Makefile.in revision 54cef2dd 
1# Makefile.in generated by automake 1.16.5 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2021 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17#
18#  Copyright 2005  Red Hat, Inc.
19#
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Red Hat not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Red Hat makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29#
30#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38VPATH = @srcdir@
39am__is_gnu_make = { \
40  if test -z '$(MAKELEVEL)'; then \
41    false; \
42  elif test -n '$(MAKE_HOST)'; then \
43    true; \
44  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
45    true; \
46  else \
47    false; \
48  fi; \
49}
50am__make_running_with_option = \
51  case $${target_option-} in \
52      ?) ;; \
53      *) echo "am__make_running_with_option: internal error: invalid" \
54              "target option '$${target_option-}' specified" >&2; \
55         exit 1;; \
56  esac; \
57  has_opt=no; \
58  sane_makeflags=$$MAKEFLAGS; \
59  if $(am__is_gnu_make); then \
60    sane_makeflags=$$MFLAGS; \
61  else \
62    case $$MAKEFLAGS in \
63      *\\[\ \	]*) \
64        bs=\\; \
65        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
66          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
67    esac; \
68  fi; \
69  skip_next=no; \
70  strip_trailopt () \
71  { \
72    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
73  }; \
74  for flg in $$sane_makeflags; do \
75    test $$skip_next = yes && { skip_next=no; continue; }; \
76    case $$flg in \
77      *=*|--*) continue;; \
78        -*I) strip_trailopt 'I'; skip_next=yes;; \
79      -*I?*) strip_trailopt 'I';; \
80        -*O) strip_trailopt 'O'; skip_next=yes;; \
81      -*O?*) strip_trailopt 'O';; \
82        -*l) strip_trailopt 'l'; skip_next=yes;; \
83      -*l?*) strip_trailopt 'l';; \
84      -[dEDm]) skip_next=yes;; \
85      -[JT]) skip_next=yes;; \
86    esac; \
87    case $$flg in \
88      *$$target_option*) has_opt=yes; break;; \
89    esac; \
90  done; \
91  test $$has_opt = yes
92am__make_dryrun = (target_option=n; $(am__make_running_with_option))
93am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
94pkgdatadir = $(datadir)/@PACKAGE@
95pkgincludedir = $(includedir)/@PACKAGE@
96pkglibdir = $(libdir)/@PACKAGE@
97pkglibexecdir = $(libexecdir)/@PACKAGE@
98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
99install_sh_DATA = $(install_sh) -c -m 644
100install_sh_PROGRAM = $(install_sh) -c
101install_sh_SCRIPT = $(install_sh) -c
102INSTALL_HEADER = $(INSTALL_DATA)
103transform = $(program_transform_name)
104NORMAL_INSTALL = :
105PRE_INSTALL = :
106POST_INSTALL = :
107NORMAL_UNINSTALL = :
108PRE_UNINSTALL = :
109POST_UNINSTALL = :
110build_triplet = @build@
111host_triplet = @host@
112subdir = .
113ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
114am__aclocal_m4_deps = $(top_srcdir)/configure.ac
115am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
116	$(ACLOCAL_M4)
117DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
118	$(am__configure_deps) $(am__DIST_COMMON)
119am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
120 configure.lineno config.status.lineno
121mkinstalldirs = $(install_sh) -d
122CONFIG_HEADER = config.h
123CONFIG_CLEAN_FILES = xkbfile.pc
124CONFIG_CLEAN_VPATH_FILES =
125AM_V_P = $(am__v_P_@AM_V@)
126am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
127am__v_P_0 = false
128am__v_P_1 = :
129AM_V_GEN = $(am__v_GEN_@AM_V@)
130am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
131am__v_GEN_0 = @echo "  GEN     " $@;
132am__v_GEN_1 = 
133AM_V_at = $(am__v_at_@AM_V@)
134am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
135am__v_at_0 = @
136am__v_at_1 = 
137SOURCES =
138DIST_SOURCES =
139RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
140	ctags-recursive dvi-recursive html-recursive info-recursive \
141	install-data-recursive install-dvi-recursive \
142	install-exec-recursive install-html-recursive \
143	install-info-recursive install-pdf-recursive \
144	install-ps-recursive install-recursive installcheck-recursive \
145	installdirs-recursive pdf-recursive ps-recursive \
146	tags-recursive uninstall-recursive
147am__can_run_installinfo = \
148  case $$AM_UPDATE_INFO_DIR in \
149    n|no|NO) false;; \
150    *) (install-info --version) >/dev/null 2>&1;; \
151  esac
152am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
153am__vpath_adj = case $$p in \
154    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
155    *) f=$$p;; \
156  esac;
157am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
158am__install_max = 40
159am__nobase_strip_setup = \
160  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
161am__nobase_strip = \
162  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
163am__nobase_list = $(am__nobase_strip_setup); \
164  for p in $$list; do echo "$$p $$p"; done | \
165  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
166  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
167    if (++n[$$2] == $(am__install_max)) \
168      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
169    END { for (dir in files) print dir, files[dir] }'
170am__base_list = \
171  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
172  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
173am__uninstall_files_from_dir = { \
174  test -z "$$files" \
175    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
176    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
177         $(am__cd) "$$dir" && rm -f $$files; }; \
178  }
179am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
180DATA = $(pkgconfig_DATA)
181RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
182  distclean-recursive maintainer-clean-recursive
183am__recursive_targets = \
184  $(RECURSIVE_TARGETS) \
185  $(RECURSIVE_CLEAN_TARGETS) \
186  $(am__extra_recursive_targets)
187AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
188	cscope distdir distdir-am dist dist-all distcheck
189am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
190	config.h.in
191# Read a list of newline-separated strings from the standard input,
192# and print each of them once, without duplicates.  Input order is
193# *not* preserved.
194am__uniquify_input = $(AWK) '\
195  BEGIN { nonempty = 0; } \
196  { items[$$0] = 1; nonempty = 1; } \
197  END { if (nonempty) { for (i in items) print i; }; } \
198'
199# Make sure the list of sources is unique.  This is necessary because,
200# e.g., the same source file might be shared among _SOURCES variables
201# for different programs/libraries.
202am__define_uniq_tagged_files = \
203  list='$(am__tagged_files)'; \
204  unique=`for i in $$list; do \
205    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
206  done | $(am__uniquify_input)`
207DIST_SUBDIRS = $(SUBDIRS)
208am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
209	$(srcdir)/xkbfile.pc.in COPYING ChangeLog INSTALL README.md \
210	compile config.guess config.sub install-sh ltmain.sh missing
211DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
212distdir = $(PACKAGE)-$(VERSION)
213top_distdir = $(distdir)
214am__remove_distdir = \
215  if test -d "$(distdir)"; then \
216    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
217      && rm -rf "$(distdir)" \
218      || { sleep 5 && rm -rf "$(distdir)"; }; \
219  else :; fi
220am__post_remove_distdir = $(am__remove_distdir)
221am__relativize = \
222  dir0=`pwd`; \
223  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
224  sed_rest='s,^[^/]*/*,,'; \
225  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
226  sed_butlast='s,/*[^/]*$$,,'; \
227  while test -n "$$dir1"; do \
228    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
229    if test "$$first" != "."; then \
230      if test "$$first" = ".."; then \
231        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
232        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
233      else \
234        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
235        if test "$$first2" = "$$first"; then \
236          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
237        else \
238          dir2="../$$dir2"; \
239        fi; \
240        dir0="$$dir0"/"$$first"; \
241      fi; \
242    fi; \
243    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
244  done; \
245  reldir="$$dir2"
246DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
247GZIP_ENV = --best
248DIST_TARGETS = dist-xz dist-gzip
249# Exists only to be overridden by the user if desired.
250AM_DISTCHECK_DVI_TARGET = dvi
251distuninstallcheck_listfiles = find . -type f -print
252am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
253  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
254distcleancheck_listfiles = find . -type f -print
255ACLOCAL = @ACLOCAL@
256ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
257ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
258AMTAR = @AMTAR@
259AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
260APP_MAN_DIR = @APP_MAN_DIR@
261APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
262AR = @AR@
263AUTOCONF = @AUTOCONF@
264AUTOHEADER = @AUTOHEADER@
265AUTOMAKE = @AUTOMAKE@
266AWK = @AWK@
267BASE_CFLAGS = @BASE_CFLAGS@
268CC = @CC@
269CCDEPMODE = @CCDEPMODE@
270CFLAGS = @CFLAGS@
271CHANGELOG_CMD = @CHANGELOG_CMD@
272CPPFLAGS = @CPPFLAGS@
273CSCOPE = @CSCOPE@
274CTAGS = @CTAGS@
275CWARNFLAGS = @CWARNFLAGS@
276CYGPATH_W = @CYGPATH_W@
277DEFS = @DEFS@
278DEPDIR = @DEPDIR@
279DLLTOOL = @DLLTOOL@
280DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
281DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
282DSYMUTIL = @DSYMUTIL@
283DUMPBIN = @DUMPBIN@
284ECHO_C = @ECHO_C@
285ECHO_N = @ECHO_N@
286ECHO_T = @ECHO_T@
287EGREP = @EGREP@
288ETAGS = @ETAGS@
289EXEEXT = @EXEEXT@
290FGREP = @FGREP@
291FILECMD = @FILECMD@
292FILE_MAN_DIR = @FILE_MAN_DIR@
293FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
294GREP = @GREP@
295INSTALL = @INSTALL@
296INSTALL_CMD = @INSTALL_CMD@
297INSTALL_DATA = @INSTALL_DATA@
298INSTALL_PROGRAM = @INSTALL_PROGRAM@
299INSTALL_SCRIPT = @INSTALL_SCRIPT@
300INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
301LD = @LD@
302LDFLAGS = @LDFLAGS@
303LIBOBJS = @LIBOBJS@
304LIBS = @LIBS@
305LIBTOOL = @LIBTOOL@
306LIB_MAN_DIR = @LIB_MAN_DIR@
307LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
308LIPO = @LIPO@
309LN_S = @LN_S@
310LTLIBOBJS = @LTLIBOBJS@
311LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
312MAKEINFO = @MAKEINFO@
313MANIFEST_TOOL = @MANIFEST_TOOL@
314MAN_SUBSTS = @MAN_SUBSTS@
315MISC_MAN_DIR = @MISC_MAN_DIR@
316MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
317MKDIR_P = @MKDIR_P@
318NM = @NM@
319NMEDIT = @NMEDIT@
320OBJDUMP = @OBJDUMP@
321OBJEXT = @OBJEXT@
322OTOOL = @OTOOL@
323OTOOL64 = @OTOOL64@
324PACKAGE = @PACKAGE@
325PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
326PACKAGE_NAME = @PACKAGE_NAME@
327PACKAGE_STRING = @PACKAGE_STRING@
328PACKAGE_TARNAME = @PACKAGE_TARNAME@
329PACKAGE_URL = @PACKAGE_URL@
330PACKAGE_VERSION = @PACKAGE_VERSION@
331PATH_SEPARATOR = @PATH_SEPARATOR@
332PKG_CONFIG = @PKG_CONFIG@
333PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
334PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
335RANLIB = @RANLIB@
336SED = @SED@
337SET_MAKE = @SET_MAKE@
338SHELL = @SHELL@
339STRICT_CFLAGS = @STRICT_CFLAGS@
340STRIP = @STRIP@
341VERSION = @VERSION@
342XKBFILE_CFLAGS = @XKBFILE_CFLAGS@
343XKBFILE_LIBS = @XKBFILE_LIBS@
344XORG_MAN_PAGE = @XORG_MAN_PAGE@
345abs_builddir = @abs_builddir@
346abs_srcdir = @abs_srcdir@
347abs_top_builddir = @abs_top_builddir@
348abs_top_srcdir = @abs_top_srcdir@
349ac_ct_AR = @ac_ct_AR@
350ac_ct_CC = @ac_ct_CC@
351ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
352am__include = @am__include@
353am__leading_dot = @am__leading_dot@
354am__quote = @am__quote@
355am__tar = @am__tar@
356am__untar = @am__untar@
357bindir = @bindir@
358build = @build@
359build_alias = @build_alias@
360build_cpu = @build_cpu@
361build_os = @build_os@
362build_vendor = @build_vendor@
363builddir = @builddir@
364datadir = @datadir@
365datarootdir = @datarootdir@
366docdir = @docdir@
367dvidir = @dvidir@
368exec_prefix = @exec_prefix@
369host = @host@
370host_alias = @host_alias@
371host_cpu = @host_cpu@
372host_os = @host_os@
373host_vendor = @host_vendor@
374htmldir = @htmldir@
375includedir = @includedir@
376infodir = @infodir@
377install_sh = @install_sh@
378libdir = @libdir@
379libexecdir = @libexecdir@
380localedir = @localedir@
381localstatedir = @localstatedir@
382mandir = @mandir@
383mkdir_p = @mkdir_p@
384oldincludedir = @oldincludedir@
385pdfdir = @pdfdir@
386prefix = @prefix@
387program_transform_name = @program_transform_name@
388psdir = @psdir@
389runstatedir = @runstatedir@
390sbindir = @sbindir@
391sharedstatedir = @sharedstatedir@
392srcdir = @srcdir@
393sysconfdir = @sysconfdir@
394target_alias = @target_alias@
395top_build_prefix = @top_build_prefix@
396top_builddir = @top_builddir@
397top_srcdir = @top_srcdir@
398SUBDIRS = src
399pkgconfigdir = $(libdir)/pkgconfig
400pkgconfig_DATA = xkbfile.pc
401MAINTAINERCLEANFILES = ChangeLog INSTALL
402EXTRA_DIST = README.md
403all: config.h
404	$(MAKE) $(AM_MAKEFLAGS) all-recursive
405
406.SUFFIXES:
407am--refresh: Makefile
408	@:
409$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
410	@for dep in $?; do \
411	  case '$(am__configure_deps)' in \
412	    *$$dep*) \
413	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
414	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
415		&& exit 0; \
416	      exit 1;; \
417	  esac; \
418	done; \
419	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
420	$(am__cd) $(top_srcdir) && \
421	  $(AUTOMAKE) --foreign Makefile
422Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
423	@case '$?' in \
424	  *config.status*) \
425	    echo ' $(SHELL) ./config.status'; \
426	    $(SHELL) ./config.status;; \
427	  *) \
428	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
429	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
430	esac;
431
432$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
433	$(SHELL) ./config.status --recheck
434
435$(top_srcdir)/configure:  $(am__configure_deps)
436	$(am__cd) $(srcdir) && $(AUTOCONF)
437$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
438	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
439$(am__aclocal_m4_deps):
440
441config.h: stamp-h1
442	@test -f $@ || rm -f stamp-h1
443	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
444
445stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
446	@rm -f stamp-h1
447	cd $(top_builddir) && $(SHELL) ./config.status config.h
448$(srcdir)/config.h.in:  $(am__configure_deps) 
449	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
450	rm -f stamp-h1
451	touch $@
452
453distclean-hdr:
454	-rm -f config.h stamp-h1
455xkbfile.pc: $(top_builddir)/config.status $(srcdir)/xkbfile.pc.in
456	cd $(top_builddir) && $(SHELL) ./config.status $@
457
458mostlyclean-libtool:
459	-rm -f *.lo
460
461clean-libtool:
462	-rm -rf .libs _libs
463
464distclean-libtool:
465	-rm -f libtool config.lt
466install-pkgconfigDATA: $(pkgconfig_DATA)
467	@$(NORMAL_INSTALL)
468	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
469	if test -n "$$list"; then \
470	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
471	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
472	fi; \
473	for p in $$list; do \
474	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
475	  echo "$$d$$p"; \
476	done | $(am__base_list) | \
477	while read files; do \
478	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
479	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
480	done
481
482uninstall-pkgconfigDATA:
483	@$(NORMAL_UNINSTALL)
484	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
485	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
486	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
487
488# This directory's subdirectories are mostly independent; you can cd
489# into them and run 'make' without going through this Makefile.
490# To change the values of 'make' variables: instead of editing Makefiles,
491# (1) if the variable is set in 'config.status', edit 'config.status'
492#     (which will cause the Makefiles to be regenerated when you run 'make');
493# (2) otherwise, pass the desired values on the 'make' command line.
494$(am__recursive_targets):
495	@fail=; \
496	if $(am__make_keepgoing); then \
497	  failcom='fail=yes'; \
498	else \
499	  failcom='exit 1'; \
500	fi; \
501	dot_seen=no; \
502	target=`echo $@ | sed s/-recursive//`; \
503	case "$@" in \
504	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
505	  *) list='$(SUBDIRS)' ;; \
506	esac; \
507	for subdir in $$list; do \
508	  echo "Making $$target in $$subdir"; \
509	  if test "$$subdir" = "."; then \
510	    dot_seen=yes; \
511	    local_target="$$target-am"; \
512	  else \
513	    local_target="$$target"; \
514	  fi; \
515	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
516	  || eval $$failcom; \
517	done; \
518	if test "$$dot_seen" = "no"; then \
519	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
520	fi; test -z "$$fail"
521
522ID: $(am__tagged_files)
523	$(am__define_uniq_tagged_files); mkid -fID $$unique
524tags: tags-recursive
525TAGS: tags
526
527tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
528	set x; \
529	here=`pwd`; \
530	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
531	  include_option=--etags-include; \
532	  empty_fix=.; \
533	else \
534	  include_option=--include; \
535	  empty_fix=; \
536	fi; \
537	list='$(SUBDIRS)'; for subdir in $$list; do \
538	  if test "$$subdir" = .; then :; else \
539	    test ! -f $$subdir/TAGS || \
540	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
541	  fi; \
542	done; \
543	$(am__define_uniq_tagged_files); \
544	shift; \
545	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
546	  test -n "$$unique" || unique=$$empty_fix; \
547	  if test $$# -gt 0; then \
548	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
549	      "$$@" $$unique; \
550	  else \
551	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
552	      $$unique; \
553	  fi; \
554	fi
555ctags: ctags-recursive
556
557CTAGS: ctags
558ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
559	$(am__define_uniq_tagged_files); \
560	test -z "$(CTAGS_ARGS)$$unique" \
561	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
562	     $$unique
563
564GTAGS:
565	here=`$(am__cd) $(top_builddir) && pwd` \
566	  && $(am__cd) $(top_srcdir) \
567	  && gtags -i $(GTAGS_ARGS) "$$here"
568cscope: cscope.files
569	test ! -s cscope.files \
570	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
571clean-cscope:
572	-rm -f cscope.files
573cscope.files: clean-cscope cscopelist
574cscopelist: cscopelist-recursive
575
576cscopelist-am: $(am__tagged_files)
577	list='$(am__tagged_files)'; \
578	case "$(srcdir)" in \
579	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
580	  *) sdir=$(subdir)/$(srcdir) ;; \
581	esac; \
582	for i in $$list; do \
583	  if test -f "$$i"; then \
584	    echo "$(subdir)/$$i"; \
585	  else \
586	    echo "$$sdir/$$i"; \
587	  fi; \
588	done >> $(top_builddir)/cscope.files
589
590distclean-tags:
591	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
592	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
593distdir: $(BUILT_SOURCES)
594	$(MAKE) $(AM_MAKEFLAGS) distdir-am
595
596distdir-am: $(DISTFILES)
597	$(am__remove_distdir)
598	test -d "$(distdir)" || mkdir "$(distdir)"
599	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
600	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
601	list='$(DISTFILES)'; \
602	  dist_files=`for file in $$list; do echo $$file; done | \
603	  sed -e "s|^$$srcdirstrip/||;t" \
604	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
605	case $$dist_files in \
606	  */*) $(MKDIR_P) `echo "$$dist_files" | \
607			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
608			   sort -u` ;; \
609	esac; \
610	for file in $$dist_files; do \
611	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
612	  if test -d $$d/$$file; then \
613	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
614	    if test -d "$(distdir)/$$file"; then \
615	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
616	    fi; \
617	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
618	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
619	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
620	    fi; \
621	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
622	  else \
623	    test -f "$(distdir)/$$file" \
624	    || cp -p $$d/$$file "$(distdir)/$$file" \
625	    || exit 1; \
626	  fi; \
627	done
628	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
629	  if test "$$subdir" = .; then :; else \
630	    $(am__make_dryrun) \
631	      || test -d "$(distdir)/$$subdir" \
632	      || $(MKDIR_P) "$(distdir)/$$subdir" \
633	      || exit 1; \
634	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
635	    $(am__relativize); \
636	    new_distdir=$$reldir; \
637	    dir1=$$subdir; dir2="$(top_distdir)"; \
638	    $(am__relativize); \
639	    new_top_distdir=$$reldir; \
640	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
641	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
642	    ($(am__cd) $$subdir && \
643	      $(MAKE) $(AM_MAKEFLAGS) \
644	        top_distdir="$$new_top_distdir" \
645	        distdir="$$new_distdir" \
646		am__remove_distdir=: \
647		am__skip_length_check=: \
648		am__skip_mode_fix=: \
649	        distdir) \
650	      || exit 1; \
651	  fi; \
652	done
653	$(MAKE) $(AM_MAKEFLAGS) \
654	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
655	  dist-hook
656	-test -n "$(am__skip_mode_fix)" \
657	|| find "$(distdir)" -type d ! -perm -755 \
658		-exec chmod u+rwx,go+rx {} \; -o \
659	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
660	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
661	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
662	|| chmod -R a+r "$(distdir)"
663dist-gzip: distdir
664	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
665	$(am__post_remove_distdir)
666
667dist-bzip2: distdir
668	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
669	$(am__post_remove_distdir)
670
671dist-lzip: distdir
672	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
673	$(am__post_remove_distdir)
674dist-xz: distdir
675	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
676	$(am__post_remove_distdir)
677
678dist-zstd: distdir
679	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
680	$(am__post_remove_distdir)
681
682dist-tarZ: distdir
683	@echo WARNING: "Support for distribution archives compressed with" \
684		       "legacy program 'compress' is deprecated." >&2
685	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
686	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
687	$(am__post_remove_distdir)
688
689dist-shar: distdir
690	@echo WARNING: "Support for shar distribution archives is" \
691	               "deprecated." >&2
692	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
693	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
694	$(am__post_remove_distdir)
695
696dist-zip: distdir
697	-rm -f $(distdir).zip
698	zip -rq $(distdir).zip $(distdir)
699	$(am__post_remove_distdir)
700
701dist dist-all:
702	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
703	$(am__post_remove_distdir)
704
705# This target untars the dist file and tries a VPATH configuration.  Then
706# it guarantees that the distribution is self-contained by making another
707# tarfile.
708distcheck: dist
709	case '$(DIST_ARCHIVES)' in \
710	*.tar.gz*) \
711	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
712	*.tar.bz2*) \
713	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
714	*.tar.lz*) \
715	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
716	*.tar.xz*) \
717	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
718	*.tar.Z*) \
719	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
720	*.shar.gz*) \
721	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
722	*.zip*) \
723	  unzip $(distdir).zip ;;\
724	*.tar.zst*) \
725	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
726	esac
727	chmod -R a-w $(distdir)
728	chmod u+w $(distdir)
729	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
730	chmod a-w $(distdir)
731	test -d $(distdir)/_build || exit 0; \
732	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
733	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
734	  && am__cwd=`pwd` \
735	  && $(am__cd) $(distdir)/_build/sub \
736	  && ../../configure \
737	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
738	    $(DISTCHECK_CONFIGURE_FLAGS) \
739	    --srcdir=../.. --prefix="$$dc_install_base" \
740	  && $(MAKE) $(AM_MAKEFLAGS) \
741	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
742	  && $(MAKE) $(AM_MAKEFLAGS) check \
743	  && $(MAKE) $(AM_MAKEFLAGS) install \
744	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
745	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
746	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
747	        distuninstallcheck \
748	  && chmod -R a-w "$$dc_install_base" \
749	  && ({ \
750	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
751	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
752	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
753	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
754	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
755	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
756	  && rm -rf "$$dc_destdir" \
757	  && $(MAKE) $(AM_MAKEFLAGS) dist \
758	  && rm -rf $(DIST_ARCHIVES) \
759	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
760	  && cd "$$am__cwd" \
761	  || exit 1
762	$(am__post_remove_distdir)
763	@(echo "$(distdir) archives ready for distribution: "; \
764	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
765	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
766distuninstallcheck:
767	@test -n '$(distuninstallcheck_dir)' || { \
768	  echo 'ERROR: trying to run $@ with an empty' \
769	       '$$(distuninstallcheck_dir)' >&2; \
770	  exit 1; \
771	}; \
772	$(am__cd) '$(distuninstallcheck_dir)' || { \
773	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
774	  exit 1; \
775	}; \
776	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
777	   || { echo "ERROR: files left after uninstall:" ; \
778	        if test -n "$(DESTDIR)"; then \
779	          echo "  (check DESTDIR support)"; \
780	        fi ; \
781	        $(distuninstallcheck_listfiles) ; \
782	        exit 1; } >&2
783distcleancheck: distclean
784	@if test '$(srcdir)' = . ; then \
785	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
786	  exit 1 ; \
787	fi
788	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
789	  || { echo "ERROR: files left in build directory after distclean:" ; \
790	       $(distcleancheck_listfiles) ; \
791	       exit 1; } >&2
792check-am: all-am
793check: check-recursive
794all-am: Makefile $(DATA) config.h
795installdirs: installdirs-recursive
796installdirs-am:
797	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
798	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
799	done
800install: install-recursive
801install-exec: install-exec-recursive
802install-data: install-data-recursive
803uninstall: uninstall-recursive
804
805install-am: all-am
806	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
807
808installcheck: installcheck-recursive
809install-strip:
810	if test -z '$(STRIP)'; then \
811	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
812	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
813	      install; \
814	else \
815	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
816	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
817	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
818	fi
819mostlyclean-generic:
820
821clean-generic:
822
823distclean-generic:
824	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
825	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
826
827maintainer-clean-generic:
828	@echo "This command is intended for maintainers to use"
829	@echo "it deletes files that may require special tools to rebuild."
830	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
831clean: clean-recursive
832
833clean-am: clean-generic clean-libtool mostlyclean-am
834
835distclean: distclean-recursive
836	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
837	-rm -f Makefile
838distclean-am: clean-am distclean-generic distclean-hdr \
839	distclean-libtool distclean-tags
840
841dvi: dvi-recursive
842
843dvi-am:
844
845html: html-recursive
846
847html-am:
848
849info: info-recursive
850
851info-am:
852
853install-data-am: install-pkgconfigDATA
854
855install-dvi: install-dvi-recursive
856
857install-dvi-am:
858
859install-exec-am:
860
861install-html: install-html-recursive
862
863install-html-am:
864
865install-info: install-info-recursive
866
867install-info-am:
868
869install-man:
870
871install-pdf: install-pdf-recursive
872
873install-pdf-am:
874
875install-ps: install-ps-recursive
876
877install-ps-am:
878
879installcheck-am:
880
881maintainer-clean: maintainer-clean-recursive
882	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
883	-rm -rf $(top_srcdir)/autom4te.cache
884	-rm -f Makefile
885maintainer-clean-am: distclean-am maintainer-clean-generic
886
887mostlyclean: mostlyclean-recursive
888
889mostlyclean-am: mostlyclean-generic mostlyclean-libtool
890
891pdf: pdf-recursive
892
893pdf-am:
894
895ps: ps-recursive
896
897ps-am:
898
899uninstall-am: uninstall-pkgconfigDATA
900
901.MAKE: $(am__recursive_targets) all install-am install-strip
902
903.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
904	am--refresh check check-am clean clean-cscope clean-generic \
905	clean-libtool cscope cscopelist-am ctags ctags-am dist \
906	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
907	dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \
908	distclean-generic distclean-hdr distclean-libtool \
909	distclean-tags distcleancheck distdir distuninstallcheck dvi \
910	dvi-am html html-am info info-am install install-am \
911	install-data install-data-am install-dvi install-dvi-am \
912	install-exec install-exec-am install-html install-html-am \
913	install-info install-info-am install-man install-pdf \
914	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
915	install-strip installcheck installcheck-am installdirs \
916	installdirs-am maintainer-clean maintainer-clean-generic \
917	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
918	ps ps-am tags tags-am uninstall uninstall-am \
919	uninstall-pkgconfigDATA
920
921.PRECIOUS: Makefile
922
923
924.PHONY: ChangeLog INSTALL
925
926INSTALL:
927	$(INSTALL_CMD)
928
929ChangeLog:
930	$(CHANGELOG_CMD)
931
932dist-hook: ChangeLog INSTALL
933
934# Tell versions [3.59,3.63) of GNU make to not export all variables.
935# Otherwise a system limit (for SysV at least) may be exceeded.
936.NOEXPORT:
937