Makefile.in revision c166fba9 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# 
18#  Copyright 2005  Red Hat, Inc.
19# 
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Red Hat not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Red Hat makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29# 
30#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38
39VPATH = @srcdir@
40am__is_gnu_make = { \
41  if test -z '$(MAKELEVEL)'; then \
42    false; \
43  elif test -n '$(MAKE_HOST)'; then \
44    true; \
45  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
46    true; \
47  else \
48    false; \
49  fi; \
50}
51am__make_running_with_option = \
52  case $${target_option-} in \
53      ?) ;; \
54      *) echo "am__make_running_with_option: internal error: invalid" \
55              "target option '$${target_option-}' specified" >&2; \
56         exit 1;; \
57  esac; \
58  has_opt=no; \
59  sane_makeflags=$$MAKEFLAGS; \
60  if $(am__is_gnu_make); then \
61    sane_makeflags=$$MFLAGS; \
62  else \
63    case $$MAKEFLAGS in \
64      *\\[\ \	]*) \
65        bs=\\; \
66        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
67          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
68    esac; \
69  fi; \
70  skip_next=no; \
71  strip_trailopt () \
72  { \
73    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
74  }; \
75  for flg in $$sane_makeflags; do \
76    test $$skip_next = yes && { skip_next=no; continue; }; \
77    case $$flg in \
78      *=*|--*) continue;; \
79        -*I) strip_trailopt 'I'; skip_next=yes;; \
80      -*I?*) strip_trailopt 'I';; \
81        -*O) strip_trailopt 'O'; skip_next=yes;; \
82      -*O?*) strip_trailopt 'O';; \
83        -*l) strip_trailopt 'l'; skip_next=yes;; \
84      -*l?*) strip_trailopt 'l';; \
85      -[dEDm]) skip_next=yes;; \
86      -[JT]) skip_next=yes;; \
87    esac; \
88    case $$flg in \
89      *$$target_option*) has_opt=yes; break;; \
90    esac; \
91  done; \
92  test $$has_opt = yes
93am__make_dryrun = (target_option=n; $(am__make_running_with_option))
94am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
95pkgdatadir = $(datadir)/@PACKAGE@
96pkgincludedir = $(includedir)/@PACKAGE@
97pkglibdir = $(libdir)/@PACKAGE@
98pkglibexecdir = $(libexecdir)/@PACKAGE@
99am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
100install_sh_DATA = $(install_sh) -c -m 644
101install_sh_PROGRAM = $(install_sh) -c
102install_sh_SCRIPT = $(install_sh) -c
103INSTALL_HEADER = $(INSTALL_DATA)
104transform = $(program_transform_name)
105NORMAL_INSTALL = :
106PRE_INSTALL = :
107POST_INSTALL = :
108NORMAL_UNINSTALL = :
109PRE_UNINSTALL = :
110POST_UNINSTALL = :
111build_triplet = @build@
112host_triplet = @host@
113bin_PROGRAMS = xditview$(EXEEXT)
114subdir = .
115ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
116am__aclocal_m4_deps = $(top_srcdir)/configure.ac
117am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
118	$(ACLOCAL_M4)
119DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
120	$(am__configure_deps) $(dist_appdefault_DATA) \
121	$(dist_bitmap_DATA) $(am__DIST_COMMON)
122am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
123 configure.lineno config.status.lineno
124mkinstalldirs = $(install_sh) -d
125CONFIG_HEADER = config.h
126CONFIG_CLEAN_FILES =
127CONFIG_CLEAN_VPATH_FILES =
128am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)" \
129	"$(DESTDIR)$(bitmapdir)"
130PROGRAMS = $(bin_PROGRAMS)
131am_xditview_OBJECTS = draw.$(OBJEXT) Dvi.$(OBJEXT) DviChar.$(OBJEXT) \
132	font.$(OBJEXT) lex.$(OBJEXT) page.$(OBJEXT) parse.$(OBJEXT) \
133	xditview.$(OBJEXT) XFontName.$(OBJEXT)
134xditview_OBJECTS = $(am_xditview_OBJECTS)
135am__DEPENDENCIES_1 =
136xditview_DEPENDENCIES = $(am__DEPENDENCIES_1)
137AM_V_P = $(am__v_P_@AM_V@)
138am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
139am__v_P_0 = false
140am__v_P_1 = :
141AM_V_GEN = $(am__v_GEN_@AM_V@)
142am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
143am__v_GEN_0 = @echo "  GEN     " $@;
144am__v_GEN_1 = 
145AM_V_at = $(am__v_at_@AM_V@)
146am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
147am__v_at_0 = @
148am__v_at_1 = 
149DEFAULT_INCLUDES = -I.@am__isrc@
150depcomp = $(SHELL) $(top_srcdir)/depcomp
151am__depfiles_maybe = depfiles
152am__mv = mv -f
153COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
154	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
155AM_V_CC = $(am__v_CC_@AM_V@)
156am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
157am__v_CC_0 = @echo "  CC      " $@;
158am__v_CC_1 = 
159CCLD = $(CC)
160LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
161AM_V_CCLD = $(am__v_CCLD_@AM_V@)
162am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
163am__v_CCLD_0 = @echo "  CCLD    " $@;
164am__v_CCLD_1 = 
165SOURCES = $(xditview_SOURCES)
166DIST_SOURCES = $(xditview_SOURCES)
167RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
168	ctags-recursive dvi-recursive html-recursive info-recursive \
169	install-data-recursive install-dvi-recursive \
170	install-exec-recursive install-html-recursive \
171	install-info-recursive install-pdf-recursive \
172	install-ps-recursive install-recursive installcheck-recursive \
173	installdirs-recursive pdf-recursive ps-recursive \
174	tags-recursive uninstall-recursive
175am__can_run_installinfo = \
176  case $$AM_UPDATE_INFO_DIR in \
177    n|no|NO) false;; \
178    *) (install-info --version) >/dev/null 2>&1;; \
179  esac
180am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
181am__vpath_adj = case $$p in \
182    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
183    *) f=$$p;; \
184  esac;
185am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
186am__install_max = 40
187am__nobase_strip_setup = \
188  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
189am__nobase_strip = \
190  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
191am__nobase_list = $(am__nobase_strip_setup); \
192  for p in $$list; do echo "$$p $$p"; done | \
193  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
194  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
195    if (++n[$$2] == $(am__install_max)) \
196      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
197    END { for (dir in files) print dir, files[dir] }'
198am__base_list = \
199  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
200  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
201am__uninstall_files_from_dir = { \
202  test -z "$$files" \
203    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
204    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
205         $(am__cd) "$$dir" && rm -f $$files; }; \
206  }
207DATA = $(dist_appdefault_DATA) $(dist_bitmap_DATA)
208RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
209  distclean-recursive maintainer-clean-recursive
210am__recursive_targets = \
211  $(RECURSIVE_TARGETS) \
212  $(RECURSIVE_CLEAN_TARGETS) \
213  $(am__extra_recursive_targets)
214AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
215	cscope distdir dist dist-all distcheck
216am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
217	$(LISP)config.h.in
218# Read a list of newline-separated strings from the standard input,
219# and print each of them once, without duplicates.  Input order is
220# *not* preserved.
221am__uniquify_input = $(AWK) '\
222  BEGIN { nonempty = 0; } \
223  { items[$$0] = 1; nonempty = 1; } \
224  END { if (nonempty) { for (i in items) print i; }; } \
225'
226# Make sure the list of sources is unique.  This is necessary because,
227# e.g., the same source file might be shared among _SOURCES variables
228# for different programs/libraries.
229am__define_uniq_tagged_files = \
230  list='$(am__tagged_files)'; \
231  unique=`for i in $$list; do \
232    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
233  done | $(am__uniquify_input)`
234ETAGS = etags
235CTAGS = ctags
236CSCOPE = cscope
237DIST_SUBDIRS = $(SUBDIRS)
238am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \
239	ChangeLog INSTALL README compile config.guess config.sub \
240	depcomp install-sh missing
241DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
242distdir = $(PACKAGE)-$(VERSION)
243top_distdir = $(distdir)
244am__remove_distdir = \
245  if test -d "$(distdir)"; then \
246    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
247      && rm -rf "$(distdir)" \
248      || { sleep 5 && rm -rf "$(distdir)"; }; \
249  else :; fi
250am__post_remove_distdir = $(am__remove_distdir)
251am__relativize = \
252  dir0=`pwd`; \
253  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
254  sed_rest='s,^[^/]*/*,,'; \
255  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
256  sed_butlast='s,/*[^/]*$$,,'; \
257  while test -n "$$dir1"; do \
258    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
259    if test "$$first" != "."; then \
260      if test "$$first" = ".."; then \
261        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
262        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
263      else \
264        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
265        if test "$$first2" = "$$first"; then \
266          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
267        else \
268          dir2="../$$dir2"; \
269        fi; \
270        dir0="$$dir0"/"$$first"; \
271      fi; \
272    fi; \
273    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
274  done; \
275  reldir="$$dir2"
276DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
277GZIP_ENV = --best
278DIST_TARGETS = dist-bzip2 dist-gzip
279distuninstallcheck_listfiles = find . -type f -print
280am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
281  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
282distcleancheck_listfiles = find . -type f -print
283ACLOCAL = @ACLOCAL@
284ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
285ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
286AMTAR = @AMTAR@
287AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
288APPDEFS_CFLAGS = @APPDEFS_CFLAGS@
289APPDEFS_LIBS = @APPDEFS_LIBS@
290APP_MAN_DIR = @APP_MAN_DIR@
291APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
292AUTOCONF = @AUTOCONF@
293AUTOHEADER = @AUTOHEADER@
294AUTOMAKE = @AUTOMAKE@
295AWK = @AWK@
296BASE_CFLAGS = @BASE_CFLAGS@
297CC = @CC@
298CCDEPMODE = @CCDEPMODE@
299CFLAGS = @CFLAGS@
300CHANGELOG_CMD = @CHANGELOG_CMD@
301CPP = @CPP@
302CPPFLAGS = @CPPFLAGS@
303CWARNFLAGS = @CWARNFLAGS@
304CYGPATH_W = @CYGPATH_W@
305DEFS = @DEFS@
306DEPDIR = @DEPDIR@
307DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
308DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
309ECHO_C = @ECHO_C@
310ECHO_N = @ECHO_N@
311ECHO_T = @ECHO_T@
312EGREP = @EGREP@
313EXEEXT = @EXEEXT@
314FILE_MAN_DIR = @FILE_MAN_DIR@
315FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
316GREP = @GREP@
317INSTALL = @INSTALL@
318INSTALL_CMD = @INSTALL_CMD@
319INSTALL_DATA = @INSTALL_DATA@
320INSTALL_PROGRAM = @INSTALL_PROGRAM@
321INSTALL_SCRIPT = @INSTALL_SCRIPT@
322INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
323LDFLAGS = @LDFLAGS@
324LIBOBJS = @LIBOBJS@
325LIBS = @LIBS@
326LIB_MAN_DIR = @LIB_MAN_DIR@
327LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
328LTLIBOBJS = @LTLIBOBJS@
329MAKEINFO = @MAKEINFO@
330MAN_SUBSTS = @MAN_SUBSTS@
331MISC_MAN_DIR = @MISC_MAN_DIR@
332MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
333MKDIR_P = @MKDIR_P@
334OBJEXT = @OBJEXT@
335PACKAGE = @PACKAGE@
336PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
337PACKAGE_NAME = @PACKAGE_NAME@
338PACKAGE_STRING = @PACKAGE_STRING@
339PACKAGE_TARNAME = @PACKAGE_TARNAME@
340PACKAGE_URL = @PACKAGE_URL@
341PACKAGE_VERSION = @PACKAGE_VERSION@
342PATH_SEPARATOR = @PATH_SEPARATOR@
343PKG_CONFIG = @PKG_CONFIG@
344SED = @SED@
345SET_MAKE = @SET_MAKE@
346SHELL = @SHELL@
347STRICT_CFLAGS = @STRICT_CFLAGS@
348STRIP = @STRIP@
349VERSION = @VERSION@
350XDITVIEW_CFLAGS = @XDITVIEW_CFLAGS@
351XDITVIEW_LIBS = @XDITVIEW_LIBS@
352XORG_MAN_PAGE = @XORG_MAN_PAGE@
353abs_builddir = @abs_builddir@
354abs_srcdir = @abs_srcdir@
355abs_top_builddir = @abs_top_builddir@
356abs_top_srcdir = @abs_top_srcdir@
357ac_ct_CC = @ac_ct_CC@
358am__include = @am__include@
359am__leading_dot = @am__leading_dot@
360am__quote = @am__quote@
361am__tar = @am__tar@
362am__untar = @am__untar@
363appdefaultdir = @appdefaultdir@
364bindir = @bindir@
365build = @build@
366build_alias = @build_alias@
367build_cpu = @build_cpu@
368build_os = @build_os@
369build_vendor = @build_vendor@
370builddir = @builddir@
371datadir = @datadir@
372datarootdir = @datarootdir@
373docdir = @docdir@
374dvidir = @dvidir@
375exec_prefix = @exec_prefix@
376host = @host@
377host_alias = @host_alias@
378host_cpu = @host_cpu@
379host_os = @host_os@
380host_vendor = @host_vendor@
381htmldir = @htmldir@
382includedir = @includedir@
383infodir = @infodir@
384install_sh = @install_sh@
385libdir = @libdir@
386libexecdir = @libexecdir@
387localedir = @localedir@
388localstatedir = @localstatedir@
389mandir = @mandir@
390mkdir_p = @mkdir_p@
391oldincludedir = @oldincludedir@
392pdfdir = @pdfdir@
393prefix = @prefix@
394program_transform_name = @program_transform_name@
395psdir = @psdir@
396sbindir = @sbindir@
397sharedstatedir = @sharedstatedir@
398srcdir = @srcdir@
399sysconfdir = @sysconfdir@
400target_alias = @target_alias@
401top_build_prefix = @top_build_prefix@
402top_builddir = @top_builddir@
403top_srcdir = @top_srcdir@
404SUBDIRS = man
405AM_CFLAGS = $(XDITVIEW_CFLAGS)
406xditview_LDADD = $(XDITVIEW_LIBS) -lm
407xditview_SOURCES = \
408        draw.c \
409        Dvi.c \
410        DviChar.c \
411        DviChar.h \
412        Dvi.h \
413        DviP.h \
414        font.c \
415        lex.c \
416        Menu.h \
417        page.c \
418        parse.c \
419        xditview.c \
420        XFontName.c \
421        XFontName.h
422
423
424# App default files
425DISTCHECK_CONFIGURE_FLAGS = --with-appdefaultdir=\$${datadir}/X11/app-defaults
426dist_appdefault_DATA = \
427        app-defaults/Xditview \
428        app-defaults/Xditview-chrtr
429
430
431# Bitmaps referenced at runtime
432bitmapdir = $(includedir)/X11/bitmaps
433dist_bitmap_DATA = ldblarrow rdblarrow
434EXTRA_DIST = xdit.bm xdit_mask.bm
435MAINTAINERCLEANFILES = ChangeLog INSTALL
436all: config.h
437	$(MAKE) $(AM_MAKEFLAGS) all-recursive
438
439.SUFFIXES:
440.SUFFIXES: .c .o .obj
441am--refresh: Makefile
442	@:
443$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
444	@for dep in $?; do \
445	  case '$(am__configure_deps)' in \
446	    *$$dep*) \
447	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
448	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
449		&& exit 0; \
450	      exit 1;; \
451	  esac; \
452	done; \
453	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
454	$(am__cd) $(top_srcdir) && \
455	  $(AUTOMAKE) --foreign Makefile
456Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
457	@case '$?' in \
458	  *config.status*) \
459	    echo ' $(SHELL) ./config.status'; \
460	    $(SHELL) ./config.status;; \
461	  *) \
462	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
463	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
464	esac;
465
466$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
467	$(SHELL) ./config.status --recheck
468
469$(top_srcdir)/configure:  $(am__configure_deps)
470	$(am__cd) $(srcdir) && $(AUTOCONF)
471$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
472	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
473$(am__aclocal_m4_deps):
474
475config.h: stamp-h1
476	@test -f $@ || rm -f stamp-h1
477	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
478
479stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
480	@rm -f stamp-h1
481	cd $(top_builddir) && $(SHELL) ./config.status config.h
482$(srcdir)/config.h.in:  $(am__configure_deps) 
483	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
484	rm -f stamp-h1
485	touch $@
486
487distclean-hdr:
488	-rm -f config.h stamp-h1
489install-binPROGRAMS: $(bin_PROGRAMS)
490	@$(NORMAL_INSTALL)
491	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
492	if test -n "$$list"; then \
493	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
494	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
495	fi; \
496	for p in $$list; do echo "$$p $$p"; done | \
497	sed 's/$(EXEEXT)$$//' | \
498	while read p p1; do if test -f $$p \
499	  ; then echo "$$p"; echo "$$p"; else :; fi; \
500	done | \
501	sed -e 'p;s,.*/,,;n;h' \
502	    -e 's|.*|.|' \
503	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
504	sed 'N;N;N;s,\n, ,g' | \
505	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
506	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
507	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
508	    else { print "f", $$3 "/" $$4, $$1; } } \
509	  END { for (d in files) print "f", d, files[d] }' | \
510	while read type dir files; do \
511	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
512	    test -z "$$files" || { \
513	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
514	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
515	    } \
516	; done
517
518uninstall-binPROGRAMS:
519	@$(NORMAL_UNINSTALL)
520	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
521	files=`for p in $$list; do echo "$$p"; done | \
522	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
523	      -e 's/$$/$(EXEEXT)/' \
524	`; \
525	test -n "$$list" || exit 0; \
526	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
527	cd "$(DESTDIR)$(bindir)" && rm -f $$files
528
529clean-binPROGRAMS:
530	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
531
532xditview$(EXEEXT): $(xditview_OBJECTS) $(xditview_DEPENDENCIES) $(EXTRA_xditview_DEPENDENCIES) 
533	@rm -f xditview$(EXEEXT)
534	$(AM_V_CCLD)$(LINK) $(xditview_OBJECTS) $(xditview_LDADD) $(LIBS)
535
536mostlyclean-compile:
537	-rm -f *.$(OBJEXT)
538
539distclean-compile:
540	-rm -f *.tab.c
541
542@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Dvi.Po@am__quote@
543@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/DviChar.Po@am__quote@
544@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/XFontName.Po@am__quote@
545@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/draw.Po@am__quote@
546@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/font.Po@am__quote@
547@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lex.Po@am__quote@
548@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/page.Po@am__quote@
549@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parse.Po@am__quote@
550@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xditview.Po@am__quote@
551
552.c.o:
553@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
554@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
555@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
556@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
557@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
558
559.c.obj:
560@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
561@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
562@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
563@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
564@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
565install-dist_appdefaultDATA: $(dist_appdefault_DATA)
566	@$(NORMAL_INSTALL)
567	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
568	if test -n "$$list"; then \
569	  echo " $(MKDIR_P) '$(DESTDIR)$(appdefaultdir)'"; \
570	  $(MKDIR_P) "$(DESTDIR)$(appdefaultdir)" || exit 1; \
571	fi; \
572	for p in $$list; do \
573	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
574	  echo "$$d$$p"; \
575	done | $(am__base_list) | \
576	while read files; do \
577	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appdefaultdir)'"; \
578	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appdefaultdir)" || exit $$?; \
579	done
580
581uninstall-dist_appdefaultDATA:
582	@$(NORMAL_UNINSTALL)
583	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
584	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
585	dir='$(DESTDIR)$(appdefaultdir)'; $(am__uninstall_files_from_dir)
586install-dist_bitmapDATA: $(dist_bitmap_DATA)
587	@$(NORMAL_INSTALL)
588	@list='$(dist_bitmap_DATA)'; test -n "$(bitmapdir)" || list=; \
589	if test -n "$$list"; then \
590	  echo " $(MKDIR_P) '$(DESTDIR)$(bitmapdir)'"; \
591	  $(MKDIR_P) "$(DESTDIR)$(bitmapdir)" || exit 1; \
592	fi; \
593	for p in $$list; do \
594	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
595	  echo "$$d$$p"; \
596	done | $(am__base_list) | \
597	while read files; do \
598	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(bitmapdir)'"; \
599	  $(INSTALL_DATA) $$files "$(DESTDIR)$(bitmapdir)" || exit $$?; \
600	done
601
602uninstall-dist_bitmapDATA:
603	@$(NORMAL_UNINSTALL)
604	@list='$(dist_bitmap_DATA)'; test -n "$(bitmapdir)" || list=; \
605	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
606	dir='$(DESTDIR)$(bitmapdir)'; $(am__uninstall_files_from_dir)
607
608# This directory's subdirectories are mostly independent; you can cd
609# into them and run 'make' without going through this Makefile.
610# To change the values of 'make' variables: instead of editing Makefiles,
611# (1) if the variable is set in 'config.status', edit 'config.status'
612#     (which will cause the Makefiles to be regenerated when you run 'make');
613# (2) otherwise, pass the desired values on the 'make' command line.
614$(am__recursive_targets):
615	@fail=; \
616	if $(am__make_keepgoing); then \
617	  failcom='fail=yes'; \
618	else \
619	  failcom='exit 1'; \
620	fi; \
621	dot_seen=no; \
622	target=`echo $@ | sed s/-recursive//`; \
623	case "$@" in \
624	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
625	  *) list='$(SUBDIRS)' ;; \
626	esac; \
627	for subdir in $$list; do \
628	  echo "Making $$target in $$subdir"; \
629	  if test "$$subdir" = "."; then \
630	    dot_seen=yes; \
631	    local_target="$$target-am"; \
632	  else \
633	    local_target="$$target"; \
634	  fi; \
635	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
636	  || eval $$failcom; \
637	done; \
638	if test "$$dot_seen" = "no"; then \
639	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
640	fi; test -z "$$fail"
641
642ID: $(am__tagged_files)
643	$(am__define_uniq_tagged_files); mkid -fID $$unique
644tags: tags-recursive
645TAGS: tags
646
647tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
648	set x; \
649	here=`pwd`; \
650	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
651	  include_option=--etags-include; \
652	  empty_fix=.; \
653	else \
654	  include_option=--include; \
655	  empty_fix=; \
656	fi; \
657	list='$(SUBDIRS)'; for subdir in $$list; do \
658	  if test "$$subdir" = .; then :; else \
659	    test ! -f $$subdir/TAGS || \
660	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
661	  fi; \
662	done; \
663	$(am__define_uniq_tagged_files); \
664	shift; \
665	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
666	  test -n "$$unique" || unique=$$empty_fix; \
667	  if test $$# -gt 0; then \
668	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
669	      "$$@" $$unique; \
670	  else \
671	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
672	      $$unique; \
673	  fi; \
674	fi
675ctags: ctags-recursive
676
677CTAGS: ctags
678ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
679	$(am__define_uniq_tagged_files); \
680	test -z "$(CTAGS_ARGS)$$unique" \
681	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
682	     $$unique
683
684GTAGS:
685	here=`$(am__cd) $(top_builddir) && pwd` \
686	  && $(am__cd) $(top_srcdir) \
687	  && gtags -i $(GTAGS_ARGS) "$$here"
688cscope: cscope.files
689	test ! -s cscope.files \
690	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
691clean-cscope:
692	-rm -f cscope.files
693cscope.files: clean-cscope cscopelist
694cscopelist: cscopelist-recursive
695
696cscopelist-am: $(am__tagged_files)
697	list='$(am__tagged_files)'; \
698	case "$(srcdir)" in \
699	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
700	  *) sdir=$(subdir)/$(srcdir) ;; \
701	esac; \
702	for i in $$list; do \
703	  if test -f "$$i"; then \
704	    echo "$(subdir)/$$i"; \
705	  else \
706	    echo "$$sdir/$$i"; \
707	  fi; \
708	done >> $(top_builddir)/cscope.files
709
710distclean-tags:
711	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
712	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
713
714distdir: $(DISTFILES)
715	$(am__remove_distdir)
716	test -d "$(distdir)" || mkdir "$(distdir)"
717	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
718	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
719	list='$(DISTFILES)'; \
720	  dist_files=`for file in $$list; do echo $$file; done | \
721	  sed -e "s|^$$srcdirstrip/||;t" \
722	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
723	case $$dist_files in \
724	  */*) $(MKDIR_P) `echo "$$dist_files" | \
725			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
726			   sort -u` ;; \
727	esac; \
728	for file in $$dist_files; do \
729	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
730	  if test -d $$d/$$file; then \
731	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
732	    if test -d "$(distdir)/$$file"; then \
733	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
734	    fi; \
735	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
736	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
737	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
738	    fi; \
739	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
740	  else \
741	    test -f "$(distdir)/$$file" \
742	    || cp -p $$d/$$file "$(distdir)/$$file" \
743	    || exit 1; \
744	  fi; \
745	done
746	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
747	  if test "$$subdir" = .; then :; else \
748	    $(am__make_dryrun) \
749	      || test -d "$(distdir)/$$subdir" \
750	      || $(MKDIR_P) "$(distdir)/$$subdir" \
751	      || exit 1; \
752	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
753	    $(am__relativize); \
754	    new_distdir=$$reldir; \
755	    dir1=$$subdir; dir2="$(top_distdir)"; \
756	    $(am__relativize); \
757	    new_top_distdir=$$reldir; \
758	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
759	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
760	    ($(am__cd) $$subdir && \
761	      $(MAKE) $(AM_MAKEFLAGS) \
762	        top_distdir="$$new_top_distdir" \
763	        distdir="$$new_distdir" \
764		am__remove_distdir=: \
765		am__skip_length_check=: \
766		am__skip_mode_fix=: \
767	        distdir) \
768	      || exit 1; \
769	  fi; \
770	done
771	$(MAKE) $(AM_MAKEFLAGS) \
772	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
773	  dist-hook
774	-test -n "$(am__skip_mode_fix)" \
775	|| find "$(distdir)" -type d ! -perm -755 \
776		-exec chmod u+rwx,go+rx {} \; -o \
777	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
778	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
779	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
780	|| chmod -R a+r "$(distdir)"
781dist-gzip: distdir
782	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
783	$(am__post_remove_distdir)
784dist-bzip2: distdir
785	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
786	$(am__post_remove_distdir)
787
788dist-lzip: distdir
789	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
790	$(am__post_remove_distdir)
791
792dist-xz: distdir
793	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
794	$(am__post_remove_distdir)
795
796dist-tarZ: distdir
797	@echo WARNING: "Support for distribution archives compressed with" \
798		       "legacy program 'compress' is deprecated." >&2
799	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
800	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
801	$(am__post_remove_distdir)
802
803dist-shar: distdir
804	@echo WARNING: "Support for shar distribution archives is" \
805	               "deprecated." >&2
806	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
807	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
808	$(am__post_remove_distdir)
809
810dist-zip: distdir
811	-rm -f $(distdir).zip
812	zip -rq $(distdir).zip $(distdir)
813	$(am__post_remove_distdir)
814
815dist dist-all:
816	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
817	$(am__post_remove_distdir)
818
819# This target untars the dist file and tries a VPATH configuration.  Then
820# it guarantees that the distribution is self-contained by making another
821# tarfile.
822distcheck: dist
823	case '$(DIST_ARCHIVES)' in \
824	*.tar.gz*) \
825	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
826	*.tar.bz2*) \
827	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
828	*.tar.lz*) \
829	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
830	*.tar.xz*) \
831	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
832	*.tar.Z*) \
833	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
834	*.shar.gz*) \
835	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
836	*.zip*) \
837	  unzip $(distdir).zip ;;\
838	esac
839	chmod -R a-w $(distdir)
840	chmod u+w $(distdir)
841	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
842	chmod a-w $(distdir)
843	test -d $(distdir)/_build || exit 0; \
844	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
845	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
846	  && am__cwd=`pwd` \
847	  && $(am__cd) $(distdir)/_build/sub \
848	  && ../../configure \
849	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
850	    $(DISTCHECK_CONFIGURE_FLAGS) \
851	    --srcdir=../.. --prefix="$$dc_install_base" \
852	  && $(MAKE) $(AM_MAKEFLAGS) \
853	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
854	  && $(MAKE) $(AM_MAKEFLAGS) check \
855	  && $(MAKE) $(AM_MAKEFLAGS) install \
856	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
857	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
858	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
859	        distuninstallcheck \
860	  && chmod -R a-w "$$dc_install_base" \
861	  && ({ \
862	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
863	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
864	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
865	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
866	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
867	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
868	  && rm -rf "$$dc_destdir" \
869	  && $(MAKE) $(AM_MAKEFLAGS) dist \
870	  && rm -rf $(DIST_ARCHIVES) \
871	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
872	  && cd "$$am__cwd" \
873	  || exit 1
874	$(am__post_remove_distdir)
875	@(echo "$(distdir) archives ready for distribution: "; \
876	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
877	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
878distuninstallcheck:
879	@test -n '$(distuninstallcheck_dir)' || { \
880	  echo 'ERROR: trying to run $@ with an empty' \
881	       '$$(distuninstallcheck_dir)' >&2; \
882	  exit 1; \
883	}; \
884	$(am__cd) '$(distuninstallcheck_dir)' || { \
885	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
886	  exit 1; \
887	}; \
888	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
889	   || { echo "ERROR: files left after uninstall:" ; \
890	        if test -n "$(DESTDIR)"; then \
891	          echo "  (check DESTDIR support)"; \
892	        fi ; \
893	        $(distuninstallcheck_listfiles) ; \
894	        exit 1; } >&2
895distcleancheck: distclean
896	@if test '$(srcdir)' = . ; then \
897	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
898	  exit 1 ; \
899	fi
900	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
901	  || { echo "ERROR: files left in build directory after distclean:" ; \
902	       $(distcleancheck_listfiles) ; \
903	       exit 1; } >&2
904check-am: all-am
905check: check-recursive
906all-am: Makefile $(PROGRAMS) $(DATA) config.h
907installdirs: installdirs-recursive
908installdirs-am:
909	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)" "$(DESTDIR)$(bitmapdir)"; do \
910	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
911	done
912install: install-recursive
913install-exec: install-exec-recursive
914install-data: install-data-recursive
915uninstall: uninstall-recursive
916
917install-am: all-am
918	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
919
920installcheck: installcheck-recursive
921install-strip:
922	if test -z '$(STRIP)'; then \
923	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
924	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
925	      install; \
926	else \
927	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
928	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
929	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
930	fi
931mostlyclean-generic:
932
933clean-generic:
934
935distclean-generic:
936	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
937	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
938
939maintainer-clean-generic:
940	@echo "This command is intended for maintainers to use"
941	@echo "it deletes files that may require special tools to rebuild."
942	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
943clean: clean-recursive
944
945clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
946
947distclean: distclean-recursive
948	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
949	-rm -rf ./$(DEPDIR)
950	-rm -f Makefile
951distclean-am: clean-am distclean-compile distclean-generic \
952	distclean-hdr distclean-tags
953
954dvi: dvi-recursive
955
956dvi-am:
957
958html: html-recursive
959
960html-am:
961
962info: info-recursive
963
964info-am:
965
966install-data-am: install-dist_appdefaultDATA install-dist_bitmapDATA
967
968install-dvi: install-dvi-recursive
969
970install-dvi-am:
971
972install-exec-am: install-binPROGRAMS
973
974install-html: install-html-recursive
975
976install-html-am:
977
978install-info: install-info-recursive
979
980install-info-am:
981
982install-man:
983
984install-pdf: install-pdf-recursive
985
986install-pdf-am:
987
988install-ps: install-ps-recursive
989
990install-ps-am:
991
992installcheck-am:
993
994maintainer-clean: maintainer-clean-recursive
995	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
996	-rm -rf $(top_srcdir)/autom4te.cache
997	-rm -rf ./$(DEPDIR)
998	-rm -f Makefile
999maintainer-clean-am: distclean-am maintainer-clean-generic
1000
1001mostlyclean: mostlyclean-recursive
1002
1003mostlyclean-am: mostlyclean-compile mostlyclean-generic
1004
1005pdf: pdf-recursive
1006
1007pdf-am:
1008
1009ps: ps-recursive
1010
1011ps-am:
1012
1013uninstall-am: uninstall-binPROGRAMS uninstall-dist_appdefaultDATA \
1014	uninstall-dist_bitmapDATA
1015
1016.MAKE: $(am__recursive_targets) all install-am install-strip
1017
1018.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1019	am--refresh check check-am clean clean-binPROGRAMS \
1020	clean-cscope clean-generic cscope cscopelist-am ctags ctags-am \
1021	dist dist-all dist-bzip2 dist-gzip dist-hook dist-lzip \
1022	dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
1023	distclean-compile distclean-generic distclean-hdr \
1024	distclean-tags distcleancheck distdir distuninstallcheck dvi \
1025	dvi-am html html-am info info-am install install-am \
1026	install-binPROGRAMS install-data install-data-am \
1027	install-dist_appdefaultDATA install-dist_bitmapDATA \
1028	install-dvi install-dvi-am install-exec install-exec-am \
1029	install-html install-html-am install-info install-info-am \
1030	install-man install-pdf install-pdf-am install-ps \
1031	install-ps-am install-strip installcheck installcheck-am \
1032	installdirs installdirs-am maintainer-clean \
1033	maintainer-clean-generic mostlyclean mostlyclean-compile \
1034	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
1035	uninstall-am uninstall-binPROGRAMS \
1036	uninstall-dist_appdefaultDATA uninstall-dist_bitmapDATA
1037
1038.PRECIOUS: Makefile
1039
1040
1041.PHONY: ChangeLog INSTALL
1042
1043INSTALL:
1044	$(INSTALL_CMD)
1045
1046ChangeLog:
1047	$(CHANGELOG_CMD)
1048
1049dist-hook: ChangeLog INSTALL
1050
1051# Tell versions [3.59,3.63) of GNU make to not export all variables.
1052# Otherwise a system limit (for SysV at least) may be exceeded.
1053.NOEXPORT:
1054