Makefile.in revision de3c0529
1# Makefile.in generated by automake 1.16.1 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2018 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# 18# Copyright © 2003 Keith Packard, Noah Levitt 19# 20# Permission to use, copy, modify, distribute, and sell this software and its 21# documentation for any purpose is hereby granted without fee, provided that 22# the above copyright notice appear in all copies and that both that 23# copyright notice and this permission notice appear in supporting 24# documentation, and that the name of Keith Packard not be used in 25# advertising or publicity pertaining to distribution of the software without 26# specific, written prior permission. Keith Packard makes no 27# representations about the suitability of this software for any purpose. It 28# is provided "as is" without express or implied warranty. 29# 30# KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 31# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 32# EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR 33# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 34# DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 35# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR 36# PERFORMANCE OF THIS SOFTWARE. 37 38VPATH = @srcdir@ 39am__is_gnu_make = { \ 40 if test -z '$(MAKELEVEL)'; then \ 41 false; \ 42 elif test -n '$(MAKE_HOST)'; then \ 43 true; \ 44 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 45 true; \ 46 else \ 47 false; \ 48 fi; \ 49} 50am__make_running_with_option = \ 51 case $${target_option-} in \ 52 ?) ;; \ 53 *) echo "am__make_running_with_option: internal error: invalid" \ 54 "target option '$${target_option-}' specified" >&2; \ 55 exit 1;; \ 56 esac; \ 57 has_opt=no; \ 58 sane_makeflags=$$MAKEFLAGS; \ 59 if $(am__is_gnu_make); then \ 60 sane_makeflags=$$MFLAGS; \ 61 else \ 62 case $$MAKEFLAGS in \ 63 *\\[\ \ ]*) \ 64 bs=\\; \ 65 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 66 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 67 esac; \ 68 fi; \ 69 skip_next=no; \ 70 strip_trailopt () \ 71 { \ 72 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 73 }; \ 74 for flg in $$sane_makeflags; do \ 75 test $$skip_next = yes && { skip_next=no; continue; }; \ 76 case $$flg in \ 77 *=*|--*) continue;; \ 78 -*I) strip_trailopt 'I'; skip_next=yes;; \ 79 -*I?*) strip_trailopt 'I';; \ 80 -*O) strip_trailopt 'O'; skip_next=yes;; \ 81 -*O?*) strip_trailopt 'O';; \ 82 -*l) strip_trailopt 'l'; skip_next=yes;; \ 83 -*l?*) strip_trailopt 'l';; \ 84 -[dEDm]) skip_next=yes;; \ 85 -[JT]) skip_next=yes;; \ 86 esac; \ 87 case $$flg in \ 88 *$$target_option*) has_opt=yes; break;; \ 89 esac; \ 90 done; \ 91 test $$has_opt = yes 92am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 93am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 94pkgdatadir = $(datadir)/@PACKAGE@ 95pkgincludedir = $(includedir)/@PACKAGE@ 96pkglibdir = $(libdir)/@PACKAGE@ 97pkglibexecdir = $(libexecdir)/@PACKAGE@ 98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 99install_sh_DATA = $(install_sh) -c -m 644 100install_sh_PROGRAM = $(install_sh) -c 101install_sh_SCRIPT = $(install_sh) -c 102INSTALL_HEADER = $(INSTALL_DATA) 103transform = $(program_transform_name) 104NORMAL_INSTALL = : 105PRE_INSTALL = : 106POST_INSTALL = : 107NORMAL_UNINSTALL = : 108PRE_UNINSTALL = : 109POST_UNINSTALL = : 110build_triplet = @build@ 111host_triplet = @host@ 112subdir = . 113ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 114am__aclocal_m4_deps = $(top_srcdir)/configure.ac 115am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 116 $(ACLOCAL_M4) 117DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 118 $(am__configure_deps) $(am__DIST_COMMON) 119am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 120 configure.lineno config.status.lineno 121mkinstalldirs = $(install_sh) -d 122CONFIG_HEADER = config.h $(top_builddir)/include/X11/Xft/Xft.h 123CONFIG_CLEAN_FILES = xft.pc 124CONFIG_CLEAN_VPATH_FILES = 125AM_V_P = $(am__v_P_@AM_V@) 126am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 127am__v_P_0 = false 128am__v_P_1 = : 129AM_V_GEN = $(am__v_GEN_@AM_V@) 130am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 131am__v_GEN_0 = @echo " GEN " $@; 132am__v_GEN_1 = 133AM_V_at = $(am__v_at_@AM_V@) 134am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 135am__v_at_0 = @ 136am__v_at_1 = 137SOURCES = 138DIST_SOURCES = 139RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 140 ctags-recursive dvi-recursive html-recursive info-recursive \ 141 install-data-recursive install-dvi-recursive \ 142 install-exec-recursive install-html-recursive \ 143 install-info-recursive install-pdf-recursive \ 144 install-ps-recursive install-recursive installcheck-recursive \ 145 installdirs-recursive pdf-recursive ps-recursive \ 146 tags-recursive uninstall-recursive 147am__can_run_installinfo = \ 148 case $$AM_UPDATE_INFO_DIR in \ 149 n|no|NO) false;; \ 150 *) (install-info --version) >/dev/null 2>&1;; \ 151 esac 152am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 153am__vpath_adj = case $$p in \ 154 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 155 *) f=$$p;; \ 156 esac; 157am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 158am__install_max = 40 159am__nobase_strip_setup = \ 160 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 161am__nobase_strip = \ 162 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 163am__nobase_list = $(am__nobase_strip_setup); \ 164 for p in $$list; do echo "$$p $$p"; done | \ 165 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 166 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 167 if (++n[$$2] == $(am__install_max)) \ 168 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 169 END { for (dir in files) print dir, files[dir] }' 170am__base_list = \ 171 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 172 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 173am__uninstall_files_from_dir = { \ 174 test -z "$$files" \ 175 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ 176 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ 177 $(am__cd) "$$dir" && rm -f $$files; }; \ 178 } 179am__installdirs = "$(DESTDIR)$(pkgconfigdir)" 180DATA = $(pkgconfig_DATA) 181RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 182 distclean-recursive maintainer-clean-recursive 183am__recursive_targets = \ 184 $(RECURSIVE_TARGETS) \ 185 $(RECURSIVE_CLEAN_TARGETS) \ 186 $(am__extra_recursive_targets) 187AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 188 cscope distdir distdir-am dist dist-all distcheck 189am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ 190 $(LISP)config.h.in 191# Read a list of newline-separated strings from the standard input, 192# and print each of them once, without duplicates. Input order is 193# *not* preserved. 194am__uniquify_input = $(AWK) '\ 195 BEGIN { nonempty = 0; } \ 196 { items[$$0] = 1; nonempty = 1; } \ 197 END { if (nonempty) { for (i in items) print i; }; } \ 198' 199# Make sure the list of sources is unique. This is necessary because, 200# e.g., the same source file might be shared among _SOURCES variables 201# for different programs/libraries. 202am__define_uniq_tagged_files = \ 203 list='$(am__tagged_files)'; \ 204 unique=`for i in $$list; do \ 205 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 206 done | $(am__uniquify_input)` 207ETAGS = etags 208CTAGS = ctags 209CSCOPE = cscope 210DIST_SUBDIRS = $(SUBDIRS) 211am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ 212 $(srcdir)/xft.pc.in $(top_srcdir)/include/X11/Xft/Xft.h.in \ 213 AUTHORS COPYING ChangeLog INSTALL NEWS compile config.guess \ 214 config.sub install-sh ltmain.sh missing 215DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 216distdir = $(PACKAGE)-$(VERSION) 217top_distdir = $(distdir) 218am__remove_distdir = \ 219 if test -d "$(distdir)"; then \ 220 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 221 && rm -rf "$(distdir)" \ 222 || { sleep 5 && rm -rf "$(distdir)"; }; \ 223 else :; fi 224am__post_remove_distdir = $(am__remove_distdir) 225am__relativize = \ 226 dir0=`pwd`; \ 227 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 228 sed_rest='s,^[^/]*/*,,'; \ 229 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 230 sed_butlast='s,/*[^/]*$$,,'; \ 231 while test -n "$$dir1"; do \ 232 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 233 if test "$$first" != "."; then \ 234 if test "$$first" = ".."; then \ 235 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 236 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 237 else \ 238 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 239 if test "$$first2" = "$$first"; then \ 240 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 241 else \ 242 dir2="../$$dir2"; \ 243 fi; \ 244 dir0="$$dir0"/"$$first"; \ 245 fi; \ 246 fi; \ 247 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 248 done; \ 249 reldir="$$dir2" 250DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz 251GZIP_ENV = --best 252DIST_TARGETS = dist-xz dist-gzip 253distuninstallcheck_listfiles = find . -type f -print 254am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 255 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 256distcleancheck_listfiles = find . -type f -print 257ACLOCAL = @ACLOCAL@ 258ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 259ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 260AMTAR = @AMTAR@ 261AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 262APP_MAN_DIR = @APP_MAN_DIR@ 263APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 264AR = @AR@ 265AUTOCONF = @AUTOCONF@ 266AUTOHEADER = @AUTOHEADER@ 267AUTOMAKE = @AUTOMAKE@ 268AWK = @AWK@ 269BASE_CFLAGS = @BASE_CFLAGS@ 270CC = @CC@ 271CCDEPMODE = @CCDEPMODE@ 272CFLAGS = @CFLAGS@ 273CHANGELOG_CMD = @CHANGELOG_CMD@ 274CPP = @CPP@ 275CPPFLAGS = @CPPFLAGS@ 276CWARNFLAGS = @CWARNFLAGS@ 277CYGPATH_W = @CYGPATH_W@ 278DEFS = @DEFS@ 279DEPDIR = @DEPDIR@ 280DLLTOOL = @DLLTOOL@ 281DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 282DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 283DSYMUTIL = @DSYMUTIL@ 284DUMPBIN = @DUMPBIN@ 285ECHO_C = @ECHO_C@ 286ECHO_N = @ECHO_N@ 287ECHO_T = @ECHO_T@ 288EGREP = @EGREP@ 289EXEEXT = @EXEEXT@ 290FGREP = @FGREP@ 291FILE_MAN_DIR = @FILE_MAN_DIR@ 292FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 293FONTCONFIG_CFLAGS = @FONTCONFIG_CFLAGS@ 294FONTCONFIG_LIBS = @FONTCONFIG_LIBS@ 295FREETYPE_CFLAGS = @FREETYPE_CFLAGS@ 296FREETYPE_LIBS = @FREETYPE_LIBS@ 297GREP = @GREP@ 298INSTALL = @INSTALL@ 299INSTALL_CMD = @INSTALL_CMD@ 300INSTALL_DATA = @INSTALL_DATA@ 301INSTALL_PROGRAM = @INSTALL_PROGRAM@ 302INSTALL_SCRIPT = @INSTALL_SCRIPT@ 303INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 304LD = @LD@ 305LDFLAGS = @LDFLAGS@ 306LIBOBJS = @LIBOBJS@ 307LIBS = @LIBS@ 308LIBTOOL = @LIBTOOL@ 309LIB_MAN_DIR = @LIB_MAN_DIR@ 310LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 311LIPO = @LIPO@ 312LN_S = @LN_S@ 313LTLIBOBJS = @LTLIBOBJS@ 314LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 315MAKEINFO = @MAKEINFO@ 316MANIFEST_TOOL = @MANIFEST_TOOL@ 317MAN_SUBSTS = @MAN_SUBSTS@ 318MISC_MAN_DIR = @MISC_MAN_DIR@ 319MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 320MKDIR_P = @MKDIR_P@ 321NM = @NM@ 322NMEDIT = @NMEDIT@ 323OBJDUMP = @OBJDUMP@ 324OBJEXT = @OBJEXT@ 325OTOOL = @OTOOL@ 326OTOOL64 = @OTOOL64@ 327PACKAGE = @PACKAGE@ 328PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 329PACKAGE_NAME = @PACKAGE_NAME@ 330PACKAGE_STRING = @PACKAGE_STRING@ 331PACKAGE_TARNAME = @PACKAGE_TARNAME@ 332PACKAGE_URL = @PACKAGE_URL@ 333PACKAGE_VERSION = @PACKAGE_VERSION@ 334PATH_SEPARATOR = @PATH_SEPARATOR@ 335PKG_CONFIG = @PKG_CONFIG@ 336PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 337PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 338RANLIB = @RANLIB@ 339SED = @SED@ 340SET_MAKE = @SET_MAKE@ 341SHELL = @SHELL@ 342STRICT_CFLAGS = @STRICT_CFLAGS@ 343STRIP = @STRIP@ 344VERSION = @VERSION@ 345XFT_LT_VERSION = @XFT_LT_VERSION@ 346XORG_MAN_PAGE = @XORG_MAN_PAGE@ 347XRENDER_CFLAGS = @XRENDER_CFLAGS@ 348XRENDER_LIBS = @XRENDER_LIBS@ 349abs_builddir = @abs_builddir@ 350abs_srcdir = @abs_srcdir@ 351abs_top_builddir = @abs_top_builddir@ 352abs_top_srcdir = @abs_top_srcdir@ 353ac_ct_AR = @ac_ct_AR@ 354ac_ct_CC = @ac_ct_CC@ 355ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 356am__include = @am__include@ 357am__leading_dot = @am__leading_dot@ 358am__quote = @am__quote@ 359am__tar = @am__tar@ 360am__untar = @am__untar@ 361bindir = @bindir@ 362build = @build@ 363build_alias = @build_alias@ 364build_cpu = @build_cpu@ 365build_os = @build_os@ 366build_vendor = @build_vendor@ 367builddir = @builddir@ 368datadir = @datadir@ 369datarootdir = @datarootdir@ 370docdir = @docdir@ 371dvidir = @dvidir@ 372exec_prefix = @exec_prefix@ 373host = @host@ 374host_alias = @host_alias@ 375host_cpu = @host_cpu@ 376host_os = @host_os@ 377host_vendor = @host_vendor@ 378htmldir = @htmldir@ 379includedir = @includedir@ 380infodir = @infodir@ 381install_sh = @install_sh@ 382libdir = @libdir@ 383libexecdir = @libexecdir@ 384localedir = @localedir@ 385localstatedir = @localstatedir@ 386mandir = @mandir@ 387mkdir_p = @mkdir_p@ 388oldincludedir = @oldincludedir@ 389pdfdir = @pdfdir@ 390prefix = @prefix@ 391program_transform_name = @program_transform_name@ 392psdir = @psdir@ 393runstatedir = @runstatedir@ 394sbindir = @sbindir@ 395sharedstatedir = @sharedstatedir@ 396srcdir = @srcdir@ 397sysconfdir = @sysconfdir@ 398target_alias = @target_alias@ 399top_build_prefix = @top_build_prefix@ 400top_builddir = @top_builddir@ 401top_srcdir = @top_srcdir@ 402SUBDIRS = man src 403pkgconfigdir = $(libdir)/pkgconfig 404pkgconfig_DATA = xft.pc 405MAINTAINERCLEANFILES = ChangeLog INSTALL 406EXTRA_DIST = README.md 407all: config.h 408 $(MAKE) $(AM_MAKEFLAGS) all-recursive 409 410.SUFFIXES: 411am--refresh: Makefile 412 @: 413$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 414 @for dep in $?; do \ 415 case '$(am__configure_deps)' in \ 416 *$$dep*) \ 417 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 418 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 419 && exit 0; \ 420 exit 1;; \ 421 esac; \ 422 done; \ 423 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 424 $(am__cd) $(top_srcdir) && \ 425 $(AUTOMAKE) --foreign Makefile 426Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 427 @case '$?' in \ 428 *config.status*) \ 429 echo ' $(SHELL) ./config.status'; \ 430 $(SHELL) ./config.status;; \ 431 *) \ 432 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ 433 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ 434 esac; 435 436$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 437 $(SHELL) ./config.status --recheck 438 439$(top_srcdir)/configure: $(am__configure_deps) 440 $(am__cd) $(srcdir) && $(AUTOCONF) 441$(ACLOCAL_M4): $(am__aclocal_m4_deps) 442 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 443$(am__aclocal_m4_deps): 444 445config.h: stamp-h1 446 @test -f $@ || rm -f stamp-h1 447 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 448 449stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 450 @rm -f stamp-h1 451 cd $(top_builddir) && $(SHELL) ./config.status config.h 452$(srcdir)/config.h.in: $(am__configure_deps) 453 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 454 rm -f stamp-h1 455 touch $@ 456 457include/X11/Xft/Xft.h: include/X11/Xft/stamp-h2 458 @test -f $@ || rm -f include/X11/Xft/stamp-h2 459 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) include/X11/Xft/stamp-h2 460 461include/X11/Xft/stamp-h2: $(top_srcdir)/include/X11/Xft/Xft.h.in $(top_builddir)/config.status 462 @rm -f include/X11/Xft/stamp-h2 463 cd $(top_builddir) && $(SHELL) ./config.status include/X11/Xft/Xft.h 464 465distclean-hdr: 466 -rm -f config.h stamp-h1 include/X11/Xft/Xft.h include/X11/Xft/stamp-h2 467xft.pc: $(top_builddir)/config.status $(srcdir)/xft.pc.in 468 cd $(top_builddir) && $(SHELL) ./config.status $@ 469 470mostlyclean-libtool: 471 -rm -f *.lo 472 473clean-libtool: 474 -rm -rf .libs _libs 475 476distclean-libtool: 477 -rm -f libtool config.lt 478install-pkgconfigDATA: $(pkgconfig_DATA) 479 @$(NORMAL_INSTALL) 480 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ 481 if test -n "$$list"; then \ 482 echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ 483 $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ 484 fi; \ 485 for p in $$list; do \ 486 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 487 echo "$$d$$p"; \ 488 done | $(am__base_list) | \ 489 while read files; do \ 490 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ 491 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ 492 done 493 494uninstall-pkgconfigDATA: 495 @$(NORMAL_UNINSTALL) 496 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ 497 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 498 dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) 499 500# This directory's subdirectories are mostly independent; you can cd 501# into them and run 'make' without going through this Makefile. 502# To change the values of 'make' variables: instead of editing Makefiles, 503# (1) if the variable is set in 'config.status', edit 'config.status' 504# (which will cause the Makefiles to be regenerated when you run 'make'); 505# (2) otherwise, pass the desired values on the 'make' command line. 506$(am__recursive_targets): 507 @fail=; \ 508 if $(am__make_keepgoing); then \ 509 failcom='fail=yes'; \ 510 else \ 511 failcom='exit 1'; \ 512 fi; \ 513 dot_seen=no; \ 514 target=`echo $@ | sed s/-recursive//`; \ 515 case "$@" in \ 516 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 517 *) list='$(SUBDIRS)' ;; \ 518 esac; \ 519 for subdir in $$list; do \ 520 echo "Making $$target in $$subdir"; \ 521 if test "$$subdir" = "."; then \ 522 dot_seen=yes; \ 523 local_target="$$target-am"; \ 524 else \ 525 local_target="$$target"; \ 526 fi; \ 527 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 528 || eval $$failcom; \ 529 done; \ 530 if test "$$dot_seen" = "no"; then \ 531 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 532 fi; test -z "$$fail" 533 534ID: $(am__tagged_files) 535 $(am__define_uniq_tagged_files); mkid -fID $$unique 536tags: tags-recursive 537TAGS: tags 538 539tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 540 set x; \ 541 here=`pwd`; \ 542 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 543 include_option=--etags-include; \ 544 empty_fix=.; \ 545 else \ 546 include_option=--include; \ 547 empty_fix=; \ 548 fi; \ 549 list='$(SUBDIRS)'; for subdir in $$list; do \ 550 if test "$$subdir" = .; then :; else \ 551 test ! -f $$subdir/TAGS || \ 552 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 553 fi; \ 554 done; \ 555 $(am__define_uniq_tagged_files); \ 556 shift; \ 557 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 558 test -n "$$unique" || unique=$$empty_fix; \ 559 if test $$# -gt 0; then \ 560 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 561 "$$@" $$unique; \ 562 else \ 563 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 564 $$unique; \ 565 fi; \ 566 fi 567ctags: ctags-recursive 568 569CTAGS: ctags 570ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 571 $(am__define_uniq_tagged_files); \ 572 test -z "$(CTAGS_ARGS)$$unique" \ 573 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 574 $$unique 575 576GTAGS: 577 here=`$(am__cd) $(top_builddir) && pwd` \ 578 && $(am__cd) $(top_srcdir) \ 579 && gtags -i $(GTAGS_ARGS) "$$here" 580cscope: cscope.files 581 test ! -s cscope.files \ 582 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 583clean-cscope: 584 -rm -f cscope.files 585cscope.files: clean-cscope cscopelist 586cscopelist: cscopelist-recursive 587 588cscopelist-am: $(am__tagged_files) 589 list='$(am__tagged_files)'; \ 590 case "$(srcdir)" in \ 591 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 592 *) sdir=$(subdir)/$(srcdir) ;; \ 593 esac; \ 594 for i in $$list; do \ 595 if test -f "$$i"; then \ 596 echo "$(subdir)/$$i"; \ 597 else \ 598 echo "$$sdir/$$i"; \ 599 fi; \ 600 done >> $(top_builddir)/cscope.files 601 602distclean-tags: 603 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 604 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 605 606distdir: $(BUILT_SOURCES) 607 $(MAKE) $(AM_MAKEFLAGS) distdir-am 608 609distdir-am: $(DISTFILES) 610 $(am__remove_distdir) 611 test -d "$(distdir)" || mkdir "$(distdir)" 612 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 613 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 614 list='$(DISTFILES)'; \ 615 dist_files=`for file in $$list; do echo $$file; done | \ 616 sed -e "s|^$$srcdirstrip/||;t" \ 617 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 618 case $$dist_files in \ 619 */*) $(MKDIR_P) `echo "$$dist_files" | \ 620 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 621 sort -u` ;; \ 622 esac; \ 623 for file in $$dist_files; do \ 624 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 625 if test -d $$d/$$file; then \ 626 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 627 if test -d "$(distdir)/$$file"; then \ 628 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 629 fi; \ 630 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 631 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 632 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 633 fi; \ 634 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 635 else \ 636 test -f "$(distdir)/$$file" \ 637 || cp -p $$d/$$file "$(distdir)/$$file" \ 638 || exit 1; \ 639 fi; \ 640 done 641 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 642 if test "$$subdir" = .; then :; else \ 643 $(am__make_dryrun) \ 644 || test -d "$(distdir)/$$subdir" \ 645 || $(MKDIR_P) "$(distdir)/$$subdir" \ 646 || exit 1; \ 647 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 648 $(am__relativize); \ 649 new_distdir=$$reldir; \ 650 dir1=$$subdir; dir2="$(top_distdir)"; \ 651 $(am__relativize); \ 652 new_top_distdir=$$reldir; \ 653 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 654 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 655 ($(am__cd) $$subdir && \ 656 $(MAKE) $(AM_MAKEFLAGS) \ 657 top_distdir="$$new_top_distdir" \ 658 distdir="$$new_distdir" \ 659 am__remove_distdir=: \ 660 am__skip_length_check=: \ 661 am__skip_mode_fix=: \ 662 distdir) \ 663 || exit 1; \ 664 fi; \ 665 done 666 $(MAKE) $(AM_MAKEFLAGS) \ 667 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 668 dist-hook 669 -test -n "$(am__skip_mode_fix)" \ 670 || find "$(distdir)" -type d ! -perm -755 \ 671 -exec chmod u+rwx,go+rx {} \; -o \ 672 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 673 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 674 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 675 || chmod -R a+r "$(distdir)" 676dist-gzip: distdir 677 tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz 678 $(am__post_remove_distdir) 679 680dist-bzip2: distdir 681 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 682 $(am__post_remove_distdir) 683 684dist-lzip: distdir 685 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 686 $(am__post_remove_distdir) 687dist-xz: distdir 688 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 689 $(am__post_remove_distdir) 690 691dist-tarZ: distdir 692 @echo WARNING: "Support for distribution archives compressed with" \ 693 "legacy program 'compress' is deprecated." >&2 694 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 695 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 696 $(am__post_remove_distdir) 697 698dist-shar: distdir 699 @echo WARNING: "Support for shar distribution archives is" \ 700 "deprecated." >&2 701 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 702 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz 703 $(am__post_remove_distdir) 704 705dist-zip: distdir 706 -rm -f $(distdir).zip 707 zip -rq $(distdir).zip $(distdir) 708 $(am__post_remove_distdir) 709 710dist dist-all: 711 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 712 $(am__post_remove_distdir) 713 714# This target untars the dist file and tries a VPATH configuration. Then 715# it guarantees that the distribution is self-contained by making another 716# tarfile. 717distcheck: dist 718 case '$(DIST_ARCHIVES)' in \ 719 *.tar.gz*) \ 720 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ 721 *.tar.bz2*) \ 722 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 723 *.tar.lz*) \ 724 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 725 *.tar.xz*) \ 726 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 727 *.tar.Z*) \ 728 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 729 *.shar.gz*) \ 730 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ 731 *.zip*) \ 732 unzip $(distdir).zip ;;\ 733 esac 734 chmod -R a-w $(distdir) 735 chmod u+w $(distdir) 736 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 737 chmod a-w $(distdir) 738 test -d $(distdir)/_build || exit 0; \ 739 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 740 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 741 && am__cwd=`pwd` \ 742 && $(am__cd) $(distdir)/_build/sub \ 743 && ../../configure \ 744 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 745 $(DISTCHECK_CONFIGURE_FLAGS) \ 746 --srcdir=../.. --prefix="$$dc_install_base" \ 747 && $(MAKE) $(AM_MAKEFLAGS) \ 748 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 749 && $(MAKE) $(AM_MAKEFLAGS) check \ 750 && $(MAKE) $(AM_MAKEFLAGS) install \ 751 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 752 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 753 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 754 distuninstallcheck \ 755 && chmod -R a-w "$$dc_install_base" \ 756 && ({ \ 757 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 758 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 759 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 760 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 761 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 762 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 763 && rm -rf "$$dc_destdir" \ 764 && $(MAKE) $(AM_MAKEFLAGS) dist \ 765 && rm -rf $(DIST_ARCHIVES) \ 766 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 767 && cd "$$am__cwd" \ 768 || exit 1 769 $(am__post_remove_distdir) 770 @(echo "$(distdir) archives ready for distribution: "; \ 771 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 772 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 773distuninstallcheck: 774 @test -n '$(distuninstallcheck_dir)' || { \ 775 echo 'ERROR: trying to run $@ with an empty' \ 776 '$$(distuninstallcheck_dir)' >&2; \ 777 exit 1; \ 778 }; \ 779 $(am__cd) '$(distuninstallcheck_dir)' || { \ 780 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 781 exit 1; \ 782 }; \ 783 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 784 || { echo "ERROR: files left after uninstall:" ; \ 785 if test -n "$(DESTDIR)"; then \ 786 echo " (check DESTDIR support)"; \ 787 fi ; \ 788 $(distuninstallcheck_listfiles) ; \ 789 exit 1; } >&2 790distcleancheck: distclean 791 @if test '$(srcdir)' = . ; then \ 792 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 793 exit 1 ; \ 794 fi 795 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 796 || { echo "ERROR: files left in build directory after distclean:" ; \ 797 $(distcleancheck_listfiles) ; \ 798 exit 1; } >&2 799check-am: all-am 800check: check-recursive 801all-am: Makefile $(DATA) config.h 802installdirs: installdirs-recursive 803installdirs-am: 804 for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ 805 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 806 done 807install: install-recursive 808install-exec: install-exec-recursive 809install-data: install-data-recursive 810uninstall: uninstall-recursive 811 812install-am: all-am 813 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 814 815installcheck: installcheck-recursive 816install-strip: 817 if test -z '$(STRIP)'; then \ 818 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 819 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 820 install; \ 821 else \ 822 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 823 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 824 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 825 fi 826mostlyclean-generic: 827 828clean-generic: 829 830distclean-generic: 831 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 832 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 833 834maintainer-clean-generic: 835 @echo "This command is intended for maintainers to use" 836 @echo "it deletes files that may require special tools to rebuild." 837 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 838clean: clean-recursive 839 840clean-am: clean-generic clean-libtool mostlyclean-am 841 842distclean: distclean-recursive 843 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 844 -rm -f Makefile 845distclean-am: clean-am distclean-generic distclean-hdr \ 846 distclean-libtool distclean-tags 847 848dvi: dvi-recursive 849 850dvi-am: 851 852html: html-recursive 853 854html-am: 855 856info: info-recursive 857 858info-am: 859 860install-data-am: install-pkgconfigDATA 861 862install-dvi: install-dvi-recursive 863 864install-dvi-am: 865 866install-exec-am: 867 868install-html: install-html-recursive 869 870install-html-am: 871 872install-info: install-info-recursive 873 874install-info-am: 875 876install-man: 877 878install-pdf: install-pdf-recursive 879 880install-pdf-am: 881 882install-ps: install-ps-recursive 883 884install-ps-am: 885 886installcheck-am: 887 888maintainer-clean: maintainer-clean-recursive 889 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 890 -rm -rf $(top_srcdir)/autom4te.cache 891 -rm -f Makefile 892maintainer-clean-am: distclean-am maintainer-clean-generic 893 894mostlyclean: mostlyclean-recursive 895 896mostlyclean-am: mostlyclean-generic mostlyclean-libtool 897 898pdf: pdf-recursive 899 900pdf-am: 901 902ps: ps-recursive 903 904ps-am: 905 906uninstall-am: uninstall-pkgconfigDATA 907 908.MAKE: $(am__recursive_targets) all install-am install-strip 909 910.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 911 am--refresh check check-am clean clean-cscope clean-generic \ 912 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 913 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ 914 dist-tarZ dist-xz dist-zip distcheck distclean \ 915 distclean-generic distclean-hdr distclean-libtool \ 916 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 917 dvi-am html html-am info info-am install install-am \ 918 install-data install-data-am install-dvi install-dvi-am \ 919 install-exec install-exec-am install-html install-html-am \ 920 install-info install-info-am install-man install-pdf \ 921 install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ 922 install-strip installcheck installcheck-am installdirs \ 923 installdirs-am maintainer-clean maintainer-clean-generic \ 924 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ 925 ps ps-am tags tags-am uninstall uninstall-am \ 926 uninstall-pkgconfigDATA 927 928.PRECIOUS: Makefile 929 930 931.PHONY: ChangeLog INSTALL 932 933INSTALL: 934 $(INSTALL_CMD) 935 936ChangeLog: 937 $(CHANGELOG_CMD) 938 939dist-hook: ChangeLog INSTALL 940 941# Tell versions [3.59,3.63) of GNU make to not export all variables. 942# Otherwise a system limit (for SysV at least) may be exceeded. 943.NOEXPORT: 944