Makefile.in revision e1c0d025 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17#
18#  Copyright 2005  Red Hat, Inc.
19#
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Red Hat not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Red Hat makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29#
30#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38VPATH = @srcdir@
39am__is_gnu_make = { \
40  if test -z '$(MAKELEVEL)'; then \
41    false; \
42  elif test -n '$(MAKE_HOST)'; then \
43    true; \
44  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
45    true; \
46  else \
47    false; \
48  fi; \
49}
50am__make_running_with_option = \
51  case $${target_option-} in \
52      ?) ;; \
53      *) echo "am__make_running_with_option: internal error: invalid" \
54              "target option '$${target_option-}' specified" >&2; \
55         exit 1;; \
56  esac; \
57  has_opt=no; \
58  sane_makeflags=$$MAKEFLAGS; \
59  if $(am__is_gnu_make); then \
60    sane_makeflags=$$MFLAGS; \
61  else \
62    case $$MAKEFLAGS in \
63      *\\[\ \	]*) \
64        bs=\\; \
65        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
66          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
67    esac; \
68  fi; \
69  skip_next=no; \
70  strip_trailopt () \
71  { \
72    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
73  }; \
74  for flg in $$sane_makeflags; do \
75    test $$skip_next = yes && { skip_next=no; continue; }; \
76    case $$flg in \
77      *=*|--*) continue;; \
78        -*I) strip_trailopt 'I'; skip_next=yes;; \
79      -*I?*) strip_trailopt 'I';; \
80        -*O) strip_trailopt 'O'; skip_next=yes;; \
81      -*O?*) strip_trailopt 'O';; \
82        -*l) strip_trailopt 'l'; skip_next=yes;; \
83      -*l?*) strip_trailopt 'l';; \
84      -[dEDm]) skip_next=yes;; \
85      -[JT]) skip_next=yes;; \
86    esac; \
87    case $$flg in \
88      *$$target_option*) has_opt=yes; break;; \
89    esac; \
90  done; \
91  test $$has_opt = yes
92am__make_dryrun = (target_option=n; $(am__make_running_with_option))
93am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
94pkgdatadir = $(datadir)/@PACKAGE@
95pkgincludedir = $(includedir)/@PACKAGE@
96pkglibdir = $(libdir)/@PACKAGE@
97pkglibexecdir = $(libexecdir)/@PACKAGE@
98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
99install_sh_DATA = $(install_sh) -c -m 644
100install_sh_PROGRAM = $(install_sh) -c
101install_sh_SCRIPT = $(install_sh) -c
102INSTALL_HEADER = $(INSTALL_DATA)
103transform = $(program_transform_name)
104NORMAL_INSTALL = :
105PRE_INSTALL = :
106POST_INSTALL = :
107NORMAL_UNINSTALL = :
108PRE_UNINSTALL = :
109POST_UNINSTALL = :
110build_triplet = @build@
111host_triplet = @host@
112subdir = .
113ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
114am__aclocal_m4_deps = $(top_srcdir)/configure.ac
115am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
116	$(ACLOCAL_M4)
117DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
118	$(am__configure_deps) $(am__DIST_COMMON)
119am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
120 configure.lineno config.status.lineno
121mkinstalldirs = $(install_sh) -d
122CONFIG_HEADER = config.h
123CONFIG_CLEAN_FILES = fontenc.pc
124CONFIG_CLEAN_VPATH_FILES =
125AM_V_P = $(am__v_P_@AM_V@)
126am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
127am__v_P_0 = false
128am__v_P_1 = :
129AM_V_GEN = $(am__v_GEN_@AM_V@)
130am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
131am__v_GEN_0 = @echo "  GEN     " $@;
132am__v_GEN_1 = 
133AM_V_at = $(am__v_at_@AM_V@)
134am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
135am__v_at_0 = @
136am__v_at_1 = 
137SOURCES =
138DIST_SOURCES =
139RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
140	ctags-recursive dvi-recursive html-recursive info-recursive \
141	install-data-recursive install-dvi-recursive \
142	install-exec-recursive install-html-recursive \
143	install-info-recursive install-pdf-recursive \
144	install-ps-recursive install-recursive installcheck-recursive \
145	installdirs-recursive pdf-recursive ps-recursive \
146	tags-recursive uninstall-recursive
147am__can_run_installinfo = \
148  case $$AM_UPDATE_INFO_DIR in \
149    n|no|NO) false;; \
150    *) (install-info --version) >/dev/null 2>&1;; \
151  esac
152am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
153am__vpath_adj = case $$p in \
154    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
155    *) f=$$p;; \
156  esac;
157am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
158am__install_max = 40
159am__nobase_strip_setup = \
160  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
161am__nobase_strip = \
162  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
163am__nobase_list = $(am__nobase_strip_setup); \
164  for p in $$list; do echo "$$p $$p"; done | \
165  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
166  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
167    if (++n[$$2] == $(am__install_max)) \
168      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
169    END { for (dir in files) print dir, files[dir] }'
170am__base_list = \
171  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
172  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
173am__uninstall_files_from_dir = { \
174  test -z "$$files" \
175    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
176    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
177         $(am__cd) "$$dir" && rm -f $$files; }; \
178  }
179am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
180DATA = $(pkgconfig_DATA)
181RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
182  distclean-recursive maintainer-clean-recursive
183am__recursive_targets = \
184  $(RECURSIVE_TARGETS) \
185  $(RECURSIVE_CLEAN_TARGETS) \
186  $(am__extra_recursive_targets)
187AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
188	cscope distdir dist dist-all distcheck
189am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
190	$(LISP)config.h.in
191# Read a list of newline-separated strings from the standard input,
192# and print each of them once, without duplicates.  Input order is
193# *not* preserved.
194am__uniquify_input = $(AWK) '\
195  BEGIN { nonempty = 0; } \
196  { items[$$0] = 1; nonempty = 1; } \
197  END { if (nonempty) { for (i in items) print i; }; } \
198'
199# Make sure the list of sources is unique.  This is necessary because,
200# e.g., the same source file might be shared among _SOURCES variables
201# for different programs/libraries.
202am__define_uniq_tagged_files = \
203  list='$(am__tagged_files)'; \
204  unique=`for i in $$list; do \
205    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
206  done | $(am__uniquify_input)`
207ETAGS = etags
208CTAGS = ctags
209CSCOPE = cscope
210DIST_SUBDIRS = $(SUBDIRS)
211am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
212	$(srcdir)/fontenc.pc.in COPYING ChangeLog INSTALL README \
213	compile config.guess config.sub install-sh ltmain.sh missing
214DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
215distdir = $(PACKAGE)-$(VERSION)
216top_distdir = $(distdir)
217am__remove_distdir = \
218  if test -d "$(distdir)"; then \
219    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
220      && rm -rf "$(distdir)" \
221      || { sleep 5 && rm -rf "$(distdir)"; }; \
222  else :; fi
223am__post_remove_distdir = $(am__remove_distdir)
224am__relativize = \
225  dir0=`pwd`; \
226  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
227  sed_rest='s,^[^/]*/*,,'; \
228  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
229  sed_butlast='s,/*[^/]*$$,,'; \
230  while test -n "$$dir1"; do \
231    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
232    if test "$$first" != "."; then \
233      if test "$$first" = ".."; then \
234        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
235        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
236      else \
237        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
238        if test "$$first2" = "$$first"; then \
239          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
240        else \
241          dir2="../$$dir2"; \
242        fi; \
243        dir0="$$dir0"/"$$first"; \
244      fi; \
245    fi; \
246    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
247  done; \
248  reldir="$$dir2"
249DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
250GZIP_ENV = --best
251DIST_TARGETS = dist-bzip2 dist-gzip
252distuninstallcheck_listfiles = find . -type f -print
253am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
254  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
255distcleancheck_listfiles = find . -type f -print
256ACLOCAL = @ACLOCAL@
257ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
258ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
259AMTAR = @AMTAR@
260AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
261APP_MAN_DIR = @APP_MAN_DIR@
262APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
263AR = @AR@
264AUTOCONF = @AUTOCONF@
265AUTOHEADER = @AUTOHEADER@
266AUTOMAKE = @AUTOMAKE@
267AWK = @AWK@
268BASE_CFLAGS = @BASE_CFLAGS@
269CC = @CC@
270CCDEPMODE = @CCDEPMODE@
271CFLAGS = @CFLAGS@
272CHANGELOG_CMD = @CHANGELOG_CMD@
273CPP = @CPP@
274CPPFLAGS = @CPPFLAGS@
275CWARNFLAGS = @CWARNFLAGS@
276CYGPATH_W = @CYGPATH_W@
277DEFS = @DEFS@
278DEPDIR = @DEPDIR@
279DLLTOOL = @DLLTOOL@
280DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
281DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
282DSYMUTIL = @DSYMUTIL@
283DUMPBIN = @DUMPBIN@
284ECHO_C = @ECHO_C@
285ECHO_N = @ECHO_N@
286ECHO_T = @ECHO_T@
287EGREP = @EGREP@
288ENCODINGSDIR = @ENCODINGSDIR@
289EXEEXT = @EXEEXT@
290FGREP = @FGREP@
291FILE_MAN_DIR = @FILE_MAN_DIR@
292FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
293FONTENC_CFLAGS = @FONTENC_CFLAGS@
294FONTENC_LIBS = @FONTENC_LIBS@
295FONTROOTDIR = @FONTROOTDIR@
296GREP = @GREP@
297INSTALL = @INSTALL@
298INSTALL_CMD = @INSTALL_CMD@
299INSTALL_DATA = @INSTALL_DATA@
300INSTALL_PROGRAM = @INSTALL_PROGRAM@
301INSTALL_SCRIPT = @INSTALL_SCRIPT@
302INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
303LD = @LD@
304LDFLAGS = @LDFLAGS@
305LIBOBJS = @LIBOBJS@
306LIBS = @LIBS@
307LIBTOOL = @LIBTOOL@
308LIB_MAN_DIR = @LIB_MAN_DIR@
309LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
310LINT = @LINT@
311LINT_FLAGS = @LINT_FLAGS@
312LIPO = @LIPO@
313LN_S = @LN_S@
314LTLIBOBJS = @LTLIBOBJS@
315MAKEINFO = @MAKEINFO@
316MANIFEST_TOOL = @MANIFEST_TOOL@
317MAN_SUBSTS = @MAN_SUBSTS@
318MISC_MAN_DIR = @MISC_MAN_DIR@
319MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
320MKDIR_P = @MKDIR_P@
321NM = @NM@
322NMEDIT = @NMEDIT@
323OBJDUMP = @OBJDUMP@
324OBJEXT = @OBJEXT@
325OTOOL = @OTOOL@
326OTOOL64 = @OTOOL64@
327PACKAGE = @PACKAGE@
328PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
329PACKAGE_NAME = @PACKAGE_NAME@
330PACKAGE_STRING = @PACKAGE_STRING@
331PACKAGE_TARNAME = @PACKAGE_TARNAME@
332PACKAGE_URL = @PACKAGE_URL@
333PACKAGE_VERSION = @PACKAGE_VERSION@
334PATH_SEPARATOR = @PATH_SEPARATOR@
335PKG_CONFIG = @PKG_CONFIG@
336RANLIB = @RANLIB@
337SED = @SED@
338SET_MAKE = @SET_MAKE@
339SHELL = @SHELL@
340STRICT_CFLAGS = @STRICT_CFLAGS@
341STRIP = @STRIP@
342VERSION = @VERSION@
343XORG_MAN_PAGE = @XORG_MAN_PAGE@
344abs_builddir = @abs_builddir@
345abs_srcdir = @abs_srcdir@
346abs_top_builddir = @abs_top_builddir@
347abs_top_srcdir = @abs_top_srcdir@
348ac_ct_AR = @ac_ct_AR@
349ac_ct_CC = @ac_ct_CC@
350ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
351am__include = @am__include@
352am__leading_dot = @am__leading_dot@
353am__quote = @am__quote@
354am__tar = @am__tar@
355am__untar = @am__untar@
356bindir = @bindir@
357build = @build@
358build_alias = @build_alias@
359build_cpu = @build_cpu@
360build_os = @build_os@
361build_vendor = @build_vendor@
362builddir = @builddir@
363datadir = @datadir@
364datarootdir = @datarootdir@
365docdir = @docdir@
366dvidir = @dvidir@
367exec_prefix = @exec_prefix@
368host = @host@
369host_alias = @host_alias@
370host_cpu = @host_cpu@
371host_os = @host_os@
372host_vendor = @host_vendor@
373htmldir = @htmldir@
374includedir = @includedir@
375infodir = @infodir@
376install_sh = @install_sh@
377libdir = @libdir@
378libexecdir = @libexecdir@
379localedir = @localedir@
380localstatedir = @localstatedir@
381mandir = @mandir@
382mkdir_p = @mkdir_p@
383oldincludedir = @oldincludedir@
384pdfdir = @pdfdir@
385prefix = @prefix@
386program_transform_name = @program_transform_name@
387psdir = @psdir@
388sbindir = @sbindir@
389sharedstatedir = @sharedstatedir@
390srcdir = @srcdir@
391sysconfdir = @sysconfdir@
392target_alias = @target_alias@
393top_build_prefix = @top_build_prefix@
394top_builddir = @top_builddir@
395top_srcdir = @top_srcdir@
396SUBDIRS = src
397pkgconfigdir = $(libdir)/pkgconfig
398pkgconfig_DATA = fontenc.pc
399MAINTAINERCLEANFILES = ChangeLog INSTALL
400all: config.h
401	$(MAKE) $(AM_MAKEFLAGS) all-recursive
402
403.SUFFIXES:
404am--refresh: Makefile
405	@:
406$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
407	@for dep in $?; do \
408	  case '$(am__configure_deps)' in \
409	    *$$dep*) \
410	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
411	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
412		&& exit 0; \
413	      exit 1;; \
414	  esac; \
415	done; \
416	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
417	$(am__cd) $(top_srcdir) && \
418	  $(AUTOMAKE) --foreign Makefile
419Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
420	@case '$?' in \
421	  *config.status*) \
422	    echo ' $(SHELL) ./config.status'; \
423	    $(SHELL) ./config.status;; \
424	  *) \
425	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
426	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
427	esac;
428
429$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
430	$(SHELL) ./config.status --recheck
431
432$(top_srcdir)/configure:  $(am__configure_deps)
433	$(am__cd) $(srcdir) && $(AUTOCONF)
434$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
435	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
436$(am__aclocal_m4_deps):
437
438config.h: stamp-h1
439	@test -f $@ || rm -f stamp-h1
440	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
441
442stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
443	@rm -f stamp-h1
444	cd $(top_builddir) && $(SHELL) ./config.status config.h
445$(srcdir)/config.h.in:  $(am__configure_deps) 
446	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
447	rm -f stamp-h1
448	touch $@
449
450distclean-hdr:
451	-rm -f config.h stamp-h1
452fontenc.pc: $(top_builddir)/config.status $(srcdir)/fontenc.pc.in
453	cd $(top_builddir) && $(SHELL) ./config.status $@
454
455mostlyclean-libtool:
456	-rm -f *.lo
457
458clean-libtool:
459	-rm -rf .libs _libs
460
461distclean-libtool:
462	-rm -f libtool config.lt
463install-pkgconfigDATA: $(pkgconfig_DATA)
464	@$(NORMAL_INSTALL)
465	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
466	if test -n "$$list"; then \
467	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
468	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
469	fi; \
470	for p in $$list; do \
471	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
472	  echo "$$d$$p"; \
473	done | $(am__base_list) | \
474	while read files; do \
475	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
476	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
477	done
478
479uninstall-pkgconfigDATA:
480	@$(NORMAL_UNINSTALL)
481	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
482	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
483	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
484
485# This directory's subdirectories are mostly independent; you can cd
486# into them and run 'make' without going through this Makefile.
487# To change the values of 'make' variables: instead of editing Makefiles,
488# (1) if the variable is set in 'config.status', edit 'config.status'
489#     (which will cause the Makefiles to be regenerated when you run 'make');
490# (2) otherwise, pass the desired values on the 'make' command line.
491$(am__recursive_targets):
492	@fail=; \
493	if $(am__make_keepgoing); then \
494	  failcom='fail=yes'; \
495	else \
496	  failcom='exit 1'; \
497	fi; \
498	dot_seen=no; \
499	target=`echo $@ | sed s/-recursive//`; \
500	case "$@" in \
501	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
502	  *) list='$(SUBDIRS)' ;; \
503	esac; \
504	for subdir in $$list; do \
505	  echo "Making $$target in $$subdir"; \
506	  if test "$$subdir" = "."; then \
507	    dot_seen=yes; \
508	    local_target="$$target-am"; \
509	  else \
510	    local_target="$$target"; \
511	  fi; \
512	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
513	  || eval $$failcom; \
514	done; \
515	if test "$$dot_seen" = "no"; then \
516	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
517	fi; test -z "$$fail"
518
519ID: $(am__tagged_files)
520	$(am__define_uniq_tagged_files); mkid -fID $$unique
521tags: tags-recursive
522TAGS: tags
523
524tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
525	set x; \
526	here=`pwd`; \
527	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
528	  include_option=--etags-include; \
529	  empty_fix=.; \
530	else \
531	  include_option=--include; \
532	  empty_fix=; \
533	fi; \
534	list='$(SUBDIRS)'; for subdir in $$list; do \
535	  if test "$$subdir" = .; then :; else \
536	    test ! -f $$subdir/TAGS || \
537	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
538	  fi; \
539	done; \
540	$(am__define_uniq_tagged_files); \
541	shift; \
542	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
543	  test -n "$$unique" || unique=$$empty_fix; \
544	  if test $$# -gt 0; then \
545	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
546	      "$$@" $$unique; \
547	  else \
548	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
549	      $$unique; \
550	  fi; \
551	fi
552ctags: ctags-recursive
553
554CTAGS: ctags
555ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
556	$(am__define_uniq_tagged_files); \
557	test -z "$(CTAGS_ARGS)$$unique" \
558	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
559	     $$unique
560
561GTAGS:
562	here=`$(am__cd) $(top_builddir) && pwd` \
563	  && $(am__cd) $(top_srcdir) \
564	  && gtags -i $(GTAGS_ARGS) "$$here"
565cscope: cscope.files
566	test ! -s cscope.files \
567	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
568clean-cscope:
569	-rm -f cscope.files
570cscope.files: clean-cscope cscopelist
571cscopelist: cscopelist-recursive
572
573cscopelist-am: $(am__tagged_files)
574	list='$(am__tagged_files)'; \
575	case "$(srcdir)" in \
576	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
577	  *) sdir=$(subdir)/$(srcdir) ;; \
578	esac; \
579	for i in $$list; do \
580	  if test -f "$$i"; then \
581	    echo "$(subdir)/$$i"; \
582	  else \
583	    echo "$$sdir/$$i"; \
584	  fi; \
585	done >> $(top_builddir)/cscope.files
586
587distclean-tags:
588	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
589	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
590
591distdir: $(DISTFILES)
592	$(am__remove_distdir)
593	test -d "$(distdir)" || mkdir "$(distdir)"
594	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
595	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
596	list='$(DISTFILES)'; \
597	  dist_files=`for file in $$list; do echo $$file; done | \
598	  sed -e "s|^$$srcdirstrip/||;t" \
599	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
600	case $$dist_files in \
601	  */*) $(MKDIR_P) `echo "$$dist_files" | \
602			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
603			   sort -u` ;; \
604	esac; \
605	for file in $$dist_files; do \
606	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
607	  if test -d $$d/$$file; then \
608	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
609	    if test -d "$(distdir)/$$file"; then \
610	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
611	    fi; \
612	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
613	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
614	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
615	    fi; \
616	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
617	  else \
618	    test -f "$(distdir)/$$file" \
619	    || cp -p $$d/$$file "$(distdir)/$$file" \
620	    || exit 1; \
621	  fi; \
622	done
623	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
624	  if test "$$subdir" = .; then :; else \
625	    $(am__make_dryrun) \
626	      || test -d "$(distdir)/$$subdir" \
627	      || $(MKDIR_P) "$(distdir)/$$subdir" \
628	      || exit 1; \
629	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
630	    $(am__relativize); \
631	    new_distdir=$$reldir; \
632	    dir1=$$subdir; dir2="$(top_distdir)"; \
633	    $(am__relativize); \
634	    new_top_distdir=$$reldir; \
635	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
636	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
637	    ($(am__cd) $$subdir && \
638	      $(MAKE) $(AM_MAKEFLAGS) \
639	        top_distdir="$$new_top_distdir" \
640	        distdir="$$new_distdir" \
641		am__remove_distdir=: \
642		am__skip_length_check=: \
643		am__skip_mode_fix=: \
644	        distdir) \
645	      || exit 1; \
646	  fi; \
647	done
648	$(MAKE) $(AM_MAKEFLAGS) \
649	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
650	  dist-hook
651	-test -n "$(am__skip_mode_fix)" \
652	|| find "$(distdir)" -type d ! -perm -755 \
653		-exec chmod u+rwx,go+rx {} \; -o \
654	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
655	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
656	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
657	|| chmod -R a+r "$(distdir)"
658dist-gzip: distdir
659	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
660	$(am__post_remove_distdir)
661dist-bzip2: distdir
662	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
663	$(am__post_remove_distdir)
664
665dist-lzip: distdir
666	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
667	$(am__post_remove_distdir)
668
669dist-xz: distdir
670	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
671	$(am__post_remove_distdir)
672
673dist-tarZ: distdir
674	@echo WARNING: "Support for distribution archives compressed with" \
675		       "legacy program 'compress' is deprecated." >&2
676	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
677	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
678	$(am__post_remove_distdir)
679
680dist-shar: distdir
681	@echo WARNING: "Support for shar distribution archives is" \
682	               "deprecated." >&2
683	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
684	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
685	$(am__post_remove_distdir)
686
687dist-zip: distdir
688	-rm -f $(distdir).zip
689	zip -rq $(distdir).zip $(distdir)
690	$(am__post_remove_distdir)
691
692dist dist-all:
693	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
694	$(am__post_remove_distdir)
695
696# This target untars the dist file and tries a VPATH configuration.  Then
697# it guarantees that the distribution is self-contained by making another
698# tarfile.
699distcheck: dist
700	case '$(DIST_ARCHIVES)' in \
701	*.tar.gz*) \
702	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
703	*.tar.bz2*) \
704	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
705	*.tar.lz*) \
706	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
707	*.tar.xz*) \
708	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
709	*.tar.Z*) \
710	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
711	*.shar.gz*) \
712	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
713	*.zip*) \
714	  unzip $(distdir).zip ;;\
715	esac
716	chmod -R a-w $(distdir)
717	chmod u+w $(distdir)
718	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
719	chmod a-w $(distdir)
720	test -d $(distdir)/_build || exit 0; \
721	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
722	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
723	  && am__cwd=`pwd` \
724	  && $(am__cd) $(distdir)/_build/sub \
725	  && ../../configure \
726	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
727	    $(DISTCHECK_CONFIGURE_FLAGS) \
728	    --srcdir=../.. --prefix="$$dc_install_base" \
729	  && $(MAKE) $(AM_MAKEFLAGS) \
730	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
731	  && $(MAKE) $(AM_MAKEFLAGS) check \
732	  && $(MAKE) $(AM_MAKEFLAGS) install \
733	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
734	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
735	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
736	        distuninstallcheck \
737	  && chmod -R a-w "$$dc_install_base" \
738	  && ({ \
739	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
740	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
741	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
742	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
743	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
744	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
745	  && rm -rf "$$dc_destdir" \
746	  && $(MAKE) $(AM_MAKEFLAGS) dist \
747	  && rm -rf $(DIST_ARCHIVES) \
748	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
749	  && cd "$$am__cwd" \
750	  || exit 1
751	$(am__post_remove_distdir)
752	@(echo "$(distdir) archives ready for distribution: "; \
753	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
754	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
755distuninstallcheck:
756	@test -n '$(distuninstallcheck_dir)' || { \
757	  echo 'ERROR: trying to run $@ with an empty' \
758	       '$$(distuninstallcheck_dir)' >&2; \
759	  exit 1; \
760	}; \
761	$(am__cd) '$(distuninstallcheck_dir)' || { \
762	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
763	  exit 1; \
764	}; \
765	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
766	   || { echo "ERROR: files left after uninstall:" ; \
767	        if test -n "$(DESTDIR)"; then \
768	          echo "  (check DESTDIR support)"; \
769	        fi ; \
770	        $(distuninstallcheck_listfiles) ; \
771	        exit 1; } >&2
772distcleancheck: distclean
773	@if test '$(srcdir)' = . ; then \
774	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
775	  exit 1 ; \
776	fi
777	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
778	  || { echo "ERROR: files left in build directory after distclean:" ; \
779	       $(distcleancheck_listfiles) ; \
780	       exit 1; } >&2
781check-am: all-am
782check: check-recursive
783all-am: Makefile $(DATA) config.h
784installdirs: installdirs-recursive
785installdirs-am:
786	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
787	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
788	done
789install: install-recursive
790install-exec: install-exec-recursive
791install-data: install-data-recursive
792uninstall: uninstall-recursive
793
794install-am: all-am
795	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
796
797installcheck: installcheck-recursive
798install-strip:
799	if test -z '$(STRIP)'; then \
800	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
801	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
802	      install; \
803	else \
804	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
805	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
806	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
807	fi
808mostlyclean-generic:
809
810clean-generic:
811
812distclean-generic:
813	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
814	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
815
816maintainer-clean-generic:
817	@echo "This command is intended for maintainers to use"
818	@echo "it deletes files that may require special tools to rebuild."
819	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
820clean: clean-recursive
821
822clean-am: clean-generic clean-libtool mostlyclean-am
823
824distclean: distclean-recursive
825	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
826	-rm -f Makefile
827distclean-am: clean-am distclean-generic distclean-hdr \
828	distclean-libtool distclean-tags
829
830dvi: dvi-recursive
831
832dvi-am:
833
834html: html-recursive
835
836html-am:
837
838info: info-recursive
839
840info-am:
841
842install-data-am: install-pkgconfigDATA
843
844install-dvi: install-dvi-recursive
845
846install-dvi-am:
847
848install-exec-am:
849
850install-html: install-html-recursive
851
852install-html-am:
853
854install-info: install-info-recursive
855
856install-info-am:
857
858install-man:
859
860install-pdf: install-pdf-recursive
861
862install-pdf-am:
863
864install-ps: install-ps-recursive
865
866install-ps-am:
867
868installcheck-am:
869
870maintainer-clean: maintainer-clean-recursive
871	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
872	-rm -rf $(top_srcdir)/autom4te.cache
873	-rm -f Makefile
874maintainer-clean-am: distclean-am maintainer-clean-generic
875
876mostlyclean: mostlyclean-recursive
877
878mostlyclean-am: mostlyclean-generic mostlyclean-libtool
879
880pdf: pdf-recursive
881
882pdf-am:
883
884ps: ps-recursive
885
886ps-am:
887
888uninstall-am: uninstall-pkgconfigDATA
889
890.MAKE: $(am__recursive_targets) all install-am install-strip
891
892.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
893	am--refresh check check-am clean clean-cscope clean-generic \
894	clean-libtool cscope cscopelist-am ctags ctags-am dist \
895	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
896	dist-tarZ dist-xz dist-zip distcheck distclean \
897	distclean-generic distclean-hdr distclean-libtool \
898	distclean-tags distcleancheck distdir distuninstallcheck dvi \
899	dvi-am html html-am info info-am install install-am \
900	install-data install-data-am install-dvi install-dvi-am \
901	install-exec install-exec-am install-html install-html-am \
902	install-info install-info-am install-man install-pdf \
903	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
904	install-strip installcheck installcheck-am installdirs \
905	installdirs-am maintainer-clean maintainer-clean-generic \
906	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
907	ps ps-am tags tags-am uninstall uninstall-am \
908	uninstall-pkgconfigDATA
909
910.PRECIOUS: Makefile
911
912
913.PHONY: ChangeLog INSTALL
914
915INSTALL:
916	$(INSTALL_CMD)
917
918ChangeLog:
919	$(CHANGELOG_CMD)
920
921dist-hook: ChangeLog INSTALL
922
923@LINT_TRUE@lint:
924@LINT_TRUE@	(cd src && $(MAKE) $(MFLAGS) lint)
925
926# Tell versions [3.59,3.63) of GNU make to not export all variables.
927# Otherwise a system limit (for SysV at least) may be exceeded.
928.NOEXPORT:
929