Makefile.in revision e6d2e958
1# Makefile.in generated by automake 1.15 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2014 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# 18# Copyright © 2003 Keith Packard, Noah Levitt 19# 20# Permission to use, copy, modify, distribute, and sell this software and its 21# documentation for any purpose is hereby granted without fee, provided that 22# the above copyright notice appear in all copies and that both that 23# copyright notice and this permission notice appear in supporting 24# documentation, and that the name of Keith Packard not be used in 25# advertising or publicity pertaining to distribution of the software without 26# specific, written prior permission. Keith Packard makes no 27# representations about the suitability of this software for any purpose. It 28# is provided "as is" without express or implied warranty. 29# 30# KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 31# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 32# EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR 33# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 34# DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 35# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR 36# PERFORMANCE OF THIS SOFTWARE. 37 38VPATH = @srcdir@ 39am__is_gnu_make = { \ 40 if test -z '$(MAKELEVEL)'; then \ 41 false; \ 42 elif test -n '$(MAKE_HOST)'; then \ 43 true; \ 44 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 45 true; \ 46 else \ 47 false; \ 48 fi; \ 49} 50am__make_running_with_option = \ 51 case $${target_option-} in \ 52 ?) ;; \ 53 *) echo "am__make_running_with_option: internal error: invalid" \ 54 "target option '$${target_option-}' specified" >&2; \ 55 exit 1;; \ 56 esac; \ 57 has_opt=no; \ 58 sane_makeflags=$$MAKEFLAGS; \ 59 if $(am__is_gnu_make); then \ 60 sane_makeflags=$$MFLAGS; \ 61 else \ 62 case $$MAKEFLAGS in \ 63 *\\[\ \ ]*) \ 64 bs=\\; \ 65 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 66 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 67 esac; \ 68 fi; \ 69 skip_next=no; \ 70 strip_trailopt () \ 71 { \ 72 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 73 }; \ 74 for flg in $$sane_makeflags; do \ 75 test $$skip_next = yes && { skip_next=no; continue; }; \ 76 case $$flg in \ 77 *=*|--*) continue;; \ 78 -*I) strip_trailopt 'I'; skip_next=yes;; \ 79 -*I?*) strip_trailopt 'I';; \ 80 -*O) strip_trailopt 'O'; skip_next=yes;; \ 81 -*O?*) strip_trailopt 'O';; \ 82 -*l) strip_trailopt 'l'; skip_next=yes;; \ 83 -*l?*) strip_trailopt 'l';; \ 84 -[dEDm]) skip_next=yes;; \ 85 -[JT]) skip_next=yes;; \ 86 esac; \ 87 case $$flg in \ 88 *$$target_option*) has_opt=yes; break;; \ 89 esac; \ 90 done; \ 91 test $$has_opt = yes 92am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 93am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 94pkgdatadir = $(datadir)/@PACKAGE@ 95pkgincludedir = $(includedir)/@PACKAGE@ 96pkglibdir = $(libdir)/@PACKAGE@ 97pkglibexecdir = $(libexecdir)/@PACKAGE@ 98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 99install_sh_DATA = $(install_sh) -c -m 644 100install_sh_PROGRAM = $(install_sh) -c 101install_sh_SCRIPT = $(install_sh) -c 102INSTALL_HEADER = $(INSTALL_DATA) 103transform = $(program_transform_name) 104NORMAL_INSTALL = : 105PRE_INSTALL = : 106POST_INSTALL = : 107NORMAL_UNINSTALL = : 108PRE_UNINSTALL = : 109POST_UNINSTALL = : 110build_triplet = @build@ 111host_triplet = @host@ 112subdir = . 113ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 114am__aclocal_m4_deps = $(top_srcdir)/configure.ac 115am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 116 $(ACLOCAL_M4) 117DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 118 $(am__configure_deps) $(am__DIST_COMMON) 119am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 120 configure.lineno config.status.lineno 121mkinstalldirs = $(install_sh) -d 122CONFIG_HEADER = config.h 123CONFIG_CLEAN_FILES = xres.pc 124CONFIG_CLEAN_VPATH_FILES = 125AM_V_P = $(am__v_P_@AM_V@) 126am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 127am__v_P_0 = false 128am__v_P_1 = : 129AM_V_GEN = $(am__v_GEN_@AM_V@) 130am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 131am__v_GEN_0 = @echo " GEN " $@; 132am__v_GEN_1 = 133AM_V_at = $(am__v_at_@AM_V@) 134am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 135am__v_at_0 = @ 136am__v_at_1 = 137SOURCES = 138DIST_SOURCES = 139RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 140 ctags-recursive dvi-recursive html-recursive info-recursive \ 141 install-data-recursive install-dvi-recursive \ 142 install-exec-recursive install-html-recursive \ 143 install-info-recursive install-pdf-recursive \ 144 install-ps-recursive install-recursive installcheck-recursive \ 145 installdirs-recursive pdf-recursive ps-recursive \ 146 tags-recursive uninstall-recursive 147am__can_run_installinfo = \ 148 case $$AM_UPDATE_INFO_DIR in \ 149 n|no|NO) false;; \ 150 *) (install-info --version) >/dev/null 2>&1;; \ 151 esac 152am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 153am__vpath_adj = case $$p in \ 154 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 155 *) f=$$p;; \ 156 esac; 157am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 158am__install_max = 40 159am__nobase_strip_setup = \ 160 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 161am__nobase_strip = \ 162 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 163am__nobase_list = $(am__nobase_strip_setup); \ 164 for p in $$list; do echo "$$p $$p"; done | \ 165 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 166 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 167 if (++n[$$2] == $(am__install_max)) \ 168 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 169 END { for (dir in files) print dir, files[dir] }' 170am__base_list = \ 171 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 172 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 173am__uninstall_files_from_dir = { \ 174 test -z "$$files" \ 175 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ 176 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ 177 $(am__cd) "$$dir" && rm -f $$files; }; \ 178 } 179am__installdirs = "$(DESTDIR)$(pkgconfigdir)" 180DATA = $(pkgconfig_DATA) 181RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 182 distclean-recursive maintainer-clean-recursive 183am__recursive_targets = \ 184 $(RECURSIVE_TARGETS) \ 185 $(RECURSIVE_CLEAN_TARGETS) \ 186 $(am__extra_recursive_targets) 187AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 188 cscope distdir dist dist-all distcheck 189am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ 190 $(LISP)config.h.in 191# Read a list of newline-separated strings from the standard input, 192# and print each of them once, without duplicates. Input order is 193# *not* preserved. 194am__uniquify_input = $(AWK) '\ 195 BEGIN { nonempty = 0; } \ 196 { items[$$0] = 1; nonempty = 1; } \ 197 END { if (nonempty) { for (i in items) print i; }; } \ 198' 199# Make sure the list of sources is unique. This is necessary because, 200# e.g., the same source file might be shared among _SOURCES variables 201# for different programs/libraries. 202am__define_uniq_tagged_files = \ 203 list='$(am__tagged_files)'; \ 204 unique=`for i in $$list; do \ 205 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 206 done | $(am__uniquify_input)` 207ETAGS = etags 208CTAGS = ctags 209CSCOPE = cscope 210DIST_SUBDIRS = $(SUBDIRS) 211am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ 212 $(srcdir)/xres.pc.in AUTHORS COPYING ChangeLog INSTALL README \ 213 compile config.guess config.sub install-sh ltmain.sh missing 214DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 215distdir = $(PACKAGE)-$(VERSION) 216top_distdir = $(distdir) 217am__remove_distdir = \ 218 if test -d "$(distdir)"; then \ 219 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 220 && rm -rf "$(distdir)" \ 221 || { sleep 5 && rm -rf "$(distdir)"; }; \ 222 else :; fi 223am__post_remove_distdir = $(am__remove_distdir) 224am__relativize = \ 225 dir0=`pwd`; \ 226 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 227 sed_rest='s,^[^/]*/*,,'; \ 228 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 229 sed_butlast='s,/*[^/]*$$,,'; \ 230 while test -n "$$dir1"; do \ 231 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 232 if test "$$first" != "."; then \ 233 if test "$$first" = ".."; then \ 234 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 235 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 236 else \ 237 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 238 if test "$$first2" = "$$first"; then \ 239 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 240 else \ 241 dir2="../$$dir2"; \ 242 fi; \ 243 dir0="$$dir0"/"$$first"; \ 244 fi; \ 245 fi; \ 246 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 247 done; \ 248 reldir="$$dir2" 249DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 250GZIP_ENV = --best 251DIST_TARGETS = dist-bzip2 dist-gzip 252distuninstallcheck_listfiles = find . -type f -print 253am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 254 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 255distcleancheck_listfiles = find . -type f -print 256ACLOCAL = @ACLOCAL@ 257ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 258ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 259AMTAR = @AMTAR@ 260AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 261APP_MAN_DIR = @APP_MAN_DIR@ 262APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 263AR = @AR@ 264AUTOCONF = @AUTOCONF@ 265AUTOHEADER = @AUTOHEADER@ 266AUTOMAKE = @AUTOMAKE@ 267AWK = @AWK@ 268BASE_CFLAGS = @BASE_CFLAGS@ 269CC = @CC@ 270CCDEPMODE = @CCDEPMODE@ 271CFLAGS = @CFLAGS@ 272CHANGELOG_CMD = @CHANGELOG_CMD@ 273CPP = @CPP@ 274CPPFLAGS = @CPPFLAGS@ 275CWARNFLAGS = @CWARNFLAGS@ 276CYGPATH_W = @CYGPATH_W@ 277DEFS = @DEFS@ 278DEPDIR = @DEPDIR@ 279DLLTOOL = @DLLTOOL@ 280DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 281DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 282DSYMUTIL = @DSYMUTIL@ 283DUMPBIN = @DUMPBIN@ 284ECHO_C = @ECHO_C@ 285ECHO_N = @ECHO_N@ 286ECHO_T = @ECHO_T@ 287EGREP = @EGREP@ 288EXEEXT = @EXEEXT@ 289FGREP = @FGREP@ 290FILE_MAN_DIR = @FILE_MAN_DIR@ 291FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 292GREP = @GREP@ 293INSTALL = @INSTALL@ 294INSTALL_CMD = @INSTALL_CMD@ 295INSTALL_DATA = @INSTALL_DATA@ 296INSTALL_PROGRAM = @INSTALL_PROGRAM@ 297INSTALL_SCRIPT = @INSTALL_SCRIPT@ 298INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 299LD = @LD@ 300LDFLAGS = @LDFLAGS@ 301LIBOBJS = @LIBOBJS@ 302LIBS = @LIBS@ 303LIBTOOL = @LIBTOOL@ 304LIB_MAN_DIR = @LIB_MAN_DIR@ 305LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 306LIPO = @LIPO@ 307LN_S = @LN_S@ 308LTLIBOBJS = @LTLIBOBJS@ 309LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 310MAKEINFO = @MAKEINFO@ 311MALLOC_ZERO_CFLAGS = @MALLOC_ZERO_CFLAGS@ 312MANIFEST_TOOL = @MANIFEST_TOOL@ 313MAN_SUBSTS = @MAN_SUBSTS@ 314MISC_MAN_DIR = @MISC_MAN_DIR@ 315MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 316MKDIR_P = @MKDIR_P@ 317NM = @NM@ 318NMEDIT = @NMEDIT@ 319OBJDUMP = @OBJDUMP@ 320OBJEXT = @OBJEXT@ 321OTOOL = @OTOOL@ 322OTOOL64 = @OTOOL64@ 323PACKAGE = @PACKAGE@ 324PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 325PACKAGE_NAME = @PACKAGE_NAME@ 326PACKAGE_STRING = @PACKAGE_STRING@ 327PACKAGE_TARNAME = @PACKAGE_TARNAME@ 328PACKAGE_URL = @PACKAGE_URL@ 329PACKAGE_VERSION = @PACKAGE_VERSION@ 330PATH_SEPARATOR = @PATH_SEPARATOR@ 331PKG_CONFIG = @PKG_CONFIG@ 332PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 333PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 334RANLIB = @RANLIB@ 335SED = @SED@ 336SET_MAKE = @SET_MAKE@ 337SHELL = @SHELL@ 338STRICT_CFLAGS = @STRICT_CFLAGS@ 339STRIP = @STRIP@ 340VERSION = @VERSION@ 341XMALLOC_ZERO_CFLAGS = @XMALLOC_ZERO_CFLAGS@ 342XORG_MAN_PAGE = @XORG_MAN_PAGE@ 343XRES_CFLAGS = @XRES_CFLAGS@ 344XRES_LIBS = @XRES_LIBS@ 345XTMALLOC_ZERO_CFLAGS = @XTMALLOC_ZERO_CFLAGS@ 346abs_builddir = @abs_builddir@ 347abs_srcdir = @abs_srcdir@ 348abs_top_builddir = @abs_top_builddir@ 349abs_top_srcdir = @abs_top_srcdir@ 350ac_ct_AR = @ac_ct_AR@ 351ac_ct_CC = @ac_ct_CC@ 352ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 353am__include = @am__include@ 354am__leading_dot = @am__leading_dot@ 355am__quote = @am__quote@ 356am__tar = @am__tar@ 357am__untar = @am__untar@ 358bindir = @bindir@ 359build = @build@ 360build_alias = @build_alias@ 361build_cpu = @build_cpu@ 362build_os = @build_os@ 363build_vendor = @build_vendor@ 364builddir = @builddir@ 365datadir = @datadir@ 366datarootdir = @datarootdir@ 367docdir = @docdir@ 368dvidir = @dvidir@ 369exec_prefix = @exec_prefix@ 370host = @host@ 371host_alias = @host_alias@ 372host_cpu = @host_cpu@ 373host_os = @host_os@ 374host_vendor = @host_vendor@ 375htmldir = @htmldir@ 376includedir = @includedir@ 377infodir = @infodir@ 378install_sh = @install_sh@ 379libdir = @libdir@ 380libexecdir = @libexecdir@ 381localedir = @localedir@ 382localstatedir = @localstatedir@ 383mandir = @mandir@ 384mkdir_p = @mkdir_p@ 385oldincludedir = @oldincludedir@ 386pdfdir = @pdfdir@ 387prefix = @prefix@ 388program_transform_name = @program_transform_name@ 389psdir = @psdir@ 390sbindir = @sbindir@ 391sharedstatedir = @sharedstatedir@ 392srcdir = @srcdir@ 393sysconfdir = @sysconfdir@ 394target_alias = @target_alias@ 395top_build_prefix = @top_build_prefix@ 396top_builddir = @top_builddir@ 397top_srcdir = @top_srcdir@ 398AUTOMAKE_OPTIONS = foreign 399SUBDIRS = src man 400pkgconfigdir = $(libdir)/pkgconfig 401pkgconfig_DATA = xres.pc 402MAINTAINERCLEANFILES = ChangeLog INSTALL 403all: config.h 404 $(MAKE) $(AM_MAKEFLAGS) all-recursive 405 406.SUFFIXES: 407am--refresh: Makefile 408 @: 409$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 410 @for dep in $?; do \ 411 case '$(am__configure_deps)' in \ 412 *$$dep*) \ 413 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 414 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 415 && exit 0; \ 416 exit 1;; \ 417 esac; \ 418 done; \ 419 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 420 $(am__cd) $(top_srcdir) && \ 421 $(AUTOMAKE) --foreign Makefile 422Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 423 @case '$?' in \ 424 *config.status*) \ 425 echo ' $(SHELL) ./config.status'; \ 426 $(SHELL) ./config.status;; \ 427 *) \ 428 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 429 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 430 esac; 431 432$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 433 $(SHELL) ./config.status --recheck 434 435$(top_srcdir)/configure: $(am__configure_deps) 436 $(am__cd) $(srcdir) && $(AUTOCONF) 437$(ACLOCAL_M4): $(am__aclocal_m4_deps) 438 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 439$(am__aclocal_m4_deps): 440 441config.h: stamp-h1 442 @test -f $@ || rm -f stamp-h1 443 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 444 445stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 446 @rm -f stamp-h1 447 cd $(top_builddir) && $(SHELL) ./config.status config.h 448$(srcdir)/config.h.in: $(am__configure_deps) 449 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 450 rm -f stamp-h1 451 touch $@ 452 453distclean-hdr: 454 -rm -f config.h stamp-h1 455xres.pc: $(top_builddir)/config.status $(srcdir)/xres.pc.in 456 cd $(top_builddir) && $(SHELL) ./config.status $@ 457 458mostlyclean-libtool: 459 -rm -f *.lo 460 461clean-libtool: 462 -rm -rf .libs _libs 463 464distclean-libtool: 465 -rm -f libtool config.lt 466install-pkgconfigDATA: $(pkgconfig_DATA) 467 @$(NORMAL_INSTALL) 468 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ 469 if test -n "$$list"; then \ 470 echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ 471 $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ 472 fi; \ 473 for p in $$list; do \ 474 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 475 echo "$$d$$p"; \ 476 done | $(am__base_list) | \ 477 while read files; do \ 478 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ 479 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ 480 done 481 482uninstall-pkgconfigDATA: 483 @$(NORMAL_UNINSTALL) 484 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ 485 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 486 dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) 487 488# This directory's subdirectories are mostly independent; you can cd 489# into them and run 'make' without going through this Makefile. 490# To change the values of 'make' variables: instead of editing Makefiles, 491# (1) if the variable is set in 'config.status', edit 'config.status' 492# (which will cause the Makefiles to be regenerated when you run 'make'); 493# (2) otherwise, pass the desired values on the 'make' command line. 494$(am__recursive_targets): 495 @fail=; \ 496 if $(am__make_keepgoing); then \ 497 failcom='fail=yes'; \ 498 else \ 499 failcom='exit 1'; \ 500 fi; \ 501 dot_seen=no; \ 502 target=`echo $@ | sed s/-recursive//`; \ 503 case "$@" in \ 504 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 505 *) list='$(SUBDIRS)' ;; \ 506 esac; \ 507 for subdir in $$list; do \ 508 echo "Making $$target in $$subdir"; \ 509 if test "$$subdir" = "."; then \ 510 dot_seen=yes; \ 511 local_target="$$target-am"; \ 512 else \ 513 local_target="$$target"; \ 514 fi; \ 515 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 516 || eval $$failcom; \ 517 done; \ 518 if test "$$dot_seen" = "no"; then \ 519 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 520 fi; test -z "$$fail" 521 522ID: $(am__tagged_files) 523 $(am__define_uniq_tagged_files); mkid -fID $$unique 524tags: tags-recursive 525TAGS: tags 526 527tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 528 set x; \ 529 here=`pwd`; \ 530 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 531 include_option=--etags-include; \ 532 empty_fix=.; \ 533 else \ 534 include_option=--include; \ 535 empty_fix=; \ 536 fi; \ 537 list='$(SUBDIRS)'; for subdir in $$list; do \ 538 if test "$$subdir" = .; then :; else \ 539 test ! -f $$subdir/TAGS || \ 540 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 541 fi; \ 542 done; \ 543 $(am__define_uniq_tagged_files); \ 544 shift; \ 545 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 546 test -n "$$unique" || unique=$$empty_fix; \ 547 if test $$# -gt 0; then \ 548 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 549 "$$@" $$unique; \ 550 else \ 551 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 552 $$unique; \ 553 fi; \ 554 fi 555ctags: ctags-recursive 556 557CTAGS: ctags 558ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 559 $(am__define_uniq_tagged_files); \ 560 test -z "$(CTAGS_ARGS)$$unique" \ 561 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 562 $$unique 563 564GTAGS: 565 here=`$(am__cd) $(top_builddir) && pwd` \ 566 && $(am__cd) $(top_srcdir) \ 567 && gtags -i $(GTAGS_ARGS) "$$here" 568cscope: cscope.files 569 test ! -s cscope.files \ 570 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 571clean-cscope: 572 -rm -f cscope.files 573cscope.files: clean-cscope cscopelist 574cscopelist: cscopelist-recursive 575 576cscopelist-am: $(am__tagged_files) 577 list='$(am__tagged_files)'; \ 578 case "$(srcdir)" in \ 579 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 580 *) sdir=$(subdir)/$(srcdir) ;; \ 581 esac; \ 582 for i in $$list; do \ 583 if test -f "$$i"; then \ 584 echo "$(subdir)/$$i"; \ 585 else \ 586 echo "$$sdir/$$i"; \ 587 fi; \ 588 done >> $(top_builddir)/cscope.files 589 590distclean-tags: 591 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 592 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 593 594distdir: $(DISTFILES) 595 $(am__remove_distdir) 596 test -d "$(distdir)" || mkdir "$(distdir)" 597 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 598 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 599 list='$(DISTFILES)'; \ 600 dist_files=`for file in $$list; do echo $$file; done | \ 601 sed -e "s|^$$srcdirstrip/||;t" \ 602 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 603 case $$dist_files in \ 604 */*) $(MKDIR_P) `echo "$$dist_files" | \ 605 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 606 sort -u` ;; \ 607 esac; \ 608 for file in $$dist_files; do \ 609 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 610 if test -d $$d/$$file; then \ 611 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 612 if test -d "$(distdir)/$$file"; then \ 613 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 614 fi; \ 615 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 616 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 617 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 618 fi; \ 619 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 620 else \ 621 test -f "$(distdir)/$$file" \ 622 || cp -p $$d/$$file "$(distdir)/$$file" \ 623 || exit 1; \ 624 fi; \ 625 done 626 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 627 if test "$$subdir" = .; then :; else \ 628 $(am__make_dryrun) \ 629 || test -d "$(distdir)/$$subdir" \ 630 || $(MKDIR_P) "$(distdir)/$$subdir" \ 631 || exit 1; \ 632 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 633 $(am__relativize); \ 634 new_distdir=$$reldir; \ 635 dir1=$$subdir; dir2="$(top_distdir)"; \ 636 $(am__relativize); \ 637 new_top_distdir=$$reldir; \ 638 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 639 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 640 ($(am__cd) $$subdir && \ 641 $(MAKE) $(AM_MAKEFLAGS) \ 642 top_distdir="$$new_top_distdir" \ 643 distdir="$$new_distdir" \ 644 am__remove_distdir=: \ 645 am__skip_length_check=: \ 646 am__skip_mode_fix=: \ 647 distdir) \ 648 || exit 1; \ 649 fi; \ 650 done 651 $(MAKE) $(AM_MAKEFLAGS) \ 652 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 653 dist-hook 654 -test -n "$(am__skip_mode_fix)" \ 655 || find "$(distdir)" -type d ! -perm -755 \ 656 -exec chmod u+rwx,go+rx {} \; -o \ 657 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 658 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 659 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 660 || chmod -R a+r "$(distdir)" 661dist-gzip: distdir 662 tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz 663 $(am__post_remove_distdir) 664dist-bzip2: distdir 665 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 666 $(am__post_remove_distdir) 667 668dist-lzip: distdir 669 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 670 $(am__post_remove_distdir) 671 672dist-xz: distdir 673 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 674 $(am__post_remove_distdir) 675 676dist-tarZ: distdir 677 @echo WARNING: "Support for distribution archives compressed with" \ 678 "legacy program 'compress' is deprecated." >&2 679 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 680 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 681 $(am__post_remove_distdir) 682 683dist-shar: distdir 684 @echo WARNING: "Support for shar distribution archives is" \ 685 "deprecated." >&2 686 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 687 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz 688 $(am__post_remove_distdir) 689 690dist-zip: distdir 691 -rm -f $(distdir).zip 692 zip -rq $(distdir).zip $(distdir) 693 $(am__post_remove_distdir) 694 695dist dist-all: 696 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 697 $(am__post_remove_distdir) 698 699# This target untars the dist file and tries a VPATH configuration. Then 700# it guarantees that the distribution is self-contained by making another 701# tarfile. 702distcheck: dist 703 case '$(DIST_ARCHIVES)' in \ 704 *.tar.gz*) \ 705 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ 706 *.tar.bz2*) \ 707 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 708 *.tar.lz*) \ 709 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 710 *.tar.xz*) \ 711 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 712 *.tar.Z*) \ 713 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 714 *.shar.gz*) \ 715 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ 716 *.zip*) \ 717 unzip $(distdir).zip ;;\ 718 esac 719 chmod -R a-w $(distdir) 720 chmod u+w $(distdir) 721 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 722 chmod a-w $(distdir) 723 test -d $(distdir)/_build || exit 0; \ 724 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 725 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 726 && am__cwd=`pwd` \ 727 && $(am__cd) $(distdir)/_build/sub \ 728 && ../../configure \ 729 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 730 $(DISTCHECK_CONFIGURE_FLAGS) \ 731 --srcdir=../.. --prefix="$$dc_install_base" \ 732 && $(MAKE) $(AM_MAKEFLAGS) \ 733 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 734 && $(MAKE) $(AM_MAKEFLAGS) check \ 735 && $(MAKE) $(AM_MAKEFLAGS) install \ 736 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 737 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 738 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 739 distuninstallcheck \ 740 && chmod -R a-w "$$dc_install_base" \ 741 && ({ \ 742 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 743 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 744 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 745 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 746 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 747 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 748 && rm -rf "$$dc_destdir" \ 749 && $(MAKE) $(AM_MAKEFLAGS) dist \ 750 && rm -rf $(DIST_ARCHIVES) \ 751 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 752 && cd "$$am__cwd" \ 753 || exit 1 754 $(am__post_remove_distdir) 755 @(echo "$(distdir) archives ready for distribution: "; \ 756 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 757 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 758distuninstallcheck: 759 @test -n '$(distuninstallcheck_dir)' || { \ 760 echo 'ERROR: trying to run $@ with an empty' \ 761 '$$(distuninstallcheck_dir)' >&2; \ 762 exit 1; \ 763 }; \ 764 $(am__cd) '$(distuninstallcheck_dir)' || { \ 765 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 766 exit 1; \ 767 }; \ 768 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 769 || { echo "ERROR: files left after uninstall:" ; \ 770 if test -n "$(DESTDIR)"; then \ 771 echo " (check DESTDIR support)"; \ 772 fi ; \ 773 $(distuninstallcheck_listfiles) ; \ 774 exit 1; } >&2 775distcleancheck: distclean 776 @if test '$(srcdir)' = . ; then \ 777 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 778 exit 1 ; \ 779 fi 780 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 781 || { echo "ERROR: files left in build directory after distclean:" ; \ 782 $(distcleancheck_listfiles) ; \ 783 exit 1; } >&2 784check-am: all-am 785check: check-recursive 786all-am: Makefile $(DATA) config.h 787installdirs: installdirs-recursive 788installdirs-am: 789 for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ 790 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 791 done 792install: install-recursive 793install-exec: install-exec-recursive 794install-data: install-data-recursive 795uninstall: uninstall-recursive 796 797install-am: all-am 798 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 799 800installcheck: installcheck-recursive 801install-strip: 802 if test -z '$(STRIP)'; then \ 803 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 804 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 805 install; \ 806 else \ 807 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 808 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 809 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 810 fi 811mostlyclean-generic: 812 813clean-generic: 814 815distclean-generic: 816 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 817 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 818 819maintainer-clean-generic: 820 @echo "This command is intended for maintainers to use" 821 @echo "it deletes files that may require special tools to rebuild." 822 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 823clean: clean-recursive 824 825clean-am: clean-generic clean-libtool mostlyclean-am 826 827distclean: distclean-recursive 828 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 829 -rm -f Makefile 830distclean-am: clean-am distclean-generic distclean-hdr \ 831 distclean-libtool distclean-tags 832 833dvi: dvi-recursive 834 835dvi-am: 836 837html: html-recursive 838 839html-am: 840 841info: info-recursive 842 843info-am: 844 845install-data-am: install-pkgconfigDATA 846 847install-dvi: install-dvi-recursive 848 849install-dvi-am: 850 851install-exec-am: 852 853install-html: install-html-recursive 854 855install-html-am: 856 857install-info: install-info-recursive 858 859install-info-am: 860 861install-man: 862 863install-pdf: install-pdf-recursive 864 865install-pdf-am: 866 867install-ps: install-ps-recursive 868 869install-ps-am: 870 871installcheck-am: 872 873maintainer-clean: maintainer-clean-recursive 874 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 875 -rm -rf $(top_srcdir)/autom4te.cache 876 -rm -f Makefile 877maintainer-clean-am: distclean-am maintainer-clean-generic 878 879mostlyclean: mostlyclean-recursive 880 881mostlyclean-am: mostlyclean-generic mostlyclean-libtool 882 883pdf: pdf-recursive 884 885pdf-am: 886 887ps: ps-recursive 888 889ps-am: 890 891uninstall-am: uninstall-pkgconfigDATA 892 893.MAKE: $(am__recursive_targets) all install-am install-strip 894 895.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 896 am--refresh check check-am clean clean-cscope clean-generic \ 897 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 898 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ 899 dist-tarZ dist-xz dist-zip distcheck distclean \ 900 distclean-generic distclean-hdr distclean-libtool \ 901 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 902 dvi-am html html-am info info-am install install-am \ 903 install-data install-data-am install-dvi install-dvi-am \ 904 install-exec install-exec-am install-html install-html-am \ 905 install-info install-info-am install-man install-pdf \ 906 install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ 907 install-strip installcheck installcheck-am installdirs \ 908 installdirs-am maintainer-clean maintainer-clean-generic \ 909 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ 910 ps ps-am tags tags-am uninstall uninstall-am \ 911 uninstall-pkgconfigDATA 912 913.PRECIOUS: Makefile 914 915 916.PHONY: ChangeLog INSTALL 917 918INSTALL: 919 $(INSTALL_CMD) 920 921ChangeLog: 922 $(CHANGELOG_CMD) 923 924dist-hook: ChangeLog INSTALL 925 926# Tell versions [3.59,3.63) of GNU make to not export all variables. 927# Otherwise a system limit (for SysV at least) may be exceeded. 928.NOEXPORT: 929