Makefile.in revision b3062210 
1# Makefile.in generated by automake 1.11 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18# 
19#  Copyright © 2003 Keith Packard, Noah Levitt
20# 
21#  Permission to use, copy, modify, distribute, and sell this software and its
22#  documentation for any purpose is hereby granted without fee, provided that
23#  the above copyright notice appear in all copies and that both that
24#  copyright notice and this permission notice appear in supporting
25#  documentation, and that the name of Keith Packard not be used in
26#  advertising or publicity pertaining to distribution of the software without
27#  specific, written prior permission.  Keith Packard makes no
28#  representations about the suitability of this software for any purpose.  It
29#  is provided "as is" without express or implied warranty.
30# 
31#  KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
32#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
33#  EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
34#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
35#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
36#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
37#  PERFORMANCE OF THIS SOFTWARE.
38
39
40VPATH = @srcdir@
41pkgdatadir = $(datadir)/@PACKAGE@
42pkgincludedir = $(includedir)/@PACKAGE@
43pkglibdir = $(libdir)/@PACKAGE@
44pkglibexecdir = $(libexecdir)/@PACKAGE@
45am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
46install_sh_DATA = $(install_sh) -c -m 644
47install_sh_PROGRAM = $(install_sh) -c
48install_sh_SCRIPT = $(install_sh) -c
49INSTALL_HEADER = $(INSTALL_DATA)
50transform = $(program_transform_name)
51NORMAL_INSTALL = :
52PRE_INSTALL = :
53POST_INSTALL = :
54NORMAL_UNINSTALL = :
55PRE_UNINSTALL = :
56POST_UNINSTALL = :
57build_triplet = @build@
58host_triplet = @host@
59subdir = .
60DIST_COMMON = README $(am__configure_deps) $(libXfontinclude_HEADERS) \
61	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
62	$(srcdir)/config.h.in $(srcdir)/xfont.pc.in \
63	$(top_srcdir)/configure \
64	$(top_srcdir)/include/X11/fonts/fontconf.h.in AUTHORS COPYING \
65	ChangeLog config.guess config.sub depcomp install-sh ltmain.sh \
66	missing
67ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
68am__aclocal_m4_deps = $(top_srcdir)/configure.ac
69am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
70	$(ACLOCAL_M4)
71am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
72 configure.lineno config.status.lineno
73mkinstalldirs = $(install_sh) -d
74CONFIG_HEADER = config.h $(top_builddir)/include/X11/fonts/fontconf.h
75CONFIG_CLEAN_FILES = xfont.pc
76CONFIG_CLEAN_VPATH_FILES =
77AM_V_GEN = $(am__v_GEN_$(V))
78am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
79am__v_GEN_0 = @echo "  GEN   " $@;
80AM_V_at = $(am__v_at_$(V))
81am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
82am__v_at_0 = @
83SOURCES =
84DIST_SOURCES =
85RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
86	html-recursive info-recursive install-data-recursive \
87	install-dvi-recursive install-exec-recursive \
88	install-html-recursive install-info-recursive \
89	install-pdf-recursive install-ps-recursive install-recursive \
90	installcheck-recursive installdirs-recursive pdf-recursive \
91	ps-recursive uninstall-recursive
92am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
93am__vpath_adj = case $$p in \
94    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
95    *) f=$$p;; \
96  esac;
97am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
98am__install_max = 40
99am__nobase_strip_setup = \
100  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
101am__nobase_strip = \
102  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
103am__nobase_list = $(am__nobase_strip_setup); \
104  for p in $$list; do echo "$$p $$p"; done | \
105  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
106  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
107    if (++n[$$2] == $(am__install_max)) \
108      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
109    END { for (dir in files) print dir, files[dir] }'
110am__base_list = \
111  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
112  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
113am__installdirs = "$(DESTDIR)$(pkgconfigdir)" \
114	"$(DESTDIR)$(libXfontincludedir)" \
115	"$(DESTDIR)$(libXfontincludedir)"
116DATA = $(noinst_DATA) $(pkgconfig_DATA)
117HEADERS = $(libXfontinclude_HEADERS) $(nodist_libXfontinclude_HEADERS)
118RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
119  distclean-recursive maintainer-clean-recursive
120AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
121	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
122	distdir dist dist-all distcheck
123ETAGS = etags
124CTAGS = ctags
125DIST_SUBDIRS = $(SUBDIRS)
126DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
127distdir = $(PACKAGE)-$(VERSION)
128top_distdir = $(distdir)
129am__remove_distdir = \
130  { test ! -d "$(distdir)" \
131    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
132         && rm -fr "$(distdir)"; }; }
133am__relativize = \
134  dir0=`pwd`; \
135  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
136  sed_rest='s,^[^/]*/*,,'; \
137  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
138  sed_butlast='s,/*[^/]*$$,,'; \
139  while test -n "$$dir1"; do \
140    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
141    if test "$$first" != "."; then \
142      if test "$$first" = ".."; then \
143        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
144        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
145      else \
146        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
147        if test "$$first2" = "$$first"; then \
148          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
149        else \
150          dir2="../$$dir2"; \
151        fi; \
152        dir0="$$dir0"/"$$first"; \
153      fi; \
154    fi; \
155    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
156  done; \
157  reldir="$$dir2"
158DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
159GZIP_ENV = --best
160distuninstallcheck_listfiles = find . -type f -print
161ACLOCAL = @ACLOCAL@
162ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
163ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
164AMTAR = @AMTAR@
165AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
166APP_MAN_DIR = @APP_MAN_DIR@
167APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
168AR = @AR@
169AUTOCONF = @AUTOCONF@
170AUTOHEADER = @AUTOHEADER@
171AUTOMAKE = @AUTOMAKE@
172AWK = @AWK@
173CC = @CC@
174CCDEPMODE = @CCDEPMODE@
175CFLAGS = @CFLAGS@
176CHANGELOG_CMD = @CHANGELOG_CMD@
177CPP = @CPP@
178CPPFLAGS = @CPPFLAGS@
179CWARNFLAGS = @CWARNFLAGS@
180CXX = @CXX@
181CXXCPP = @CXXCPP@
182CXXDEPMODE = @CXXDEPMODE@
183CXXFLAGS = @CXXFLAGS@
184CYGPATH_W = @CYGPATH_W@
185DEFS = @DEFS@
186DEPDIR = @DEPDIR@
187DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
188DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
189DSYMUTIL = @DSYMUTIL@
190ECHO = @ECHO@
191ECHO_C = @ECHO_C@
192ECHO_N = @ECHO_N@
193ECHO_T = @ECHO_T@
194EGREP = @EGREP@
195EXEEXT = @EXEEXT@
196F77 = @F77@
197FFLAGS = @FFLAGS@
198FILE_MAN_DIR = @FILE_MAN_DIR@
199FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
200FREETYPE_CFLAGS = @FREETYPE_CFLAGS@
201FREETYPE_LIBS = @FREETYPE_LIBS@
202FREETYPE_REQUIRES = @FREETYPE_REQUIRES@
203GREP = @GREP@
204INSTALL = @INSTALL@
205INSTALL_DATA = @INSTALL_DATA@
206INSTALL_PROGRAM = @INSTALL_PROGRAM@
207INSTALL_SCRIPT = @INSTALL_SCRIPT@
208INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
209LDFLAGS = @LDFLAGS@
210LIBOBJS = @LIBOBJS@
211LIBS = @LIBS@
212LIBTOOL = @LIBTOOL@
213LIB_MAN_DIR = @LIB_MAN_DIR@
214LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
215LN_S = @LN_S@
216LTLIBOBJS = @LTLIBOBJS@
217MAKEINFO = @MAKEINFO@
218MATH_LIBS = @MATH_LIBS@
219MISC_MAN_DIR = @MISC_MAN_DIR@
220MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
221MKDIR_P = @MKDIR_P@
222NMEDIT = @NMEDIT@
223OBJEXT = @OBJEXT@
224OS_CFLAGS = @OS_CFLAGS@
225PACKAGE = @PACKAGE@
226PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
227PACKAGE_NAME = @PACKAGE_NAME@
228PACKAGE_STRING = @PACKAGE_STRING@
229PACKAGE_TARNAME = @PACKAGE_TARNAME@
230PACKAGE_VERSION = @PACKAGE_VERSION@
231PATH_SEPARATOR = @PATH_SEPARATOR@
232PKG_CONFIG = @PKG_CONFIG@
233RANLIB = @RANLIB@
234SED = @SED@
235SET_MAKE = @SET_MAKE@
236SHELL = @SHELL@
237STRIP = @STRIP@
238VERSION = @VERSION@
239XFONT_CFLAGS = @XFONT_CFLAGS@
240XFONT_LIBS = @XFONT_LIBS@
241XMLTO = @XMLTO@
242X_GZIP_FONT_COMPRESSION = @X_GZIP_FONT_COMPRESSION@
243Z_LIBS = @Z_LIBS@
244abs_builddir = @abs_builddir@
245abs_srcdir = @abs_srcdir@
246abs_top_builddir = @abs_top_builddir@
247abs_top_srcdir = @abs_top_srcdir@
248ac_ct_CC = @ac_ct_CC@
249ac_ct_CXX = @ac_ct_CXX@
250ac_ct_F77 = @ac_ct_F77@
251am__include = @am__include@
252am__leading_dot = @am__leading_dot@
253am__quote = @am__quote@
254am__tar = @am__tar@
255am__untar = @am__untar@
256bindir = @bindir@
257build = @build@
258build_alias = @build_alias@
259build_cpu = @build_cpu@
260build_os = @build_os@
261build_vendor = @build_vendor@
262builddir = @builddir@
263datadir = @datadir@
264datarootdir = @datarootdir@
265distcleancheck_listfiles = @distcleancheck_listfiles@
266docdir = @docdir@
267dvidir = @dvidir@
268exec_prefix = @exec_prefix@
269ft_config = @ft_config@
270host = @host@
271host_alias = @host_alias@
272host_cpu = @host_cpu@
273host_os = @host_os@
274host_vendor = @host_vendor@
275htmldir = @htmldir@
276includedir = @includedir@
277infodir = @infodir@
278install_sh = @install_sh@
279libdir = @libdir@
280libexecdir = @libexecdir@
281localedir = @localedir@
282localstatedir = @localstatedir@
283mandir = @mandir@
284mkdir_p = @mkdir_p@
285oldincludedir = @oldincludedir@
286pdfdir = @pdfdir@
287prefix = @prefix@
288program_transform_name = @program_transform_name@
289psdir = @psdir@
290sbindir = @sbindir@
291sharedstatedir = @sharedstatedir@
292srcdir = @srcdir@
293sysconfdir = @sysconfdir@
294target_alias = @target_alias@
295top_build_prefix = @top_build_prefix@
296top_builddir = @top_builddir@
297top_srcdir = @top_srcdir@
298SUBDIRS = src
299libXfontincludedir = $(includedir)/X11/fonts
300libXfontinclude_HEADERS = \
301	include/X11/fonts/bdfint.h   \
302	include/X11/fonts/bitmap.h   \
303	include/X11/fonts/bufio.h    \
304	include/X11/fonts/fntfil.h   \
305	include/X11/fonts/fntfilio.h \
306	include/X11/fonts/fntfilst.h \
307	include/X11/fonts/fontencc.h \
308	include/X11/fonts/fontmisc.h \
309	include/X11/fonts/fontshow.h \
310	include/X11/fonts/fontutil.h \
311	include/X11/fonts/fontxlfd.h \
312	include/X11/fonts/pcf.h      \
313	src/FreeType/ft.h	     \
314	src/FreeType/ftfuncs.h
315
316nodist_libXfontinclude_HEADERS = \
317	include/X11/fonts/fontconf.h
318
319pkgconfigdir = $(libdir)/pkgconfig
320pkgconfig_DATA = xfont.pc
321
322# Developer documentation - not installed on system
323EXTRA_DIST = xfont.pc.in ChangeLog include/X11/fonts/fontconf.h.in \
324	doc/fontlib.xml doc/fontlib.xsl doc/fontlib.css
325@HAVE_XMLTO_TRUE@@MAKE_DEVEL_DOCS_TRUE@noinst_DATA = doc/fontlib.txt doc/fontlib.html $(srcdir)/doc/fontlib.css
326@HAVE_XMLTO_TRUE@@MAKE_DEVEL_DOCS_TRUE@CLEANFILES = doc/fontlib.txt doc/fontlib.html doc/fontlib.pdf doc/fontlib.ps
327all: config.h
328	$(MAKE) $(AM_MAKEFLAGS) all-recursive
329
330.SUFFIXES:
331am--refresh:
332	@:
333$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
334	@for dep in $?; do \
335	  case '$(am__configure_deps)' in \
336	    *$$dep*) \
337	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
338	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
339		&& exit 0; \
340	      exit 1;; \
341	  esac; \
342	done; \
343	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
344	$(am__cd) $(top_srcdir) && \
345	  $(AUTOMAKE) --foreign Makefile
346.PRECIOUS: Makefile
347Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
348	@case '$?' in \
349	  *config.status*) \
350	    echo ' $(SHELL) ./config.status'; \
351	    $(SHELL) ./config.status;; \
352	  *) \
353	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
354	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
355	esac;
356
357$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
358	$(SHELL) ./config.status --recheck
359
360$(top_srcdir)/configure:  $(am__configure_deps)
361	$(am__cd) $(srcdir) && $(AUTOCONF)
362$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
363	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
364$(am__aclocal_m4_deps):
365
366config.h: stamp-h1
367	@if test ! -f $@; then \
368	  rm -f stamp-h1; \
369	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
370	else :; fi
371
372stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
373	@rm -f stamp-h1
374	cd $(top_builddir) && $(SHELL) ./config.status config.h
375$(srcdir)/config.h.in:  $(am__configure_deps) 
376	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
377	rm -f stamp-h1
378	touch $@
379
380include/X11/fonts/fontconf.h: include/X11/fonts/stamp-h2
381	@if test ! -f $@; then \
382	  rm -f include/X11/fonts/stamp-h2; \
383	  $(MAKE) $(AM_MAKEFLAGS) include/X11/fonts/stamp-h2; \
384	else :; fi
385
386include/X11/fonts/stamp-h2: $(top_srcdir)/include/X11/fonts/fontconf.h.in $(top_builddir)/config.status
387	@rm -f include/X11/fonts/stamp-h2
388	cd $(top_builddir) && $(SHELL) ./config.status include/X11/fonts/fontconf.h
389
390distclean-hdr:
391	-rm -f config.h stamp-h1 include/X11/fonts/fontconf.h include/X11/fonts/stamp-h2
392xfont.pc: $(top_builddir)/config.status $(srcdir)/xfont.pc.in
393	cd $(top_builddir) && $(SHELL) ./config.status $@
394
395mostlyclean-libtool:
396	-rm -f *.lo
397
398clean-libtool:
399	-rm -rf .libs _libs
400
401distclean-libtool:
402	-rm -f libtool config.lt
403install-pkgconfigDATA: $(pkgconfig_DATA)
404	@$(NORMAL_INSTALL)
405	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
406	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
407	for p in $$list; do \
408	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
409	  echo "$$d$$p"; \
410	done | $(am__base_list) | \
411	while read files; do \
412	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
413	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
414	done
415
416uninstall-pkgconfigDATA:
417	@$(NORMAL_UNINSTALL)
418	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
419	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
420	test -n "$$files" || exit 0; \
421	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
422	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
423install-libXfontincludeHEADERS: $(libXfontinclude_HEADERS)
424	@$(NORMAL_INSTALL)
425	test -z "$(libXfontincludedir)" || $(MKDIR_P) "$(DESTDIR)$(libXfontincludedir)"
426	@list='$(libXfontinclude_HEADERS)'; test -n "$(libXfontincludedir)" || list=; \
427	for p in $$list; do \
428	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
429	  echo "$$d$$p"; \
430	done | $(am__base_list) | \
431	while read files; do \
432	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libXfontincludedir)'"; \
433	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(libXfontincludedir)" || exit $$?; \
434	done
435
436uninstall-libXfontincludeHEADERS:
437	@$(NORMAL_UNINSTALL)
438	@list='$(libXfontinclude_HEADERS)'; test -n "$(libXfontincludedir)" || list=; \
439	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
440	test -n "$$files" || exit 0; \
441	echo " ( cd '$(DESTDIR)$(libXfontincludedir)' && rm -f" $$files ")"; \
442	cd "$(DESTDIR)$(libXfontincludedir)" && rm -f $$files
443install-nodist_libXfontincludeHEADERS: $(nodist_libXfontinclude_HEADERS)
444	@$(NORMAL_INSTALL)
445	test -z "$(libXfontincludedir)" || $(MKDIR_P) "$(DESTDIR)$(libXfontincludedir)"
446	@list='$(nodist_libXfontinclude_HEADERS)'; test -n "$(libXfontincludedir)" || list=; \
447	for p in $$list; do \
448	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
449	  echo "$$d$$p"; \
450	done | $(am__base_list) | \
451	while read files; do \
452	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libXfontincludedir)'"; \
453	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(libXfontincludedir)" || exit $$?; \
454	done
455
456uninstall-nodist_libXfontincludeHEADERS:
457	@$(NORMAL_UNINSTALL)
458	@list='$(nodist_libXfontinclude_HEADERS)'; test -n "$(libXfontincludedir)" || list=; \
459	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
460	test -n "$$files" || exit 0; \
461	echo " ( cd '$(DESTDIR)$(libXfontincludedir)' && rm -f" $$files ")"; \
462	cd "$(DESTDIR)$(libXfontincludedir)" && rm -f $$files
463
464# This directory's subdirectories are mostly independent; you can cd
465# into them and run `make' without going through this Makefile.
466# To change the values of `make' variables: instead of editing Makefiles,
467# (1) if the variable is set in `config.status', edit `config.status'
468#     (which will cause the Makefiles to be regenerated when you run `make');
469# (2) otherwise, pass the desired values on the `make' command line.
470$(RECURSIVE_TARGETS):
471	@failcom='exit 1'; \
472	for f in x $$MAKEFLAGS; do \
473	  case $$f in \
474	    *=* | --[!k]*);; \
475	    *k*) failcom='fail=yes';; \
476	  esac; \
477	done; \
478	dot_seen=no; \
479	target=`echo $@ | sed s/-recursive//`; \
480	list='$(SUBDIRS)'; for subdir in $$list; do \
481	  echo "Making $$target in $$subdir"; \
482	  if test "$$subdir" = "."; then \
483	    dot_seen=yes; \
484	    local_target="$$target-am"; \
485	  else \
486	    local_target="$$target"; \
487	  fi; \
488	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
489	  || eval $$failcom; \
490	done; \
491	if test "$$dot_seen" = "no"; then \
492	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
493	fi; test -z "$$fail"
494
495$(RECURSIVE_CLEAN_TARGETS):
496	@failcom='exit 1'; \
497	for f in x $$MAKEFLAGS; do \
498	  case $$f in \
499	    *=* | --[!k]*);; \
500	    *k*) failcom='fail=yes';; \
501	  esac; \
502	done; \
503	dot_seen=no; \
504	case "$@" in \
505	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
506	  *) list='$(SUBDIRS)' ;; \
507	esac; \
508	rev=''; for subdir in $$list; do \
509	  if test "$$subdir" = "."; then :; else \
510	    rev="$$subdir $$rev"; \
511	  fi; \
512	done; \
513	rev="$$rev ."; \
514	target=`echo $@ | sed s/-recursive//`; \
515	for subdir in $$rev; do \
516	  echo "Making $$target in $$subdir"; \
517	  if test "$$subdir" = "."; then \
518	    local_target="$$target-am"; \
519	  else \
520	    local_target="$$target"; \
521	  fi; \
522	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
523	  || eval $$failcom; \
524	done && test -z "$$fail"
525tags-recursive:
526	list='$(SUBDIRS)'; for subdir in $$list; do \
527	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
528	done
529ctags-recursive:
530	list='$(SUBDIRS)'; for subdir in $$list; do \
531	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
532	done
533
534ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
535	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
536	unique=`for i in $$list; do \
537	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
538	  done | \
539	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
540	      END { if (nonempty) { for (i in files) print i; }; }'`; \
541	mkid -fID $$unique
542tags: TAGS
543
544TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
545		$(TAGS_FILES) $(LISP)
546	set x; \
547	here=`pwd`; \
548	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
549	  include_option=--etags-include; \
550	  empty_fix=.; \
551	else \
552	  include_option=--include; \
553	  empty_fix=; \
554	fi; \
555	list='$(SUBDIRS)'; for subdir in $$list; do \
556	  if test "$$subdir" = .; then :; else \
557	    test ! -f $$subdir/TAGS || \
558	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
559	  fi; \
560	done; \
561	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
562	unique=`for i in $$list; do \
563	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
564	  done | \
565	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
566	      END { if (nonempty) { for (i in files) print i; }; }'`; \
567	shift; \
568	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
569	  test -n "$$unique" || unique=$$empty_fix; \
570	  if test $$# -gt 0; then \
571	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
572	      "$$@" $$unique; \
573	  else \
574	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
575	      $$unique; \
576	  fi; \
577	fi
578ctags: CTAGS
579CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
580		$(TAGS_FILES) $(LISP)
581	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
582	unique=`for i in $$list; do \
583	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
584	  done | \
585	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
586	      END { if (nonempty) { for (i in files) print i; }; }'`; \
587	test -z "$(CTAGS_ARGS)$$unique" \
588	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
589	     $$unique
590
591GTAGS:
592	here=`$(am__cd) $(top_builddir) && pwd` \
593	  && $(am__cd) $(top_srcdir) \
594	  && gtags -i $(GTAGS_ARGS) "$$here"
595
596distclean-tags:
597	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
598
599distdir: $(DISTFILES)
600	$(am__remove_distdir)
601	test -d "$(distdir)" || mkdir "$(distdir)"
602	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
603	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
604	list='$(DISTFILES)'; \
605	  dist_files=`for file in $$list; do echo $$file; done | \
606	  sed -e "s|^$$srcdirstrip/||;t" \
607	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
608	case $$dist_files in \
609	  */*) $(MKDIR_P) `echo "$$dist_files" | \
610			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
611			   sort -u` ;; \
612	esac; \
613	for file in $$dist_files; do \
614	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
615	  if test -d $$d/$$file; then \
616	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
617	    if test -d "$(distdir)/$$file"; then \
618	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
619	    fi; \
620	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
621	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
622	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
623	    fi; \
624	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
625	  else \
626	    test -f "$(distdir)/$$file" \
627	    || cp -p $$d/$$file "$(distdir)/$$file" \
628	    || exit 1; \
629	  fi; \
630	done
631	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
632	  if test "$$subdir" = .; then :; else \
633	    test -d "$(distdir)/$$subdir" \
634	    || $(MKDIR_P) "$(distdir)/$$subdir" \
635	    || exit 1; \
636	  fi; \
637	done
638	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
639	  if test "$$subdir" = .; then :; else \
640	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
641	    $(am__relativize); \
642	    new_distdir=$$reldir; \
643	    dir1=$$subdir; dir2="$(top_distdir)"; \
644	    $(am__relativize); \
645	    new_top_distdir=$$reldir; \
646	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
647	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
648	    ($(am__cd) $$subdir && \
649	      $(MAKE) $(AM_MAKEFLAGS) \
650	        top_distdir="$$new_top_distdir" \
651	        distdir="$$new_distdir" \
652		am__remove_distdir=: \
653		am__skip_length_check=: \
654		am__skip_mode_fix=: \
655	        distdir) \
656	      || exit 1; \
657	  fi; \
658	done
659	$(MAKE) $(AM_MAKEFLAGS) \
660	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
661	  dist-hook
662	-test -n "$(am__skip_mode_fix)" \
663	|| find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
664	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
665	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
666	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
667	|| chmod -R a+r "$(distdir)"
668dist-gzip: distdir
669	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
670	$(am__remove_distdir)
671dist-bzip2: distdir
672	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
673	$(am__remove_distdir)
674
675dist-lzma: distdir
676	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
677	$(am__remove_distdir)
678
679dist-xz: distdir
680	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
681	$(am__remove_distdir)
682
683dist-tarZ: distdir
684	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
685	$(am__remove_distdir)
686
687dist-shar: distdir
688	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
689	$(am__remove_distdir)
690
691dist-zip: distdir
692	-rm -f $(distdir).zip
693	zip -rq $(distdir).zip $(distdir)
694	$(am__remove_distdir)
695
696dist dist-all: distdir
697	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
698	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
699	$(am__remove_distdir)
700
701# This target untars the dist file and tries a VPATH configuration.  Then
702# it guarantees that the distribution is self-contained by making another
703# tarfile.
704distcheck: dist
705	case '$(DIST_ARCHIVES)' in \
706	*.tar.gz*) \
707	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
708	*.tar.bz2*) \
709	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
710	*.tar.lzma*) \
711	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
712	*.tar.xz*) \
713	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
714	*.tar.Z*) \
715	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
716	*.shar.gz*) \
717	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
718	*.zip*) \
719	  unzip $(distdir).zip ;;\
720	esac
721	chmod -R a-w $(distdir); chmod a+w $(distdir)
722	mkdir $(distdir)/_build
723	mkdir $(distdir)/_inst
724	chmod a-w $(distdir)
725	test -d $(distdir)/_build || exit 0; \
726	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
727	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
728	  && am__cwd=`pwd` \
729	  && $(am__cd) $(distdir)/_build \
730	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
731	    $(DISTCHECK_CONFIGURE_FLAGS) \
732	  && $(MAKE) $(AM_MAKEFLAGS) \
733	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
734	  && $(MAKE) $(AM_MAKEFLAGS) check \
735	  && $(MAKE) $(AM_MAKEFLAGS) install \
736	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
737	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
738	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
739	        distuninstallcheck \
740	  && chmod -R a-w "$$dc_install_base" \
741	  && ({ \
742	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
743	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
744	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
745	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
746	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
747	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
748	  && rm -rf "$$dc_destdir" \
749	  && $(MAKE) $(AM_MAKEFLAGS) dist \
750	  && rm -rf $(DIST_ARCHIVES) \
751	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
752	  && cd "$$am__cwd" \
753	  || exit 1
754	$(am__remove_distdir)
755	@(echo "$(distdir) archives ready for distribution: "; \
756	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
757	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
758distuninstallcheck:
759	@$(am__cd) '$(distuninstallcheck_dir)' \
760	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
761	   || { echo "ERROR: files left after uninstall:" ; \
762	        if test -n "$(DESTDIR)"; then \
763	          echo "  (check DESTDIR support)"; \
764	        fi ; \
765	        $(distuninstallcheck_listfiles) ; \
766	        exit 1; } >&2
767distcleancheck: distclean
768	@if test '$(srcdir)' = . ; then \
769	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
770	  exit 1 ; \
771	fi
772	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
773	  || { echo "ERROR: files left in build directory after distclean:" ; \
774	       $(distcleancheck_listfiles) ; \
775	       exit 1; } >&2
776check-am: all-am
777check: check-recursive
778all-am: Makefile $(DATA) $(HEADERS) config.h
779installdirs: installdirs-recursive
780installdirs-am:
781	for dir in "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(libXfontincludedir)" "$(DESTDIR)$(libXfontincludedir)"; do \
782	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
783	done
784install: install-recursive
785install-exec: install-exec-recursive
786install-data: install-data-recursive
787uninstall: uninstall-recursive
788
789install-am: all-am
790	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
791
792installcheck: installcheck-recursive
793install-strip:
794	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
795	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
796	  `test -z '$(STRIP)' || \
797	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
798mostlyclean-generic:
799
800clean-generic:
801	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
802
803distclean-generic:
804	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
805	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
806
807maintainer-clean-generic:
808	@echo "This command is intended for maintainers to use"
809	@echo "it deletes files that may require special tools to rebuild."
810clean: clean-recursive
811
812clean-am: clean-generic clean-libtool mostlyclean-am
813
814distclean: distclean-recursive
815	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
816	-rm -f Makefile
817distclean-am: clean-am distclean-generic distclean-hdr \
818	distclean-libtool distclean-tags
819
820dvi: dvi-recursive
821
822dvi-am:
823
824html: html-recursive
825
826html-am:
827
828info: info-recursive
829
830info-am:
831
832install-data-am: install-libXfontincludeHEADERS \
833	install-nodist_libXfontincludeHEADERS install-pkgconfigDATA
834
835install-dvi: install-dvi-recursive
836
837install-dvi-am:
838
839install-exec-am:
840
841install-html: install-html-recursive
842
843install-html-am:
844
845install-info: install-info-recursive
846
847install-info-am:
848
849install-man:
850
851install-pdf: install-pdf-recursive
852
853install-pdf-am:
854
855install-ps: install-ps-recursive
856
857install-ps-am:
858
859installcheck-am:
860
861maintainer-clean: maintainer-clean-recursive
862	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
863	-rm -rf $(top_srcdir)/autom4te.cache
864	-rm -f Makefile
865maintainer-clean-am: distclean-am maintainer-clean-generic
866
867mostlyclean: mostlyclean-recursive
868
869mostlyclean-am: mostlyclean-generic mostlyclean-libtool
870
871pdf: pdf-recursive
872
873pdf-am:
874
875ps: ps-recursive
876
877ps-am:
878
879uninstall-am: uninstall-libXfontincludeHEADERS \
880	uninstall-nodist_libXfontincludeHEADERS \
881	uninstall-pkgconfigDATA
882
883.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
884	ctags-recursive install-am install-strip tags-recursive
885
886.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
887	all all-am am--refresh check check-am clean clean-generic \
888	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
889	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
890	dist-zip distcheck distclean distclean-generic distclean-hdr \
891	distclean-libtool distclean-tags distcleancheck distdir \
892	distuninstallcheck dvi dvi-am html html-am info info-am \
893	install install-am install-data install-data-am install-dvi \
894	install-dvi-am install-exec install-exec-am install-html \
895	install-html-am install-info install-info-am \
896	install-libXfontincludeHEADERS install-man \
897	install-nodist_libXfontincludeHEADERS install-pdf \
898	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
899	install-strip installcheck installcheck-am installdirs \
900	installdirs-am maintainer-clean maintainer-clean-generic \
901	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
902	ps ps-am tags tags-recursive uninstall uninstall-am \
903	uninstall-libXfontincludeHEADERS \
904	uninstall-nodist_libXfontincludeHEADERS \
905	uninstall-pkgconfigDATA
906
907
908.PHONY: ChangeLog
909
910ChangeLog:
911	$(CHANGELOG_CMD)
912
913dist-hook: ChangeLog
914
915@HAVE_XMLTO_TRUE@@MAKE_DEVEL_DOCS_TRUE@doc/fontlib.txt: $(srcdir)/doc/fontlib.xml $(srcdir)/doc/fontlib.xsl
916@HAVE_XMLTO_TRUE@@MAKE_DEVEL_DOCS_TRUE@	$(AM_V_GEN)$(XMLTO) -m $(srcdir)/doc/fontlib.xsl -o doc txt $(srcdir)/doc/fontlib.xml
917
918@HAVE_XMLTO_TRUE@@MAKE_DEVEL_DOCS_TRUE@doc/fontlib.html: $(srcdir)/doc/fontlib.xml $(srcdir)/doc/fontlib.xsl
919@HAVE_XMLTO_TRUE@@MAKE_DEVEL_DOCS_TRUE@	$(AM_V_GEN)$(XMLTO) -m $(srcdir)/doc/fontlib.xsl -o doc xhtml-nochunks $(srcdir)/doc/fontlib.xml
920
921@HAVE_XMLTO_TRUE@@MAKE_DEVEL_DOCS_TRUE@doc/fontlib.pdf: $(srcdir)/doc/fontlib.xml $(srcdir)/doc/fontlib.xsl
922@HAVE_XMLTO_TRUE@@MAKE_DEVEL_DOCS_TRUE@	$(AM_V_GEN)$(XMLTO) -m $(srcdir)/doc/fontlib.xsl -o doc pdf $(srcdir)/doc/fontlib.xml
923
924@HAVE_XMLTO_TRUE@@MAKE_DEVEL_DOCS_TRUE@doc/fontlib.ps: $(srcdir)/doc/fontlib.xml $(srcdir)/doc/fontlib.xsl
925@HAVE_XMLTO_TRUE@@MAKE_DEVEL_DOCS_TRUE@	$(AM_V_GEN)$(XMLTO) -m $(srcdir)/doc/fontlib.xsl -o doc ps $(srcdir)/doc/fontlib.xml
926
927# Tell versions [3.59,3.63) of GNU make to not export all variables.
928# Otherwise a system limit (for SysV at least) may be exceeded.
929.NOEXPORT:
930