Makefile.in revision 41c30155 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18#
19#  Copyright © 2003 Keith Packard, Noah Levitt
20#
21#  Permission to use, copy, modify, distribute, and sell this software and its
22#  documentation for any purpose is hereby granted without fee, provided that
23#  the above copyright notice appear in all copies and that both that
24#  copyright notice and this permission notice appear in supporting
25#  documentation, and that the name of Keith Packard not be used in
26#  advertising or publicity pertaining to distribution of the software without
27#  specific, written prior permission.  Keith Packard makes no
28#  representations about the suitability of this software for any purpose.  It
29#  is provided "as is" without express or implied warranty.
30#
31#  KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
32#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
33#  EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
34#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
35#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
36#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
37#  PERFORMANCE OF THIS SOFTWARE.
38
39
40VPATH = @srcdir@
41pkgdatadir = $(datadir)/@PACKAGE@
42pkgincludedir = $(includedir)/@PACKAGE@
43pkglibdir = $(libdir)/@PACKAGE@
44pkglibexecdir = $(libexecdir)/@PACKAGE@
45am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
46install_sh_DATA = $(install_sh) -c -m 644
47install_sh_PROGRAM = $(install_sh) -c
48install_sh_SCRIPT = $(install_sh) -c
49INSTALL_HEADER = $(INSTALL_DATA)
50transform = $(program_transform_name)
51NORMAL_INSTALL = :
52PRE_INSTALL = :
53POST_INSTALL = :
54NORMAL_UNINSTALL = :
55PRE_UNINSTALL = :
56POST_UNINSTALL = :
57build_triplet = @build@
58host_triplet = @host@
59subdir = .
60DIST_COMMON = README $(am__configure_deps) $(libXfontinclude_HEADERS) \
61	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
62	$(srcdir)/config.h.in $(srcdir)/xfont.pc.in \
63	$(top_srcdir)/configure \
64	$(top_srcdir)/include/X11/fonts/fontconf.h.in AUTHORS COPYING \
65	ChangeLog INSTALL config.guess config.sub depcomp install-sh \
66	ltmain.sh missing
67ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
68am__aclocal_m4_deps = $(top_srcdir)/configure.ac
69am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
70	$(ACLOCAL_M4)
71am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
72 configure.lineno config.status.lineno
73mkinstalldirs = $(install_sh) -d
74CONFIG_HEADER = config.h $(top_builddir)/include/X11/fonts/fontconf.h
75CONFIG_CLEAN_FILES = xfont.pc
76CONFIG_CLEAN_VPATH_FILES =
77AM_V_GEN = $(am__v_GEN_$(V))
78am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
79am__v_GEN_0 = @echo "  GEN   " $@;
80AM_V_at = $(am__v_at_$(V))
81am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
82am__v_at_0 = @
83SOURCES =
84DIST_SOURCES =
85RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
86	html-recursive info-recursive install-data-recursive \
87	install-dvi-recursive install-exec-recursive \
88	install-html-recursive install-info-recursive \
89	install-pdf-recursive install-ps-recursive install-recursive \
90	installcheck-recursive installdirs-recursive pdf-recursive \
91	ps-recursive uninstall-recursive
92am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
93am__vpath_adj = case $$p in \
94    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
95    *) f=$$p;; \
96  esac;
97am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
98am__install_max = 40
99am__nobase_strip_setup = \
100  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
101am__nobase_strip = \
102  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
103am__nobase_list = $(am__nobase_strip_setup); \
104  for p in $$list; do echo "$$p $$p"; done | \
105  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
106  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
107    if (++n[$$2] == $(am__install_max)) \
108      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
109    END { for (dir in files) print dir, files[dir] }'
110am__base_list = \
111  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
112  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
113am__installdirs = "$(DESTDIR)$(pkgconfigdir)" \
114	"$(DESTDIR)$(libXfontincludedir)" \
115	"$(DESTDIR)$(libXfontincludedir)"
116DATA = $(pkgconfig_DATA)
117HEADERS = $(libXfontinclude_HEADERS) $(nodist_libXfontinclude_HEADERS)
118RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
119  distclean-recursive maintainer-clean-recursive
120AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
121	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
122	distdir dist dist-all distcheck
123ETAGS = etags
124CTAGS = ctags
125DIST_SUBDIRS = $(SUBDIRS)
126DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
127distdir = $(PACKAGE)-$(VERSION)
128top_distdir = $(distdir)
129am__remove_distdir = \
130  { test ! -d "$(distdir)" \
131    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
132         && rm -fr "$(distdir)"; }; }
133am__relativize = \
134  dir0=`pwd`; \
135  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
136  sed_rest='s,^[^/]*/*,,'; \
137  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
138  sed_butlast='s,/*[^/]*$$,,'; \
139  while test -n "$$dir1"; do \
140    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
141    if test "$$first" != "."; then \
142      if test "$$first" = ".."; then \
143        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
144        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
145      else \
146        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
147        if test "$$first2" = "$$first"; then \
148          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
149        else \
150          dir2="../$$dir2"; \
151        fi; \
152        dir0="$$dir0"/"$$first"; \
153      fi; \
154    fi; \
155    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
156  done; \
157  reldir="$$dir2"
158DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
159GZIP_ENV = --best
160distuninstallcheck_listfiles = find . -type f -print
161distcleancheck_listfiles = find . -type f -print
162ACLOCAL = @ACLOCAL@
163ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
164ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
165AMTAR = @AMTAR@
166AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
167APP_MAN_DIR = @APP_MAN_DIR@
168APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
169AR = @AR@
170AUTOCONF = @AUTOCONF@
171AUTOHEADER = @AUTOHEADER@
172AUTOMAKE = @AUTOMAKE@
173AWK = @AWK@
174BASE_CFLAGS = @BASE_CFLAGS@
175CC = @CC@
176CCDEPMODE = @CCDEPMODE@
177CFLAGS = @CFLAGS@
178CHANGELOG_CMD = @CHANGELOG_CMD@
179CPP = @CPP@
180CPPFLAGS = @CPPFLAGS@
181CWARNFLAGS = @CWARNFLAGS@
182CYGPATH_W = @CYGPATH_W@
183DEFS = @DEFS@
184DEPDIR = @DEPDIR@
185DLLTOOL = @DLLTOOL@
186DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
187DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
188DSYMUTIL = @DSYMUTIL@
189DUMPBIN = @DUMPBIN@
190ECHO_C = @ECHO_C@
191ECHO_N = @ECHO_N@
192ECHO_T = @ECHO_T@
193EGREP = @EGREP@
194EXEEXT = @EXEEXT@
195FGREP = @FGREP@
196FILE_MAN_DIR = @FILE_MAN_DIR@
197FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
198FOP = @FOP@
199FREETYPE_CFLAGS = @FREETYPE_CFLAGS@
200FREETYPE_LIBS = @FREETYPE_LIBS@
201FREETYPE_REQUIRES = @FREETYPE_REQUIRES@
202GREP = @GREP@
203INSTALL = @INSTALL@
204INSTALL_CMD = @INSTALL_CMD@
205INSTALL_DATA = @INSTALL_DATA@
206INSTALL_PROGRAM = @INSTALL_PROGRAM@
207INSTALL_SCRIPT = @INSTALL_SCRIPT@
208INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
209LD = @LD@
210LDFLAGS = @LDFLAGS@
211LIBOBJS = @LIBOBJS@
212LIBS = @LIBS@
213LIBTOOL = @LIBTOOL@
214LIB_MAN_DIR = @LIB_MAN_DIR@
215LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
216LIPO = @LIPO@
217LN_S = @LN_S@
218LTLIBOBJS = @LTLIBOBJS@
219MAINT = @MAINT@
220MAKEINFO = @MAKEINFO@
221MANIFEST_TOOL = @MANIFEST_TOOL@
222MAN_SUBSTS = @MAN_SUBSTS@
223MATH_LIBS = @MATH_LIBS@
224MISC_MAN_DIR = @MISC_MAN_DIR@
225MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
226MKDIR_P = @MKDIR_P@
227NM = @NM@
228NMEDIT = @NMEDIT@
229OBJDUMP = @OBJDUMP@
230OBJEXT = @OBJEXT@
231OS_CFLAGS = @OS_CFLAGS@
232OTOOL = @OTOOL@
233OTOOL64 = @OTOOL64@
234PACKAGE = @PACKAGE@
235PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
236PACKAGE_NAME = @PACKAGE_NAME@
237PACKAGE_STRING = @PACKAGE_STRING@
238PACKAGE_TARNAME = @PACKAGE_TARNAME@
239PACKAGE_URL = @PACKAGE_URL@
240PACKAGE_VERSION = @PACKAGE_VERSION@
241PATH_SEPARATOR = @PATH_SEPARATOR@
242PKG_CONFIG = @PKG_CONFIG@
243RANLIB = @RANLIB@
244SED = @SED@
245SET_MAKE = @SET_MAKE@
246SHELL = @SHELL@
247STRICT_CFLAGS = @STRICT_CFLAGS@
248STRIP = @STRIP@
249STYLESHEET_SRCDIR = @STYLESHEET_SRCDIR@
250VERSION = @VERSION@
251XFONT_CFLAGS = @XFONT_CFLAGS@
252XFONT_LIBS = @XFONT_LIBS@
253XMLTO = @XMLTO@
254XORG_MAN_PAGE = @XORG_MAN_PAGE@
255XORG_SGML_PATH = @XORG_SGML_PATH@
256XSL_STYLESHEET = @XSL_STYLESHEET@
257X_GZIP_FONT_COMPRESSION = @X_GZIP_FONT_COMPRESSION@
258Z_LIBS = @Z_LIBS@
259abs_builddir = @abs_builddir@
260abs_srcdir = @abs_srcdir@
261abs_top_builddir = @abs_top_builddir@
262abs_top_srcdir = @abs_top_srcdir@
263ac_ct_AR = @ac_ct_AR@
264ac_ct_CC = @ac_ct_CC@
265ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
266am__include = @am__include@
267am__leading_dot = @am__leading_dot@
268am__quote = @am__quote@
269am__tar = @am__tar@
270am__untar = @am__untar@
271bindir = @bindir@
272build = @build@
273build_alias = @build_alias@
274build_cpu = @build_cpu@
275build_os = @build_os@
276build_vendor = @build_vendor@
277builddir = @builddir@
278datadir = @datadir@
279datarootdir = @datarootdir@
280docdir = @docdir@
281dvidir = @dvidir@
282exec_prefix = @exec_prefix@
283ft_config = @ft_config@
284host = @host@
285host_alias = @host_alias@
286host_cpu = @host_cpu@
287host_os = @host_os@
288host_vendor = @host_vendor@
289htmldir = @htmldir@
290includedir = @includedir@
291infodir = @infodir@
292install_sh = @install_sh@
293libdir = @libdir@
294libexecdir = @libexecdir@
295localedir = @localedir@
296localstatedir = @localstatedir@
297mandir = @mandir@
298mkdir_p = @mkdir_p@
299oldincludedir = @oldincludedir@
300pdfdir = @pdfdir@
301prefix = @prefix@
302program_transform_name = @program_transform_name@
303psdir = @psdir@
304sbindir = @sbindir@
305sharedstatedir = @sharedstatedir@
306srcdir = @srcdir@
307sysconfdir = @sysconfdir@
308target_alias = @target_alias@
309top_build_prefix = @top_build_prefix@
310top_builddir = @top_builddir@
311top_srcdir = @top_srcdir@
312SUBDIRS = doc src
313libXfontincludedir = $(includedir)/X11/fonts
314libXfontinclude_HEADERS = \
315	include/X11/fonts/bdfint.h   \
316	include/X11/fonts/bitmap.h   \
317	include/X11/fonts/bufio.h    \
318	include/X11/fonts/fntfil.h   \
319	include/X11/fonts/fntfilio.h \
320	include/X11/fonts/fntfilst.h \
321	include/X11/fonts/fontencc.h \
322	include/X11/fonts/fontmisc.h \
323	include/X11/fonts/fontshow.h \
324	include/X11/fonts/fontutil.h \
325	include/X11/fonts/fontxlfd.h \
326	include/X11/fonts/pcf.h      \
327	src/FreeType/ft.h	     \
328	src/FreeType/ftfuncs.h
329
330nodist_libXfontinclude_HEADERS = \
331	include/X11/fonts/fontconf.h
332
333pkgconfigdir = $(libdir)/pkgconfig
334pkgconfig_DATA = xfont.pc
335MAINTAINERCLEANFILES = ChangeLog INSTALL
336all: config.h
337	$(MAKE) $(AM_MAKEFLAGS) all-recursive
338
339.SUFFIXES:
340am--refresh:
341	@:
342$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
343	@for dep in $?; do \
344	  case '$(am__configure_deps)' in \
345	    *$$dep*) \
346	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
347	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
348		&& exit 0; \
349	      exit 1;; \
350	  esac; \
351	done; \
352	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
353	$(am__cd) $(top_srcdir) && \
354	  $(AUTOMAKE) --foreign Makefile
355.PRECIOUS: Makefile
356Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
357	@case '$?' in \
358	  *config.status*) \
359	    echo ' $(SHELL) ./config.status'; \
360	    $(SHELL) ./config.status;; \
361	  *) \
362	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
363	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
364	esac;
365
366$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
367	$(SHELL) ./config.status --recheck
368
369$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
370	$(am__cd) $(srcdir) && $(AUTOCONF)
371$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
372	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
373$(am__aclocal_m4_deps):
374
375config.h: stamp-h1
376	@if test ! -f $@; then \
377	  rm -f stamp-h1; \
378	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
379	else :; fi
380
381stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
382	@rm -f stamp-h1
383	cd $(top_builddir) && $(SHELL) ./config.status config.h
384$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
385	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
386	rm -f stamp-h1
387	touch $@
388
389include/X11/fonts/fontconf.h: include/X11/fonts/stamp-h2
390	@if test ! -f $@; then \
391	  rm -f include/X11/fonts/stamp-h2; \
392	  $(MAKE) $(AM_MAKEFLAGS) include/X11/fonts/stamp-h2; \
393	else :; fi
394
395include/X11/fonts/stamp-h2: $(top_srcdir)/include/X11/fonts/fontconf.h.in $(top_builddir)/config.status
396	@rm -f include/X11/fonts/stamp-h2
397	cd $(top_builddir) && $(SHELL) ./config.status include/X11/fonts/fontconf.h
398
399distclean-hdr:
400	-rm -f config.h stamp-h1 include/X11/fonts/fontconf.h include/X11/fonts/stamp-h2
401xfont.pc: $(top_builddir)/config.status $(srcdir)/xfont.pc.in
402	cd $(top_builddir) && $(SHELL) ./config.status $@
403
404mostlyclean-libtool:
405	-rm -f *.lo
406
407clean-libtool:
408	-rm -rf .libs _libs
409
410distclean-libtool:
411	-rm -f libtool config.lt
412install-pkgconfigDATA: $(pkgconfig_DATA)
413	@$(NORMAL_INSTALL)
414	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
415	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
416	for p in $$list; do \
417	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
418	  echo "$$d$$p"; \
419	done | $(am__base_list) | \
420	while read files; do \
421	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
422	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
423	done
424
425uninstall-pkgconfigDATA:
426	@$(NORMAL_UNINSTALL)
427	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
428	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
429	test -n "$$files" || exit 0; \
430	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
431	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
432install-libXfontincludeHEADERS: $(libXfontinclude_HEADERS)
433	@$(NORMAL_INSTALL)
434	test -z "$(libXfontincludedir)" || $(MKDIR_P) "$(DESTDIR)$(libXfontincludedir)"
435	@list='$(libXfontinclude_HEADERS)'; test -n "$(libXfontincludedir)" || list=; \
436	for p in $$list; do \
437	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
438	  echo "$$d$$p"; \
439	done | $(am__base_list) | \
440	while read files; do \
441	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libXfontincludedir)'"; \
442	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(libXfontincludedir)" || exit $$?; \
443	done
444
445uninstall-libXfontincludeHEADERS:
446	@$(NORMAL_UNINSTALL)
447	@list='$(libXfontinclude_HEADERS)'; test -n "$(libXfontincludedir)" || list=; \
448	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
449	test -n "$$files" || exit 0; \
450	echo " ( cd '$(DESTDIR)$(libXfontincludedir)' && rm -f" $$files ")"; \
451	cd "$(DESTDIR)$(libXfontincludedir)" && rm -f $$files
452install-nodist_libXfontincludeHEADERS: $(nodist_libXfontinclude_HEADERS)
453	@$(NORMAL_INSTALL)
454	test -z "$(libXfontincludedir)" || $(MKDIR_P) "$(DESTDIR)$(libXfontincludedir)"
455	@list='$(nodist_libXfontinclude_HEADERS)'; test -n "$(libXfontincludedir)" || list=; \
456	for p in $$list; do \
457	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
458	  echo "$$d$$p"; \
459	done | $(am__base_list) | \
460	while read files; do \
461	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libXfontincludedir)'"; \
462	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(libXfontincludedir)" || exit $$?; \
463	done
464
465uninstall-nodist_libXfontincludeHEADERS:
466	@$(NORMAL_UNINSTALL)
467	@list='$(nodist_libXfontinclude_HEADERS)'; test -n "$(libXfontincludedir)" || list=; \
468	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
469	test -n "$$files" || exit 0; \
470	echo " ( cd '$(DESTDIR)$(libXfontincludedir)' && rm -f" $$files ")"; \
471	cd "$(DESTDIR)$(libXfontincludedir)" && rm -f $$files
472
473# This directory's subdirectories are mostly independent; you can cd
474# into them and run `make' without going through this Makefile.
475# To change the values of `make' variables: instead of editing Makefiles,
476# (1) if the variable is set in `config.status', edit `config.status'
477#     (which will cause the Makefiles to be regenerated when you run `make');
478# (2) otherwise, pass the desired values on the `make' command line.
479$(RECURSIVE_TARGETS):
480	@fail= failcom='exit 1'; \
481	for f in x $$MAKEFLAGS; do \
482	  case $$f in \
483	    *=* | --[!k]*);; \
484	    *k*) failcom='fail=yes';; \
485	  esac; \
486	done; \
487	dot_seen=no; \
488	target=`echo $@ | sed s/-recursive//`; \
489	list='$(SUBDIRS)'; for subdir in $$list; do \
490	  echo "Making $$target in $$subdir"; \
491	  if test "$$subdir" = "."; then \
492	    dot_seen=yes; \
493	    local_target="$$target-am"; \
494	  else \
495	    local_target="$$target"; \
496	  fi; \
497	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
498	  || eval $$failcom; \
499	done; \
500	if test "$$dot_seen" = "no"; then \
501	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
502	fi; test -z "$$fail"
503
504$(RECURSIVE_CLEAN_TARGETS):
505	@fail= failcom='exit 1'; \
506	for f in x $$MAKEFLAGS; do \
507	  case $$f in \
508	    *=* | --[!k]*);; \
509	    *k*) failcom='fail=yes';; \
510	  esac; \
511	done; \
512	dot_seen=no; \
513	case "$@" in \
514	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
515	  *) list='$(SUBDIRS)' ;; \
516	esac; \
517	rev=''; for subdir in $$list; do \
518	  if test "$$subdir" = "."; then :; else \
519	    rev="$$subdir $$rev"; \
520	  fi; \
521	done; \
522	rev="$$rev ."; \
523	target=`echo $@ | sed s/-recursive//`; \
524	for subdir in $$rev; do \
525	  echo "Making $$target in $$subdir"; \
526	  if test "$$subdir" = "."; then \
527	    local_target="$$target-am"; \
528	  else \
529	    local_target="$$target"; \
530	  fi; \
531	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
532	  || eval $$failcom; \
533	done && test -z "$$fail"
534tags-recursive:
535	list='$(SUBDIRS)'; for subdir in $$list; do \
536	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
537	done
538ctags-recursive:
539	list='$(SUBDIRS)'; for subdir in $$list; do \
540	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
541	done
542
543ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
544	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
545	unique=`for i in $$list; do \
546	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
547	  done | \
548	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
549	      END { if (nonempty) { for (i in files) print i; }; }'`; \
550	mkid -fID $$unique
551tags: TAGS
552
553TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
554		$(TAGS_FILES) $(LISP)
555	set x; \
556	here=`pwd`; \
557	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
558	  include_option=--etags-include; \
559	  empty_fix=.; \
560	else \
561	  include_option=--include; \
562	  empty_fix=; \
563	fi; \
564	list='$(SUBDIRS)'; for subdir in $$list; do \
565	  if test "$$subdir" = .; then :; else \
566	    test ! -f $$subdir/TAGS || \
567	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
568	  fi; \
569	done; \
570	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
571	unique=`for i in $$list; do \
572	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
573	  done | \
574	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
575	      END { if (nonempty) { for (i in files) print i; }; }'`; \
576	shift; \
577	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
578	  test -n "$$unique" || unique=$$empty_fix; \
579	  if test $$# -gt 0; then \
580	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
581	      "$$@" $$unique; \
582	  else \
583	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
584	      $$unique; \
585	  fi; \
586	fi
587ctags: CTAGS
588CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
589		$(TAGS_FILES) $(LISP)
590	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
591	unique=`for i in $$list; do \
592	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
593	  done | \
594	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
595	      END { if (nonempty) { for (i in files) print i; }; }'`; \
596	test -z "$(CTAGS_ARGS)$$unique" \
597	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
598	     $$unique
599
600GTAGS:
601	here=`$(am__cd) $(top_builddir) && pwd` \
602	  && $(am__cd) $(top_srcdir) \
603	  && gtags -i $(GTAGS_ARGS) "$$here"
604
605distclean-tags:
606	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
607
608distdir: $(DISTFILES)
609	$(am__remove_distdir)
610	test -d "$(distdir)" || mkdir "$(distdir)"
611	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
612	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
613	list='$(DISTFILES)'; \
614	  dist_files=`for file in $$list; do echo $$file; done | \
615	  sed -e "s|^$$srcdirstrip/||;t" \
616	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
617	case $$dist_files in \
618	  */*) $(MKDIR_P) `echo "$$dist_files" | \
619			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
620			   sort -u` ;; \
621	esac; \
622	for file in $$dist_files; do \
623	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
624	  if test -d $$d/$$file; then \
625	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
626	    if test -d "$(distdir)/$$file"; then \
627	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
628	    fi; \
629	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
630	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
631	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
632	    fi; \
633	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
634	  else \
635	    test -f "$(distdir)/$$file" \
636	    || cp -p $$d/$$file "$(distdir)/$$file" \
637	    || exit 1; \
638	  fi; \
639	done
640	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
641	  if test "$$subdir" = .; then :; else \
642	    test -d "$(distdir)/$$subdir" \
643	    || $(MKDIR_P) "$(distdir)/$$subdir" \
644	    || exit 1; \
645	  fi; \
646	done
647	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
648	  if test "$$subdir" = .; then :; else \
649	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
650	    $(am__relativize); \
651	    new_distdir=$$reldir; \
652	    dir1=$$subdir; dir2="$(top_distdir)"; \
653	    $(am__relativize); \
654	    new_top_distdir=$$reldir; \
655	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
656	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
657	    ($(am__cd) $$subdir && \
658	      $(MAKE) $(AM_MAKEFLAGS) \
659	        top_distdir="$$new_top_distdir" \
660	        distdir="$$new_distdir" \
661		am__remove_distdir=: \
662		am__skip_length_check=: \
663		am__skip_mode_fix=: \
664	        distdir) \
665	      || exit 1; \
666	  fi; \
667	done
668	$(MAKE) $(AM_MAKEFLAGS) \
669	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
670	  dist-hook
671	-test -n "$(am__skip_mode_fix)" \
672	|| find "$(distdir)" -type d ! -perm -755 \
673		-exec chmod u+rwx,go+rx {} \; -o \
674	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
675	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
676	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
677	|| chmod -R a+r "$(distdir)"
678dist-gzip: distdir
679	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
680	$(am__remove_distdir)
681dist-bzip2: distdir
682	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
683	$(am__remove_distdir)
684
685dist-lzma: distdir
686	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
687	$(am__remove_distdir)
688
689dist-xz: distdir
690	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
691	$(am__remove_distdir)
692
693dist-tarZ: distdir
694	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
695	$(am__remove_distdir)
696
697dist-shar: distdir
698	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
699	$(am__remove_distdir)
700
701dist-zip: distdir
702	-rm -f $(distdir).zip
703	zip -rq $(distdir).zip $(distdir)
704	$(am__remove_distdir)
705
706dist dist-all: distdir
707	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
708	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
709	$(am__remove_distdir)
710
711# This target untars the dist file and tries a VPATH configuration.  Then
712# it guarantees that the distribution is self-contained by making another
713# tarfile.
714distcheck: dist
715	case '$(DIST_ARCHIVES)' in \
716	*.tar.gz*) \
717	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
718	*.tar.bz2*) \
719	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
720	*.tar.lzma*) \
721	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
722	*.tar.xz*) \
723	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
724	*.tar.Z*) \
725	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
726	*.shar.gz*) \
727	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
728	*.zip*) \
729	  unzip $(distdir).zip ;;\
730	esac
731	chmod -R a-w $(distdir); chmod a+w $(distdir)
732	mkdir $(distdir)/_build
733	mkdir $(distdir)/_inst
734	chmod a-w $(distdir)
735	test -d $(distdir)/_build || exit 0; \
736	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
737	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
738	  && am__cwd=`pwd` \
739	  && $(am__cd) $(distdir)/_build \
740	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
741	    $(DISTCHECK_CONFIGURE_FLAGS) \
742	  && $(MAKE) $(AM_MAKEFLAGS) \
743	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
744	  && $(MAKE) $(AM_MAKEFLAGS) check \
745	  && $(MAKE) $(AM_MAKEFLAGS) install \
746	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
747	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
748	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
749	        distuninstallcheck \
750	  && chmod -R a-w "$$dc_install_base" \
751	  && ({ \
752	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
753	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
754	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
755	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
756	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
757	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
758	  && rm -rf "$$dc_destdir" \
759	  && $(MAKE) $(AM_MAKEFLAGS) dist \
760	  && rm -rf $(DIST_ARCHIVES) \
761	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
762	  && cd "$$am__cwd" \
763	  || exit 1
764	$(am__remove_distdir)
765	@(echo "$(distdir) archives ready for distribution: "; \
766	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
767	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
768distuninstallcheck:
769	@$(am__cd) '$(distuninstallcheck_dir)' \
770	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
771	   || { echo "ERROR: files left after uninstall:" ; \
772	        if test -n "$(DESTDIR)"; then \
773	          echo "  (check DESTDIR support)"; \
774	        fi ; \
775	        $(distuninstallcheck_listfiles) ; \
776	        exit 1; } >&2
777distcleancheck: distclean
778	@if test '$(srcdir)' = . ; then \
779	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
780	  exit 1 ; \
781	fi
782	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
783	  || { echo "ERROR: files left in build directory after distclean:" ; \
784	       $(distcleancheck_listfiles) ; \
785	       exit 1; } >&2
786check-am: all-am
787check: check-recursive
788all-am: Makefile $(DATA) $(HEADERS) config.h
789installdirs: installdirs-recursive
790installdirs-am:
791	for dir in "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(libXfontincludedir)" "$(DESTDIR)$(libXfontincludedir)"; do \
792	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
793	done
794install: install-recursive
795install-exec: install-exec-recursive
796install-data: install-data-recursive
797uninstall: uninstall-recursive
798
799install-am: all-am
800	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
801
802installcheck: installcheck-recursive
803install-strip:
804	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
805	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
806	  `test -z '$(STRIP)' || \
807	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
808mostlyclean-generic:
809
810clean-generic:
811
812distclean-generic:
813	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
814	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
815
816maintainer-clean-generic:
817	@echo "This command is intended for maintainers to use"
818	@echo "it deletes files that may require special tools to rebuild."
819	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
820clean: clean-recursive
821
822clean-am: clean-generic clean-libtool mostlyclean-am
823
824distclean: distclean-recursive
825	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
826	-rm -f Makefile
827distclean-am: clean-am distclean-generic distclean-hdr \
828	distclean-libtool distclean-tags
829
830dvi: dvi-recursive
831
832dvi-am:
833
834html: html-recursive
835
836html-am:
837
838info: info-recursive
839
840info-am:
841
842install-data-am: install-libXfontincludeHEADERS \
843	install-nodist_libXfontincludeHEADERS install-pkgconfigDATA
844
845install-dvi: install-dvi-recursive
846
847install-dvi-am:
848
849install-exec-am:
850
851install-html: install-html-recursive
852
853install-html-am:
854
855install-info: install-info-recursive
856
857install-info-am:
858
859install-man:
860
861install-pdf: install-pdf-recursive
862
863install-pdf-am:
864
865install-ps: install-ps-recursive
866
867install-ps-am:
868
869installcheck-am:
870
871maintainer-clean: maintainer-clean-recursive
872	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
873	-rm -rf $(top_srcdir)/autom4te.cache
874	-rm -f Makefile
875maintainer-clean-am: distclean-am maintainer-clean-generic
876
877mostlyclean: mostlyclean-recursive
878
879mostlyclean-am: mostlyclean-generic mostlyclean-libtool
880
881pdf: pdf-recursive
882
883pdf-am:
884
885ps: ps-recursive
886
887ps-am:
888
889uninstall-am: uninstall-libXfontincludeHEADERS \
890	uninstall-nodist_libXfontincludeHEADERS \
891	uninstall-pkgconfigDATA
892
893.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
894	ctags-recursive install-am install-strip tags-recursive
895
896.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
897	all all-am am--refresh check check-am clean clean-generic \
898	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
899	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
900	dist-zip distcheck distclean distclean-generic distclean-hdr \
901	distclean-libtool distclean-tags distcleancheck distdir \
902	distuninstallcheck dvi dvi-am html html-am info info-am \
903	install install-am install-data install-data-am install-dvi \
904	install-dvi-am install-exec install-exec-am install-html \
905	install-html-am install-info install-info-am \
906	install-libXfontincludeHEADERS install-man \
907	install-nodist_libXfontincludeHEADERS install-pdf \
908	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
909	install-strip installcheck installcheck-am installdirs \
910	installdirs-am maintainer-clean maintainer-clean-generic \
911	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
912	ps ps-am tags tags-recursive uninstall uninstall-am \
913	uninstall-libXfontincludeHEADERS \
914	uninstall-nodist_libXfontincludeHEADERS \
915	uninstall-pkgconfigDATA
916
917
918.PHONY: ChangeLog INSTALL
919
920INSTALL:
921	$(INSTALL_CMD)
922
923ChangeLog:
924	$(CHANGELOG_CMD)
925
926dist-hook: ChangeLog INSTALL
927
928# Tell versions [3.59,3.63) of GNU make to not export all variables.
929# Otherwise a system limit (for SysV at least) may be exceeded.
930.NOEXPORT:
931