Makefile.in revision 00994698 
1# Makefile.in generated by automake 1.16.5 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2021 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# 
18#  Copyright 2005  Red Hat, Inc.
19# 
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Red Hat not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Red Hat makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29# 
30#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38
39VPATH = @srcdir@
40am__is_gnu_make = { \
41  if test -z '$(MAKELEVEL)'; then \
42    false; \
43  elif test -n '$(MAKE_HOST)'; then \
44    true; \
45  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
46    true; \
47  else \
48    false; \
49  fi; \
50}
51am__make_running_with_option = \
52  case $${target_option-} in \
53      ?) ;; \
54      *) echo "am__make_running_with_option: internal error: invalid" \
55              "target option '$${target_option-}' specified" >&2; \
56         exit 1;; \
57  esac; \
58  has_opt=no; \
59  sane_makeflags=$$MAKEFLAGS; \
60  if $(am__is_gnu_make); then \
61    sane_makeflags=$$MFLAGS; \
62  else \
63    case $$MAKEFLAGS in \
64      *\\[\ \	]*) \
65        bs=\\; \
66        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
67          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
68    esac; \
69  fi; \
70  skip_next=no; \
71  strip_trailopt () \
72  { \
73    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
74  }; \
75  for flg in $$sane_makeflags; do \
76    test $$skip_next = yes && { skip_next=no; continue; }; \
77    case $$flg in \
78      *=*|--*) continue;; \
79        -*I) strip_trailopt 'I'; skip_next=yes;; \
80      -*I?*) strip_trailopt 'I';; \
81        -*O) strip_trailopt 'O'; skip_next=yes;; \
82      -*O?*) strip_trailopt 'O';; \
83        -*l) strip_trailopt 'l'; skip_next=yes;; \
84      -*l?*) strip_trailopt 'l';; \
85      -[dEDm]) skip_next=yes;; \
86      -[JT]) skip_next=yes;; \
87    esac; \
88    case $$flg in \
89      *$$target_option*) has_opt=yes; break;; \
90    esac; \
91  done; \
92  test $$has_opt = yes
93am__make_dryrun = (target_option=n; $(am__make_running_with_option))
94am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
95pkgdatadir = $(datadir)/@PACKAGE@
96pkgincludedir = $(includedir)/@PACKAGE@
97pkglibdir = $(libdir)/@PACKAGE@
98pkglibexecdir = $(libexecdir)/@PACKAGE@
99am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
100install_sh_DATA = $(install_sh) -c -m 644
101install_sh_PROGRAM = $(install_sh) -c
102install_sh_SCRIPT = $(install_sh) -c
103INSTALL_HEADER = $(INSTALL_DATA)
104transform = $(program_transform_name)
105NORMAL_INSTALL = :
106PRE_INSTALL = :
107POST_INSTALL = :
108NORMAL_UNINSTALL = :
109PRE_UNINSTALL = :
110POST_UNINSTALL = :
111build_triplet = @build@
112host_triplet = @host@
113bin_PROGRAMS = xditview$(EXEEXT)
114subdir = .
115ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
116am__aclocal_m4_deps = $(top_srcdir)/configure.ac
117am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
118	$(ACLOCAL_M4)
119DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
120	$(am__configure_deps) $(dist_appdefault_DATA) \
121	$(dist_bitmap_DATA) $(am__DIST_COMMON)
122am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
123 configure.lineno config.status.lineno
124mkinstalldirs = $(install_sh) -d
125CONFIG_HEADER = config.h
126CONFIG_CLEAN_FILES =
127CONFIG_CLEAN_VPATH_FILES =
128am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)" \
129	"$(DESTDIR)$(bitmapdir)"
130PROGRAMS = $(bin_PROGRAMS)
131am_xditview_OBJECTS = draw.$(OBJEXT) Dvi.$(OBJEXT) DviChar.$(OBJEXT) \
132	font.$(OBJEXT) lex.$(OBJEXT) page.$(OBJEXT) parse.$(OBJEXT) \
133	xditview.$(OBJEXT) XFontName.$(OBJEXT)
134xditview_OBJECTS = $(am_xditview_OBJECTS)
135am__DEPENDENCIES_1 =
136xditview_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
137AM_V_P = $(am__v_P_@AM_V@)
138am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
139am__v_P_0 = false
140am__v_P_1 = :
141AM_V_GEN = $(am__v_GEN_@AM_V@)
142am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
143am__v_GEN_0 = @echo "  GEN     " $@;
144am__v_GEN_1 = 
145AM_V_at = $(am__v_at_@AM_V@)
146am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
147am__v_at_0 = @
148am__v_at_1 = 
149DEFAULT_INCLUDES = -I.@am__isrc@
150depcomp = $(SHELL) $(top_srcdir)/depcomp
151am__maybe_remake_depfiles = depfiles
152am__depfiles_remade = ./$(DEPDIR)/Dvi.Po ./$(DEPDIR)/DviChar.Po \
153	./$(DEPDIR)/XFontName.Po ./$(DEPDIR)/draw.Po \
154	./$(DEPDIR)/font.Po ./$(DEPDIR)/lex.Po ./$(DEPDIR)/page.Po \
155	./$(DEPDIR)/parse.Po ./$(DEPDIR)/xditview.Po
156am__mv = mv -f
157COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
158	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
159AM_V_CC = $(am__v_CC_@AM_V@)
160am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
161am__v_CC_0 = @echo "  CC      " $@;
162am__v_CC_1 = 
163CCLD = $(CC)
164LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
165AM_V_CCLD = $(am__v_CCLD_@AM_V@)
166am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
167am__v_CCLD_0 = @echo "  CCLD    " $@;
168am__v_CCLD_1 = 
169SOURCES = $(xditview_SOURCES)
170DIST_SOURCES = $(xditview_SOURCES)
171RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
172	ctags-recursive dvi-recursive html-recursive info-recursive \
173	install-data-recursive install-dvi-recursive \
174	install-exec-recursive install-html-recursive \
175	install-info-recursive install-pdf-recursive \
176	install-ps-recursive install-recursive installcheck-recursive \
177	installdirs-recursive pdf-recursive ps-recursive \
178	tags-recursive uninstall-recursive
179am__can_run_installinfo = \
180  case $$AM_UPDATE_INFO_DIR in \
181    n|no|NO) false;; \
182    *) (install-info --version) >/dev/null 2>&1;; \
183  esac
184am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
185am__vpath_adj = case $$p in \
186    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
187    *) f=$$p;; \
188  esac;
189am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
190am__install_max = 40
191am__nobase_strip_setup = \
192  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
193am__nobase_strip = \
194  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
195am__nobase_list = $(am__nobase_strip_setup); \
196  for p in $$list; do echo "$$p $$p"; done | \
197  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
198  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
199    if (++n[$$2] == $(am__install_max)) \
200      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
201    END { for (dir in files) print dir, files[dir] }'
202am__base_list = \
203  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
204  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
205am__uninstall_files_from_dir = { \
206  test -z "$$files" \
207    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
208    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
209         $(am__cd) "$$dir" && rm -f $$files; }; \
210  }
211DATA = $(dist_appdefault_DATA) $(dist_bitmap_DATA)
212RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
213  distclean-recursive maintainer-clean-recursive
214am__recursive_targets = \
215  $(RECURSIVE_TARGETS) \
216  $(RECURSIVE_CLEAN_TARGETS) \
217  $(am__extra_recursive_targets)
218AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
219	cscope distdir distdir-am dist dist-all distcheck
220am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
221	config.h.in
222# Read a list of newline-separated strings from the standard input,
223# and print each of them once, without duplicates.  Input order is
224# *not* preserved.
225am__uniquify_input = $(AWK) '\
226  BEGIN { nonempty = 0; } \
227  { items[$$0] = 1; nonempty = 1; } \
228  END { if (nonempty) { for (i in items) print i; }; } \
229'
230# Make sure the list of sources is unique.  This is necessary because,
231# e.g., the same source file might be shared among _SOURCES variables
232# for different programs/libraries.
233am__define_uniq_tagged_files = \
234  list='$(am__tagged_files)'; \
235  unique=`for i in $$list; do \
236    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
237  done | $(am__uniquify_input)`
238DIST_SUBDIRS = $(SUBDIRS)
239am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \
240	ChangeLog INSTALL README.md compile config.guess config.sub \
241	depcomp install-sh missing
242DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
243distdir = $(PACKAGE)-$(VERSION)
244top_distdir = $(distdir)
245am__remove_distdir = \
246  if test -d "$(distdir)"; then \
247    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
248      && rm -rf "$(distdir)" \
249      || { sleep 5 && rm -rf "$(distdir)"; }; \
250  else :; fi
251am__post_remove_distdir = $(am__remove_distdir)
252am__relativize = \
253  dir0=`pwd`; \
254  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
255  sed_rest='s,^[^/]*/*,,'; \
256  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
257  sed_butlast='s,/*[^/]*$$,,'; \
258  while test -n "$$dir1"; do \
259    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
260    if test "$$first" != "."; then \
261      if test "$$first" = ".."; then \
262        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
263        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
264      else \
265        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
266        if test "$$first2" = "$$first"; then \
267          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
268        else \
269          dir2="../$$dir2"; \
270        fi; \
271        dir0="$$dir0"/"$$first"; \
272      fi; \
273    fi; \
274    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
275  done; \
276  reldir="$$dir2"
277DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
278GZIP_ENV = --best
279DIST_TARGETS = dist-xz dist-gzip
280# Exists only to be overridden by the user if desired.
281AM_DISTCHECK_DVI_TARGET = dvi
282distuninstallcheck_listfiles = find . -type f -print
283am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
284  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
285distcleancheck_listfiles = find . -type f -print
286ACLOCAL = @ACLOCAL@
287ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
288ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
289AMTAR = @AMTAR@
290AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
291APPDEFS_CFLAGS = @APPDEFS_CFLAGS@
292APPDEFS_LIBS = @APPDEFS_LIBS@
293APP_MAN_DIR = @APP_MAN_DIR@
294APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
295AUTOCONF = @AUTOCONF@
296AUTOHEADER = @AUTOHEADER@
297AUTOMAKE = @AUTOMAKE@
298AWK = @AWK@
299BASE_CFLAGS = @BASE_CFLAGS@
300CC = @CC@
301CCDEPMODE = @CCDEPMODE@
302CFLAGS = @CFLAGS@
303CHANGELOG_CMD = @CHANGELOG_CMD@
304CPPFLAGS = @CPPFLAGS@
305CSCOPE = @CSCOPE@
306CTAGS = @CTAGS@
307CWARNFLAGS = @CWARNFLAGS@
308CYGPATH_W = @CYGPATH_W@
309DEFS = @DEFS@
310DEPDIR = @DEPDIR@
311DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
312DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
313ECHO_C = @ECHO_C@
314ECHO_N = @ECHO_N@
315ECHO_T = @ECHO_T@
316ETAGS = @ETAGS@
317EXEEXT = @EXEEXT@
318FILE_MAN_DIR = @FILE_MAN_DIR@
319FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
320INSTALL = @INSTALL@
321INSTALL_CMD = @INSTALL_CMD@
322INSTALL_DATA = @INSTALL_DATA@
323INSTALL_PROGRAM = @INSTALL_PROGRAM@
324INSTALL_SCRIPT = @INSTALL_SCRIPT@
325INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
326LDFLAGS = @LDFLAGS@
327LIBOBJS = @LIBOBJS@
328LIBS = @LIBS@
329LIB_MAN_DIR = @LIB_MAN_DIR@
330LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
331LTLIBOBJS = @LTLIBOBJS@
332MAKEINFO = @MAKEINFO@
333MAN_SUBSTS = @MAN_SUBSTS@
334MISC_MAN_DIR = @MISC_MAN_DIR@
335MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
336MKDIR_P = @MKDIR_P@
337OBJEXT = @OBJEXT@
338PACKAGE = @PACKAGE@
339PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
340PACKAGE_NAME = @PACKAGE_NAME@
341PACKAGE_STRING = @PACKAGE_STRING@
342PACKAGE_TARNAME = @PACKAGE_TARNAME@
343PACKAGE_URL = @PACKAGE_URL@
344PACKAGE_VERSION = @PACKAGE_VERSION@
345PATH_SEPARATOR = @PATH_SEPARATOR@
346PKG_CONFIG = @PKG_CONFIG@
347PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
348PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
349SED = @SED@
350SET_MAKE = @SET_MAKE@
351SHELL = @SHELL@
352STRICT_CFLAGS = @STRICT_CFLAGS@
353STRIP = @STRIP@
354VERSION = @VERSION@
355XDITVIEW_CFLAGS = @XDITVIEW_CFLAGS@
356XDITVIEW_LIBS = @XDITVIEW_LIBS@
357XFT_CFLAGS = @XFT_CFLAGS@
358XFT_LIBS = @XFT_LIBS@
359XORG_MAN_PAGE = @XORG_MAN_PAGE@
360abs_builddir = @abs_builddir@
361abs_srcdir = @abs_srcdir@
362abs_top_builddir = @abs_top_builddir@
363abs_top_srcdir = @abs_top_srcdir@
364ac_ct_CC = @ac_ct_CC@
365am__include = @am__include@
366am__leading_dot = @am__leading_dot@
367am__quote = @am__quote@
368am__tar = @am__tar@
369am__untar = @am__untar@
370appdefaultdir = @appdefaultdir@
371bindir = @bindir@
372build = @build@
373build_alias = @build_alias@
374build_cpu = @build_cpu@
375build_os = @build_os@
376build_vendor = @build_vendor@
377builddir = @builddir@
378datadir = @datadir@
379datarootdir = @datarootdir@
380docdir = @docdir@
381dvidir = @dvidir@
382exec_prefix = @exec_prefix@
383host = @host@
384host_alias = @host_alias@
385host_cpu = @host_cpu@
386host_os = @host_os@
387host_vendor = @host_vendor@
388htmldir = @htmldir@
389includedir = @includedir@
390infodir = @infodir@
391install_sh = @install_sh@
392libdir = @libdir@
393libexecdir = @libexecdir@
394localedir = @localedir@
395localstatedir = @localstatedir@
396mandir = @mandir@
397mkdir_p = @mkdir_p@
398oldincludedir = @oldincludedir@
399pdfdir = @pdfdir@
400prefix = @prefix@
401program_transform_name = @program_transform_name@
402psdir = @psdir@
403runstatedir = @runstatedir@
404sbindir = @sbindir@
405sharedstatedir = @sharedstatedir@
406srcdir = @srcdir@
407sysconfdir = @sysconfdir@
408target_alias = @target_alias@
409top_build_prefix = @top_build_prefix@
410top_builddir = @top_builddir@
411top_srcdir = @top_srcdir@
412SUBDIRS = man
413AM_CPPFLAGS = -D_CONST_X_STRING
414AM_CFLAGS = $(XDITVIEW_CFLAGS) $(XFT_CFLAGS) $(CWARNFLAGS)
415xditview_LDADD = $(XDITVIEW_LIBS) $(XFT_LIBS) -lm
416xditview_SOURCES = \
417        draw.c \
418        Dvi.c \
419        DviChar.c \
420        DviChar.h \
421        Dvi.h \
422        DviP.h \
423        font.c \
424        lex.c \
425        Menu.h \
426        page.c \
427        parse.c \
428        xditview.c \
429        XFontName.c \
430        XFontName.h
431
432
433# App default files
434DISTCHECK_CONFIGURE_FLAGS = --with-appdefaultdir=\$${datadir}/X11/app-defaults
435dist_appdefault_DATA = \
436        app-defaults/Xditview \
437        app-defaults/Xditview-chrtr
438
439
440# Bitmaps referenced at runtime
441bitmapdir = $(includedir)/X11/bitmaps
442dist_bitmap_DATA = ldblarrow rdblarrow
443EXTRA_DIST = xdit.bm xdit_mask.bm README.md
444MAINTAINERCLEANFILES = ChangeLog INSTALL
445all: config.h
446	$(MAKE) $(AM_MAKEFLAGS) all-recursive
447
448.SUFFIXES:
449.SUFFIXES: .c .o .obj
450am--refresh: Makefile
451	@:
452$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
453	@for dep in $?; do \
454	  case '$(am__configure_deps)' in \
455	    *$$dep*) \
456	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
457	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
458		&& exit 0; \
459	      exit 1;; \
460	  esac; \
461	done; \
462	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
463	$(am__cd) $(top_srcdir) && \
464	  $(AUTOMAKE) --foreign Makefile
465Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
466	@case '$?' in \
467	  *config.status*) \
468	    echo ' $(SHELL) ./config.status'; \
469	    $(SHELL) ./config.status;; \
470	  *) \
471	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
472	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
473	esac;
474
475$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
476	$(SHELL) ./config.status --recheck
477
478$(top_srcdir)/configure:  $(am__configure_deps)
479	$(am__cd) $(srcdir) && $(AUTOCONF)
480$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
481	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
482$(am__aclocal_m4_deps):
483
484config.h: stamp-h1
485	@test -f $@ || rm -f stamp-h1
486	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
487
488stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
489	@rm -f stamp-h1
490	cd $(top_builddir) && $(SHELL) ./config.status config.h
491$(srcdir)/config.h.in:  $(am__configure_deps) 
492	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
493	rm -f stamp-h1
494	touch $@
495
496distclean-hdr:
497	-rm -f config.h stamp-h1
498install-binPROGRAMS: $(bin_PROGRAMS)
499	@$(NORMAL_INSTALL)
500	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
501	if test -n "$$list"; then \
502	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
503	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
504	fi; \
505	for p in $$list; do echo "$$p $$p"; done | \
506	sed 's/$(EXEEXT)$$//' | \
507	while read p p1; do if test -f $$p \
508	  ; then echo "$$p"; echo "$$p"; else :; fi; \
509	done | \
510	sed -e 'p;s,.*/,,;n;h' \
511	    -e 's|.*|.|' \
512	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
513	sed 'N;N;N;s,\n, ,g' | \
514	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
515	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
516	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
517	    else { print "f", $$3 "/" $$4, $$1; } } \
518	  END { for (d in files) print "f", d, files[d] }' | \
519	while read type dir files; do \
520	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
521	    test -z "$$files" || { \
522	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
523	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
524	    } \
525	; done
526
527uninstall-binPROGRAMS:
528	@$(NORMAL_UNINSTALL)
529	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
530	files=`for p in $$list; do echo "$$p"; done | \
531	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
532	      -e 's/$$/$(EXEEXT)/' \
533	`; \
534	test -n "$$list" || exit 0; \
535	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
536	cd "$(DESTDIR)$(bindir)" && rm -f $$files
537
538clean-binPROGRAMS:
539	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
540
541xditview$(EXEEXT): $(xditview_OBJECTS) $(xditview_DEPENDENCIES) $(EXTRA_xditview_DEPENDENCIES) 
542	@rm -f xditview$(EXEEXT)
543	$(AM_V_CCLD)$(LINK) $(xditview_OBJECTS) $(xditview_LDADD) $(LIBS)
544
545mostlyclean-compile:
546	-rm -f *.$(OBJEXT)
547
548distclean-compile:
549	-rm -f *.tab.c
550
551@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Dvi.Po@am__quote@ # am--include-marker
552@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/DviChar.Po@am__quote@ # am--include-marker
553@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/XFontName.Po@am__quote@ # am--include-marker
554@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/draw.Po@am__quote@ # am--include-marker
555@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/font.Po@am__quote@ # am--include-marker
556@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lex.Po@am__quote@ # am--include-marker
557@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/page.Po@am__quote@ # am--include-marker
558@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parse.Po@am__quote@ # am--include-marker
559@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xditview.Po@am__quote@ # am--include-marker
560
561$(am__depfiles_remade):
562	@$(MKDIR_P) $(@D)
563	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
564
565am--depfiles: $(am__depfiles_remade)
566
567.c.o:
568@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
569@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
570@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
571@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
572@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
573
574.c.obj:
575@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
576@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
577@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
578@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
579@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
580install-dist_appdefaultDATA: $(dist_appdefault_DATA)
581	@$(NORMAL_INSTALL)
582	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
583	if test -n "$$list"; then \
584	  echo " $(MKDIR_P) '$(DESTDIR)$(appdefaultdir)'"; \
585	  $(MKDIR_P) "$(DESTDIR)$(appdefaultdir)" || exit 1; \
586	fi; \
587	for p in $$list; do \
588	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
589	  echo "$$d$$p"; \
590	done | $(am__base_list) | \
591	while read files; do \
592	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appdefaultdir)'"; \
593	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appdefaultdir)" || exit $$?; \
594	done
595
596uninstall-dist_appdefaultDATA:
597	@$(NORMAL_UNINSTALL)
598	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
599	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
600	dir='$(DESTDIR)$(appdefaultdir)'; $(am__uninstall_files_from_dir)
601install-dist_bitmapDATA: $(dist_bitmap_DATA)
602	@$(NORMAL_INSTALL)
603	@list='$(dist_bitmap_DATA)'; test -n "$(bitmapdir)" || list=; \
604	if test -n "$$list"; then \
605	  echo " $(MKDIR_P) '$(DESTDIR)$(bitmapdir)'"; \
606	  $(MKDIR_P) "$(DESTDIR)$(bitmapdir)" || exit 1; \
607	fi; \
608	for p in $$list; do \
609	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
610	  echo "$$d$$p"; \
611	done | $(am__base_list) | \
612	while read files; do \
613	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(bitmapdir)'"; \
614	  $(INSTALL_DATA) $$files "$(DESTDIR)$(bitmapdir)" || exit $$?; \
615	done
616
617uninstall-dist_bitmapDATA:
618	@$(NORMAL_UNINSTALL)
619	@list='$(dist_bitmap_DATA)'; test -n "$(bitmapdir)" || list=; \
620	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
621	dir='$(DESTDIR)$(bitmapdir)'; $(am__uninstall_files_from_dir)
622
623# This directory's subdirectories are mostly independent; you can cd
624# into them and run 'make' without going through this Makefile.
625# To change the values of 'make' variables: instead of editing Makefiles,
626# (1) if the variable is set in 'config.status', edit 'config.status'
627#     (which will cause the Makefiles to be regenerated when you run 'make');
628# (2) otherwise, pass the desired values on the 'make' command line.
629$(am__recursive_targets):
630	@fail=; \
631	if $(am__make_keepgoing); then \
632	  failcom='fail=yes'; \
633	else \
634	  failcom='exit 1'; \
635	fi; \
636	dot_seen=no; \
637	target=`echo $@ | sed s/-recursive//`; \
638	case "$@" in \
639	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
640	  *) list='$(SUBDIRS)' ;; \
641	esac; \
642	for subdir in $$list; do \
643	  echo "Making $$target in $$subdir"; \
644	  if test "$$subdir" = "."; then \
645	    dot_seen=yes; \
646	    local_target="$$target-am"; \
647	  else \
648	    local_target="$$target"; \
649	  fi; \
650	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
651	  || eval $$failcom; \
652	done; \
653	if test "$$dot_seen" = "no"; then \
654	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
655	fi; test -z "$$fail"
656
657ID: $(am__tagged_files)
658	$(am__define_uniq_tagged_files); mkid -fID $$unique
659tags: tags-recursive
660TAGS: tags
661
662tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
663	set x; \
664	here=`pwd`; \
665	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
666	  include_option=--etags-include; \
667	  empty_fix=.; \
668	else \
669	  include_option=--include; \
670	  empty_fix=; \
671	fi; \
672	list='$(SUBDIRS)'; for subdir in $$list; do \
673	  if test "$$subdir" = .; then :; else \
674	    test ! -f $$subdir/TAGS || \
675	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
676	  fi; \
677	done; \
678	$(am__define_uniq_tagged_files); \
679	shift; \
680	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
681	  test -n "$$unique" || unique=$$empty_fix; \
682	  if test $$# -gt 0; then \
683	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
684	      "$$@" $$unique; \
685	  else \
686	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
687	      $$unique; \
688	  fi; \
689	fi
690ctags: ctags-recursive
691
692CTAGS: ctags
693ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
694	$(am__define_uniq_tagged_files); \
695	test -z "$(CTAGS_ARGS)$$unique" \
696	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
697	     $$unique
698
699GTAGS:
700	here=`$(am__cd) $(top_builddir) && pwd` \
701	  && $(am__cd) $(top_srcdir) \
702	  && gtags -i $(GTAGS_ARGS) "$$here"
703cscope: cscope.files
704	test ! -s cscope.files \
705	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
706clean-cscope:
707	-rm -f cscope.files
708cscope.files: clean-cscope cscopelist
709cscopelist: cscopelist-recursive
710
711cscopelist-am: $(am__tagged_files)
712	list='$(am__tagged_files)'; \
713	case "$(srcdir)" in \
714	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
715	  *) sdir=$(subdir)/$(srcdir) ;; \
716	esac; \
717	for i in $$list; do \
718	  if test -f "$$i"; then \
719	    echo "$(subdir)/$$i"; \
720	  else \
721	    echo "$$sdir/$$i"; \
722	  fi; \
723	done >> $(top_builddir)/cscope.files
724
725distclean-tags:
726	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
727	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
728distdir: $(BUILT_SOURCES)
729	$(MAKE) $(AM_MAKEFLAGS) distdir-am
730
731distdir-am: $(DISTFILES)
732	$(am__remove_distdir)
733	test -d "$(distdir)" || mkdir "$(distdir)"
734	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
735	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
736	list='$(DISTFILES)'; \
737	  dist_files=`for file in $$list; do echo $$file; done | \
738	  sed -e "s|^$$srcdirstrip/||;t" \
739	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
740	case $$dist_files in \
741	  */*) $(MKDIR_P) `echo "$$dist_files" | \
742			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
743			   sort -u` ;; \
744	esac; \
745	for file in $$dist_files; do \
746	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
747	  if test -d $$d/$$file; then \
748	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
749	    if test -d "$(distdir)/$$file"; then \
750	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
751	    fi; \
752	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
753	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
754	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
755	    fi; \
756	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
757	  else \
758	    test -f "$(distdir)/$$file" \
759	    || cp -p $$d/$$file "$(distdir)/$$file" \
760	    || exit 1; \
761	  fi; \
762	done
763	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
764	  if test "$$subdir" = .; then :; else \
765	    $(am__make_dryrun) \
766	      || test -d "$(distdir)/$$subdir" \
767	      || $(MKDIR_P) "$(distdir)/$$subdir" \
768	      || exit 1; \
769	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
770	    $(am__relativize); \
771	    new_distdir=$$reldir; \
772	    dir1=$$subdir; dir2="$(top_distdir)"; \
773	    $(am__relativize); \
774	    new_top_distdir=$$reldir; \
775	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
776	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
777	    ($(am__cd) $$subdir && \
778	      $(MAKE) $(AM_MAKEFLAGS) \
779	        top_distdir="$$new_top_distdir" \
780	        distdir="$$new_distdir" \
781		am__remove_distdir=: \
782		am__skip_length_check=: \
783		am__skip_mode_fix=: \
784	        distdir) \
785	      || exit 1; \
786	  fi; \
787	done
788	$(MAKE) $(AM_MAKEFLAGS) \
789	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
790	  dist-hook
791	-test -n "$(am__skip_mode_fix)" \
792	|| find "$(distdir)" -type d ! -perm -755 \
793		-exec chmod u+rwx,go+rx {} \; -o \
794	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
795	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
796	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
797	|| chmod -R a+r "$(distdir)"
798dist-gzip: distdir
799	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
800	$(am__post_remove_distdir)
801
802dist-bzip2: distdir
803	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
804	$(am__post_remove_distdir)
805
806dist-lzip: distdir
807	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
808	$(am__post_remove_distdir)
809dist-xz: distdir
810	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
811	$(am__post_remove_distdir)
812
813dist-zstd: distdir
814	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
815	$(am__post_remove_distdir)
816
817dist-tarZ: distdir
818	@echo WARNING: "Support for distribution archives compressed with" \
819		       "legacy program 'compress' is deprecated." >&2
820	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
821	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
822	$(am__post_remove_distdir)
823
824dist-shar: distdir
825	@echo WARNING: "Support for shar distribution archives is" \
826	               "deprecated." >&2
827	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
828	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
829	$(am__post_remove_distdir)
830
831dist-zip: distdir
832	-rm -f $(distdir).zip
833	zip -rq $(distdir).zip $(distdir)
834	$(am__post_remove_distdir)
835
836dist dist-all:
837	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
838	$(am__post_remove_distdir)
839
840# This target untars the dist file and tries a VPATH configuration.  Then
841# it guarantees that the distribution is self-contained by making another
842# tarfile.
843distcheck: dist
844	case '$(DIST_ARCHIVES)' in \
845	*.tar.gz*) \
846	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
847	*.tar.bz2*) \
848	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
849	*.tar.lz*) \
850	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
851	*.tar.xz*) \
852	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
853	*.tar.Z*) \
854	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
855	*.shar.gz*) \
856	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
857	*.zip*) \
858	  unzip $(distdir).zip ;;\
859	*.tar.zst*) \
860	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
861	esac
862	chmod -R a-w $(distdir)
863	chmod u+w $(distdir)
864	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
865	chmod a-w $(distdir)
866	test -d $(distdir)/_build || exit 0; \
867	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
868	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
869	  && am__cwd=`pwd` \
870	  && $(am__cd) $(distdir)/_build/sub \
871	  && ../../configure \
872	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
873	    $(DISTCHECK_CONFIGURE_FLAGS) \
874	    --srcdir=../.. --prefix="$$dc_install_base" \
875	  && $(MAKE) $(AM_MAKEFLAGS) \
876	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
877	  && $(MAKE) $(AM_MAKEFLAGS) check \
878	  && $(MAKE) $(AM_MAKEFLAGS) install \
879	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
880	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
881	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
882	        distuninstallcheck \
883	  && chmod -R a-w "$$dc_install_base" \
884	  && ({ \
885	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
886	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
887	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
888	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
889	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
890	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
891	  && rm -rf "$$dc_destdir" \
892	  && $(MAKE) $(AM_MAKEFLAGS) dist \
893	  && rm -rf $(DIST_ARCHIVES) \
894	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
895	  && cd "$$am__cwd" \
896	  || exit 1
897	$(am__post_remove_distdir)
898	@(echo "$(distdir) archives ready for distribution: "; \
899	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
900	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
901distuninstallcheck:
902	@test -n '$(distuninstallcheck_dir)' || { \
903	  echo 'ERROR: trying to run $@ with an empty' \
904	       '$$(distuninstallcheck_dir)' >&2; \
905	  exit 1; \
906	}; \
907	$(am__cd) '$(distuninstallcheck_dir)' || { \
908	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
909	  exit 1; \
910	}; \
911	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
912	   || { echo "ERROR: files left after uninstall:" ; \
913	        if test -n "$(DESTDIR)"; then \
914	          echo "  (check DESTDIR support)"; \
915	        fi ; \
916	        $(distuninstallcheck_listfiles) ; \
917	        exit 1; } >&2
918distcleancheck: distclean
919	@if test '$(srcdir)' = . ; then \
920	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
921	  exit 1 ; \
922	fi
923	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
924	  || { echo "ERROR: files left in build directory after distclean:" ; \
925	       $(distcleancheck_listfiles) ; \
926	       exit 1; } >&2
927check-am: all-am
928check: check-recursive
929all-am: Makefile $(PROGRAMS) $(DATA) config.h
930installdirs: installdirs-recursive
931installdirs-am:
932	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)" "$(DESTDIR)$(bitmapdir)"; do \
933	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
934	done
935install: install-recursive
936install-exec: install-exec-recursive
937install-data: install-data-recursive
938uninstall: uninstall-recursive
939
940install-am: all-am
941	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
942
943installcheck: installcheck-recursive
944install-strip:
945	if test -z '$(STRIP)'; then \
946	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
947	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
948	      install; \
949	else \
950	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
951	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
952	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
953	fi
954mostlyclean-generic:
955
956clean-generic:
957
958distclean-generic:
959	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
960	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
961
962maintainer-clean-generic:
963	@echo "This command is intended for maintainers to use"
964	@echo "it deletes files that may require special tools to rebuild."
965	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
966clean: clean-recursive
967
968clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
969
970distclean: distclean-recursive
971	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
972		-rm -f ./$(DEPDIR)/Dvi.Po
973	-rm -f ./$(DEPDIR)/DviChar.Po
974	-rm -f ./$(DEPDIR)/XFontName.Po
975	-rm -f ./$(DEPDIR)/draw.Po
976	-rm -f ./$(DEPDIR)/font.Po
977	-rm -f ./$(DEPDIR)/lex.Po
978	-rm -f ./$(DEPDIR)/page.Po
979	-rm -f ./$(DEPDIR)/parse.Po
980	-rm -f ./$(DEPDIR)/xditview.Po
981	-rm -f Makefile
982distclean-am: clean-am distclean-compile distclean-generic \
983	distclean-hdr distclean-tags
984
985dvi: dvi-recursive
986
987dvi-am:
988
989html: html-recursive
990
991html-am:
992
993info: info-recursive
994
995info-am:
996
997install-data-am: install-dist_appdefaultDATA install-dist_bitmapDATA
998
999install-dvi: install-dvi-recursive
1000
1001install-dvi-am:
1002
1003install-exec-am: install-binPROGRAMS
1004
1005install-html: install-html-recursive
1006
1007install-html-am:
1008
1009install-info: install-info-recursive
1010
1011install-info-am:
1012
1013install-man:
1014
1015install-pdf: install-pdf-recursive
1016
1017install-pdf-am:
1018
1019install-ps: install-ps-recursive
1020
1021install-ps-am:
1022
1023installcheck-am:
1024
1025maintainer-clean: maintainer-clean-recursive
1026	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
1027	-rm -rf $(top_srcdir)/autom4te.cache
1028		-rm -f ./$(DEPDIR)/Dvi.Po
1029	-rm -f ./$(DEPDIR)/DviChar.Po
1030	-rm -f ./$(DEPDIR)/XFontName.Po
1031	-rm -f ./$(DEPDIR)/draw.Po
1032	-rm -f ./$(DEPDIR)/font.Po
1033	-rm -f ./$(DEPDIR)/lex.Po
1034	-rm -f ./$(DEPDIR)/page.Po
1035	-rm -f ./$(DEPDIR)/parse.Po
1036	-rm -f ./$(DEPDIR)/xditview.Po
1037	-rm -f Makefile
1038maintainer-clean-am: distclean-am maintainer-clean-generic
1039
1040mostlyclean: mostlyclean-recursive
1041
1042mostlyclean-am: mostlyclean-compile mostlyclean-generic
1043
1044pdf: pdf-recursive
1045
1046pdf-am:
1047
1048ps: ps-recursive
1049
1050ps-am:
1051
1052uninstall-am: uninstall-binPROGRAMS uninstall-dist_appdefaultDATA \
1053	uninstall-dist_bitmapDATA
1054
1055.MAKE: $(am__recursive_targets) all install-am install-strip
1056
1057.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1058	am--depfiles am--refresh check check-am clean \
1059	clean-binPROGRAMS clean-cscope clean-generic cscope \
1060	cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
1061	dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
1062	dist-zip dist-zstd distcheck distclean distclean-compile \
1063	distclean-generic distclean-hdr distclean-tags distcleancheck \
1064	distdir distuninstallcheck dvi dvi-am html html-am info \
1065	info-am install install-am install-binPROGRAMS install-data \
1066	install-data-am install-dist_appdefaultDATA \
1067	install-dist_bitmapDATA install-dvi install-dvi-am \
1068	install-exec install-exec-am install-html install-html-am \
1069	install-info install-info-am install-man install-pdf \
1070	install-pdf-am install-ps install-ps-am install-strip \
1071	installcheck installcheck-am installdirs installdirs-am \
1072	maintainer-clean maintainer-clean-generic mostlyclean \
1073	mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
1074	tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \
1075	uninstall-dist_appdefaultDATA uninstall-dist_bitmapDATA
1076
1077.PRECIOUS: Makefile
1078
1079
1080.PHONY: ChangeLog INSTALL
1081
1082INSTALL:
1083	$(INSTALL_CMD)
1084
1085ChangeLog:
1086	$(CHANGELOG_CMD)
1087
1088dist-hook: ChangeLog INSTALL
1089
1090# Tell versions [3.59,3.63) of GNU make to not export all variables.
1091# Otherwise a system limit (for SysV at least) may be exceeded.
1092.NOEXPORT:
1093