Makefile.in revision cf503b78 
1# Makefile.in generated by automake 1.13.2 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17#  Copyright 2005 Adam Jackson.
18#
19#  Permission is hereby granted, free of charge, to any person obtaining a
20#  copy of this software and associated documentation files (the "Software"),
21#  to deal in the Software without restriction, including without limitation
22#  on the rights to use, copy, modify, merge, publish, distribute, sub
23#  license, and/or sell copies of the Software, and to permit persons to whom
24#  the Software is furnished to do so, subject to the following conditions:
25#
26#  The above copyright notice and this permission notice (including the next
27#  paragraph) shall be included in all copies or substantial portions of the
28#  Software.
29#
30#  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
31#  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
32#  FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.  IN NO EVENT SHALL
33#  ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
34#  IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
35#  CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
36VPATH = @srcdir@
37am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
38am__make_running_with_option = \
39  case $${target_option-} in \
40      ?) ;; \
41      *) echo "am__make_running_with_option: internal error: invalid" \
42              "target option '$${target_option-}' specified" >&2; \
43         exit 1;; \
44  esac; \
45  has_opt=no; \
46  sane_makeflags=$$MAKEFLAGS; \
47  if $(am__is_gnu_make); then \
48    sane_makeflags=$$MFLAGS; \
49  else \
50    case $$MAKEFLAGS in \
51      *\\[\ \	]*) \
52        bs=\\; \
53        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
54          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
55    esac; \
56  fi; \
57  skip_next=no; \
58  strip_trailopt () \
59  { \
60    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
61  }; \
62  for flg in $$sane_makeflags; do \
63    test $$skip_next = yes && { skip_next=no; continue; }; \
64    case $$flg in \
65      *=*|--*) continue;; \
66        -*I) strip_trailopt 'I'; skip_next=yes;; \
67      -*I?*) strip_trailopt 'I';; \
68        -*O) strip_trailopt 'O'; skip_next=yes;; \
69      -*O?*) strip_trailopt 'O';; \
70        -*l) strip_trailopt 'l'; skip_next=yes;; \
71      -*l?*) strip_trailopt 'l';; \
72      -[dEDm]) skip_next=yes;; \
73      -[JT]) skip_next=yes;; \
74    esac; \
75    case $$flg in \
76      *$$target_option*) has_opt=yes; break;; \
77    esac; \
78  done; \
79  test $$has_opt = yes
80am__make_dryrun = (target_option=n; $(am__make_running_with_option))
81am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
82pkgdatadir = $(datadir)/@PACKAGE@
83pkgincludedir = $(includedir)/@PACKAGE@
84pkglibdir = $(libdir)/@PACKAGE@
85pkglibexecdir = $(libexecdir)/@PACKAGE@
86am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
87install_sh_DATA = $(install_sh) -c -m 644
88install_sh_PROGRAM = $(install_sh) -c
89install_sh_SCRIPT = $(install_sh) -c
90INSTALL_HEADER = $(INSTALL_DATA)
91transform = $(program_transform_name)
92NORMAL_INSTALL = :
93PRE_INSTALL = :
94POST_INSTALL = :
95NORMAL_UNINSTALL = :
96PRE_UNINSTALL = :
97POST_UNINSTALL = :
98build_triplet = @build@
99host_triplet = @host@
100subdir = .
101DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
102	$(top_srcdir)/configure $(am__configure_deps) \
103	$(srcdir)/config.h.in COPYING ChangeLog INSTALL README \
104	config.guess config.sub install-sh missing ltmain.sh
105ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
106am__aclocal_m4_deps = $(top_srcdir)/configure.ac
107am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
108	$(ACLOCAL_M4)
109am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
110 configure.lineno config.status.lineno
111mkinstalldirs = $(install_sh) -d
112CONFIG_HEADER = config.h
113CONFIG_CLEAN_FILES =
114CONFIG_CLEAN_VPATH_FILES =
115AM_V_P = $(am__v_P_@AM_V@)
116am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
117am__v_P_0 = false
118am__v_P_1 = :
119AM_V_GEN = $(am__v_GEN_@AM_V@)
120am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
121am__v_GEN_0 = @echo "  GEN     " $@;
122am__v_GEN_1 = 
123AM_V_at = $(am__v_at_@AM_V@)
124am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
125am__v_at_0 = @
126am__v_at_1 = 
127SOURCES =
128DIST_SOURCES =
129RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
130	ctags-recursive dvi-recursive html-recursive info-recursive \
131	install-data-recursive install-dvi-recursive \
132	install-exec-recursive install-html-recursive \
133	install-info-recursive install-pdf-recursive \
134	install-ps-recursive install-recursive installcheck-recursive \
135	installdirs-recursive pdf-recursive ps-recursive \
136	tags-recursive uninstall-recursive
137am__can_run_installinfo = \
138  case $$AM_UPDATE_INFO_DIR in \
139    n|no|NO) false;; \
140    *) (install-info --version) >/dev/null 2>&1;; \
141  esac
142RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
143  distclean-recursive maintainer-clean-recursive
144am__recursive_targets = \
145  $(RECURSIVE_TARGETS) \
146  $(RECURSIVE_CLEAN_TARGETS) \
147  $(am__extra_recursive_targets)
148AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
149	cscope distdir dist dist-all distcheck
150am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
151	$(LISP)config.h.in
152# Read a list of newline-separated strings from the standard input,
153# and print each of them once, without duplicates.  Input order is
154# *not* preserved.
155am__uniquify_input = $(AWK) '\
156  BEGIN { nonempty = 0; } \
157  { items[$$0] = 1; nonempty = 1; } \
158  END { if (nonempty) { for (i in items) print i; }; } \
159'
160# Make sure the list of sources is unique.  This is necessary because,
161# e.g., the same source file might be shared among _SOURCES variables
162# for different programs/libraries.
163am__define_uniq_tagged_files = \
164  list='$(am__tagged_files)'; \
165  unique=`for i in $$list; do \
166    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
167  done | $(am__uniquify_input)`
168ETAGS = etags
169CTAGS = ctags
170CSCOPE = cscope
171DIST_SUBDIRS = $(SUBDIRS)
172DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
173distdir = $(PACKAGE)-$(VERSION)
174top_distdir = $(distdir)
175am__remove_distdir = \
176  if test -d "$(distdir)"; then \
177    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
178      && rm -rf "$(distdir)" \
179      || { sleep 5 && rm -rf "$(distdir)"; }; \
180  else :; fi
181am__post_remove_distdir = $(am__remove_distdir)
182am__relativize = \
183  dir0=`pwd`; \
184  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
185  sed_rest='s,^[^/]*/*,,'; \
186  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
187  sed_butlast='s,/*[^/]*$$,,'; \
188  while test -n "$$dir1"; do \
189    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
190    if test "$$first" != "."; then \
191      if test "$$first" = ".."; then \
192        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
193        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
194      else \
195        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
196        if test "$$first2" = "$$first"; then \
197          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
198        else \
199          dir2="../$$dir2"; \
200        fi; \
201        dir0="$$dir0"/"$$first"; \
202      fi; \
203    fi; \
204    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
205  done; \
206  reldir="$$dir2"
207DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
208GZIP_ENV = --best
209DIST_TARGETS = dist-bzip2 dist-gzip
210distuninstallcheck_listfiles = find . -type f -print
211am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
212  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
213distcleancheck_listfiles = find . -type f -print
214ACLOCAL = @ACLOCAL@
215ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
216ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
217AMTAR = @AMTAR@
218AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
219APP_MAN_DIR = @APP_MAN_DIR@
220APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
221AR = @AR@
222AUTOCONF = @AUTOCONF@
223AUTOHEADER = @AUTOHEADER@
224AUTOMAKE = @AUTOMAKE@
225AWK = @AWK@
226BASE_CFLAGS = @BASE_CFLAGS@
227CC = @CC@
228CCDEPMODE = @CCDEPMODE@
229CFLAGS = @CFLAGS@
230CHANGELOG_CMD = @CHANGELOG_CMD@
231CPP = @CPP@
232CPPFLAGS = @CPPFLAGS@
233CWARNFLAGS = @CWARNFLAGS@
234CYGPATH_W = @CYGPATH_W@
235DEFS = @DEFS@
236DEPDIR = @DEPDIR@
237DLLTOOL = @DLLTOOL@
238DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
239DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
240DRIVER_NAME = @DRIVER_NAME@
241DSYMUTIL = @DSYMUTIL@
242DUMPBIN = @DUMPBIN@
243ECHO_C = @ECHO_C@
244ECHO_N = @ECHO_N@
245ECHO_T = @ECHO_T@
246EGREP = @EGREP@
247EXEEXT = @EXEEXT@
248FGREP = @FGREP@
249FILE_MAN_DIR = @FILE_MAN_DIR@
250FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
251GREP = @GREP@
252INSTALL = @INSTALL@
253INSTALL_CMD = @INSTALL_CMD@
254INSTALL_DATA = @INSTALL_DATA@
255INSTALL_PROGRAM = @INSTALL_PROGRAM@
256INSTALL_SCRIPT = @INSTALL_SCRIPT@
257INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
258LD = @LD@
259LDFLAGS = @LDFLAGS@
260LIBOBJS = @LIBOBJS@
261LIBS = @LIBS@
262LIBTOOL = @LIBTOOL@
263LIB_MAN_DIR = @LIB_MAN_DIR@
264LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
265LIPO = @LIPO@
266LN_S = @LN_S@
267LTLIBOBJS = @LTLIBOBJS@
268MAINT = @MAINT@
269MAKEINFO = @MAKEINFO@
270MANIFEST_TOOL = @MANIFEST_TOOL@
271MAN_SUBSTS = @MAN_SUBSTS@
272MISC_MAN_DIR = @MISC_MAN_DIR@
273MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
274MKDIR_P = @MKDIR_P@
275NM = @NM@
276NMEDIT = @NMEDIT@
277OBJDUMP = @OBJDUMP@
278OBJEXT = @OBJEXT@
279OTOOL = @OTOOL@
280OTOOL64 = @OTOOL64@
281PACKAGE = @PACKAGE@
282PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
283PACKAGE_NAME = @PACKAGE_NAME@
284PACKAGE_STRING = @PACKAGE_STRING@
285PACKAGE_TARNAME = @PACKAGE_TARNAME@
286PACKAGE_URL = @PACKAGE_URL@
287PACKAGE_VERSION = @PACKAGE_VERSION@
288PATH_SEPARATOR = @PATH_SEPARATOR@
289PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
290PCIACCESS_LIBS = @PCIACCESS_LIBS@
291PKG_CONFIG = @PKG_CONFIG@
292PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
293PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
294RANLIB = @RANLIB@
295SED = @SED@
296SET_MAKE = @SET_MAKE@
297SHELL = @SHELL@
298STRICT_CFLAGS = @STRICT_CFLAGS@
299STRIP = @STRIP@
300VERSION = @VERSION@
301XORG_CFLAGS = @XORG_CFLAGS@
302XORG_LIBS = @XORG_LIBS@
303XORG_MAN_PAGE = @XORG_MAN_PAGE@
304abs_builddir = @abs_builddir@
305abs_srcdir = @abs_srcdir@
306abs_top_builddir = @abs_top_builddir@
307abs_top_srcdir = @abs_top_srcdir@
308ac_ct_AR = @ac_ct_AR@
309ac_ct_CC = @ac_ct_CC@
310ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
311am__include = @am__include@
312am__leading_dot = @am__leading_dot@
313am__quote = @am__quote@
314am__tar = @am__tar@
315am__untar = @am__untar@
316bindir = @bindir@
317build = @build@
318build_alias = @build_alias@
319build_cpu = @build_cpu@
320build_os = @build_os@
321build_vendor = @build_vendor@
322builddir = @builddir@
323datadir = @datadir@
324datarootdir = @datarootdir@
325docdir = @docdir@
326dvidir = @dvidir@
327exec_prefix = @exec_prefix@
328host = @host@
329host_alias = @host_alias@
330host_cpu = @host_cpu@
331host_os = @host_os@
332host_vendor = @host_vendor@
333htmldir = @htmldir@
334includedir = @includedir@
335infodir = @infodir@
336install_sh = @install_sh@
337libdir = @libdir@
338libexecdir = @libexecdir@
339localedir = @localedir@
340localstatedir = @localstatedir@
341mandir = @mandir@
342mkdir_p = @mkdir_p@
343moduledir = @moduledir@
344oldincludedir = @oldincludedir@
345pdfdir = @pdfdir@
346prefix = @prefix@
347program_transform_name = @program_transform_name@
348psdir = @psdir@
349sbindir = @sbindir@
350sharedstatedir = @sharedstatedir@
351srcdir = @srcdir@
352sysconfdir = @sysconfdir@
353target_alias = @target_alias@
354top_build_prefix = @top_build_prefix@
355top_builddir = @top_builddir@
356top_srcdir = @top_srcdir@
357SUBDIRS = src
358MAINTAINERCLEANFILES = ChangeLog INSTALL
359all: config.h
360	$(MAKE) $(AM_MAKEFLAGS) all-recursive
361
362.SUFFIXES:
363am--refresh: Makefile
364	@:
365$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
366	@for dep in $?; do \
367	  case '$(am__configure_deps)' in \
368	    *$$dep*) \
369	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
370	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
371		&& exit 0; \
372	      exit 1;; \
373	  esac; \
374	done; \
375	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
376	$(am__cd) $(top_srcdir) && \
377	  $(AUTOMAKE) --foreign Makefile
378.PRECIOUS: Makefile
379Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
380	@case '$?' in \
381	  *config.status*) \
382	    echo ' $(SHELL) ./config.status'; \
383	    $(SHELL) ./config.status;; \
384	  *) \
385	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
386	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
387	esac;
388
389$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
390	$(SHELL) ./config.status --recheck
391
392$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
393	$(am__cd) $(srcdir) && $(AUTOCONF)
394$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
395	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
396$(am__aclocal_m4_deps):
397
398config.h: stamp-h1
399	@if test ! -f $@; then rm -f stamp-h1; else :; fi
400	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
401
402stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
403	@rm -f stamp-h1
404	cd $(top_builddir) && $(SHELL) ./config.status config.h
405$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
406	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
407	rm -f stamp-h1
408	touch $@
409
410distclean-hdr:
411	-rm -f config.h stamp-h1
412
413mostlyclean-libtool:
414	-rm -f *.lo
415
416clean-libtool:
417	-rm -rf .libs _libs
418
419distclean-libtool:
420	-rm -f libtool config.lt
421
422# This directory's subdirectories are mostly independent; you can cd
423# into them and run 'make' without going through this Makefile.
424# To change the values of 'make' variables: instead of editing Makefiles,
425# (1) if the variable is set in 'config.status', edit 'config.status'
426#     (which will cause the Makefiles to be regenerated when you run 'make');
427# (2) otherwise, pass the desired values on the 'make' command line.
428$(am__recursive_targets):
429	@fail=; \
430	if $(am__make_keepgoing); then \
431	  failcom='fail=yes'; \
432	else \
433	  failcom='exit 1'; \
434	fi; \
435	dot_seen=no; \
436	target=`echo $@ | sed s/-recursive//`; \
437	case "$@" in \
438	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
439	  *) list='$(SUBDIRS)' ;; \
440	esac; \
441	for subdir in $$list; do \
442	  echo "Making $$target in $$subdir"; \
443	  if test "$$subdir" = "."; then \
444	    dot_seen=yes; \
445	    local_target="$$target-am"; \
446	  else \
447	    local_target="$$target"; \
448	  fi; \
449	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
450	  || eval $$failcom; \
451	done; \
452	if test "$$dot_seen" = "no"; then \
453	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
454	fi; test -z "$$fail"
455
456ID: $(am__tagged_files)
457	$(am__define_uniq_tagged_files); mkid -fID $$unique
458tags: tags-recursive
459TAGS: tags
460
461tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
462	set x; \
463	here=`pwd`; \
464	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
465	  include_option=--etags-include; \
466	  empty_fix=.; \
467	else \
468	  include_option=--include; \
469	  empty_fix=; \
470	fi; \
471	list='$(SUBDIRS)'; for subdir in $$list; do \
472	  if test "$$subdir" = .; then :; else \
473	    test ! -f $$subdir/TAGS || \
474	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
475	  fi; \
476	done; \
477	$(am__define_uniq_tagged_files); \
478	shift; \
479	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
480	  test -n "$$unique" || unique=$$empty_fix; \
481	  if test $$# -gt 0; then \
482	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
483	      "$$@" $$unique; \
484	  else \
485	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
486	      $$unique; \
487	  fi; \
488	fi
489ctags: ctags-recursive
490
491CTAGS: ctags
492ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
493	$(am__define_uniq_tagged_files); \
494	test -z "$(CTAGS_ARGS)$$unique" \
495	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
496	     $$unique
497
498GTAGS:
499	here=`$(am__cd) $(top_builddir) && pwd` \
500	  && $(am__cd) $(top_srcdir) \
501	  && gtags -i $(GTAGS_ARGS) "$$here"
502cscope: cscope.files
503	test ! -s cscope.files \
504	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
505clean-cscope:
506	-rm -f cscope.files
507cscope.files: clean-cscope cscopelist
508cscopelist: cscopelist-recursive
509
510cscopelist-am: $(am__tagged_files)
511	list='$(am__tagged_files)'; \
512	case "$(srcdir)" in \
513	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
514	  *) sdir=$(subdir)/$(srcdir) ;; \
515	esac; \
516	for i in $$list; do \
517	  if test -f "$$i"; then \
518	    echo "$(subdir)/$$i"; \
519	  else \
520	    echo "$$sdir/$$i"; \
521	  fi; \
522	done >> $(top_builddir)/cscope.files
523
524distclean-tags:
525	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
526	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
527
528distdir: $(DISTFILES)
529	$(am__remove_distdir)
530	test -d "$(distdir)" || mkdir "$(distdir)"
531	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
532	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
533	list='$(DISTFILES)'; \
534	  dist_files=`for file in $$list; do echo $$file; done | \
535	  sed -e "s|^$$srcdirstrip/||;t" \
536	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
537	case $$dist_files in \
538	  */*) $(MKDIR_P) `echo "$$dist_files" | \
539			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
540			   sort -u` ;; \
541	esac; \
542	for file in $$dist_files; do \
543	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
544	  if test -d $$d/$$file; then \
545	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
546	    if test -d "$(distdir)/$$file"; then \
547	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
548	    fi; \
549	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
550	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
551	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
552	    fi; \
553	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
554	  else \
555	    test -f "$(distdir)/$$file" \
556	    || cp -p $$d/$$file "$(distdir)/$$file" \
557	    || exit 1; \
558	  fi; \
559	done
560	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
561	  if test "$$subdir" = .; then :; else \
562	    $(am__make_dryrun) \
563	      || test -d "$(distdir)/$$subdir" \
564	      || $(MKDIR_P) "$(distdir)/$$subdir" \
565	      || exit 1; \
566	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
567	    $(am__relativize); \
568	    new_distdir=$$reldir; \
569	    dir1=$$subdir; dir2="$(top_distdir)"; \
570	    $(am__relativize); \
571	    new_top_distdir=$$reldir; \
572	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
573	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
574	    ($(am__cd) $$subdir && \
575	      $(MAKE) $(AM_MAKEFLAGS) \
576	        top_distdir="$$new_top_distdir" \
577	        distdir="$$new_distdir" \
578		am__remove_distdir=: \
579		am__skip_length_check=: \
580		am__skip_mode_fix=: \
581	        distdir) \
582	      || exit 1; \
583	  fi; \
584	done
585	$(MAKE) $(AM_MAKEFLAGS) \
586	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
587	  dist-hook
588	-test -n "$(am__skip_mode_fix)" \
589	|| find "$(distdir)" -type d ! -perm -755 \
590		-exec chmod u+rwx,go+rx {} \; -o \
591	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
592	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
593	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
594	|| chmod -R a+r "$(distdir)"
595dist-gzip: distdir
596	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
597	$(am__post_remove_distdir)
598dist-bzip2: distdir
599	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
600	$(am__post_remove_distdir)
601
602dist-lzip: distdir
603	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
604	$(am__post_remove_distdir)
605
606dist-xz: distdir
607	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
608	$(am__post_remove_distdir)
609
610dist-tarZ: distdir
611	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
612	$(am__post_remove_distdir)
613
614dist-shar: distdir
615	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
616	$(am__post_remove_distdir)
617
618dist-zip: distdir
619	-rm -f $(distdir).zip
620	zip -rq $(distdir).zip $(distdir)
621	$(am__post_remove_distdir)
622
623dist dist-all:
624	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
625	$(am__post_remove_distdir)
626
627# This target untars the dist file and tries a VPATH configuration.  Then
628# it guarantees that the distribution is self-contained by making another
629# tarfile.
630distcheck: dist
631	case '$(DIST_ARCHIVES)' in \
632	*.tar.gz*) \
633	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
634	*.tar.bz2*) \
635	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
636	*.tar.lz*) \
637	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
638	*.tar.xz*) \
639	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
640	*.tar.Z*) \
641	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
642	*.shar.gz*) \
643	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
644	*.zip*) \
645	  unzip $(distdir).zip ;;\
646	esac
647	chmod -R a-w $(distdir)
648	chmod u+w $(distdir)
649	mkdir $(distdir)/_build $(distdir)/_inst
650	chmod a-w $(distdir)
651	test -d $(distdir)/_build || exit 0; \
652	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
653	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
654	  && am__cwd=`pwd` \
655	  && $(am__cd) $(distdir)/_build \
656	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
657	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
658	    $(DISTCHECK_CONFIGURE_FLAGS) \
659	  && $(MAKE) $(AM_MAKEFLAGS) \
660	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
661	  && $(MAKE) $(AM_MAKEFLAGS) check \
662	  && $(MAKE) $(AM_MAKEFLAGS) install \
663	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
664	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
665	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
666	        distuninstallcheck \
667	  && chmod -R a-w "$$dc_install_base" \
668	  && ({ \
669	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
670	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
671	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
672	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
673	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
674	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
675	  && rm -rf "$$dc_destdir" \
676	  && $(MAKE) $(AM_MAKEFLAGS) dist \
677	  && rm -rf $(DIST_ARCHIVES) \
678	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
679	  && cd "$$am__cwd" \
680	  || exit 1
681	$(am__post_remove_distdir)
682	@(echo "$(distdir) archives ready for distribution: "; \
683	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
684	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
685distuninstallcheck:
686	@test -n '$(distuninstallcheck_dir)' || { \
687	  echo 'ERROR: trying to run $@ with an empty' \
688	       '$$(distuninstallcheck_dir)' >&2; \
689	  exit 1; \
690	}; \
691	$(am__cd) '$(distuninstallcheck_dir)' || { \
692	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
693	  exit 1; \
694	}; \
695	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
696	   || { echo "ERROR: files left after uninstall:" ; \
697	        if test -n "$(DESTDIR)"; then \
698	          echo "  (check DESTDIR support)"; \
699	        fi ; \
700	        $(distuninstallcheck_listfiles) ; \
701	        exit 1; } >&2
702distcleancheck: distclean
703	@if test '$(srcdir)' = . ; then \
704	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
705	  exit 1 ; \
706	fi
707	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
708	  || { echo "ERROR: files left in build directory after distclean:" ; \
709	       $(distcleancheck_listfiles) ; \
710	       exit 1; } >&2
711check-am: all-am
712check: check-recursive
713all-am: Makefile config.h
714installdirs: installdirs-recursive
715installdirs-am:
716install: install-recursive
717install-exec: install-exec-recursive
718install-data: install-data-recursive
719uninstall: uninstall-recursive
720
721install-am: all-am
722	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
723
724installcheck: installcheck-recursive
725install-strip:
726	if test -z '$(STRIP)'; then \
727	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
728	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
729	      install; \
730	else \
731	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
732	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
733	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
734	fi
735mostlyclean-generic:
736
737clean-generic:
738
739distclean-generic:
740	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
741	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
742
743maintainer-clean-generic:
744	@echo "This command is intended for maintainers to use"
745	@echo "it deletes files that may require special tools to rebuild."
746	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
747clean: clean-recursive
748
749clean-am: clean-generic clean-libtool mostlyclean-am
750
751distclean: distclean-recursive
752	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
753	-rm -f Makefile
754distclean-am: clean-am distclean-generic distclean-hdr \
755	distclean-libtool distclean-tags
756
757dvi: dvi-recursive
758
759dvi-am:
760
761html: html-recursive
762
763html-am:
764
765info: info-recursive
766
767info-am:
768
769install-data-am:
770
771install-dvi: install-dvi-recursive
772
773install-dvi-am:
774
775install-exec-am:
776
777install-html: install-html-recursive
778
779install-html-am:
780
781install-info: install-info-recursive
782
783install-info-am:
784
785install-man:
786
787install-pdf: install-pdf-recursive
788
789install-pdf-am:
790
791install-ps: install-ps-recursive
792
793install-ps-am:
794
795installcheck-am:
796
797maintainer-clean: maintainer-clean-recursive
798	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
799	-rm -rf $(top_srcdir)/autom4te.cache
800	-rm -f Makefile
801maintainer-clean-am: distclean-am maintainer-clean-generic
802
803mostlyclean: mostlyclean-recursive
804
805mostlyclean-am: mostlyclean-generic mostlyclean-libtool
806
807pdf: pdf-recursive
808
809pdf-am:
810
811ps: ps-recursive
812
813ps-am:
814
815uninstall-am:
816
817.MAKE: $(am__recursive_targets) all install-am install-strip
818
819.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
820	am--refresh check check-am clean clean-cscope clean-generic \
821	clean-libtool cscope cscopelist-am ctags ctags-am dist \
822	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
823	dist-tarZ dist-xz dist-zip distcheck distclean \
824	distclean-generic distclean-hdr distclean-libtool \
825	distclean-tags distcleancheck distdir distuninstallcheck dvi \
826	dvi-am html html-am info info-am install install-am \
827	install-data install-data-am install-dvi install-dvi-am \
828	install-exec install-exec-am install-html install-html-am \
829	install-info install-info-am install-man install-pdf \
830	install-pdf-am install-ps install-ps-am install-strip \
831	installcheck installcheck-am installdirs installdirs-am \
832	maintainer-clean maintainer-clean-generic mostlyclean \
833	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
834	tags tags-am uninstall uninstall-am
835
836.PHONY: ChangeLog INSTALL
837
838INSTALL:
839	$(INSTALL_CMD)
840
841ChangeLog:
842	$(CHANGELOG_CMD)
843
844dist-hook: ChangeLog INSTALL
845
846# Tell versions [3.59,3.63) of GNU make to not export all variables.
847# Otherwise a system limit (for SysV at least) may be exceeded.
848.NOEXPORT:
849