Makefile.in revision a4f78def 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17VPATH = @srcdir@
18am__is_gnu_make = { \
19  if test -z '$(MAKELEVEL)'; then \
20    false; \
21  elif test -n '$(MAKE_HOST)'; then \
22    true; \
23  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
24    true; \
25  else \
26    false; \
27  fi; \
28}
29am__make_running_with_option = \
30  case $${target_option-} in \
31      ?) ;; \
32      *) echo "am__make_running_with_option: internal error: invalid" \
33              "target option '$${target_option-}' specified" >&2; \
34         exit 1;; \
35  esac; \
36  has_opt=no; \
37  sane_makeflags=$$MAKEFLAGS; \
38  if $(am__is_gnu_make); then \
39    sane_makeflags=$$MFLAGS; \
40  else \
41    case $$MAKEFLAGS in \
42      *\\[\ \	]*) \
43        bs=\\; \
44        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
45          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
46    esac; \
47  fi; \
48  skip_next=no; \
49  strip_trailopt () \
50  { \
51    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
52  }; \
53  for flg in $$sane_makeflags; do \
54    test $$skip_next = yes && { skip_next=no; continue; }; \
55    case $$flg in \
56      *=*|--*) continue;; \
57        -*I) strip_trailopt 'I'; skip_next=yes;; \
58      -*I?*) strip_trailopt 'I';; \
59        -*O) strip_trailopt 'O'; skip_next=yes;; \
60      -*O?*) strip_trailopt 'O';; \
61        -*l) strip_trailopt 'l'; skip_next=yes;; \
62      -*l?*) strip_trailopt 'l';; \
63      -[dEDm]) skip_next=yes;; \
64      -[JT]) skip_next=yes;; \
65    esac; \
66    case $$flg in \
67      *$$target_option*) has_opt=yes; break;; \
68    esac; \
69  done; \
70  test $$has_opt = yes
71am__make_dryrun = (target_option=n; $(am__make_running_with_option))
72am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
73pkgdatadir = $(datadir)/@PACKAGE@
74pkgincludedir = $(includedir)/@PACKAGE@
75pkglibdir = $(libdir)/@PACKAGE@
76pkglibexecdir = $(libexecdir)/@PACKAGE@
77am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
78install_sh_DATA = $(install_sh) -c -m 644
79install_sh_PROGRAM = $(install_sh) -c
80install_sh_SCRIPT = $(install_sh) -c
81INSTALL_HEADER = $(INSTALL_DATA)
82transform = $(program_transform_name)
83NORMAL_INSTALL = :
84PRE_INSTALL = :
85POST_INSTALL = :
86NORMAL_UNINSTALL = :
87PRE_UNINSTALL = :
88POST_UNINSTALL = :
89build_triplet = @build@
90host_triplet = @host@
91subdir = .
92ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
93am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
94	$(top_srcdir)/configure.ac
95am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
96	$(ACLOCAL_M4)
97DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
98	$(am__configure_deps) $(am__DIST_COMMON)
99am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
100 configure.lineno config.status.lineno
101mkinstalldirs = $(install_sh) -d
102CONFIG_HEADER = config.h
103CONFIG_CLEAN_FILES = vdpau.pc
104CONFIG_CLEAN_VPATH_FILES =
105AM_V_P = $(am__v_P_@AM_V@)
106am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
107am__v_P_0 = false
108am__v_P_1 = :
109AM_V_GEN = $(am__v_GEN_@AM_V@)
110am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
111am__v_GEN_0 = @echo "  GEN     " $@;
112am__v_GEN_1 = 
113AM_V_at = $(am__v_at_@AM_V@)
114am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
115am__v_at_0 = @
116am__v_at_1 = 
117SOURCES =
118DIST_SOURCES =
119RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
120	ctags-recursive dvi-recursive html-recursive info-recursive \
121	install-data-recursive install-dvi-recursive \
122	install-exec-recursive install-html-recursive \
123	install-info-recursive install-pdf-recursive \
124	install-ps-recursive install-recursive installcheck-recursive \
125	installdirs-recursive pdf-recursive ps-recursive \
126	tags-recursive uninstall-recursive
127am__can_run_installinfo = \
128  case $$AM_UPDATE_INFO_DIR in \
129    n|no|NO) false;; \
130    *) (install-info --version) >/dev/null 2>&1;; \
131  esac
132am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
133am__vpath_adj = case $$p in \
134    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
135    *) f=$$p;; \
136  esac;
137am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
138am__install_max = 40
139am__nobase_strip_setup = \
140  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
141am__nobase_strip = \
142  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
143am__nobase_list = $(am__nobase_strip_setup); \
144  for p in $$list; do echo "$$p $$p"; done | \
145  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
146  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
147    if (++n[$$2] == $(am__install_max)) \
148      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
149    END { for (dir in files) print dir, files[dir] }'
150am__base_list = \
151  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
152  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
153am__uninstall_files_from_dir = { \
154  test -z "$$files" \
155    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
156    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
157         $(am__cd) "$$dir" && rm -f $$files; }; \
158  }
159am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
160DATA = $(pkgconfig_DATA)
161RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
162  distclean-recursive maintainer-clean-recursive
163am__recursive_targets = \
164  $(RECURSIVE_TARGETS) \
165  $(RECURSIVE_CLEAN_TARGETS) \
166  $(am__extra_recursive_targets)
167AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
168	cscope distdir dist dist-all distcheck
169am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
170	$(LISP)config.h.in
171# Read a list of newline-separated strings from the standard input,
172# and print each of them once, without duplicates.  Input order is
173# *not* preserved.
174am__uniquify_input = $(AWK) '\
175  BEGIN { nonempty = 0; } \
176  { items[$$0] = 1; nonempty = 1; } \
177  END { if (nonempty) { for (i in items) print i; }; } \
178'
179# Make sure the list of sources is unique.  This is necessary because,
180# e.g., the same source file might be shared among _SOURCES variables
181# for different programs/libraries.
182am__define_uniq_tagged_files = \
183  list='$(am__tagged_files)'; \
184  unique=`for i in $$list; do \
185    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
186  done | $(am__uniquify_input)`
187ETAGS = etags
188CTAGS = ctags
189CSCOPE = cscope
190DIST_SUBDIRS = $(SUBDIRS)
191am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
192	$(srcdir)/vdpau.pc.in AUTHORS COPYING ChangeLog INSTALL NEWS \
193	README compile config.guess config.sub install-sh ltmain.sh \
194	missing
195DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
196distdir = $(PACKAGE)-$(VERSION)
197top_distdir = $(distdir)
198am__remove_distdir = \
199  if test -d "$(distdir)"; then \
200    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
201      && rm -rf "$(distdir)" \
202      || { sleep 5 && rm -rf "$(distdir)"; }; \
203  else :; fi
204am__post_remove_distdir = $(am__remove_distdir)
205am__relativize = \
206  dir0=`pwd`; \
207  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
208  sed_rest='s,^[^/]*/*,,'; \
209  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
210  sed_butlast='s,/*[^/]*$$,,'; \
211  while test -n "$$dir1"; do \
212    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
213    if test "$$first" != "."; then \
214      if test "$$first" = ".."; then \
215        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
216        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
217      else \
218        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
219        if test "$$first2" = "$$first"; then \
220          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
221        else \
222          dir2="../$$dir2"; \
223        fi; \
224        dir0="$$dir0"/"$$first"; \
225      fi; \
226    fi; \
227    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
228  done; \
229  reldir="$$dir2"
230DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
231GZIP_ENV = --best
232DIST_TARGETS = dist-bzip2 dist-gzip
233distuninstallcheck_listfiles = find . -type f -print
234am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
235  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
236ACLOCAL = @ACLOCAL@
237AMTAR = @AMTAR@
238AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
239AR = @AR@
240AUTOCONF = @AUTOCONF@
241AUTOHEADER = @AUTOHEADER@
242AUTOMAKE = @AUTOMAKE@
243AWK = @AWK@
244CC = @CC@
245CCDEPMODE = @CCDEPMODE@
246CFLAGS = @CFLAGS@
247CHANGELOG_CMD = @CHANGELOG_CMD@
248CPP = @CPP@
249CPPFLAGS = @CPPFLAGS@
250CXX = @CXX@
251CXXCPP = @CXXCPP@
252CXXDEPMODE = @CXXDEPMODE@
253CXXFLAGS = @CXXFLAGS@
254CYGPATH_W = @CYGPATH_W@
255DEFS = @DEFS@
256DEPDIR = @DEPDIR@
257DLLTOOL = @DLLTOOL@
258DLOPEN_LIBS = @DLOPEN_LIBS@
259DOT = @DOT@
260DOXYGEN = @DOXYGEN@
261DSYMUTIL = @DSYMUTIL@
262DUMPBIN = @DUMPBIN@
263ECHO_C = @ECHO_C@
264ECHO_N = @ECHO_N@
265ECHO_T = @ECHO_T@
266EGREP = @EGREP@
267EXEEXT = @EXEEXT@
268FGREP = @FGREP@
269GREP = @GREP@
270INSTALL = @INSTALL@
271INSTALL_DATA = @INSTALL_DATA@
272INSTALL_PROGRAM = @INSTALL_PROGRAM@
273INSTALL_SCRIPT = @INSTALL_SCRIPT@
274INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
275LD = @LD@
276LDFLAGS = @LDFLAGS@
277LIBOBJS = @LIBOBJS@
278LIBS = @LIBS@
279LIBTOOL = @LIBTOOL@
280LIPO = @LIPO@
281LN_S = @LN_S@
282LTLIBOBJS = @LTLIBOBJS@
283LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
284MAKEINFO = @MAKEINFO@
285MANIFEST_TOOL = @MANIFEST_TOOL@
286MKDIR_P = @MKDIR_P@
287NM = @NM@
288NMEDIT = @NMEDIT@
289OBJDUMP = @OBJDUMP@
290OBJEXT = @OBJEXT@
291OTOOL = @OTOOL@
292OTOOL64 = @OTOOL64@
293PACKAGE = @PACKAGE@
294PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
295PACKAGE_NAME = @PACKAGE_NAME@
296PACKAGE_STRING = @PACKAGE_STRING@
297PACKAGE_TARNAME = @PACKAGE_TARNAME@
298PACKAGE_URL = @PACKAGE_URL@
299PACKAGE_VERSION = @PACKAGE_VERSION@
300PATH_SEPARATOR = @PATH_SEPARATOR@
301PKG_CONFIG = @PKG_CONFIG@
302PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
303PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
304PTHREAD_LIBS = @PTHREAD_LIBS@
305RANLIB = @RANLIB@
306SED = @SED@
307SET_MAKE = @SET_MAKE@
308SHELL = @SHELL@
309STRIP = @STRIP@
310VERSION = @VERSION@
311X11_CFLAGS = @X11_CFLAGS@
312X11_LIBS = @X11_LIBS@
313XEXT_CFLAGS = @XEXT_CFLAGS@
314XEXT_LIBS = @XEXT_LIBS@
315abs_builddir = @abs_builddir@
316abs_srcdir = @abs_srcdir@
317abs_top_builddir = @abs_top_builddir@
318abs_top_srcdir = @abs_top_srcdir@
319ac_ct_AR = @ac_ct_AR@
320ac_ct_CC = @ac_ct_CC@
321ac_ct_CXX = @ac_ct_CXX@
322ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
323am__include = @am__include@
324am__leading_dot = @am__leading_dot@
325am__quote = @am__quote@
326am__tar = @am__tar@
327am__untar = @am__untar@
328bindir = @bindir@
329build = @build@
330build_alias = @build_alias@
331build_cpu = @build_cpu@
332build_os = @build_os@
333build_vendor = @build_vendor@
334builddir = @builddir@
335datadir = @datadir@
336datarootdir = @datarootdir@
337distcleancheck_listfiles = @distcleancheck_listfiles@
338docdir = @docdir@
339dri2proto_CFLAGS = @dri2proto_CFLAGS@
340dri2proto_LIBS = @dri2proto_LIBS@
341dvidir = @dvidir@
342exec_prefix = @exec_prefix@
343host = @host@
344host_alias = @host_alias@
345host_cpu = @host_cpu@
346host_os = @host_os@
347host_vendor = @host_vendor@
348htmldir = @htmldir@
349includedir = @includedir@
350infodir = @infodir@
351install_sh = @install_sh@
352libdir = @libdir@
353libexecdir = @libexecdir@
354localedir = @localedir@
355localstatedir = @localstatedir@
356mandir = @mandir@
357mkdir_p = @mkdir_p@
358moduledir = @moduledir@
359oldincludedir = @oldincludedir@
360pdfdir = @pdfdir@
361prefix = @prefix@
362program_transform_name = @program_transform_name@
363psdir = @psdir@
364sbindir = @sbindir@
365sharedstatedir = @sharedstatedir@
366srcdir = @srcdir@
367sysconfdir = @sysconfdir@
368target_alias = @target_alias@
369top_build_prefix = @top_build_prefix@
370top_builddir = @top_builddir@
371top_srcdir = @top_srcdir@
372SUBDIRS = doc src test trace
373pkgconfigdir = $(libdir)/pkgconfig
374pkgconfig_DATA = vdpau.pc
375EXTRA_DIST = vdpau.pc.in autogen.sh ChangeLog
376all: config.h
377	$(MAKE) $(AM_MAKEFLAGS) all-recursive
378
379.SUFFIXES:
380am--refresh: Makefile
381	@:
382$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
383	@for dep in $?; do \
384	  case '$(am__configure_deps)' in \
385	    *$$dep*) \
386	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
387	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
388		&& exit 0; \
389	      exit 1;; \
390	  esac; \
391	done; \
392	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
393	$(am__cd) $(top_srcdir) && \
394	  $(AUTOMAKE) --foreign Makefile
395Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
396	@case '$?' in \
397	  *config.status*) \
398	    echo ' $(SHELL) ./config.status'; \
399	    $(SHELL) ./config.status;; \
400	  *) \
401	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
402	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
403	esac;
404
405$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
406	$(SHELL) ./config.status --recheck
407
408$(top_srcdir)/configure:  $(am__configure_deps)
409	$(am__cd) $(srcdir) && $(AUTOCONF)
410$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
411	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
412$(am__aclocal_m4_deps):
413
414config.h: stamp-h1
415	@test -f $@ || rm -f stamp-h1
416	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
417
418stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
419	@rm -f stamp-h1
420	cd $(top_builddir) && $(SHELL) ./config.status config.h
421$(srcdir)/config.h.in:  $(am__configure_deps) 
422	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
423	rm -f stamp-h1
424	touch $@
425
426distclean-hdr:
427	-rm -f config.h stamp-h1
428vdpau.pc: $(top_builddir)/config.status $(srcdir)/vdpau.pc.in
429	cd $(top_builddir) && $(SHELL) ./config.status $@
430
431mostlyclean-libtool:
432	-rm -f *.lo
433
434clean-libtool:
435	-rm -rf .libs _libs
436
437distclean-libtool:
438	-rm -f libtool config.lt
439install-pkgconfigDATA: $(pkgconfig_DATA)
440	@$(NORMAL_INSTALL)
441	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
442	if test -n "$$list"; then \
443	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
444	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
445	fi; \
446	for p in $$list; do \
447	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
448	  echo "$$d$$p"; \
449	done | $(am__base_list) | \
450	while read files; do \
451	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
452	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
453	done
454
455uninstall-pkgconfigDATA:
456	@$(NORMAL_UNINSTALL)
457	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
458	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
459	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
460
461# This directory's subdirectories are mostly independent; you can cd
462# into them and run 'make' without going through this Makefile.
463# To change the values of 'make' variables: instead of editing Makefiles,
464# (1) if the variable is set in 'config.status', edit 'config.status'
465#     (which will cause the Makefiles to be regenerated when you run 'make');
466# (2) otherwise, pass the desired values on the 'make' command line.
467$(am__recursive_targets):
468	@fail=; \
469	if $(am__make_keepgoing); then \
470	  failcom='fail=yes'; \
471	else \
472	  failcom='exit 1'; \
473	fi; \
474	dot_seen=no; \
475	target=`echo $@ | sed s/-recursive//`; \
476	case "$@" in \
477	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
478	  *) list='$(SUBDIRS)' ;; \
479	esac; \
480	for subdir in $$list; do \
481	  echo "Making $$target in $$subdir"; \
482	  if test "$$subdir" = "."; then \
483	    dot_seen=yes; \
484	    local_target="$$target-am"; \
485	  else \
486	    local_target="$$target"; \
487	  fi; \
488	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
489	  || eval $$failcom; \
490	done; \
491	if test "$$dot_seen" = "no"; then \
492	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
493	fi; test -z "$$fail"
494
495ID: $(am__tagged_files)
496	$(am__define_uniq_tagged_files); mkid -fID $$unique
497tags: tags-recursive
498TAGS: tags
499
500tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
501	set x; \
502	here=`pwd`; \
503	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
504	  include_option=--etags-include; \
505	  empty_fix=.; \
506	else \
507	  include_option=--include; \
508	  empty_fix=; \
509	fi; \
510	list='$(SUBDIRS)'; for subdir in $$list; do \
511	  if test "$$subdir" = .; then :; else \
512	    test ! -f $$subdir/TAGS || \
513	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
514	  fi; \
515	done; \
516	$(am__define_uniq_tagged_files); \
517	shift; \
518	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
519	  test -n "$$unique" || unique=$$empty_fix; \
520	  if test $$# -gt 0; then \
521	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
522	      "$$@" $$unique; \
523	  else \
524	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
525	      $$unique; \
526	  fi; \
527	fi
528ctags: ctags-recursive
529
530CTAGS: ctags
531ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
532	$(am__define_uniq_tagged_files); \
533	test -z "$(CTAGS_ARGS)$$unique" \
534	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
535	     $$unique
536
537GTAGS:
538	here=`$(am__cd) $(top_builddir) && pwd` \
539	  && $(am__cd) $(top_srcdir) \
540	  && gtags -i $(GTAGS_ARGS) "$$here"
541cscope: cscope.files
542	test ! -s cscope.files \
543	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
544clean-cscope:
545	-rm -f cscope.files
546cscope.files: clean-cscope cscopelist
547cscopelist: cscopelist-recursive
548
549cscopelist-am: $(am__tagged_files)
550	list='$(am__tagged_files)'; \
551	case "$(srcdir)" in \
552	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
553	  *) sdir=$(subdir)/$(srcdir) ;; \
554	esac; \
555	for i in $$list; do \
556	  if test -f "$$i"; then \
557	    echo "$(subdir)/$$i"; \
558	  else \
559	    echo "$$sdir/$$i"; \
560	  fi; \
561	done >> $(top_builddir)/cscope.files
562
563distclean-tags:
564	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
565	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
566
567distdir: $(DISTFILES)
568	$(am__remove_distdir)
569	test -d "$(distdir)" || mkdir "$(distdir)"
570	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
571	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
572	list='$(DISTFILES)'; \
573	  dist_files=`for file in $$list; do echo $$file; done | \
574	  sed -e "s|^$$srcdirstrip/||;t" \
575	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
576	case $$dist_files in \
577	  */*) $(MKDIR_P) `echo "$$dist_files" | \
578			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
579			   sort -u` ;; \
580	esac; \
581	for file in $$dist_files; do \
582	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
583	  if test -d $$d/$$file; then \
584	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
585	    if test -d "$(distdir)/$$file"; then \
586	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
587	    fi; \
588	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
589	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
590	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
591	    fi; \
592	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
593	  else \
594	    test -f "$(distdir)/$$file" \
595	    || cp -p $$d/$$file "$(distdir)/$$file" \
596	    || exit 1; \
597	  fi; \
598	done
599	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
600	  if test "$$subdir" = .; then :; else \
601	    $(am__make_dryrun) \
602	      || test -d "$(distdir)/$$subdir" \
603	      || $(MKDIR_P) "$(distdir)/$$subdir" \
604	      || exit 1; \
605	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
606	    $(am__relativize); \
607	    new_distdir=$$reldir; \
608	    dir1=$$subdir; dir2="$(top_distdir)"; \
609	    $(am__relativize); \
610	    new_top_distdir=$$reldir; \
611	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
612	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
613	    ($(am__cd) $$subdir && \
614	      $(MAKE) $(AM_MAKEFLAGS) \
615	        top_distdir="$$new_top_distdir" \
616	        distdir="$$new_distdir" \
617		am__remove_distdir=: \
618		am__skip_length_check=: \
619		am__skip_mode_fix=: \
620	        distdir) \
621	      || exit 1; \
622	  fi; \
623	done
624	$(MAKE) $(AM_MAKEFLAGS) \
625	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
626	  dist-hook
627	-test -n "$(am__skip_mode_fix)" \
628	|| find "$(distdir)" -type d ! -perm -755 \
629		-exec chmod u+rwx,go+rx {} \; -o \
630	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
631	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
632	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
633	|| chmod -R a+r "$(distdir)"
634dist-gzip: distdir
635	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
636	$(am__post_remove_distdir)
637dist-bzip2: distdir
638	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
639	$(am__post_remove_distdir)
640
641dist-lzip: distdir
642	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
643	$(am__post_remove_distdir)
644
645dist-xz: distdir
646	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
647	$(am__post_remove_distdir)
648
649dist-tarZ: distdir
650	@echo WARNING: "Support for distribution archives compressed with" \
651		       "legacy program 'compress' is deprecated." >&2
652	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
653	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
654	$(am__post_remove_distdir)
655
656dist-shar: distdir
657	@echo WARNING: "Support for shar distribution archives is" \
658	               "deprecated." >&2
659	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
660	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
661	$(am__post_remove_distdir)
662
663dist-zip: distdir
664	-rm -f $(distdir).zip
665	zip -rq $(distdir).zip $(distdir)
666	$(am__post_remove_distdir)
667
668dist dist-all:
669	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
670	$(am__post_remove_distdir)
671
672# This target untars the dist file and tries a VPATH configuration.  Then
673# it guarantees that the distribution is self-contained by making another
674# tarfile.
675distcheck: dist
676	case '$(DIST_ARCHIVES)' in \
677	*.tar.gz*) \
678	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
679	*.tar.bz2*) \
680	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
681	*.tar.lz*) \
682	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
683	*.tar.xz*) \
684	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
685	*.tar.Z*) \
686	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
687	*.shar.gz*) \
688	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
689	*.zip*) \
690	  unzip $(distdir).zip ;;\
691	esac
692	chmod -R a-w $(distdir)
693	chmod u+w $(distdir)
694	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
695	chmod a-w $(distdir)
696	test -d $(distdir)/_build || exit 0; \
697	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
698	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
699	  && am__cwd=`pwd` \
700	  && $(am__cd) $(distdir)/_build/sub \
701	  && ../../configure \
702	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
703	    $(DISTCHECK_CONFIGURE_FLAGS) \
704	    --srcdir=../.. --prefix="$$dc_install_base" \
705	  && $(MAKE) $(AM_MAKEFLAGS) \
706	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
707	  && $(MAKE) $(AM_MAKEFLAGS) check \
708	  && $(MAKE) $(AM_MAKEFLAGS) install \
709	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
710	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
711	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
712	        distuninstallcheck \
713	  && chmod -R a-w "$$dc_install_base" \
714	  && ({ \
715	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
716	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
717	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
718	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
719	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
720	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
721	  && rm -rf "$$dc_destdir" \
722	  && $(MAKE) $(AM_MAKEFLAGS) dist \
723	  && rm -rf $(DIST_ARCHIVES) \
724	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
725	  && cd "$$am__cwd" \
726	  || exit 1
727	$(am__post_remove_distdir)
728	@(echo "$(distdir) archives ready for distribution: "; \
729	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
730	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
731distuninstallcheck:
732	@test -n '$(distuninstallcheck_dir)' || { \
733	  echo 'ERROR: trying to run $@ with an empty' \
734	       '$$(distuninstallcheck_dir)' >&2; \
735	  exit 1; \
736	}; \
737	$(am__cd) '$(distuninstallcheck_dir)' || { \
738	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
739	  exit 1; \
740	}; \
741	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
742	   || { echo "ERROR: files left after uninstall:" ; \
743	        if test -n "$(DESTDIR)"; then \
744	          echo "  (check DESTDIR support)"; \
745	        fi ; \
746	        $(distuninstallcheck_listfiles) ; \
747	        exit 1; } >&2
748distcleancheck: distclean
749	@if test '$(srcdir)' = . ; then \
750	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
751	  exit 1 ; \
752	fi
753	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
754	  || { echo "ERROR: files left in build directory after distclean:" ; \
755	       $(distcleancheck_listfiles) ; \
756	       exit 1; } >&2
757check-am: all-am
758check: check-recursive
759all-am: Makefile $(DATA) config.h
760installdirs: installdirs-recursive
761installdirs-am:
762	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
763	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
764	done
765install: install-recursive
766install-exec: install-exec-recursive
767install-data: install-data-recursive
768uninstall: uninstall-recursive
769
770install-am: all-am
771	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
772
773installcheck: installcheck-recursive
774install-strip:
775	if test -z '$(STRIP)'; then \
776	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
777	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
778	      install; \
779	else \
780	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
781	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
782	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
783	fi
784mostlyclean-generic:
785
786clean-generic:
787
788distclean-generic:
789	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
790	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
791
792maintainer-clean-generic:
793	@echo "This command is intended for maintainers to use"
794	@echo "it deletes files that may require special tools to rebuild."
795clean: clean-recursive
796
797clean-am: clean-generic clean-libtool mostlyclean-am
798
799distclean: distclean-recursive
800	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
801	-rm -f Makefile
802distclean-am: clean-am distclean-generic distclean-hdr \
803	distclean-libtool distclean-tags
804
805dvi: dvi-recursive
806
807dvi-am:
808
809html: html-recursive
810
811html-am:
812
813info: info-recursive
814
815info-am:
816
817install-data-am: install-pkgconfigDATA
818
819install-dvi: install-dvi-recursive
820
821install-dvi-am:
822
823install-exec-am:
824
825install-html: install-html-recursive
826
827install-html-am:
828
829install-info: install-info-recursive
830
831install-info-am:
832
833install-man:
834
835install-pdf: install-pdf-recursive
836
837install-pdf-am:
838
839install-ps: install-ps-recursive
840
841install-ps-am:
842
843installcheck-am:
844
845maintainer-clean: maintainer-clean-recursive
846	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
847	-rm -rf $(top_srcdir)/autom4te.cache
848	-rm -f Makefile
849maintainer-clean-am: distclean-am maintainer-clean-generic
850
851mostlyclean: mostlyclean-recursive
852
853mostlyclean-am: mostlyclean-generic mostlyclean-libtool
854
855pdf: pdf-recursive
856
857pdf-am:
858
859ps: ps-recursive
860
861ps-am:
862
863uninstall-am: uninstall-pkgconfigDATA
864
865.MAKE: $(am__recursive_targets) all install-am install-strip
866
867.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
868	am--refresh check check-am clean clean-cscope clean-generic \
869	clean-libtool cscope cscopelist-am ctags ctags-am dist \
870	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
871	dist-tarZ dist-xz dist-zip distcheck distclean \
872	distclean-generic distclean-hdr distclean-libtool \
873	distclean-tags distcleancheck distdir distuninstallcheck dvi \
874	dvi-am html html-am info info-am install install-am \
875	install-data install-data-am install-dvi install-dvi-am \
876	install-exec install-exec-am install-html install-html-am \
877	install-info install-info-am install-man install-pdf \
878	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
879	install-strip installcheck installcheck-am installdirs \
880	installdirs-am maintainer-clean maintainer-clean-generic \
881	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
882	ps ps-am tags tags-am uninstall uninstall-am \
883	uninstall-pkgconfigDATA
884
885.PRECIOUS: Makefile
886
887
888.PHONY: ChangeLog
889
890ChangeLog:
891	$(CHANGELOG_CMD)
892
893dist-hook: ChangeLog
894
895# Tell versions [3.59,3.63) of GNU make to not export all variables.
896# Otherwise a system limit (for SysV at least) may be exceeded.
897.NOEXPORT:
898