Makefile.in revision 6ad5a0e2
1# Makefile.in generated by automake 1.16.3 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2020 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# 18# Copyright © 2003 Keith Packard, Noah Levitt 19# 20# Permission to use, copy, modify, distribute, and sell this software and its 21# documentation for any purpose is hereby granted without fee, provided that 22# the above copyright notice appear in all copies and that both that 23# copyright notice and this permission notice appear in supporting 24# documentation, and that the name of Keith Packard not be used in 25# advertising or publicity pertaining to distribution of the software without 26# specific, written prior permission. Keith Packard makes no 27# representations about the suitability of this software for any purpose. It 28# is provided "as is" without express or implied warranty. 29# 30# KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 31# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 32# EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR 33# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 34# DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 35# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR 36# PERFORMANCE OF THIS SOFTWARE. 37 38VPATH = @srcdir@ 39am__is_gnu_make = { \ 40 if test -z '$(MAKELEVEL)'; then \ 41 false; \ 42 elif test -n '$(MAKE_HOST)'; then \ 43 true; \ 44 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 45 true; \ 46 else \ 47 false; \ 48 fi; \ 49} 50am__make_running_with_option = \ 51 case $${target_option-} in \ 52 ?) ;; \ 53 *) echo "am__make_running_with_option: internal error: invalid" \ 54 "target option '$${target_option-}' specified" >&2; \ 55 exit 1;; \ 56 esac; \ 57 has_opt=no; \ 58 sane_makeflags=$$MAKEFLAGS; \ 59 if $(am__is_gnu_make); then \ 60 sane_makeflags=$$MFLAGS; \ 61 else \ 62 case $$MAKEFLAGS in \ 63 *\\[\ \ ]*) \ 64 bs=\\; \ 65 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 66 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 67 esac; \ 68 fi; \ 69 skip_next=no; \ 70 strip_trailopt () \ 71 { \ 72 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 73 }; \ 74 for flg in $$sane_makeflags; do \ 75 test $$skip_next = yes && { skip_next=no; continue; }; \ 76 case $$flg in \ 77 *=*|--*) continue;; \ 78 -*I) strip_trailopt 'I'; skip_next=yes;; \ 79 -*I?*) strip_trailopt 'I';; \ 80 -*O) strip_trailopt 'O'; skip_next=yes;; \ 81 -*O?*) strip_trailopt 'O';; \ 82 -*l) strip_trailopt 'l'; skip_next=yes;; \ 83 -*l?*) strip_trailopt 'l';; \ 84 -[dEDm]) skip_next=yes;; \ 85 -[JT]) skip_next=yes;; \ 86 esac; \ 87 case $$flg in \ 88 *$$target_option*) has_opt=yes; break;; \ 89 esac; \ 90 done; \ 91 test $$has_opt = yes 92am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 93am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 94pkgdatadir = $(datadir)/@PACKAGE@ 95pkgincludedir = $(includedir)/@PACKAGE@ 96pkglibdir = $(libdir)/@PACKAGE@ 97pkglibexecdir = $(libexecdir)/@PACKAGE@ 98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 99install_sh_DATA = $(install_sh) -c -m 644 100install_sh_PROGRAM = $(install_sh) -c 101install_sh_SCRIPT = $(install_sh) -c 102INSTALL_HEADER = $(INSTALL_DATA) 103transform = $(program_transform_name) 104NORMAL_INSTALL = : 105PRE_INSTALL = : 106POST_INSTALL = : 107NORMAL_UNINSTALL = : 108PRE_UNINSTALL = : 109POST_UNINSTALL = : 110build_triplet = @build@ 111host_triplet = @host@ 112subdir = . 113ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 114am__aclocal_m4_deps = $(top_srcdir)/configure.ac 115am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 116 $(ACLOCAL_M4) 117DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 118 $(am__configure_deps) $(am__DIST_COMMON) 119am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 120 configure.lineno config.status.lineno 121mkinstalldirs = $(install_sh) -d 122CONFIG_HEADER = config.h 123CONFIG_CLEAN_FILES = xres.pc 124CONFIG_CLEAN_VPATH_FILES = 125AM_V_P = $(am__v_P_@AM_V@) 126am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 127am__v_P_0 = false 128am__v_P_1 = : 129AM_V_GEN = $(am__v_GEN_@AM_V@) 130am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 131am__v_GEN_0 = @echo " GEN " $@; 132am__v_GEN_1 = 133AM_V_at = $(am__v_at_@AM_V@) 134am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 135am__v_at_0 = @ 136am__v_at_1 = 137SOURCES = 138DIST_SOURCES = 139RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 140 ctags-recursive dvi-recursive html-recursive info-recursive \ 141 install-data-recursive install-dvi-recursive \ 142 install-exec-recursive install-html-recursive \ 143 install-info-recursive install-pdf-recursive \ 144 install-ps-recursive install-recursive installcheck-recursive \ 145 installdirs-recursive pdf-recursive ps-recursive \ 146 tags-recursive uninstall-recursive 147am__can_run_installinfo = \ 148 case $$AM_UPDATE_INFO_DIR in \ 149 n|no|NO) false;; \ 150 *) (install-info --version) >/dev/null 2>&1;; \ 151 esac 152am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 153am__vpath_adj = case $$p in \ 154 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 155 *) f=$$p;; \ 156 esac; 157am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 158am__install_max = 40 159am__nobase_strip_setup = \ 160 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 161am__nobase_strip = \ 162 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 163am__nobase_list = $(am__nobase_strip_setup); \ 164 for p in $$list; do echo "$$p $$p"; done | \ 165 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 166 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 167 if (++n[$$2] == $(am__install_max)) \ 168 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 169 END { for (dir in files) print dir, files[dir] }' 170am__base_list = \ 171 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 172 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 173am__uninstall_files_from_dir = { \ 174 test -z "$$files" \ 175 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ 176 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ 177 $(am__cd) "$$dir" && rm -f $$files; }; \ 178 } 179am__installdirs = "$(DESTDIR)$(pkgconfigdir)" 180DATA = $(pkgconfig_DATA) 181RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 182 distclean-recursive maintainer-clean-recursive 183am__recursive_targets = \ 184 $(RECURSIVE_TARGETS) \ 185 $(RECURSIVE_CLEAN_TARGETS) \ 186 $(am__extra_recursive_targets) 187AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 188 cscope distdir distdir-am dist dist-all distcheck 189am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \ 190 config.h.in 191# Read a list of newline-separated strings from the standard input, 192# and print each of them once, without duplicates. Input order is 193# *not* preserved. 194am__uniquify_input = $(AWK) '\ 195 BEGIN { nonempty = 0; } \ 196 { items[$$0] = 1; nonempty = 1; } \ 197 END { if (nonempty) { for (i in items) print i; }; } \ 198' 199# Make sure the list of sources is unique. This is necessary because, 200# e.g., the same source file might be shared among _SOURCES variables 201# for different programs/libraries. 202am__define_uniq_tagged_files = \ 203 list='$(am__tagged_files)'; \ 204 unique=`for i in $$list; do \ 205 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 206 done | $(am__uniquify_input)` 207ETAGS = etags 208CTAGS = ctags 209CSCOPE = cscope 210DIST_SUBDIRS = $(SUBDIRS) 211am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ 212 $(srcdir)/xres.pc.in AUTHORS COPYING ChangeLog INSTALL compile \ 213 config.guess config.sub install-sh ltmain.sh missing 214DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 215distdir = $(PACKAGE)-$(VERSION) 216top_distdir = $(distdir) 217am__remove_distdir = \ 218 if test -d "$(distdir)"; then \ 219 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 220 && rm -rf "$(distdir)" \ 221 || { sleep 5 && rm -rf "$(distdir)"; }; \ 222 else :; fi 223am__post_remove_distdir = $(am__remove_distdir) 224am__relativize = \ 225 dir0=`pwd`; \ 226 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 227 sed_rest='s,^[^/]*/*,,'; \ 228 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 229 sed_butlast='s,/*[^/]*$$,,'; \ 230 while test -n "$$dir1"; do \ 231 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 232 if test "$$first" != "."; then \ 233 if test "$$first" = ".."; then \ 234 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 235 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 236 else \ 237 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 238 if test "$$first2" = "$$first"; then \ 239 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 240 else \ 241 dir2="../$$dir2"; \ 242 fi; \ 243 dir0="$$dir0"/"$$first"; \ 244 fi; \ 245 fi; \ 246 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 247 done; \ 248 reldir="$$dir2" 249DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 250GZIP_ENV = --best 251DIST_TARGETS = dist-bzip2 dist-gzip 252# Exists only to be overridden by the user if desired. 253AM_DISTCHECK_DVI_TARGET = dvi 254distuninstallcheck_listfiles = find . -type f -print 255am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 256 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 257distcleancheck_listfiles = find . -type f -print 258ACLOCAL = @ACLOCAL@ 259ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 260ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 261AMTAR = @AMTAR@ 262AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 263APP_MAN_DIR = @APP_MAN_DIR@ 264APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 265AR = @AR@ 266AUTOCONF = @AUTOCONF@ 267AUTOHEADER = @AUTOHEADER@ 268AUTOMAKE = @AUTOMAKE@ 269AWK = @AWK@ 270BASE_CFLAGS = @BASE_CFLAGS@ 271CC = @CC@ 272CCDEPMODE = @CCDEPMODE@ 273CFLAGS = @CFLAGS@ 274CHANGELOG_CMD = @CHANGELOG_CMD@ 275CPP = @CPP@ 276CPPFLAGS = @CPPFLAGS@ 277CWARNFLAGS = @CWARNFLAGS@ 278CYGPATH_W = @CYGPATH_W@ 279DEFS = @DEFS@ 280DEPDIR = @DEPDIR@ 281DLLTOOL = @DLLTOOL@ 282DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 283DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 284DSYMUTIL = @DSYMUTIL@ 285DUMPBIN = @DUMPBIN@ 286ECHO_C = @ECHO_C@ 287ECHO_N = @ECHO_N@ 288ECHO_T = @ECHO_T@ 289EGREP = @EGREP@ 290EXEEXT = @EXEEXT@ 291FGREP = @FGREP@ 292FILE_MAN_DIR = @FILE_MAN_DIR@ 293FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 294GREP = @GREP@ 295INSTALL = @INSTALL@ 296INSTALL_CMD = @INSTALL_CMD@ 297INSTALL_DATA = @INSTALL_DATA@ 298INSTALL_PROGRAM = @INSTALL_PROGRAM@ 299INSTALL_SCRIPT = @INSTALL_SCRIPT@ 300INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 301LD = @LD@ 302LDFLAGS = @LDFLAGS@ 303LIBOBJS = @LIBOBJS@ 304LIBS = @LIBS@ 305LIBTOOL = @LIBTOOL@ 306LIB_MAN_DIR = @LIB_MAN_DIR@ 307LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 308LIPO = @LIPO@ 309LN_S = @LN_S@ 310LTLIBOBJS = @LTLIBOBJS@ 311LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 312MAKEINFO = @MAKEINFO@ 313MALLOC_ZERO_CFLAGS = @MALLOC_ZERO_CFLAGS@ 314MANIFEST_TOOL = @MANIFEST_TOOL@ 315MAN_SUBSTS = @MAN_SUBSTS@ 316MISC_MAN_DIR = @MISC_MAN_DIR@ 317MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 318MKDIR_P = @MKDIR_P@ 319NM = @NM@ 320NMEDIT = @NMEDIT@ 321OBJDUMP = @OBJDUMP@ 322OBJEXT = @OBJEXT@ 323OTOOL = @OTOOL@ 324OTOOL64 = @OTOOL64@ 325PACKAGE = @PACKAGE@ 326PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 327PACKAGE_NAME = @PACKAGE_NAME@ 328PACKAGE_STRING = @PACKAGE_STRING@ 329PACKAGE_TARNAME = @PACKAGE_TARNAME@ 330PACKAGE_URL = @PACKAGE_URL@ 331PACKAGE_VERSION = @PACKAGE_VERSION@ 332PATH_SEPARATOR = @PATH_SEPARATOR@ 333PKG_CONFIG = @PKG_CONFIG@ 334PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 335PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 336RANLIB = @RANLIB@ 337SED = @SED@ 338SET_MAKE = @SET_MAKE@ 339SHELL = @SHELL@ 340STRICT_CFLAGS = @STRICT_CFLAGS@ 341STRIP = @STRIP@ 342VERSION = @VERSION@ 343XMALLOC_ZERO_CFLAGS = @XMALLOC_ZERO_CFLAGS@ 344XORG_MAN_PAGE = @XORG_MAN_PAGE@ 345XRES_CFLAGS = @XRES_CFLAGS@ 346XRES_LIBS = @XRES_LIBS@ 347XTMALLOC_ZERO_CFLAGS = @XTMALLOC_ZERO_CFLAGS@ 348abs_builddir = @abs_builddir@ 349abs_srcdir = @abs_srcdir@ 350abs_top_builddir = @abs_top_builddir@ 351abs_top_srcdir = @abs_top_srcdir@ 352ac_ct_AR = @ac_ct_AR@ 353ac_ct_CC = @ac_ct_CC@ 354ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 355am__include = @am__include@ 356am__leading_dot = @am__leading_dot@ 357am__quote = @am__quote@ 358am__tar = @am__tar@ 359am__untar = @am__untar@ 360bindir = @bindir@ 361build = @build@ 362build_alias = @build_alias@ 363build_cpu = @build_cpu@ 364build_os = @build_os@ 365build_vendor = @build_vendor@ 366builddir = @builddir@ 367datadir = @datadir@ 368datarootdir = @datarootdir@ 369docdir = @docdir@ 370dvidir = @dvidir@ 371exec_prefix = @exec_prefix@ 372host = @host@ 373host_alias = @host_alias@ 374host_cpu = @host_cpu@ 375host_os = @host_os@ 376host_vendor = @host_vendor@ 377htmldir = @htmldir@ 378includedir = @includedir@ 379infodir = @infodir@ 380install_sh = @install_sh@ 381libdir = @libdir@ 382libexecdir = @libexecdir@ 383localedir = @localedir@ 384localstatedir = @localstatedir@ 385mandir = @mandir@ 386mkdir_p = @mkdir_p@ 387oldincludedir = @oldincludedir@ 388pdfdir = @pdfdir@ 389prefix = @prefix@ 390program_transform_name = @program_transform_name@ 391psdir = @psdir@ 392runstatedir = @runstatedir@ 393sbindir = @sbindir@ 394sharedstatedir = @sharedstatedir@ 395srcdir = @srcdir@ 396sysconfdir = @sysconfdir@ 397target_alias = @target_alias@ 398top_build_prefix = @top_build_prefix@ 399top_builddir = @top_builddir@ 400top_srcdir = @top_srcdir@ 401AUTOMAKE_OPTIONS = foreign 402SUBDIRS = src man 403pkgconfigdir = $(libdir)/pkgconfig 404pkgconfig_DATA = xres.pc 405MAINTAINERCLEANFILES = ChangeLog INSTALL 406EXTRA_DIST = README.md 407all: config.h 408 $(MAKE) $(AM_MAKEFLAGS) all-recursive 409 410.SUFFIXES: 411am--refresh: Makefile 412 @: 413$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 414 @for dep in $?; do \ 415 case '$(am__configure_deps)' in \ 416 *$$dep*) \ 417 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 418 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 419 && exit 0; \ 420 exit 1;; \ 421 esac; \ 422 done; \ 423 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 424 $(am__cd) $(top_srcdir) && \ 425 $(AUTOMAKE) --foreign Makefile 426Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 427 @case '$?' in \ 428 *config.status*) \ 429 echo ' $(SHELL) ./config.status'; \ 430 $(SHELL) ./config.status;; \ 431 *) \ 432 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ 433 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ 434 esac; 435 436$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 437 $(SHELL) ./config.status --recheck 438 439$(top_srcdir)/configure: $(am__configure_deps) 440 $(am__cd) $(srcdir) && $(AUTOCONF) 441$(ACLOCAL_M4): $(am__aclocal_m4_deps) 442 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 443$(am__aclocal_m4_deps): 444 445config.h: stamp-h1 446 @test -f $@ || rm -f stamp-h1 447 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 448 449stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 450 @rm -f stamp-h1 451 cd $(top_builddir) && $(SHELL) ./config.status config.h 452$(srcdir)/config.h.in: $(am__configure_deps) 453 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 454 rm -f stamp-h1 455 touch $@ 456 457distclean-hdr: 458 -rm -f config.h stamp-h1 459xres.pc: $(top_builddir)/config.status $(srcdir)/xres.pc.in 460 cd $(top_builddir) && $(SHELL) ./config.status $@ 461 462mostlyclean-libtool: 463 -rm -f *.lo 464 465clean-libtool: 466 -rm -rf .libs _libs 467 468distclean-libtool: 469 -rm -f libtool config.lt 470install-pkgconfigDATA: $(pkgconfig_DATA) 471 @$(NORMAL_INSTALL) 472 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ 473 if test -n "$$list"; then \ 474 echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ 475 $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ 476 fi; \ 477 for p in $$list; do \ 478 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 479 echo "$$d$$p"; \ 480 done | $(am__base_list) | \ 481 while read files; do \ 482 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ 483 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ 484 done 485 486uninstall-pkgconfigDATA: 487 @$(NORMAL_UNINSTALL) 488 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ 489 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 490 dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) 491 492# This directory's subdirectories are mostly independent; you can cd 493# into them and run 'make' without going through this Makefile. 494# To change the values of 'make' variables: instead of editing Makefiles, 495# (1) if the variable is set in 'config.status', edit 'config.status' 496# (which will cause the Makefiles to be regenerated when you run 'make'); 497# (2) otherwise, pass the desired values on the 'make' command line. 498$(am__recursive_targets): 499 @fail=; \ 500 if $(am__make_keepgoing); then \ 501 failcom='fail=yes'; \ 502 else \ 503 failcom='exit 1'; \ 504 fi; \ 505 dot_seen=no; \ 506 target=`echo $@ | sed s/-recursive//`; \ 507 case "$@" in \ 508 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 509 *) list='$(SUBDIRS)' ;; \ 510 esac; \ 511 for subdir in $$list; do \ 512 echo "Making $$target in $$subdir"; \ 513 if test "$$subdir" = "."; then \ 514 dot_seen=yes; \ 515 local_target="$$target-am"; \ 516 else \ 517 local_target="$$target"; \ 518 fi; \ 519 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 520 || eval $$failcom; \ 521 done; \ 522 if test "$$dot_seen" = "no"; then \ 523 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 524 fi; test -z "$$fail" 525 526ID: $(am__tagged_files) 527 $(am__define_uniq_tagged_files); mkid -fID $$unique 528tags: tags-recursive 529TAGS: tags 530 531tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 532 set x; \ 533 here=`pwd`; \ 534 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 535 include_option=--etags-include; \ 536 empty_fix=.; \ 537 else \ 538 include_option=--include; \ 539 empty_fix=; \ 540 fi; \ 541 list='$(SUBDIRS)'; for subdir in $$list; do \ 542 if test "$$subdir" = .; then :; else \ 543 test ! -f $$subdir/TAGS || \ 544 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 545 fi; \ 546 done; \ 547 $(am__define_uniq_tagged_files); \ 548 shift; \ 549 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 550 test -n "$$unique" || unique=$$empty_fix; \ 551 if test $$# -gt 0; then \ 552 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 553 "$$@" $$unique; \ 554 else \ 555 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 556 $$unique; \ 557 fi; \ 558 fi 559ctags: ctags-recursive 560 561CTAGS: ctags 562ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 563 $(am__define_uniq_tagged_files); \ 564 test -z "$(CTAGS_ARGS)$$unique" \ 565 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 566 $$unique 567 568GTAGS: 569 here=`$(am__cd) $(top_builddir) && pwd` \ 570 && $(am__cd) $(top_srcdir) \ 571 && gtags -i $(GTAGS_ARGS) "$$here" 572cscope: cscope.files 573 test ! -s cscope.files \ 574 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 575clean-cscope: 576 -rm -f cscope.files 577cscope.files: clean-cscope cscopelist 578cscopelist: cscopelist-recursive 579 580cscopelist-am: $(am__tagged_files) 581 list='$(am__tagged_files)'; \ 582 case "$(srcdir)" in \ 583 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 584 *) sdir=$(subdir)/$(srcdir) ;; \ 585 esac; \ 586 for i in $$list; do \ 587 if test -f "$$i"; then \ 588 echo "$(subdir)/$$i"; \ 589 else \ 590 echo "$$sdir/$$i"; \ 591 fi; \ 592 done >> $(top_builddir)/cscope.files 593 594distclean-tags: 595 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 596 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 597 598distdir: $(BUILT_SOURCES) 599 $(MAKE) $(AM_MAKEFLAGS) distdir-am 600 601distdir-am: $(DISTFILES) 602 $(am__remove_distdir) 603 test -d "$(distdir)" || mkdir "$(distdir)" 604 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 605 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 606 list='$(DISTFILES)'; \ 607 dist_files=`for file in $$list; do echo $$file; done | \ 608 sed -e "s|^$$srcdirstrip/||;t" \ 609 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 610 case $$dist_files in \ 611 */*) $(MKDIR_P) `echo "$$dist_files" | \ 612 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 613 sort -u` ;; \ 614 esac; \ 615 for file in $$dist_files; do \ 616 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 617 if test -d $$d/$$file; then \ 618 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 619 if test -d "$(distdir)/$$file"; then \ 620 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 621 fi; \ 622 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 623 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 624 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 625 fi; \ 626 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 627 else \ 628 test -f "$(distdir)/$$file" \ 629 || cp -p $$d/$$file "$(distdir)/$$file" \ 630 || exit 1; \ 631 fi; \ 632 done 633 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 634 if test "$$subdir" = .; then :; else \ 635 $(am__make_dryrun) \ 636 || test -d "$(distdir)/$$subdir" \ 637 || $(MKDIR_P) "$(distdir)/$$subdir" \ 638 || exit 1; \ 639 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 640 $(am__relativize); \ 641 new_distdir=$$reldir; \ 642 dir1=$$subdir; dir2="$(top_distdir)"; \ 643 $(am__relativize); \ 644 new_top_distdir=$$reldir; \ 645 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 646 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 647 ($(am__cd) $$subdir && \ 648 $(MAKE) $(AM_MAKEFLAGS) \ 649 top_distdir="$$new_top_distdir" \ 650 distdir="$$new_distdir" \ 651 am__remove_distdir=: \ 652 am__skip_length_check=: \ 653 am__skip_mode_fix=: \ 654 distdir) \ 655 || exit 1; \ 656 fi; \ 657 done 658 $(MAKE) $(AM_MAKEFLAGS) \ 659 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 660 dist-hook 661 -test -n "$(am__skip_mode_fix)" \ 662 || find "$(distdir)" -type d ! -perm -755 \ 663 -exec chmod u+rwx,go+rx {} \; -o \ 664 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 665 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 666 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 667 || chmod -R a+r "$(distdir)" 668dist-gzip: distdir 669 tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz 670 $(am__post_remove_distdir) 671dist-bzip2: distdir 672 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 673 $(am__post_remove_distdir) 674 675dist-lzip: distdir 676 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 677 $(am__post_remove_distdir) 678 679dist-xz: distdir 680 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 681 $(am__post_remove_distdir) 682 683dist-zstd: distdir 684 tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst 685 $(am__post_remove_distdir) 686 687dist-tarZ: distdir 688 @echo WARNING: "Support for distribution archives compressed with" \ 689 "legacy program 'compress' is deprecated." >&2 690 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 691 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 692 $(am__post_remove_distdir) 693 694dist-shar: distdir 695 @echo WARNING: "Support for shar distribution archives is" \ 696 "deprecated." >&2 697 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 698 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz 699 $(am__post_remove_distdir) 700 701dist-zip: distdir 702 -rm -f $(distdir).zip 703 zip -rq $(distdir).zip $(distdir) 704 $(am__post_remove_distdir) 705 706dist dist-all: 707 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 708 $(am__post_remove_distdir) 709 710# This target untars the dist file and tries a VPATH configuration. Then 711# it guarantees that the distribution is self-contained by making another 712# tarfile. 713distcheck: dist 714 case '$(DIST_ARCHIVES)' in \ 715 *.tar.gz*) \ 716 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ 717 *.tar.bz2*) \ 718 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 719 *.tar.lz*) \ 720 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 721 *.tar.xz*) \ 722 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 723 *.tar.Z*) \ 724 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 725 *.shar.gz*) \ 726 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ 727 *.zip*) \ 728 unzip $(distdir).zip ;;\ 729 *.tar.zst*) \ 730 zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ 731 esac 732 chmod -R a-w $(distdir) 733 chmod u+w $(distdir) 734 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 735 chmod a-w $(distdir) 736 test -d $(distdir)/_build || exit 0; \ 737 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 738 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 739 && am__cwd=`pwd` \ 740 && $(am__cd) $(distdir)/_build/sub \ 741 && ../../configure \ 742 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 743 $(DISTCHECK_CONFIGURE_FLAGS) \ 744 --srcdir=../.. --prefix="$$dc_install_base" \ 745 && $(MAKE) $(AM_MAKEFLAGS) \ 746 && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \ 747 && $(MAKE) $(AM_MAKEFLAGS) check \ 748 && $(MAKE) $(AM_MAKEFLAGS) install \ 749 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 750 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 751 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 752 distuninstallcheck \ 753 && chmod -R a-w "$$dc_install_base" \ 754 && ({ \ 755 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 756 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 757 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 758 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 759 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 760 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 761 && rm -rf "$$dc_destdir" \ 762 && $(MAKE) $(AM_MAKEFLAGS) dist \ 763 && rm -rf $(DIST_ARCHIVES) \ 764 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 765 && cd "$$am__cwd" \ 766 || exit 1 767 $(am__post_remove_distdir) 768 @(echo "$(distdir) archives ready for distribution: "; \ 769 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 770 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 771distuninstallcheck: 772 @test -n '$(distuninstallcheck_dir)' || { \ 773 echo 'ERROR: trying to run $@ with an empty' \ 774 '$$(distuninstallcheck_dir)' >&2; \ 775 exit 1; \ 776 }; \ 777 $(am__cd) '$(distuninstallcheck_dir)' || { \ 778 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 779 exit 1; \ 780 }; \ 781 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 782 || { echo "ERROR: files left after uninstall:" ; \ 783 if test -n "$(DESTDIR)"; then \ 784 echo " (check DESTDIR support)"; \ 785 fi ; \ 786 $(distuninstallcheck_listfiles) ; \ 787 exit 1; } >&2 788distcleancheck: distclean 789 @if test '$(srcdir)' = . ; then \ 790 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 791 exit 1 ; \ 792 fi 793 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 794 || { echo "ERROR: files left in build directory after distclean:" ; \ 795 $(distcleancheck_listfiles) ; \ 796 exit 1; } >&2 797check-am: all-am 798check: check-recursive 799all-am: Makefile $(DATA) config.h 800installdirs: installdirs-recursive 801installdirs-am: 802 for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ 803 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 804 done 805install: install-recursive 806install-exec: install-exec-recursive 807install-data: install-data-recursive 808uninstall: uninstall-recursive 809 810install-am: all-am 811 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 812 813installcheck: installcheck-recursive 814install-strip: 815 if test -z '$(STRIP)'; then \ 816 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 817 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 818 install; \ 819 else \ 820 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 821 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 822 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 823 fi 824mostlyclean-generic: 825 826clean-generic: 827 828distclean-generic: 829 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 830 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 831 832maintainer-clean-generic: 833 @echo "This command is intended for maintainers to use" 834 @echo "it deletes files that may require special tools to rebuild." 835 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 836clean: clean-recursive 837 838clean-am: clean-generic clean-libtool mostlyclean-am 839 840distclean: distclean-recursive 841 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 842 -rm -f Makefile 843distclean-am: clean-am distclean-generic distclean-hdr \ 844 distclean-libtool distclean-tags 845 846dvi: dvi-recursive 847 848dvi-am: 849 850html: html-recursive 851 852html-am: 853 854info: info-recursive 855 856info-am: 857 858install-data-am: install-pkgconfigDATA 859 860install-dvi: install-dvi-recursive 861 862install-dvi-am: 863 864install-exec-am: 865 866install-html: install-html-recursive 867 868install-html-am: 869 870install-info: install-info-recursive 871 872install-info-am: 873 874install-man: 875 876install-pdf: install-pdf-recursive 877 878install-pdf-am: 879 880install-ps: install-ps-recursive 881 882install-ps-am: 883 884installcheck-am: 885 886maintainer-clean: maintainer-clean-recursive 887 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 888 -rm -rf $(top_srcdir)/autom4te.cache 889 -rm -f Makefile 890maintainer-clean-am: distclean-am maintainer-clean-generic 891 892mostlyclean: mostlyclean-recursive 893 894mostlyclean-am: mostlyclean-generic mostlyclean-libtool 895 896pdf: pdf-recursive 897 898pdf-am: 899 900ps: ps-recursive 901 902ps-am: 903 904uninstall-am: uninstall-pkgconfigDATA 905 906.MAKE: $(am__recursive_targets) all install-am install-strip 907 908.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 909 am--refresh check check-am clean clean-cscope clean-generic \ 910 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 911 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ 912 dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \ 913 distclean-generic distclean-hdr distclean-libtool \ 914 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 915 dvi-am html html-am info info-am install install-am \ 916 install-data install-data-am install-dvi install-dvi-am \ 917 install-exec install-exec-am install-html install-html-am \ 918 install-info install-info-am install-man install-pdf \ 919 install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ 920 install-strip installcheck installcheck-am installdirs \ 921 installdirs-am maintainer-clean maintainer-clean-generic \ 922 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ 923 ps ps-am tags tags-am uninstall uninstall-am \ 924 uninstall-pkgconfigDATA 925 926.PRECIOUS: Makefile 927 928 929.PHONY: ChangeLog INSTALL 930 931INSTALL: 932 $(INSTALL_CMD) 933 934ChangeLog: 935 $(CHANGELOG_CMD) 936 937dist-hook: ChangeLog INSTALL 938 939# Tell versions [3.59,3.63) of GNU make to not export all variables. 940# Otherwise a system limit (for SysV at least) may be exceeded. 941.NOEXPORT: 942