = @docdir@
395dvidir = @dvidir@
396exec_prefix = @exec_prefix@
397host = @host@
398host_alias = @host_alias@
399host_cpu = @host_cpu@
400host_os = @host_os@
401host_vendor = @host_vendor@
402htmldir = @htmldir@
403includedir = @includedir@
404infodir = @infodir@
405install_sh = @install_sh@
406libdir = @libdir@
407libexecdir = @libexecdir@
408localedir = @localedir@
409localstatedir = @localstatedir@
410mandir = @mandir@
411mkdir_p = @mkdir_p@
412oldincludedir = @oldincludedir@
413pdfdir = @pdfdir@
414prefix = @prefix@
415program_transform_name = @program_transform_name@
416psdir = @psdir@
417sbindir = @sbindir@
418sharedstatedir = @sharedstatedir@
419srcdir = @srcdir@
420sysconfdir = @sysconfdir@
421target_alias = @target_alias@
422top_build_prefix = @top_build_prefix@
423top_builddir = @top_builddir@
424top_srcdir = @top_srcdir@
425SUBDIRS = doc . test
426lib_LTLIBRARIES = libXdmcp.la
427AM_CPPFLAGS = -I${top_srcdir}/include
428AM_CFLAGS = \
429	$(XDMCP_CFLAGS) \
430	$(CWARNFLAGS)
431
432libXdmcp_la_LDFLAGS = -version-number 6:0:0 -no-undefined
433libXdmcp_la_LIBADD = $(XDMCP_LIBS)
434libXdmcp_la_SOURCES = \
435	Array.c \
436	Fill.c \
437	Flush.c \
438	Key.c \
439	Read.c \
440	Unwrap.c \
441	Wrap.c \
442	Wrap.h \
443	Write.c
444
445@HASXDMAUTH_TRUE@nodist_libXdmcp_la_SOURCES = Wraphelp.c
446xdmcpincludedir = $(includedir)/X11
447xdmcpinclude_HEADERS = \
448	include/X11/Xdmcp.h
449
450pkgconfigdir = $(libdir)/pkgconfig
451pkgconfig_DATA = xdmcp.pc
452MAINTAINERCLEANFILES = ChangeLog INSTALL
453EXTRA_DIST = autogen.sh Wraphelp.c Wraphelp.README.crypto
454@LINT_TRUE@ALL_LINT_FLAGS = $(LINT_FLAGS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
455@LINT_TRUE@		$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS)
456
457@MAKE_LINT_LIB_TRUE@lintlibdir = $(libdir)
458@MAKE_LINT_LIB_TRUE@lintlib_DATA = $(LINTLIB)
459CLEANFILES = $(lintlib_DATA)
460all: config.h
461	$(MAKE) $(AM_MAKEFLAGS) all-recursive
462
463.SUFFIXES:
464.SUFFIXES: .c .lo .o .obj
465am--refresh: Makefile
466	@:
467$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
468	@for dep in $?; do \
469	  case '$(am__configure_deps)' in \
470	    *$$dep*) \
471	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
472	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
473		&& exit 0; \
474	      exit 1;; \
475	  esac; \
476	done; \
477	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
478	$(am__cd) $(top_srcdir) && \
479	  $(AUTOMAKE) --foreign Makefile
480Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
481	@case '$?' in \
482	  *config.status*) \
483	    echo ' $(SHELL) ./config.status'; \
484	    $(SHELL) ./config.status;; \
485	  *) \
486	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
487	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
488	esac;
489
490$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
491	$(SHELL) ./config.status --recheck
492
493$(top_srcdir)/configure:  $(am__configure_deps)
494	$(am__cd) $(srcdir) && $(AUTOCONF)
495$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
496	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
497$(am__aclocal_m4_deps):
498
499config.h: stamp-h1
500	@test -f $@ || rm -f stamp-h1
501	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
502
503stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
504	@rm -f stamp-h1
505	cd $(top_builddir) && $(SHELL) ./config.status config.h
506$(srcdir)/config.h.in:  $(am__configure_deps) 
507	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
508	rm -f stamp-h1
509	touch $@
510
511distclean-hdr:
512	-rm -f config.h stamp-h1
513xdmcp.pc: $(top_builddir)/config.status $(srcdir)/xdmcp.pc.in
514	cd $(top_builddir) && $(SHELL) ./config.status $@
515
516install-libLTLIBRARIES: $(lib_LTLIBRARIES)
517	@$(NORMAL_INSTALL)
518	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
519	list2=; for p in $$list; do \
520	  if test -f $$p; then \
521	    list2="$$list2 $$p"; \
522	  else :; fi; \
523	done; \
524	test -z "$$list2" || { \
525	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
526	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
527	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
528	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
529	}
530
531uninstall-libLTLIBRARIES:
532	@$(NORMAL_UNINSTALL)
533	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
534	for p in $$list; do \
535	  $(am__strip_dir) \
536	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
537	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
538	done
539
540clean-libLTLIBRARIES:
541	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
542	@list='$(lib_LTLIBRARIES)'; \
543	locs=`for p in $$list; do echo $$p; done | \
544	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
545	      sort -u`; \
546	test -z "$$locs" || { \
547	  echo rm -f $${locs}; \
548	  rm -f $${locs}; \
549	}
550
551libXdmcp.la: $(libXdmcp_la_OBJECTS) $(libXdmcp_la_DEPENDENCIES) $(EXTRA_libXdmcp_la_DEPENDENCIES) 
552	$(AM_V_CCLD)$(libXdmcp_la_LINK) -rpath $(libdir) $(libXdmcp_la_OBJECTS) $(libXdmcp_la_LIBADD) $(LIBS)
553
554mostlyclean-compile:
555	-rm -f *.$(OBJEXT)
556
557distclean-compile:
558	-rm -f *.tab.c
559
560@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Array.Plo@am__quote@
561@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Fill.Plo@am__quote@
562@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Flush.Plo@am__quote@
563@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Key.Plo@am__quote@
564@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Read.Plo@am__quote@
565@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Unwrap.Plo@am__quote@
566@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Wrap.Plo@am__quote@
567@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Wraphelp.Plo@am__quote@
568@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Write.Plo@am__quote@
569
570.c.o:
571@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
572@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
573@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
574@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
575@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
576
577.c.obj:
578@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
579@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
580@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
581@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
582@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
583
584.c.lo:
585@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
586@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
587@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
588@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
589@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
590
591mostlyclean-libtool:
592	-rm -f *.lo
593
594clean-libtool:
595	-rm -rf .libs _libs
596
597distclean-libtool:
598	-rm -f libtool config.lt
599install-lintlibDATA: $(lintlib_DATA)
600	@$(NORMAL_INSTALL)
601	@list='$(lintlib_DATA)'; test -n "$(lintlibdir)" || list=; \
602	if test -n "$$list"; then \
603	  echo " $(MKDIR_P) '$(DESTDIR)$(lintlibdir)'"; \
604	  $(MKDIR_P) "$(DESTDIR)$(lintlibdir)" || exit 1; \
605	fi; \
606	for p in $$list; do \
607	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
608	  echo "$$d$$p"; \
609	done | $(am__base_list) | \
610	while read files; do \
611	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(lintlibdir)'"; \
612	  $(INSTALL_DATA) $$files "$(DESTDIR)$(lintlibdir)" || exit $$?; \
613	done
614
615uninstall-lintlibDATA:
616	@$(NORMAL_UNINSTALL)
617	@list='$(lintlib_DATA)'; test -n "$(lintlibdir)" || list=; \
618	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
619	dir='$(DESTDIR)$(lintlibdir)'; $(am__uninstall_files_from_dir)
620install-pkgconfigDATA: $(pkgconfig_DATA)
621	@$(NORMAL_INSTALL)
622	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
623	if test -n "$$list"; then \
624	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
625	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
626	fi; \
627	for p in $$list; do \
628	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
629	  echo "$$d$$p"; \
630	done | $(am__base_list) | \
631	while read files; do \
632	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
633	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
634	done
635
636uninstall-pkgconfigDATA:
637	@$(NORMAL_UNINSTALL)
638	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
639	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
640	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
641install-xdmcpincludeHEADERS: $(xdmcpinclude_HEADERS)
642	@$(NORMAL_INSTALL)
643	@list='$(xdmcpinclude_HEADERS)'; test -n "$(xdmcpincludedir)" || list=; \
644	if test -n "$$list"; then \
645	  echo " $(MKDIR_P) '$(DESTDIR)$(xdmcpincludedir)'"; \
646	  $(MKDIR_P) "$(DESTDIR)$(xdmcpincludedir)" || exit 1; \
647	fi; \
648	for p in $$list; do \
649	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
650	  echo "$$d$$p"; \
651	done | $(am__base_list) | \
652	while read files; do \
653	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(xdmcpincludedir)'"; \
654	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(xdmcpincludedir)" || exit $$?; \
655	done
656
657uninstall-xdmcpincludeHEADERS:
658	@$(NORMAL_UNINSTALL)
659	@list='$(xdmcpinclude_HEADERS)'; test -n "$(xdmcpincludedir)" || list=; \
660	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
661	dir='$(DESTDIR)$(xdmcpincludedir)'; $(am__uninstall_files_from_dir)
662
663# This directory's subdirectories are mostly independent; you can cd
664# into them and run 'make' without going through this Makefile.
665# To change the values of 'make' variables: instead of editing Makefiles,
666# (1) if the variable is set in 'config.status', edit 'config.status'
667#     (which will cause the Makefiles to be regenerated when you run 'make');
668# (2) otherwise, pass the desired values on the 'make' command line.
669$(am__recursive_targets):
670	@fail=; \
671	if $(am__make_keepgoing); then \
672	  failcom='fail=yes'; \
673	else \
674	  failcom='exit 1'; \
675	fi; \
676	dot_seen=no; \
677	target=`echo $@ | sed s/-recursive//`; \
678	case "$@" in \
679	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
680	  *) list='$(SUBDIRS)' ;; \
681	esac; \
682	for subdir in $$list; do \
683	  echo "Making $$target in $$subdir"; \
684	  if test "$$subdir" = "."; then \
685	    dot_seen=yes; \
686	    local_target="$$target-am"; \
687	  else \
688	    local_target="$$target"; \
689	  fi; \
690	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
691	  || eval $$failcom; \
692	done; \
693	if test "$$dot_seen" = "no"; then \
694	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
695	fi; test -z "$$fail"
696
697ID: $(am__tagged_files)
698	$(am__define_uniq_tagged_files); mkid -fID $$unique
699tags: tags-recursive
700TAGS: tags
701
702tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
703	set x; \
704	here=`pwd`; \
705	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
706	  include_option=--etags-include; \
707	  empty_fix=.; \
708	else \
709	  include_option=--include; \
710	  empty_fix=; \
711	fi; \
712	list='$(SUBDIRS)'; for subdir in $$list; do \
713	  if test "$$subdir" = .; then :; else \
714	    test ! -f $$subdir/TAGS || \
715	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
716	  fi; \
717	done; \
718	$(am__define_uniq_tagged_files); \
719	shift; \
720	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
721	  test -n "$$unique" || unique=$$empty_fix; \
722	  if test $$# -gt 0; then \
723	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
724	      "$$@" $$unique; \
725	  else \
726	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
727	      $$unique; \
728	  fi; \
729	fi
730ctags: ctags-recursive
731
732CTAGS: ctags
733ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
734	$(am__define_uniq_tagged_files); \
735	test -z "$(CTAGS_ARGS)$$unique" \
736	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
737	     $$unique
738
739GTAGS:
740	here=`$(am__cd) $(top_builddir) && pwd` \
741	  && $(am__cd) $(top_srcdir) \
742	  && gtags -i $(GTAGS_ARGS) "$$here"
743cscope: cscope.files
744	test ! -s cscope.files \
745	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
746clean-cscope:
747	-rm -f cscope.files
748cscope.files: clean-cscope cscopelist
749cscopelist: cscopelist-recursive
750
751cscopelist-am: $(am__tagged_files)
752	list='$(am__tagged_files)'; \
753	case "$(srcdir)" in \
754	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
755	  *) sdir=$(subdir)/$(srcdir) ;; \
756	esac; \
757	for i in $$list; do \
758	  if test -f "$$i"; then \
759	    echo "$(subdir)/$$i"; \
760	  else \
761	    echo "$$sdir/$$i"; \
762	  fi; \
763	done >> $(top_builddir)/cscope.files
764
765distclean-tags:
766	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
767	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
768
769distdir: $(DISTFILES)
770	$(am__remove_distdir)
771	test -d "$(distdir)" || mkdir "$(distdir)"
772	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
773	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
774	list='$(DISTFILES)'; \
775	  dist_files=`for file in $$list; do echo $$file; done | \
776	  sed -e "s|^$$srcdirstrip/||;t" \
777	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
778	case $$dist_files in \
779	  */*) $(MKDIR_P) `echo "$$dist_files" | \
780			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
781			   sort -u` ;; \
782	esac; \
783	for file in $$dist_files; do \
784	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
785	  if test -d $$d/$$file; then \
786	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
787	    if test -d "$(distdir)/$$file"; then \
788	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
789	    fi; \
790	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
791	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
792	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
793	    fi; \
794	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
795	  else \
796	    test -f "$(distdir)/$$file" \
797	    || cp -p $$d/$$file "$(distdir)/$$file" \
798	    || exit 1; \
799	  fi; \
800	done
801	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
802	  if test "$$subdir" = .; then :; else \
803	    $(am__make_dryrun) \
804	      || test -d "$(distdir)/$$subdir" \
805	      || $(MKDIR_P) "$(distdir)/$$subdir" \
806	      || exit 1; \
807	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
808	    $(am__relativize); \
809	    new_distdir=$$reldir; \
810	    dir1=$$subdir; dir2="$(top_distdir)"; \
811	    $(am__relativize); \
812	    new_top_distdir=$$reldir; \
813	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
814	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
815	    ($(am__cd) $$subdir && \
816	      $(MAKE) $(AM_MAKEFLAGS) \
817	        top_distdir="$$new_top_distdir" \
818	        distdir="$$new_distdir" \
819		am__remove_distdir=: \
820		am__skip_length_check=: \
821		am__skip_mode_fix=: \
822	        distdir) \
823	      || exit 1; \
824	  fi; \
825	done
826	$(MAKE) $(AM_MAKEFLAGS) \
827	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
828	  dist-hook
829	-test -n "$(am__skip_mode_fix)" \
830	|| find "$(distdir)" -type d ! -perm -755 \
831		-exec chmod u+rwx,go+rx {} \; -o \
832	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
833	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
834	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
835	|| chmod -R a+r "$(distdir)"
836dist-gzip: distdir
837	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
838	$(am__post_remove_distdir)
839dist-bzip2: distdir
840	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
841	$(am__post_remove_distdir)
842
843dist-lzip: distdir
844	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
845	$(am__post_remove_distdir)
846
847dist-xz: distdir
848	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
849	$(am__post_remove_distdir)
850
851dist-tarZ: distdir
852	@echo WARNING: "Support for distribution archives compressed with" \
853		       "legacy program 'compress' is deprecated." >&2
854	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
855	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
856	$(am__post_remove_distdir)
857
858dist-shar: distdir
859	@echo WARNING: "Support for shar distribution archives is" \
860	               "deprecated." >&2
861	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
862	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
863	$(am__post_remove_distdir)
864
865dist-zip: distdir
866	-rm -f $(distdir).zip
867	zip -rq $(distdir).zip $(distdir)
868	$(am__post_remove_distdir)
869
870dist dist-all:
871	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
872	$(am__post_remove_distdir)
873
874# This target untars the dist file and tries a VPATH configuration.  Then
875# it guarantees that the distribution is self-contained by making another
876# tarfile.
877distcheck: dist
878	case '$(DIST_ARCHIVES)' in \
879	*.tar.gz*) \
880	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
881	*.tar.bz2*) \
882	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
883	*.tar.lz*) \
884	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
885	*.tar.xz*) \
886	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
887	*.tar.Z*) \
888	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
889	*.shar.gz*) \
890	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
891	*.zip*) \
892	  unzip $(distdir).zip ;;\
893	esac
894	chmod -R a-w $(distdir)
895	chmod u+w $(distdir)
896	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
897	chmod a-w $(distdir)
898	test -d $(distdir)/_build || exit 0; \
899	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
900	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
901	  && am__cwd=`pwd` \
902	  && $(am__cd) $(distdir)/_build/sub \
903	  && ../../configure \
904	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
905	    $(DISTCHECK_CONFIGURE_FLAGS) \
906	    --srcdir=../.. --prefix="$$dc_install_base" \
907	  && $(MAKE) $(AM_MAKEFLAGS) \
908	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
909	  && $(MAKE) $(AM_MAKEFLAGS) check \
910	  && $(MAKE) $(AM_MAKEFLAGS) install \
911	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
912	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
913	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
914	        distuninstallcheck \
915	  && chmod -R a-w "$$dc_install_base" \
916	  && ({ \
917	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
918	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
919	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
920	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
921	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
922	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
923	  && rm -rf "$$dc_destdir" \
924	  && $(MAKE) $(AM_MAKEFLAGS) dist \
925	  && rm -rf $(DIST_ARCHIVES) \
926	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
927	  && cd "$$am__cwd" \
928	  || exit 1
929	$(am__post_remove_distdir)
930	@(echo "$(distdir) archives ready for distribution: "; \
931	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
932	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
933distuninstallcheck:
934	@test -n '$(distuninstallcheck_dir)' || { \
935	  echo 'ERROR: trying to run $@ with an empty' \
936	       '$$(distuninstallcheck_dir)' >&2; \
937	  exit 1; \
938	}; \
939	$(am__cd) '$(distuninstallcheck_dir)' || { \
940	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
941	  exit 1; \
942	}; \
943	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
944	   || { echo "ERROR: files left after uninstall:" ; \
945	        if test -n "$(DESTDIR)"; then \
946	          echo "  (check DESTDIR support)"; \
947	        fi ; \
948	        $(distuninstallcheck_listfiles) ; \
949	        exit 1; } >&2
950distcleancheck: distclean
951	@if test '$(srcdir)' = . ; then \
952	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
953	  exit 1 ; \
954	fi
955	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
956	  || { echo "ERROR: files left in build directory after distclean:" ; \
957	       $(distcleancheck_listfiles) ; \
958	       exit 1; } >&2
959check-am: all-am
960check: check-recursive
961all-am: Makefile $(LTLIBRARIES) $(DATA) $(HEADERS) config.h
962installdirs: installdirs-recursive
963installdirs-am:
964	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(lintlibdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(xdmcpincludedir)"; do \
965	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
966	done
967install: install-recursive
968install-exec: install-exec-recursive
969install-data: install-data-recursive
970uninstall: uninstall-recursive
971
972install-am: all-am
973	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
974
975installcheck: installcheck-recursive
976install-strip:
977	if test -z '$(STRIP)'; then \
978	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
979	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
980	      install; \
981	else \
982	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
983	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
984	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
985	fi
986mostlyclean-generic:
987
988clean-generic:
989	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
990
991distclean-generic:
992	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
993	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
994
995maintainer-clean-generic:
996	@echo "This command is intended for maintainers to use"
997	@echo "it deletes files that may require special tools to rebuild."
998	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
999clean: clean-recursive
1000
1001clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
1002	mostlyclean-am
1003
1004distclean: distclean-recursive
1005	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
1006	-rm -rf ./$(DEPDIR)
1007	-rm -f Makefile
1008distclean-am: clean-am distclean-compile distclean-generic \
1009	distclean-hdr distclean-libtool distclean-tags
1010
1011dvi: dvi-recursive
1012
1013dvi-am:
1014
1015html: html-recursive
1016
1017html-am:
1018
1019info: info-recursive
1020
1021info-am:
1022
1023install-data-am: install-lintlibDATA install-pkgconfigDATA \
1024	install-xdmcpincludeHEADERS
1025
1026install-dvi: install-dvi-recursive
1027
1028install-dvi-am:
1029
1030install-exec-am: install-libLTLIBRARIES
1031
1032install-html: install-html-recursive
1033
1034install-html-am:
1035
1036install-info: install-info-recursive
1037
1038install-info-am:
1039
1040install-man:
1041
1042install-pdf: install-pdf-recursive
1043
1044install-pdf-am:
1045
1046install-ps: install-ps-recursive
1047
1048install-ps-am:
1049
1050installcheck-am:
1051
1052maintainer-clean: maintainer-clean-recursive
1053	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
1054	-rm -rf $(top_srcdir)/autom4te.cache
1055	-rm -rf ./$(DEPDIR)
1056	-rm -f Makefile
1057maintainer-clean-am: distclean-am maintainer-clean-generic
1058
1059mostlyclean: mostlyclean-recursive
1060
1061mostlyclean-am: mostlyclean-compile mostlyclean-generic \
1062	mostlyclean-libtool
1063
1064pdf: pdf-recursive
1065
1066pdf-am:
1067
1068ps: ps-recursive
1069
1070ps-am:
1071
1072uninstall-am: uninstall-libLTLIBRARIES uninstall-lintlibDATA \
1073	uninstall-pkgconfigDATA uninstall-xdmcpincludeHEADERS
1074
1075.MAKE: $(am__recursive_targets) all install-am install-strip
1076
1077.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1078	am--refresh check check-am clean clean-cscope clean-generic \
1079	clean-libLTLIBRARIES clean-libtool cscope cscopelist-am ctags \
1080	ctags-am dist dist-all dist-bzip2 dist-gzip dist-hook \
1081	dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \
1082	distclean distclean-compile distclean-generic distclean-hdr \
1083	distclean-libtool distclean-tags distcleancheck distdir \
1084	distuninstallcheck dvi dvi-am html html-am info info-am \
1085	install install-am install-data install-data-am install-dvi \
1086	install-dvi-am install-exec install-exec-am install-html \
1087	install-html-am install-info install-info-am \
1088	install-libLTLIBRARIES install-lintlibDATA install-man \
1089	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
1090	install-ps-am install-strip install-xdmcpincludeHEADERS \
1091	installcheck installcheck-am installdirs installdirs-am \
1092	maintainer-clean maintainer-clean-generic mostlyclean \
1093	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
1094	pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \
1095	uninstall-libLTLIBRARIES uninstall-lintlibDATA \
1096	uninstall-pkgconfigDATA uninstall-xdmcpincludeHEADERS
1097
1098.PRECIOUS: Makefile
1099
1100
1101@LINT_TRUE@lint:
1102@LINT_TRUE@	$(LINT) $(ALL_LINT_FLAGS) $(libXdmcp_la_SOURCES) $(nodist_libXdmcp_la_SOURCES) $(LIBS) $(XDMCP_LIBS)
1103
1104@MAKE_LINT_LIB_TRUE@$(LINTLIB): $(libXdmcp_la_SOURCES) $(nodist_libXdmcp_la_SOURCES)
1105@MAKE_LINT_LIB_TRUE@	$(LINT) -y -oXdmcp -x $(ALL_LINT_FLAGS) $(libXdmcp_la_SOURCES) $(nodist_libXdmcp_la_SOURCES)
1106
1107.PHONY: ChangeLog INSTALL
1108
1109INSTALL:
1110	$(INSTALL_CMD)
1111
1112ChangeLog:
1113	$(CHANGELOG_CMD)
1114
1115dist-hook: ChangeLog INSTALL
1116
1117# Tell versions [3.59,3.63) of GNU make to not export all variables.
1118# Otherwise a system limit (for SysV at least) may be exceeded.
1119.NOEXPORT:
1120