Makefile.in revision 309c398a 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18#
19#  Copyright 2005  Red Hat, Inc.
20#
21#  Permission to use, copy, modify, distribute, and sell this software and its
22#  documentation for any purpose is hereby granted without fee, provided that
23#  the above copyright notice appear in all copies and that both that
24#  copyright notice and this permission notice appear in supporting
25#  documentation, and that the name of Red Hat not be used in
26#  advertising or publicity pertaining to distribution of the software without
27#  specific, written prior permission.  Red Hat makes no
28#  representations about the suitability of this software for any purpose.  It
29#  is provided "as is" without express or implied warranty.
30#
31#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
32#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
33#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
34#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
35#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
36#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
37#  PERFORMANCE OF THIS SOFTWARE.
38
39
40VPATH = @srcdir@
41pkgdatadir = $(datadir)/@PACKAGE@
42pkgincludedir = $(includedir)/@PACKAGE@
43pkglibdir = $(libdir)/@PACKAGE@
44pkglibexecdir = $(libexecdir)/@PACKAGE@
45am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
46install_sh_DATA = $(install_sh) -c -m 644
47install_sh_PROGRAM = $(install_sh) -c
48install_sh_SCRIPT = $(install_sh) -c
49INSTALL_HEADER = $(INSTALL_DATA)
50transform = $(program_transform_name)
51NORMAL_INSTALL = :
52PRE_INSTALL = :
53POST_INSTALL = :
54NORMAL_UNINSTALL = :
55PRE_UNINSTALL = :
56POST_UNINSTALL = :
57build_triplet = @build@
58host_triplet = @host@
59bin_PROGRAMS = xclock$(EXEEXT)
60subdir = .
61DIST_COMMON = README $(am__configure_deps) $(dist_appdefault_DATA) \
62	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
63	$(srcdir)/config.h.in $(top_srcdir)/configure COPYING \
64	ChangeLog INSTALL config.guess config.rpath config.sub depcomp \
65	install-sh missing
66ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
67am__aclocal_m4_deps = $(top_srcdir)/configure.ac
68am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
69	$(ACLOCAL_M4)
70am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
71 configure.lineno config.status.lineno
72mkinstalldirs = $(install_sh) -d
73CONFIG_HEADER = config.h
74CONFIG_CLEAN_FILES =
75CONFIG_CLEAN_VPATH_FILES =
76am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)"
77PROGRAMS = $(bin_PROGRAMS)
78am_xclock_OBJECTS = Clock.$(OBJEXT) xclock.$(OBJEXT)
79xclock_OBJECTS = $(am_xclock_OBJECTS)
80am__DEPENDENCIES_1 =
81xclock_DEPENDENCIES = $(am__DEPENDENCIES_1)
82DEFAULT_INCLUDES = -I.@am__isrc@
83depcomp = $(SHELL) $(top_srcdir)/depcomp
84am__depfiles_maybe = depfiles
85am__mv = mv -f
86COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
87	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
88AM_V_CC = $(am__v_CC_$(V))
89am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
90am__v_CC_0 = @echo "  CC    " $@;
91AM_V_at = $(am__v_at_$(V))
92am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
93am__v_at_0 = @
94CCLD = $(CC)
95LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
96AM_V_CCLD = $(am__v_CCLD_$(V))
97am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
98am__v_CCLD_0 = @echo "  CCLD  " $@;
99AM_V_GEN = $(am__v_GEN_$(V))
100am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
101am__v_GEN_0 = @echo "  GEN   " $@;
102SOURCES = $(xclock_SOURCES)
103DIST_SOURCES = $(xclock_SOURCES)
104RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
105	html-recursive info-recursive install-data-recursive \
106	install-dvi-recursive install-exec-recursive \
107	install-html-recursive install-info-recursive \
108	install-pdf-recursive install-ps-recursive install-recursive \
109	installcheck-recursive installdirs-recursive pdf-recursive \
110	ps-recursive uninstall-recursive
111am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
112am__vpath_adj = case $$p in \
113    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
114    *) f=$$p;; \
115  esac;
116am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
117am__install_max = 40
118am__nobase_strip_setup = \
119  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
120am__nobase_strip = \
121  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
122am__nobase_list = $(am__nobase_strip_setup); \
123  for p in $$list; do echo "$$p $$p"; done | \
124  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
125  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
126    if (++n[$$2] == $(am__install_max)) \
127      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
128    END { for (dir in files) print dir, files[dir] }'
129am__base_list = \
130  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
131  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
132DATA = $(dist_appdefault_DATA)
133RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
134  distclean-recursive maintainer-clean-recursive
135AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
136	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
137	distdir dist dist-all distcheck
138ETAGS = etags
139CTAGS = ctags
140DIST_SUBDIRS = $(SUBDIRS)
141DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
142distdir = $(PACKAGE)-$(VERSION)
143top_distdir = $(distdir)
144am__remove_distdir = \
145  { test ! -d "$(distdir)" \
146    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
147         && rm -fr "$(distdir)"; }; }
148am__relativize = \
149  dir0=`pwd`; \
150  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
151  sed_rest='s,^[^/]*/*,,'; \
152  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
153  sed_butlast='s,/*[^/]*$$,,'; \
154  while test -n "$$dir1"; do \
155    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
156    if test "$$first" != "."; then \
157      if test "$$first" = ".."; then \
158        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
159        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
160      else \
161        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
162        if test "$$first2" = "$$first"; then \
163          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
164        else \
165          dir2="../$$dir2"; \
166        fi; \
167        dir0="$$dir0"/"$$first"; \
168      fi; \
169    fi; \
170    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
171  done; \
172  reldir="$$dir2"
173DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
174GZIP_ENV = --best
175distuninstallcheck_listfiles = find . -type f -print
176distcleancheck_listfiles = find . -type f -print
177ACLOCAL = @ACLOCAL@
178ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
179ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
180AMTAR = @AMTAR@
181AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
182APPDEFS_CFLAGS = @APPDEFS_CFLAGS@
183APPDEFS_LIBS = @APPDEFS_LIBS@
184APP_MAN_DIR = @APP_MAN_DIR@
185APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
186AUTOCONF = @AUTOCONF@
187AUTOHEADER = @AUTOHEADER@
188AUTOMAKE = @AUTOMAKE@
189AWK = @AWK@
190BASE_CFLAGS = @BASE_CFLAGS@
191CC = @CC@
192CCDEPMODE = @CCDEPMODE@
193CFLAGS = @CFLAGS@
194CHANGELOG_CMD = @CHANGELOG_CMD@
195CPP = @CPP@
196CPPFLAGS = @CPPFLAGS@
197CWARNFLAGS = @CWARNFLAGS@
198CYGPATH_W = @CYGPATH_W@
199DEFS = @DEFS@
200DEPDIR = @DEPDIR@
201DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
202DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
203ECHO_C = @ECHO_C@
204ECHO_N = @ECHO_N@
205ECHO_T = @ECHO_T@
206EGREP = @EGREP@
207EXEEXT = @EXEEXT@
208FILE_MAN_DIR = @FILE_MAN_DIR@
209FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
210GREP = @GREP@
211INSTALL = @INSTALL@
212INSTALL_CMD = @INSTALL_CMD@
213INSTALL_DATA = @INSTALL_DATA@
214INSTALL_PROGRAM = @INSTALL_PROGRAM@
215INSTALL_SCRIPT = @INSTALL_SCRIPT@
216INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
217LDFLAGS = @LDFLAGS@
218LIBICONV = @LIBICONV@
219LIBOBJS = @LIBOBJS@
220LIBS = @LIBS@
221LIB_MAN_DIR = @LIB_MAN_DIR@
222LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
223LTLIBICONV = @LTLIBICONV@
224LTLIBOBJS = @LTLIBOBJS@
225MAINT = @MAINT@
226MAKEINFO = @MAKEINFO@
227MAN_SUBSTS = @MAN_SUBSTS@
228MISC_MAN_DIR = @MISC_MAN_DIR@
229MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
230MKDIR_P = @MKDIR_P@
231OBJEXT = @OBJEXT@
232PACKAGE = @PACKAGE@
233PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
234PACKAGE_NAME = @PACKAGE_NAME@
235PACKAGE_STRING = @PACKAGE_STRING@
236PACKAGE_TARNAME = @PACKAGE_TARNAME@
237PACKAGE_URL = @PACKAGE_URL@
238PACKAGE_VERSION = @PACKAGE_VERSION@
239PATH_SEPARATOR = @PATH_SEPARATOR@
240PKG_CONFIG = @PKG_CONFIG@
241SED = @SED@
242SET_MAKE = @SET_MAKE@
243SHELL = @SHELL@
244STRICT_CFLAGS = @STRICT_CFLAGS@
245STRIP = @STRIP@
246VERSION = @VERSION@
247XCLOCK_CFLAGS = @XCLOCK_CFLAGS@
248XCLOCK_LIBS = @XCLOCK_LIBS@
249XFT_CFLAGS = @XFT_CFLAGS@
250XFT_LIBS = @XFT_LIBS@
251XKB_CFLAGS = @XKB_CFLAGS@
252XKB_LIBS = @XKB_LIBS@
253XORG_MAN_PAGE = @XORG_MAN_PAGE@
254abs_builddir = @abs_builddir@
255abs_srcdir = @abs_srcdir@
256abs_top_builddir = @abs_top_builddir@
257abs_top_srcdir = @abs_top_srcdir@
258ac_ct_CC = @ac_ct_CC@
259am__include = @am__include@
260am__leading_dot = @am__leading_dot@
261am__quote = @am__quote@
262am__tar = @am__tar@
263am__untar = @am__untar@
264appdefaultdir = @appdefaultdir@
265bindir = @bindir@
266build = @build@
267build_alias = @build_alias@
268build_cpu = @build_cpu@
269build_os = @build_os@
270build_vendor = @build_vendor@
271builddir = @builddir@
272datadir = @datadir@
273datarootdir = @datarootdir@
274docdir = @docdir@
275dvidir = @dvidir@
276exec_prefix = @exec_prefix@
277host = @host@
278host_alias = @host_alias@
279host_cpu = @host_cpu@
280host_os = @host_os@
281host_vendor = @host_vendor@
282htmldir = @htmldir@
283includedir = @includedir@
284infodir = @infodir@
285install_sh = @install_sh@
286libdir = @libdir@
287libexecdir = @libexecdir@
288localedir = @localedir@
289localstatedir = @localstatedir@
290mandir = @mandir@
291mkdir_p = @mkdir_p@
292oldincludedir = @oldincludedir@
293pdfdir = @pdfdir@
294prefix = @prefix@
295program_transform_name = @program_transform_name@
296psdir = @psdir@
297sbindir = @sbindir@
298sharedstatedir = @sharedstatedir@
299srcdir = @srcdir@
300sysconfdir = @sysconfdir@
301target_alias = @target_alias@
302top_build_prefix = @top_build_prefix@
303top_builddir = @top_builddir@
304top_srcdir = @top_srcdir@
305SUBDIRS = man
306AM_CFLAGS = $(CWARNFLAGS) $(XCLOCK_CFLAGS)
307xclock_LDADD = $(XCLOCK_LIBS)
308xclock_SOURCES = \
309        Clock.c \
310        Clock.h \
311        ClockP.h \
312        xclock.c
313
314
315# App default files  (*.ad)
316DISTCHECK_CONFIGURE_FLAGS = --with-appdefaultdir=\$${datadir}/X11/app-defaults
317dist_appdefault_DATA = \
318        app-defaults/XClock-color \
319        app-defaults/XClock
320
321EXTRA_DIST = \
322	clmask.bit \
323	clock.bit
324
325CLEANFILES = $(APPDEFAULTFILES)
326MAINTAINERCLEANFILES = ChangeLog INSTALL
327all: config.h
328	$(MAKE) $(AM_MAKEFLAGS) all-recursive
329
330.SUFFIXES:
331.SUFFIXES: .c .o .obj
332am--refresh:
333	@:
334$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
335	@for dep in $?; do \
336	  case '$(am__configure_deps)' in \
337	    *$$dep*) \
338	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
339	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
340		&& exit 0; \
341	      exit 1;; \
342	  esac; \
343	done; \
344	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
345	$(am__cd) $(top_srcdir) && \
346	  $(AUTOMAKE) --foreign Makefile
347.PRECIOUS: Makefile
348Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
349	@case '$?' in \
350	  *config.status*) \
351	    echo ' $(SHELL) ./config.status'; \
352	    $(SHELL) ./config.status;; \
353	  *) \
354	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
355	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
356	esac;
357
358$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
359	$(SHELL) ./config.status --recheck
360
361$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
362	$(am__cd) $(srcdir) && $(AUTOCONF)
363$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
364	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
365$(am__aclocal_m4_deps):
366
367config.h: stamp-h1
368	@if test ! -f $@; then \
369	  rm -f stamp-h1; \
370	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
371	else :; fi
372
373stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
374	@rm -f stamp-h1
375	cd $(top_builddir) && $(SHELL) ./config.status config.h
376$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
377	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
378	rm -f stamp-h1
379	touch $@
380
381distclean-hdr:
382	-rm -f config.h stamp-h1
383install-binPROGRAMS: $(bin_PROGRAMS)
384	@$(NORMAL_INSTALL)
385	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
386	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
387	for p in $$list; do echo "$$p $$p"; done | \
388	sed 's/$(EXEEXT)$$//' | \
389	while read p p1; do if test -f $$p; \
390	  then echo "$$p"; echo "$$p"; else :; fi; \
391	done | \
392	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
393	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
394	sed 'N;N;N;s,\n, ,g' | \
395	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
396	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
397	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
398	    else { print "f", $$3 "/" $$4, $$1; } } \
399	  END { for (d in files) print "f", d, files[d] }' | \
400	while read type dir files; do \
401	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
402	    test -z "$$files" || { \
403	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
404	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
405	    } \
406	; done
407
408uninstall-binPROGRAMS:
409	@$(NORMAL_UNINSTALL)
410	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
411	files=`for p in $$list; do echo "$$p"; done | \
412	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
413	      -e 's/$$/$(EXEEXT)/' `; \
414	test -n "$$list" || exit 0; \
415	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
416	cd "$(DESTDIR)$(bindir)" && rm -f $$files
417
418clean-binPROGRAMS:
419	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
420xclock$(EXEEXT): $(xclock_OBJECTS) $(xclock_DEPENDENCIES) 
421	@rm -f xclock$(EXEEXT)
422	$(AM_V_CCLD)$(LINK) $(xclock_OBJECTS) $(xclock_LDADD) $(LIBS)
423
424mostlyclean-compile:
425	-rm -f *.$(OBJEXT)
426
427distclean-compile:
428	-rm -f *.tab.c
429
430@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Clock.Po@am__quote@
431@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xclock.Po@am__quote@
432
433.c.o:
434@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
435@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
436@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
437@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
438@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
439@am__fastdepCC_FALSE@	$(COMPILE) -c $<
440
441.c.obj:
442@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
443@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
444@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
445@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
446@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
447@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
448install-dist_appdefaultDATA: $(dist_appdefault_DATA)
449	@$(NORMAL_INSTALL)
450	test -z "$(appdefaultdir)" || $(MKDIR_P) "$(DESTDIR)$(appdefaultdir)"
451	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
452	for p in $$list; do \
453	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
454	  echo "$$d$$p"; \
455	done | $(am__base_list) | \
456	while read files; do \
457	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appdefaultdir)'"; \
458	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appdefaultdir)" || exit $$?; \
459	done
460
461uninstall-dist_appdefaultDATA:
462	@$(NORMAL_UNINSTALL)
463	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
464	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
465	test -n "$$files" || exit 0; \
466	echo " ( cd '$(DESTDIR)$(appdefaultdir)' && rm -f" $$files ")"; \
467	cd "$(DESTDIR)$(appdefaultdir)" && rm -f $$files
468
469# This directory's subdirectories are mostly independent; you can cd
470# into them and run `make' without going through this Makefile.
471# To change the values of `make' variables: instead of editing Makefiles,
472# (1) if the variable is set in `config.status', edit `config.status'
473#     (which will cause the Makefiles to be regenerated when you run `make');
474# (2) otherwise, pass the desired values on the `make' command line.
475$(RECURSIVE_TARGETS):
476	@fail= failcom='exit 1'; \
477	for f in x $$MAKEFLAGS; do \
478	  case $$f in \
479	    *=* | --[!k]*);; \
480	    *k*) failcom='fail=yes';; \
481	  esac; \
482	done; \
483	dot_seen=no; \
484	target=`echo $@ | sed s/-recursive//`; \
485	list='$(SUBDIRS)'; for subdir in $$list; do \
486	  echo "Making $$target in $$subdir"; \
487	  if test "$$subdir" = "."; then \
488	    dot_seen=yes; \
489	    local_target="$$target-am"; \
490	  else \
491	    local_target="$$target"; \
492	  fi; \
493	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
494	  || eval $$failcom; \
495	done; \
496	if test "$$dot_seen" = "no"; then \
497	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
498	fi; test -z "$$fail"
499
500$(RECURSIVE_CLEAN_TARGETS):
501	@fail= failcom='exit 1'; \
502	for f in x $$MAKEFLAGS; do \
503	  case $$f in \
504	    *=* | --[!k]*);; \
505	    *k*) failcom='fail=yes';; \
506	  esac; \
507	done; \
508	dot_seen=no; \
509	case "$@" in \
510	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
511	  *) list='$(SUBDIRS)' ;; \
512	esac; \
513	rev=''; for subdir in $$list; do \
514	  if test "$$subdir" = "."; then :; else \
515	    rev="$$subdir $$rev"; \
516	  fi; \
517	done; \
518	rev="$$rev ."; \
519	target=`echo $@ | sed s/-recursive//`; \
520	for subdir in $$rev; do \
521	  echo "Making $$target in $$subdir"; \
522	  if test "$$subdir" = "."; then \
523	    local_target="$$target-am"; \
524	  else \
525	    local_target="$$target"; \
526	  fi; \
527	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
528	  || eval $$failcom; \
529	done && test -z "$$fail"
530tags-recursive:
531	list='$(SUBDIRS)'; for subdir in $$list; do \
532	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
533	done
534ctags-recursive:
535	list='$(SUBDIRS)'; for subdir in $$list; do \
536	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
537	done
538
539ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
540	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
541	unique=`for i in $$list; do \
542	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
543	  done | \
544	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
545	      END { if (nonempty) { for (i in files) print i; }; }'`; \
546	mkid -fID $$unique
547tags: TAGS
548
549TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
550		$(TAGS_FILES) $(LISP)
551	set x; \
552	here=`pwd`; \
553	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
554	  include_option=--etags-include; \
555	  empty_fix=.; \
556	else \
557	  include_option=--include; \
558	  empty_fix=; \
559	fi; \
560	list='$(SUBDIRS)'; for subdir in $$list; do \
561	  if test "$$subdir" = .; then :; else \
562	    test ! -f $$subdir/TAGS || \
563	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
564	  fi; \
565	done; \
566	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
567	unique=`for i in $$list; do \
568	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
569	  done | \
570	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
571	      END { if (nonempty) { for (i in files) print i; }; }'`; \
572	shift; \
573	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
574	  test -n "$$unique" || unique=$$empty_fix; \
575	  if test $$# -gt 0; then \
576	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
577	      "$$@" $$unique; \
578	  else \
579	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
580	      $$unique; \
581	  fi; \
582	fi
583ctags: CTAGS
584CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
585		$(TAGS_FILES) $(LISP)
586	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
587	unique=`for i in $$list; do \
588	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
589	  done | \
590	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
591	      END { if (nonempty) { for (i in files) print i; }; }'`; \
592	test -z "$(CTAGS_ARGS)$$unique" \
593	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
594	     $$unique
595
596GTAGS:
597	here=`$(am__cd) $(top_builddir) && pwd` \
598	  && $(am__cd) $(top_srcdir) \
599	  && gtags -i $(GTAGS_ARGS) "$$here"
600
601distclean-tags:
602	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
603
604distdir: $(DISTFILES)
605	$(am__remove_distdir)
606	test -d "$(distdir)" || mkdir "$(distdir)"
607	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
608	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
609	list='$(DISTFILES)'; \
610	  dist_files=`for file in $$list; do echo $$file; done | \
611	  sed -e "s|^$$srcdirstrip/||;t" \
612	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
613	case $$dist_files in \
614	  */*) $(MKDIR_P) `echo "$$dist_files" | \
615			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
616			   sort -u` ;; \
617	esac; \
618	for file in $$dist_files; do \
619	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
620	  if test -d $$d/$$file; then \
621	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
622	    if test -d "$(distdir)/$$file"; then \
623	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
624	    fi; \
625	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
626	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
627	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
628	    fi; \
629	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
630	  else \
631	    test -f "$(distdir)/$$file" \
632	    || cp -p $$d/$$file "$(distdir)/$$file" \
633	    || exit 1; \
634	  fi; \
635	done
636	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
637	  if test "$$subdir" = .; then :; else \
638	    test -d "$(distdir)/$$subdir" \
639	    || $(MKDIR_P) "$(distdir)/$$subdir" \
640	    || exit 1; \
641	  fi; \
642	done
643	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
644	  if test "$$subdir" = .; then :; else \
645	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
646	    $(am__relativize); \
647	    new_distdir=$$reldir; \
648	    dir1=$$subdir; dir2="$(top_distdir)"; \
649	    $(am__relativize); \
650	    new_top_distdir=$$reldir; \
651	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
652	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
653	    ($(am__cd) $$subdir && \
654	      $(MAKE) $(AM_MAKEFLAGS) \
655	        top_distdir="$$new_top_distdir" \
656	        distdir="$$new_distdir" \
657		am__remove_distdir=: \
658		am__skip_length_check=: \
659		am__skip_mode_fix=: \
660	        distdir) \
661	      || exit 1; \
662	  fi; \
663	done
664	$(MAKE) $(AM_MAKEFLAGS) \
665	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
666	  dist-hook
667	-test -n "$(am__skip_mode_fix)" \
668	|| find "$(distdir)" -type d ! -perm -755 \
669		-exec chmod u+rwx,go+rx {} \; -o \
670	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
671	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
672	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
673	|| chmod -R a+r "$(distdir)"
674dist-gzip: distdir
675	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
676	$(am__remove_distdir)
677dist-bzip2: distdir
678	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
679	$(am__remove_distdir)
680
681dist-lzma: distdir
682	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
683	$(am__remove_distdir)
684
685dist-xz: distdir
686	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
687	$(am__remove_distdir)
688
689dist-tarZ: distdir
690	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
691	$(am__remove_distdir)
692
693dist-shar: distdir
694	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
695	$(am__remove_distdir)
696
697dist-zip: distdir
698	-rm -f $(distdir).zip
699	zip -rq $(distdir).zip $(distdir)
700	$(am__remove_distdir)
701
702dist dist-all: distdir
703	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
704	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
705	$(am__remove_distdir)
706
707# This target untars the dist file and tries a VPATH configuration.  Then
708# it guarantees that the distribution is self-contained by making another
709# tarfile.
710distcheck: dist
711	case '$(DIST_ARCHIVES)' in \
712	*.tar.gz*) \
713	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
714	*.tar.bz2*) \
715	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
716	*.tar.lzma*) \
717	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
718	*.tar.xz*) \
719	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
720	*.tar.Z*) \
721	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
722	*.shar.gz*) \
723	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
724	*.zip*) \
725	  unzip $(distdir).zip ;;\
726	esac
727	chmod -R a-w $(distdir); chmod a+w $(distdir)
728	mkdir $(distdir)/_build
729	mkdir $(distdir)/_inst
730	chmod a-w $(distdir)
731	test -d $(distdir)/_build || exit 0; \
732	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
733	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
734	  && am__cwd=`pwd` \
735	  && $(am__cd) $(distdir)/_build \
736	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
737	    $(DISTCHECK_CONFIGURE_FLAGS) \
738	  && $(MAKE) $(AM_MAKEFLAGS) \
739	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
740	  && $(MAKE) $(AM_MAKEFLAGS) check \
741	  && $(MAKE) $(AM_MAKEFLAGS) install \
742	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
743	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
744	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
745	        distuninstallcheck \
746	  && chmod -R a-w "$$dc_install_base" \
747	  && ({ \
748	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
749	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
750	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
751	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
752	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
753	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
754	  && rm -rf "$$dc_destdir" \
755	  && $(MAKE) $(AM_MAKEFLAGS) dist \
756	  && rm -rf $(DIST_ARCHIVES) \
757	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
758	  && cd "$$am__cwd" \
759	  || exit 1
760	$(am__remove_distdir)
761	@(echo "$(distdir) archives ready for distribution: "; \
762	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
763	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
764distuninstallcheck:
765	@$(am__cd) '$(distuninstallcheck_dir)' \
766	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
767	   || { echo "ERROR: files left after uninstall:" ; \
768	        if test -n "$(DESTDIR)"; then \
769	          echo "  (check DESTDIR support)"; \
770	        fi ; \
771	        $(distuninstallcheck_listfiles) ; \
772	        exit 1; } >&2
773distcleancheck: distclean
774	@if test '$(srcdir)' = . ; then \
775	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
776	  exit 1 ; \
777	fi
778	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
779	  || { echo "ERROR: files left in build directory after distclean:" ; \
780	       $(distcleancheck_listfiles) ; \
781	       exit 1; } >&2
782check-am: all-am
783check: check-recursive
784all-am: Makefile $(PROGRAMS) $(DATA) config.h
785installdirs: installdirs-recursive
786installdirs-am:
787	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)"; do \
788	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
789	done
790install: install-recursive
791install-exec: install-exec-recursive
792install-data: install-data-recursive
793uninstall: uninstall-recursive
794
795install-am: all-am
796	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
797
798installcheck: installcheck-recursive
799install-strip:
800	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
801	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
802	  `test -z '$(STRIP)' || \
803	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
804mostlyclean-generic:
805
806clean-generic:
807	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
808
809distclean-generic:
810	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
811	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
812
813maintainer-clean-generic:
814	@echo "This command is intended for maintainers to use"
815	@echo "it deletes files that may require special tools to rebuild."
816	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
817clean: clean-recursive
818
819clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
820
821distclean: distclean-recursive
822	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
823	-rm -rf ./$(DEPDIR)
824	-rm -f Makefile
825distclean-am: clean-am distclean-compile distclean-generic \
826	distclean-hdr distclean-tags
827
828dvi: dvi-recursive
829
830dvi-am:
831
832html: html-recursive
833
834html-am:
835
836info: info-recursive
837
838info-am:
839
840install-data-am: install-dist_appdefaultDATA
841
842install-dvi: install-dvi-recursive
843
844install-dvi-am:
845
846install-exec-am: install-binPROGRAMS
847
848install-html: install-html-recursive
849
850install-html-am:
851
852install-info: install-info-recursive
853
854install-info-am:
855
856install-man:
857
858install-pdf: install-pdf-recursive
859
860install-pdf-am:
861
862install-ps: install-ps-recursive
863
864install-ps-am:
865
866installcheck-am:
867
868maintainer-clean: maintainer-clean-recursive
869	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
870	-rm -rf $(top_srcdir)/autom4te.cache
871	-rm -rf ./$(DEPDIR)
872	-rm -f Makefile
873maintainer-clean-am: distclean-am maintainer-clean-generic
874
875mostlyclean: mostlyclean-recursive
876
877mostlyclean-am: mostlyclean-compile mostlyclean-generic
878
879pdf: pdf-recursive
880
881pdf-am:
882
883ps: ps-recursive
884
885ps-am:
886
887uninstall-am: uninstall-binPROGRAMS uninstall-dist_appdefaultDATA
888
889.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
890	ctags-recursive install-am install-strip tags-recursive
891
892.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
893	all all-am am--refresh check check-am clean clean-binPROGRAMS \
894	clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \
895	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
896	dist-zip distcheck distclean distclean-compile \
897	distclean-generic distclean-hdr distclean-tags distcleancheck \
898	distdir distuninstallcheck dvi dvi-am html html-am info \
899	info-am install install-am install-binPROGRAMS install-data \
900	install-data-am install-dist_appdefaultDATA install-dvi \
901	install-dvi-am install-exec install-exec-am install-html \
902	install-html-am install-info install-info-am install-man \
903	install-pdf install-pdf-am install-ps install-ps-am \
904	install-strip installcheck installcheck-am installdirs \
905	installdirs-am maintainer-clean maintainer-clean-generic \
906	mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
907	ps ps-am tags tags-recursive uninstall uninstall-am \
908	uninstall-binPROGRAMS uninstall-dist_appdefaultDATA
909
910
911.PHONY: ChangeLog INSTALL
912
913INSTALL:
914	$(INSTALL_CMD)
915
916ChangeLog:
917	$(CHANGELOG_CMD)
918
919dist-hook: ChangeLog INSTALL
920
921# Tell versions [3.59,3.63) of GNU make to not export all variables.
922# Otherwise a system limit (for SysV at least) may be exceeded.
923.NOEXPORT:
924