xref: /xsrc/external/mit/libxkbfile/dist/aclocal.m4

# generated automatically by aclocal 1.16.5 -*- Autoconf -*-

# Copyright (C) 1996-2021 Free Software Foundation, Inc.

# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
m4_ifndef([AC_AUTOCONF_VERSION],
  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.71],,
[m4_warning([this file was generated for autoconf 2.71.
You have another version of autoconf.  It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.])])

# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
#   Copyright (C) 1996-2001, 2003-2019, 2021-2022 Free Software
#   Foundation, Inc.
#   Written by Gordon Matzigkeit, 1996
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.

m4_define([_LT_COPYING], [dnl
# Copyright (C) 2014 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions.  There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of of the License, or
# (at your option) any later version.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program or library that is built
# using GNU Libtool, you may include this file under the  same
# distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
])

# serial 59 LT_INIT


# LT_PREREQ(VERSION)
# ------------------
# Complain and exit if this libtool version is less that VERSION.
m4_defun([LT_PREREQ],
[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
       [m4_default([$3],
		   [m4_fatal([Libtool version $1 or higher is required],
		             63)])],
       [$2])])


# _LT_CHECK_BUILDDIR
# ------------------
# Complain if the absolute build directory name contains unusual characters
m4_defun([_LT_CHECK_BUILDDIR],
[case `pwd` in
  *\ * | *\	*)
    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
esac
])


# LT_INIT([OPTIONS])
# ------------------
AC_DEFUN([LT_INIT],
[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
AC_BEFORE([$0], [LTDL_INIT])dnl
m4_require([_LT_CHECK_BUILDDIR])dnl

dnl Autoconf doesn't catch unexpanded LT_ macros by default:
m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
dnl unless we require an AC_DEFUNed macro:
AC_REQUIRE([LTOPTIONS_VERSION])dnl
AC_REQUIRE([LTSUGAR_VERSION])dnl
AC_REQUIRE([LTVERSION_VERSION])dnl
AC_REQUIRE([LTOBSOLETE_VERSION])dnl
m4_require([_LT_PROG_LTMAIN])dnl

_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])

dnl Parse OPTIONS
_LT_SET_OPTIONS([$0], [$1])

# This can be used to rebuild libtool when needed
LIBTOOL_DEPS=$ltmain

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl

_LT_SETUP

# Only expand once:
m4_define([LT_INIT])
])# LT_INIT

# Old names:
AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
dnl AC_DEFUN([AM_PROG_LIBTOOL], [])


# _LT_PREPARE_CC_BASENAME
# -----------------------
m4_defun([_LT_PREPARE_CC_BASENAME], [
# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
func_cc_basename ()
{
    for cc_temp in @S|@*""; do
      case $cc_temp in
        compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
        distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
        \-*) ;;
        *) break;;
      esac
    done
    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
}
])# _LT_PREPARE_CC_BASENAME


# _LT_CC_BASENAME(CC)
# -------------------
# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
# but that macro is also expanded into generated libtool script, which
# arranges for $SED and $ECHO to be set by different means.
m4_defun([_LT_CC_BASENAME],
[m4_require([_LT_PREPARE_CC_BASENAME])dnl
AC_REQUIRE([_LT_DECL_SED])dnl
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
func_cc_basename $1
cc_basename=$func_cc_basename_result
])


# _LT_FILEUTILS_DEFAULTS
# ----------------------
# It is okay to use these file commands and assume they have been set
# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
m4_defun([_LT_FILEUTILS_DEFAULTS],
[: ${CP="cp -f"}
: ${MV="mv -f"}
: ${RM="rm -f"}
])# _LT_FILEUTILS_DEFAULTS


# _LT_SETUP
# ---------
m4_defun([_LT_SETUP],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl

_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
dnl
_LT_DECL([], [host_alias], [0], [The host system])dnl
_LT_DECL([], [host], [0])dnl
_LT_DECL([], [host_os], [0])dnl
dnl
_LT_DECL([], [build_alias], [0], [The build system])dnl
_LT_DECL([], [build], [0])dnl
_LT_DECL([], [build_os], [0])dnl
dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([LT_PATH_LD])dnl
AC_REQUIRE([LT_PATH_NM])dnl
dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
test -z "$LN_S" && LN_S="ln -s"
_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
dnl
AC_REQUIRE([LT_CMD_MAX_LEN])dnl
_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
m4_require([_LT_CMD_RELOAD])dnl
m4_require([_LT_DECL_FILECMD])dnl
m4_require([_LT_CHECK_MAGIC_METHOD])dnl
m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
m4_require([_LT_CMD_OLD_ARCHIVE])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_WITH_SYSROOT])dnl
m4_require([_LT_CMD_TRUNCATE])dnl

_LT_CONFIG_LIBTOOL_INIT([
# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
if test -n "\${ZSH_VERSION+set}"; then
   setopt NO_GLOB_SUBST
fi
])
if test -n "${ZSH_VERSION+set}"; then
   setopt NO_GLOB_SUBST
fi

_LT_CHECK_OBJDIR

m4_require([_LT_TAG_COMPILER])dnl

case $host_os in
aix3*)
  # AIX sometimes has problems with the GCC collect2 program.  For some
  # reason, if we set the COLLECT_NAMES environment variable, the problems
  # vanish in a puff of smoke.
  if test set != "${COLLECT_NAMES+set}"; then
    COLLECT_NAMES=
    export COLLECT_NAMES
  fi
  ;;
esac

# Global variables:
ofile=libtool
can_build_shared=yes

# All known linkers require a '.a' archive for static linking (except MSVC and
# ICC, which need '.lib').
libext=a

with_gnu_ld=$lt_cv_prog_gnu_ld

old_CC=$CC
old_CFLAGS=$CFLAGS

# Set sane defaults for various variables
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o

_LT_CC_BASENAME([$compiler])

# Only perform the check for file, if the check method requires it
test -z "$MAGIC_CMD" && MAGIC_CMD=file
case $deplibs_check_method in
file_magic*)
  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
    _LT_PATH_MAGIC
  fi
  ;;
esac

# Use C for the default configuration in the libtool script
LT_SUPPORTED_TAG([CC])
_LT_LANG_C_CONFIG
_LT_LANG_DEFAULT_CONFIG
_LT_CONFIG_COMMANDS
])# _LT_SETUP


# _LT_PREPARE_SED_QUOTE_VARS
# --------------------------
# Define a few sed substitution that help us do robust quoting.
m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
[# Backslashify metacharacters that are still active within
# double-quoted strings.
sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'

# Same as above, but do not quote variable references.
double_quote_subst='s/\([["`\\]]\)/\\\1/g'

# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

# Sed substitution to delay expansion of an escaped single quote.
delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'

# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'
])

# _LT_PROG_LTMAIN
# ---------------
# Note that this code is called both from 'configure', and 'config.status'
# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
# 'config.status' has no value for ac_aux_dir unless we are using Automake,
# so we pass a copy along to make sure it has a sensible value anyway.
m4_defun([_LT_PROG_LTMAIN],
[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
ltmain=$ac_aux_dir/ltmain.sh
])# _LT_PROG_LTMAIN



# So that we can recreate a full libtool script including additional
# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
# in macros and then make a single call at the end using the 'libtool'
# label.


# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
# ----------------------------------------
# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
m4_define([_LT_CONFIG_LIBTOOL_INIT],
[m4_ifval([$1],
          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
                     [$1
])])])

# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_INIT])


# _LT_CONFIG_LIBTOOL([COMMANDS])
# ------------------------------
# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
m4_define([_LT_CONFIG_LIBTOOL],
[m4_ifval([$1],
          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
                     [$1
])])])

# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])


# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
# -----------------------------------------------------
m4_defun([_LT_CONFIG_SAVE_COMMANDS],
[_LT_CONFIG_LIBTOOL([$1])
_LT_CONFIG_LIBTOOL_INIT([$2])
])


# _LT_FORMAT_COMMENT([COMMENT])
# -----------------------------
# Add leading comment marks to the start of each line, and a trailing
# full-stop to the whole comment if one is not present already.
m4_define([_LT_FORMAT_COMMENT],
[m4_ifval([$1], [
m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
)])





# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
# -------------------------------------------------------------------
# CONFIGNAME is the name given to the value in the libtool script.
# VARNAME is the (base) name used in the configure script.
# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
# VARNAME.  Any other value will be used directly.
m4_define([_LT_DECL],
[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
	[m4_ifval([$1], [$1], [$2])])
    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
    m4_ifval([$4],
	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
    lt_dict_add_subkey([lt_decl_dict], [$2],
	[tagged?], [m4_ifval([$5], [yes], [no])])])
])


# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
# --------------------------------------------------------
m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])


# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
# ------------------------------------------------
m4_define([lt_decl_tag_varnames],
[_lt_decl_filter([tagged?], [yes], $@)])


# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
# ---------------------------------------------------------
m4_define([_lt_decl_filter],
[m4_case([$#],
  [0], [m4_fatal([$0: too few arguments: $#])],
  [1], [m4_fatal([$0: too few arguments: $#: $1])],
  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
])


# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
# --------------------------------------------------
m4_define([lt_decl_quote_varnames],
[_lt_decl_filter([value], [1], $@)])


# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
# ---------------------------------------------------
m4_define([lt_decl_dquote_varnames],
[_lt_decl_filter([value], [2], $@)])


# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
# ---------------------------------------------------
m4_define([lt_decl_varnames_tagged],
[m4_assert([$# <= 2])dnl
_$0(m4_quote(m4_default([$1], [[, ]])),
    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
m4_define([_lt_decl_varnames_tagged],
[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])


# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
# ------------------------------------------------
m4_define([lt_decl_all_varnames],
[_$0(m4_quote(m4_default([$1], [[, ]])),
     m4_if([$2], [],
	   m4_quote(lt_decl_varnames),
	m4_quote(m4_shift($@))))[]dnl
])
m4_define([_lt_decl_all_varnames],
[lt_join($@, lt_decl_varnames_tagged([$1],
			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
])


# _LT_CONFIG_STATUS_DECLARE([VARNAME])
# ------------------------------------
# Quote a variable value, and forward it to 'config.status' so that its
# declaration there will have the same value as in 'configure'.  VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])


# _LT_CONFIG_STATUS_DECLARATIONS
# ------------------------------
# We delimit libtool config variables with single quotes, so when
# we write them to config.status, we have to be sure to quote all
# embedded single quotes properly.  In configure, this macro expands
# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
#
#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])


# _LT_LIBTOOL_TAGS
# ----------------
# Output comment and list of tags supported by the script
m4_defun([_LT_LIBTOOL_TAGS],
[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
available_tags='_LT_TAGS'dnl
])


# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
# -----------------------------------
# Extract the dictionary values for VARNAME (optionally with TAG) and
# expand to a commented shell variable setting:
#
#    # Some comment about what VAR is for.
#    visible_name=$lt_internal_name
m4_define([_LT_LIBTOOL_DECLARE],
[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
					   [description])))[]dnl
m4_pushdef([_libtool_name],
    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
    [0], [_libtool_name=[$]$1],
    [1], [_libtool_name=$lt_[]$1],
    [2], [_libtool_name=$lt_[]$1],
    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
])


# _LT_LIBTOOL_CONFIG_VARS
# -----------------------
# Produce commented declarations of non-tagged libtool config variables
# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
# section) are produced by _LT_LIBTOOL_TAG_VARS.
m4_defun([_LT_LIBTOOL_CONFIG_VARS],
[m4_foreach([_lt_var],
    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])


# _LT_LIBTOOL_TAG_VARS(TAG)
# -------------------------
m4_define([_LT_LIBTOOL_TAG_VARS],
[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])


# _LT_TAGVAR(VARNAME, [TAGNAME])
# ------------------------------
m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])


# _LT_CONFIG_COMMANDS
# -------------------
# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
# variables for single and double quote escaping we saved from calls
# to _LT_DECL, we can put quote escaped variables declarations
# into 'config.status', and then the shell code to quote escape them in
# for loops in 'config.status'.  Finally, any additional code accumulated
# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
m4_defun([_LT_CONFIG_COMMANDS],
[AC_PROVIDE_IFELSE([LT_OUTPUT],
	dnl If the libtool generation code has been placed in $CONFIG_LT,
	dnl instead of duplicating it all over again into config.status,
	dnl then we will have config.status run $CONFIG_LT later, so it
	dnl needs to know what name is stored there:
        [AC_CONFIG_COMMANDS([libtool],
            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
    dnl If the libtool generation code is destined for config.status,
    dnl expand the accumulated commands and init code now:
    [AC_CONFIG_COMMANDS([libtool],
        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
])#_LT_CONFIG_COMMANDS


# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
[

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

sed_quote_subst='$sed_quote_subst'
double_quote_subst='$double_quote_subst'
delay_variable_subst='$delay_variable_subst'
_LT_CONFIG_STATUS_DECLARATIONS
LTCC='$LTCC'
LTCFLAGS='$LTCFLAGS'
compiler='$compiler_DEFAULT'

# A function that is used when there is no print builtin or printf.
func_fallback_echo ()
{
  eval 'cat <<_LTECHO_EOF
\$[]1
_LTECHO_EOF'
}

# Quote evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_quote_varnames); do
    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
    *[[\\\\\\\`\\"\\\$]]*)
      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
      ;;
    *)
      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
      ;;
    esac
done

# Double-quote double-evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_dquote_varnames); do
    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
    *[[\\\\\\\`\\"\\\$]]*)
      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
      ;;
    *)
      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
      ;;
    esac
done

_LT_OUTPUT_LIBTOOL_INIT
])

# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
# ------------------------------------
# Generate a child script FILE with all initialization necessary to
# reuse the environment learned by the parent script, and make the
# file executable.  If COMMENT is supplied, it is inserted after the
# '#!' sequence but before initialization text begins.  After this
# macro, additional text can be appended to FILE to form the body of
# the child script.  The macro ends with non-zero status if the
# file could not be fully written (such as if the disk is full).
m4_ifdef([AS_INIT_GENERATED],
[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
[m4_defun([_LT_GENERATED_FILE_INIT],
[m4_require([AS_PREPARE])]dnl
[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
[lt_write_fail=0
cat >$1 <<_ASEOF || lt_write_fail=1
#! $SHELL
# Generated by $as_me.
$2
SHELL=\${CONFIG_SHELL-$SHELL}
export SHELL
_ASEOF
cat >>$1 <<\_ASEOF || lt_write_fail=1
AS_SHELL_SANITIZE
_AS_PREPARE
exec AS_MESSAGE_FD>&1
_ASEOF
test 0 = "$lt_write_fail" && chmod +x $1[]dnl
m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT

# LT_OUTPUT
# ---------
# This macro allows early generation of the libtool script (before
# AC_OUTPUT is called), incase it is used in configure for compilation
# tests.
AC_DEFUN([LT_OUTPUT],
[: ${CONFIG_LT=./config.lt}
AC_MSG_NOTICE([creating $CONFIG_LT])
_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
[# Run this file to recreate a libtool stub with the current configuration.])

cat >>"$CONFIG_LT" <<\_LTEOF
lt_cl_silent=false
exec AS_MESSAGE_LOG_FD>>config.log
{
  echo
  AS_BOX([Running $as_me.])
} >&AS_MESSAGE_LOG_FD

lt_cl_help="\
'$as_me' creates a local libtool stub from the current configuration,
for use in further configure time tests before the real libtool is
generated.

Usage: $[0] [[OPTIONS]]

  -h, --help      print this help, then exit
  -V, --version   print version number, then exit
  -q, --quiet     do not print progress messages
  -d, --debug     don't remove temporary files

Report bugs to <bug-libtool@gnu.org>."

lt_cl_version="\
m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
configured by $[0], generated by m4_PACKAGE_STRING.

Copyright (C) 2011 Free Software Foundation, Inc.
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."

while test 0 != $[#]
do
  case $[1] in
    --version | --v* | -V )
      echo "$lt_cl_version"; exit 0 ;;
    --help | --h* | -h )
      echo "$lt_cl_help"; exit 0 ;;
    --debug | --d* | -d )
      debug=: ;;
    --quiet | --q* | --silent | --s* | -q )
      lt_cl_silent=: ;;

    -*) AC_MSG_ERROR([unrecognized option: $[1]
Try '$[0] --help' for more information.]) ;;

    *) AC_MSG_ERROR([unrecognized argument: $[1]
Try '$[0] --help' for more information.]) ;;
  esac
  shift
done

if $lt_cl_silent; then
  exec AS_MESSAGE_FD>/dev/null
fi
_LTEOF

cat >>"$CONFIG_LT" <<_LTEOF
_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
_LTEOF

cat >>"$CONFIG_LT" <<\_LTEOF
AC_MSG_NOTICE([creating $ofile])
_LT_OUTPUT_LIBTOOL_COMMANDS
AS_EXIT(0)
_LTEOF
chmod +x "$CONFIG_LT"

# configure is writing to config.log, but config.lt does its own redirection,
# appending to config.log, which fails on DOS, as config.log is still kept
# open by configure.  Here we exec the FD to /dev/null, effectively closing
# config.log, so it can be properly (re)opened and appended to by config.lt.
lt_cl_success=:
test yes = "$silent" &&
  lt_config_lt_args="$lt_config_lt_args --quiet"
exec AS_MESSAGE_LOG_FD>/dev/null
$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
exec AS_MESSAGE_LOG_FD>>config.log
$lt_cl_success || AS_EXIT(1)
])# LT_OUTPUT


# _LT_CONFIG(TAG)
# ---------------
# If TAG is the built-in tag, create an initial libtool script with a
# default configuration from the untagged config vars.  Otherwise add code
# to config.status for appending the configuration named by TAG from the
# matching tagged config vars.
m4_defun([_LT_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_CONFIG_SAVE_COMMANDS([
  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
  m4_if(_LT_TAG, [C], [
    # See if we are running on zsh, and set the options that allow our
    # commands through without removal of \ escapes.
    if test -n "${ZSH_VERSION+set}"; then
      setopt NO_GLOB_SUBST
    fi

    cfgfile=${ofile}T
    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
    $RM "$cfgfile"

    cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.

# Provide generalized library-building support services.
# Written by Gordon Matzigkeit, 1996

_LT_COPYING
_LT_LIBTOOL_TAGS

# Configured defaults for sys_lib_dlsearch_path munging.
: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}

# ### BEGIN LIBTOOL CONFIG
_LT_LIBTOOL_CONFIG_VARS
_LT_LIBTOOL_TAG_VARS
# ### END LIBTOOL CONFIG

_LT_EOF

    cat <<'_LT_EOF' >> "$cfgfile"

# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE

_LT_PREPARE_MUNGE_PATH_LIST
_LT_PREPARE_CC_BASENAME

# ### END FUNCTIONS SHARED WITH CONFIGURE

_LT_EOF

  case $host_os in
  aix3*)
    cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program.  For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test set != "${COLLECT_NAMES+set}"; then
  COLLECT_NAMES=
  export COLLECT_NAMES
fi
_LT_EOF
    ;;
  esac

  _LT_PROG_LTMAIN

  # We use sed instead of cat because bash on DJGPP gets confused if
  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
  # text mode, it properly converts lines to CR/LF.  This bash problem
  # is reportedly fixed, but why not run on old versions too?
  $SED '$q' "$ltmain" >> "$cfgfile" \
     || (rm -f "$cfgfile"; exit 1)

   mv -f "$cfgfile" "$ofile" ||
    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
  chmod +x "$ofile"
],
[cat <<_LT_EOF >> "$ofile"

dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
dnl in a comment (ie after a #).
# ### BEGIN LIBTOOL TAG CONFIG: $1
_LT_LIBTOOL_TAG_VARS(_LT_TAG)
# ### END LIBTOOL TAG CONFIG: $1
_LT_EOF
])dnl /m4_if
],
[m4_if([$1], [], [
    PACKAGE='$PACKAGE'
    VERSION='$VERSION'
    RM='$RM'
    ofile='$ofile'], [])
])dnl /_LT_CONFIG_SAVE_COMMANDS
])# _LT_CONFIG


# LT_SUPPORTED_TAG(TAG)
# ---------------------
# Trace this macro to discover what tags are supported by the libtool
# --tag option, using:
#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
AC_DEFUN([LT_SUPPORTED_TAG], [])


# C support is built-in for now
m4_define([_LT_LANG_C_enabled], [])
m4_define([_LT_TAGS], [])


# LT_LANG(LANG)
# -------------
# Enable libtool support for the given language if not already enabled.
AC_DEFUN([LT_LANG],
[AC_BEFORE([$0], [LT_OUTPUT])dnl
m4_case([$1],
  [C],			[_LT_LANG(C)],
  [C++],		[_LT_LANG(CXX)],
  [Go],			[_LT_LANG(GO)],
  [Java],		[_LT_LANG(GCJ)],
  [Fortran 77],		[_LT_LANG(F77)],
  [Fortran],		[_LT_LANG(FC)],
  [Windows Resource],	[_LT_LANG(RC)],
  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
    [_LT_LANG($1)],
    [m4_fatal([$0: unsupported language: "$1"])])])dnl
])# LT_LANG


# _LT_LANG(LANGNAME)
# ------------------
m4_defun([_LT_LANG],
[m4_ifdef([_LT_LANG_]$1[_enabled], [],
  [LT_SUPPORTED_TAG([$1])dnl
  m4_append([_LT_TAGS], [$1 ])dnl
  m4_define([_LT_LANG_]$1[_enabled], [])dnl
  _LT_LANG_$1_CONFIG($1)])dnl
])# _LT_LANG


m4_ifndef([AC_PROG_GO], [
# NOTE: This macro has been submitted for inclusion into   #
#  GNU Autoconf as AC_PROG_GO.  When it is available in    #
#  a released version of Autoconf we should remove this    #
#  macro and use it instead.                               #
m4_defun([AC_PROG_GO],
[AC_LANG_PUSH(Go)dnl
AC_ARG_VAR([GOC],     [Go compiler command])dnl
AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
_AC_ARG_VAR_LDFLAGS()dnl
AC_CHECK_TOOL(GOC, gccgo)
if test -z "$GOC"; then
  if test -n "$ac_tool_prefix"; then
    AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
  fi
fi
if test -z "$GOC"; then
  AC_CHECK_PROG(GOC, gccgo, gccgo, false)
fi
])#m4_defun
])#m4_ifndef


# _LT_LANG_DEFAULT_CONFIG
# -----------------------
m4_defun([_LT_LANG_DEFAULT_CONFIG],
[AC_PROVIDE_IFELSE([AC_PROG_CXX],
  [LT_LANG(CXX)],
  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])

AC_PROVIDE_IFELSE([AC_PROG_F77],
  [LT_LANG(F77)],
  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])

AC_PROVIDE_IFELSE([AC_PROG_FC],
  [LT_LANG(FC)],
  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])

dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
dnl pulling things in needlessly.
AC_PROVIDE_IFELSE([AC_PROG_GCJ],
  [LT_LANG(GCJ)],
  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
    [LT_LANG(GCJ)],
    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
      [LT_LANG(GCJ)],
      [m4_ifdef([AC_PROG_GCJ],
	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
       m4_ifdef([A][M_PROG_GCJ],
	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
       m4_ifdef([LT_PROG_GCJ],
	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])

AC_PROVIDE_IFELSE([AC_PROG_GO],
  [LT_LANG(GO)],
  [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])

AC_PROVIDE_IFELSE([LT_PROG_RC],
  [LT_LANG(RC)],
  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
])# _LT_LANG_DEFAULT_CONFIG

# Obsolete macros:
AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
dnl AC_DEFUN([AC_LIBTOOL_F77], [])
dnl AC_DEFUN([AC_LIBTOOL_FC], [])
dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
dnl AC_DEFUN([AC_LIBTOOL_RC], [])


# _LT_TAG_COMPILER
# ----------------
m4_defun([_LT_TAG_COMPILER],
[AC_REQUIRE([AC_PROG_CC])dnl

_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl

# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}

# If no C compiler flags were specified, use CFLAGS.
LTCFLAGS=${LTCFLAGS-"$CFLAGS"}

# Allow CC to be a program name with arguments.
compiler=$CC
])# _LT_TAG_COMPILER


# _LT_COMPILER_BOILERPLATE
# ------------------------
# Check for compiler boilerplate output or warnings with
# the simple compiler test code.
m4_defun([_LT_COMPILER_BOILERPLATE],
[m4_require([_LT_DECL_SED])dnl
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$RM conftest*
])# _LT_COMPILER_BOILERPLATE


# _LT_LINKER_BOILERPLATE
# ----------------------
# Check for linker boilerplate output or warnings with
# the simple link test code.
m4_defun([_LT_LINKER_BOILERPLATE],
[m4_require([_LT_DECL_SED])dnl
ac_outfile=conftest.$ac_objext
echo "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$RM -r conftest*
])# _LT_LINKER_BOILERPLATE

# _LT_REQUIRED_DARWIN_CHECKS
# -------------------------
m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
  case $host_os in
    rhapsody* | darwin*)
    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
    AC_CHECK_TOOL([LIPO], [lipo], [:])
    AC_CHECK_TOOL([OTOOL], [otool], [:])
    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
    _LT_DECL([], [DSYMUTIL], [1],
      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
    _LT_DECL([], [NMEDIT], [1],
      [Tool to change global to local symbols on Mac OS X])
    _LT_DECL([], [LIPO], [1],
      [Tool to manipulate fat objects and archives on Mac OS X])
    _LT_DECL([], [OTOOL], [1],
      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
    _LT_DECL([], [OTOOL64], [1],
      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])

    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
      [lt_cv_apple_cc_single_mod=no
      if test -z "$LT_MULTI_MODULE"; then
	# By default we will add the -single_module flag. You can override
	# by either setting the environment variable LT_MULTI_MODULE
	# non-empty at configure time, or by adding -multi_module to the
	# link flags.
	rm -rf libconftest.dylib*
	echo "int foo(void){return 1;}" > conftest.c
	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
        _lt_result=$?
	# If there is a non-empty error log, and "single_module"
	# appears in it, assume the flag caused a linker warning
        if test -s conftest.err && $GREP single_module conftest.err; then
	  cat conftest.err >&AS_MESSAGE_LOG_FD
	# Otherwise, if the output was created with a 0 exit code from
	# the compiler, it worked.
	elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
	  lt_cv_apple_cc_single_mod=yes
	else
	  cat conftest.err >&AS_MESSAGE_LOG_FD
	fi
	rm -rf libconftest.dylib*
	rm -f conftest.*
      fi])

    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
      [lt_cv_ld_exported_symbols_list],
      [lt_cv_ld_exported_symbols_list=no
      save_LDFLAGS=$LDFLAGS
      echo "_main" > conftest.sym
      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
	[lt_cv_ld_exported_symbols_list=yes],
	[lt_cv_ld_exported_symbols_list=no])
	LDFLAGS=$save_LDFLAGS
    ])

    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
      [lt_cv_ld_force_load=no
      cat > conftest.c << _LT_EOF
int forced_loaded() { return 2;}
_LT_EOF
      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
      echo "$AR $AR_FLAGS libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
      $AR $AR_FLAGS libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
      cat > conftest.c << _LT_EOF
int main() { return 0;}
_LT_EOF
      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
      _lt_result=$?
      if test -s conftest.err && $GREP force_load conftest.err; then
	cat conftest.err >&AS_MESSAGE_LOG_FD
      elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
	lt_cv_ld_force_load=yes
      else
	cat conftest.err >&AS_MESSAGE_LOG_FD
      fi
        rm -f conftest.err libconftest.a conftest conftest.c
        rm -rf conftest.dSYM
    ])
    case $host_os in
    rhapsody* | darwin1.[[012]])
      _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
    darwin1.*)
      _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
    darwin*)
      case $MACOSX_DEPLOYMENT_TARGET,$host in
        10.[[012]],*|,*powerpc*-darwin[[5-8]]*)
          _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
        *)
          _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
      esac
    ;;
  esac
    if test yes = "$lt_cv_apple_cc_single_mod"; then
      _lt_dar_single_mod='$single_module'
    fi
    if test yes = "$lt_cv_ld_exported_symbols_list"; then
      _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
    else
      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
    fi
    if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
      _lt_dsymutil='~$DSYMUTIL $lib || :'
    else
      _lt_dsymutil=
    fi
    ;;
  esac
])


# _LT_DARWIN_LINKER_FEATURES([TAG])
# ---------------------------------
# Checks for linker and compiler features on darwin
m4_defun([_LT_DARWIN_LINKER_FEATURES],
[
  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
  _LT_TAGVAR(hardcode_direct, $1)=no
  _LT_TAGVAR(hardcode_automatic, $1)=yes
  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
  if test yes = "$lt_cv_ld_force_load"; then
    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
    m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
                  [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
  else
    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
  fi
  _LT_TAGVAR(link_all_deplibs, $1)=yes
  _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
  case $cc_basename in
     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
     *) _lt_dar_can_shared=$GCC ;;
  esac
  if test yes = "$_lt_dar_can_shared"; then
    output_verbose_link_cmd=func_echo_all
    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
    _LT_TAGVAR(archive_expsym_cmds, $1)="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
    _LT_TAGVAR(module_expsym_cmds, $1)="$SED -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
    m4_if([$1], [CXX],
[   if test yes != "$lt_cv_apple_cc_single_mod"; then
      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
      _LT_TAGVAR(archive_expsym_cmds, $1)="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
    fi
],[])
  else
  _LT_TAGVAR(ld_shlibs, $1)=no
  fi
])

# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
# ----------------------------------
# Links a minimal program and checks the executable
# for the system default hardcoded library path. In most cases,
# this is /usr/lib:/lib, but when the MPI compilers are used
# the location of the communication and MPI libs are included too.
# If we don't find anything, use the default library path according
# to the aix ld manual.
# Store the results from the different compilers for each TAGNAME.
# Allow to override them for all tags through lt_cv_aix_libpath.
m4_defun([_LT_SYS_MODULE_PATH_AIX],
[m4_require([_LT_DECL_SED])dnl
if test set = "${lt_cv_aix_libpath+set}"; then
  aix_libpath=$lt_cv_aix_libpath
else
  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
  lt_aix_libpath_sed='[
      /Import File Strings/,/^$/ {
	  /^0/ {
	      s/^0  *\([^ ]*\) *$/\1/
	      p
	  }
      }]'
  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
  # Check for a 64-bit object if we didn't find anything.
  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
  fi],[])
  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
  fi
  ])
  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
fi
])# _LT_SYS_MODULE_PATH_AIX


# _LT_SHELL_INIT(ARG)
# -------------------
m4_define([_LT_SHELL_INIT],
[m4_divert_text([M4SH-INIT], [$1
])])# _LT_SHELL_INIT



# _LT_PROG_ECHO_BACKSLASH
# -----------------------
# Find how we can fake an echo command that does not interpret backslash.
# In particular, with Autoconf 2.60 or later we add some code to the start
# of the generated configure script that will find a shell with a builtin
# printf (that we can use as an echo command).
m4_defun([_LT_PROG_ECHO_BACKSLASH],
[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO

AC_MSG_CHECKING([how to print strings])
# Test print first, because it will be a builtin if present.
if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
  ECHO='print -r --'
elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
  ECHO='printf %s\n'
else
  # Use this function as a fallback that always works.
  func_fallback_echo ()
  {
    eval 'cat <<_LTECHO_EOF
$[]1
_LTECHO_EOF'
  }
  ECHO='func_fallback_echo'
fi

# func_echo_all arg...
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
    $ECHO "$*"
}

case $ECHO in
  printf*) AC_MSG_RESULT([printf]) ;;
  print*) AC_MSG_RESULT([print -r]) ;;
  *) AC_MSG_RESULT([cat]) ;;
esac

m4_ifdef([_AS_DETECT_SUGGESTED],
[_AS_DETECT_SUGGESTED([
  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
    PATH=/empty FPATH=/empty; export PATH FPATH
    test "X`printf %s $ECHO`" = "X$ECHO" \
      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])

_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
])# _LT_PROG_ECHO_BACKSLASH


# _LT_WITH_SYSROOT
# ----------------
AC_DEFUN([_LT_WITH_SYSROOT],
[m4_require([_LT_DECL_SED])dnl
AC_MSG_CHECKING([for sysroot])
AC_ARG_WITH([sysroot],
[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
  [Search for dependent libraries within DIR (or the compiler's sysroot
   if not specified).])],
[], [with_sysroot=no])

dnl lt_sysroot will always be passed unquoted.  We quote it here
dnl in case the user passed a directory name.
lt_sysroot=
case $with_sysroot in #(
 yes)
   if test yes = "$GCC"; then
     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
   fi
   ;; #(
 /*)
   lt_sysroot=`echo "$with_sysroot" | $SED -e "$sed_quote_subst"`
   ;; #(
 no|'')
   ;; #(
 *)
   AC_MSG_RESULT([$with_sysroot])
   AC_MSG_ERROR([The sysroot must be an absolute path.])
   ;;
esac

 AC_MSG_RESULT([${lt_sysroot:-no}])
_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
[dependent libraries, and where our libraries should be installed.])])

# _LT_ENABLE_LOCK
# ---------------
m4_defun([_LT_ENABLE_LOCK],
[AC_ARG_ENABLE([libtool-lock],
  [AS_HELP_STRING([--disable-libtool-lock],
    [avoid locking (might break parallel builds)])])
test no = "$enable_libtool_lock" || enable_libtool_lock=yes

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
  # Find out what ABI is being produced by ac_compile, and set mode
  # options accordingly.
  echo 'int i;' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case `$FILECMD conftest.$ac_objext` in
      *ELF-32*)
	HPUX_IA64_MODE=32
	;;
      *ELF-64*)
	HPUX_IA64_MODE=64
	;;
    esac
  fi
  rm -rf conftest*
  ;;
*-*-irix6*)
  # Find out what ABI is being produced by ac_compile, and set linker
  # options accordingly.
  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    if test yes = "$lt_cv_prog_gnu_ld"; then
      case `$FILECMD conftest.$ac_objext` in
	*32-bit*)
	  LD="${LD-ld} -melf32bsmip"
	  ;;
	*N32*)
	  LD="${LD-ld} -melf32bmipn32"
	  ;;
	*64-bit*)
	  LD="${LD-ld} -melf64bmip"
	;;
      esac
    else
      case `$FILECMD conftest.$ac_objext` in
	*32-bit*)
	  LD="${LD-ld} -32"
	  ;;
	*N32*)
	  LD="${LD-ld} -n32"
	  ;;
	*64-bit*)
	  LD="${LD-ld} -64"
	  ;;
      esac
    fi
  fi
  rm -rf conftest*
  ;;

mips64*-*linux*)
  # Find out what ABI is being produced by ac_compile, and set linker
  # options accordingly.
  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    emul=elf
    case `$FILECMD conftest.$ac_objext` in
      *32-bit*)
	emul="${emul}32"
	;;
      *64-bit*)
	emul="${emul}64"
	;;
    esac
    case `$FILECMD conftest.$ac_objext` in
      *MSB*)
	emul="${emul}btsmip"
	;;
      *LSB*)
	emul="${emul}ltsmip"
	;;
    esac
    case `$FILECMD conftest.$ac_objext` in
      *N32*)
	emul="${emul}n32"
	;;
    esac
    LD="${LD-ld} -m $emul"
  fi
  rm -rf conftest*
  ;;

x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
  # Find out what ABI is being produced by ac_compile, and set linker
  # options accordingly.  Note that the listed cases only cover the
  # situations where additional linker options are needed (such as when
  # doing 32-bit compilation for a host where ld defaults to 64-bit, or
  # vice versa); the common cases where no linker options are needed do
  # not appear in the list.
  echo 'int i;' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case `$FILECMD conftest.o` in
      *32-bit*)
	case $host in
	  x86_64-*kfreebsd*-gnu)
	    LD="${LD-ld} -m elf_i386_fbsd"
	    ;;
	  x86_64-*linux*)
	    case `$FILECMD conftest.o` in
	      *x86-64*)
		LD="${LD-ld} -m elf32_x86_64"
		;;
	      *)
		LD="${LD-ld} -m elf_i386"
		;;
	    esac
	    ;;
	  powerpc64le-*linux*)
	    LD="${LD-ld} -m elf32lppclinux"
	    ;;
	  powerpc64-*linux*)
	    LD="${LD-ld} -m elf32ppclinux"
	    ;;
	  s390x-*linux*)
	    LD="${LD-ld} -m elf_s390"
	    ;;
	  sparc64-*linux*)
	    LD="${LD-ld} -m elf32_sparc"
	    ;;
	esac
	;;
      *64-bit*)
	case $host in
	  x86_64-*kfreebsd*-gnu)
	    LD="${LD-ld} -m elf_x86_64_fbsd"
	    ;;
	  x86_64-*linux*)
	    LD="${LD-ld} -m elf_x86_64"
	    ;;
	  powerpcle-*linux*|powerpc64le-*linux*)
	    LD="${LD-ld} -m elf64lppc"
	    ;;
	  powerpc-*linux*|powerpc64-*linux*)
	    LD="${LD-ld} -m elf64ppc"
	    ;;
	  s390*-*linux*|s390*-*tpf*)
	    LD="${LD-ld} -m elf64_s390"
	    ;;
	  sparc*-*linux*)
	    LD="${LD-ld} -m elf64_sparc"
	    ;;
	esac
	;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS=$CFLAGS
  CFLAGS="$CFLAGS -belf"
  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
    [AC_LANG_PUSH(C)
     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
     AC_LANG_POP])
  if test yes != "$lt_cv_cc_needs_belf"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS=$SAVE_CFLAGS
  fi
  ;;
*-*solaris*)
  # Find out what ABI is being produced by ac_compile, and set linker
  # options accordingly.
  echo 'int i;' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case `$FILECMD conftest.o` in
    *64-bit*)
      case $lt_cv_prog_gnu_ld in
      yes*)
        case $host in
        i?86-*-solaris*|x86_64-*-solaris*)
          LD="${LD-ld} -m elf_x86_64"
          ;;
        sparc*-*-solaris*)
          LD="${LD-ld} -m elf64_sparc"
          ;;
        esac
        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
          LD=${LD-ld}_sol2
        fi
        ;;
      *)
	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
	  LD="${LD-ld} -64"
	fi
	;;
      esac
      ;;
    esac
  fi
  rm -rf conftest*
  ;;
esac

need_locks=$enable_libtool_lock
])# _LT_ENABLE_LOCK


# _LT_PROG_AR
# -----------
m4_defun([_LT_PROG_AR],
[AC_CHECK_TOOLS(AR, [ar], false)
: ${AR=ar}
_LT_DECL([], [AR], [1], [The archiver])

# Use ARFLAGS variable as AR's operation code to sync the variable naming with
# Automake.  If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have
# higher priority because thats what people were doing historically (setting
# ARFLAGS for automake and AR_FLAGS for libtool).  FIXME: Make the AR_FLAGS
# variable obsoleted/removed.

test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr}
lt_ar_flags=$AR_FLAGS
_LT_DECL([], [lt_ar_flags], [0], [Flags to create an archive (by configure)])

# Make AR_FLAGS overridable by 'make ARFLAGS='.  Don't try to run-time override
# by AR_FLAGS because that was never working and AR_FLAGS is about to die.
_LT_DECL([], [AR_FLAGS], [\@S|@{ARFLAGS-"\@S|@lt_ar_flags"}],
         [Flags to create an archive])

AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
  [lt_cv_ar_at_file=no
   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
     [echo conftest.$ac_objext > conftest.lst
      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
      AC_TRY_EVAL([lt_ar_try])
      if test 0 -eq "$ac_status"; then
	# Ensure the archiver fails upon bogus file names.
	rm -f conftest.$ac_objext libconftest.a
	AC_TRY_EVAL([lt_ar_try])
	if test 0 -ne "$ac_status"; then
          lt_cv_ar_at_file=@
        fi
      fi
      rm -f conftest.* libconftest.a
     ])
  ])

if test no = "$lt_cv_ar_at_file"; then
  archiver_list_spec=
else
  archiver_list_spec=$lt_cv_ar_at_file
fi
_LT_DECL([], [archiver_list_spec], [1],
  [How to feed a file listing to the archiver])
])# _LT_PROG_AR


# _LT_CMD_OLD_ARCHIVE
# -------------------
m4_defun([_LT_CMD_OLD_ARCHIVE],
[_LT_PROG_AR

AC_CHECK_TOOL(STRIP, strip, :)
test -z "$STRIP" && STRIP=:
_LT_DECL([], [STRIP], [1], [A symbol stripping program])

AC_CHECK_TOOL(RANLIB, ranlib, :)
test -z "$RANLIB" && RANLIB=:
_LT_DECL([], [RANLIB], [1],
    [Commands used to install an old-style archive])

# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=

if test -n "$RANLIB"; then
  case $host_os in
  bitrig* | openbsd*)
    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
    ;;
  *)
    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
    ;;
  esac
  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
fi

case $host_os in
  darwin*)
    lock_old_archive_extraction=yes ;;
  *)
    lock_old_archive_extraction=no ;;
esac
_LT_DECL([], [old_postinstall_cmds], [2])
_LT_DECL([], [old_postuninstall_cmds], [2])
_LT_TAGDECL([], [old_archive_cmds], [2],
    [Commands used to build an old-style archive])
_LT_DECL([], [lock_old_archive_extraction], [0],
    [Whether to use a lock for old archive extraction])
])# _LT_CMD_OLD_ARCHIVE


# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------------------
# Check whether the given compiler option works
AC_DEFUN([_LT_COMPILER_OPTION],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
  [$2=no
   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
   lt_compiler_flag="$3"  ## exclude from sc_useless_quotes_in_assignment
   # Insert the option either (1) after the last *FLAGS variable, or
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&AS_MESSAGE_LOG_FD
   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings other than the usual output.
     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
       $2=yes
     fi
   fi
   $RM conftest*
])

if test yes = "[$]$2"; then
    m4_if([$5], , :, [$5])
else
    m4_if([$6], , :, [$6])
fi
])# _LT_COMPILER_OPTION

# Old name:
AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])


# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
#                  [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------
# Check whether the given linker option works
AC_DEFUN([_LT_LINKER_OPTION],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
  [$2=no
   save_LDFLAGS=$LDFLAGS
   LDFLAGS="$LDFLAGS $3"
   echo "$lt_simple_link_test_code" > conftest.$ac_ext
   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
     # The linker can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test -s conftest.err; then
       # Append any errors to the config.log.
       cat conftest.err 1>&AS_MESSAGE_LOG_FD
       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
       if diff conftest.exp conftest.er2 >/dev/null; then
         $2=yes
       fi
     else
       $2=yes
     fi
   fi
   $RM -r conftest*
   LDFLAGS=$save_LDFLAGS
])

if test yes = "[$]$2"; then
    m4_if([$4], , :, [$4])
else
    m4_if([$5], , :, [$5])
fi
])# _LT_LINKER_OPTION

# Old name:
AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])


# LT_CMD_MAX_LEN
#---------------
AC_DEFUN([LT_CMD_MAX_LEN],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
# find the maximum length of command line arguments
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
  i=0
  teststring=ABCD

  case $build_os in
  msdosdjgpp*)
    # On DJGPP, this test can blow up pretty badly due to problems in libc
    # (any single argument exceeding 2000 bytes causes a buffer overrun
    # during glob expansion).  Even if it were fixed, the result of this
    # check would be larger than it should be.
    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
    ;;

  gnu*)
    # Under GNU Hurd, this test is not required because there is
    # no limit to the length of command line arguments.
    # Libtool will interpret -1 as no limit whatsoever
    lt_cv_sys_max_cmd_len=-1;
    ;;

  cygwin* | mingw* | cegcc*)
    # On Win9x/ME, this test blows up -- it succeeds, but takes
    # about 5 minutes as the teststring grows exponentially.
    # Worse, since 9x/ME are not pre-emptively multitasking,
    # you end up with a "frozen" computer, even though with patience
    # the test eventually succeeds (with a max line length of 256k).
    # Instead, let's just punt: use the minimum linelength reported by
    # all of the supported platforms: 8192 (on NT/2K/XP).
    lt_cv_sys_max_cmd_len=8192;
    ;;

  mint*)
    # On MiNT this can take a long time and run out of memory.
    lt_cv_sys_max_cmd_len=8192;
    ;;

  mint*)
    # On MiNT this can take a long time and run out of memory.
    lt_cv_sys_max_cmd_len=8192;
    ;;

  amigaos*)
    # On AmigaOS with pdksh, this test takes hours, literally.
    # So we just punt and use a minimum line length of 8192.
    lt_cv_sys_max_cmd_len=8192;
    ;;

  bitrig* | darwin* | dragonfly* | freebsd* | midnightbsd* | netbsd* | openbsd*)
    # This has been around since 386BSD, at least.  Likely further.
    if test -x /sbin/sysctl; then
      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
    elif test -x /usr/sbin/sysctl; then
      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
    else
      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
    fi
    # And add a safety zone
    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
    ;;

  interix*)
    # We know the value 262144 and hardcode it with a safety zone (like BSD)
    lt_cv_sys_max_cmd_len=196608
    ;;

  os2*)
    # The test takes a long time on OS/2.
    lt_cv_sys_max_cmd_len=8192
    ;;

  osf*)
    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
    # nice to cause kernel panics so lets avoid the loop below.
    # First set a reasonable default.
    lt_cv_sys_max_cmd_len=16384
    #
    if test -x /sbin/sysconfig; then
      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
        *1*) lt_cv_sys_max_cmd_len=-1 ;;
      esac
    fi
    ;;
  sco3.2v5*)
    lt_cv_sys_max_cmd_len=102400
    ;;
  sysv5* | sco5v6* | sysv4.2uw2*)
    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
    if test -n "$kargmax"; then
      lt_cv_sys_max_cmd_len=`echo $kargmax | $SED 's/.*[[	 ]]//'`
    else
      lt_cv_sys_max_cmd_len=32768
    fi
    ;;
  *)
    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
    if test -n "$lt_cv_sys_max_cmd_len" && \
       test undefined != "$lt_cv_sys_max_cmd_len"; then
      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
    else
      # Make teststring a little bigger before we do anything with it.
      # a 1K string should be a reasonable start.
      for i in 1 2 3 4 5 6 7 8; do
        teststring=$teststring$teststring
      done
      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
      # If test is not a shell built-in, we'll probably end up computing a
      # maximum length that is only half of the actual maximum length, but
      # we can't tell.
      while { test X`env echo "$teststring$teststring" 2>/dev/null` \
	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
	      test 17 != "$i" # 1/2 MB should be enough
      do
        i=`expr $i + 1`
        teststring=$teststring$teststring
      done
      # Only check the string length outside the loop.
      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
      teststring=
      # Add a significant safety factor because C++ compilers can tack on
      # massive amounts of additional arguments before passing them to the
      # linker.  It appears as though 1/2 is a usable value.
      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
    fi
    ;;
  esac
])
if test -n "$lt_cv_sys_max_cmd_len"; then
  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
else
  AC_MSG_RESULT(none)
fi
max_cmd_len=$lt_cv_sys_max_cmd_len
_LT_DECL([], [max_cmd_len], [0],
    [What is the maximum length of a command?])
])# LT_CMD_MAX_LEN

# Old name:
AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])


# _LT_HEADER_DLFCN
# ----------------
m4_defun([_LT_HEADER_DLFCN],
[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
])# _LT_HEADER_DLFCN


# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
# ----------------------------------------------------------------
m4_defun([_LT_TRY_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
if test yes = "$cross_compiling"; then :
  [$4]
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<_LT_EOF
[#line $LINENO "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

#ifdef RTLD_GLOBAL
#  define LT_DLGLOBAL		RTLD_GLOBAL
#else
#  ifdef DL_GLOBAL
#    define LT_DLGLOBAL		DL_GLOBAL
#  else
#    define LT_DLGLOBAL		0
#  endif
#endif

/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
#  ifdef RTLD_LAZY
#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
#  else
#    ifdef DL_LAZY
#      define LT_DLLAZY_OR_NOW		DL_LAZY
#    else
#      ifdef RTLD_NOW
#        define LT_DLLAZY_OR_NOW	RTLD_NOW
#      else
#        ifdef DL_NOW
#          define LT_DLLAZY_OR_NOW	DL_NOW
#        else
#          define LT_DLLAZY_OR_NOW	0
#        endif
#      endif
#    endif
#  endif
#endif

/* When -fvisibility=hidden is used, assume the code has been annotated
   correspondingly for the symbols needed.  */
#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif

int fnord () { return 42; }
int main ()
{
  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
  int status = $lt_dlunknown;

  if (self)
    {
      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
      else
        {
	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
          else puts (dlerror ());
	}
      /* dlclose (self); */
    }
  else
    puts (dlerror ());

  return status;
}]
_LT_EOF
  if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
    lt_status=$?
    case x$lt_status in
      x$lt_dlno_uscore) $1 ;;
      x$lt_dlneed_uscore) $2 ;;
      x$lt_dlunknown|x*) $3 ;;
    esac
  else :
    # compilation failed
    $3
  fi
fi
rm -fr conftest*
])# _LT_TRY_DLOPEN_SELF


# LT_SYS_DLOPEN_SELF
# ------------------
AC_DEFUN([LT_SYS_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
if test yes != "$enable_dlopen"; then
  enable_dlopen=unknown
  enable_dlopen_self=unknown
  enable_dlopen_self_static=unknown
else
  lt_cv_dlopen=no
  lt_cv_dlopen_libs=

  case $host_os in
  beos*)
    lt_cv_dlopen=load_add_on
    lt_cv_dlopen_libs=
    lt_cv_dlopen_self=yes
    ;;

  mingw* | pw32* | cegcc*)
    lt_cv_dlopen=LoadLibrary
    lt_cv_dlopen_libs=
    ;;

  cygwin*)
    lt_cv_dlopen=dlopen
    lt_cv_dlopen_libs=
    ;;

  darwin*)
    # if libdl is installed we need to link against it
    AC_CHECK_LIB([dl], [dlopen],
		[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
    lt_cv_dlopen=dyld
    lt_cv_dlopen_libs=
    lt_cv_dlopen_self=yes
    ])
    ;;

  tpf*)
    # Don't try to run any link tests for TPF.  We know it's impossible
    # because TPF is a cross-compiler, and we know how we open DSOs.
    lt_cv_dlopen=dlopen
    lt_cv_dlopen_libs=
    lt_cv_dlopen_self=no
    ;;

  *)
    AC_CHECK_FUNC([shl_load],
	  [lt_cv_dlopen=shl_load],
      [AC_CHECK_LIB([dld], [shl_load],
	    [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
	[AC_CHECK_FUNC([dlopen],
	      [lt_cv_dlopen=dlopen],
	  [AC_CHECK_LIB([dl], [dlopen],
		[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
	    [AC_CHECK_LIB([svld], [dlopen],
		  [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
	      [AC_CHECK_LIB([dld], [dld_link],
		    [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
	      ])
	    ])
	  ])
	])
      ])
    ;;
  esac

  if test no = "$lt_cv_dlopen"; then
    enable_dlopen=no
  else
    enable_dlopen=yes
  fi

  case $lt_cv_dlopen in
  dlopen)
    save_CPPFLAGS=$CPPFLAGS
    test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"

    save_LDFLAGS=$LDFLAGS
    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"

    save_LIBS=$LIBS
    LIBS="$lt_cv_dlopen_libs $LIBS"

    AC_CACHE_CHECK([whether a program can dlopen itself],
	  lt_cv_dlopen_self, [dnl
	  _LT_TRY_DLOPEN_SELF(
	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
    ])

    if test yes = "$lt_cv_dlopen_self"; then
      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
	  lt_cv_dlopen_self_static, [dnl
	  _LT_TRY_DLOPEN_SELF(
	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
      ])
    fi

    CPPFLAGS=$save_CPPFLAGS
    LDFLAGS=$save_LDFLAGS
    LIBS=$save_LIBS
    ;;
  esac

  case $lt_cv_dlopen_self in
  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
  *) enable_dlopen_self=unknown ;;
  esac

  case $lt_cv_dlopen_self_static in
  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
  *) enable_dlopen_self_static=unknown ;;
  esac
fi
_LT_DECL([dlopen_support], [enable_dlopen], [0],
	 [Whether dlopen is supported])
_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
	 [Whether dlopen of programs is supported])
_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
	 [Whether dlopen of statically linked programs is supported])
])# LT_SYS_DLOPEN_SELF

# Old name:
AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])


# _LT_COMPILER_C_O([TAGNAME])
# ---------------------------
# Check to see if options -c and -o are simultaneously supported by compiler.
# This macro does not hard code the compiler like AC_PROG_CC_C_O.
m4_defun([_LT_COMPILER_C_O],
[m4_require([_LT_DECL_SED])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_TAG_COMPILER])dnl
AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
   $RM -r conftest 2>/dev/null
   mkdir conftest
   cd conftest
   mkdir out
   echo "$lt_simple_compile_test_code" > conftest.$ac_ext

   lt_compiler_flag="-o out/conftest2.$ac_objext"
   # Insert the option either (1) after the last *FLAGS variable, or
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&AS_MESSAGE_LOG_FD
   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
     fi
   fi
   chmod u+w . 2>&AS_MESSAGE_LOG_FD
   $RM conftest*
   # SGI C++ compiler will create directory out/ii_files/ for
   # template instantiation
   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
   $RM out/* && rmdir out
   cd ..
   $RM -r conftest
   $RM conftest*
])
_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
	[Does compiler simultaneously support -c and -o options?])
])# _LT_COMPILER_C_O


# _LT_COMPILER_FILE_LOCKS([TAGNAME])
# ----------------------------------
# Check to see if we can do hard links to lock some files if needed
m4_defun([_LT_COMPILER_FILE_LOCKS],
[m4_require([_LT_ENABLE_LOCK])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_COMPILER_C_O([$1])

hard_links=nottested
if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
  # do not overwrite the value of need_locks provided by the user
  AC_MSG_CHECKING([if we can lock with hard links])
  hard_links=yes
  $RM conftest*
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  touch conftest.a
  ln conftest.a conftest.b 2>&5 || hard_links=no
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  AC_MSG_RESULT([$hard_links])
  if test no = "$hard_links"; then
    AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
    need_locks=warn
  fi
else
  need_locks=no
fi
_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
])# _LT_COMPILER_FILE_LOCKS


# _LT_CHECK_OBJDIR
# ----------------
m4_defun([_LT_CHECK_OBJDIR],
[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
[rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
  lt_cv_objdir=.libs
else
  # MS-DOS does not allow filenames that begin with a dot.
  lt_cv_objdir=_libs
fi
rmdir .libs 2>/dev/null])
objdir=$lt_cv_objdir
_LT_DECL([], [objdir], [0],
         [The name of the directory that contains temporary libtool files])dnl
m4_pattern_allow([LT_OBJDIR])dnl
AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
  [Define to the sub-directory where libtool stores uninstalled libraries.])
])# _LT_CHECK_OBJDIR


# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
# --------------------------------------
# Check hardcoding attributes.
m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
[AC_MSG_CHECKING([how to hardcode library paths into programs])
_LT_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
   test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then

  # We can hardcode non-existent directories.
  if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
     # If the only mechanism to avoid hardcoding is shlibpath_var, we
     # have to relink, otherwise we might link with an installed library
     # when we should be linking with a yet-to-be-installed one
     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
     test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
    # Linking always hardcodes the temporary library directory.
    _LT_TAGVAR(hardcode_action, $1)=relink
  else
    # We can link without hardcoding, and we can hardcode nonexisting dirs.
    _LT_TAGVAR(hardcode_action, $1)=immediate
  fi
else
  # We cannot hardcode anything, or else we can only hardcode existing
  # directories.
  _LT_TAGVAR(hardcode_action, $1)=unsupported
fi
AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])

if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
   test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
  # Fast installation is not supported
  enable_fast_install=no
elif test yes = "$shlibpath_overrides_runpath" ||
     test no = "$enable_shared"; then
  # Fast installation is not necessary
  enable_fast_install=needless
fi
_LT_TAGDECL([], [hardcode_action], [0],
    [How to hardcode a shared library path into an executable])
])# _LT_LINKER_HARDCODE_LIBPATH


# _LT_CMD_STRIPLIB
# ----------------
m4_defun([_LT_CMD_STRIPLIB],
[m4_require([_LT_DECL_EGREP])
striplib=
old_striplib=
AC_MSG_CHECKING([whether stripping libraries is possible])
if test -z "$STRIP"; then
  AC_MSG_RESULT([no])
else
  if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
    old_striplib="$STRIP --strip-debug"
    striplib="$STRIP --strip-unneeded"
    AC_MSG_RESULT([yes])
  else
    case $host_os in
    darwin*)
      # FIXME - insert some real tests, host_os isn't really good enough
      striplib="$STRIP -x"
      old_striplib="$STRIP -S"
      AC_MSG_RESULT([yes])
      ;;
    freebsd*)
      if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then
        old_striplib="$STRIP --strip-debug"
        striplib="$STRIP --strip-unneeded"
        AC_MSG_RESULT([yes])
      else
        AC_MSG_RESULT([no])
      fi
      ;;
    *)
      AC_MSG_RESULT([no])
      ;;
    esac
  fi
fi
_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
_LT_DECL([], [striplib], [1])
])# _LT_CMD_STRIPLIB


# _LT_PREPARE_MUNGE_PATH_LIST
# ---------------------------
# Make sure func_munge_path_list() is defined correctly.
m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
[[# func_munge_path_list VARIABLE PATH
# -----------------------------------
# VARIABLE is name of variable containing _space_ separated list of
# directories to be munged by the contents of PATH, which is string
# having a format:
# "DIR[:DIR]:"
#       string "DIR[ DIR]" will be prepended to VARIABLE
# ":DIR[:DIR]"
#       string "DIR[ DIR]" will be appended to VARIABLE
# "DIRP[:DIRP]::[DIRA:]DIRA"
#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
#       "DIRA[ DIRA]" will be appended to VARIABLE
# "DIR[:DIR]"
#       VARIABLE will be replaced by "DIR[ DIR]"
func_munge_path_list ()
{
    case x@S|@2 in
    x)
        ;;
    *:)
        eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
        ;;
    x:*)
        eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
        ;;
    *::*)
        eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
        eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
        ;;
    *)
        eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
        ;;
    esac
}
]])# _LT_PREPARE_PATH_LIST


# _LT_SYS_DYNAMIC_LINKER([TAG])
# -----------------------------
# PORTME Fill in your ld.so characteristics
m4_defun([_LT_SYS_DYNAMIC_LINKER],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_OBJDUMP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
m4_if([$1],
	[], [
if test yes = "$GCC"; then
  case $host_os in
    darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
    *) lt_awk_arg='/^libraries:/' ;;
  esac
  case $host_os in
    mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
    *) lt_sed_strip_eq='s|=/|/|g' ;;
  esac
  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
  case $lt_search_path_spec in
  *\;*)
    # if the path contains ";" then we assume it to be the separator
    # otherwise default to the standard path separator (i.e. ":") - it is
    # assumed that no part of a normal pathname contains ";" but that should
    # okay in the real world where ";" in dirpaths is itself problematic.
    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
    ;;
  *)
    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
    ;;
  esac
  # Ok, now we have the path, separated by spaces, we can step through it
  # and add multilib dir if necessary...
  lt_tmp_lt_search_path_spec=
  lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
  # ...but if some path component already ends with the multilib dir we assume
  # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
  case "$lt_multi_os_dir; $lt_search_path_spec " in
  "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
    lt_multi_os_dir=
    ;;
  esac
  for lt_sys_path in $lt_search_path_spec; do
    if test -d "$lt_sys_path$lt_multi_os_dir"; then
      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
    elif test -n "$lt_multi_os_dir"; then
      test -d "$lt_sys_path" && \
	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
    fi
  done
  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
BEGIN {RS = " "; FS = "/|\n";} {
  lt_foo = "";
  lt_count = 0;
  for (lt_i = NF; lt_i > 0; lt_i--) {
    if ($lt_i != "" && $lt_i != ".") {
      if ($lt_i == "..") {
        lt_count++;
      } else {
        if (lt_count == 0) {
          lt_foo = "/" $lt_i lt_foo;
        } else {
          lt_count--;
        }
      }
    }
  }
  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
}'`
  # AWK program above erroneously prepends '/' to C:/dos/paths
  # for these hosts.
  case $host_os in
    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
      $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
  esac
  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi])
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
need_lib_prefix=unknown
hardcode_into_libs=no

# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown

AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
[User-defined run-time library search path.])

case $host_os in
aix3*)
  version_type=linux # correct to gnu/linux during the next big refactor
  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
  shlibpath_var=LIBPATH

  # AIX 3 has no versioning support, so we append a major version to the name.
  soname_spec='$libname$release$shared_ext$major'
  ;;

aix[[4-9]]*)
  version_type=linux # correct to gnu/linux during the next big refactor
  need_lib_prefix=no
  need_version=no
  hardcode_into_libs=yes
  if test ia64 = "$host_cpu"; then
    # AIX 5 supports IA64
    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
    shlibpath_var=LD_LIBRARY_PATH
  else
    # With GCC up to 2.95.x, collect2 would create an import file
    # for dependence libraries.  The import file would start with
    # the line '#! .'.  This would cause the generated library to
    # depend on '.', always an invalid library.  This was fixed in
    # development snapshots of GCC prior to 3.0.
    case $host_os in
      aix4 | aix4.[[01]] | aix4.[[01]].*)
      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
	   echo ' yes '
	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
	:
      else
	can_build_shared=no
      fi
      ;;
    esac
    # Using Import Files as archive members, it is possible to support
    # filename-based versioning of shared library archives on AIX. While
    # this would work for both with and without runtime linking, it will
    # prevent static linking of such archives. So we do filename-based
    # shared library versioning with .so extension only, which is used
    # when both runtime linking and shared linking is enabled.
    # Unfortunately, runtime linking may impact performance, so we do
    # not want this to be the default eventually. Also, we use the
    # versioned .so libs for executables only if there is the -brtl
    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
    # To allow for filename-based versioning support, we need to create
    # libNAME.so.V as an archive file, containing:
    # *) an Import File, referring to the versioned filename of the
    #    archive as well as the shared archive member, telling the
    #    bitwidth (32 or 64) of that shared object, and providing the
    #    list of exported symbols of that shared object, eventually
    #    decorated with the 'weak' keyword
    # *) the shared object with the F_LOADONLY flag set, to really avoid
    #    it being seen by the linker.
    # At run time we better use the real file rather than another symlink,
    # but for link time we create the symlink libNAME.so -> libNAME.so.V

    case $with_aix_soname,$aix_use_runtimelinking in
    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
    # soname into executable. Probably we can add versioning support to
    # collect2, so additional links can be useful in future.
    aix,yes) # traditional libtool
      dynamic_linker='AIX unversionable lib.so'
      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
      # instead of lib<name>.a to let people know that these are not
      # typical AIX shared libraries.
      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
      ;;
    aix,no) # traditional AIX only
      dynamic_linker='AIX lib.a[(]lib.so.V[)]'
      # We preserve .a as extension for shared libraries through AIX4.2
      # and later when we are not doing run time linking.
      library_names_spec='$libname$release.a $libname.a'
      soname_spec='$libname$release$shared_ext$major'
      ;;
    svr4,*) # full svr4 only
      dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
      # We do not specify a path in Import Files, so LIBPATH fires.
      shlibpath_overrides_runpath=yes
      ;;
    *,yes) # both, prefer svr4
      dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
      # unpreferred sharedlib libNAME.a needs extra handling
      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
      # We do not specify a path in Import Files, so LIBPATH fires.
      shlibpath_overrides_runpath=yes
      ;;
    *,no) # both, prefer aix
      dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
      library_names_spec='$libname$release.a $libname.a'
      soname_spec='$libname$release$shared_ext$major'
      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
      ;;
    esac
    shlibpath_var=LIBPATH
  fi
  ;;

amigaos*)
  case $host_cpu in
  powerpc)
    # Since July 2007 AmigaOS4 officially supports .so libraries.
    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
    ;;
  m68k)
    library_names_spec='$libname.ixlibrary $libname.a'
    # Create ${libname}_ixlibrary.a entries in /sys/libs.
    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
    ;;
  esac
  ;;

beos*)
  library_names_spec='$libname$shared_ext'
  dynamic_linker="$host_os ld.so"
  shlibpath_var=LIBRARY_PATH
  ;;

bsdi[[45]]*)
  version_type=linux # correct to gnu/linux during the next big refactor
  need_version=no
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
  soname_spec='$libname$release$shared_ext$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
  # the default ld.so.conf also contains /usr/contrib/lib and
  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
  # libtool to hard-code these into programs
  ;;

cygwin* | mingw* | pw32* | cegcc*)
  version_type=windows
  shrext_cmds=.dll
  need_version=no
  need_lib_prefix=no

  case $GCC,$cc_basename in
  yes,*)
    # gcc
    library_names_spec='$libname.dll.a'
    # DLL is installed to $(libdir)/../bin by postinstall_cmds
    postinstall_cmds='base_file=`basename \$file`~
      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
      dldir=$destdir/`dirname \$dlpath`~
      test -d \$dldir || mkdir -p \$dldir~
      $install_prog $dir/$dlname \$dldir/$dlname~
      chmod a+x \$dldir/$dlname~
      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
      fi'
    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
      dlpath=$dir/\$dldll~
       $RM \$dlpath'
    shlibpath_overrides_runpath=yes

    case $host_os in
    cygwin*)
      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
      soname_spec='`echo $libname | $SED -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
m4_if([$1], [],[
      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
      ;;
    mingw* | cegcc*)
      # MinGW DLLs use traditional 'lib' prefix
      soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
      ;;
    pw32*)
      # pw32 DLLs use 'pw' prefix rather than 'lib'
      library_names_spec='`echo $libname | $SED -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
      ;;
    esac
    dynamic_linker='Win32 ld.exe'
    ;;

  *,cl* | *,icl*)
    # Native MSVC or ICC
    libname_spec='$name'
    soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
    library_names_spec='$libname.dll.lib'

    case $build_os in
    mingw*)
      sys_lib_search_path_spec=
      lt_save_ifs=$IFS
      IFS=';'
      for lt_path in $LIB
      do
        IFS=$lt_save_ifs
        # Let DOS variable expansion print the short 8.3 style file name.
        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
      done
      IFS=$lt_save_ifs
      # Convert to MSYS style.
      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
      ;;
    cygwin*)
      # Convert to unix form, then to dos form, then back to unix form
      # but this time dos style (no spaces!) so that the unix form looks
      # like /cygdrive/c/PROGRA~1:/cygdr...
      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
      ;;
    *)
      sys_lib_search_path_spec=$LIB
      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
        # It is most probably a Windows format PATH.
        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
      else
        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
      fi
      # FIXME: find the short name or the path components, as spaces are
      # common. (e.g. "Program Files" -> "PROGRA~1")
      ;;
    esac

    # DLL is installed to $(libdir)/../bin by postinstall_cmds
    postinstall_cmds='base_file=`basename \$file`~
      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
      dldir=$destdir/`dirname \$dlpath`~
      test -d \$dldir || mkdir -p \$dldir~
      $install_prog $dir/$dlname \$dldir/$dlname'
    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
      dlpath=$dir/\$dldll~
       $RM \$dlpath'
    shlibpath_overrides_runpath=yes
    dynamic_linker='Win32 link.exe'
    ;;

  *)
    # Assume MSVC and ICC wrapper
    library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
    dynamic_linker='Win32 ld.exe'
    ;;
  esac
  # FIXME: first we should search . and the directory the executable is in
  shlibpath_var=PATH
  ;;

darwin* | rhapsody*)
  dynamic_linker="$host_os dyld"
  version_type=darwin
  need_lib_prefix=no
  need_version=no
  library_names_spec='$libname$release$versuffix$shared_ext $libname$release$major$shared_ext $libname$shared_ext'
  soname_spec='$libname$release$major$shared_ext'
  shlibpath_overrides_runpath=yes
  shlibpath_var=DYLD_LIBRARY_PATH
  shrext_cmds='`test .$module = .yes && echo .bundle || echo .dylib`'
m4_if([$1], [],[
  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
  ;;

dgux*)
  version_type=linux # correct to gnu/linux during the next big refactor
  need_lib_prefix=no
  need_version=no
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
  soname_spec='$libname$release$shared_ext$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

freebsd* | dragonfly* | midnightbsd*)
  # DragonFly does not have aout.  When/if they implement a new
  # versioning mechanism, adjust this.
  if test -x /usr/bin/objformat; then
    objformat=`/usr/bin/objformat`
  else
    case $host_os in
    freebsd[[23]].*) objformat=aout ;;
    *) objformat=elf ;;
    esac
  fi
  # Handle Gentoo/FreeBSD as it was Linux
  case $host_vendor in
    gentoo)
      version_type=linux ;;
    *)
      version_type=freebsd-$objformat ;;
  esac

  case $version_type in
    freebsd-elf*)
      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
      soname_spec='$libname$release$shared_ext$major'
      need_version=no
      need_lib_prefix=no
      ;;
    freebsd-*)
      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
      need_version=yes
      ;;
    linux)
      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
      soname_spec='${libname}${release}${shared_ext}$major'
      need_lib_prefix=no
      need_version=no
      ;;
  esac
  shlibpath_var=LD_LIBRARY_PATH
  case $host_os in
  freebsd2.*)
    shlibpath_overrides_runpath=yes
    ;;
  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
    shlibpath_overrides_runpath=yes
    hardcode_into_libs=yes
    ;;
  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
    shlibpath_overrides_runpath=no
    hardcode_into_libs=yes
    ;;
  *) # from 4.6 on, and DragonFly
    shlibpath_overrides_runpath=yes
    hardcode_into_libs=yes
    ;;
  esac
  ;;

haiku*)
  version_type=linux # correct to gnu/linux during the next big refactor
  need_lib_prefix=no
  need_version=no
  dynamic_linker="$host_os runtime_loader"
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
  soname_spec='$libname$release$shared_ext$major'
  shlibpath_var=LIBRARY_PATH
  shlibpath_overrides_runpath=no
  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
  hardcode_into_libs=yes
  ;;

hpux9* | hpux10* | hpux11*)
  # Give a soname corresponding to the major version so that dld.sl refuses to
  # link against other versions.
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  case $host_cpu in
  ia64*)
    shrext_cmds='.so'
    hardcode_into_libs=yes
    dynamic_linker="$host_os dld.so"
    shlibpath_var=LD_LIBRARY_PATH
    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
    soname_spec='$libname$release$shared_ext$major'
    if test 32 = "$HPUX_IA64_MODE"; then
      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
    else
      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
    fi
    ;;
  hppa*64*)
    shrext_cmds='.sl'
    hardcode_into_libs=yes
    dynamic_linker="$host_os dld.sl"
    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
    soname_spec='$libname$release$shared_ext$major'
    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
    ;;
  *)
    shrext_cmds='.sl'
    dynamic_linker="$host_os dld.sl"
    shlibpath_var=SHLIB_PATH
    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
    soname_spec='$libname$release$shared_ext$major'
    ;;
  esac
  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
  postinstall_cmds='chmod 555 $lib'
  # or fails outright, so override atomically:
  install_override_mode=555
  ;;

interix[[3-9]]*)
  version_type=linux # correct to gnu/linux during the next big refactor
  need_lib_prefix=no
  need_version=no
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
  soname_spec='$libname$release$shared_ext$major'
  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  hardcode_into_libs=yes
  ;;

irix5* | irix6* | nonstopux*)
  case $host_os in
    nonstopux*) version_type=nonstopux ;;
    *)
	if test yes = "$lt_cv_prog_gnu_ld"; then
		version_type=linux # correct to gnu/linux during the next big refactor
	else
		version_type=irix
	fi ;;
  esac
  need_lib_prefix=no
  need_version=no
  soname_spec='$libname$release$shared_ext$major'
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
  case $host_os in
  irix5* | nonstopux*)
    libsuff= shlibsuff=
    ;;
  *)
    case $LD in # libtool.m4 will add one of these switches to LD
    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
      libsuff= shlibsuff= libmagic=32-bit;;
    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
      libsuff=32 shlibsuff=N32 libmagic=N32;;
    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
      libsuff=64 shlibsuff=64 libmagic=64-bit;;
    *) libsuff= shlibsuff= libmagic=never-match;;
    esac
    ;;
  esac
  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
  shlibpath_overrides_runpath=no
  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
  hardcode_into_libs=yes
  ;;

# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
  dynamic_linker=no
  ;;

linux*android*)
  version_type=none # Android doesn't support versioned libraries.
  need_lib_prefix=no
  need_version=no
  library_names_spec='$libname$release$shared_ext'
  soname_spec='$libname$release$shared_ext'
  finish_cmds=
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes

  # This implies no fast_install, which is unacceptable.
  # Some rework will be needed to allow for fast_install
  # before this can be enabled.
  hardcode_into_libs=yes

  dynamic_linker='Android linker'
  # Don't embed -rpath directories since the linker doesn't support them.
  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
  ;;

# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
  version_type=linux # correct to gnu/linux during the next big refactor
  need_lib_prefix=no
  need_version=no
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
  soname_spec='$libname$release$shared_ext$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no

  # Some binutils ld are patched to set DT_RUNPATH
  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
    [lt_cv_shlibpath_overrides_runpath=no
    save_LDFLAGS=$LDFLAGS
    save_libdir=$libdir
    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
	 [lt_cv_shlibpath_overrides_runpath=yes])])
    LDFLAGS=$save_LDFLAGS
    libdir=$save_libdir
    ])
  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath

  # This implies no fast_install, which is unacceptable.
  # Some rework will be needed to allow for fast_install
  # before this can be enabled.
  hardcode_into_libs=yes

  # Ideally, we could use ldconfig to report *all* directores which are
  # searched for libraries, however this is still not possible.  Aside from not
  # being certain /sbin/ldconfig is available, command
  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
  # even though it is searched at run-time.  Try to do the best guess by
  # appending ld.so.conf contents (and includes) to the search path.
  if test -f /etc/ld.so.conf; then
    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
  fi

  # We used to test for /lib/ld.so.1 and disable shared libraries on
  # powerpc, because MkLinux only supported shared libraries with the
  # GNU dynamic linker.  Since this was broken with cross compilers,
  # most powerpc-linux boxes support dynamic linking these days and
  # people can always --disable-shared, the test was removed, and we
  # assume the GNU/Linux dynamic linker is in use.
  dynamic_linker='GNU/Linux ld.so'
  ;;

netbsd*)
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
    dynamic_linker='NetBSD (a.out) ld.so'
  else
    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
    soname_spec='$libname$release$shared_ext$major'
    dynamic_linker='NetBSD ld.elf_so'
  fi
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  ;;

newsos6)
  version_type=linux # correct to gnu/linux during the next big refactor
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;

*nto* | *qnx*)
  version_type=qnx
  need_lib_prefix=no
  need_version=no
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
  soname_spec='$libname$release$shared_ext$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  hardcode_into_libs=yes
  dynamic_linker='ldqnx.so'
  ;;

openbsd* | bitrig*)
  version_type=sunos
  sys_lib_dlsearch_path_spec=/usr/lib
  need_lib_prefix=no
  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
    need_version=no
  else
    need_version=yes
  fi
  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;

os2*)
  libname_spec='$name'
  version_type=windows
  shrext_cmds=.dll
  need_version=no
  need_lib_prefix=no
  # OS/2 can only load a DLL with a base name of 8 characters or less.
  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
    v=$($ECHO $release$versuffix | tr -d .-);
    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
    $ECHO $n$v`$shared_ext'
  library_names_spec='${libname}_dll.$libext'
  dynamic_linker='OS/2 ld.exe'
  shlibpath_var=BEGINLIBPATH
  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
  postinstall_cmds='base_file=`basename \$file`~
    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
    dldir=$destdir/`dirname \$dlpath`~
    test -d \$dldir || mkdir -p \$dldir~
    $install_prog $dir/$dlname \$dldir/$dlname~
    chmod a+x \$dldir/$dlname~
    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
    fi'
  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
    dlpath=$dir/\$dldll~
    $RM \$dlpath'
  ;;

osf3* | osf4* | osf5*)
  version_type=osf
  need_lib_prefix=no
  need_version=no
  soname_spec='$libname$release$shared_ext$major'
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
  ;;

rdos*)
  dynamic_linker=no
  ;;

solaris*)
  version_type=linux # correct to gnu/linux during the next big refactor
  need_lib_prefix=no
  need_version=no
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
  soname_spec='$libname$release$shared_ext$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  # ldd complains unless libraries are executable
  postinstall_cmds='chmod +x $lib'
  ;;

sunos4*)
  version_type=sunos
  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  if test yes = "$with_gnu_ld"; then
    need_lib_prefix=no
  fi
  need_version=yes
  ;;

sysv4 | sysv4.3*)
  version_type=linux # correct to gnu/linux during the next big refactor
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
  soname_spec='$libname$release$shared_ext$major'
  shlibpath_var=LD_LIBRARY_PATH
  case $host_vendor in
    sni)
      shlibpath_overrides_runpath=no
      need_lib_prefix=no
      runpath_var=LD_RUN_PATH
      ;;
    siemens)
      need_lib_prefix=no
      ;;
    motorola)
      need_lib_prefix=no
      need_version=no
      shlibpath_overrides_runpath=no
      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
      ;;
  esac
  ;;

sysv4*MP*)
  if test -d /usr/nec; then
    version_type=linux # correct to gnu/linux during the next big refactor
    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
    soname_spec='$libname$shared_ext.$major'
    shlibpath_var=LD_LIBRARY_PATH
  fi
  ;;

sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
  version_type=sco
  need_lib_prefix=no
  need_version=no
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
  soname_spec='$libname$release$shared_ext$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  if test yes = "$with_gnu_ld"; then
    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
  else
    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
    case $host_os in
      sco3.2v5*)
        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
	;;
    esac
  fi
  sys_lib_dlsearch_path_spec='/usr/lib'
  ;;

tpf*)
  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
  version_type=linux # correct to gnu/linux during the next big refactor
  need_lib_prefix=no
  need_version=no
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  hardcode_into_libs=yes
  ;;

uts4*)
  version_type=linux # correct to gnu/linux during the next big refactor
  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
  soname_spec='$libname$release$shared_ext$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

*)
  dynamic_linker=no
  ;;
esac
AC_MSG_RESULT([$dynamic_linker])
test no = "$dynamic_linker" && can_build_shared=no

variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test yes = "$GCC"; then
  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi

if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi

if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi

# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec

# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"

# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH

_LT_DECL([], [variables_saved_for_relink], [1],
    [Variables whose values should be saved in libtool wrapper scripts and
    restored at link time])
_LT_DECL([], [need_lib_prefix], [0],
    [Do we need the "lib" prefix for modules?])
_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
_LT_DECL([], [version_type], [0], [Library versioning type])
_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
_LT_DECL([], [shlibpath_overrides_runpath], [0],
    [Is shlibpath searched before the hard-coded library search path?])
_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
_LT_DECL([], [library_names_spec], [1],
    [[List of archive names.  First name is the real one, the rest are links.
    The last name is the one that the linker finds with -lNAME]])
_LT_DECL([], [soname_spec], [1],
    [[The coded name of the library, if different from the real name]])
_LT_DECL([], [install_override_mode], [1],
    [Permission mode override for installation of shared libraries])
_LT_DECL([], [postinstall_cmds], [2],
    [Command to use after installation of a shared archive])
_LT_DECL([], [postuninstall_cmds], [2],
    [Command to use after uninstallation of a shared archive])
_LT_DECL([], [finish_cmds], [2],
    [Commands used to finish a libtool library installation in a directory])
_LT_DECL([], [finish_eval], [1],
    [[As "finish_cmds", except a single script fragment to be evaled but
    not shown]])
_LT_DECL([], [hardcode_into_libs], [0],
    [Whether we should hardcode library paths into libraries])
_LT_DECL([], [sys_lib_search_path_spec], [2],
    [Compile-time system search path for libraries])
_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
    [Detected run-time system search path for libraries])
_LT_DECL([], [configure_time_lt_sys_library_path], [2],
    [Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
])# _LT_SYS_DYNAMIC_LINKER


# _LT_PATH_TOOL_PREFIX(TOOL)
# --------------------------
# find a file program that can recognize shared library
AC_DEFUN([_LT_PATH_TOOL_PREFIX],
[m4_require([_LT_DECL_EGREP])dnl
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
[[\\/*] |  ?:[\\/]*])
  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
  ;;
*)
  lt_save_MAGIC_CMD=$MAGIC_CMD
  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word.  This closes a longstanding sh security hole.
  ac_dummy="m4_if([$2], , $PATH, [$2])"
  for ac_dir in $ac_dummy; do
    IFS=$lt_save_ifs
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$1"; then
      lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
      if test -n "$file_magic_test_file"; then
	case $deplibs_check_method in
	"file_magic "*)
	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
	    $EGREP "$file_magic_regex" > /dev/null; then
	    :
	  else
	    cat <<_LT_EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

_LT_EOF
	  fi ;;
	esac
      fi
      break
    fi
  done
  IFS=$lt_save_ifs
  MAGIC_CMD=$lt_save_MAGIC_CMD
  ;;
esac])
MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
  AC_MSG_RESULT($MAGIC_CMD)
else
  AC_MSG_RESULT(no)
fi
_LT_DECL([], [MAGIC_CMD], [0],
	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
])# _LT_PATH_TOOL_PREFIX

# Old name:
AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])


# _LT_PATH_MAGIC
# --------------
# find a file program that can recognize a shared library
m4_defun([_LT_PATH_MAGIC],
[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
  if test -n "$ac_tool_prefix"; then
    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
  else
    MAGIC_CMD=:
  fi
fi
])# _LT_PATH_MAGIC


# LT_PATH_LD
# ----------
# find the pathname to the GNU or non-GNU linker
AC_DEFUN([LT_PATH_LD],
[AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PROG_ECHO_BACKSLASH])dnl

AC_ARG_WITH([gnu-ld],
    [AS_HELP_STRING([--with-gnu-ld],
	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
    [test no = "$withval" || with_gnu_ld=yes],
    [with_gnu_ld=no])dnl

ac_prog=ld
if test yes = "$GCC"; then
  # Check if gcc -print-prog-name=ld gives a path.
  AC_MSG_CHECKING([for ld used by $CC])
  case $host in
  *-*-mingw*)
    # gcc leaves a trailing carriage return, which upsets mingw
    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
  *)
    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
  esac
  case $ac_prog in
    # Accept absolute paths.
    [[\\/]]* | ?:[[\\/]]*)
      re_direlt='/[[^/]][[^/]]*/\.\./'
      # Canonicalize the pathname of ld
      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD=$ac_prog
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test yes = "$with_gnu_ld"; then
  AC_MSG_CHECKING([for GNU ld])
else
  AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
  for ac_dir in $PATH; do
    IFS=$lt_save_ifs
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      lt_cv_path_LD=$ac_dir/$ac_prog
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some variants of GNU ld only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
      *GNU* | *'with BFD'*)
	test no != "$with_gnu_ld" && break
	;;
      *)
	test yes != "$with_gnu_ld" && break
	;;
      esac
    fi
  done
  IFS=$lt_save_ifs
else
  lt_cv_path_LD=$LD # Let the user override the test with a path.
fi])
LD=$lt_cv_path_LD
if test -n "$LD"; then
  AC_MSG_RESULT($LD)
else
  AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
_LT_PATH_LD_GNU
AC_SUBST([LD])

_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
])# LT_PATH_LD

# Old names:
AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_PROG_LD], [])
dnl AC_DEFUN([AC_PROG_LD], [])


# _LT_PATH_LD_GNU
#- --------------
m4_defun([_LT_PATH_LD_GNU],
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
  lt_cv_prog_gnu_ld=yes
  ;;
*)
  lt_cv_prog_gnu_ld=no
  ;;
esac])
with_gnu_ld=$lt_cv_prog_gnu_ld
])# _LT_PATH_LD_GNU


# _LT_CMD_RELOAD
# --------------
# find reload flag for linker
#   -- PORTME Some linkers may need a different reload flag.
m4_defun([_LT_CMD_RELOAD],
[AC_CACHE_CHECK([for $LD option to reload object files],
  lt_cv_ld_reload_flag,
  [lt_cv_ld_reload_flag='-r'])
reload_flag=$lt_cv_ld_reload_flag
case $reload_flag in
"" | " "*) ;;
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
  cygwin* | mingw* | pw32* | cegcc*)
    if test yes != "$GCC"; then
      reload_cmds=false
    fi
    ;;
  darwin*)
    if test yes = "$GCC"; then
      reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
    else
      reload_cmds='$LD$reload_flag -o $output$reload_objs'
    fi
    ;;
esac
_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
_LT_TAGDECL([], [reload_cmds], [2])dnl
])# _LT_CMD_RELOAD


# _LT_PATH_DD
# -----------
# find a working dd
m4_defun([_LT_PATH_DD],
[AC_CACHE_CHECK([for a working dd], [ac_cv_path_lt_DD],
[printf 0123456789abcdef0123456789abcdef >conftest.i
cat conftest.i conftest.i >conftest2.i
: ${lt_DD:=$DD}
AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
[if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
  cmp -s conftest.i conftest.out \
  && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
fi])
rm -f conftest.i conftest2.i conftest.out])
])# _LT_PATH_DD


# _LT_CMD_TRUNCATE
# ----------------
# find command to truncate a binary pipe
m4_defun([_LT_CMD_TRUNCATE],
[m4_require([_LT_PATH_DD])
AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
[printf 0123456789abcdef0123456789abcdef >conftest.i
cat conftest.i conftest.i >conftest2.i
lt_cv_truncate_bin=
if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
  cmp -s conftest.i conftest.out \
  && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
fi
rm -f conftest.i conftest2.i conftest.out
test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
  [Command to truncate a binary pipe])
])# _LT_CMD_TRUNCATE


# _LT_CHECK_MAGIC_METHOD
# ----------------------
# how to check for library dependencies
#  -- PORTME fill in with the dynamic library characteristics
m4_defun([_LT_CHECK_MAGIC_METHOD],
[m4_require([_LT_DECL_EGREP])
m4_require([_LT_DECL_OBJDUMP])
AC_CACHE_CHECK([how to recognize dependent libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
# that responds to the $file_magic_cmd with a given extended regex.
# If you have 'file' or equivalent on your system and you're not sure
# whether 'pass_all' will *always* work, you probably want this one.

case $host_os in
aix[[4-9]]*)
  lt_cv_deplibs_check_method=pass_all
  ;;

beos*)
  lt_cv_deplibs_check_method=pass_all
  ;;

bsdi[[45]]*)
  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
  lt_cv_file_magic_cmd='$FILECMD -L'
  lt_cv_file_magic_test_file=/shlib/libc.so
  ;;

cygwin*)
  # func_win32_libid is a shell function defined in ltmain.sh
  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
  lt_cv_file_magic_cmd='func_win32_libid'
  ;;

mingw* | pw32*)
  # Base MSYS/MinGW do not provide the 'file' command needed by
  # func_win32_libid shell function, so use a weaker test based on 'objdump',
  # unless we find 'file', for example because we are cross-compiling.
  if ( file / ) >/dev/null 2>&1; then
    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
    lt_cv_file_magic_cmd='func_win32_libid'
  else
    # Keep this pattern in sync with the one in func_win32_libid.
    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
    lt_cv_file_magic_cmd='$OBJDUMP -f'
  fi
  ;;

cegcc*)
  # use the weaker test based on 'objdump'. See mingw*.
  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
  lt_cv_file_magic_cmd='$OBJDUMP -f'
  ;;

darwin* | rhapsody*)
  lt_cv_deplibs_check_method=pass_all
  ;;

freebsd* | dragonfly* | midnightbsd*)
  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
    case $host_cpu in
    i*86 )
      # Not sure whether the presence of OpenBSD here was a mistake.
      # Let's accept both of them until this is cleared up.
      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
      lt_cv_file_magic_cmd=$FILECMD
      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
      ;;
    esac
  else
    lt_cv_deplibs_check_method=pass_all
  fi
  ;;

haiku*)
  lt_cv_deplibs_check_method=pass_all
  ;;

hpux10.20* | hpux11*)
  lt_cv_file_magic_cmd=$FILECMD
  case $host_cpu in
  ia64*)
    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
    ;;
  hppa*64*)
    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
    ;;
  *)
    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
    lt_cv_file_magic_test_file=/usr/lib/libc.sl
    ;;
  esac
  ;;

interix[[3-9]]*)
  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
  ;;

irix5* | irix6* | nonstopux*)
  case $LD in
  *-32|*"-32 ") libmagic=32-bit;;
  *-n32|*"-n32 ") libmagic=N32;;
  *-64|*"-64 ") libmagic=64-bit;;
  *) libmagic=never-match;;
  esac
  lt_cv_deplibs_check_method=pass_all
  ;;

# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
  lt_cv_deplibs_check_method=pass_all
  ;;

netbsd*)
  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
  else
    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
  fi
  ;;

newos6*)
  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
  lt_cv_file_magic_cmd=$FILECMD
  lt_cv_file_magic_test_file=/usr/lib/libnls.so
  ;;

*nto* | *qnx*)
  lt_cv_deplibs_check_method=pass_all
  ;;

openbsd* | bitrig*)
  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
  else
    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
  fi
  ;;

osf3* | osf4* | osf5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

rdos*)
  lt_cv_deplibs_check_method=pass_all
  ;;

solaris*)
  lt_cv_deplibs_check_method=pass_all
  ;;

sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
  lt_cv_deplibs_check_method=pass_all
  ;;

sysv4 | sysv4.3*)
  case $host_vendor in
  motorola)
    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
    ;;
  ncr)
    lt_cv_deplibs_check_method=pass_all
    ;;
  sequent)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
    ;;
  sni)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
    lt_cv_file_magic_test_file=/lib/libc.so
    ;;
  siemens)
    lt_cv_deplibs_check_method=pass_all
    ;;
  pc)
    lt_cv_deplibs_check_method=pass_all
    ;;
  esac
  ;;

tpf*)
  lt_cv_deplibs_check_method=pass_all
  ;;
os2*)
  lt_cv_deplibs_check_method=pass_all
  ;;
esac
])

file_magic_glob=
want_nocaseglob=no
if test "$build" = "$host"; then
  case $host_os in
  mingw* | pw32*)
    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
      want_nocaseglob=yes
    else
      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
    fi
    ;;
  esac
fi

file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown

_LT_DECL([], [deplibs_check_method], [1],
    [Method to check whether dependent libraries are shared objects])
_LT_DECL([], [file_magic_cmd], [1],
    [Command to use when deplibs_check_method = "file_magic"])
_LT_DECL([], [file_magic_glob], [1],
    [How to find potential files when deplibs_check_method = "file_magic"])
_LT_DECL([], [want_nocaseglob], [1],
    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
])# _LT_CHECK_MAGIC_METHOD


# LT_PATH_NM
# ----------
# find the pathname to a BSD- or MS-compatible name lister
AC_DEFUN([LT_PATH_NM],
[AC_REQUIRE([AC_PROG_CC])dnl
AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
  # Let the user override the test.
  lt_cv_path_NM=$NM
else
  lt_nm_to_check=${ac_tool_prefix}nm
  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
    lt_nm_to_check="$lt_nm_to_check nm"
  fi
  for lt_tmp_nm in $lt_nm_to_check; do
    lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
      IFS=$lt_save_ifs
      test -z "$ac_dir" && ac_dir=.
      tmp_nm=$ac_dir/$lt_tmp_nm
      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
	# Check to see if the nm accepts a BSD-compat flag.
	# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
	#   nm: unknown option "B" ignored
	# Tru64's nm complains that /dev/null is an invalid object file
	# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
	case $build_os in
	mingw*) lt_bad_file=conftest.nm/nofile ;;
	*) lt_bad_file=/dev/null ;;
	esac
	case `"$tmp_nm" -B $lt_bad_file 2>&1 | $SED '1q'` in
	*$lt_bad_file* | *'Invalid file or object type'*)
	  lt_cv_path_NM="$tmp_nm -B"
	  break 2
	  ;;
	*)
	  case `"$tmp_nm" -p /dev/null 2>&1 | $SED '1q'` in
	  */dev/null*)
	    lt_cv_path_NM="$tmp_nm -p"
	    break 2
	    ;;
	  *)
	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
	    continue # so that we can try to find one that supports BSD flags
	    ;;
	  esac
	  ;;
	esac
      fi
    done
    IFS=$lt_save_ifs
  done
  : ${lt_cv_path_NM=no}
fi])
if test no != "$lt_cv_path_NM"; then
  NM=$lt_cv_path_NM
else
  # Didn't find any BSD compatible name lister, look for dumpbin.
  if test -n "$DUMPBIN"; then :
    # Let the user override the test.
  else
    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | $SED '1q'` in
    *COFF*)
      DUMPBIN="$DUMPBIN -symbols -headers"
      ;;
    *)
      DUMPBIN=:
      ;;
    esac
  fi
  AC_SUBST([DUMPBIN])
  if test : != "$DUMPBIN"; then
    NM=$DUMPBIN
  fi
fi
test -z "$NM" && NM=nm
AC_SUBST([NM])
_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl

AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
  [lt_cv_nm_interface="BSD nm"
  echo "int some_variable = 0;" > conftest.$ac_ext
  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
  (eval "$ac_compile" 2>conftest.err)
  cat conftest.err >&AS_MESSAGE_LOG_FD
  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
  cat conftest.err >&AS_MESSAGE_LOG_FD
  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
  cat conftest.out >&AS_MESSAGE_LOG_FD
  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
    lt_cv_nm_interface="MS dumpbin"
  fi
  rm -f conftest*])
])# LT_PATH_NM

# Old names:
AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_PROG_NM], [])
dnl AC_DEFUN([AC_PROG_NM], [])

# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
# --------------------------------
# how to determine the name of the shared library
# associated with a specific link library.
#  -- PORTME fill in with the dynamic library characteristics
m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
[m4_require([_LT_DECL_EGREP])
m4_require([_LT_DECL_OBJDUMP])
m4_require([_LT_DECL_DLLTOOL])
AC_CACHE_CHECK([how to associate runtime and link libraries],
lt_cv_sharedlib_from_linklib_cmd,
[lt_cv_sharedlib_from_linklib_cmd='unknown'

case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
  # two different shell functions defined in ltmain.sh;
  # decide which one to use based on capabilities of $DLLTOOL
  case `$DLLTOOL --help 2>&1` in
  *--identify-strict*)
    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
    ;;
  *)
    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
    ;;
  esac
  ;;
*)
  # fallback: assume linklib IS sharedlib
  lt_cv_sharedlib_from_linklib_cmd=$ECHO
  ;;
esac
])
sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO

_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
    [Command to associate shared and link libraries])
])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB


# _LT_PATH_MANIFEST_TOOL
# ----------------------
# locate the manifest tool
m4_defun([_LT_PATH_MANIFEST_TOOL],
[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
  [lt_cv_path_mainfest_tool=no
  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
  cat conftest.err >&AS_MESSAGE_LOG_FD
  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
    lt_cv_path_mainfest_tool=yes
  fi
  rm -f conftest*])
if test yes != "$lt_cv_path_mainfest_tool"; then
  MANIFEST_TOOL=:
fi
_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
])# _LT_PATH_MANIFEST_TOOL


# _LT_DLL_DEF_P([FILE])
# ---------------------
# True iff FILE is a Windows DLL '.def' file.
# Keep in sync with func_dll_def_p in the libtool script
AC_DEFUN([_LT_DLL_DEF_P],
[dnl
  test DEF = "`$SED -n dnl
    -e '\''s/^[[	 ]]*//'\'' dnl Strip leading whitespace
    -e '\''/^\(;.*\)*$/d'\'' dnl      Delete empty lines and comments
    -e '\''s/^\(EXPORTS\|LIBRARY\)\([[	 ]].*\)*$/DEF/p'\'' dnl
    -e q dnl                          Only consider the first "real" line
    $1`" dnl
])# _LT_DLL_DEF_P


# LT_LIB_M
# --------
# check for math library
AC_DEFUN([LT_LIB_M],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
  # These system don't have libm, or don't need it
  ;;
*-ncr-sysv4.3*)
  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
  ;;
*)
  AC_CHECK_LIB(m, cos, LIBM=-lm)
  ;;
esac
AC_SUBST([LIBM])
])# LT_LIB_M

# Old name:
AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_CHECK_LIBM], [])


# _LT_COMPILER_NO_RTTI([TAGNAME])
# -------------------------------
m4_defun([_LT_COMPILER_NO_RTTI],
[m4_require([_LT_TAG_COMPILER])dnl

_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=

if test yes = "$GCC"; then
  case $cc_basename in
  nvcc*)
    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
  *)
    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
  esac

  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
    lt_cv_prog_compiler_rtti_exceptions,
    [-fno-rtti -fno-exceptions], [],
    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
fi
_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
	[Compiler flag to turn off builtin functions])
])# _LT_COMPILER_NO_RTTI


# _LT_CMD_GLOBAL_SYMBOLS
# ----------------------
m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([LT_PATH_NM])dnl
AC_REQUIRE([LT_PATH_LD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_TAG_COMPILER])dnl

# Check for command to grab the raw symbol name followed by C symbol from nm.
AC_MSG_CHECKING([command to parse $NM output from $compiler object])
AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
[
# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix.  What could be older than Ultrix?!! ;)]

# Character class describing NM global symbol codes.
symcode='[[BCDEGRST]]'

# Regexp to match symbols that can be accessed directly from C.
sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'

# Define system-specific variables.
case $host_os in
aix*)
  symcode='[[BCDT]]'
  ;;
cygwin* | mingw* | pw32* | cegcc*)
  symcode='[[ABCDGISTW]]'
  ;;
hpux*)
  if test ia64 = "$host_cpu"; then
    symcode='[[ABCDEGRST]]'
  fi
  ;;
irix* | nonstopux*)
  symcode='[[BCDEGRST]]'
  ;;
osf*)
  symcode='[[BCDEGQRST]]'
  ;;
solaris*)
  symcode='[[BDRT]]'
  ;;
sco3.2v5*)
  symcode='[[DT]]'
  ;;
sysv4.2uw2*)
  symcode='[[DT]]'
  ;;
sysv5* | sco5v6* | unixware* | OpenUNIX*)
  symcode='[[ABDT]]'
  ;;
sysv4)
  symcode='[[DFNSTU]]'
  ;;
esac

# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
  symcode='[[ABCDGIRSTW]]' ;;
esac

if test "$lt_cv_nm_interface" = "MS dumpbin"; then
  # Gets list of data symbols to import.
  lt_cv_sys_global_symbol_to_import="$SED -n -e 's/^I .* \(.*\)$/\1/p'"
  # Adjust the below global symbol transforms to fixup imported variables.
  lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
  lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
  lt_c_name_lib_hook="\
  -e 's/^I .* \(lib.*\)$/  {\"\1\", (void *) 0},/p'\
  -e 's/^I .* \(.*\)$/  {\"lib\1\", (void *) 0},/p'"
else
  # Disable hooks by default.
  lt_cv_sys_global_symbol_to_import=
  lt_cdecl_hook=
  lt_c_name_hook=
  lt_c_name_lib_hook=
fi

# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
lt_cv_sys_global_symbol_to_cdecl="$SED -n"\
$lt_cdecl_hook\
" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"

# Transform an extracted symbol line into symbol name and symbol address
lt_cv_sys_global_symbol_to_c_name_address="$SED -n"\
$lt_c_name_hook\
" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"

# Transform an extracted symbol line into symbol name with lib prefix and
# symbol address.
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="$SED -n"\
$lt_c_name_lib_hook\
" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
" -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"lib\1\", (void *) \&\1},/p'"

# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
mingw*)
  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
  ;;
esac

# Try without a prefix underscore, then with it.
for ac_symprfx in "" "_"; do

  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
  symxfrm="\\1 $ac_symprfx\\2 \\2"

  # Write the raw and C identifiers.
  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
    # Fake it for dumpbin and say T for any non-static function,
    # D for any global variable and I for any imported variable.
    # Also find C++ and __fastcall symbols from MSVC++ or ICC,
    # which start with @ or ?.
    lt_cv_sys_global_symbol_pipe="$AWK ['"\
"     {last_section=section; section=\$ 3};"\
"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
"     /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
"     /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
"     /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
"     \$ 0!~/External *\|/{next};"\
"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
"     {if(hide[section]) next};"\
"     {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
"     {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
"     s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
"     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
"     ' prfx=^$ac_symprfx]"
  else
    lt_cv_sys_global_symbol_pipe="$SED -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
  fi
  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | $SED '/ __gnu_lto/d'"

  # Check to see that the pipe works correctly.
  pipe_works=no

  rm -f conftest*
  cat > conftest.$ac_ext <<_LT_EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(void);
void nm_test_func(void){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
_LT_EOF

  if AC_TRY_EVAL(ac_compile); then
    # Now try to grab the symbols.
    nlist=conftest.nm
    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
      # Try sorting and uniquifying the output.
      if sort "$nlist" | uniq > "$nlist"T; then
	mv -f "$nlist"T "$nlist"
      else
	rm -f "$nlist"T
      fi

      # Make sure that we snagged all the symbols we need.
      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
	  cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
/* DATA imports from DLLs on WIN32 can't be const, because runtime
   relocations are performed -- see ld's documentation on pseudo-relocs.  */
# define LT@&t@_DLSYM_CONST
#elif defined __osf__
/* This system does not cope well with relocations in const data.  */
# define LT@&t@_DLSYM_CONST
#else
# define LT@&t@_DLSYM_CONST const
#endif

#ifdef __cplusplus
extern "C" {
#endif

_LT_EOF
	  # Now generate the symbol file.
	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'

	  cat <<_LT_EOF >> conftest.$ac_ext

/* The mapping between symbol names and symbols.  */
LT@&t@_DLSYM_CONST struct {
  const char *name;
  void       *address;
}
lt__PROGRAM__LTX_preloaded_symbols[[]] =
{
  { "@PROGRAM@", (void *) 0 },
_LT_EOF
	  $SED "s/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
	  cat <<\_LT_EOF >> conftest.$ac_ext
  {0, (void *) 0}
};

/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
  return lt__PROGRAM__LTX_preloaded_symbols;
}
#endif

#ifdef __cplusplus
}
#endif
_LT_EOF
	  # Now try linking the two files.
	  mv conftest.$ac_objext conftstm.$ac_objext
	  lt_globsym_save_LIBS=$LIBS
	  lt_globsym_save_CFLAGS=$CFLAGS
	  LIBS=conftstm.$ac_objext
	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
	  if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
	    pipe_works=yes
	  fi
	  LIBS=$lt_globsym_save_LIBS
	  CFLAGS=$lt_globsym_save_CFLAGS
	else
	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
	fi
      else
	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
      fi
    else
      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
    fi
  else
    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
    cat conftest.$ac_ext >&5
  fi
  rm -rf conftest* conftst*

  # Do not use the global_symbol_pipe unless it works.
  if test yes = "$pipe_works"; then
    break
  else
    lt_cv_sys_global_symbol_pipe=
  fi
done
])
if test -z "$lt_cv_sys_global_symbol_pipe"; then
  lt_cv_sys_global_symbol_to_cdecl=
fi
if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
  AC_MSG_RESULT(failed)
else
  AC_MSG_RESULT(ok)
fi

# Response file support.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
  nm_file_list_spec='@'
elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
  nm_file_list_spec='@'
fi

_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
    [Take the output of nm and produce a listing of raw symbols and C names])
_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
    [Transform the output of nm in a proper C declaration])
_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
    [Transform the output of nm into a list of symbols to manually relocate])
_LT_DECL([global_symbol_to_c_name_address],
    [lt_cv_sys_global_symbol_to_c_name_address], [1],
    [Transform the output of nm in a C name address pair])
_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
    [Transform the output of nm in a C name address pair when lib prefix is needed])
_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
    [The name lister interface])
_LT_DECL([], [nm_file_list_spec], [1],
    [Specify filename containing input files for $NM])
]) # _LT_CMD_GLOBAL_SYMBOLS


# _LT_COMPILER_PIC([TAGNAME])
# ---------------------------
m4_defun([_LT_COMPILER_PIC],
[m4_require([_LT_TAG_COMPILER])dnl
_LT_TAGVAR(lt_prog_compiler_wl, $1)=
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)=

m4_if([$1], [CXX], [
  # C++ specific cases for pic, static, wl, etc.
  if test yes = "$GXX"; then
    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'

    case $host_os in
    aix*)
      # All AIX code is PIC.
      if test ia64 = "$host_cpu"; then
	# AIX 5 now supports IA64 processor
	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      fi
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
      ;;

    amigaos*)
      case $host_cpu in
      powerpc)
            # see comment about AmigaOS4 .so support
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
        ;;
      m68k)
            # FIXME: we need at least 68020 code to build shared libraries, but
            # adding the '-m68020' flag to GCC prevents building anything better,
            # like '-m68040'.
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
        ;;
      esac
      ;;

    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
      # PIC is the default for these OSes.
      ;;
    mingw* | cygwin* | os2* | pw32* | cegcc*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      # Although the cygwin gcc ignores -fPIC, still need this for old-style
      # (--disable-auto-import) libraries
      m4_if([$1], [GCJ], [],
	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
      case $host_os in
      os2*)
	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
	;;
      esac
      ;;
    darwin* | rhapsody*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
      ;;
    *djgpp*)
      # DJGPP does not support shared libraries at all
      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
      ;;
    haiku*)
      # PIC is the default for Haiku.
      # The "-static" flag exists, but is broken.
      _LT_TAGVAR(lt_prog_compiler_static, $1)=
      ;;
    interix[[3-9]]*)
      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
      # Instead, we relocate shared libraries at runtime.
      ;;
    sysv4*MP*)
      if test -d /usr/nec; then
	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
      fi
      ;;
    hpux*)
      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
      # sets the default TLS model and affects inlining.
      case $host_cpu in
      hppa*64*)
	;;
      *)
	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
	;;
      esac
      ;;
    *qnx* | *nto*)
      # QNX uses GNU C++, but need to define -shared option too, otherwise
      # it will coredump.
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
      ;;
    *)
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
      ;;
    esac
  else
    case $host_os in
      aix[[4-9]]*)
	# All AIX code is PIC.
	if test ia64 = "$host_cpu"; then
	  # AIX 5 now supports IA64 processor
	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
	else
	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
	fi
	;;
      chorus*)
	case $cc_basename in
	cxch68*)
	  # Green Hills C++ Compiler
	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
	  ;;
	esac
	;;
      mingw* | cygwin* | os2* | pw32* | cegcc*)
	# This hack is so that the source file can tell whether it is being
	# built for inclusion in a dll (and should export symbols for example).
	m4_if([$1], [GCJ], [],
	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
	;;
      dgux*)
	case $cc_basename in
	  ec++*)
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
	    ;;
	  ghcx*)
	    # Green Hills C++ Compiler
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
	    ;;
	  *)
	    ;;
	esac
	;;
      freebsd* | dragonfly* | midnightbsd*)
	# FreeBSD uses GNU C++
	;;
      hpux9* | hpux10* | hpux11*)
	case $cc_basename in
	  CC*)
	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	    _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
	    if test ia64 != "$host_cpu"; then
	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
	    fi
	    ;;
	  aCC*)
	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	    _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
	    case $host_cpu in
	    hppa*64*|ia64*)
	      # +Z the default
	      ;;
	    *)
	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
	      ;;
	    esac
	    ;;
	  *)
	    ;;
	esac
	;;
      interix*)
	# This is c89, which is MS Visual C++ (no shared libs)
	# Anyone wants to do a port?
	;;
      irix5* | irix6* | nonstopux*)
	case $cc_basename in
	  CC*)
	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
	    # CC pic flag -KPIC is the default.
	    ;;
	  *)
	    ;;
	esac
	;;
      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
	case $cc_basename in
	  KCC*)
	    # KAI C++ Compiler
	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
	    ;;
	  ecpc* )
	    # old Intel C++ for x86_64, which still supported -KPIC.
	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
	    ;;
	  icpc* )
	    # Intel C++, used to be incompatible with GCC.
	    # ICC 10 doesn't accept -KPIC any more.
	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
	    ;;
	  pgCC* | pgcpp*)
	    # Portland Group C++ compiler
	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
	    ;;
	  cxx*)
	    # Compaq C++
	    # Make sure the PIC flag is empty.  It appears that all Alpha
	    # Linux and Compaq Tru64 Unix objects are PIC.
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
	    ;;
	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
	    # IBM XL 8.0, 9.0 on PPC and BlueGene
	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
	    ;;
	  *)
	    case `$CC -V 2>&1 | $SED 5q` in
	    *Sun\ C*)
	      # Sun C++ 5.9
	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
	      ;;
	    esac
	    ;;
	esac
	;;
      lynxos*)
	;;
      m88k*)
	;;
      mvs*)
	case $cc_basename in
	  cxx*)
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
	    ;;
	  *)
	    ;;
	esac
	;;
      netbsd*)
	;;
      *qnx* | *nto*)
        # QNX uses GNU C++, but need to define -shared option too, otherwise
        # it will coredump.
        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
        ;;
      osf3* | osf4* | osf5*)
	case $cc_basename in
	  KCC*)
	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
	    ;;
	  RCC*)
	    # Rational C++ 2.4.1
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
	    ;;
	  cxx*)
	    # Digital/Compaq C++
	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	    # Make sure the PIC flag is empty.  It appears that all Alpha
	    # Linux and Compaq Tru64 Unix objects are PIC.
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
	    ;;
	  *)
	    ;;
	esac
	;;
      psos*)
	;;
      solaris*)
	case $cc_basename in
	  CC* | sunCC*)
	    # Sun C++ 4.2, 5.x and Centerline C++
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
	    ;;
	  gcx*)
	    # Green Hills C++ Compiler
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
	    ;;
	  *)
	    ;;
	esac
	;;
      sunos4*)
	case $cc_basename in
	  CC*)
	    # Sun C++ 4.x
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
	    ;;
	  lcc*)
	    # Lucid
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
	    ;;
	  *)
	    ;;
	esac
	;;
      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
	case $cc_basename in
	  CC*)
	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
	    ;;
	esac
	;;
      tandem*)
	case $cc_basename in
	  NCC*)
	    # NonStop-UX NCC 3.20
	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
	    ;;
	  *)
	    ;;
	esac
	;;
      vxworks*)
	;;
      *)
	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
	;;
    esac
  fi
],
[
  if test yes = "$GCC"; then
    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'

    case $host_os in
      aix*)
      # All AIX code is PIC.
      if test ia64 = "$host_cpu"; then
	# AIX 5 now supports IA64 processor
	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      fi
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
      ;;

    amigaos*)
      case $host_cpu in
      powerpc)
            # see comment about AmigaOS4 .so support
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
        ;;
      m68k)
            # FIXME: we need at least 68020 code to build shared libraries, but
            # adding the '-m68020' flag to GCC prevents building anything better,
            # like '-m68040'.
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
        ;;
      esac
      ;;

    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
      # PIC is the default for these OSes.
      ;;

    mingw* | cygwin* | pw32* | os2* | cegcc*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      # Although the cygwin gcc ignores -fPIC, still need this for old-style
      # (--disable-auto-import) libraries
      m4_if([$1], [GCJ], [],
	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
      case $host_os in
      os2*)
	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
	;;
      esac
      ;;

    darwin* | rhapsody*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
      ;;

    haiku*)
      # PIC is the default for Haiku.
      # The "-static" flag exists, but is broken.
      _LT_TAGVAR(lt_prog_compiler_static, $1)=
      ;;

    hpux*)
      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
      # sets the default TLS model and affects inlining.
      case $host_cpu in
      hppa*64*)
	# +Z the default
	;;
      *)
	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
	;;
      esac
      ;;

    interix[[3-9]]*)
      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
      # Instead, we relocate shared libraries at runtime.
      ;;

    msdosdjgpp*)
      # Just because we use GCC doesn't mean we suddenly get shared libraries
      # on systems that don't support them.
      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
      enable_shared=no
      ;;

    *nto* | *qnx*)
      # QNX uses GNU C++, but need to define -shared option too, otherwise
      # it will coredump.
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
      ;;

    sysv4*MP*)
      if test -d /usr/nec; then
	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
      fi
      ;;

    *)
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
      ;;
    esac

    case $cc_basename in
    nvcc*) # Cuda Compiler Driver 2.2
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
      if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
        _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
      fi
      ;;
    esac
  else
    # PORTME Check for flag to pass linker flags through the system compiler.
    case $host_os in
    aix*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      if test ia64 = "$host_cpu"; then
	# AIX 5 now supports IA64 processor
	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      else
	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
      fi
      ;;

    darwin* | rhapsody*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
      case $cc_basename in
      nagfor*)
        # NAG Fortran compiler
        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
        ;;
      esac
      ;;

    mingw* | cygwin* | pw32* | os2* | cegcc*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      m4_if([$1], [GCJ], [],
	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
      case $host_os in
      os2*)
	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
	;;
      esac
      ;;

    hpux9* | hpux10* | hpux11*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
      # not for PA HP-UX.
      case $host_cpu in
      hppa*64*|ia64*)
	# +Z the default
	;;
      *)
	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
	;;
      esac
      # Is there a better lt_prog_compiler_static that works with the bundled CC?
      _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
      ;;

    irix5* | irix6* | nonstopux*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      # PIC (with -KPIC) is the default.
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
      ;;

    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
      case $cc_basename in
      # old Intel for x86_64, which still supported -KPIC.
      ecc*)
	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
        ;;
      # icc used to be incompatible with GCC.
      # ICC 10 doesn't accept -KPIC any more.
      icc* | ifort*)
	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
        ;;
      # Lahey Fortran 8.1.
      lf95*)
	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
	;;
      nagfor*)
	# NAG Fortran compiler
	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
	;;
      tcc*)
	# Fabrice Bellard et al's Tiny C Compiler
	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
	;;
      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
        # Portland Group compilers (*not* the Pentium gcc compiler,
	# which looks to be a dead project)
	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
        ;;
      ccc*)
        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
        # All Alpha code is PIC.
        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
        ;;
      xl* | bgxl* | bgf* | mpixl*)
	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
	;;
      *)
	case `$CC -V 2>&1 | $SED 5q` in
	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
	  ;;
	*Sun\ F* | *Sun*Fortran*)
	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
	  ;;
	*Sun\ C*)
	  # Sun C 5.9
	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	  ;;
        *Intel*\ [[CF]]*Compiler*)
	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
	  ;;
	*Portland\ Group*)
	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
	  ;;
	esac
	;;
      esac
      ;;

    newsos6)
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;

    *nto* | *qnx*)
      # QNX uses GNU C++, but need to define -shared option too, otherwise
      # it will coredump.
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
      ;;

    osf3* | osf4* | osf5*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      # All OSF/1 code is PIC.
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
      ;;

    rdos*)
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
      ;;

    solaris*)
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      case $cc_basename in
      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
      *)
	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
      esac
      ;;

    sunos4*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;

    sysv4 | sysv4.2uw2* | sysv4.3*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;

    sysv4*MP*)
      if test -d /usr/nec; then
	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      fi
      ;;

    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;

    unicos*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
      ;;

    uts4*)
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;

    *)
      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
      ;;
    esac
  fi
])
case $host_os in
  # For platforms that do not support PIC, -DPIC is meaningless:
  *djgpp*)
    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
    ;;
  *)
    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
    ;;
esac

AC_CACHE_CHECK([for $compiler option to produce PIC],
  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)

#
# Check to make sure the PIC flag actually works.
#
if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
     "" | " "*) ;;
     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
     esac],
    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
fi
_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
	[Additional compiler flags for building library objects])

_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
	[How to pass a linker flag through the compiler])
#
# Check to make sure the static flag actually works.
#
wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
  $lt_tmp_static_flag,
  [],
  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
	[Compiler flag to prevent dynamic linking])
])# _LT_COMPILER_PIC


# _LT_LINKER_SHLIBS([TAGNAME])
# ----------------------------
# See if the linker supports building shared libraries.
m4_defun([_LT_LINKER_SHLIBS],
[AC_REQUIRE([LT_PATH_LD])dnl
AC_REQUIRE([LT_PATH_NM])dnl
m4_require([_LT_PATH_MANIFEST_TOOL])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_TAG_COMPILER])dnl
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
m4_if([$1], [CXX], [
  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
  case $host_os in
  aix[[4-9]]*)
    # If we're using GNU nm, then we don't want the "-C" option.
    # -C means demangle to GNU nm, but means don't demangle to AIX nm.
    # Without the "-l" option, or with the "-B" option, AIX nm treats
    # weak defined symbols like other global defined symbols, whereas
    # GNU nm marks them as "W".
    # While the 'weak' keyword is ignored in the Export File, we need
    # it in the Import File for the 'aix-soname' feature, so we have
    # to replace the "-B" option with "-P" for AIX nm.
    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
    else
      _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
    fi
    ;;
  pw32*)
    _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
    ;;
  cygwin* | mingw* | cegcc*)
    case $cc_basename in
    cl* | icl*)
      _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
      ;;
    *)
      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
      ;;
    esac
    ;;
  *)
    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
    ;;
  esac
], [
  runpath_var=
  _LT_TAGVAR(allow_undefined_flag, $1)=
  _LT_TAGVAR(always_export_symbols, $1)=no
  _LT_TAGVAR(archive_cmds, $1)=
  _LT_TAGVAR(archive_expsym_cmds, $1)=
  _LT_TAGVAR(compiler_needs_object, $1)=no
  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
  _LT_TAGVAR(hardcode_automatic, $1)=no
  _LT_TAGVAR(hardcode_direct, $1)=no
  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
  _LT_TAGVAR(hardcode_libdir_separator, $1)=
  _LT_TAGVAR(hardcode_minus_L, $1)=no
  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
  _LT_TAGVAR(inherit_rpath, $1)=no
  _LT_TAGVAR(link_all_deplibs, $1)=unknown
  _LT_TAGVAR(module_cmds, $1)=
  _LT_TAGVAR(module_expsym_cmds, $1)=
  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
  _LT_TAGVAR(thread_safe_flag_spec, $1)=
  _LT_TAGVAR(whole_archive_flag_spec, $1)=
  # include_expsyms should be a list of space-separated symbols to be *always*
  # included in the symbol list
  _LT_TAGVAR(include_expsyms, $1)=
  # exclude_expsyms can be an extended regexp of symbols to exclude
  # it will be wrapped by ' (' and ')$', so one must not match beginning or
  # end of line.  Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
  # as well as any symbol that contains 'd'.
  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
  # platforms (ab)use it in PIC code, but their linkers get confused if
  # the symbol is explicitly referenced.  Since portable code cannot
  # rely on this symbol name, it's probably fine to never include it in
  # preloaded symbol tables.
  # Exclude shared library initialization/finalization symbols.
dnl Note also adjust exclude_expsyms for C++ above.
  extract_expsyms_cmds=

  case $host_os in
  cygwin* | mingw* | pw32* | cegcc*)
    # FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time
    # When not using gcc, we currently assume that we are using
    # Microsoft Visual C++ or Intel C++ Compiler.
    if test yes != "$GCC"; then
      with_gnu_ld=no
    fi
    ;;
  interix*)
    # we just hope/assume this is gcc and not c89 (= MSVC++ or ICC)
    with_gnu_ld=yes
    ;;
  openbsd* | bitrig*)
    with_gnu_ld=no
    ;;
  esac

  _LT_TAGVAR(ld_shlibs, $1)=yes

  # On some targets, GNU ld is compatible enough with the native linker
  # that we're better off using the native interface for both.
  lt_use_gnu_ld_interface=no
  if test yes = "$with_gnu_ld"; then
    case $host_os in
      aix*)
	# The AIX port of GNU ld has always aspired to compatibility
	# with the native linker.  However, as the warning in the GNU ld
	# block says, versions before 2.19.5* couldn't really create working
	# shared libraries, regardless of the interface used.
	case `$LD -v 2>&1` in
	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
	  *)
	    lt_use_gnu_ld_interface=yes
	    ;;
	esac
	;;
      *)
	lt_use_gnu_ld_interface=yes
	;;
    esac
  fi

  if test yes = "$lt_use_gnu_ld_interface"; then
    # If archive_cmds runs LD, not CC, wlarc should be empty
    wlarc='$wl'

    # Set some defaults for GNU ld with shared library support. These
    # are reset later if shared libraries are not supported. Putting them
    # here allows them to be overridden if necessary.
    runpath_var=LD_RUN_PATH
    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
    # ancient GNU ld didn't support --whole-archive et. al.
    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
      _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
    else
      _LT_TAGVAR(whole_archive_flag_spec, $1)=
    fi
    supports_anon_versioning=no
    case `$LD -v | $SED -e 's/([[^)]]\+)\s\+//' 2>&1` in
      *GNU\ gold*) supports_anon_versioning=yes ;;
      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
      *\ 2.11.*) ;; # other 2.11 versions
      *) supports_anon_versioning=yes ;;
    esac

    # See if GNU ld supports shared libraries.
    case $host_os in
    aix[[3-9]]*)
      # On AIX/PPC, the GNU linker is very broken
      if test ia64 != "$host_cpu"; then
	_LT_TAGVAR(ld_shlibs, $1)=no
	cat <<_LT_EOF 1>&2

*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support.  If you
*** really care for shared libraries, you may want to install binutils
*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
*** You will then need to restart the configuration process.

_LT_EOF
      fi
      ;;

    amigaos*)
      case $host_cpu in
      powerpc)
            # see comment about AmigaOS4 .so support
            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
            _LT_TAGVAR(archive_expsym_cmds, $1)=''
        ;;
      m68k)
            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
            _LT_TAGVAR(hardcode_minus_L, $1)=yes
        ;;
      esac
      ;;

    beos*)
      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
	# support --undefined.  This deserves some investigation.  FIXME
	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
      else
	_LT_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;

    cygwin* | mingw* | pw32* | cegcc*)
      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
      # as there is no search path for DLLs.
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
      _LT_TAGVAR(always_export_symbols, $1)=no
      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']

      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
	# If the export-symbols file already is a .def file, use it as
	# is; otherwise, prepend EXPORTS...
	_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
          cp $export_symbols $output_objdir/$soname.def;
        else
          echo EXPORTS > $output_objdir/$soname.def;
          cat $export_symbols >> $output_objdir/$soname.def;
        fi~
        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
      else
	_LT_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;

    haiku*)
      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
      _LT_TAGVAR(link_all_deplibs, $1)=yes
      ;;

    os2*)
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_TAGVAR(hardcode_minus_L, $1)=yes
      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
      shrext_cmds=.dll
      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
	$ECHO EXPORTS >> $output_objdir/$libname.def~
	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
	emximp -o $lib $output_objdir/$libname.def'
      _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
	$ECHO EXPORTS >> $output_objdir/$libname.def~
	prefix_cmds="$SED"~
	if test EXPORTS = "`$SED 1q $export_symbols`"; then
	  prefix_cmds="$prefix_cmds -e 1d";
	fi~
	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
	emximp -o $lib $output_objdir/$libname.def'
      _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
      _LT_TAGVAR(file_list_spec, $1)='@'
      ;;

    interix[[3-9]]*)
      _LT_TAGVAR(hardcode_direct, $1)=no
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
      # Instead, shared libraries are loaded at an image base (0x10000000 by
      # default) and relocated if they conflict, which is a slow very memory
      # consuming and fragmenting process.  To avoid this, we pick a random,
      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
      _LT_TAGVAR(archive_expsym_cmds, $1)='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
      ;;

    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
      tmp_diet=no
      if test linux-dietlibc = "$host_os"; then
	case $cc_basename in
	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
	esac
      fi
      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
	 && test no = "$tmp_diet"
      then
	tmp_addflag=' $pic_flag'
	tmp_sharedflag='-shared'
	case $cc_basename,$host_cpu in
        pgcc*)				# Portland Group C compiler
	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
	  tmp_addflag=' $pic_flag'
	  ;;
	pgf77* | pgf90* | pgf95* | pgfortran*)
					# Portland Group f77 and f90 compilers
	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
	  tmp_addflag=' $pic_flag -Mnomain' ;;
	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
	  tmp_addflag=' -i_dynamic' ;;
	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
	  tmp_addflag=' -i_dynamic -nofor_main' ;;
	ifc* | ifort*)			# Intel Fortran compiler
	  tmp_addflag=' -nofor_main' ;;
	lf95*)				# Lahey Fortran 8.1
	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
	  tmp_sharedflag='--shared' ;;
        nagfor*)                        # NAGFOR 5.3
          tmp_sharedflag='-Wl,-shared' ;;
	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
	  tmp_sharedflag='-qmkshrobj'
	  tmp_addflag= ;;
	nvcc*)	# Cuda Compiler Driver 2.2
	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
	  _LT_TAGVAR(compiler_needs_object, $1)=yes
	  ;;
	esac
	case `$CC -V 2>&1 | $SED 5q` in
	*Sun\ C*)			# Sun C 5.9
	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
	  _LT_TAGVAR(compiler_needs_object, $1)=yes
	  tmp_sharedflag='-G' ;;
	*Sun\ F*)			# Sun Fortran 8.3
	  tmp_sharedflag='-G' ;;
	esac
	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'

        if test yes = "$supports_anon_versioning"; then
          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
            cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
            echo "local: *; };" >> $output_objdir/$libname.ver~
            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
        fi

	case $cc_basename in
	tcc*)
	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
	  ;;
	xlf* | bgf* | bgxlf* | mpixlf*)
	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
	  if test yes = "$supports_anon_versioning"; then
	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
              cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
              echo "local: *; };" >> $output_objdir/$libname.ver~
              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
	  fi
	  ;;
	esac
      else
        _LT_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;

    netbsd*)
      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
	wlarc=
      else
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
      fi
      ;;

    solaris*)
      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
	_LT_TAGVAR(ld_shlibs, $1)=no
	cat <<_LT_EOF 1>&2

*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems.  Therefore, libtool
*** is disabling shared libraries support.  We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer.  Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.

_LT_EOF
      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
      else
	_LT_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;

    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
      case `$LD -v 2>&1` in
        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
	_LT_TAGVAR(ld_shlibs, $1)=no
	cat <<_LT_EOF 1>&2

*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems.  Therefore, libtool
*** is disabling shared libraries support.  We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.

_LT_EOF
	;;
	*)
	  # For security reasons, it is highly recommended that you always
	  # use absolute paths for naming shared libraries, and exclude the
	  # DT_RUNPATH tag from executables and libraries.  But doing so
	  # requires that you compile everything twice, which is a pain.
	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
	  else
	    _LT_TAGVAR(ld_shlibs, $1)=no
	  fi
	;;
      esac
      ;;

    sunos4*)
      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
      wlarc=
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;

    *)
      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
      else
	_LT_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;
    esac

    if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
      runpath_var=
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
      _LT_TAGVAR(whole_archive_flag_spec, $1)=
    fi
  else
    # PORTME fill in a description of your system's linker (not GNU ld)
    case $host_os in
    aix3*)
      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
      _LT_TAGVAR(always_export_symbols, $1)=yes
      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
      # Note: this linker hardcodes the directories in LIBPATH if there
      # are no directories specified by -L.
      _LT_TAGVAR(hardcode_minus_L, $1)=yes
      if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
	# Neither direct hardcoding nor static linking is supported with a
	# broken collect2.
	_LT_TAGVAR(hardcode_direct, $1)=unsupported
      fi
      ;;

    aix[[4-9]]*)
      if test ia64 = "$host_cpu"; then
	# On IA64, the linker does run time linking by default, so we don't
	# have to do anything special.
	aix_use_runtimelinking=no
	exp_sym_flag='-Bexport'
	no_entry_flag=
      else
	# If we're using GNU nm, then we don't want the "-C" option.
	# -C means demangle to GNU nm, but means don't demangle to AIX nm.
	# Without the "-l" option, or with the "-B" option, AIX nm treats
	# weak defined symbols like other global defined symbols, whereas
	# GNU nm marks them as "W".
	# While the 'weak' keyword is ignored in the Export File, we need
	# it in the Import File for the 'aix-soname' feature, so we have
	# to replace the "-B" option with "-P" for AIX nm.
	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
	else
	  _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
	fi
	aix_use_runtimelinking=no

	# Test if we are trying to use run time linking or normal
	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
	# have runtime linking enabled, and use it for executables.
	# For shared libraries, we enable/disable runtime linking
	# depending on the kind of the shared library created -
	# when "with_aix_soname,aix_use_runtimelinking" is:
	# "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
	# "aix,yes"  lib.so          shared, rtl:yes, for executables
	#            lib.a           static archive
	# "both,no"  lib.so.V(shr.o) shared, rtl:yes
	#            lib.a(lib.so.V) shared, rtl:no,  for executables
	# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
	#            lib.a(lib.so.V) shared, rtl:no
	# "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
	#            lib.a           static archive
	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
	  for ld_flag in $LDFLAGS; do
	  if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
	    aix_use_runtimelinking=yes
	    break
	  fi
	  done
	  if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
	    # With aix-soname=svr4, we create the lib.so.V shared archives only,
	    # so we don't have lib.a shared libs to link our executables.
	    # We have to force runtime linking in this case.
	    aix_use_runtimelinking=yes
	    LDFLAGS="$LDFLAGS -Wl,-brtl"
	  fi
	  ;;
	esac

	exp_sym_flag='-bexport'
	no_entry_flag='-bnoentry'
      fi

      # When large executables or shared objects are built, AIX ld can
      # have problems creating the table of contents.  If linking a library
      # or program results in "error TOC overflow" add -mminimal-toc to
      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.

      _LT_TAGVAR(archive_cmds, $1)=''
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
      _LT_TAGVAR(link_all_deplibs, $1)=yes
      _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
      case $with_aix_soname,$aix_use_runtimelinking in
      aix,*) ;; # traditional, no import file
      svr4,* | *,yes) # use import file
	# The Import File defines what to hardcode.
	_LT_TAGVAR(hardcode_direct, $1)=no
	_LT_TAGVAR(hardcode_direct_absolute, $1)=no
	;;
      esac

      if test yes = "$GCC"; then
	case $host_os in aix4.[[012]]|aix4.[[012]].*)
	# We only want to do this on AIX 4.2 and lower, the check
	# below for broken collect2 doesn't work under 4.3+
	  collect2name=`$CC -print-prog-name=collect2`
	  if test -f "$collect2name" &&
	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
	  then
	  # We have reworked collect2
	  :
	  else
	  # We have old collect2
	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
	  # It fails to find uninstalled libraries when the uninstalled
	  # path is not listed in the libpath.  Setting hardcode_minus_L
	  # to unsupported forces relinking
	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
	  fi
	  ;;
	esac
	shared_flag='-shared'
	if test yes = "$aix_use_runtimelinking"; then
	  shared_flag="$shared_flag "'$wl-G'
	fi
	# Need to ensure runtime linking is disabled for the traditional
	# shared library, or the linker may eventually find shared libraries
	# /with/ Import File - we do not want to mix them.
	shared_flag_aix='-shared'
	shared_flag_svr4='-shared $wl-G'
      else
	# not using gcc
	if test ia64 = "$host_cpu"; then
	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
	# chokes on -Wl,-G. The following line is correct:
	  shared_flag='-G'
	else
	  if test yes = "$aix_use_runtimelinking"; then
	    shared_flag='$wl-G'
	  else
	    shared_flag='$wl-bM:SRE'
	  fi
	  shared_flag_aix='$wl-bM:SRE'
	  shared_flag_svr4='$wl-G'
	fi
      fi

      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
      # It seems that -bexpall does not export symbols beginning with
      # underscore (_), so it is better to generate a list of symbols to export.
      _LT_TAGVAR(always_export_symbols, $1)=yes
      if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
	# Warning - without using the other runtime loading flags (-brtl),
	# -berok will link without error, but may produce a broken library.
	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
        # Determine the default libpath from the value encoded in an
        # empty executable.
        _LT_SYS_MODULE_PATH_AIX([$1])
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
      else
	if test ia64 = "$host_cpu"; then
	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
	else
	 # Determine the default libpath from the value encoded in an
	 # empty executable.
	 _LT_SYS_MODULE_PATH_AIX([$1])
	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
	  # Warning - without using the other run time loading flags,
	  # -berok will link without error, but may produce a broken library.
	  _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
	  _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
	  if test yes = "$with_gnu_ld"; then
	    # We only use this code for GNU lds that support --whole-archive.
	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
	  else
	    # Exported symbols can be pulled into shared objects from archives
	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
	  fi
	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
	  _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
	  # -brtl affects multiple linker settings, -berok does not and is overridden later
	  compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
	  if test svr4 != "$with_aix_soname"; then
	    # This is similar to how AIX traditionally builds its shared libraries.
	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
	  fi
	  if test aix != "$with_aix_soname"; then
	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
	  else
	    # used by -dlpreopen to get the symbols
	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
	  fi
	  _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
	fi
      fi
      ;;

    amigaos*)
      case $host_cpu in
      powerpc)
            # see comment about AmigaOS4 .so support
            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
            _LT_TAGVAR(archive_expsym_cmds, $1)=''
        ;;
      m68k)
            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
            _LT_TAGVAR(hardcode_minus_L, $1)=yes
        ;;
      esac
      ;;

    bsdi[[45]]*)
      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
      ;;

    cygwin* | mingw* | pw32* | cegcc*)
      # When not using gcc, we currently assume that we are using
      # Microsoft Visual C++ or Intel C++ Compiler.
      # hardcode_libdir_flag_spec is actually meaningless, as there is
      # no search path for DLLs.
      case $cc_basename in
      cl* | icl*)
	# Native MSVC or ICC
	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
	_LT_TAGVAR(always_export_symbols, $1)=yes
	_LT_TAGVAR(file_list_spec, $1)='@'
	# Tell ltmain to make .lib files, not .a files.
	libext=lib
	# Tell ltmain to make .dll files, not .so files.
	shrext_cmds=.dll
	# FIXME: Setting linknames here is a bad hack.
	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
	_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
            cp "$export_symbols" "$output_objdir/$soname.def";
            echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
          else
            $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
          fi~
          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
          linknames='
	# The linker will not automatically build a static lib if we build a DLL.
	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
	_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
	# Don't use ranlib
	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
          lt_tool_outputfile="@TOOL_OUTPUT@"~
          case $lt_outputfile in
            *.exe|*.EXE) ;;
            *)
              lt_outputfile=$lt_outputfile.exe
              lt_tool_outputfile=$lt_tool_outputfile.exe
              ;;
          esac~
          if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
            $RM "$lt_outputfile.manifest";
          fi'
	;;
      *)
	# Assume MSVC and ICC wrapper
	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
	# Tell ltmain to make .lib files, not .a files.
	libext=lib
	# Tell ltmain to make .dll files, not .so files.
	shrext_cmds=.dll
	# FIXME: Setting linknames here is a bad hack.
	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
	# The linker will automatically build a .lib file if we build a DLL.
	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
	# FIXME: Should let the user specify the lib program.
	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
	;;
      esac
      ;;

    darwin* | rhapsody*)
      _LT_DARWIN_LINKER_FEATURES($1)
      ;;

    dgux*)
      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;

    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
    # support.  Future versions do this automatically, but an explicit c++rt0.o
    # does not break anything, and helps significantly (at the cost of a little
    # extra space).
    freebsd2.2*)
      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;

    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
    freebsd2.*)
      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_minus_L, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;

    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
    freebsd* | dragonfly* | midnightbsd*)
      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;

    hpux9*)
      if test yes = "$GCC"; then
	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
      else
	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
      fi
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
      _LT_TAGVAR(hardcode_direct, $1)=yes

      # hardcode_minus_L: Not really in the search PATH,
      # but as the default location of the library.
      _LT_TAGVAR(hardcode_minus_L, $1)=yes
      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
      ;;

    hpux10*)
      if test yes,no = "$GCC,$with_gnu_ld"; then
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
      else
	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
      fi
      if test no = "$with_gnu_ld"; then
	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
	_LT_TAGVAR(hardcode_direct, $1)=yes
	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
	# hardcode_minus_L: Not really in the search PATH,
	# but as the default location of the library.
	_LT_TAGVAR(hardcode_minus_L, $1)=yes
      fi
      ;;

    hpux11*)
      if test yes,no = "$GCC,$with_gnu_ld"; then
	case $host_cpu in
	hppa*64*)
	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
	  ;;
	ia64*)
	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
	  ;;
	*)
	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
	  ;;
	esac
      else
	case $host_cpu in
	hppa*64*)
	  _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
	  ;;
	ia64*)
	  _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
	  ;;
	*)
	m4_if($1, [], [
	  # Older versions of the 11.00 compiler do not understand -b yet
	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
	  _LT_LINKER_OPTION([if $CC understands -b],
	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
	  ;;
	esac
      fi
      if test no = "$with_gnu_ld"; then
	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
	_LT_TAGVAR(hardcode_libdir_separator, $1)=:

	case $host_cpu in
	hppa*64*|ia64*)
	  _LT_TAGVAR(hardcode_direct, $1)=no
	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
	  ;;
	*)
	  _LT_TAGVAR(hardcode_direct, $1)=yes
	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'

	  # hardcode_minus_L: Not really in the search PATH,
	  # but as the default location of the library.
	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
	  ;;
	esac
      fi
      ;;

    irix5* | irix6* | nonstopux*)
      if test yes = "$GCC"; then
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
	# Try to use the -exported_symbol ld option, if it does not
	# work, assume that -exports_file does not work either and
	# implicitly export all symbols.
	# This should be the same for all languages, so no per-tag cache variable.
	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
	  [lt_cv_irix_exported_symbol],
	  [save_LDFLAGS=$LDFLAGS
	   LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
	   AC_LINK_IFELSE(
	     [AC_LANG_SOURCE(
	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
			      [C++], [[int foo (void) { return 0; }]],
			      [Fortran 77], [[
      subroutine foo
      end]],
			      [Fortran], [[
      subroutine foo
      end]])])],
	      [lt_cv_irix_exported_symbol=yes],
	      [lt_cv_irix_exported_symbol=no])
           LDFLAGS=$save_LDFLAGS])
	if test yes = "$lt_cv_irix_exported_symbol"; then
          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
	fi
      else
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
      fi
      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
      _LT_TAGVAR(inherit_rpath, $1)=yes
      _LT_TAGVAR(link_all_deplibs, $1)=yes
      ;;

    linux*)
      case $cc_basename in
      tcc*)
	# Fabrice Bellard et al's Tiny C Compiler
	_LT_TAGVAR(ld_shlibs, $1)=yes
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
	;;
      esac
      ;;

    netbsd*)
      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
      else
	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
      fi
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;

    newsos6)
      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;

    *nto* | *qnx*)
      ;;

    openbsd* | bitrig*)
      if test -f /usr/libexec/ld.so; then
	_LT_TAGVAR(hardcode_direct, $1)=yes
	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
	else
	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
	fi
      else
	_LT_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;

    os2*)
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_TAGVAR(hardcode_minus_L, $1)=yes
      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
      shrext_cmds=.dll
      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
	$ECHO EXPORTS >> $output_objdir/$libname.def~
	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
	emximp -o $lib $output_objdir/$libname.def'
      _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
	$ECHO EXPORTS >> $output_objdir/$libname.def~
	prefix_cmds="$SED"~
	if test EXPORTS = "`$SED 1q $export_symbols`"; then
	  prefix_cmds="$prefix_cmds -e 1d";
	fi~
	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
	emximp -o $lib $output_objdir/$libname.def'
      _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
      _LT_TAGVAR(file_list_spec, $1)='@'
      ;;

    osf3*)
      if test yes = "$GCC"; then
	_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
      else
	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
      fi
      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
      ;;

    osf4* | osf5*)	# as osf3* with the addition of -msym flag
      if test yes = "$GCC"; then
	_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
      else
	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
          $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'

	# Both c and cxx compiler support -rpath directly
	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
      fi
      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
      ;;

    solaris*)
      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
      if test yes = "$GCC"; then
	wlarc='$wl'
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
          $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
      else
	case `$CC -V 2>&1` in
	*"Compilers 5.0"*)
	  wlarc=''
	  _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
            $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
	  ;;
	*)
	  wlarc='$wl'
	  _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
            $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
	  ;;
	esac
      fi
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      case $host_os in
      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
      *)
	# The compiler driver will combine and reorder linker options,
	# but understands '-z linker_flag'.  GCC discards it without '$wl',
	# but is careful enough not to reorder.
	# Supported since Solaris 2.6 (maybe 2.5.1?)
	if test yes = "$GCC"; then
	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
	else
	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
	fi
	;;
      esac
      _LT_TAGVAR(link_all_deplibs, $1)=yes
      ;;

    sunos4*)
      if test sequent = "$host_vendor"; then
	# Use $CC to link under sequent, because it throws in some extra .o
	# files that make .init and .fini sections work.
	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
      else
	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
      fi
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_minus_L, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;

    sysv4)
      case $host_vendor in
	sni)
	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
	;;
	siemens)
	  ## LD is ld it makes a PLAMLIB
	  ## CC just makes a GrossModule.
	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
	  _LT_TAGVAR(hardcode_direct, $1)=no
        ;;
	motorola)
	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
	;;
      esac
      runpath_var='LD_RUN_PATH'
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;

    sysv4.3*)
      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
      ;;

    sysv4*MP*)
      if test -d /usr/nec; then
	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
	runpath_var=LD_RUN_PATH
	hardcode_runpath_var=yes
	_LT_TAGVAR(ld_shlibs, $1)=yes
      fi
      ;;

    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      runpath_var='LD_RUN_PATH'

      if test yes = "$GCC"; then
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
      else
	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
      fi
      ;;

    sysv5* | sco3.2v5* | sco5v6*)
      # Note: We CANNOT use -z defs as we might desire, because we do not
      # link with -lc, and that would cause any symbols used from libc to
      # always be unresolved, which means just about no library would
      # ever link correctly.  If we're not using GNU ld we use -z text
      # though, which does catch some bad symbols but isn't as heavy-handed
      # as -z defs.
      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
      _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
      _LT_TAGVAR(link_all_deplibs, $1)=yes
      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
      runpath_var='LD_RUN_PATH'

      if test yes = "$GCC"; then
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
      else
	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
      fi
      ;;

    uts4*)
      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;

    *)
      _LT_TAGVAR(ld_shlibs, $1)=no
      ;;
    esac

    if test sni = "$host_vendor"; then
      case $host in
      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
	;;
      esac
    fi
  fi
])
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no

_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld

_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
_LT_DECL([], [extract_expsyms_cmds], [2],
    [The commands to extract the exported symbol list from a shared archive])

#
# Do we need to explicitly link libc?
#
case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
x|xyes)
  # Assume -lc should be added
  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes

  if test yes,yes = "$GCC,$enable_shared"; then
    case $_LT_TAGVAR(archive_cmds, $1) in
    *'~'*)
      # FIXME: we may have to deal with multi-command sequences.
      ;;
    '$CC '*)
      # Test whether the compiler implicitly links with -lc since on some
      # systems, -lgcc has to come before -lc. If gcc already passes -lc
      # to ld, don't add -lc before -lgcc.
      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
	[$RM conftest*
	echo "$lt_simple_compile_test_code" > conftest.$ac_ext

	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
	  soname=conftest
	  lib=conftest
	  libobjs=conftest.$ac_objext
	  deplibs=
	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
	  compiler_flags=-v
	  linker_flags=-v
	  verstring=
	  output_objdir=.
	  libname=conftest
	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
	  _LT_TAGVAR(allow_undefined_flag, $1)=
	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
	  then
	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
	  else
	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
	  fi
	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
	else
	  cat conftest.err 1>&5
	fi
	$RM conftest*
	])
      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
      ;;
    esac
  fi
  ;;
esac

_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
    [Whether or not to add -lc for building shared libraries])
_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
    [enable_shared_with_static_runtimes], [0],
    [Whether or not to disallow shared libs when runtime libs are static])
_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
    [Compiler flag to allow reflexive dlopens])
_LT_TAGDECL([], [whole_archive_flag_spec], [1],
    [Compiler flag to generate shared objects directly from archives])
_LT_TAGDECL([], [compiler_needs_object], [1],
    [Whether the compiler copes with passing no objects directly])
_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
    [Create an old-style archive from a shared archive])
_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
    [Create a temporary old-style archive to link instead of a shared archive])
_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
_LT_TAGDECL([], [archive_expsym_cmds], [2])
_LT_TAGDECL([], [module_cmds], [2],
    [Commands used to build a loadable module if different from building
    a shared archive.])
_LT_TAGDECL([], [module_expsym_cmds], [2])
_LT_TAGDECL([], [with_gnu_ld], [1],
    [Whether we are building with GNU ld or not])
_LT_TAGDECL([], [allow_undefined_flag], [1],
    [Flag that allows shared libraries with undefined symbols to be built])
_LT_TAGDECL([], [no_undefined_flag], [1],
    [Flag that enforces no undefined symbols])
_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
    [Flag to hardcode $libdir into a binary during linking.
    This must work even if $libdir does not exist])
_LT_TAGDECL([], [hardcode_libdir_separator], [1],
    [Whether we need a single "-rpath" flag with a separated argument])
_LT_TAGDECL([], [hardcode_direct], [0],
    [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
    DIR into the resulting binary])
_LT_TAGDECL([], [hardcode_direct_absolute], [0],
    [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
    DIR into the resulting binary and the resulting library dependency is
    "absolute", i.e impossible to change by setting $shlibpath_var if the
    library is relocated])
_LT_TAGDECL([], [hardcode_minus_L], [0],
    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
    into the resulting binary])
_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
    into the resulting binary])
_LT_TAGDECL([], [hardcode_automatic], [0],
    [Set to "yes" if building a shared library automatically hardcodes DIR
    into the library and all subsequent libraries and executables linked
    against it])
_LT_TAGDECL([], [inherit_rpath], [0],
    [Set to yes if linker adds runtime paths of dependent libraries
    to runtime path list])
_LT_TAGDECL([], [link_all_deplibs], [0],
    [Whether libtool must link a program against all its dependency libraries])
_LT_TAGDECL([], [always_export_symbols], [0],
    [Set to "yes" if exported symbols are required])
_LT_TAGDECL([], [export_symbols_cmds], [2],
    [The commands to list exported symbols])
_LT_TAGDECL([], [exclude_expsyms], [1],
    [Symbols that should not be listed in the preloaded symbols])
_LT_TAGDECL([], [include_expsyms], [1],
    [Symbols that must always be exported])
_LT_TAGDECL([], [prelink_cmds], [2],
    [Commands necessary for linking programs (against libraries) with templates])
_LT_TAGDECL([], [postlink_cmds], [2],
    [Commands necessary for finishing linking programs])
_LT_TAGDECL([], [file_list_spec], [1],
    [Specify filename containing input files])
dnl FIXME: Not yet implemented
dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
dnl    [Compiler flag to generate thread safe objects])
])# _LT_LINKER_SHLIBS


# _LT_LANG_C_CONFIG([TAG])
# ------------------------
# Ensure that the configuration variables for a C compiler are suitably
# defined.  These variables are subsequently used by _LT_CONFIG to write
# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_C_CONFIG],
[m4_require([_LT_DECL_EGREP])dnl
lt_save_CC=$CC
AC_LANG_PUSH(C)

# Source file extension for C test sources.
ac_ext=c

# Object file extension for compiled C test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext

# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"

# Code to be used in simple link tests
lt_simple_link_test_code='int main(){return(0);}'

_LT_TAG_COMPILER
# Save the default compiler, since it gets overwritten when the other
# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
compiler_DEFAULT=$CC

# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE

if test -n "$compiler"; then
  _LT_COMPILER_NO_RTTI($1)
  _LT_COMPILER_PIC($1)
  _LT_COMPILER_C_O($1)
  _LT_COMPILER_FILE_LOCKS($1)
  _LT_LINKER_SHLIBS($1)
  _LT_SYS_DYNAMIC_LINKER($1)
  _LT_LINKER_HARDCODE_LIBPATH($1)
  LT_SYS_DLOPEN_SELF
  _LT_CMD_STRIPLIB

  # Report what library types will actually be built
  AC_MSG_CHECKING([if libtool supports shared libraries])
  AC_MSG_RESULT([$can_build_shared])

  AC_MSG_CHECKING([whether to build shared libraries])
  test no = "$can_build_shared" && enable_shared=no

  # On AIX, shared libraries and static libraries use the same namespace, and
  # are all built from PIC.
  case $host_os in
  aix3*)
    test yes = "$enable_shared" && enable_static=no
    if test -n "$RANLIB"; then
      archive_cmds="$archive_cmds~\$RANLIB \$lib"
      postinstall_cmds='$RANLIB $lib'
    fi
    ;;

  aix[[4-9]]*)
    if test ia64 != "$host_cpu"; then
      case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
      yes,aix,yes) ;;			# shared object as lib.so file only
      yes,svr4,*) ;;			# shared object as lib.so archive member only
      yes,*) enable_static=no ;;	# shared object in lib.a archive as well
      esac
    fi
    ;;
  esac
  AC_MSG_RESULT([$enable_shared])

  AC_MSG_CHECKING([whether to build static libraries])
  # Make sure either enable_shared or enable_static is yes.
  test yes = "$enable_shared" || enable_static=yes
  AC_MSG_RESULT([$enable_static])

  _LT_CONFIG($1)
fi
AC_LANG_POP
CC=$lt_save_CC
])# _LT_LANG_C_CONFIG


# _LT_LANG_CXX_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a C++ compiler are suitably
# defined.  These variables are subsequently used by _LT_CONFIG to write
# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_CXX_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PATH_MANIFEST_TOOL])dnl
if test -n "$CXX" && ( test no != "$CXX" &&
    ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
    (test g++ != "$CXX"))); then
  AC_PROG_CXXCPP
else
  _lt_caught_CXX_error=yes
fi

AC_LANG_PUSH(C++)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(compiler_needs_object, $1)=no
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no

# Source file extension for C++ test sources.
ac_ext=cpp

# Object file extension for compiled C++ test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext

# No sense in running all these tests if we already determined that
# the CXX compiler isn't working.  Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test yes != "$_lt_caught_CXX_error"; then
  # Code to be used in simple compile tests
  lt_simple_compile_test_code="int some_variable = 0;"

  # Code to be used in simple link tests
  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'

  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
  _LT_TAG_COMPILER

  # save warnings/boilerplate of simple test code
  _LT_COMPILER_BOILERPLATE
  _LT_LINKER_BOILERPLATE

  # Allow CC to be a program name with arguments.
  lt_save_CC=$CC
  lt_save_CFLAGS=$CFLAGS
  lt_save_LD=$LD
  lt_save_GCC=$GCC
  GCC=$GXX
  lt_save_with_gnu_ld=$with_gnu_ld
  lt_save_path_LD=$lt_cv_path_LD
  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
  else
    $as_unset lt_cv_prog_gnu_ld
  fi
  if test -n "${lt_cv_path_LDCXX+set}"; then
    lt_cv_path_LD=$lt_cv_path_LDCXX
  else
    $as_unset lt_cv_path_LD
  fi
  test -z "${LDCXX+set}" || LD=$LDCXX
  CC=${CXX-"c++"}
  CFLAGS=$CXXFLAGS
  compiler=$CC
  _LT_TAGVAR(compiler, $1)=$CC
  _LT_CC_BASENAME([$compiler])

  if test -n "$compiler"; then
    # We don't want -fno-exception when compiling C++ code, so set the
    # no_builtin_flag separately
    if test yes = "$GXX"; then
      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
    else
      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
    fi

    if test yes = "$GXX"; then
      # Set up default GNU C++ configuration

      LT_PATH_LD

      # Check if GNU C++ uses GNU ld as the underlying linker, since the
      # archiving commands below assume that GNU ld is being used.
      if test yes = "$with_gnu_ld"; then
        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'

        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'

        # If archive_cmds runs LD, not CC, wlarc should be empty
        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
        #     investigate it a little bit more. (MM)
        wlarc='$wl'

        # ancient GNU ld didn't support --whole-archive et. al.
        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
	  $GREP 'no-whole-archive' > /dev/null; then
          _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
        else
          _LT_TAGVAR(whole_archive_flag_spec, $1)=
        fi
      else
        with_gnu_ld=no
        wlarc=

        # A generic and very simple default shared library creation
        # command for GNU C++ for the case where it uses the native
        # linker, instead of GNU ld.  If possible, this setting should
        # overridden to take advantage of the native linker features on
        # the platform it is being used on.
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
      fi

      # Commands to make compiler produce verbose output that lists
      # what "hidden" libraries, object files and flags are used when
      # linking a shared library.
      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'

    else
      GXX=no
      with_gnu_ld=no
      wlarc=
    fi

    # PORTME: fill in a description of your system's C++ link characteristics
    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
    _LT_TAGVAR(ld_shlibs, $1)=yes
    case $host_os in
      aix3*)
        # FIXME: insert proper C++ library support
        _LT_TAGVAR(ld_shlibs, $1)=no
        ;;
      aix[[4-9]]*)
        if test ia64 = "$host_cpu"; then
          # On IA64, the linker does run time linking by default, so we don't
          # have to do anything special.
          aix_use_runtimelinking=no
          exp_sym_flag='-Bexport'
          no_entry_flag=
        else
          aix_use_runtimelinking=no

          # Test if we are trying to use run time linking or normal
          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
          # have runtime linking enabled, and use it for executables.
          # For shared libraries, we enable/disable runtime linking
          # depending on the kind of the shared library created -
          # when "with_aix_soname,aix_use_runtimelinking" is:
          # "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
          # "aix,yes"  lib.so          shared, rtl:yes, for executables
          #            lib.a           static archive
          # "both,no"  lib.so.V(shr.o) shared, rtl:yes
          #            lib.a(lib.so.V) shared, rtl:no,  for executables
          # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
          #            lib.a(lib.so.V) shared, rtl:no
          # "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
          #            lib.a           static archive
          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
	    for ld_flag in $LDFLAGS; do
	      case $ld_flag in
	      *-brtl*)
	        aix_use_runtimelinking=yes
	        break
	        ;;
	      esac
	    done
	    if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
	      # With aix-soname=svr4, we create the lib.so.V shared archives only,
	      # so we don't have lib.a shared libs to link our executables.
	      # We have to force runtime linking in this case.
	      aix_use_runtimelinking=yes
	      LDFLAGS="$LDFLAGS -Wl,-brtl"
	    fi
	    ;;
          esac

          exp_sym_flag='-bexport'
          no_entry_flag='-bnoentry'
        fi

        # When large executables or shared objects are built, AIX ld can
        # have problems creating the table of contents.  If linking a library
        # or program results in "error TOC overflow" add -mminimal-toc to
        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.

        _LT_TAGVAR(archive_cmds, $1)=''
        _LT_TAGVAR(hardcode_direct, $1)=yes
        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
        _LT_TAGVAR(link_all_deplibs, $1)=yes
        _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
        case $with_aix_soname,$aix_use_runtimelinking in
        aix,*) ;;	# no import file
        svr4,* | *,yes) # use import file
          # The Import File defines what to hardcode.
          _LT_TAGVAR(hardcode_direct, $1)=no
          _LT_TAGVAR(hardcode_direct_absolute, $1)=no
          ;;
        esac

        if test yes = "$GXX"; then
          case $host_os in aix4.[[012]]|aix4.[[012]].*)
          # We only want to do this on AIX 4.2 and lower, the check
          # below for broken collect2 doesn't work under 4.3+
	  collect2name=`$CC -print-prog-name=collect2`
	  if test -f "$collect2name" &&
	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
	  then
	    # We have reworked collect2
	    :
	  else
	    # We have old collect2
	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
	    # It fails to find uninstalled libraries when the uninstalled
	    # path is not listed in the libpath.  Setting hardcode_minus_L
	    # to unsupported forces relinking
	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
	  fi
          esac
          shared_flag='-shared'
	  if test yes = "$aix_use_runtimelinking"; then
	    shared_flag=$shared_flag' $wl-G'
	  fi
	  # Need to ensure runtime linking is disabled for the traditional
	  # shared library, or the linker may eventually find shared libraries
	  # /with/ Import File - we do not want to mix them.
	  shared_flag_aix='-shared'
	  shared_flag_svr4='-shared $wl-G'
        else
          # not using gcc
          if test ia64 = "$host_cpu"; then
	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
	  # chokes on -Wl,-G. The following line is correct:
	  shared_flag='-G'
          else
	    if test yes = "$aix_use_runtimelinking"; then
	      shared_flag='$wl-G'
	    else
	      shared_flag='$wl-bM:SRE'
	    fi
	    shared_flag_aix='$wl-bM:SRE'
	    shared_flag_svr4='$wl-G'
          fi
        fi

        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
        # It seems that -bexpall does not export symbols beginning with
        # underscore (_), so it is better to generate a list of symbols to
	# export.
        _LT_TAGVAR(always_export_symbols, $1)=yes
	if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
          # Warning - without using the other runtime loading flags (-brtl),
          # -berok will link without error, but may produce a broken library.
          # The "-G" linker flag allows undefined symbols.
          _LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
          # Determine the default libpath from the value encoded in an empty
          # executable.
          _LT_SYS_MODULE_PATH_AIX([$1])
          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"

          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
        else
          if test ia64 = "$host_cpu"; then
	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
          else
	    # Determine the default libpath from the value encoded in an
	    # empty executable.
	    _LT_SYS_MODULE_PATH_AIX([$1])
	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
	    # Warning - without using the other run time loading flags,
	    # -berok will link without error, but may produce a broken library.
	    _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
	    _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
	    if test yes = "$with_gnu_ld"; then
	      # We only use this code for GNU lds that support --whole-archive.
	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
	    else
	      # Exported symbols can be pulled into shared objects from archives
	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
	    fi
	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
	    _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
	    # -brtl affects multiple linker settings, -berok does not and is overridden later
	    compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
	    if test svr4 != "$with_aix_soname"; then
	      # This is similar to how AIX traditionally builds its shared
	      # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
	    fi
	    if test aix != "$with_aix_soname"; then
	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
	    else
	      # used by -dlpreopen to get the symbols
	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
	    fi
	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
          fi
        fi
        ;;

      beos*)
	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
	  # support --undefined.  This deserves some investigation.  FIXME
	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
	else
	  _LT_TAGVAR(ld_shlibs, $1)=no
	fi
	;;

      chorus*)
        case $cc_basename in
          *)
	  # FIXME: insert proper C++ library support
	  _LT_TAGVAR(ld_shlibs, $1)=no
	  ;;
        esac
        ;;

      cygwin* | mingw* | pw32* | cegcc*)
	case $GXX,$cc_basename in
	,cl* | no,cl* | ,icl* | no,icl*)
	  # Native MSVC or ICC
	  # hardcode_libdir_flag_spec is actually meaningless, as there is
	  # no search path for DLLs.
	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
	  _LT_TAGVAR(always_export_symbols, $1)=yes
	  _LT_TAGVAR(file_list_spec, $1)='@'
	  # Tell ltmain to make .lib files, not .a files.
	  libext=lib
	  # Tell ltmain to make .dll files, not .so files.
	  shrext_cmds=.dll
	  # FIXME: Setting linknames here is a bad hack.
	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
	  _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
              cp "$export_symbols" "$output_objdir/$soname.def";
              echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
            else
              $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
            fi~
            $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
            linknames='
	  # The linker will not automatically build a static lib if we build a DLL.
	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
	  # Don't use ranlib
	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
            lt_tool_outputfile="@TOOL_OUTPUT@"~
            case $lt_outputfile in
              *.exe|*.EXE) ;;
              *)
                lt_outputfile=$lt_outputfile.exe
                lt_tool_outputfile=$lt_tool_outputfile.exe
                ;;
            esac~
            func_to_tool_file "$lt_outputfile"~
            if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
              $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
              $RM "$lt_outputfile.manifest";
            fi'
	  ;;
	*)
	  # g++
	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
	  # as there is no search path for DLLs.
	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
	  _LT_TAGVAR(always_export_symbols, $1)=no
	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes

	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
	    # If the export-symbols file already is a .def file, use it as
	    # is; otherwise, prepend EXPORTS...
	    _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
              cp $export_symbols $output_objdir/$soname.def;
            else
              echo EXPORTS > $output_objdir/$soname.def;
              cat $export_symbols >> $output_objdir/$soname.def;
            fi~
            $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
	  else
	    _LT_TAGVAR(ld_shlibs, $1)=no
	  fi
	  ;;
	esac
	;;
      darwin* | rhapsody*)
        _LT_DARWIN_LINKER_FEATURES($1)
	;;

      os2*)
	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
	_LT_TAGVAR(hardcode_minus_L, $1)=yes
	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
	shrext_cmds=.dll
	_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
	  $ECHO EXPORTS >> $output_objdir/$libname.def~
	  emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
	  emximp -o $lib $output_objdir/$libname.def'
	_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
	  $ECHO EXPORTS >> $output_objdir/$libname.def~
	  prefix_cmds="$SED"~
	  if test EXPORTS = "`$SED 1q $export_symbols`"; then
	    prefix_cmds="$prefix_cmds -e 1d";
	  fi~
	  prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
	  cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
	  emximp -o $lib $output_objdir/$libname.def'
	_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
	_LT_TAGVAR(file_list_spec, $1)='@'
	;;

      dgux*)
        case $cc_basename in
          ec++*)
	    # FIXME: insert proper C++ library support
	    _LT_TAGVAR(ld_shlibs, $1)=no
	    ;;
          ghcx*)
	    # Green Hills C++ Compiler
	    # FIXME: insert proper C++ library support
	    _LT_TAGVAR(ld_shlibs, $1)=no
	    ;;
          *)
	    # FIXME: insert proper C++ library support
	    _LT_TAGVAR(ld_shlibs, $1)=no
	    ;;
        esac
        ;;

      freebsd2.*)
        # C++ shared libraries reported to be fairly broken before
	# switch to ELF
        _LT_TAGVAR(ld_shlibs, $1)=no
        ;;

      freebsd-elf*)
        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
        ;;

      freebsd* | dragonfly* | midnightbsd*)
        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
        # conventions
        _LT_TAGVAR(ld_shlibs, $1)=yes
        ;;

      haiku*)
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
        _LT_TAGVAR(link_all_deplibs, $1)=yes
        ;;

      hpux9*)
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
        _LT_TAGVAR(hardcode_direct, $1)=yes
        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
				             # but as the default
				             # location of the library.

        case $cc_basename in
          CC*)
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
          aCC*)
            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
            # Commands to make compiler produce verbose output that lists
            # what "hidden" libraries, object files and flags are used when
            # linking a shared library.
            #
            # There doesn't appear to be a way to prevent this compiler from
            # explicitly linking system object files so we need to strip them
            # from the output so that they don't get included in the library
            # dependencies.
            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
            ;;
          *)
            if test yes = "$GXX"; then
              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
            else
              # FIXME: insert proper C++ library support
              _LT_TAGVAR(ld_shlibs, $1)=no
            fi
            ;;
        esac
        ;;

      hpux10*|hpux11*)
        if test no = "$with_gnu_ld"; then
	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:

          case $host_cpu in
            hppa*64*|ia64*)
              ;;
            *)
	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
              ;;
          esac
        fi
        case $host_cpu in
          hppa*64*|ia64*)
            _LT_TAGVAR(hardcode_direct, $1)=no
            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
            ;;
          *)
            _LT_TAGVAR(hardcode_direct, $1)=yes
            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
					         # but as the default
					         # location of the library.
            ;;
        esac

        case $cc_basename in
          CC*)
	    # FIXME: insert proper C++ library support
	    _LT_TAGVAR(ld_shlibs, $1)=no
	    ;;
          aCC*)
	    case $host_cpu in
	      hppa*64*)
	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
	        ;;
	      ia64*)
	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
	        ;;
	      *)
	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
	        ;;
	    esac
	    # Commands to make compiler produce verbose output that lists
	    # what "hidden" libraries, object files and flags are used when
	    # linking a shared library.
	    #
	    # There doesn't appear to be a way to prevent this compiler from
	    # explicitly linking system object files so we need to strip them
	    # from the output so that they don't get included in the library
	    # dependencies.
	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
	    ;;
          *)
	    if test yes = "$GXX"; then
	      if test no = "$with_gnu_ld"; then
	        case $host_cpu in
	          hppa*64*)
	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
	            ;;
	          ia64*)
	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
	            ;;
	          *)
	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
	            ;;
	        esac
	      fi
	    else
	      # FIXME: insert proper C++ library support
	      _LT_TAGVAR(ld_shlibs, $1)=no
	    fi
	    ;;
        esac
        ;;

      interix[[3-9]]*)
	_LT_TAGVAR(hardcode_direct, $1)=no
	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
	# Instead, shared libraries are loaded at an image base (0x10000000 by
	# default) and relocated if they conflict, which is a slow very memory
	# consuming and fragmenting process.  To avoid this, we pick a random,
	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
	_LT_TAGVAR(archive_expsym_cmds, $1)='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
	;;
      irix5* | irix6*)
        case $cc_basename in
          CC*)
	    # SGI C++
	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'

	    # Archives containing C++ object files must be created using
	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
	    # necessary to make sure instantiated templates are included
	    # in the archive.
	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
	    ;;
          *)
	    if test yes = "$GXX"; then
	      if test no = "$with_gnu_ld"; then
	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
	      else
	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
	      fi
	    fi
	    _LT_TAGVAR(link_all_deplibs, $1)=yes
	    ;;
        esac
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
        _LT_TAGVAR(inherit_rpath, $1)=yes
        ;;

      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
        case $cc_basename in
          KCC*)
	    # Kuck and Associates, Inc. (KAI) C++ Compiler

	    # KCC will only create a shared library if the output file
	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
	    # to its proper name (with version) after linking.
	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
	    # Commands to make compiler produce verbose output that lists
	    # what "hidden" libraries, object files and flags are used when
	    # linking a shared library.
	    #
	    # There doesn't appear to be a way to prevent this compiler from
	    # explicitly linking system object files so we need to strip them
	    # from the output so that they don't get included in the library
	    # dependencies.
	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'

	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'

	    # Archives containing C++ object files must be created using
	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
	    ;;
	  icpc* | ecpc* )
	    # Intel C++
	    with_gnu_ld=yes
	    # version 8.0 and above of icpc choke on multiply defined symbols
	    # if we add $predep_objects and $postdep_objects, however 7.1 and
	    # earlier do not add the objects themselves.
	    case `$CC -V 2>&1` in
	      *"Version 7."*)
	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
		;;
	      *)  # Version 8.0 or newer
	        tmp_idyn=
	        case $host_cpu in
		  ia64*) tmp_idyn=' -i_dynamic';;
		esac
	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
		;;
	    esac
	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
	    ;;
          pgCC* | pgcpp*)
            # Portland Group C++ compiler
	    case `$CC -V` in
	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
               rm -rf $tpldir~
               $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
               compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
                rm -rf $tpldir~
                $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
                $RANLIB $oldlib'
	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
                rm -rf $tpldir~
                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
                rm -rf $tpldir~
                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
	      ;;
	    *) # Version 6 and above use weak symbols
	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
	      ;;
	    esac

	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
            ;;
	  cxx*)
	    # Compaq C++
	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname  -o $lib $wl-retain-symbols-file $wl$export_symbols'

	    runpath_var=LD_RUN_PATH
	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:

	    # Commands to make compiler produce verbose output that lists
	    # what "hidden" libraries, object files and flags are used when
	    # linking a shared library.
	    #
	    # There doesn't appear to be a way to prevent this compiler from
	    # explicitly linking system object files so we need to strip them
	    # from the output so that they don't get included in the library
	    # dependencies.
	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
	    ;;
	  xl* | mpixl* | bgxl*)
	    # IBM XL 8.0 on PPC, with GNU ld
	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
	    if test yes = "$supports_anon_versioning"; then
	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
                cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
                echo "local: *; };" >> $output_objdir/$libname.ver~
                $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
	    fi
	    ;;
	  *)
	    case `$CC -V 2>&1 | $SED 5q` in
	    *Sun\ C*)
	      # Sun C++ 5.9
	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
	      _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
	      _LT_TAGVAR(compiler_needs_object, $1)=yes

	      # Not sure whether something based on
	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
	      # would be better.
	      output_verbose_link_cmd='func_echo_all'

	      # Archives containing C++ object files must be created using
	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
	      # necessary to make sure instantiated templates are included
	      # in the archive.
	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
	      ;;
	    esac
	    ;;
	esac
	;;

      lynxos*)
        # FIXME: insert proper C++ library support
	_LT_TAGVAR(ld_shlibs, $1)=no
	;;

      m88k*)
        # FIXME: insert proper C++ library support
        _LT_TAGVAR(ld_shlibs, $1)=no
	;;

      mvs*)
        case $cc_basename in
          cxx*)
	    # FIXME: insert proper C++ library support
	    _LT_TAGVAR(ld_shlibs, $1)=no
	    ;;
	  *)
	    # FIXME: insert proper C++ library support
	    _LT_TAGVAR(ld_shlibs, $1)=no
	    ;;
	esac
	;;

      netbsd*)
        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
	  wlarc=
	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
	  _LT_TAGVAR(hardcode_direct, $1)=yes
	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
	fi
	# Workaround some broken pre-1.5 toolchains
	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
	;;

      *nto* | *qnx*)
        _LT_TAGVAR(ld_shlibs, $1)=yes
	;;

      openbsd* | bitrig*)
	if test -f /usr/libexec/ld.so; then
	  _LT_TAGVAR(hardcode_direct, $1)=yes
	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
	    _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
	  fi
	  output_verbose_link_cmd=func_echo_all
	else
	  _LT_TAGVAR(ld_shlibs, $1)=no
	fi
	;;

      osf3* | osf4* | osf5*)
        case $cc_basename in
          KCC*)
	    # Kuck and Associates, Inc. (KAI) C++ Compiler

	    # KCC will only create a shared library if the output file
	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
	    # to its proper name (with version) after linking.
	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'

	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:

	    # Archives containing C++ object files must be created using
	    # the KAI C++ compiler.
	    case $host in
	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
	    esac
	    ;;
          RCC*)
	    # Rational C++ 2.4.1
	    # FIXME: insert proper C++ library support
	    _LT_TAGVAR(ld_shlibs, $1)=no
	    ;;
          cxx*)
	    case $host in
	      osf3*)
	        _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
		;;
	      *)
	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
                  echo "-hidden">> $lib.exp~
                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
                  $RM $lib.exp'
	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
		;;
	    esac

	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:

	    # Commands to make compiler produce verbose output that lists
	    # what "hidden" libraries, object files and flags are used when
	    # linking a shared library.
	    #
	    # There doesn't appear to be a way to prevent this compiler from
	    # explicitly linking system object files so we need to strip them
	    # from the output so that they don't get included in the library
	    # dependencies.
	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
	    ;;
	  *)
	    if test yes,no = "$GXX,$with_gnu_ld"; then
	      _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
	      case $host in
	        osf3*)
	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
		  ;;
	        *)
	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
		  ;;
	      esac

	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:

	      # Commands to make compiler produce verbose output that lists
	      # what "hidden" libraries, object files and flags are used when
	      # linking a shared library.
	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'

	    else
	      # FIXME: insert proper C++ library support
	      _LT_TAGVAR(ld_shlibs, $1)=no
	    fi
	    ;;
        esac
        ;;

      psos*)
        # FIXME: insert proper C++ library support
        _LT_TAGVAR(ld_shlibs, $1)=no
        ;;

      sunos4*)
        case $cc_basename in
          CC*)
	    # Sun C++ 4.x
	    # FIXME: insert proper C++ library support
	    _LT_TAGVAR(ld_shlibs, $1)=no
	    ;;
          lcc*)
	    # Lucid
	    # FIXME: insert proper C++ library support
	    _LT_TAGVAR(ld_shlibs, $1)=no
	    ;;
          *)
	    # FIXME: insert proper C++ library support
	    _LT_TAGVAR(ld_shlibs, $1)=no
	    ;;
        esac
        ;;

      solaris*)
        case $cc_basename in
          CC* | sunCC*)
	    # Sun C++ 4.2, 5.x and Centerline C++
            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
	    _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
              $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'

	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
	    case $host_os in
	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
	      *)
		# The compiler driver will combine and reorder linker options,
		# but understands '-z linker_flag'.
	        # Supported since Solaris 2.6 (maybe 2.5.1?)
		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
	        ;;
	    esac
	    _LT_TAGVAR(link_all_deplibs, $1)=yes

	    output_verbose_link_cmd='func_echo_all'

	    # Archives containing C++ object files must be created using
	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
	    # necessary to make sure instantiated templates are included
	    # in the archive.
	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
	    ;;
          gcx*)
	    # Green Hills C++ Compiler
	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'

	    # The C++ compiler must be used to create the archive.
	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
	    ;;
          *)
	    # GNU C++ compiler with Solaris linker
	    if test yes,no = "$GXX,$with_gnu_ld"; then
	      _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
                  $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'

	        # Commands to make compiler produce verbose output that lists
	        # what "hidden" libraries, object files and flags are used when
	        # linking a shared library.
	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
	      else
	        # g++ 2.7 appears to require '-G' NOT '-shared' on this
	        # platform.
	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
                  $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'

	        # Commands to make compiler produce verbose output that lists
	        # what "hidden" libraries, object files and flags are used when
	        # linking a shared library.
	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
	      fi

	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
	      case $host_os in
		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
		*)
		  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
		  ;;
	      esac
	    fi
	    ;;
        esac
        ;;

    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      runpath_var='LD_RUN_PATH'

      case $cc_basename in
        CC*)
	  _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
	  ;;
	*)
	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
	  ;;
      esac
      ;;

      sysv5* | sco3.2v5* | sco5v6*)
	# Note: We CANNOT use -z defs as we might desire, because we do not
	# link with -lc, and that would cause any symbols used from libc to
	# always be unresolved, which means just about no library would
	# ever link correctly.  If we're not using GNU ld we use -z text
	# though, which does catch some bad symbols but isn't as heavy-handed
	# as -z defs.
	_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
	_LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
	_LT_TAGVAR(link_all_deplibs, $1)=yes
	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
	runpath_var='LD_RUN_PATH'

	case $cc_basename in
          CC*)
	    _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
              '"$_LT_TAGVAR(old_archive_cmds, $1)"
	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
              '"$_LT_TAGVAR(reload_cmds, $1)"
	    ;;
	  *)
	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
	    ;;
	esac
      ;;

      tandem*)
        case $cc_basename in
          NCC*)
	    # NonStop-UX NCC 3.20
	    # FIXME: insert proper C++ library support
	    _LT_TAGVAR(ld_shlibs, $1)=no
	    ;;
          *)
	    # FIXME: insert proper C++ library support
	    _LT_TAGVAR(ld_shlibs, $1)=no
	    ;;
        esac
        ;;

      vxworks*)
        # FIXME: insert proper C++ library support
        _LT_TAGVAR(ld_shlibs, $1)=no
        ;;

      *)
        # FIXME: insert proper C++ library support
        _LT_TAGVAR(ld_shlibs, $1)=no
        ;;
    esac

    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
    test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no

    _LT_TAGVAR(GCC, $1)=$GXX
    _LT_TAGVAR(LD, $1)=$LD

    ## CAVEAT EMPTOR:
    ## There is no encapsulation within the following macros, do not change
    ## the running order or otherwise move them around unless you know exactly
    ## what you are doing...
    _LT_SYS_HIDDEN_LIBDEPS($1)
    _LT_COMPILER_PIC($1)
    _LT_COMPILER_C_O($1)
    _LT_COMPILER_FILE_LOCKS($1)
    _LT_LINKER_SHLIBS($1)
    _LT_SYS_DYNAMIC_LINKER($1)
    _LT_LINKER_HARDCODE_LIBPATH($1)

    _LT_CONFIG($1)
  fi # test -n "$compiler"

  CC=$lt_save_CC
  CFLAGS=$lt_save_CFLAGS
  LDCXX=$LD
  LD=$lt_save_LD
  GCC=$lt_save_GCC
  with_gnu_ld=$lt_save_with_gnu_ld
  lt_cv_path_LDCXX=$lt_cv_path_LD
  lt_cv_path_LD=$lt_save_path_LD
  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
fi # test yes != "$_lt_caught_CXX_error"

AC_LANG_POP
])# _LT_LANG_CXX_CONFIG


# _LT_FUNC_STRIPNAME_CNF
# ----------------------
# func_stripname_cnf prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
#
# This function is identical to the (non-XSI) version of func_stripname,
# except this one can be used by m4 code that may be executed by configure,
# rather than the libtool script.
m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
AC_REQUIRE([_LT_DECL_SED])
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
func_stripname_cnf ()
{
  case @S|@2 in
  .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
  *)  func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
  esac
} # func_stripname_cnf
])# _LT_FUNC_STRIPNAME_CNF


# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
# compiler output when linking a shared library.
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
# Dependencies to place before and after the object being linked:
_LT_TAGVAR(predep_objects, $1)=
_LT_TAGVAR(postdep_objects, $1)=
_LT_TAGVAR(predeps, $1)=
_LT_TAGVAR(postdeps, $1)=
_LT_TAGVAR(compiler_lib_search_path, $1)=

dnl we can't use the lt_simple_compile_test_code here,
dnl because it contains code intended for an executable,
dnl not a library.  It's possible we should let each
dnl tag define a new lt_????_link_test_code variable,
dnl but it's only used here...
m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
int a;
void foo (void) { a = 0; }
_LT_EOF
], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
class Foo
{
public:
  Foo (void) { a = 0; }
private:
  int a;
};
_LT_EOF
], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
      subroutine foo
      implicit none
      integer*4 a
      a=0
      return
      end
_LT_EOF
], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
      subroutine foo
      implicit none
      integer a
      a=0
      return
      end
_LT_EOF
], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
public class foo {
  private int a;
  public void bar (void) {
    a = 0;
  }
};
_LT_EOF
], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
package foo
func foo() {
}
_LT_EOF
])

_lt_libdeps_save_CFLAGS=$CFLAGS
case "$CC $CFLAGS " in #(
*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
esac

dnl Parse the compiler output and extract the necessary
dnl objects, libraries and library flags.
if AC_TRY_EVAL(ac_compile); then
  # Parse the compiler output and extract the necessary
  # objects, libraries and library flags.

  # Sentinel used to keep track of whether or not we are before
  # the conftest object file.
  pre_test_object_deps_done=no

  for p in `eval "$output_verbose_link_cmd"`; do
    case $prev$p in

    -L* | -R* | -l*)
       # Some compilers place space between "-{L,R}" and the path.
       # Remove the space.
       if test x-L = "$p" ||
          test x-R = "$p"; then
	 prev=$p
	 continue
       fi

       # Expand the sysroot to ease extracting the directories later.
       if test -z "$prev"; then
         case $p in
         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
         esac
       fi
       case $p in
       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
       esac
       if test no = "$pre_test_object_deps_done"; then
	 case $prev in
	 -L | -R)
	   # Internal compiler library paths should come after those
	   # provided the user.  The postdeps already come after the
	   # user supplied libs so there is no need to process them.
	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
	     _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
	   else
	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
	   fi
	   ;;
	 # The "-l" case would never come before the object being
	 # linked, so don't bother handling this case.
	 esac
       else
	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
	   _LT_TAGVAR(postdeps, $1)=$prev$p
	 else
	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
	 fi
       fi
       prev=
       ;;

    *.lto.$objext) ;; # Ignore GCC LTO objects
    *.$objext)
       # This assumes that the test object file only shows up
       # once in the compiler output.
       if test "$p" = "conftest.$objext"; then
	 pre_test_object_deps_done=yes
	 continue
       fi

       if test no = "$pre_test_object_deps_done"; then
	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
	   _LT_TAGVAR(predep_objects, $1)=$p
	 else
	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
	 fi
       else
	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
	   _LT_TAGVAR(postdep_objects, $1)=$p
	 else
	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
	 fi
       fi
       ;;

    *) ;; # Ignore the rest.

    esac
  done

  # Clean up.
  rm -f a.out a.exe
else
  echo "libtool.m4: error: problem compiling $1 test program"
fi

$RM -f confest.$objext
CFLAGS=$_lt_libdeps_save_CFLAGS

# PORTME: override above test on systems where it is broken
m4_if([$1], [CXX],
[case $host_os in
interix[[3-9]]*)
  # Interix 3.5 installs completely hosed .la files for C++, so rather than
  # hack all around it, let's just trust "g++" to DTRT.
  _LT_TAGVAR(predep_objects,$1)=
  _LT_TAGVAR(postdep_objects,$1)=
  _LT_TAGVAR(postdeps,$1)=
  ;;
esac
])

case " $_LT_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
 _LT_TAGVAR(compiler_lib_search_dirs, $1)=
if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
 _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
fi
_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
    [The directories searched by this compiler when creating a shared library])
_LT_TAGDECL([], [predep_objects], [1],
    [Dependencies to place before and after the objects being linked to
    create a shared library])
_LT_TAGDECL([], [postdep_objects], [1])
_LT_TAGDECL([], [predeps], [1])
_LT_TAGDECL([], [postdeps], [1])
_LT_TAGDECL([], [compiler_lib_search_path], [1],
    [The library search path used internally by the compiler when linking
    a shared library])
])# _LT_SYS_HIDDEN_LIBDEPS


# _LT_LANG_F77_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined.  These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
[AC_LANG_PUSH(Fortran 77)
if test -z "$F77" || test no = "$F77"; then
  _lt_disable_F77=yes
fi

_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no

# Source file extension for f77 test sources.
ac_ext=f

# Object file extension for compiled f77 test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext

# No sense in running all these tests if we already determined that
# the F77 compiler isn't working.  Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test yes != "$_lt_disable_F77"; then
  # Code to be used in simple compile tests
  lt_simple_compile_test_code="\
      subroutine t
      return
      end
"

  # Code to be used in simple link tests
  lt_simple_link_test_code="\
      program t
      end
"

  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
  _LT_TAG_COMPILER

  # save warnings/boilerplate of simple test code
  _LT_COMPILER_BOILERPLATE
  _LT_LINKER_BOILERPLATE

  # Allow CC to be a program name with arguments.
  lt_save_CC=$CC
  lt_save_GCC=$GCC
  lt_save_CFLAGS=$CFLAGS
  CC=${F77-"f77"}
  CFLAGS=$FFLAGS
  compiler=$CC
  _LT_TAGVAR(compiler, $1)=$CC
  _LT_CC_BASENAME([$compiler])
  GCC=$G77
  if test -n "$compiler"; then
    AC_MSG_CHECKING([if libtool supports shared libraries])
    AC_MSG_RESULT([$can_build_shared])

    AC_MSG_CHECKING([whether to build shared libraries])
    test no = "$can_build_shared" && enable_shared=no

    # On AIX, shared libraries and static libraries use the same namespace, and
    # are all built from PIC.
    case $host_os in
      aix3*)
        test yes = "$enable_shared" && enable_static=no
        if test -n "$RANLIB"; then
          archive_cmds="$archive_cmds~\$RANLIB \$lib"
          postinstall_cmds='$RANLIB $lib'
        fi
        ;;
      aix[[4-9]]*)
	if test ia64 != "$host_cpu"; then
	  case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
	  yes,aix,yes) ;;		# shared object as lib.so file only
	  yes,svr4,*) ;;		# shared object as lib.so archive member only
	  yes,*) enable_static=no ;;	# shared object in lib.a archive as well
	  esac
	fi
        ;;
    esac
    AC_MSG_RESULT([$enable_shared])

    AC_MSG_CHECKING([whether to build static libraries])
    # Make sure either enable_shared or enable_static is yes.
    test yes = "$enable_shared" || enable_static=yes
    AC_MSG_RESULT([$enable_static])

    _LT_TAGVAR(GCC, $1)=$G77
    _LT_TAGVAR(LD, $1)=$LD

    ## CAVEAT EMPTOR:
    ## There is no encapsulation within the following macros, do not change
    ## the running order or otherwise move them around unless you know exactly
    ## what you are doing...
    _LT_COMPILER_PIC($1)
    _LT_COMPILER_C_O($1)
    _LT_COMPILER_FILE_LOCKS($1)
    _LT_LINKER_SHLIBS($1)
    _LT_SYS_DYNAMIC_LINKER($1)
    _LT_LINKER_HARDCODE_LIBPATH($1)

    _LT_CONFIG($1)
  fi # test -n "$compiler"

  GCC=$lt_save_GCC
  CC=$lt_save_CC
  CFLAGS=$lt_save_CFLAGS
fi # test yes != "$_lt_disable_F77"

AC_LANG_POP
])# _LT_LANG_F77_CONFIG


# _LT_LANG_FC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined.  These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
[AC_LANG_PUSH(Fortran)

if test -z "$FC" || test no = "$FC"; then
  _lt_disable_FC=yes
fi

_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no

# Source file extension for fc test sources.
ac_ext=${ac_fc_srcext-f}

# Object file extension for compiled fc test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext

# No sense in running all these tests if we already determined that
# the FC compiler isn't working.  Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test yes != "$_lt_disable_FC"; then
  # Code to be used in simple compile tests
  lt_simple_compile_test_code="\
      subroutine t
      return
      end
"

  # Code to be used in simple link tests
  lt_simple_link_test_code="\
      program t
      end
"

  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
  _LT_TAG_COMPILER

  # save warnings/boilerplate of simple test code
  _LT_COMPILER_BOILERPLATE
  _LT_LINKER_BOILERPLATE

  # Allow CC to be a program name with arguments.
  lt_save_CC=$CC
  lt_save_GCC=$GCC
  lt_save_CFLAGS=$CFLAGS
  CC=${FC-"f95"}
  CFLAGS=$FCFLAGS
  compiler=$CC
  GCC=$ac_cv_fc_compiler_gnu

  _LT_TAGVAR(compiler, $1)=$CC
  _LT_CC_BASENAME([$compiler])

  if test -n "$compiler"; then
    AC_MSG_CHECKING([if libtool supports shared libraries])
    AC_MSG_RESULT([$can_build_shared])

    AC_MSG_CHECKING([whether to build shared libraries])
    test no = "$can_build_shared" && enable_shared=no

    # On AIX, shared libraries and static libraries use the same namespace, and
    # are all built from PIC.
    case $host_os in
      aix3*)
        test yes = "$enable_shared" && enable_static=no
        if test -n "$RANLIB"; then
          archive_cmds="$archive_cmds~\$RANLIB \$lib"
          postinstall_cmds='$RANLIB $lib'
        fi
        ;;
      aix[[4-9]]*)
	if test ia64 != "$host_cpu"; then
	  case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
	  yes,aix,yes) ;;		# shared object as lib.so file only
	  yes,svr4,*) ;;		# shared object as lib.so archive member only
	  yes,*) enable_static=no ;;	# shared object in lib.a archive as well
	  esac
	fi
        ;;
    esac
    AC_MSG_RESULT([$enable_shared])

    AC_MSG_CHECKING([whether to build static libraries])
    # Make sure either enable_shared or enable_static is yes.
    test yes = "$enable_shared" || enable_static=yes
    AC_MSG_RESULT([$enable_static])

    _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
    _LT_TAGVAR(LD, $1)=$LD

    ## CAVEAT EMPTOR:
    ## There is no encapsulation within the following macros, do not change
    ## the running order or otherwise move them around unless you know exactly
    ## what you are doing...
    _LT_SYS_HIDDEN_LIBDEPS($1)
    _LT_COMPILER_PIC($1)
    _LT_COMPILER_C_O($1)
    _LT_COMPILER_FILE_LOCKS($1)
    _LT_LINKER_SHLIBS($1)
    _LT_SYS_DYNAMIC_LINKER($1)
    _LT_LINKER_HARDCODE_LIBPATH($1)

    _LT_CONFIG($1)
  fi # test -n "$compiler"

  GCC=$lt_save_GCC
  CC=$lt_save_CC
  CFLAGS=$lt_save_CFLAGS
fi # test yes != "$_lt_disable_FC"

AC_LANG_POP
])# _LT_LANG_FC_CONFIG


# _LT_LANG_GCJ_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for the GNU Java Compiler compiler
# are suitably defined.  These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GCJ_CONFIG],
[AC_REQUIRE([LT_PROG_GCJ])dnl
AC_LANG_SAVE

# Source file extension for Java test sources.
ac_ext=java

# Object file extension for compiled Java test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext

# Code to be used in simple compile tests
lt_simple_compile_test_code="class foo {}"

# Code to be used in simple link tests
lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'

# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER

# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE

# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=yes
CC=${GCJ-"gcj"}
CFLAGS=$GCJFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])

# GCJ did not exist at the time GCC didn't implicitly link libc in.
_LT_TAGVAR(archive_cmds_need_lc, $1)=no

_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds

if test -n "$compiler"; then
  _LT_COMPILER_NO_RTTI($1)
  _LT_COMPILER_PIC($1)
  _LT_COMPILER_C_O($1)
  _LT_COMPILER_FILE_LOCKS($1)
  _LT_LINKER_SHLIBS($1)
  _LT_LINKER_HARDCODE_LIBPATH($1)

  _LT_CONFIG($1)
fi

AC_LANG_RESTORE

GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GCJ_CONFIG


# _LT_LANG_GO_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for the GNU Go compiler
# are suitably defined.  These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GO_CONFIG],
[AC_REQUIRE([LT_PROG_GO])dnl
AC_LANG_SAVE

# Source file extension for Go test sources.
ac_ext=go

# Object file extension for compiled Go test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext

# Code to be used in simple compile tests
lt_simple_compile_test_code="package main; func main() { }"

# Code to be used in simple link tests
lt_simple_link_test_code='package main; func main() { }'

# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER

# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE

# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=yes
CC=${GOC-"gccgo"}
CFLAGS=$GOFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])

# Go did not exist at the time GCC didn't implicitly link libc in.
_LT_TAGVAR(archive_cmds_need_lc, $1)=no

_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds

if test -n "$compiler"; then
  _LT_COMPILER_NO_RTTI($1)
  _LT_COMPILER_PIC($1)
  _LT_COMPILER_C_O($1)
  _LT_COMPILER_FILE_LOCKS($1)
  _LT_LINKER_SHLIBS($1)
  _LT_LINKER_HARDCODE_LIBPATH($1)

  _LT_CONFIG($1)
fi

AC_LANG_RESTORE

GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GO_CONFIG


# _LT_LANG_RC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for the Windows resource compiler
# are suitably defined.  These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_RC_CONFIG],
[AC_REQUIRE([LT_PROG_RC])dnl
AC_LANG_SAVE

# Source file extension for RC test sources.
ac_ext=rc

# Object file extension for compiled RC test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext

# Code to be used in simple compile tests
lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'

# Code to be used in simple link tests
lt_simple_link_test_code=$lt_simple_compile_test_code

# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER

# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE

# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=
CC=${RC-"windres"}
CFLAGS=
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes

if test -n "$compiler"; then
  :
  _LT_CONFIG($1)
fi

GCC=$lt_save_GCC
AC_LANG_RESTORE
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_RC_CONFIG


# LT_PROG_GCJ
# -----------
AC_DEFUN([LT_PROG_GCJ],
[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
    [AC_CHECK_TOOL(GCJ, gcj,)
      test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
      AC_SUBST(GCJFLAGS)])])[]dnl
])

# Old name:
AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_GCJ], [])


# LT_PROG_GO
# ----------
AC_DEFUN([LT_PROG_GO],
[AC_CHECK_TOOL(GOC, gccgo,)
])


# LT_PROG_RC
# ----------
AC_DEFUN([LT_PROG_RC],
[AC_CHECK_TOOL(RC, windres,)
])

# Old name:
AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_RC], [])


# _LT_DECL_EGREP
# --------------
# If we don't have a new enough Autoconf to choose the best grep
# available, choose the one first in the user's PATH.
m4_defun([_LT_DECL_EGREP],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_REQUIRE([AC_PROG_FGREP])dnl
test -z "$GREP" && GREP=grep
_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
_LT_DECL([], [EGREP], [1], [An ERE matcher])
_LT_DECL([], [FGREP], [1], [A literal string matcher])
dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
AC_SUBST([GREP])
])


# _LT_DECL_OBJDUMP
# --------------
# If we don't have a new enough Autoconf to choose the best objdump
# available, choose the one first in the user's PATH.
m4_defun([_LT_DECL_OBJDUMP],
[AC_CHECK_TOOL(OBJDUMP, objdump, false)
test -z "$OBJDUMP" && OBJDUMP=objdump
_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
AC_SUBST([OBJDUMP])
])

# _LT_DECL_DLLTOOL
# ----------------
# Ensure DLLTOOL variable is set.
m4_defun([_LT_DECL_DLLTOOL],
[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
test -z "$DLLTOOL" && DLLTOOL=dlltool
_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
AC_SUBST([DLLTOOL])
])

# _LT_DECL_FILECMD
# ----------------
# Check for a file(cmd) program that can be used to detect file type and magic
m4_defun([_LT_DECL_FILECMD],
[AC_CHECK_TOOL([FILECMD], [file], [:])
_LT_DECL([], [FILECMD], [1], [A file(cmd) program that detects file types])
])# _LD_DECL_FILECMD

# _LT_DECL_SED
# ------------
# Check for a fully-functional sed program, that truncates
# as few characters as possible.  Prefer GNU sed if found.
m4_defun([_LT_DECL_SED],
[AC_PROG_SED
test -z "$SED" && SED=sed
Xsed="$SED -e 1s/^X//"
_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
])# _LT_DECL_SED

m4_ifndef([AC_PROG_SED], [
# NOTE: This macro has been submitted for inclusion into   #
#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
#  a released version of Autoconf we should remove this    #
#  macro and use it instead.                               #

m4_defun([AC_PROG_SED],
[AC_MSG_CHECKING([for a sed that does not truncate output])
AC_CACHE_VAL(lt_cv_path_SED,
[# Loop through the user's path and test for sed and gsed.
# Then use that list of sed's as ones to test for truncation.
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for lt_ac_prog in sed gsed; do
    for ac_exec_ext in '' $ac_executable_extensions; do
      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
      fi
    done
  done
done
IFS=$as_save_IFS
lt_ac_max=0
lt_ac_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
  test ! -f "$lt_ac_sed" && continue
  cat /dev/null > conftest.in
  lt_ac_count=0
  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
  # Check for GNU sed and select it if it is found.
  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
    lt_cv_path_SED=$lt_ac_sed
    break
  fi
  while true; do
    cat conftest.in conftest.in >conftest.tmp
    mv conftest.tmp conftest.in
    cp conftest.in conftest.nl
    echo >>conftest.nl
    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
    cmp -s conftest.out conftest.nl || break
    # 10000 chars as input seems more than enough
    test 10 -lt "$lt_ac_count" && break
    lt_ac_count=`expr $lt_ac_count + 1`
    if test "$lt_ac_count" -gt "$lt_ac_max"; then
      lt_ac_max=$lt_ac_count
      lt_cv_path_SED=$lt_ac_sed
    fi
  done
done
])
SED=$lt_cv_path_SED
AC_SUBST([SED])
AC_MSG_RESULT([$SED])
])#AC_PROG_SED
])#m4_ifndef

# Old name:
AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_SED], [])


# _LT_CHECK_SHELL_FEATURES
# ------------------------
# Find out whether the shell is Bourne or XSI compatible,
# or has some other useful features.
m4_defun([_LT_CHECK_SHELL_FEATURES],
[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
  lt_unset=unset
else
  lt_unset=false
fi
_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl

# test EBCDIC or ASCII
case `echo X|tr X '\101'` in
 A) # ASCII based system
    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
  lt_SP2NL='tr \040 \012'
  lt_NL2SP='tr \015\012 \040\040'
  ;;
 *) # EBCDIC based system
  lt_SP2NL='tr \100 \n'
  lt_NL2SP='tr \r\n \100\100'
  ;;
esac
_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
])# _LT_CHECK_SHELL_FEATURES


# _LT_PATH_CONVERSION_FUNCTIONS
# -----------------------------
# Determine what file name conversion functions should be used by
# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
# for certain cross-compile configurations and native mingw.
m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_MSG_CHECKING([how to convert $build file names to $host format])
AC_CACHE_VAL(lt_cv_to_host_file_cmd,
[case $host in
  *-*-mingw* )
    case $build in
      *-*-mingw* ) # actually msys
        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
        ;;
      *-*-cygwin* )
        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
        ;;
      * ) # otherwise, assume *nix
        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
        ;;
    esac
    ;;
  *-*-cygwin* )
    case $build in
      *-*-mingw* ) # actually msys
        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
        ;;
      *-*-cygwin* )
        lt_cv_to_host_file_cmd=func_convert_file_noop
        ;;
      * ) # otherwise, assume *nix
        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
        ;;
    esac
    ;;
  * ) # unhandled hosts (and "normal" native builds)
    lt_cv_to_host_file_cmd=func_convert_file_noop
    ;;
esac
])
to_host_file_cmd=$lt_cv_to_host_file_cmd
AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
         [0], [convert $build file names to $host format])dnl

AC_MSG_CHECKING([how to convert $build file names to toolchain format])
AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
[#assume ordinary cross tools, or native build.
lt_cv_to_tool_file_cmd=func_convert_file_noop
case $host in
  *-*-mingw* )
    case $build in
      *-*-mingw* ) # actually msys
        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
        ;;
    esac
    ;;
esac
])
to_tool_file_cmd=$lt_cv_to_tool_file_cmd
AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
         [0], [convert $build files to toolchain format])dnl
])# _LT_PATH_CONVERSION_FUNCTIONS

# Helper functions for option handling.                    -*- Autoconf -*-
#
#   Copyright (C) 2004-2005, 2007-2009, 2011-2019, 2021-2022 Free
#   Software Foundation, Inc.
#   Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.

# serial 8 ltoptions.m4

# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])


# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
# ------------------------------------------
m4_define([_LT_MANGLE_OPTION],
[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])


# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
# ---------------------------------------
# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
# saved as a flag.
m4_define([_LT_SET_OPTION],
[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
        _LT_MANGLE_DEFUN([$1], [$2]),
    [m4_warning([Unknown $1 option '$2'])])[]dnl
])


# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
# ------------------------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
m4_define([_LT_IF_OPTION],
[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])


# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
# -------------------------------------------------------
# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
# are set.
m4_define([_LT_UNLESS_OPTIONS],
[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
		      [m4_define([$0_found])])])[]dnl
m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
])[]dnl
])


# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
# ----------------------------------------
# OPTION-LIST is a space-separated list of Libtool options associated
# with MACRO-NAME.  If any OPTION has a matching handler declared with
# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
# the unknown option and exit.
m4_defun([_LT_SET_OPTIONS],
[# Set options
m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
    [_LT_SET_OPTION([$1], _LT_Option)])

m4_if([$1],[LT_INIT],[
  dnl
  dnl Simply set some default values (i.e off) if boolean options were not
  dnl specified:
  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
  ])
  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
  ])
  dnl
  dnl If no reference was made to various pairs of opposing options, then
  dnl we run the default mode handler for the pair.  For example, if neither
  dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
  dnl archives by default:
  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
		   [_LT_ENABLE_FAST_INSTALL])
  _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
		   [_LT_WITH_AIX_SONAME([aix])])
  ])
])# _LT_SET_OPTIONS



# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
# -----------------------------------------
m4_define([_LT_MANGLE_DEFUN],
[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])


# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
# -----------------------------------------------
m4_define([LT_OPTION_DEFINE],
[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
])# LT_OPTION_DEFINE


# dlopen
# ------
LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
])

AU_DEFUN([AC_LIBTOOL_DLOPEN],
[_LT_SET_OPTION([LT_INIT], [dlopen])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
put the 'dlopen' option into LT_INIT's first parameter.])
])

dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])


# win32-dll
# ---------
# Declare package support for building win32 dll's.
LT_OPTION_DEFINE([LT_INIT], [win32-dll],
[enable_win32_dll=yes

case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
  AC_CHECK_TOOL(AS, as, false)
  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
  AC_CHECK_TOOL(OBJDUMP, objdump, false)
  ;;
esac

test -z "$AS" && AS=as
_LT_DECL([], [AS],      [1], [Assembler program])dnl

test -z "$DLLTOOL" && DLLTOOL=dlltool
_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl

test -z "$OBJDUMP" && OBJDUMP=objdump
_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
])# win32-dll

AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
_LT_SET_OPTION([LT_INIT], [win32-dll])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
put the 'win32-dll' option into LT_INIT's first parameter.])
])

dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])


# _LT_ENABLE_SHARED([DEFAULT])
# ----------------------------
# implement the --enable-shared flag, and supports the 'shared' and
# 'disable-shared' LT_INIT options.
# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_SHARED],
[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([shared],
    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
    [p=${PACKAGE-default}
    case $enableval in
    yes) enable_shared=yes ;;
    no) enable_shared=no ;;
    *)
      enable_shared=no
      # Look at the argument we got.  We use all the common list separators.
      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
      for pkg in $enableval; do
	IFS=$lt_save_ifs
	if test "X$pkg" = "X$p"; then
	  enable_shared=yes
	fi
      done
      IFS=$lt_save_ifs
      ;;
    esac],
    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)

    _LT_DECL([build_libtool_libs], [enable_shared], [0],
	[Whether or not to build shared libraries])
])# _LT_ENABLE_SHARED

LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])

# Old names:
AC_DEFUN([AC_ENABLE_SHARED],
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
])

AC_DEFUN([AC_DISABLE_SHARED],
[_LT_SET_OPTION([LT_INIT], [disable-shared])
])

AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])

dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_ENABLE_SHARED], [])
dnl AC_DEFUN([AM_DISABLE_SHARED], [])



# _LT_ENABLE_STATIC([DEFAULT])
# ----------------------------
# implement the --enable-static flag, and support the 'static' and
# 'disable-static' LT_INIT options.
# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_STATIC],
[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([static],
    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
    [p=${PACKAGE-default}
    case $enableval in
    yes) enable_static=yes ;;
    no) enable_static=no ;;
    *)
     enable_static=no
      # Look at the argument we got.  We use all the common list separators.
      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
      for pkg in $enableval; do
	IFS=$lt_save_ifs
	if test "X$pkg" = "X$p"; then
	  enable_static=yes
	fi
      done
      IFS=$lt_save_ifs
      ;;
    esac],
    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)

    _LT_DECL([build_old_libs], [enable_static], [0],
	[Whether or not to build static libraries])
])# _LT_ENABLE_STATIC

LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])

# Old names:
AC_DEFUN([AC_ENABLE_STATIC],
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
])

AC_DEFUN([AC_DISABLE_STATIC],
[_LT_SET_OPTION([LT_INIT], [disable-static])
])

AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])

dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_ENABLE_STATIC], [])
dnl AC_DEFUN([AM_DISABLE_STATIC], [])



# _LT_ENABLE_FAST_INSTALL([DEFAULT])
# ----------------------------------
# implement the --enable-fast-install flag, and support the 'fast-install'
# and 'disable-fast-install' LT_INIT options.
# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_FAST_INSTALL],
[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([fast-install],
    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
    [p=${PACKAGE-default}
    case $enableval in
    yes) enable_fast_install=yes ;;
    no) enable_fast_install=no ;;
    *)
      enable_fast_install=no
      # Look at the argument we got.  We use all the common list separators.
      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
      for pkg in $enableval; do
	IFS=$lt_save_ifs
	if test "X$pkg" = "X$p"; then
	  enable_fast_install=yes
	fi
      done
      IFS=$lt_save_ifs
      ;;
    esac],
    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)

_LT_DECL([fast_install], [enable_fast_install], [0],
	 [Whether or not to optimize for fast installation])dnl
])# _LT_ENABLE_FAST_INSTALL

LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])

# Old names:
AU_DEFUN([AC_ENABLE_FAST_INSTALL],
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
the 'fast-install' option into LT_INIT's first parameter.])
])

AU_DEFUN([AC_DISABLE_FAST_INSTALL],
[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
the 'disable-fast-install' option into LT_INIT's first parameter.])
])

dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])


# _LT_WITH_AIX_SONAME([DEFAULT])
# ----------------------------------
# implement the --with-aix-soname flag, and support the `aix-soname=aix'
# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
# is either `aix', `both' or `svr4'.  If omitted, it defaults to `aix'.
m4_define([_LT_WITH_AIX_SONAME],
[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
shared_archive_member_spec=
case $host,$enable_shared in
power*-*-aix[[5-9]]*,yes)
  AC_MSG_CHECKING([which variant of shared library versioning to provide])
  AC_ARG_WITH([aix-soname],
    [AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
      [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
    [case $withval in
    aix|svr4|both)
      ;;
    *)
      AC_MSG_ERROR([Unknown argument to --with-aix-soname])
      ;;
    esac
    lt_cv_with_aix_soname=$with_aix_soname],
    [AC_CACHE_VAL([lt_cv_with_aix_soname],
      [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
    with_aix_soname=$lt_cv_with_aix_soname])
  AC_MSG_RESULT([$with_aix_soname])
  if test aix != "$with_aix_soname"; then
    # For the AIX way of multilib, we name the shared archive member
    # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
    # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
    # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
    # the AIX toolchain works better with OBJECT_MODE set (default 32).
    if test 64 = "${OBJECT_MODE-32}"; then
      shared_archive_member_spec=shr_64
    else
      shared_archive_member_spec=shr
    fi
  fi
  ;;
*)
  with_aix_soname=aix
  ;;
esac

_LT_DECL([], [shared_archive_member_spec], [0],
    [Shared archive member basename, for filename based shared library versioning on AIX])dnl
])# _LT_WITH_AIX_SONAME

LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])


# _LT_WITH_PIC([MODE])
# --------------------
# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
# LT_INIT options.
# MODE is either 'yes' or 'no'.  If omitted, it defaults to 'both'.
m4_define([_LT_WITH_PIC],
[AC_ARG_WITH([pic],
    [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
    [lt_p=${PACKAGE-default}
    case $withval in
    yes|no) pic_mode=$withval ;;
    *)
      pic_mode=default
      # Look at the argument we got.  We use all the common list separators.
      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
      for lt_pkg in $withval; do
	IFS=$lt_save_ifs
	if test "X$lt_pkg" = "X$lt_p"; then
	  pic_mode=yes
	fi
      done
      IFS=$lt_save_ifs
      ;;
    esac],
    [pic_mode=m4_default([$1], [default])])

_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
])# _LT_WITH_PIC

LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])

# Old name:
AU_DEFUN([AC_LIBTOOL_PICMODE],
[_LT_SET_OPTION([LT_INIT], [pic-only])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
put the 'pic-only' option into LT_INIT's first parameter.])
])

dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])


m4_define([_LTDL_MODE], [])
LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
		 [m4_define([_LTDL_MODE], [nonrecursive])])
LT_OPTION_DEFINE([LTDL_INIT], [recursive],
		 [m4_define([_LTDL_MODE], [recursive])])
LT_OPTION_DEFINE([LTDL_INIT], [subproject],
		 [m4_define([_LTDL_MODE], [subproject])])

m4_define([_LTDL_TYPE], [])
LT_OPTION_DEFINE([LTDL_INIT], [installable],
		 [m4_define([_LTDL_TYPE], [installable])])
LT_OPTION_DEFINE([LTDL_INIT], [convenience],
		 [m4_define([_LTDL_TYPE], [convenience])])

# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
#
# Copyright (C) 2004-2005, 2007-2008, 2011-2019, 2021-2022 Free Software
# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.

# serial 6 ltsugar.m4

# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])


# lt_join(SEP, ARG1, [ARG2...])
# -----------------------------
# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
# associated separator.
# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
# versions in m4sugar had bugs.
m4_define([lt_join],
[m4_if([$#], [1], [],
       [$#], [2], [[$2]],
       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
m4_define([_lt_join],
[m4_if([$#$2], [2], [],
       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])


# lt_car(LIST)
# lt_cdr(LIST)
# ------------
# Manipulate m4 lists.
# These macros are necessary as long as will still need to support
# Autoconf-2.59, which quotes differently.
m4_define([lt_car], [[$1]])
m4_define([lt_cdr],
[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
       [$#], 1, [],
       [m4_dquote(m4_shift($@))])])
m4_define([lt_unquote], $1)


# lt_append(MACRO-NAME, STRING, [SEPARATOR])
# ------------------------------------------
# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
# Note that neither SEPARATOR nor STRING are expanded; they are appended
# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
# No SEPARATOR is output if MACRO-NAME was previously undefined (different
# than defined and empty).
#
# This macro is needed until we can rely on Autoconf 2.62, since earlier
# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
m4_define([lt_append],
[m4_define([$1],
	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])



# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
# ----------------------------------------------------------
# Produce a SEP delimited list of all paired combinations of elements of
# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
# has the form PREFIXmINFIXSUFFIXn.
# Needed until we can rely on m4_combine added in Autoconf 2.62.
m4_define([lt_combine],
[m4_if(m4_eval([$# > 3]), [1],
       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
[[m4_foreach([_Lt_prefix], [$2],
	     [m4_foreach([_Lt_suffix],
		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])


# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
# -----------------------------------------------------------------------
# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
m4_define([lt_if_append_uniq],
[m4_ifdef([$1],
	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
		 [lt_append([$1], [$2], [$3])$4],
		 [$5])],
	  [lt_append([$1], [$2], [$3])$4])])


# lt_dict_add(DICT, KEY, VALUE)
# -----------------------------
m4_define([lt_dict_add],
[m4_define([$1($2)], [$3])])


# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
# --------------------------------------------
m4_define([lt_dict_add_subkey],
[m4_define([$1($2:$3)], [$4])])


# lt_dict_fetch(DICT, KEY, [SUBKEY])
# ----------------------------------
m4_define([lt_dict_fetch],
[m4_ifval([$3],
	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])


# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
# -----------------------------------------------------------------
m4_define([lt_if_dict_fetch],
[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
	[$5],
    [$6])])


# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
# --------------------------------------------------------------
m4_define([lt_dict_filter],
[m4_if([$5], [], [],
  [lt_join(m4_quote(m4_default([$4], [[, ]])),
           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
])

# ltversion.m4 -- version numbers			-*- Autoconf -*-
#
#   Copyright (C) 2004, 2011-2019, 2021-2022 Free Software Foundation,
#   Inc.
#   Written by Scott James Remnant, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.

# @configure_input@

# serial 4245 ltversion.m4
# This file is part of GNU Libtool

m4_define([LT_PACKAGE_VERSION], [2.4.7])
m4_define([LT_PACKAGE_REVISION], [2.4.7])

AC_DEFUN([LTVERSION_VERSION],
[macro_version='2.4.7'
macro_revision='2.4.7'
_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
_LT_DECL(, macro_revision, 0)
])

# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
#
#   Copyright (C) 2004-2005, 2007, 2009, 2011-2019, 2021-2022 Free
#   Software Foundation, Inc.
#   Written by Scott James Remnant, 2004.
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.

# serial 5 lt~obsolete.m4

# These exist entirely to fool aclocal when bootstrapping libtool.
#
# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
# which have later been changed to m4_define as they aren't part of the
# exported API, or moved to Autoconf or Automake where they belong.
#
# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
# using a macro with the same name in our local m4/libtool.m4 it'll
# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
# and doesn't know about Autoconf macros at all.)
#
# So we provide this file, which has a silly filename so it's always
# included after everything else.  This provides aclocal with the
# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
# because those macros already exist, or will be overwritten later.
# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
#
# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
# Yes, that means every name once taken will need to remain here until
# we give up compatibility with versions before 1.7, at which point
# we need to keep only those names which we still refer to.

# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])

m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])

# pkg.m4 - Macros to locate and utilise pkg-config.   -*- Autoconf -*-
# serial 11 (pkg-config-0.29.1)

dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
dnl Copyright © 2012-2015 Dan Nicholson <dbn.lists@gmail.com>
dnl
dnl This program is free software; you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
dnl the Free Software Foundation; either version 2 of the License, or
dnl (at your option) any later version.
dnl
dnl This program is distributed in the hope that it will be useful, but
dnl WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl General Public License for more details.
dnl
dnl You should have received a copy of the GNU General Public License
dnl along with this program; if not, write to the Free Software
dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
dnl 02111-1307, USA.
dnl
dnl As a special exception to the GNU General Public License, if you
dnl distribute this file as part of a program that contains a
dnl configuration script generated by Autoconf, you may include it under
dnl the same distribution terms that you use for the rest of that
dnl program.

dnl PKG_PREREQ(MIN-VERSION)
dnl -----------------------
dnl Since: 0.29
dnl
dnl Verify that the version of the pkg-config macros are at least
dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's
dnl installed version of pkg-config, this checks the developer's version
dnl of pkg.m4 when generating configure.
dnl
dnl To ensure that this macro is defined, also add:
dnl m4_ifndef([PKG_PREREQ],
dnl     [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])])
dnl
dnl See the "Since" comment for each macro you use to see what version
dnl of the macros you require.
m4_defun([PKG_PREREQ],
[m4_define([PKG_MACROS_VERSION], [0.29.1])
m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
    [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])])
])dnl PKG_PREREQ

dnl PKG_PROG_PKG_CONFIG([MIN-VERSION])
dnl ----------------------------------
dnl Since: 0.16
dnl
dnl Search for the pkg-config tool and set the PKG_CONFIG variable to
dnl first found in the path. Checks that the version of pkg-config found
dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is
dnl used since that's the first version where most current features of
dnl pkg-config existed.
AC_DEFUN([PKG_PROG_PKG_CONFIG],
[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])

if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
fi
if test -n "$PKG_CONFIG"; then
	_pkg_min_version=m4_default([$1], [0.9.0])
	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
		AC_MSG_RESULT([yes])
	else
		AC_MSG_RESULT([no])
		PKG_CONFIG=""
	fi
fi[]dnl
])dnl PKG_PROG_PKG_CONFIG

dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
dnl -------------------------------------------------------------------
dnl Since: 0.18
dnl
dnl Check to see whether a particular set of modules exists. Similar to
dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
dnl
dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
dnl only at the first occurence in configure.ac, so if the first place
dnl it's called might be skipped (such as if it is within an "if", you
dnl have to call PKG_CHECK_EXISTS manually
AC_DEFUN([PKG_CHECK_EXISTS],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
if test -n "$PKG_CONFIG" && \
    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
  m4_default([$2], [:])
m4_ifvaln([$3], [else
  $3])dnl
fi])

dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
dnl ---------------------------------------------
dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting
dnl pkg_failed based on the result.
m4_define([_PKG_CONFIG],
[if test -n "$$1"; then
    pkg_cv_[]$1="$$1"
 elif test -n "$PKG_CONFIG"; then
    PKG_CHECK_EXISTS([$3],
                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
		      test "x$?" != "x0" && pkg_failed=yes ],
		     [pkg_failed=yes])
 else
    pkg_failed=untried
fi[]dnl
])dnl _PKG_CONFIG

dnl _PKG_SHORT_ERRORS_SUPPORTED
dnl ---------------------------
dnl Internal check to see if pkg-config supports short errors.
AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
        _pkg_short_errors_supported=yes
else
        _pkg_short_errors_supported=no
fi[]dnl
])dnl _PKG_SHORT_ERRORS_SUPPORTED


dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
dnl   [ACTION-IF-NOT-FOUND])
dnl --------------------------------------------------------------
dnl Since: 0.4.0
dnl
dnl Note that if there is a possibility the first call to
dnl PKG_CHECK_MODULES might not happen, you should be sure to include an
dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
AC_DEFUN([PKG_CHECK_MODULES],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl

pkg_failed=no
AC_MSG_CHECKING([for $1])

_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
_PKG_CONFIG([$1][_LIBS], [libs], [$2])

m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
and $1[]_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.])

if test $pkg_failed = yes; then
   	AC_MSG_RESULT([no])
        _PKG_SHORT_ERRORS_SUPPORTED
        if test $_pkg_short_errors_supported = yes; then
	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
        else 
	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
        fi
	# Put the nasty error message in config.log where it belongs
	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD

	m4_default([$4], [AC_MSG_ERROR(
[Package requirements ($2) were not met:

$$1_PKG_ERRORS

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

_PKG_TEXT])[]dnl
        ])
elif test $pkg_failed = untried; then
     	AC_MSG_RESULT([no])
	m4_default([$4], [AC_MSG_FAILURE(
[The pkg-config script could not be found or is too old.  Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.

_PKG_TEXT

To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
        ])
else
	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
        AC_MSG_RESULT([yes])
	$3
fi[]dnl
])dnl PKG_CHECK_MODULES


dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
dnl   [ACTION-IF-NOT-FOUND])
dnl ---------------------------------------------------------------------
dnl Since: 0.29
dnl
dnl Checks for existence of MODULES and gathers its build flags with
dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags
dnl and VARIABLE-PREFIX_LIBS from --libs.
dnl
dnl Note that if there is a possibility the first call to
dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to
dnl include an explicit call to PKG_PROG_PKG_CONFIG in your
dnl configure.ac.
AC_DEFUN([PKG_CHECK_MODULES_STATIC],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
_save_PKG_CONFIG=$PKG_CONFIG
PKG_CONFIG="$PKG_CONFIG --static"
PKG_CHECK_MODULES($@)
PKG_CONFIG=$_save_PKG_CONFIG[]dnl
])dnl PKG_CHECK_MODULES_STATIC


dnl PKG_INSTALLDIR([DIRECTORY])
dnl -------------------------
dnl Since: 0.27
dnl
dnl Substitutes the variable pkgconfigdir as the location where a module
dnl should install pkg-config .pc files. By default the directory is
dnl $libdir/pkgconfig, but the default can be changed by passing
dnl DIRECTORY. The user can override through the --with-pkgconfigdir
dnl parameter.
AC_DEFUN([PKG_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
m4_pushdef([pkg_description],
    [pkg-config installation directory @<:@]pkg_default[@:>@])
AC_ARG_WITH([pkgconfigdir],
    [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
    [with_pkgconfigdir=]pkg_default)
AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
])dnl PKG_INSTALLDIR


dnl PKG_NOARCH_INSTALLDIR([DIRECTORY])
dnl --------------------------------
dnl Since: 0.27
dnl
dnl Substitutes the variable noarch_pkgconfigdir as the location where a
dnl module should install arch-independent pkg-config .pc files. By
dnl default the directory is $datadir/pkgconfig, but the default can be
dnl changed by passing DIRECTORY. The user can override through the
dnl --with-noarch-pkgconfigdir parameter.
AC_DEFUN([PKG_NOARCH_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
m4_pushdef([pkg_description],
    [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
AC_ARG_WITH([noarch-pkgconfigdir],
    [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
    [with_noarch_pkgconfigdir=]pkg_default)
AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
])dnl PKG_NOARCH_INSTALLDIR


dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
dnl -------------------------------------------
dnl Since: 0.28
dnl
dnl Retrieves the value of the pkg-config variable for the given module.
AC_DEFUN([PKG_CHECK_VAR],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl

_PKG_CONFIG([$1], [variable="][$3]["], [$2])
AS_VAR_COPY([$1], [pkg_cv_][$1])

AS_VAR_IF([$1], [""], [$5], [$4])dnl
])dnl PKG_CHECK_VAR

dnl PKG_WITH_MODULES(VARIABLE-PREFIX, MODULES,
dnl   [ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND],
dnl   [DESCRIPTION], [DEFAULT])
dnl ------------------------------------------
dnl
dnl Prepare a "--with-" configure option using the lowercase
dnl [VARIABLE-PREFIX] name, merging the behaviour of AC_ARG_WITH and
dnl PKG_CHECK_MODULES in a single macro.
AC_DEFUN([PKG_WITH_MODULES],
[
m4_pushdef([with_arg], m4_tolower([$1]))

m4_pushdef([description],
           [m4_default([$5], [build with ]with_arg[ support])])

m4_pushdef([def_arg], [m4_default([$6], [auto])])
m4_pushdef([def_action_if_found], [AS_TR_SH([with_]with_arg)=yes])
m4_pushdef([def_action_if_not_found], [AS_TR_SH([with_]with_arg)=no])

m4_case(def_arg,
            [yes],[m4_pushdef([with_without], [--without-]with_arg)],
            [m4_pushdef([with_without],[--with-]with_arg)])

AC_ARG_WITH(with_arg,
     AS_HELP_STRING(with_without, description[ @<:@default=]def_arg[@:>@]),,
    [AS_TR_SH([with_]with_arg)=def_arg])

AS_CASE([$AS_TR_SH([with_]with_arg)],
            [yes],[PKG_CHECK_MODULES([$1],[$2],$3,$4)],
            [auto],[PKG_CHECK_MODULES([$1],[$2],
                                        [m4_n([def_action_if_found]) $3],
                                        [m4_n([def_action_if_not_found]) $4])])

m4_popdef([with_arg])
m4_popdef([description])
m4_popdef([def_arg])

])dnl PKG_WITH_MODULES

dnl PKG_HAVE_WITH_MODULES(VARIABLE-PREFIX, MODULES,
dnl   [DESCRIPTION], [DEFAULT])
dnl -----------------------------------------------
dnl
dnl Convenience macro to trigger AM_CONDITIONAL after PKG_WITH_MODULES
dnl check._[VARIABLE-PREFIX] is exported as make variable.
AC_DEFUN([PKG_HAVE_WITH_MODULES],
[
PKG_WITH_MODULES([$1],[$2],,,[$3],[$4])

AM_CONDITIONAL([HAVE_][$1],
               [test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"])
])dnl PKG_HAVE_WITH_MODULES

dnl PKG_HAVE_DEFINE_WITH_MODULES(VARIABLE-PREFIX, MODULES,
dnl   [DESCRIPTION], [DEFAULT])
dnl ------------------------------------------------------
dnl
dnl Convenience macro to run AM_CONDITIONAL and AC_DEFINE after
dnl PKG_WITH_MODULES check. HAVE_[VARIABLE-PREFIX] is exported as make
dnl and preprocessor variable.
AC_DEFUN([PKG_HAVE_DEFINE_WITH_MODULES],
[
PKG_HAVE_WITH_MODULES([$1],[$2],[$3],[$4])

AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"],
        [AC_DEFINE([HAVE_][$1], 1, [Enable ]m4_tolower([$1])[ support])])
])dnl PKG_HAVE_DEFINE_WITH_MODULES

dnl xorg-macros.m4.  Generated from xorg-macros.m4.in xorgversion.m4 by configure.
dnl
dnl Copyright (c) 2005, 2015, Oracle and/or its affiliates. All rights reserved.
dnl
dnl Permission is hereby granted, free of charge, to any person obtaining a
dnl copy of this software and associated documentation files (the "Software"),
dnl to deal in the Software without restriction, including without limitation
dnl the rights to use, copy, modify, merge, publish, distribute, sublicense,
dnl and/or sell copies of the Software, and to permit persons to whom the
dnl Software is furnished to do so, subject to the following conditions:
dnl
dnl The above copyright notice and this permission notice (including the next
dnl paragraph) shall be included in all copies or substantial portions of the
dnl Software.
dnl
dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
dnl IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
dnl FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
dnl THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
dnl LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
dnl FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
dnl DEALINGS IN THE SOFTWARE.

# XORG_MACROS_VERSION(required-version)
# -------------------------------------
# Minimum version: 1.1.0
#
# If you're using a macro added in Version 1.1 or newer, include this in
# your configure.ac with the minimum required version, such as:
# XORG_MACROS_VERSION(1.1)
#
# To ensure that this macro is defined, also add:
# m4_ifndef([XORG_MACROS_VERSION],
#     [m4_fatal([must install xorg-macros 1.1 or later before running autoconf/autogen])])
#
#
# See the "minimum version" comment for each macro you use to see what
# version you require.
m4_defun([XORG_MACROS_VERSION],[
m4_define([vers_have], [1.19.3])
m4_define([maj_have], m4_substr(vers_have, 0, m4_index(vers_have, [.])))
m4_define([maj_needed], m4_substr([$1], 0, m4_index([$1], [.])))
m4_if(m4_cmp(maj_have, maj_needed), 0,,
    [m4_fatal([xorg-macros major version ]maj_needed[ is required but ]vers_have[ found])])
m4_if(m4_version_compare(vers_have, [$1]), -1,
    [m4_fatal([xorg-macros version $1 or higher is required but ]vers_have[ found])])
m4_undefine([vers_have])
m4_undefine([maj_have])
m4_undefine([maj_needed])
]) # XORG_MACROS_VERSION

# XORG_PROG_RAWCPP()
# ------------------
# Minimum version: 1.0.0
#
# Find cpp program and necessary flags for use in pre-processing text files
# such as man pages and config files
AC_DEFUN([XORG_PROG_RAWCPP],[
AC_REQUIRE([AC_PROG_CPP])
AC_PATH_TOOL(RAWCPP, [cpp], [${CPP}],
   [$PATH:/bin:/usr/bin:/usr/lib:/usr/libexec:/usr/ccs/lib:/usr/ccs/lbin:/lib])

# Check for flag to avoid builtin definitions - assumes unix is predefined,
# which is not the best choice for supporting other OS'es, but covers most
# of the ones we need for now.
AC_MSG_CHECKING([if $RAWCPP requires -undef])
AC_LANG_CONFTEST([AC_LANG_SOURCE([[Does cpp redefine unix ?]])])
if test `${RAWCPP} < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
	AC_MSG_RESULT([no])
else
	if test `${RAWCPP} -undef < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
		RAWCPPFLAGS=-undef
		AC_MSG_RESULT([yes])
	# under Cygwin unix is still defined even with -undef
	elif test `${RAWCPP} -undef -ansi < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
		RAWCPPFLAGS="-undef -ansi"
		AC_MSG_RESULT([yes, with -ansi])
	else
		AC_MSG_ERROR([${RAWCPP} defines unix with or without -undef.  I don't know what to do.])
	fi
fi
rm -f conftest.$ac_ext

AC_MSG_CHECKING([if $RAWCPP requires -traditional])
AC_LANG_CONFTEST([AC_LANG_SOURCE([[Does cpp preserve   "whitespace"?]])])
if test `${RAWCPP} < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
	AC_MSG_RESULT([no])
else
	if test `${RAWCPP} -traditional < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
		TRADITIONALCPPFLAGS="-traditional"
		RAWCPPFLAGS="${RAWCPPFLAGS} -traditional"
		AC_MSG_RESULT([yes])
	else
		AC_MSG_ERROR([${RAWCPP} does not preserve whitespace with or without -traditional.  I don't know what to do.])
	fi
fi
rm -f conftest.$ac_ext
AC_SUBST(RAWCPPFLAGS)
AC_SUBST(TRADITIONALCPPFLAGS)
]) # XORG_PROG_RAWCPP

# XORG_MANPAGE_SECTIONS()
# -----------------------
# Minimum version: 1.0.0
#
# Determine which sections man pages go in for the different man page types
# on this OS - replaces *ManSuffix settings in old Imake *.cf per-os files.
# Not sure if there's any better way than just hardcoding by OS name.
# Override default settings by setting environment variables
# Added MAN_SUBSTS in version 1.8
# Added AC_PROG_SED in version 1.8

AC_DEFUN([XORG_MANPAGE_SECTIONS],[
AC_REQUIRE([AC_CANONICAL_HOST])
AC_REQUIRE([AC_PROG_SED])

case $host_os in
    solaris*)
        # Solaris 2.0 - 11.3 use SysV man page section numbers, so we
        # check for a man page file found in later versions that use
        # traditional section numbers instead
        AC_CHECK_FILE([/usr/share/man/man7/attributes.7],
                [SYSV_MAN_SECTIONS=false], [SYSV_MAN_SECTIONS=true])
        ;;
    *) SYSV_MAN_SECTIONS=false ;;
esac

if test x$APP_MAN_SUFFIX = x    ; then
    APP_MAN_SUFFIX=1
fi
if test x$APP_MAN_DIR = x    ; then
    APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)'
fi

if test x$LIB_MAN_SUFFIX = x    ; then
    LIB_MAN_SUFFIX=3
fi
if test x$LIB_MAN_DIR = x    ; then
    LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)'
fi

if test x$FILE_MAN_SUFFIX = x    ; then
    case $SYSV_MAN_SECTIONS in
	true)				FILE_MAN_SUFFIX=4  ;;
	*)				FILE_MAN_SUFFIX=5  ;;
    esac
fi
if test x$FILE_MAN_DIR = x    ; then
    FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)'
fi

if test x$MISC_MAN_SUFFIX = x    ; then
    case $SYSV_MAN_SECTIONS in
	true)				MISC_MAN_SUFFIX=5  ;;
	*)				MISC_MAN_SUFFIX=7  ;;
    esac
fi
if test x$MISC_MAN_DIR = x    ; then
    MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)'
fi

if test x$DRIVER_MAN_SUFFIX = x    ; then
    case $SYSV_MAN_SECTIONS in
	true)				DRIVER_MAN_SUFFIX=7  ;;
	*)				DRIVER_MAN_SUFFIX=4  ;;
    esac
fi
if test x$DRIVER_MAN_DIR = x    ; then
    DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)'
fi

if test x$ADMIN_MAN_SUFFIX = x    ; then
    case $SYSV_MAN_SECTIONS in
	true)				ADMIN_MAN_SUFFIX=1m ;;
	*)				ADMIN_MAN_SUFFIX=8  ;;
    esac
fi
if test x$ADMIN_MAN_DIR = x    ; then
    ADMIN_MAN_DIR='$(mandir)/man$(ADMIN_MAN_SUFFIX)'
fi


AC_SUBST([APP_MAN_SUFFIX])
AC_SUBST([LIB_MAN_SUFFIX])
AC_SUBST([FILE_MAN_SUFFIX])
AC_SUBST([MISC_MAN_SUFFIX])
AC_SUBST([DRIVER_MAN_SUFFIX])
AC_SUBST([ADMIN_MAN_SUFFIX])
AC_SUBST([APP_MAN_DIR])
AC_SUBST([LIB_MAN_DIR])
AC_SUBST([FILE_MAN_DIR])
AC_SUBST([MISC_MAN_DIR])
AC_SUBST([DRIVER_MAN_DIR])
AC_SUBST([ADMIN_MAN_DIR])

XORG_MAN_PAGE="X Version 11"
AC_SUBST([XORG_MAN_PAGE])
MAN_SUBSTS="\
	-e 's|__vendorversion__|\"\$(PACKAGE_STRING)\" \"\$(XORG_MAN_PAGE)\"|' \
	-e 's|__xorgversion__|\"\$(PACKAGE_STRING)\" \"\$(XORG_MAN_PAGE)\"|' \
	-e 's|__xservername__|Xorg|g' \
	-e 's|__xconfigfile__|xorg.conf|g' \
	-e 's|__projectroot__|\$(prefix)|g' \
	-e 's|__apploaddir__|\$(appdefaultdir)|g' \
	-e 's|__appmansuffix__|\$(APP_MAN_SUFFIX)|g' \
	-e 's|__drivermansuffix__|\$(DRIVER_MAN_SUFFIX)|g' \
	-e 's|__adminmansuffix__|\$(ADMIN_MAN_SUFFIX)|g' \
	-e 's|__libmansuffix__|\$(LIB_MAN_SUFFIX)|g' \
	-e 's|__miscmansuffix__|\$(MISC_MAN_SUFFIX)|g' \
	-e 's|__filemansuffix__|\$(FILE_MAN_SUFFIX)|g'"
AC_SUBST([MAN_SUBSTS])

]) # XORG_MANPAGE_SECTIONS

# XORG_CHECK_SGML_DOCTOOLS([MIN-VERSION])
# ------------------------
# Minimum version: 1.7.0
#
# Defines the variable XORG_SGML_PATH containing the location of X11/defs.ent
# provided by xorg-sgml-doctools, if installed.
AC_DEFUN([XORG_CHECK_SGML_DOCTOOLS],[
AC_MSG_CHECKING([for X.Org SGML entities m4_ifval([$1],[>= $1])])
XORG_SGML_PATH=
PKG_CHECK_EXISTS([xorg-sgml-doctools m4_ifval([$1],[>= $1])],
    [XORG_SGML_PATH=`$PKG_CONFIG --variable=sgmlrootdir xorg-sgml-doctools`],
    [m4_ifval([$1],[:],
        [if test x"$cross_compiling" != x"yes" ; then
            AC_CHECK_FILE([$prefix/share/sgml/X11/defs.ent],
                          [XORG_SGML_PATH=$prefix/share/sgml])
         fi])
    ])

# Define variables STYLESHEET_SRCDIR and XSL_STYLESHEET containing
# the path and the name of the doc stylesheet
if test "x$XORG_SGML_PATH" != "x" ; then
   AC_MSG_RESULT([$XORG_SGML_PATH])
   STYLESHEET_SRCDIR=$XORG_SGML_PATH/X11
   XSL_STYLESHEET=$STYLESHEET_SRCDIR/xorg.xsl
else
   AC_MSG_RESULT([no])
fi

AC_SUBST(XORG_SGML_PATH)
AC_SUBST(STYLESHEET_SRCDIR)
AC_SUBST(XSL_STYLESHEET)
AM_CONDITIONAL([HAVE_STYLESHEETS], [test "x$XSL_STYLESHEET" != "x"])
]) # XORG_CHECK_SGML_DOCTOOLS

# XORG_CHECK_LINUXDOC
# -------------------
# Minimum version: 1.0.0
#
# Defines the variable MAKE_TEXT if the necessary tools and
# files are found. $(MAKE_TEXT) blah.sgml will then produce blah.txt.
# Whether or not the necessary tools and files are found can be checked
# with the AM_CONDITIONAL "BUILD_LINUXDOC"
AC_DEFUN([XORG_CHECK_LINUXDOC],[
AC_REQUIRE([XORG_CHECK_SGML_DOCTOOLS])
AC_REQUIRE([XORG_WITH_PS2PDF])

AC_PATH_PROG(LINUXDOC, linuxdoc)

AC_MSG_CHECKING([whether to build documentation])

if test x$XORG_SGML_PATH != x && test x$LINUXDOC != x ; then
   BUILDDOC=yes
else
   BUILDDOC=no
fi

AM_CONDITIONAL(BUILD_LINUXDOC, [test x$BUILDDOC = xyes])

AC_MSG_RESULT([$BUILDDOC])

AC_MSG_CHECKING([whether to build pdf documentation])

if test x$have_ps2pdf != xno && test x$BUILD_PDFDOC != xno; then
   BUILDPDFDOC=yes
else
   BUILDPDFDOC=no
fi

AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])

AC_MSG_RESULT([$BUILDPDFDOC])

MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH GROFF_NO_SGR=y $LINUXDOC -B txt -f"
MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B latex --papersize=letter --output=ps"
MAKE_PDF="$PS2PDF"
MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC  -B html --split=0"

AC_SUBST(MAKE_TEXT)
AC_SUBST(MAKE_PS)
AC_SUBST(MAKE_PDF)
AC_SUBST(MAKE_HTML)
]) # XORG_CHECK_LINUXDOC

# XORG_CHECK_DOCBOOK
# -------------------
# Minimum version: 1.0.0
#
# Checks for the ability to build output formats from SGML DocBook source.
# For XXX in {TXT, PDF, PS, HTML}, the AM_CONDITIONAL "BUILD_XXXDOC"
# indicates whether the necessary tools and files are found and, if set,
# $(MAKE_XXX) blah.sgml will produce blah.xxx.
AC_DEFUN([XORG_CHECK_DOCBOOK],[
AC_REQUIRE([XORG_CHECK_SGML_DOCTOOLS])

BUILDTXTDOC=no
BUILDPDFDOC=no
BUILDPSDOC=no
BUILDHTMLDOC=no

AC_PATH_PROG(DOCBOOKPS, docbook2ps)
AC_PATH_PROG(DOCBOOKPDF, docbook2pdf)
AC_PATH_PROG(DOCBOOKHTML, docbook2html)
AC_PATH_PROG(DOCBOOKTXT, docbook2txt)

AC_MSG_CHECKING([whether to build text documentation])
if test x$XORG_SGML_PATH != x && test x$DOCBOOKTXT != x &&
   test x$BUILD_TXTDOC != xno; then
	BUILDTXTDOC=yes
fi
AM_CONDITIONAL(BUILD_TXTDOC, [test x$BUILDTXTDOC = xyes])
AC_MSG_RESULT([$BUILDTXTDOC])

AC_MSG_CHECKING([whether to build PDF documentation])
if test x$XORG_SGML_PATH != x && test x$DOCBOOKPDF != x &&
   test x$BUILD_PDFDOC != xno; then
	BUILDPDFDOC=yes
fi
AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
AC_MSG_RESULT([$BUILDPDFDOC])

AC_MSG_CHECKING([whether to build PostScript documentation])
if test x$XORG_SGML_PATH != x && test x$DOCBOOKPS != x &&
   test x$BUILD_PSDOC != xno; then
	BUILDPSDOC=yes
fi
AM_CONDITIONAL(BUILD_PSDOC, [test x$BUILDPSDOC = xyes])
AC_MSG_RESULT([$BUILDPSDOC])

AC_MSG_CHECKING([whether to build HTML documentation])
if test x$XORG_SGML_PATH != x && test x$DOCBOOKHTML != x &&
   test x$BUILD_HTMLDOC != xno; then
	BUILDHTMLDOC=yes
fi
AM_CONDITIONAL(BUILD_HTMLDOC, [test x$BUILDHTMLDOC = xyes])
AC_MSG_RESULT([$BUILDHTMLDOC])

MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKTXT"
MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPS"
MAKE_PDF="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPDF"
MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKHTML"

AC_SUBST(MAKE_TEXT)
AC_SUBST(MAKE_PS)
AC_SUBST(MAKE_PDF)
AC_SUBST(MAKE_HTML)
]) # XORG_CHECK_DOCBOOK

# XORG_WITH_XMLTO([MIN-VERSION], [DEFAULT])
# ----------------
# Minimum version: 1.5.0
# Minimum version for optional DEFAULT argument: 1.11.0
#
# Documentation tools are not always available on all platforms and sometimes
# not at the appropriate level. This macro enables a module to test for the
# presence of the tool and obtain it's path in separate variables. Coupled with
# the --with-xmlto option, it allows maximum flexibilty in making decisions
# as whether or not to use the xmlto package. When DEFAULT is not specified,
# --with-xmlto assumes 'auto'.
#
# Interface to module:
# HAVE_XMLTO: 	used in makefiles to conditionally generate documentation
# XMLTO:	returns the path of the xmlto program found
#		returns the path set by the user in the environment
# --with-xmlto:	'yes' user instructs the module to use xmlto
#		'no' user instructs the module not to use xmlto
#
# Added in version 1.10.0
# HAVE_XMLTO_TEXT: used in makefiles to conditionally generate text documentation
#                  xmlto for text output requires either lynx, links, or w3m browsers
#
# If the user sets the value of XMLTO, AC_PATH_PROG skips testing the path.
#
AC_DEFUN([XORG_WITH_XMLTO],[
AC_ARG_VAR([XMLTO], [Path to xmlto command])
m4_define([_defopt], m4_default([$2], [auto]))
AC_ARG_WITH(xmlto,
	AS_HELP_STRING([--with-xmlto],
	   [Use xmlto to regenerate documentation (default: ]_defopt[)]),
	   [use_xmlto=$withval], [use_xmlto=]_defopt)
m4_undefine([_defopt])

if test "x$use_xmlto" = x"auto"; then
   AC_PATH_PROG([XMLTO], [xmlto])
   if test "x$XMLTO" = "x"; then
        AC_MSG_WARN([xmlto not found - documentation targets will be skipped])
	have_xmlto=no
   else
        have_xmlto=yes
   fi
elif test "x$use_xmlto" = x"yes" ; then
   AC_PATH_PROG([XMLTO], [xmlto])
   if test "x$XMLTO" = "x"; then
        AC_MSG_ERROR([--with-xmlto=yes specified but xmlto not found in PATH])
   fi
   have_xmlto=yes
elif test "x$use_xmlto" = x"no" ; then
   if test "x$XMLTO" != "x"; then
      AC_MSG_WARN([ignoring XMLTO environment variable since --with-xmlto=no was specified])
   fi
   have_xmlto=no
else
   AC_MSG_ERROR([--with-xmlto expects 'yes' or 'no'])
fi

# Test for a minimum version of xmlto, if provided.
m4_ifval([$1],
[if test "$have_xmlto" = yes; then
    # scrape the xmlto version
    AC_MSG_CHECKING([the xmlto version])
    xmlto_version=`$XMLTO --version 2>/dev/null | cut -d' ' -f3`
    AC_MSG_RESULT([$xmlto_version])
    AS_VERSION_COMPARE([$xmlto_version], [$1],
        [if test "x$use_xmlto" = xauto; then
            AC_MSG_WARN([xmlto version $xmlto_version found, but $1 needed])
            have_xmlto=no
        else
            AC_MSG_ERROR([xmlto version $xmlto_version found, but $1 needed])
        fi])
fi])

# Test for the ability of xmlto to generate a text target
#
# NOTE: xmlto 0.0.27 or higher return a non-zero return code in the
# following test for empty XML docbook files.
# For compatibility reasons use the following empty XML docbook file and if
# it fails try it again with a non-empty XML file.
have_xmlto_text=no
cat > conftest.xml << "EOF"
EOF
AS_IF([test "$have_xmlto" = yes],
      [AS_IF([$XMLTO --skip-validation txt conftest.xml >/dev/null 2>&1],
             [have_xmlto_text=yes],
             [# Try it again with a non-empty XML file.
              cat > conftest.xml << "EOF"
<x></x>
EOF
              AS_IF([$XMLTO --skip-validation txt conftest.xml >/dev/null 2>&1],
                    [have_xmlto_text=yes],
                    [AC_MSG_WARN([xmlto cannot generate text format, this format skipped])])])])
rm -f conftest.xml
AM_CONDITIONAL([HAVE_XMLTO_TEXT], [test $have_xmlto_text = yes])
AM_CONDITIONAL([HAVE_XMLTO], [test "$have_xmlto" = yes])
]) # XORG_WITH_XMLTO

# XORG_WITH_XSLTPROC([MIN-VERSION], [DEFAULT])
# --------------------------------------------
# Minimum version: 1.12.0
# Minimum version for optional DEFAULT argument: 1.12.0
#
# XSLT (Extensible Stylesheet Language Transformations) is a declarative,
# XML-based language used for the transformation of XML documents.
# The xsltproc command line tool is for applying XSLT stylesheets to XML documents.
# It is used under the cover by xmlto to generate html files from DocBook/XML.
# The XSLT processor is often used as a standalone tool for transformations.
# It should not be assumed that this tool is used only to work with documnetation.
# When DEFAULT is not specified, --with-xsltproc assumes 'auto'.
#
# Interface to module:
# HAVE_XSLTPROC: used in makefiles to conditionally generate documentation
# XSLTPROC:	 returns the path of the xsltproc program found
#		 returns the path set by the user in the environment
# --with-xsltproc: 'yes' user instructs the module to use xsltproc
#		  'no' user instructs the module not to use xsltproc
# have_xsltproc: returns yes if xsltproc found in PATH or no
#
# If the user sets the value of XSLTPROC, AC_PATH_PROG skips testing the path.
#
AC_DEFUN([XORG_WITH_XSLTPROC],[
AC_ARG_VAR([XSLTPROC], [Path to xsltproc command])
# Preserves the interface, should it be implemented later
m4_ifval([$1], [m4_warn([syntax], [Checking for xsltproc MIN-VERSION is not implemented])])
m4_define([_defopt], m4_default([$2], [auto]))
AC_ARG_WITH(xsltproc,
	AS_HELP_STRING([--with-xsltproc],
	   [Use xsltproc for the transformation of XML documents (default: ]_defopt[)]),
	   [use_xsltproc=$withval], [use_xsltproc=]_defopt)
m4_undefine([_defopt])

if test "x$use_xsltproc" = x"auto"; then
   AC_PATH_PROG([XSLTPROC], [xsltproc])
   if test "x$XSLTPROC" = "x"; then
        AC_MSG_WARN([xsltproc not found - cannot transform XML documents])
	have_xsltproc=no
   else
        have_xsltproc=yes
   fi
elif test "x$use_xsltproc" = x"yes" ; then
   AC_PATH_PROG([XSLTPROC], [xsltproc])
   if test "x$XSLTPROC" = "x"; then
        AC_MSG_ERROR([--with-xsltproc=yes specified but xsltproc not found in PATH])
   fi
   have_xsltproc=yes
elif test "x$use_xsltproc" = x"no" ; then
   if test "x$XSLTPROC" != "x"; then
      AC_MSG_WARN([ignoring XSLTPROC environment variable since --with-xsltproc=no was specified])
   fi
   have_xsltproc=no
else
   AC_MSG_ERROR([--with-xsltproc expects 'yes' or 'no'])
fi

AM_CONDITIONAL([HAVE_XSLTPROC], [test "$have_xsltproc" = yes])
]) # XORG_WITH_XSLTPROC

# XORG_WITH_PERL([MIN-VERSION], [DEFAULT])
# ----------------------------------------
# Minimum version: 1.15.0
#
# PERL (Practical Extraction and Report Language) is a language optimized for
# scanning arbitrary text files, extracting information from those text files,
# and printing reports based on that information.
#
# When DEFAULT is not specified, --with-perl assumes 'auto'.
#
# Interface to module:
# HAVE_PERL: used in makefiles to conditionally scan text files
# PERL:	     returns the path of the perl program found
#	     returns the path set by the user in the environment
# --with-perl: 'yes' user instructs the module to use perl
#	       'no' user instructs the module not to use perl
# have_perl: returns yes if perl found in PATH or no
#
# If the user sets the value of PERL, AC_PATH_PROG skips testing the path.
#
AC_DEFUN([XORG_WITH_PERL],[
AC_ARG_VAR([PERL], [Path to perl command])
# Preserves the interface, should it be implemented later
m4_ifval([$1], [m4_warn([syntax], [Checking for perl MIN-VERSION is not implemented])])
m4_define([_defopt], m4_default([$2], [auto]))
AC_ARG_WITH(perl,
	AS_HELP_STRING([--with-perl],
	   [Use perl for extracting information from files (default: ]_defopt[)]),
	   [use_perl=$withval], [use_perl=]_defopt)
m4_undefine([_defopt])

if test "x$use_perl" = x"auto"; then
   AC_PATH_PROG([PERL], [perl])
   if test "x$PERL" = "x"; then
        AC_MSG_WARN([perl not found - cannot extract information and report])
	have_perl=no
   else
        have_perl=yes
   fi
elif test "x$use_perl" = x"yes" ; then
   AC_PATH_PROG([PERL], [perl])
   if test "x$PERL" = "x"; then
        AC_MSG_ERROR([--with-perl=yes specified but perl not found in PATH])
   fi
   have_perl=yes
elif test "x$use_perl" = x"no" ; then
   if test "x$PERL" != "x"; then
      AC_MSG_WARN([ignoring PERL environment variable since --with-perl=no was specified])
   fi
   have_perl=no
else
   AC_MSG_ERROR([--with-perl expects 'yes' or 'no'])
fi

AM_CONDITIONAL([HAVE_PERL], [test "$have_perl" = yes])
]) # XORG_WITH_PERL

# XORG_WITH_ASCIIDOC([MIN-VERSION], [DEFAULT])
# ----------------
# Minimum version: 1.5.0
# Minimum version for optional DEFAULT argument: 1.11.0
#
# Documentation tools are not always available on all platforms and sometimes
# not at the appropriate level. This macro enables a module to test for the
# presence of the tool and obtain it's path in separate variables. Coupled with
# the --with-asciidoc option, it allows maximum flexibilty in making decisions
# as whether or not to use the asciidoc package. When DEFAULT is not specified,
# --with-asciidoc assumes 'auto'.
#
# Interface to module:
# HAVE_ASCIIDOC: used in makefiles to conditionally generate documentation
# ASCIIDOC:	 returns the path of the asciidoc program found
#		 returns the path set by the user in the environment
# --with-asciidoc: 'yes' user instructs the module to use asciidoc
#		  'no' user instructs the module not to use asciidoc
#
# If the user sets the value of ASCIIDOC, AC_PATH_PROG skips testing the path.
#
AC_DEFUN([XORG_WITH_ASCIIDOC],[
AC_ARG_VAR([ASCIIDOC], [Path to asciidoc command])
m4_define([_defopt], m4_default([$2], [auto]))
AC_ARG_WITH(asciidoc,
	AS_HELP_STRING([--with-asciidoc],
	   [Use asciidoc to regenerate documentation (default: ]_defopt[)]),
	   [use_asciidoc=$withval], [use_asciidoc=]_defopt)
m4_undefine([_defopt])

if test "x$use_asciidoc" = x"auto"; then
   AC_PATH_PROG([ASCIIDOC], [asciidoc])
   if test "x$ASCIIDOC" = "x"; then
        AC_MSG_WARN([asciidoc not found - documentation targets will be skipped])
	have_asciidoc=no
   else
        have_asciidoc=yes
   fi
elif test "x$use_asciidoc" = x"yes" ; then
   AC_PATH_PROG([ASCIIDOC], [asciidoc])
   if test "x$ASCIIDOC" = "x"; then
        AC_MSG_ERROR([--with-asciidoc=yes specified but asciidoc not found in PATH])
   fi
   have_asciidoc=yes
elif test "x$use_asciidoc" = x"no" ; then
   if test "x$ASCIIDOC" != "x"; then
      AC_MSG_WARN([ignoring ASCIIDOC environment variable since --with-asciidoc=no was specified])
   fi
   have_asciidoc=no
else
   AC_MSG_ERROR([--with-asciidoc expects 'yes' or 'no'])
fi
m4_ifval([$1],
[if test "$have_asciidoc" = yes; then
    # scrape the asciidoc version
    AC_MSG_CHECKING([the asciidoc version])
    asciidoc_version=`$ASCIIDOC --version 2>/dev/null | cut -d' ' -f2`
    AC_MSG_RESULT([$asciidoc_version])
    AS_VERSION_COMPARE([$asciidoc_version], [$1],
        [if test "x$use_asciidoc" = xauto; then
            AC_MSG_WARN([asciidoc version $asciidoc_version found, but $1 needed])
            have_asciidoc=no
        else
            AC_MSG_ERROR([asciidoc version $asciidoc_version found, but $1 needed])
        fi])
fi])
AM_CONDITIONAL([HAVE_ASCIIDOC], [test "$have_asciidoc" = yes])
]) # XORG_WITH_ASCIIDOC

# XORG_WITH_DOXYGEN([MIN-VERSION], [DEFAULT])
# -------------------------------------------
# Minimum version: 1.5.0
# Minimum version for optional DEFAULT argument: 1.11.0
# Minimum version for optional DOT checking: 1.18.0
#
# Documentation tools are not always available on all platforms and sometimes
# not at the appropriate level. This macro enables a module to test for the
# presence of the tool and obtain it's path in separate variables. Coupled with
# the --with-doxygen option, it allows maximum flexibilty in making decisions
# as whether or not to use the doxygen package. When DEFAULT is not specified,
# --with-doxygen assumes 'auto'.
#
# Interface to module:
# HAVE_DOXYGEN: used in makefiles to conditionally generate documentation
# DOXYGEN:	 returns the path of the doxygen program found
#		 returns the path set by the user in the environment
# --with-doxygen: 'yes' user instructs the module to use doxygen
#		  'no' user instructs the module not to use doxygen
#
# If the user sets the value of DOXYGEN, AC_PATH_PROG skips testing the path.
#
AC_DEFUN([XORG_WITH_DOXYGEN],[
AC_ARG_VAR([DOXYGEN], [Path to doxygen command])
AC_ARG_VAR([DOT], [Path to the dot graphics utility])
m4_define([_defopt], m4_default([$2], [auto]))
AC_ARG_WITH(doxygen,
	AS_HELP_STRING([--with-doxygen],
	   [Use doxygen to regenerate documentation (default: ]_defopt[)]),
	   [use_doxygen=$withval], [use_doxygen=]_defopt)
m4_undefine([_defopt])

if test "x$use_doxygen" = x"auto"; then
   AC_PATH_PROG([DOXYGEN], [doxygen])
   if test "x$DOXYGEN" = "x"; then
        AC_MSG_WARN([doxygen not found - documentation targets will be skipped])
	have_doxygen=no
   else
        have_doxygen=yes
   fi
elif test "x$use_doxygen" = x"yes" ; then
   AC_PATH_PROG([DOXYGEN], [doxygen])
   if test "x$DOXYGEN" = "x"; then
        AC_MSG_ERROR([--with-doxygen=yes specified but doxygen not found in PATH])
   fi
   have_doxygen=yes
elif test "x$use_doxygen" = x"no" ; then
   if test "x$DOXYGEN" != "x"; then
      AC_MSG_WARN([ignoring DOXYGEN environment variable since --with-doxygen=no was specified])
   fi
   have_doxygen=no
else
   AC_MSG_ERROR([--with-doxygen expects 'yes' or 'no'])
fi
m4_ifval([$1],
[if test "$have_doxygen" = yes; then
    # scrape the doxygen version
    AC_MSG_CHECKING([the doxygen version])
    doxygen_version=`$DOXYGEN --version 2>/dev/null`
    AC_MSG_RESULT([$doxygen_version])
    AS_VERSION_COMPARE([$doxygen_version], [$1],
        [if test "x$use_doxygen" = xauto; then
            AC_MSG_WARN([doxygen version $doxygen_version found, but $1 needed])
            have_doxygen=no
        else
            AC_MSG_ERROR([doxygen version $doxygen_version found, but $1 needed])
        fi])
fi])

dnl Check for DOT if we have doxygen. The caller decides if it is mandatory
dnl HAVE_DOT is a variable that can be used in your doxygen.in config file:
dnl 	HAVE_DOT = @HAVE_DOT@
HAVE_DOT=no
if test "x$have_doxygen" = "xyes"; then
  AC_PATH_PROG([DOT], [dot])
    if test "x$DOT" != "x"; then
      HAVE_DOT=yes
    fi
fi

AC_SUBST([HAVE_DOT])
AM_CONDITIONAL([HAVE_DOT], [test "$HAVE_DOT" = "yes"])
AM_CONDITIONAL([HAVE_DOXYGEN], [test "$have_doxygen" = yes])
]) # XORG_WITH_DOXYGEN

# XORG_WITH_GROFF([DEFAULT])
# ----------------
# Minimum version: 1.6.0
# Minimum version for optional DEFAULT argument: 1.11.0
#
# Documentation tools are not always available on all platforms and sometimes
# not at the appropriate level. This macro enables a module to test for the
# presence of the tool and obtain it's path in separate variables. Coupled with
# the --with-groff option, it allows maximum flexibilty in making decisions
# as whether or not to use the groff package. When DEFAULT is not specified,
# --with-groff assumes 'auto'.
#
# Interface to module:
# HAVE_GROFF:	 used in makefiles to conditionally generate documentation
# HAVE_GROFF_MM: the memorandum macros (-mm) package
# HAVE_GROFF_MS: the -ms macros package
# GROFF:	 returns the path of the groff program found
#		 returns the path set by the user in the environment
# --with-groff:	 'yes' user instructs the module to use groff
#		 'no' user instructs the module not to use groff
#
# Added in version 1.9.0:
# HAVE_GROFF_HTML: groff has dependencies to output HTML format:
#		   pnmcut pnmcrop pnmtopng pnmtops from the netpbm package.
#		   psselect from the psutils package.
#		   the ghostcript package. Refer to the grohtml man pages
#
# If the user sets the value of GROFF, AC_PATH_PROG skips testing the path.
#
# OS and distros often splits groff in a basic and full package, the former
# having the groff program and the later having devices, fonts and macros
# Checking for the groff executable is not enough.
#
# If macros are missing, we cannot assume that groff is useless, so we don't
# unset HAVE_GROFF or GROFF env variables.
# HAVE_GROFF_?? can never be true while HAVE_GROFF is false.
#
AC_DEFUN([XORG_WITH_GROFF],[
AC_ARG_VAR([GROFF], [Path to groff command])
m4_define([_defopt], m4_default([$1], [auto]))
AC_ARG_WITH(groff,
	AS_HELP_STRING([--with-groff],
	   [Use groff to regenerate documentation (default: ]_defopt[)]),
	   [use_groff=$withval], [use_groff=]_defopt)
m4_undefine([_defopt])

if test "x$use_groff" = x"auto"; then
   AC_PATH_PROG([GROFF], [groff])
   if test "x$GROFF" = "x"; then
        AC_MSG_WARN([groff not found - documentation targets will be skipped])
	have_groff=no
   else
        have_groff=yes
   fi
elif test "x$use_groff" = x"yes" ; then
   AC_PATH_PROG([GROFF], [groff])
   if test "x$GROFF" = "x"; then
        AC_MSG_ERROR([--with-groff=yes specified but groff not found in PATH])
   fi
   have_groff=yes
elif test "x$use_groff" = x"no" ; then
   if test "x$GROFF" != "x"; then
      AC_MSG_WARN([ignoring GROFF environment variable since --with-groff=no was specified])
   fi
   have_groff=no
else
   AC_MSG_ERROR([--with-groff expects 'yes' or 'no'])
fi

# We have groff, test for the presence of the macro packages
if test "x$have_groff" = x"yes"; then
    AC_MSG_CHECKING([for ${GROFF} -ms macros])
    if ${GROFF} -ms -I. /dev/null >/dev/null 2>&1 ; then
        groff_ms_works=yes
    else
        groff_ms_works=no
    fi
    AC_MSG_RESULT([$groff_ms_works])
    AC_MSG_CHECKING([for ${GROFF} -mm macros])
    if ${GROFF} -mm -I. /dev/null >/dev/null 2>&1 ; then
        groff_mm_works=yes
    else
        groff_mm_works=no
    fi
    AC_MSG_RESULT([$groff_mm_works])
fi

# We have groff, test for HTML dependencies, one command per package
if test "x$have_groff" = x"yes"; then
   AC_PATH_PROGS(GS_PATH, [gs gswin32c])
   AC_PATH_PROG(PNMTOPNG_PATH, [pnmtopng])
   AC_PATH_PROG(PSSELECT_PATH, [psselect])
   if test "x$GS_PATH" != "x" -a "x$PNMTOPNG_PATH" != "x" -a "x$PSSELECT_PATH" != "x"; then
      have_groff_html=yes
   else
      have_groff_html=no
      AC_MSG_WARN([grohtml dependencies not found - HTML Documentation skipped. Refer to grohtml man pages])
   fi
fi

# Set Automake conditionals for Makefiles
AM_CONDITIONAL([HAVE_GROFF], [test "$have_groff" = yes])
AM_CONDITIONAL([HAVE_GROFF_MS], [test "$groff_ms_works" = yes])
AM_CONDITIONAL([HAVE_GROFF_MM], [test "$groff_mm_works" = yes])
AM_CONDITIONAL([HAVE_GROFF_HTML], [test "$have_groff_html" = yes])
]) # XORG_WITH_GROFF

# XORG_WITH_FOP([MIN-VERSION], [DEFAULT])
# ---------------------------------------
# Minimum version: 1.6.0
# Minimum version for optional DEFAULT argument: 1.11.0
# Minimum version for optional MIN-VERSION argument: 1.15.0
#
# Documentation tools are not always available on all platforms and sometimes
# not at the appropriate level. This macro enables a module to test for the
# presence of the tool and obtain it's path in separate variables. Coupled with
# the --with-fop option, it allows maximum flexibilty in making decisions
# as whether or not to use the fop package. When DEFAULT is not specified,
# --with-fop assumes 'auto'.
#
# Interface to module:
# HAVE_FOP: 	used in makefiles to conditionally generate documentation
# FOP:	 	returns the path of the fop program found
#		returns the path set by the user in the environment
# --with-fop: 	'yes' user instructs the module to use fop
#		'no' user instructs the module not to use fop
#
# If the user sets the value of FOP, AC_PATH_PROG skips testing the path.
#
AC_DEFUN([XORG_WITH_FOP],[
AC_ARG_VAR([FOP], [Path to fop command])
m4_define([_defopt], m4_default([$2], [auto]))
AC_ARG_WITH(fop,
	AS_HELP_STRING([--with-fop],
	   [Use fop to regenerate documentation (default: ]_defopt[)]),
	   [use_fop=$withval], [use_fop=]_defopt)
m4_undefine([_defopt])

if test "x$use_fop" = x"auto"; then
   AC_PATH_PROG([FOP], [fop])
   if test "x$FOP" = "x"; then
        AC_MSG_WARN([fop not found - documentation targets will be skipped])
	have_fop=no
   else
        have_fop=yes
   fi
elif test "x$use_fop" = x"yes" ; then
   AC_PATH_PROG([FOP], [fop])
   if test "x$FOP" = "x"; then
        AC_MSG_ERROR([--with-fop=yes specified but fop not found in PATH])
   fi
   have_fop=yes
elif test "x$use_fop" = x"no" ; then
   if test "x$FOP" != "x"; then
      AC_MSG_WARN([ignoring FOP environment variable since --with-fop=no was specified])
   fi
   have_fop=no
else
   AC_MSG_ERROR([--with-fop expects 'yes' or 'no'])
fi

# Test for a minimum version of fop, if provided.
m4_ifval([$1],
[if test "$have_fop" = yes; then
    # scrape the fop version
    AC_MSG_CHECKING([for fop minimum version])
    fop_version=`$FOP -version 2>/dev/null | cut -d' ' -f3`
    AC_MSG_RESULT([$fop_version])
    AS_VERSION_COMPARE([$fop_version], [$1],
        [if test "x$use_fop" = xauto; then
            AC_MSG_WARN([fop version $fop_version found, but $1 needed])
            have_fop=no
        else
            AC_MSG_ERROR([fop version $fop_version found, but $1 needed])
        fi])
fi])
AM_CONDITIONAL([HAVE_FOP], [test "$have_fop" = yes])
]) # XORG_WITH_FOP

# XORG_WITH_M4([MIN-VERSION])
# ---------------------------
# Minimum version: 1.19.0
#
# This macro attempts to locate an m4 macro processor which supports
# -I option and is only useful for modules relying on M4 in order to
# expand macros in source code files.
#
# Interface to module:
# M4:	 	returns the path of the m4 program found
#		returns the path set by the user in the environment
#
AC_DEFUN([XORG_WITH_M4], [
AC_CACHE_CHECK([for m4 that supports -I option], [ac_cv_path_M4],
   [AC_PATH_PROGS_FEATURE_CHECK([M4], [m4 gm4],
       [[$ac_path_M4 -I. /dev/null > /dev/null 2>&1 && \
         ac_cv_path_M4=$ac_path_M4 ac_path_M4_found=:]],
   [AC_MSG_ERROR([could not find m4 that supports -I option])],
   [$PATH:/usr/gnu/bin])])

AC_SUBST([M4], [$ac_cv_path_M4])
]) # XORG_WITH_M4

# XORG_WITH_PS2PDF([DEFAULT])
# ----------------
# Minimum version: 1.6.0
# Minimum version for optional DEFAULT argument: 1.11.0
#
# Documentation tools are not always available on all platforms and sometimes
# not at the appropriate level. This macro enables a module to test for the
# presence of the tool and obtain it's path in separate variables. Coupled with
# the --with-ps2pdf option, it allows maximum flexibilty in making decisions
# as whether or not to use the ps2pdf package. When DEFAULT is not specified,
# --with-ps2pdf assumes 'auto'.
#
# Interface to module:
# HAVE_PS2PDF: 	used in makefiles to conditionally generate documentation
# PS2PDF:	returns the path of the ps2pdf program found
#		returns the path set by the user in the environment
# --with-ps2pdf: 'yes' user instructs the module to use ps2pdf
#		 'no' user instructs the module not to use ps2pdf
#
# If the user sets the value of PS2PDF, AC_PATH_PROG skips testing the path.
#
AC_DEFUN([XORG_WITH_PS2PDF],[
AC_ARG_VAR([PS2PDF], [Path to ps2pdf command])
m4_define([_defopt], m4_default([$1], [auto]))
AC_ARG_WITH(ps2pdf,
	AS_HELP_STRING([--with-ps2pdf],
	   [Use ps2pdf to regenerate documentation (default: ]_defopt[)]),
	   [use_ps2pdf=$withval], [use_ps2pdf=]_defopt)
m4_undefine([_defopt])

if test "x$use_ps2pdf" = x"auto"; then
   AC_PATH_PROG([PS2PDF], [ps2pdf])
   if test "x$PS2PDF" = "x"; then
        AC_MSG_WARN([ps2pdf not found - documentation targets will be skipped])
	have_ps2pdf=no
   else
        have_ps2pdf=yes
   fi
elif test "x$use_ps2pdf" = x"yes" ; then
   AC_PATH_PROG([PS2PDF], [ps2pdf])
   if test "x$PS2PDF" = "x"; then
        AC_MSG_ERROR([--with-ps2pdf=yes specified but ps2pdf not found in PATH])
   fi
   have_ps2pdf=yes
elif test "x$use_ps2pdf" = x"no" ; then
   if test "x$PS2PDF" != "x"; then
      AC_MSG_WARN([ignoring PS2PDF environment variable since --with-ps2pdf=no was specified])
   fi
   have_ps2pdf=no
else
   AC_MSG_ERROR([--with-ps2pdf expects 'yes' or 'no'])
fi
AM_CONDITIONAL([HAVE_PS2PDF], [test "$have_ps2pdf" = yes])
]) # XORG_WITH_PS2PDF

# XORG_ENABLE_DOCS (enable_docs=yes)
# ----------------
# Minimum version: 1.6.0
#
# Documentation tools are not always available on all platforms and sometimes
# not at the appropriate level. This macro enables a builder to skip all
# documentation targets except traditional man pages.
# Combined with the specific tool checking macros XORG_WITH_*, it provides
# maximum flexibilty in controlling documentation building.
# Refer to:
# XORG_WITH_XMLTO         --with-xmlto
# XORG_WITH_ASCIIDOC      --with-asciidoc
# XORG_WITH_DOXYGEN       --with-doxygen
# XORG_WITH_FOP           --with-fop
# XORG_WITH_GROFF         --with-groff
# XORG_WITH_PS2PDF        --with-ps2pdf
#
# Interface to module:
# ENABLE_DOCS: 	  used in makefiles to conditionally generate documentation
# --enable-docs: 'yes' user instructs the module to generate docs
#		 'no' user instructs the module not to generate docs
# parm1:	specify the default value, yes or no.
#
AC_DEFUN([XORG_ENABLE_DOCS],[
m4_define([docs_default], m4_default([$1], [yes]))
AC_ARG_ENABLE(docs,
	AS_HELP_STRING([--enable-docs],
	   [Enable building the documentation (default: ]docs_default[)]),
	   [build_docs=$enableval], [build_docs=]docs_default)
m4_undefine([docs_default])
AM_CONDITIONAL(ENABLE_DOCS, [test x$build_docs = xyes])
AC_MSG_CHECKING([whether to build documentation])
AC_MSG_RESULT([$build_docs])
]) # XORG_ENABLE_DOCS

# XORG_ENABLE_DEVEL_DOCS (enable_devel_docs=yes)
# ----------------
# Minimum version: 1.6.0
#
# This macro enables a builder to skip all developer documentation.
# Combined with the specific tool checking macros XORG_WITH_*, it provides
# maximum flexibilty in controlling documentation building.
# Refer to:
# XORG_WITH_XMLTO         --with-xmlto
# XORG_WITH_ASCIIDOC      --with-asciidoc
# XORG_WITH_DOXYGEN       --with-doxygen
# XORG_WITH_FOP           --with-fop
# XORG_WITH_GROFF         --with-groff
# XORG_WITH_PS2PDF        --with-ps2pdf
#
# Interface to module:
# ENABLE_DEVEL_DOCS:	used in makefiles to conditionally generate developer docs
# --enable-devel-docs:	'yes' user instructs the module to generate developer docs
#			'no' user instructs the module not to generate developer docs
# parm1:		specify the default value, yes or no.
#
AC_DEFUN([XORG_ENABLE_DEVEL_DOCS],[
m4_define([devel_default], m4_default([$1], [yes]))
AC_ARG_ENABLE(devel-docs,
	AS_HELP_STRING([--enable-devel-docs],
	   [Enable building the developer documentation (default: ]devel_default[)]),
	   [build_devel_docs=$enableval], [build_devel_docs=]devel_default)
m4_undefine([devel_default])
AM_CONDITIONAL(ENABLE_DEVEL_DOCS, [test x$build_devel_docs = xyes])
AC_MSG_CHECKING([whether to build developer documentation])
AC_MSG_RESULT([$build_devel_docs])
]) # XORG_ENABLE_DEVEL_DOCS

# XORG_ENABLE_SPECS (enable_specs=yes)
# ----------------
# Minimum version: 1.6.0
#
# This macro enables a builder to skip all functional specification targets.
# Combined with the specific tool checking macros XORG_WITH_*, it provides
# maximum flexibilty in controlling documentation building.
# Refer to:
# XORG_WITH_XMLTO         --with-xmlto
# XORG_WITH_ASCIIDOC      --with-asciidoc
# XORG_WITH_DOXYGEN       --with-doxygen
# XORG_WITH_FOP           --with-fop
# XORG_WITH_GROFF         --with-groff
# XORG_WITH_PS2PDF        --with-ps2pdf
#
# Interface to module:
# ENABLE_SPECS:		used in makefiles to conditionally generate specs
# --enable-specs:	'yes' user instructs the module to generate specs
#			'no' user instructs the module not to generate specs
# parm1:		specify the default value, yes or no.
#
AC_DEFUN([XORG_ENABLE_SPECS],[
m4_define([spec_default], m4_default([$1], [yes]))
AC_ARG_ENABLE(specs,
	AS_HELP_STRING([--enable-specs],
	   [Enable building the specs (default: ]spec_default[)]),
	   [build_specs=$enableval], [build_specs=]spec_default)
m4_undefine([spec_default])
AM_CONDITIONAL(ENABLE_SPECS, [test x$build_specs = xyes])
AC_MSG_CHECKING([whether to build functional specifications])
AC_MSG_RESULT([$build_specs])
]) # XORG_ENABLE_SPECS

# XORG_ENABLE_UNIT_TESTS (enable_unit_tests=auto)
# ----------------------------------------------
# Minimum version: 1.13.0
#
# This macro enables a builder to enable/disable unit testing
# It makes no assumption about the test cases implementation
# Test cases may or may not use Automake "Support for test suites"
# They may or may not use the software utility library GLib
#
# When used in conjunction with XORG_WITH_GLIB, use both AM_CONDITIONAL
# ENABLE_UNIT_TESTS and HAVE_GLIB. Not all unit tests may use glib.
# The variable enable_unit_tests is used by other macros in this file.
#
# Interface to module:
# ENABLE_UNIT_TESTS:	used in makefiles to conditionally build tests
# enable_unit_tests:    used in configure.ac for additional configuration
# --enable-unit-tests:	'yes' user instructs the module to build tests
#			'no' user instructs the module not to build tests
# parm1:		specify the default value, yes or no.
#
AC_DEFUN([XORG_ENABLE_UNIT_TESTS],[
AC_BEFORE([$0], [XORG_WITH_GLIB])
AC_BEFORE([$0], [XORG_LD_WRAP])
AC_REQUIRE([XORG_MEMORY_CHECK_FLAGS])
m4_define([_defopt], m4_default([$1], [auto]))
AC_ARG_ENABLE(unit-tests, AS_HELP_STRING([--enable-unit-tests],
	[Enable building unit test cases (default: ]_defopt[)]),
	[enable_unit_tests=$enableval], [enable_unit_tests=]_defopt)
m4_undefine([_defopt])
AM_CONDITIONAL(ENABLE_UNIT_TESTS, [test "x$enable_unit_tests" != xno])
AC_MSG_CHECKING([whether to build unit test cases])
AC_MSG_RESULT([$enable_unit_tests])
]) # XORG_ENABLE_UNIT_TESTS

# XORG_ENABLE_INTEGRATION_TESTS (enable_unit_tests=auto)
# ------------------------------------------------------
# Minimum version: 1.17.0
#
# This macro enables a builder to enable/disable integration testing
# It makes no assumption about the test cases' implementation
# Test cases may or may not use Automake "Support for test suites"
#
# Please see XORG_ENABLE_UNIT_TESTS for unit test support. Unit test support
# usually requires less dependencies and may be built and run under less
# stringent environments than integration tests.
#
# Interface to module:
# ENABLE_INTEGRATION_TESTS:   used in makefiles to conditionally build tests
# enable_integration_tests:   used in configure.ac for additional configuration
# --enable-integration-tests: 'yes' user instructs the module to build tests
#                             'no' user instructs the module not to build tests
# parm1:                      specify the default value, yes or no.
#
AC_DEFUN([XORG_ENABLE_INTEGRATION_TESTS],[
AC_REQUIRE([XORG_MEMORY_CHECK_FLAGS])
m4_define([_defopt], m4_default([$1], [auto]))
AC_ARG_ENABLE(integration-tests, AS_HELP_STRING([--enable-integration-tests],
	[Enable building integration test cases (default: ]_defopt[)]),
	[enable_integration_tests=$enableval],
	[enable_integration_tests=]_defopt)
m4_undefine([_defopt])
AM_CONDITIONAL([ENABLE_INTEGRATION_TESTS],
	[test "x$enable_integration_tests" != xno])
AC_MSG_CHECKING([whether to build unit test cases])
AC_MSG_RESULT([$enable_integration_tests])
]) # XORG_ENABLE_INTEGRATION_TESTS

# XORG_WITH_GLIB([MIN-VERSION], [DEFAULT])
# ----------------------------------------
# Minimum version: 1.13.0
#
# GLib is a library which provides advanced data structures and functions.
# This macro enables a module to test for the presence of Glib.
#
# When used with ENABLE_UNIT_TESTS, it is assumed GLib is used for unit testing.
# Otherwise the value of $enable_unit_tests is blank.
#
# Please see XORG_ENABLE_INTEGRATION_TESTS for integration test support. Unit
# test support usually requires less dependencies and may be built and run under
# less stringent environments than integration tests.
#
# Interface to module:
# HAVE_GLIB: used in makefiles to conditionally build targets
# with_glib: used in configure.ac to know if GLib has been found
# --with-glib:	'yes' user instructs the module to use glib
#		'no' user instructs the module not to use glib
#
AC_DEFUN([XORG_WITH_GLIB],[
AC_REQUIRE([PKG_PROG_PKG_CONFIG])
m4_define([_defopt], m4_default([$2], [auto]))
AC_ARG_WITH(glib, AS_HELP_STRING([--with-glib],
	[Use GLib library for unit testing (default: ]_defopt[)]),
	[with_glib=$withval], [with_glib=]_defopt)
m4_undefine([_defopt])

have_glib=no
# Do not probe GLib if user explicitly disabled unit testing
if test "x$enable_unit_tests" != x"no"; then
  # Do not probe GLib if user explicitly disabled it
  if test "x$with_glib" != x"no"; then
    m4_ifval(
      [$1],
      [PKG_CHECK_MODULES([GLIB], [glib-2.0 >= $1], [have_glib=yes], [have_glib=no])],
      [PKG_CHECK_MODULES([GLIB], [glib-2.0], [have_glib=yes], [have_glib=no])]
    )
  fi
fi

# Not having GLib when unit testing has been explicitly requested is an error
if test "x$enable_unit_tests" = x"yes"; then
  if test "x$have_glib" = x"no"; then
    AC_MSG_ERROR([--enable-unit-tests=yes specified but glib-2.0 not found])
  fi
fi

# Having unit testing disabled when GLib has been explicitly requested is an error
if test "x$enable_unit_tests" = x"no"; then
  if test "x$with_glib" = x"yes"; then
    AC_MSG_ERROR([--enable-unit-tests=yes specified but glib-2.0 not found])
  fi
fi

# Not having GLib when it has been explicitly requested is an error
if test "x$with_glib" = x"yes"; then
  if test "x$have_glib" = x"no"; then
    AC_MSG_ERROR([--with-glib=yes specified but glib-2.0 not found])
  fi
fi

AM_CONDITIONAL([HAVE_GLIB], [test "$have_glib" = yes])
]) # XORG_WITH_GLIB

# XORG_LD_WRAP([required|optional])
# ---------------------------------
# Minimum version: 1.13.0
#
# Check if linker supports -wrap, passed via compiler flags
#
# When used with ENABLE_UNIT_TESTS, it is assumed -wrap is used for unit testing.
# Otherwise the value of $enable_unit_tests is blank.
#
# Argument added in 1.16.0 - default is "required", to match existing behavior
# of returning an error if enable_unit_tests is yes, and ld -wrap is not
# available, an argument of "optional" allows use when some unit tests require
# ld -wrap and others do not.
#
AC_DEFUN([XORG_LD_WRAP],[
XORG_CHECK_LINKER_FLAGS([-Wl,-wrap,exit],[have_ld_wrap=yes],[have_ld_wrap=no],
    [AC_LANG_PROGRAM([#include <stdlib.h>
                      void __wrap_exit(int status) { return; }],
                     [exit(0);])])
# Not having ld wrap when unit testing has been explicitly requested is an error
if test "x$enable_unit_tests" = x"yes" -a "x$1" != "xoptional"; then
  if test "x$have_ld_wrap" = x"no"; then
    AC_MSG_ERROR([--enable-unit-tests=yes specified but ld -wrap support is not available])
  fi
fi
AM_CONDITIONAL([HAVE_LD_WRAP], [test "$have_ld_wrap" = yes])
#
]) # XORG_LD_WRAP

# XORG_CHECK_LINKER_FLAGS
# -----------------------
# SYNOPSIS
#
#   XORG_CHECK_LINKER_FLAGS(FLAGS, [ACTION-SUCCESS], [ACTION-FAILURE], [PROGRAM-SOURCE])
#
# DESCRIPTION
#
#   Check whether the given linker FLAGS work with the current language's
#   linker, or whether they give an error.
#
#   ACTION-SUCCESS/ACTION-FAILURE are shell commands to execute on
#   success/failure.
#
#   PROGRAM-SOURCE is the program source to link with, if needed
#
#   NOTE: Based on AX_CHECK_COMPILER_FLAGS.
#
# LICENSE
#
#   Copyright (c) 2009 Mike Frysinger <vapier@gentoo.org>
#   Copyright (c) 2009 Steven G. Johnson <stevenj@alum.mit.edu>
#   Copyright (c) 2009 Matteo Frigo
#
#   This program is free software: you can redistribute it and/or modify it
#   under the terms of the GNU General Public License as published by the
#   Free Software Foundation, either version 3 of the License, or (at your
#   option) any later version.
#
#   This program is distributed in the hope that it will be useful, but
#   WITHOUT ANY WARRANTY; without even the implied warranty of
#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
#   Public License for more details.
#
#   You should have received a copy of the GNU General Public License along
#   with this program. If not, see <http://www.gnu.org/licenses/>.
#
#   As a special exception, the respective Autoconf Macro's copyright owner
#   gives unlimited permission to copy, distribute and modify the configure
#   scripts that are the output of Autoconf when processing the Macro. You
#   need not follow the terms of the GNU General Public License when using
#   or distributing such scripts, even though portions of the text of the
#   Macro appear in them. The GNU General Public License (GPL) does govern
#   all other use of the material that constitutes the Autoconf Macro.
#
#   This special exception to the GPL applies to versions of the Autoconf
#   Macro released by the Autoconf Archive. When you make and distribute a
#   modified version of the Autoconf Macro, you may extend this special
#   exception to the GPL to apply to your modified version as well.#
AC_DEFUN([XORG_CHECK_LINKER_FLAGS],
[AC_MSG_CHECKING([whether the linker accepts $1])
dnl Some hackery here since AC_CACHE_VAL can't handle a non-literal varname:
AS_LITERAL_IF([$1],
  [AC_CACHE_VAL(AS_TR_SH(xorg_cv_linker_flags_[$1]), [
      ax_save_FLAGS=$LDFLAGS
      LDFLAGS="$1"
      AC_LINK_IFELSE([m4_default([$4],[AC_LANG_PROGRAM()])],
        AS_TR_SH(xorg_cv_linker_flags_[$1])=yes,
        AS_TR_SH(xorg_cv_linker_flags_[$1])=no)
      LDFLAGS=$ax_save_FLAGS])],
  [ax_save_FLAGS=$LDFLAGS
   LDFLAGS="$1"
   AC_LINK_IFELSE([AC_LANG_PROGRAM()],
     eval AS_TR_SH(xorg_cv_linker_flags_[$1])=yes,
     eval AS_TR_SH(xorg_cv_linker_flags_[$1])=no)
   LDFLAGS=$ax_save_FLAGS])
eval xorg_check_linker_flags=$AS_TR_SH(xorg_cv_linker_flags_[$1])
AC_MSG_RESULT($xorg_check_linker_flags)
if test "x$xorg_check_linker_flags" = xyes; then
	m4_default([$2], :)
else
	m4_default([$3], :)
fi
]) # XORG_CHECK_LINKER_FLAGS

# XORG_MEMORY_CHECK_FLAGS
# -----------------------
# Minimum version: 1.16.0
#
# This macro attempts to find appropriate memory checking functionality
# for various platforms which unit testing code may use to catch various
# forms of memory allocation and access errors in testing.
#
# Interface to module:
# XORG_MALLOC_DEBUG_ENV - environment variables to set to enable debugging
#                         Usually added to TESTS_ENVIRONMENT in Makefile.am
#
# If the user sets the value of XORG_MALLOC_DEBUG_ENV, it is used verbatim.
#
AC_DEFUN([XORG_MEMORY_CHECK_FLAGS],[

AC_REQUIRE([AC_CANONICAL_HOST])
AC_ARG_VAR([XORG_MALLOC_DEBUG_ENV],
           [Environment variables to enable memory checking in tests])

# Check for different types of support on different platforms
case $host_os in
    solaris*)
        AC_CHECK_LIB([umem], [umem_alloc],
            [malloc_debug_env='LD_PRELOAD=libumem.so UMEM_DEBUG=default'])
        ;;
    *-gnu*) # GNU libc - Value is used as a single byte bit pattern,
        # both directly and inverted, so should not be 0 or 255.
        malloc_debug_env='MALLOC_PERTURB_=15'
        ;;
    darwin*)
        malloc_debug_env='MallocPreScribble=1 MallocScribble=1 DYLD_INSERT_LIBRARIES=/usr/lib/libgmalloc.dylib'
        ;;
    *bsd*)
        malloc_debug_env='MallocPreScribble=1 MallocScribble=1'
        ;;
esac

# User supplied flags override default flags
if test "x$XORG_MALLOC_DEBUG_ENV" != "x"; then
    malloc_debug_env="$XORG_MALLOC_DEBUG_ENV"
fi

AC_SUBST([XORG_MALLOC_DEBUG_ENV],[$malloc_debug_env])
]) # XORG_WITH_LINT

# XORG_CHECK_MALLOC_ZERO
# ----------------------
# Minimum version: 1.0.0
#
# Defines {MALLOC,XMALLOC,XTMALLOC}_ZERO_CFLAGS appropriately if
# malloc(0) returns NULL.  Packages should add one of these cflags to
# their AM_CFLAGS (or other appropriate *_CFLAGS) to use them.
AC_DEFUN([XORG_CHECK_MALLOC_ZERO],[
AC_ARG_ENABLE(malloc0returnsnull,
	AS_HELP_STRING([--enable-malloc0returnsnull],
		       [malloc(0) returns NULL (default: auto)]),
	[MALLOC_ZERO_RETURNS_NULL=$enableval],
	[MALLOC_ZERO_RETURNS_NULL=auto])

AC_MSG_CHECKING([whether malloc(0) returns NULL])
if test "x$MALLOC_ZERO_RETURNS_NULL" = xauto; then
AC_CACHE_VAL([xorg_cv_malloc0_returns_null],
	[AC_RUN_IFELSE([AC_LANG_PROGRAM([
#include <stdlib.h>
],[
    char *m0, *r0, *c0, *p;
    m0 = malloc(0);
    p = malloc(10);
    r0 = realloc(p,0);
    c0 = calloc(0,10);
    exit((m0 == 0 || r0 == 0 || c0 == 0) ? 0 : 1);
])],
		[xorg_cv_malloc0_returns_null=yes],
		[xorg_cv_malloc0_returns_null=no])])
MALLOC_ZERO_RETURNS_NULL=$xorg_cv_malloc0_returns_null
fi
AC_MSG_RESULT([$MALLOC_ZERO_RETURNS_NULL])

if test "x$MALLOC_ZERO_RETURNS_NULL" = xyes; then
	MALLOC_ZERO_CFLAGS="-DMALLOC_0_RETURNS_NULL"
	XMALLOC_ZERO_CFLAGS=$MALLOC_ZERO_CFLAGS
	XTMALLOC_ZERO_CFLAGS="$MALLOC_ZERO_CFLAGS -DXTMALLOC_BC"
else
	MALLOC_ZERO_CFLAGS=""
	XMALLOC_ZERO_CFLAGS=""
	XTMALLOC_ZERO_CFLAGS=""
fi

AC_SUBST([MALLOC_ZERO_CFLAGS])
AC_SUBST([XMALLOC_ZERO_CFLAGS])
AC_SUBST([XTMALLOC_ZERO_CFLAGS])
]) # XORG_CHECK_MALLOC_ZERO

# XORG_WITH_LINT()
# ----------------
# Minimum version: 1.1.0
#
# This macro enables the use of a tool that flags some suspicious and
# non-portable constructs (likely to be bugs) in C language source code.
# It will attempt to locate the tool and use appropriate options.
# There are various lint type tools on different platforms.
#
# Interface to module:
# LINT:		returns the path to the tool found on the platform
#		or the value set to LINT on the configure cmd line
#		also an Automake conditional
# LINT_FLAGS:	an Automake variable with appropriate flags
#
# --with-lint:	'yes' user instructs the module to use lint
#		'no' user instructs the module not to use lint (default)
#
# If the user sets the value of LINT, AC_PATH_PROG skips testing the path.
# If the user sets the value of LINT_FLAGS, they are used verbatim.
#
AC_DEFUN([XORG_WITH_LINT],[

AC_ARG_VAR([LINT], [Path to a lint-style command])
AC_ARG_VAR([LINT_FLAGS], [Flags for the lint-style command])
AC_ARG_WITH(lint, [AS_HELP_STRING([--with-lint],
		[Use a lint-style source code checker (default: disabled)])],
		[use_lint=$withval], [use_lint=no])

# Obtain platform specific info like program name and options
# The lint program on FreeBSD and NetBSD is different from the one on Solaris
case $host_os in
  *linux* | *openbsd* | kfreebsd*-gnu | darwin* | cygwin*)
	lint_name=splint
	lint_options="-badflag"
	;;
  *freebsd* | *netbsd*)
	lint_name=lint
	lint_options="-u -b"
	;;
  *solaris*)
	lint_name=lint
	lint_options="-u -b -h -erroff=E_INDISTING_FROM_TRUNC2"
	;;
esac

# Test for the presence of the program (either guessed by the code or spelled out by the user)
if test "x$use_lint" = x"yes" ; then
   AC_PATH_PROG([LINT], [$lint_name])
   if test "x$LINT" = "x"; then
        AC_MSG_ERROR([--with-lint=yes specified but lint-style tool not found in PATH])
   fi
elif test "x$use_lint" = x"no" ; then
   if test "x$LINT" != "x"; then
      AC_MSG_WARN([ignoring LINT environment variable since --with-lint=no was specified])
   fi
else
   AC_MSG_ERROR([--with-lint expects 'yes' or 'no'. Use LINT variable to specify path.])
fi

# User supplied flags override default flags
if test "x$LINT_FLAGS" != "x"; then
   lint_options=$LINT_FLAGS
fi

AC_SUBST([LINT_FLAGS],[$lint_options])
AM_CONDITIONAL(LINT, [test "x$LINT" != x])

]) # XORG_WITH_LINT

# XORG_LINT_LIBRARY(LIBNAME)
# --------------------------
# Minimum version: 1.1.0
#
# Sets up flags for building lint libraries for checking programs that call
# functions in the library.
#
# Interface to module:
# LINTLIB		- Automake variable with the name of lint library file to make
# MAKE_LINT_LIB		- Automake conditional
#
# --enable-lint-library:  - 'yes' user instructs the module to created a lint library
#			  - 'no' user instructs the module not to create a lint library (default)

AC_DEFUN([XORG_LINT_LIBRARY],[
AC_REQUIRE([XORG_WITH_LINT])
AC_ARG_ENABLE(lint-library, [AS_HELP_STRING([--enable-lint-library],
	[Create lint library (default: disabled)])],
	[make_lint_lib=$enableval], [make_lint_lib=no])

if test "x$make_lint_lib" = x"yes" ; then
   LINTLIB=llib-l$1.ln
   if test "x$LINT" = "x"; then
        AC_MSG_ERROR([Cannot make lint library without --with-lint])
   fi
elif test "x$make_lint_lib" != x"no" ; then
   AC_MSG_ERROR([--enable-lint-library expects 'yes' or 'no'.])
fi

AC_SUBST(LINTLIB)
AM_CONDITIONAL(MAKE_LINT_LIB, [test x$make_lint_lib != xno])

]) # XORG_LINT_LIBRARY

# XORG_COMPILER_BRAND
# -------------------
# Minimum version: 1.14.0
#
# Checks for various brands of compilers and sets flags as appropriate:
#   GNU gcc - relies on AC_PROG_CC (via AC_PROG_CC_C99) to set GCC to "yes"
#   GNU g++ - relies on AC_PROG_CXX to set GXX to "yes"
#   clang compiler - sets CLANGCC to "yes"
#   Intel compiler - sets INTELCC to "yes"
#   Sun/Oracle Solaris Studio cc - sets SUNCC to "yes"
#
AC_DEFUN([XORG_COMPILER_BRAND], [
AC_LANG_CASE(
	[C], [
		AC_REQUIRE([AC_PROG_CC_C99])
	],
	[C++], [
		AC_REQUIRE([AC_PROG_CXX])
	]
)
AC_CHECK_DECL([__clang__], [CLANGCC="yes"], [CLANGCC="no"])
AC_CHECK_DECL([__INTEL_COMPILER], [INTELCC="yes"], [INTELCC="no"])
AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"])
]) # XORG_COMPILER_BRAND

# XORG_TESTSET_CFLAG(<variable>, <flag>, [<alternative flag>, ...])
# ---------------
# Minimum version: 1.16.0
#
# Test if the compiler works when passed the given flag as a command line argument.
# If it succeeds, the flag is appeneded to the given variable.  If not, it tries the
# next flag in the list until there are no more options.
#
# Note that this does not guarantee that the compiler supports the flag as some
# compilers will simply ignore arguments that they do not understand, but we do
# attempt to weed out false positives by using -Werror=unknown-warning-option and
# -Werror=unused-command-line-argument
#
AC_DEFUN([XORG_TESTSET_CFLAG], [
m4_if([$#], 0, [m4_fatal([XORG_TESTSET_CFLAG was given with an unsupported number of arguments])])
m4_if([$#], 1, [m4_fatal([XORG_TESTSET_CFLAG was given with an unsupported number of arguments])])

AC_LANG_COMPILER_REQUIRE

AC_LANG_CASE(
	[C], [
		AC_REQUIRE([AC_PROG_CC_C99])
		define([PREFIX], [C])
		define([CACHE_PREFIX], [cc])
		define([COMPILER], [$CC])
	],
	[C++], [
		define([PREFIX], [CXX])
		define([CACHE_PREFIX], [cxx])
		define([COMPILER], [$CXX])
	]
)

[xorg_testset_save_]PREFIX[FLAGS]="$PREFIX[FLAGS]"

if test "x$[xorg_testset_]CACHE_PREFIX[_unknown_warning_option]" = "x" ; then
	PREFIX[FLAGS]="$PREFIX[FLAGS] -Werror=unknown-warning-option"
	AC_CACHE_CHECK([if ]COMPILER[ supports -Werror=unknown-warning-option],
			[xorg_cv_]CACHE_PREFIX[_flag_unknown_warning_option],
			AC_COMPILE_IFELSE([AC_LANG_SOURCE([int i;])],
					  [xorg_cv_]CACHE_PREFIX[_flag_unknown_warning_option=yes],
					  [xorg_cv_]CACHE_PREFIX[_flag_unknown_warning_option=no]))
	[xorg_testset_]CACHE_PREFIX[_unknown_warning_option]=$[xorg_cv_]CACHE_PREFIX[_flag_unknown_warning_option]
	PREFIX[FLAGS]="$[xorg_testset_save_]PREFIX[FLAGS]"
fi

if test "x$[xorg_testset_]CACHE_PREFIX[_unused_command_line_argument]" = "x" ; then
	if test "x$[xorg_testset_]CACHE_PREFIX[_unknown_warning_option]" = "xyes" ; then
		PREFIX[FLAGS]="$PREFIX[FLAGS] -Werror=unknown-warning-option"
	fi
	PREFIX[FLAGS]="$PREFIX[FLAGS] -Werror=unused-command-line-argument"
	AC_CACHE_CHECK([if ]COMPILER[ supports -Werror=unused-command-line-argument],
			[xorg_cv_]CACHE_PREFIX[_flag_unused_command_line_argument],
			AC_COMPILE_IFELSE([AC_LANG_SOURCE([int i;])],
					  [xorg_cv_]CACHE_PREFIX[_flag_unused_command_line_argument=yes],
					  [xorg_cv_]CACHE_PREFIX[_flag_unused_command_line_argument=no]))
	[xorg_testset_]CACHE_PREFIX[_unused_command_line_argument]=$[xorg_cv_]CACHE_PREFIX[_flag_unused_command_line_argument]
	PREFIX[FLAGS]="$[xorg_testset_save_]PREFIX[FLAGS]"
fi

found="no"
m4_foreach([flag], m4_cdr($@), [
	if test $found = "no" ; then
		if test "x$xorg_testset_]CACHE_PREFIX[_unknown_warning_option" = "xyes" ; then
			PREFIX[FLAGS]="$PREFIX[FLAGS] -Werror=unknown-warning-option"
		fi

		if test "x$xorg_testset_]CACHE_PREFIX[_unused_command_line_argument" = "xyes" ; then
			PREFIX[FLAGS]="$PREFIX[FLAGS] -Werror=unused-command-line-argument"
		fi

		PREFIX[FLAGS]="$PREFIX[FLAGS] ]flag["

dnl Some hackery here since AC_CACHE_VAL can't handle a non-literal varname
		AC_MSG_CHECKING([if ]COMPILER[ supports ]flag[])
		cacheid=AS_TR_SH([xorg_cv_]CACHE_PREFIX[_flag_]flag[])
		AC_CACHE_VAL($cacheid,
			     [AC_LINK_IFELSE([AC_LANG_PROGRAM([int i;])],
					     [eval $cacheid=yes],
					     [eval $cacheid=no])])

		PREFIX[FLAGS]="$[xorg_testset_save_]PREFIX[FLAGS]"

		eval supported=\$$cacheid
		AC_MSG_RESULT([$supported])
		if test "$supported" = "yes" ; then
			$1="$$1 ]flag["
			found="yes"
		fi
	fi
])
]) # XORG_TESTSET_CFLAG

# XORG_COMPILER_FLAGS
# ---------------
# Minimum version: 1.16.0
#
# Defines BASE_CFLAGS or BASE_CXXFLAGS to contain a set of command line
# arguments supported by the selected compiler which do NOT alter the generated
# code.  These arguments will cause the compiler to print various warnings
# during compilation AND turn a conservative set of warnings into errors.
#
# The set of flags supported by BASE_CFLAGS and BASE_CXXFLAGS will grow in
# future versions of util-macros as options are added to new compilers.
#
AC_DEFUN([XORG_COMPILER_FLAGS], [
AC_REQUIRE([XORG_COMPILER_BRAND])

AC_ARG_ENABLE(selective-werror,
              AS_HELP_STRING([--disable-selective-werror],
                             [Turn off selective compiler errors. (default: enabled)]),
              [SELECTIVE_WERROR=$enableval],
              [SELECTIVE_WERROR=yes])

AC_LANG_CASE(
        [C], [
                define([PREFIX], [C])
        ],
        [C++], [
                define([PREFIX], [CXX])
        ]
)
# -v is too short to test reliably with XORG_TESTSET_CFLAG
if test "x$SUNCC" = "xyes"; then
    [BASE_]PREFIX[FLAGS]="-v"
else
    [BASE_]PREFIX[FLAGS]=""
fi

# This chunk of warnings were those that existed in the legacy CWARNFLAGS
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wall])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wpointer-arith])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wmissing-declarations])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wformat=2], [-Wformat])

AC_LANG_CASE(
	[C], [
		XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wstrict-prototypes])
		XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wmissing-prototypes])
		XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wnested-externs])
		XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wbad-function-cast])
		XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wold-style-definition], [-fd])
		XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wdeclaration-after-statement])
	]
)

# This chunk adds additional warnings that could catch undesired effects.
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wunused])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wuninitialized])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wshadow])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wmissing-noreturn])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wmissing-format-attribute])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wredundant-decls])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wlogical-op])

# These are currently disabled because they are noisy.  They will be enabled
# in the future once the codebase is sufficiently modernized to silence
# them.  For now, I don't want them to drown out the other warnings.
# XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wparentheses])
# XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wcast-align])
# XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wcast-qual])

# Turn some warnings into errors, so we don't accidently get successful builds
# when there are problems that should be fixed.

if test "x$SELECTIVE_WERROR" = "xyes" ; then
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Werror=implicit], [-errwarn=E_NO_EXPLICIT_TYPE_GIVEN -errwarn=E_NO_IMPLICIT_DECL_ALLOWED])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Werror=nonnull])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Werror=init-self])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Werror=main])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Werror=missing-braces])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Werror=sequence-point])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Werror=return-type], [-errwarn=E_FUNC_HAS_NO_RETURN_STMT])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Werror=trigraphs])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Werror=array-bounds])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Werror=write-strings])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Werror=address])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Werror=int-to-pointer-cast], [-errwarn=E_BAD_PTR_INT_COMBINATION])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Werror=pointer-to-int-cast]) # Also -errwarn=E_BAD_PTR_INT_COMBINATION
else
AC_MSG_WARN([You have chosen not to turn some select compiler warnings into errors.  This should not be necessary.  Please report why you needed to do so in a bug report at $PACKAGE_BUGREPORT])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wimplicit])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wnonnull])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Winit-self])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wmain])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wmissing-braces])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wsequence-point])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wreturn-type])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wtrigraphs])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Warray-bounds])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wwrite-strings])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Waddress])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wint-to-pointer-cast])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wpointer-to-int-cast])
fi

AC_SUBST([BASE_]PREFIX[FLAGS])
]) # XORG_COMPILER_FLAGS

# XORG_CWARNFLAGS
# ---------------
# Minimum version: 1.2.0
# Deprecated since: 1.16.0 (Use XORG_COMPILER_FLAGS instead)
#
# Defines CWARNFLAGS to enable C compiler warnings.
#
# This function is deprecated because it defines -fno-strict-aliasing
# which alters the code generated by the compiler.  If -fno-strict-aliasing
# is needed, then it should be added explicitly in the module when
# it is updated to use BASE_CFLAGS.
#
AC_DEFUN([XORG_CWARNFLAGS], [
AC_REQUIRE([XORG_COMPILER_FLAGS])
AC_REQUIRE([XORG_COMPILER_BRAND])
AC_LANG_CASE(
	[C], [
		CWARNFLAGS="$BASE_CFLAGS"
		if  test "x$GCC" = xyes ; then
		    CWARNFLAGS="$CWARNFLAGS -fno-strict-aliasing"
		fi
		AC_SUBST(CWARNFLAGS)
	]
)
]) # XORG_CWARNFLAGS

# XORG_STRICT_OPTION
# -----------------------
# Minimum version: 1.3.0
#
# Add configure option to enable strict compilation flags, such as treating
# warnings as fatal errors.
# If --enable-strict-compilation is passed to configure, adds strict flags to
# $BASE_CFLAGS or $BASE_CXXFLAGS and the deprecated $CWARNFLAGS.
#
# Starting in 1.14.0 also exports $STRICT_CFLAGS for use in other tests or
# when strict compilation is unconditionally desired.
AC_DEFUN([XORG_STRICT_OPTION], [
AC_REQUIRE([XORG_CWARNFLAGS])
AC_REQUIRE([XORG_COMPILER_FLAGS])

AC_ARG_ENABLE(strict-compilation,
			  AS_HELP_STRING([--enable-strict-compilation],
			  [Enable all warnings from compiler and make them errors (default: disabled)]),
			  [STRICT_COMPILE=$enableval], [STRICT_COMPILE=no])

AC_LANG_CASE(
        [C], [
                define([PREFIX], [C])
        ],
        [C++], [
                define([PREFIX], [CXX])
        ]
)

[STRICT_]PREFIX[FLAGS]=""
XORG_TESTSET_CFLAG([[STRICT_]PREFIX[FLAGS]], [-pedantic])
XORG_TESTSET_CFLAG([[STRICT_]PREFIX[FLAGS]], [-Werror], [-errwarn])

# Earlier versions of gcc (eg: 4.2) support -Werror=attributes, but do not
# activate it with -Werror, so we add it here explicitly.
XORG_TESTSET_CFLAG([[STRICT_]PREFIX[FLAGS]], [-Werror=attributes])

if test "x$STRICT_COMPILE" = "xyes"; then
    [BASE_]PREFIX[FLAGS]="$[BASE_]PREFIX[FLAGS] $[STRICT_]PREFIX[FLAGS]"
    AC_LANG_CASE([C], [CWARNFLAGS="$CWARNFLAGS $STRICT_CFLAGS"])
fi
AC_SUBST([STRICT_]PREFIX[FLAGS])
AC_SUBST([BASE_]PREFIX[FLAGS])
AC_LANG_CASE([C], AC_SUBST([CWARNFLAGS]))
]) # XORG_STRICT_OPTION

# XORG_DEFAULT_OPTIONS
# --------------------
# Minimum version: 1.3.0
#
# Defines default options for X.Org modules.
#
AC_DEFUN([XORG_DEFAULT_OPTIONS], [
AC_REQUIRE([AC_PROG_INSTALL])
XORG_COMPILER_FLAGS
XORG_CWARNFLAGS
XORG_STRICT_OPTION
XORG_RELEASE_VERSION
XORG_CHANGELOG
XORG_INSTALL
XORG_MANPAGE_SECTIONS
m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])],
    [AC_SUBST([AM_DEFAULT_VERBOSITY], [1])])
]) # XORG_DEFAULT_OPTIONS

# XORG_INSTALL()
# ----------------
# Minimum version: 1.4.0
#
# Defines the variable INSTALL_CMD as the command to copy
# INSTALL from $prefix/share/util-macros.
#
AC_DEFUN([XORG_INSTALL], [
AC_REQUIRE([PKG_PROG_PKG_CONFIG])
macros_datadir=`$PKG_CONFIG --print-errors --variable=pkgdatadir xorg-macros`
INSTALL_CMD="(cp -f "$macros_datadir/INSTALL" \$(top_srcdir)/.INSTALL.tmp && \
mv \$(top_srcdir)/.INSTALL.tmp \$(top_srcdir)/INSTALL) \
|| (rm -f \$(top_srcdir)/.INSTALL.tmp; test -e \$(top_srcdir)/INSTALL || ( \
touch \$(top_srcdir)/INSTALL; \
echo 'failed to copy INSTALL from util-macros: installing empty INSTALL.' >&2))"
AC_SUBST([INSTALL_CMD])
]) # XORG_INSTALL
dnl Copyright 2005 Red Hat, Inc
dnl
dnl Permission to use, copy, modify, distribute, and sell this software and its
dnl documentation for any purpose is hereby granted without fee, provided that
dnl the above copyright notice appear in all copies and that both that
dnl copyright notice and this permission notice appear in supporting
dnl documentation.
dnl
dnl The above copyright notice and this permission notice shall be included
dnl in all copies or substantial portions of the Software.
dnl
dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
dnl OTHER DEALINGS IN THE SOFTWARE.
dnl
dnl Except as contained in this notice, the name of the copyright holders shall
dnl not be used in advertising or otherwise to promote the sale, use or
dnl other dealings in this Software without prior written authorization
dnl from the copyright holders.
dnl

# XORG_RELEASE_VERSION
# --------------------
# Defines PACKAGE_VERSION_{MAJOR,MINOR,PATCHLEVEL} for modules to use.

AC_DEFUN([XORG_RELEASE_VERSION],[
	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR],
		[`echo $PACKAGE_VERSION | cut -d . -f 1`],
		[Major version of this package])
	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
	if test "x$PVM" = "x"; then
		PVM="0"
	fi
	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR],
		[$PVM],
		[Minor version of this package])
	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
	if test "x$PVP" = "x"; then
		PVP="0"
	fi
	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL],
		[$PVP],
		[Patch version of this package])
])

# XORG_CHANGELOG()
# ----------------
# Minimum version: 1.2.0
#
# Defines the variable CHANGELOG_CMD as the command to generate
# ChangeLog from git.
#
#
AC_DEFUN([XORG_CHANGELOG], [
CHANGELOG_CMD="((GIT_DIR=\$(top_srcdir)/.git git log > \$(top_srcdir)/.changelog.tmp) 2>/dev/null && \
mv \$(top_srcdir)/.changelog.tmp \$(top_srcdir)/ChangeLog) \
|| (rm -f \$(top_srcdir)/.changelog.tmp; test -e \$(top_srcdir)/ChangeLog || ( \
touch \$(top_srcdir)/ChangeLog; \
echo 'git failed to create ChangeLog: installing empty ChangeLog.' >&2))"
AC_SUBST([CHANGELOG_CMD])
]) # XORG_CHANGELOG

# Copyright (C) 2002-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
[am__api_version='1.16'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version.  Point them to the right macro.
m4_if([$1], [1.16.5], [],
      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])

# _AM_AUTOCONF_VERSION(VERSION)
# -----------------------------
# aclocal traces this macro to find the Autoconf version.
# This is a private macro too.  Using m4_define simplifies
# the logic in aclocal, which can simply ignore this definition.
m4_define([_AM_AUTOCONF_VERSION], [])

# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.16.5])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])

# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-

# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory.  The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run.  This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
#    fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
#    fails if $ac_aux_dir is absolute,
#    fails when called from a subdirectory in a VPATH build with
#          a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir.  In an in-source build this is usually
# harmless because $srcdir is '.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
#   MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH.  The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.

AC_DEFUN([AM_AUX_DIR_EXPAND],
[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
# Expand $ac_aux_dir to an absolute path.
am_aux_dir=`cd "$ac_aux_dir" && pwd`
])

# AM_CONDITIONAL                                            -*- Autoconf -*-

# Copyright (C) 1997-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ([2.52])dnl
 m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
m4_define([_AM_COND_VALUE_$1], [$2])dnl
if $2; then
  $1_TRUE=
  $1_FALSE='#'
else
  $1_TRUE='#'
  $1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
  AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])

# Copyright (C) 1999-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.


# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery.  Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...


# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl

m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                    [depcc="$$1"   am_compiler_list=])

AC_CACHE_CHECK([dependency style of $depcc],
               [am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
  # We make a subdir and do the tests there.  Otherwise we can end up
  # making bogus files that we don't know about and never remove.  For
  # instance it was reported that on HP-UX the gcc test will end up
  # making a dummy file named 'D' -- because '-MD' means "put the output
  # in D".
  rm -rf conftest.dir
  mkdir conftest.dir
  # Copy depcomp to subdir because otherwise we won't find it if we're
  # using a relative directory.
  cp "$am_depcomp" conftest.dir
  cd conftest.dir
  # We will build objects and dependencies in a subdirectory because
  # it helps to detect inapplicable dependency modes.  For instance
  # both Tru64's cc and ICC support -MD to output dependencies as a
  # side effect of compilation, but ICC will put the dependencies in
  # the current directory while Tru64 will put them in the object
  # directory.
  mkdir sub

  am_cv_$1_dependencies_compiler_type=none
  if test "$am_compiler_list" = ""; then
     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
  fi
  am__universal=false
  m4_case([$1], [CC],
    [case " $depcc " in #(
     *\ -arch\ *\ -arch\ *) am__universal=true ;;
     esac],
    [CXX],
    [case " $depcc " in #(
     *\ -arch\ *\ -arch\ *) am__universal=true ;;
     esac])

  for depmode in $am_compiler_list; do
    # Setup a source with many dependencies, because some compilers
    # like to wrap large dependency lists on column 80 (with \), and
    # we should not choose a depcomp mode which is confused by this.
    #
    # We need to recreate these files for each test, as the compiler may
    # overwrite some of them when testing with obscure command lines.
    # This happens at least with the AIX C compiler.
    : > sub/conftest.c
    for i in 1 2 3 4 5 6; do
      echo '#include "conftst'$i'.h"' >> sub/conftest.c
      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
      # Solaris 10 /bin/sh.
      echo '/* dummy */' > sub/conftst$i.h
    done
    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf

    # We check with '-c' and '-o' for the sake of the "dashmstdout"
    # mode.  It turns out that the SunPro C++ compiler does not properly
    # handle '-M -o', and we need to detect this.  Also, some Intel
    # versions had trouble with output in subdirs.
    am__obj=sub/conftest.${OBJEXT-o}
    am__minus_obj="-o $am__obj"
    case $depmode in
    gcc)
      # This depmode causes a compiler race in universal mode.
      test "$am__universal" = false || continue
      ;;
    nosideeffect)
      # After this tag, mechanisms are not by side-effect, so they'll
      # only be used when explicitly requested.
      if test "x$enable_dependency_tracking" = xyes; then
	continue
      else
	break
      fi
      ;;
    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
      # This compiler won't grok '-c -o', but also, the minuso test has
      # not run yet.  These depmodes are late enough in the game, and
      # so weak that their functioning should not be impacted.
      am__obj=conftest.${OBJEXT-o}
      am__minus_obj=
      ;;
    none) break ;;
    esac
    if depmode=$depmode \
       source=sub/conftest.c object=$am__obj \
       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
         >/dev/null 2>conftest.err &&
       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
      # icc doesn't choke on unknown options, it will just issue warnings
      # or remarks (even with -Werror).  So we grep stderr for any message
      # that says an option was ignored or not supported.
      # When given -MP, icc 7.0 and 7.1 complain thusly:
      #   icc: Command line warning: ignoring option '-M'; no argument required
      # The diagnosis changed in icc 8.0:
      #   icc: Command line remark: option '-MP' not supported
      if (grep 'ignoring option' conftest.err ||
          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
        am_cv_$1_dependencies_compiler_type=$depmode
        break
      fi
    fi
  done

  cd ..
  rm -rf conftest.dir
else
  am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
  test "x$enable_dependency_tracking" != xno \
  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])


# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])


# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE([dependency-tracking], [dnl
AS_HELP_STRING(
  [--enable-dependency-tracking],
  [do not reject slow dependency extractors])
AS_HELP_STRING(
  [--disable-dependency-tracking],
  [speeds up one-time build])])
if test "x$enable_dependency_tracking" != xno; then
  am_depcomp="$ac_aux_dir/depcomp"
  AMDEPBACKSLASH='\'
  am__nodep='_no'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])dnl
_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
AC_SUBST([am__nodep])dnl
_AM_SUBST_NOTMAKE([am__nodep])dnl
])

# Generate code to set up dependency tracking.              -*- Autoconf -*-

# Copyright (C) 1999-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[{
  # Older Autoconf quotes --file arguments for eval, but not when files
  # are listed without --file.  Let's play safe and only enable the eval
  # if we detect the quoting.
  # TODO: see whether this extra hack can be removed once we start
  # requiring Autoconf 2.70 or later.
  AS_CASE([$CONFIG_FILES],
          [*\'*], [eval set x "$CONFIG_FILES"],
          [*], [set x $CONFIG_FILES])
  shift
  # Used to flag and report bootstrapping failures.
  am_rc=0
  for am_mf
  do
    # Strip MF so we end up with the name of the file.
    am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
    # Check whether this is an Automake generated Makefile which includes
    # dependency-tracking related rules and includes.
    # Grep'ing the whole file directly is not great: AIX grep has a line
    # limit of 2048, but all sed's we know have understand at least 4000.
    sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
      || continue
    am_dirpart=`AS_DIRNAME(["$am_mf"])`
    am_filepart=`AS_BASENAME(["$am_mf"])`
    AM_RUN_LOG([cd "$am_dirpart" \
      && sed -e '/# am--include-marker/d' "$am_filepart" \
        | $MAKE -f - am--depfiles]) || am_rc=$?
  done
  if test $am_rc -ne 0; then
    AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments
    for automatic dependency tracking.  If GNU make was not used, consider
    re-running the configure script with MAKE="gmake" (or whatever is
    necessary).  You can also try re-running configure with the
    '--disable-dependency-tracking' option to at least be able to build
    the package (albeit without support for automatic dependency tracking).])
  fi
  AS_UNSET([am_dirpart])
  AS_UNSET([am_filepart])
  AS_UNSET([am_mf])
  AS_UNSET([am_rc])
  rm -f conftest-deps.mk
}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS


# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking is enabled.
# This creates each '.Po' and '.Plo' makefile fragment that we'll need in
# order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
     [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])])

# Do all the work for Automake.                             -*- Autoconf -*-

# Copyright (C) 1996-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This macro actually does too much.  Some checks are only needed if
# your package does certain things.  But this isn't really a big deal.

dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
m4_define([AC_PROG_CC],
m4_defn([AC_PROG_CC])
[_AM_PROG_CC_C_O
])

# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out.  PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition.  After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_PREREQ([2.65])dnl
m4_ifdef([_$0_ALREADY_INIT],
  [m4_fatal([$0 expanded multiple times
]m4_defn([_$0_ALREADY_INIT]))],
  [m4_define([_$0_ALREADY_INIT], m4_expansion_stack)])dnl
dnl Autoconf wants to disallow AM_ names.  We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
if test "`cd $srcdir && pwd`" != "`pwd`"; then
  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
  # is not polluted with repeated "-I."
  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
  # test to see if srcdir already configured
  if test -f $srcdir/config.status; then
    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
  fi
fi

# test whether we have cygpath
if test -z "$CYGPATH_W"; then
  if (cygpath --version) >/dev/null 2>/dev/null; then
    CYGPATH_W='cygpath -w'
  else
    CYGPATH_W=echo
  fi
fi
AC_SUBST([CYGPATH_W])

# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[AC_DIAGNOSE([obsolete],
             [$0: two- and three-arguments forms are deprecated.])
m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
 AC_SUBST([PACKAGE], [$1])dnl
 AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
m4_if(
  m4_ifset([AC_PACKAGE_NAME], [ok]):m4_ifset([AC_PACKAGE_VERSION], [ok]),
  [ok:ok],,
  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
 AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
 AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl

_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
 AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl

# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
AM_MISSING_PROG([AUTOCONF], [autoconf])
AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
AM_MISSING_PROG([AUTOHEADER], [autoheader])
AM_MISSING_PROG([MAKEINFO], [makeinfo])
AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
AC_REQUIRE([AC_PROG_MKDIR_P])dnl
# For better backward compatibility.  To be removed once Automake 1.9.x
# dies out for good.  For more background, see:
# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
# We need awk for the "check" target (and possibly the TAP driver).  The
# system "awk" is bad on some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
			     [_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
		  [_AM_DEPENDENCIES([CC])],
		  [m4_define([AC_PROG_CC],
			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
		  [_AM_DEPENDENCIES([CXX])],
		  [m4_define([AC_PROG_CXX],
			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
		  [_AM_DEPENDENCIES([OBJC])],
		  [m4_define([AC_PROG_OBJC],
			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
		  [_AM_DEPENDENCIES([OBJCXX])],
		  [m4_define([AC_PROG_OBJCXX],
			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
])
# Variables for tags utilities; see am/tags.am
if test -z "$CTAGS"; then
  CTAGS=ctags
fi
AC_SUBST([CTAGS])
if test -z "$ETAGS"; then
  ETAGS=etags
fi
AC_SUBST([ETAGS])
if test -z "$CSCOPE"; then
  CSCOPE=cscope
fi
AC_SUBST([CSCOPE])

AC_REQUIRE([AM_SILENT_RULES])dnl
dnl The testsuite driver may need to know about EXEEXT, so add the
dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl

# POSIX will say in a future version that running "rm -f" with no argument
# is OK; and we want to be able to make that assumption in our Makefile
# recipes.  So use an aggressive probe to check that the usage we want is
# actually supported "in the wild" to an acceptable degree.
# See automake bug#10828.
# To make any issue more visible, cause the running configure to be aborted
# by default if the 'rm' program in use doesn't match our expectations; the
# user can still override this though.
if rm -f && rm -fr && rm -rf; then : OK; else
  cat >&2 <<'END'
Oops!

Your 'rm' program seems unable to run without file operands specified
on the command line, even when the '-f' option is present.  This is contrary
to the behaviour of most rm programs out there, and not conforming with
the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>

Please tell bug-automake@gnu.org about your system, including the value
of your $PATH and any error possibly output before this message.  This
can help us improve future automake versions.

END
  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
    echo 'Configuration will proceed anyway, since you have set the' >&2
    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
    echo >&2
  else
    cat >&2 <<'END'
Aborting the configuration process, to ensure you take notice of the issue.

You can download and install GNU coreutils to get an 'rm' implementation
that behaves properly: <https://www.gnu.org/software/coreutils/>.

If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
to "yes", and re-run configure.

END
    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
  fi
fi
dnl The trailing newline in this macro's definition is deliberate, for
dnl backward compatibility and to allow trailing 'dnl'-style comments
dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
])

dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
dnl mangled by Autoconf and run in a shell conditional statement.
m4_define([_AC_COMPILER_EXEEXT],
m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])

# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated.  The stamp files are numbered to have different names.

# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
# loop where config.status creates the headers, so we can generate
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
_am_arg=$1
_am_stamp_count=1
for _am_header in $config_headers :; do
  case $_am_header in
    $_am_arg | $_am_arg:* )
      break ;;
    * )
      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
  esac
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])

# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
if test x"${install_sh+set}" != xset; then
  case $am_aux_dir in
  *\ * | *\	*)
    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
  *)
    install_sh="\${SHELL} $am_aux_dir/install-sh"
  esac
fi
AC_SUBST([install_sh])])

# Copyright (C) 2003-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# Check whether the underlying file-system supports filenames
# with a leading dot.  For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
[rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
  am__leading_dot=.
else
  am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])

# Check to see how 'make' treats includes.	            -*- Autoconf -*-

# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_MAKE_INCLUDE()
# -----------------
# Check whether make has an 'include' directive that can support all
# the idioms we need for our automatic dependency tracking code.
AC_DEFUN([AM_MAKE_INCLUDE],
[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive])
cat > confinc.mk << 'END'
am__doit:
	@echo this is the am__doit target >confinc.out
.PHONY: am__doit
END
am__include="#"
am__quote=
# BSD make does it like this.
echo '.include "confinc.mk" # ignored' > confmf.BSD
# Other make implementations (GNU, Solaris 10, AIX) do it like this.
echo 'include confinc.mk # ignored' > confmf.GNU
_am_result=no
for s in GNU BSD; do
  AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out])
  AS_CASE([$?:`cat confinc.out 2>/dev/null`],
      ['0:this is the am__doit target'],
      [AS_CASE([$s],
          [BSD], [am__include='.include' am__quote='"'],
          [am__include='include' am__quote=''])])
  if test "$am__include" != "#"; then
    _am_result="yes ($s style)"
    break
  fi
done
rm -f confinc.* confmf.*
AC_MSG_RESULT([${_am_result}])
AC_SUBST([am__include])])
AC_SUBST([am__quote])])

# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-

# Copyright (C) 1997-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])

# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it is modern enough.
# If it is, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
if test x"${MISSING+set}" != xset; then
  MISSING="\${SHELL} '$am_aux_dir/missing'"
fi
# Use eval to expand $SHELL
if eval "$MISSING --is-lightweight"; then
  am_missing_run="$MISSING "
else
  am_missing_run=
  AC_MSG_WARN(['missing' script is too old or missing])
fi
])

# Helper functions for option handling.                     -*- Autoconf -*-

# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])

# _AM_SET_OPTION(NAME)
# --------------------
# Set option NAME.  Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), [1])])

# _AM_SET_OPTIONS(OPTIONS)
# ------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])

# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])

# Copyright (C) 1999-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# _AM_PROG_CC_C_O
# ---------------
# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
# to automatically call this.
AC_DEFUN([_AM_PROG_CC_C_O],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([compile])dnl
AC_LANG_PUSH([C])dnl
AC_CACHE_CHECK(
  [whether $CC understands -c and -o together],
  [am_cv_prog_cc_c_o],
  [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
  # Make sure it works both with $CC and with simple cc.
  # Following AC_PROG_CC_C_O, we do the test twice because some
  # compilers refuse to overwrite an existing .o file with -o,
  # though they will create one.
  am_cv_prog_cc_c_o=yes
  for am_i in 1 2; do
    if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
         && test -f conftest2.$ac_objext; then
      : OK
    else
      am_cv_prog_cc_c_o=no
      break
    fi
  done
  rm -f core conftest*
  unset am_i])
if test "$am_cv_prog_cc_c_o" != yes; then
   # Losing compiler, so override with the script.
   # FIXME: It is wrong to rewrite CC.
   # But if we don't then we get into trouble of one sort or another.
   # A longer-term fix would be to have automake use am__CC in this case,
   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
   CC="$am_aux_dir/compile $CC"
fi
AC_LANG_POP([C])])

# For backward compatibility.
AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])

# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_RUN_LOG(COMMAND)
# -------------------
# Run COMMAND, save the exit status in ac_status, and log it.
# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
AC_DEFUN([AM_RUN_LOG],
[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
   (exit $ac_status); }])

# Check to make sure that the build environment is sane.    -*- Autoconf -*-

# Copyright (C) 1996-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Reject unsafe characters in $srcdir or the absolute working directory
# name.  Accept space and tab only in the latter.
am_lf='
'
case `pwd` in
  *[[\\\"\#\$\&\'\`$am_lf]]*)
    AC_MSG_ERROR([unsafe absolute working directory name]);;
esac
case $srcdir in
  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
esac

# Do 'set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   am_has_slept=no
   for am_try in 1 2; do
     echo "timestamp, slept: $am_has_slept" > conftest.file
     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
     if test "$[*]" = "X"; then
	# -L didn't work.
	set X `ls -t "$srcdir/configure" conftest.file`
     fi
     if test "$[*]" != "X $srcdir/configure conftest.file" \
	&& test "$[*]" != "X conftest.file $srcdir/configure"; then

	# If neither matched, then we have a broken ls.  This can happen
	# if, for instance, CONFIG_SHELL is bash and it inherits a
	# broken ls alias from the environment.  This has actually
	# happened.  Such a system could not be considered "sane".
	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
  alias in your environment])
     fi
     if test "$[2]" = conftest.file || test $am_try -eq 2; then
       break
     fi
     # Just in case.
     sleep 1
     am_has_slept=yes
   done
   test "$[2]" = conftest.file
   )
then
   # Ok.
   :
else
   AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT([yes])
# If we didn't sleep, we still need to ensure time stamps of config.status and
# generated files are strictly newer.
am_sleep_pid=
if grep 'slept: no' conftest.file >/dev/null 2>&1; then
  ( sleep 1 ) &
  am_sleep_pid=$!
fi
AC_CONFIG_COMMANDS_PRE(
  [AC_MSG_CHECKING([that generated files are newer than configure])
   if test -n "$am_sleep_pid"; then
     # Hide warnings about reused PIDs.
     wait $am_sleep_pid 2>/dev/null
   fi
   AC_MSG_RESULT([done])])
rm -f conftest.file
])

# Copyright (C) 2009-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_SILENT_RULES([DEFAULT])
# --------------------------
# Enable less verbose build rules; with the default set to DEFAULT
# ("yes" being less verbose, "no" or empty being verbose).
AC_DEFUN([AM_SILENT_RULES],
[AC_ARG_ENABLE([silent-rules], [dnl
AS_HELP_STRING(
  [--enable-silent-rules],
  [less verbose build output (undo: "make V=1")])
AS_HELP_STRING(
  [--disable-silent-rules],
  [verbose build output (undo: "make V=0")])dnl
])
case $enable_silent_rules in @%:@ (((
  yes) AM_DEFAULT_VERBOSITY=0;;
   no) AM_DEFAULT_VERBOSITY=1;;
    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
esac
dnl
dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
dnl do not support nested variable expansions.
dnl See automake bug#9928 and bug#10237.
am_make=${MAKE-make}
AC_CACHE_CHECK([whether $am_make supports nested variables],
   [am_cv_make_support_nested_variables],
   [if AS_ECHO([['TRUE=$(BAR$(V))
BAR0=false
BAR1=true
V=1
am__doit:
	@$(TRUE)
.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
  am_cv_make_support_nested_variables=yes
else
  am_cv_make_support_nested_variables=no
fi])
if test $am_cv_make_support_nested_variables = yes; then
  dnl Using '$V' instead of '$(V)' breaks IRIX make.
  AM_V='$(V)'
  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
else
  AM_V=$AM_DEFAULT_VERBOSITY
  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
fi
AC_SUBST([AM_V])dnl
AM_SUBST_NOTMAKE([AM_V])dnl
AC_SUBST([AM_DEFAULT_V])dnl
AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
AM_BACKSLASH='\'
AC_SUBST([AM_BACKSLASH])dnl
_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
])

# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor 'install' (even GNU) is that you can't
# specify the program used to strip binaries.  This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in "make install-strip", and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using 'strip' when the user
# run "make install-strip".  However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the 'STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
if test "$cross_compiling" != no; then
  AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])

# Copyright (C) 2006-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
# This macro is traced by Automake.
AC_DEFUN([_AM_SUBST_NOTMAKE])

# AM_SUBST_NOTMAKE(VARIABLE)
# --------------------------
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])

# Check how to create a tarball.                            -*- Autoconf -*-

# Copyright (C) 2004-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of 'v7', 'ustar', or 'pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
#     tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
#     $(am__untar) < result.tar
#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility.  Yes, it's still used
# in the wild :-(  We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])

# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'

m4_if([$1], [v7],
  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],

  [m4_case([$1],
    [ustar],
     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
      # There is notably a 21 bits limit for the UID and the GID.  In fact,
      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
      # and bug#13588).
      am_max_uid=2097151 # 2^21 - 1
      am_max_gid=$am_max_uid
      # The $UID and $GID variables are not portable, so we need to resort
      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
      # below are definitely unexpected, so allow the users to see them
      # (that is, avoid stderr redirection).
      am_uid=`id -u || echo unknown`
      am_gid=`id -g || echo unknown`
      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
      if test $am_uid -le $am_max_uid; then
         AC_MSG_RESULT([yes])
      else
         AC_MSG_RESULT([no])
         _am_tools=none
      fi
      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
      if test $am_gid -le $am_max_gid; then
         AC_MSG_RESULT([yes])
      else
        AC_MSG_RESULT([no])
        _am_tools=none
      fi],

  [pax],
    [],

  [m4_fatal([Unknown tar format])])

  AC_MSG_CHECKING([how to create a $1 tar archive])

  # Go ahead even if we have the value already cached.  We do so because we
  # need to set the values for the 'am__tar' and 'am__untar' variables.
  _am_tools=${am_cv_prog_tar_$1-$_am_tools}

  for _am_tool in $_am_tools; do
    case $_am_tool in
    gnutar)
      for _am_tar in tar gnutar gtar; do
        AM_RUN_LOG([$_am_tar --version]) && break
      done
      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
      am__untar="$_am_tar -xf -"
      ;;
    plaintar)
      # Must skip GNU tar: if it does not support --format= it doesn't create
      # ustar tarball either.
      (tar --version) >/dev/null 2>&1 && continue
      am__tar='tar chf - "$$tardir"'
      am__tar_='tar chf - "$tardir"'
      am__untar='tar xf -'
      ;;
    pax)
      am__tar='pax -L -x $1 -w "$$tardir"'
      am__tar_='pax -L -x $1 -w "$tardir"'
      am__untar='pax -r'
      ;;
    cpio)
      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
      am__untar='cpio -i -H $1 -d'
      ;;
    none)
      am__tar=false
      am__tar_=false
      am__untar=false
      ;;
    esac

    # If the value was cached, stop now.  We just wanted to have am__tar
    # and am__untar set.
    test -n "${am_cv_prog_tar_$1}" && break

    # tar/untar a dummy directory, and stop if the command works.
    rm -rf conftest.dir
    mkdir conftest.dir
    echo GrepMe > conftest.dir/file
    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
    rm -rf conftest.dir
    if test -s conftest.tar; then
      AM_RUN_LOG([$am__untar <conftest.tar])
      AM_RUN_LOG([cat conftest.dir/file])
      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
    fi
  done
  rm -rf conftest.dir

  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
  AC_MSG_RESULT([$am_cv_prog_tar_$1])])

AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR