xref: /xsrc/external/mit/xf86-video-geode/dist/ChangeLog

commit 1a23956758d17a8b4c1d8acebf8acc94358c37b9
Author: Martin-Éric Racine <martin-eric.racine@iki.fi>
Date:   Sun Feb 13 21:52:55 2011 +0200

    Geode 2.11.12

commit 30d46e6c28479e07ac8328b6f4dfc2692eb1ac6d
Author: Martin-Éric Racine <martin-eric.racine@iki.fi>
Date:   Mon Feb 7 00:04:06 2011 +0000

    Stop including "linux/videodev.h" in z4l.c
    V4L1 support was dropped as of Linux kernel 2.6.38

commit 509f6085ce7747d76f638a7a30170c437b296a40
Author: Daniel Drake <dsd@laptop.org>
Date:   Sun Feb 6 20:22:01 2011 +0000

    Fix packed overlay offscreen allocations
    
    Commit 5e72a00ad2 caused packed video data to corrupt glyphs and other
    parts of the screen, but it turns out that the commit actually at fault
    was d681a844e, incorrectly changing the size of the allocated destination
    memory from the number of bytes needed to the number of lines needed.
    
    While fixing this, I noticed that LXAllocateSurface is probably making the
    same mistake, and that the height is probably not calculated correctly for
    some corner cases when calling LXCopyFromSys in the packed
    video path (but I'm not sure about either).
    
    Fixes https://bugs.freedesktop.org/show_bug.cgi?id=33004

commit 66c375d2a1d1eadb38d2cbfe2d08cfec20213cb4
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon Dec 27 15:20:38 2010 +0200

    Geode 2.11.11

commit b9a5a86a402832fe699e43b3030932b50ae821a0
Author: Priit Laes <plaes@plaes.org>
Date:   Wed Dec 15 03:54:13 2010 +0200

    Restoring compatibility down to X server 1.4
    
    Signed-off-by: Priit Laes <plaes@plaes.org>

commit bae443bb46c81702a57d4914b7e56f17e5aa1f3a
Author: Daniel Drake <dsd@laptop.org>
Date:   Tue Nov 30 20:31:49 2010 +0000

    Improve handling of gamma correction in video vs graphics
    
    The LX is a bit odd in that the palette can be used for gamma correction
    of graphics data, or video data, but not both at the same time.
    
    Right now, during X startup, X sets gamma correction (but without any
    actual correction) causing the Geode driver to start using the palette
    for graphics gamma correction. (this is just momentary)
    
    Later on during startup, vg_set_custom_mode() switches to using the
    palette for video gamma correction, and this is the end result.
    
    If you later use xrandr to change the gamma, the palette starts being used
    for graphics again.
    
    If you VT switch, vg_set_custom_mode (momentarily) starts using the palette
    for video, but then X jumps in with a gamma callback causing it to be used
    for graphics again.
    
    End result: no user visible bug, but this is inconsistent.
    As there is no exposed mechanism for changing video gamma I suggest
    we just drop that bit from vg_set_custom_mode(). Then the inconsistency
    goes away.
    
    Downside: this now becomes dependent on X setting gamma during startup.
    I don't know when this was introduced but I think it is recent.
    
    Aditionally, I think I found a (harmless) bug in
    df_set_video_palette_entry, it doesn't do what the comments say.

commit 5873bfa48f1c090d224adbc7ca7df3ebea0b198f
Author: Priit Laes <plaes@plaes.org>
Date:   Sun Dec 12 16:17:24 2010 +0200

    Fix compilation under xorg >1.9.99
    
    Signed-off-by: Priit Laes <plaes@plaes.org>

commit 1d8d02d64e9f5d5dd3788b3b9b1b25866c2ed6b5
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Fri Nov 19 17:24:35 2010 +0200

    LX Panel: lower the 1024x600 refresh rate down to 60Hz.
    
    NOTE: the eCafe EC-800's panel doesn't support a higher refresh rate.

commit 256356912bbc1d1e65db5c3c03c6ae25883a81fb
Author: Frank Huang <frankr.huang@amd.com>
Date:   Fri Nov 19 10:28:31 2010 +0800

    Print the panel mode BIOS uses
    
    Signed-off-by: Frank Huang<frankr.huang@amd.com>

commit 50f9152e2087fd50dfc09e35505c2fbcdd3183b0
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Tue Nov 9 11:12:44 2010 +0200

    Geode 2.11.10

commit ff091333b506855c17ec8ea5f933026221600be9
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Thu Oct 28 13:13:09 2010 +0300

    Revert "Simplify the mode_valid function"
    
    This reverts commit fab58e111b6655602b4f739260a01247ff478f35.

commit fab58e111b6655602b4f739260a01247ff478f35
Author: Huang, FrankR <FrankR.Huang@amd.com>
Date:   Thu Oct 28 15:17:19 2010 +0800

    Simplify the mode_valid function
    
    Signed-off-by: Frank Huang<frankr.huang@amd.com>

commit fb72a210d7de61c49fc66aafa057d8c6a028b907
Author: Huang, FrankR <FrankR.Huang@amd.com>
Date:   Thu Oct 28 15:16:58 2010 +0800

    Revise the entry for 1024x600
    
    *Change the entry of 1024x600 from 3 to 7(That will not affect the entries from
    3 to 6). And BIOS should set the VG_FP_TYPE bit[5:3] to 7.
    *Use 1024x600@80 instead of 1024x600@60 parameters to support more 4:3 resolutions
    
    Signed-off-by: Frank Huang<frankr.huang@amd.com>

commit 9caaf7f8294ef9700e9e20e394fee10cc2b1c9c0
Author: Daniel Drake <dsd@laptop.org>
Date:   Mon Sep 6 18:35:17 2010 -0600

    Don't power down DCON when it is frozen
    
    Putting a frozen DCON to sleep (as happens during regular boot of the XO)
    will cause the frozen image to be corrupted.
    
    Change the behaviour to only sleep when the DCON is not frozen.
    
    http://dev.laptop.org/ticket/10196

commit 87512b72d64370e062d209724994a72368c21df6
Author: Daniel Drake <dsd@laptop.org>
Date:   Mon Sep 6 18:33:48 2010 -0600

    Add get_crtc output function
    
    I don't know why X can't do this itself, but when no get_crtc method is
    provided, X decides that it doesn't know the CRTC of the output and
    decides to reset the mode completely (causing display powerdown, resulting
    in an uncomfortable visual interruption to OLPC's boot process).

commit 5e72a00ad26f2052bb48fef041d6fbd14ba18153
Author: Hunk Cui <Hunk.Cui@amd.com>
Date:   Wed Oct 13 18:26:52 2010 +0800

    Allocate video memory with exaOffscreenAlloc
    
    *Del for deduct the probable size of a video overlay.
    *Use exaOffscreenAlloc allocate the video overlay.
    *Use exaOffscreenAlloc allocate the offscreen surface.
    *XV-video data has to be allocate in offscreen memory range.
    
    Signed-off-by: Hunk Cui <Hunk.Cui@amd.com>

commit 334534cde47f1ffe126e4e665988480fc57a7307
Author: Frank Huang <frankr.huang@amd.com>
Date:   Wed Sep 29 16:45:56 2010 +0800

    Add resolution 1024x600 support for PANEL
    
    *Users can not get 1024x600 by default when using panel without xorg.conf.
    Add this screen resolution to the panel_modes table to support it by default.
    *Users who are using VGA will get this resolution by the monitor EDID. No
    code is needed
    *Use gtf tool to get the parameters
    *Ubuntu bugzilla #433142
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit becaa0ae375e996c2f83192bb84a5c89f94933dd
Author: Frank Huang <frankr.huang@amd.com>
Date:   Wed Sep 29 16:45:42 2010 +0800

    Fix a typo on resolution parameter
    
    *change from 1028 to 1280
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit 89c60efe899f0cda4a52e0574f030c021c4b1ece
Author: Frank Huang <frankr.huang@amd.com>
Date:   Wed Sep 29 16:35:46 2010 +0300

    Mode Validation support on modeline in xorg.conf
    
    *mode validation(lx_output_mode_valid) in this driver should return MODE_OK for
    all modes filtered out by previous process in this function. Otherwise, new
    modelines(conf_modes) will be pruned by Xserver function Xf86PruneInvalidModes.
    The result is that the user can not set arbitrary resolutions. We comply with
    the code of ATI&&Intel mode_valid function to do this.
    *For modes that cannot be supported by the geode driver, it is better to give
    the specific MODE_XXX(such as MODE_CLOCK_RANGE) instead of MODE_BAD.
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit 74e28b83d5b725a134aad264771a7c9a4d0e38df
Author: Hunk <hunk.cui@amd.com>
Date:   Sun Sep 26 18:14:52 2010 +0800

    Modify rotation pitch & reallocate pixmap for bo
    
    *Modify rotation pitch value with crtc_mode_set.
    *Use own wrapper to allocate a pixmap for wrapping a bo.
    *Ubuntu Bugzilla #377929
    *Debian Bugzilla #512020
    
    Signed-off-by: Hunk Cui <Hunk.Cui@amd.com>

commit 7d7cc26011fde18dcce5c6b95cd73a12a71a7f99
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Thu Sep 23 16:17:40 2010 -0300

    lx_display: fix typo

commit 90dda28842ac76a05ae75a4fdd457dd8b8988950
Author: Andres Salomon <dilinger@queued.net>
Date:   Mon Sep 20 11:31:29 2010 -0700

    fix the DCON verification loop for LX output
    
    This is pretty clearly a bug. This should fix it (after all, that
    check is merely to see if the panel is a DCON; we don't care at
    all about the panel bit). This also adds an extra parenthesis in
    the following if() statement for clarity.
    
    I'm resisting the temptation to change GeodeRec's Output member to
    an unsigned long (for now). Bitfields should really be unsigned.
    
    Signed-off-by: Andres Salomon <dilinger@queued.net>

commit 5dfe7dbf6ed122fbbb758be7a5b7d78a199583c7
Author: Frank Huang <frankr.huang@amd.com>
Date:   Wed Sep 1 10:30:35 2010 +0800

    Replace xalloc/xrealloc/xfree/xcalloc with malloc/realloc/free/calloc
    
    * Replace the deprecated functions with new ones
      Refer to "/xserver/include/os.h"
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit fc342655a3d928759467eac8c917effe8f283031
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon Aug 23 07:46:22 2010 +0300

    Geode 2.11.9
    
    We are pleased to announce this maintenance release of xf86-video-geode.
    It features a plethora of bug fixes, a few documentation updates and one
    performance enhancement.
    
    This release also marks the return of AMD to the development team.
    
    Please read the content of NEWS for more details.

commit c77eb79ef24c47ed7431713918a731252ea8153b
Author: Frank Huang <frankr.huang@amd.com>
Date:   Wed Aug 18 15:37:18 2010 +0800

    Fix the PictOpIn and PictOpOut
    
    *Correct the entry for PictOpIn, PictOpOut, PictOpOverReverse
    *Some code format adjustment
    *Delete the maskflag(temp variable)
    *Change the code to make the black region(More reasonable than change
    op from PictOpSrc to PictOpClear)
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit 32a927b8e627b3f9759ccfbff231f5fd22445f02
Author: Frank Huang <frankr.huang@amd.com>
Date:   Wed Aug 18 15:36:49 2010 +0800

    Fix the PictOpInReverse op
    
    *Correct the entry for PictOpOverReverse and PictOpInReverse
    *Correct the channel reverse use, delete direction use
    *Add a function lx_composite_all_black to generate a all zero vectors
    including alpha
    *Modify some comments
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit f0e24491ca676244b2fd6f2d4476e996847824cd
Author: Mart Raudsepp <leio@gentoo.org>
Date:   Mon Aug 16 07:09:43 2010 +0300

    Fix segfault with Option NoAccel
    
    Fixes bug #27725
    
    Breakage from commit 38e86827

commit b0a13d871d9b72da83380d4564ae947ace733b5d
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Aug 15 18:19:00 2010 +0300

    Fix a few typos in NEWS.

commit 66a74e1e7ee5abde9a9eebfece126ba2fdafce9d
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Aug 15 18:13:57 2010 +0300

    Further rephrase the content of NEWS.

commit fc711bc0c3b21fd11ffd1ab590122226799ee904
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Aug 15 18:11:43 2010 +0300

    Fixes the styling of NEWS for consistency.

commit 2c26c5a4399fcf04d402a973ce3da484215d3202
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Aug 15 18:00:41 2010 +0300

    Created a NEWS file to document recent changes.

commit 673d71b970a6d02449c9994e67f337d117d7f075
Author: Frank Huang <frankr.huang@amd.com>
Date:   Thu Aug 12 15:49:53 2010 +0800

    Fix the PictOpOutReverse op
    
    *Correct the entry for PictOutReverse
    *Outside the source picture, the pixels should be all zero when doing
    the PictOpOutReverse rendering with Dst
    *Rename the function name of pict_a8 to add_a8
    *Rename the function name of opover to two_pass
    *Fix the bug in KDE dolphin file browser
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit 2d1a07327ef352b5f36cbd93a280485cafeeb4d4
Author: Frank Huang <frankr.huang@amd.com>
Date:   Thu Aug 12 15:49:36 2010 +0800

    Improve the glyph rendering performance
    
    *Add a PICT_a8 entry in the format we support
    *Use Mart's workaround patch to give geode PictOpAdd correct pSrc
    and pDst format
    *Add a function lx_composite_onepass_pict_a8 to handle the PictOpAdd
    for glyph rendering
    *Performance for "x11perf" command under Fedora 12
                      Past           Now
    -aa10text         4660/sec       53300/sec
    -aa24text         2740/sec       16200/sec
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit fe6ad5942bf3d638bee2e6979f60d9d7128ba1e8
Author: Hunk Cui <Hunk.Cui@amd.com>
Date:   Mon Aug 9 18:03:23 2010 +0800

    Rectify lx_display.c outstanding compiler warnings
    
    *Correct the type of LXAllocShadow from Bool to static Bool.
    
    Signed-off-by: Hunk Cui <Hunk.Cui@amd.com>

commit 1f96e74919fe9442062804de785c6e1008d75bf2
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon Aug 9 10:48:16 2010 +0300

    Revert "Improve the glyph rendering performance"
    
    This reverts commit ebe43da32226eb7bc3ef758c43eff85ac8b8baef as Frank
    pointed out that I mistakenly committed an outdated version of this.

commit 7a523acf985771b2bd45f5d2823c217cd9075b1e
Author: Frank Huang <frankr.huang@amd.com>
Date:   Mon Aug 9 10:43:27 2010 +0800

    Correct two outstanding compiler warnings
    
    *Correct the type from "Q_WORD" to "QQ_WORD" in panel.c
    *Correct the tyep from "char" to "const char" in z4l.c
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit ebe43da32226eb7bc3ef758c43eff85ac8b8baef
Author: Frank Huang <frankr.huang@amd.com>
Date:   Sat Aug 7 16:54:35 2010 +0800

    Improve the glyph rendering performance
    
    *Add a PICT_a8 entry in the format we support
    *Use Mart's workaround patch to give geode PictOpAdd correct pSrc and pDst
    format
    *Add a function lx_composite_onepass_pict_a8 to handle the PictOpAdd for
    glyph rendering
    *Performance for "x11perf -aa10text" has been improved from 4200/s to 47400/s
    on Fedora12
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit 8a61ef8f9f6b9dac6804754572250e59d80bdf06
Author: Hunk Cui <Hunk.Cui@amd.com>
Date:   Mon Jul 12 13:17:18 2010 +0800

    Fix rotation with newer Xserver versions (exaOffscreenAlloc)
    
    *Del for deduct the probable size of a shadow buffer.
    *Use exaOffscreenAlloc allocate the shadow buffer.
    *Rotateeddata has to be allocate in offscreen memory range.
    *Ubuntu Bugzilla #377929
    
    Signed-off-by: Hunk Cui <Hunk.Cui@amd.com>

commit 2bcbc0b64091218d348ad9f699370e4bfde3948b
Author: Hunk Cui <Hunk.Cui@amd.com>
Date:   Mon Jul 12 12:57:39 2010 +0800

    Gamma Correction for fading operation
    
    *Modify integrated palette RAM for gamma-correction of the data stream
    *Let Graphic data passes through the Gamma Correction RAM
    *Special for Screensaver Operation
    *FreeDesktop Bugzilla #27853
    
    Signed-off-by: Hunk Cui <Hunk.Cui@amd.com>

commit ecb741f27de4ca66555d312a4699efc22f873d0e
Author: Huang, FrankR <FrankR.Huang@amd.com>
Date:   Fri Aug 6 11:16:02 2010 +0800

    Fix the Nautilus file browser misrendering issue
    
    This is patch 4 final this week.
    This one has fixed several bugs below:
    1)google chrome hang
    2)Some website using repeat for source picture with PictOpSrc. To sum up, right now this patch has gracefully solved the Nautilus bug and some special rendering under PictOpSrc and PictOpOver I will describe all special conditions I met
    Websites for test before and after this patch:
    	1)http://daduke.org (greater srcX and srcY)
    	2)http://bjdns2.cncmax.cn (negative srcX and srcY)
    
    From: Frank Huang <frankr.huang@amd.com>
    
    *When the srcX or srcY is greater than source width or source height
    (or negative),the driver should do the correct region to render. Add a
    function lx_composite_onepass_special to handle this. The source start
    point should be calculated by a modulus operation.
    *If the opeartion is with a shifted position src, then adjust the
    operation region based on the operations src width and height
    parameters. The rotation condition should be excluded. This part still
    need investigation
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit 5b93fdd42d7d8af4535fd62ce0749f2c4434f9fe
Author: Huang, FrankR <FrankR.Huang@amd.com>
Date:   Fri Jul 23 17:17:49 2010 +0800

    Fix the PictOpOver operation
    
    Fix the PictOpOver operation
    
    *Fix the PictOpOver blend_ops struct. The PictOpOver operation is
    Src + (1-a) * Dest. So change from CIMGP_ALPHA_A_PLUS_BETA_B to
    CIMGP_A_PLUS_BETA_B. And add one pass operation to do the
    Src * (alpha of Mask) if there is a mask
    *Convert the source format in lx_prepare_composite if it is not
    ARGB32 when doing the first pass
    *Add a function lx_do_composite_mask_opover to handle the PictOpOver
    operation, the first pass is to do the Src * (alpha of Mask), the
    second pass is to do the Src + (1-a) * Dest.
    *Due to our off-screen buffer is only 256KB, so split big Mask region
    into several small region(256KB) to do the rendering.
    *Progressbar, scrollbar and button display well with this patch
    *See Free Desktop Bugzilla #28352
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit 969844d51967aa79ce2c151fc5f1bd296d74437a
Author: Huang, FrankR <FrankR.Huang@amd.com>
Date:   Fri Jul 23 17:17:34 2010 +0800

    Fix the PictOpSrc rendering
    
    Fix the PictOpSrc rendering
    
    *Add the maskrepeat variabel to record mask picture's repeat attribute
    *Add the maskflag to record the exaScratch.type when it is COMP_TYPE_MASK
    *Use the PictOpClear to make other non-blending region(out of src or mask)
    to be black if the op is PictOpSrc or PictOpClear
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit 2771fb365107976e76e175e7f8953dd41ecb91c1
Author: Huang, FrankR <FrankR.Huang@amd.com>
Date:   Fri Jul 23 17:17:15 2010 +0800

    Put the one pixel rendering work back to the server to handle if the pMsk is not zero
    
    Put the one pixel rendering work back to the server to handle if the pMsk is not zero
    
    *exaScratch.srcWidth and exaScratch.srcHeight are used to reocrd
    mask's width and mask's height if mask is not zero. So the one pixel
    source's width and height are missing in lx_do_composite. So we must
    fallback. Otherwise, bigger region will be wrongly rendered.
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>

commit e9effca821c1d604aeffeb3d3e7a49539485117d
Author: Daniel Drake <dsd@laptop.org>
Date:   Thu Aug 5 08:08:06 2010 +0300

    http://lists.x.org/archives/xorg-driver-geode/2010-August/000938.html
    https://bugs.freedesktop.org/show_bug.cgi?id=29391
    
    LXCopyFromSys currently is hardcoded to operate on 16bpp data.
    And indeed, when working with packed data (e.g. YUY2), this is the case.
    
    However, it is also used from LXCopyPlanar to copy the planes of I420
    images. In this case, it is on an 8bpp input plane.
    
    Running at 16bpp causes twice as much data to be copied, and ultimately
    causes a buffer overflow leading to crashes such as
    http://dev.laptop.org/ticket/10260
    
    Fix this by deriving the BPP from the input image parameters.

commit f0df6821c454d2b174a071fd846b399e8c2f98f5
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Jul 11 21:28:49 2010 +0300

    Rephrased the FAQ about video rotation to NOT specify a minimum RAM size.

commit f21fb29dbe54e7a237047920a00632752a970da1
Author: Frank Huang <frankr.huang@amd.com>
Date:   Mon Jul 5 16:49:05 2010 +0800

    Correctly calculate the rendering region with the mask picture
    
    If the opeartion is with a shifted position mask, then adjust the
    operation region based on the operations mask width and height
    parameters(instead of clipping based on source width/height)
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>
    Acked-by: Mart Raudsepp <leio@gentoo.org>

commit d8baf45eb79e473fba68b8335b6aaca27df681cf
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed Jun 23 00:41:53 2010 +0300

    Added square braces to all AC_INIT elements.

commit 2d377782abc64281b5fa44825d541a1541b19a10
Author: Jamey Sharp <jamey@minilop.net>
Date:   Tue Jun 22 08:36:40 2010 -0700

    Use new server API to find the root window.
    
    Signed-off-by: Jamey Sharp <jamey@minilop.net>

commit 14b1561dac796c6ad05648e6857028a87acde9ef
Author: Jamey Sharp <jamey@minilop.net>
Date:   Tue Jun 22 08:30:52 2010 -0700

    Adapt to DevPrivate API changes.
    
    This allows the driver to be built against either the old or new
    DevPrivate API.
    
    Signed-off-by: Jamey Sharp <jamey@minilop.net>

commit b47d77360cb428d8892beb93789c83dfa681b26f
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon Jun 21 07:44:31 2010 +0300

    Added FAQ about minimal memory requirements to rotate screen in README.

commit 42481a36f92cf79c76fea229b5143c4fbdea444a
Author: Mart Raudsepp <leio@gentoo.org>
Date:   Mon Jun 14 02:34:20 2010 +0300

    lx_exa: fallback in case of server-side gradients and solid fill
    
    RENDER extension version 0.10 added support for doing server-side
    gradients and solid fills, which we were not handling at all.
    cairo-1.9 started making use of server-side gradients, and we are
    crashing on those, as the source pixmap (pxSrc in lx_prepare_composite)
    doesn't have a drawable in this case, and we were not expecting such
    a possibility.
    So, as the first measure, fallback (three years late) all server-side
    gradients and solid fills instead of crashing, until we have no code
    that tries to accelerate cases of these or aren't sure if we even
    can accelerate any cases.
    
    pSourcePict member was added to xserver in 2005, so no compatibility
    wrapping needed.
    
    Signed-off-by: Mart Raudsepp <leio@gentoo.org>
    Acked-by: Otavio Salvador <otavio@ossystems.com.br>

commit b46d4ff787bce43409d59837d736af0be2b0dda5
Author: Frank Huang <frankr.huang@amd.com>
Date:   Sun Jun 13 18:47:12 2010 +0800

    Prevent the pixmap migration if the geode GP can not do the acceleration.
    
    Bring all the "return FALSE" condition forward from lx_prepare_composite
    to lx_check_composite. The Xserver will handle this condition. See more
    on Freedesktop Bugzilla #27243
    
    Signed-off-by: Frank Huang <frankr.huang@amd.com>
    Acked-by: Mart Raudsepp <leio@gentoo.org>

commit 8e53a62f196dfc4eb1e8769183b00bf4a3122ddc
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Jun 13 03:24:20 2010 +0300

    Clean up and indent the content of COPYING for better clarity.

commit 4302f6961571609a2b8a27a2d21281f758f48f0d
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Jun 13 03:19:18 2010 +0300

    Move the AMD-specific part of the license away from the boilerplate text.

commit 83b8249d91c7bf351f44062b5e42d12b0b8c9a28
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Jun 13 03:15:09 2010 +0300

    Removed superflous duplicate license from COPYING.

commit 854323a434b8fc7b980387f52dc8c80258ca9b64
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Sat Jun 12 15:48:05 2010 -0400

    COPYING: update Copyright notices from the source code
    
    Signed-off-by: Gaetan Nadon <memsize@videotron.ca>

commit e9447f5335681a78cf87ebf8c9659a6fecfc9746
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Wed Sep 9 22:13:40 2009 -0300

    LX: validate display modes
    
    To avoid using virtual desktop by default we now validate the display
    modes.
    
    Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

commit 3a0e9730634f6894ef57793ae6e072656cd125f0
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Sat Oct 10 11:54:53 2009 -0300

    cim: add a new 106.50MHz entry

commit 527e3763343b736e0d9f7a1c7d55a51366bfdc36
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Sat Oct 10 11:53:46 2009 -0300

    cim: properly indent 341.349MHz entry

commit 2f26fd4cc583aa07e31aa3c8edb975ace9bf31eb
Author: Adam Jackson <ajax@redhat.com>
Date:   Tue May 18 13:07:18 2010 -0400

    Remove mibank.h reference
    
    Signed-off-by: Adam Jackson <ajax@redhat.com>

commit cf69c8bde21ee383b471ca82d70c179dfaf78722
Author: Nicolas Boullis <nboullis@debian.org>
Date:   Mon May 10 07:39:20 2010 +0300

    Correctly set the name for the user-specified panel mode.

commit db01a594ac30c730c580bcf9323220b83eb8ce03
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Thu Apr 15 16:36:43 2010 +0300

    Geode 2.11.8

commit a4b8389e50ea92fe361d96da6fe1c2d7caf39a02
Author: Mart Raudsepp <leio@gentoo.org>
Date:   Mon Apr 12 08:53:11 2010 +0300

    lx_exa: bail earlier (in CheckComposite) for non-alpha-only masks.
    
    We should have all the information at CheckComposite already, so don't
    waste time migrating pixmaps for this case, only to fail in PrepareComposite.
    
    Currently more importantly this workarounds EXA fallback failure in
    xserver-1.7+ for this situation, which resulted in many desktop icons not
    getting rendered; bug #27243

commit 46679d0220c8d34bdd46433bffc490c971783ab9
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Fri Mar 26 08:56:56 2010 -0400

    make: use AM_CPPFLAGS rather than DEFAULT_INCLUDES
    
    DEFAULT_INCLUDES is computed by Automake and should not be
    overwritten.
    
    -I. is the same as -I$(srcdir)
    The generated DEFAULT_INCLUDES = -I. -I$(top_builddir)
    
    Signed-off-by: Gaetan Nadon <memsize@videotron.ca>

commit 621de3bf4966b48532ae2bff5f3859a1a6d63241
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Thu Feb 11 19:56:10 2010 +0000

    Bump the minimal autoconf version to 2.59.

commit f67c4f57c06ce4800f2929f65f88b65e22499a65
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Thu Feb 11 21:38:59 2010 +0200

    Bump the minimal xutils macro version to 1.4, as agreed with Gaetan Nadon.

commit 10364d0f667c808641d62339c99564b401683612
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon Feb 8 18:43:27 2010 +0200

    Get rid of unused XFreeXDGA extension.

commit ba9e3975535ffdf05611e96feb578eb01c49544d
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed Feb 3 21:09:53 2010 +0000

    Geode 2.11.7

commit 755b08bd59a5ff968040d657401c0779ba7828d0
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Sat Oct 3 14:46:52 2009 -0300

    GX: refactory mode validation code to be easier to ready
    
    Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

commit 7f044dc2569ddf4328649d857023b7c418f9b1df
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Sat Oct 3 16:01:31 2009 -0300

    LX: fix typo in panel supported modes
    
    Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

commit 52f14e87edf564faa475063f44e8ee5adb4e1368
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Fri Oct 2 00:21:01 2009 -0300

    gfx: document panel related methods available
    
    Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

commit 5798991e7a4d2354e9735f91f8d60f436c6549ab
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Sat Oct 3 16:41:14 2009 -0300

    geode: fix typo in AmdPciProbe

commit 93f0303f79ce29e896e4817e945709c6a1d3df69
Author: Christian Bühler <christian@cbuehler.de>
Date:   Sat Dec 19 18:59:00 2009 +0200

    Geode LX does not support PanelGeometry
    
    Hello,
    
    I believe I found an error in the README, which caused quite a lot of
    confusion for me.
    According to the source, PanelGeometry is only supported by the GX, not
    by the LX, but in the README file, this option is listed on both.
    
    Regards,
    Christian

commit ab9e8fec5e2f2e0ab35890d8102663991d40b4e4
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Tue Dec 15 22:01:02 2009 -0500

    configure.ac: remove unused sdkdir=$(pkg-config...) statement
    
    The sdkdir variable isn't use, so remove the statement.
    
    Acked-by: Dan Nicholson <dbn.lists@gmail.com>
    
    Signed-off-by: Gaetan Nadon <memsize@videotron.ca>

commit a63b523ea694f2badf79827632fb7f0ee8cc1609
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Mon Nov 23 09:24:32 2009 -0500

    Makefile.am: add ChangeLog and INSTALL on MAINTAINERCLEANFILES
    
    Now that the INSTALL file is generated.
    Allows running make maintainer-clean.

commit 58ecaae19472206fd3c642886c787297e6c423d7
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Thu Nov 19 13:45:23 2009 -0500

    Revert "Makefile.am: do not include autogen.sh in distribution #24183"
    
    This reverts commit c77803368611751f828c1cc7b00e77157b7774b3.

commit d39754d3cd76fbc4eca5eb199bbe67db5e25eee8
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Wed Oct 28 14:41:41 2009 -0400

    INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206
    
    Automake 'foreign' option is specified in configure.ac.
    Remove from Makefile.am

commit 29f57f0b92a783f0e1a520b6cf0a6cd211fd9c5f
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Wed Oct 28 14:09:09 2009 -0400

    INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206
    
    Add missing INSTALL file. Use standard GNU file on building tarball
    README may have been updated
    Remove AUTHORS file as it is empty and no content available yet.
    Remove NEWS file as it is empty and no content available yet.

commit 8159be49ec768130c47426b669d7491ebdeb288b
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Mon Oct 26 12:54:21 2009 -0400

    Several driver modules do not have a ChangeLog target in Makefile.am #23814
    
    The git generated ChangeLog replaces the hand written one.
    Update configure.ac to xorg-macros level 1.3.
    Use XORG_DEFAULT_OPTIONS which replaces four XORG_* macros
    Update Makefile.am to add ChangeLog target if missing
    Remove ChangeLog from EXTRA_DIST or *CLEAN variables
    This is a pre-req for the INSTALL_CMD

commit 530f29b38408319e4bd9689e4a1309055644c4a2
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Thu Oct 22 12:34:16 2009 -0400

    .gitignore: use common defaults with custom section # 24239
    
    Using common defaults will reduce errors and maintenance.
    Only the very small or inexistent custom section need periodic maintenance
    when the structure of the component changes. Do not edit defaults.

commit c77803368611751f828c1cc7b00e77157b7774b3
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Sun Sep 27 16:33:51 2009 -0400

    Makefile.am: do not include autogen.sh in distribution #24183
    
    This is a private build script that should not be distributed

commit 1cdb69f2ed0efff76edf90d62ffed72fe65108f5
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Sep 27 14:57:18 2009 +0300

    Geode 2.11.6

commit a504725d2250e663f0a275fd0c02cc849dafe792
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Sep 27 14:55:25 2009 +0300

    Revert "LX: validate display modes"
    
    This reverts commit 3af472f4453f8e92a9f303e64e2796836374d980.
    
    This commit had broken detection of arbitrary non-VESA resolutions,
    which affected the OLPC XO-1 and a number of Geode-based notebooks.

commit 1b1092b11a686febfd3ee20bd18677fcc366faa5
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Tue Sep 22 16:41:59 2009 +0300

    Geode 2.11.5

commit 3af472f4453f8e92a9f303e64e2796836374d980
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Wed Sep 9 22:13:40 2009 -0300

    LX: validate display modes
    
    To avoid using virtual desktop by default we now validate the display
    modes.
    
    Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

commit 6ff8735b25da03f432b755391000bbfe2253b60c
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Tue Sep 8 21:53:49 2009 -0300

    GX: refactor code that allow backward compatibility with old video interfaces
    
    Most of dependent code is now located in a single place. The macro has
    been changed to use a cleaner name to be easier to spot why it is
    needed.
    
    Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

commit 292df8af92d5295c4be1ab0b3ad630a09589eb55
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Fri Sep 18 10:04:38 2009 +0300

    geode: further precised brand names of Geode variants by NSC in README.

commit 869a93c00ce2e9fe739239b4481b5c98e4df9092
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Fri Sep 18 09:26:25 2009 +0300

    Geode: corrected the product names in README.

commit 9184997ac2bf08841f1a40ebf416e49b44d71ff4
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Fri Sep 18 09:15:25 2009 +0300

    geode: Added the PCI vendor and device ID of NSC SC1400 to README.

commit 651310328e3cfc5c4936cf5df1dcaf7d319d20f6
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed Sep 9 19:47:14 2009 +0300

    Switch project URL in README to read-only www host.

commit f6039ef1bc9962caf18a3abb15c7f627ffc6158a
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Wed Sep 9 06:00:00 2009 +0300

    geode: use lowercase vendor id

commit 50b44451c6462bf999e8899715377dd735bc8940
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed Sep 9 00:06:44 2009 +0300

    Added extended info about which Geode driver covers what Geode variant in README.

commit 7af63b86ab9e06b9ccdf1291250afa303b69a885
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sat Sep 5 01:47:11 2009 +0300

    Fixed a typo in src/lx_output.c debug message.

commit 999d1ef343c65ac2324ac1e9c2e72f014cb5610d
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Thu Sep 3 10:56:09 2009 +0300

    Added README about X server dependency bump due to GX Randr dixSetPrivate fix.

commit feea2a0afa67c8be1d1afd743ab45745878c1c91
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon Aug 31 23:28:31 2009 +0300

    Release 2.11.4.1.

commit f1268f3ba8404129d358db3bb1e66f3841f7018a
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon Aug 31 23:24:30 2009 +0300

    Fixed typo in GX2 dixSetPrivate patch. Kudos to Eamon Walsh!

commit 34405a9c5cb0c30d45c12ef6850fc636a964e441
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Fri Aug 28 11:21:57 2009 +0300

    Release 2.11.4.

commit 255c0b985731350fdfd38987a95310e72f4e5381
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Tue Aug 18 07:30:33 2009 -0300

    GX: use XAA by default.
    
    EXA support is broken for GX so we disable it for now.

commit ef3fbd7bd03fa4a9ff966a373ba8ddec94ea8ff5
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Tue Aug 18 14:11:07 2009 +0300

    Revert "GX: use XAA by default."
    
    This reverts commit 09ddb88781bc9ec12531414beabd95e50237fdd5.
    Otavio just sent me a nicer version of this patch.

commit 09ddb88781bc9ec12531414beabd95e50237fdd5
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Tue Aug 18 07:30:33 2009 -0300

    GX: use XAA by default.

commit b28abde0276ddd7f687242f3886f98b0e49a7fc2
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Fri May 22 20:40:16 2009 -0300

    Fix GX RandR to properly use dixSetPrivate.
    
    Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

commit 917a5bf5fdadac1a8799336aa8da2e51f8790eea
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Tue Aug 4 21:33:12 2009 +0300

    Migrated the project URL to the new http://wiki.x.org/wiki/GeodeDriver

commit c2141752ed4520af6d7f5197fcb0c512058db839
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Tue Aug 4 21:00:24 2009 +0300

    Somewhat harmonized the README between xf86-video-cyrix, xf86-video-nsc and xf86-video-geode.
    TODO:
    * Rename http://wiki.x.org/wiki/AMDGeodeDriver
          to http://wiki.x.org/wiki/GeodeDriver
      and install a redirect from the old page.

commit b5419c47138e9a8efc5f946fd08c4488dedcb5ee
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed Jul 29 13:57:15 2009 +0300

    Added missing development dependencies (X.org macros) to FAQ.

commit c088a8dc4e5a37d8e07766c0c26ebc11037407c0
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed Jul 29 12:23:46 2009 +0300

    Added FAQ about building drivers from GIT for testing purposes.

commit a3788ff318f57f64d7317eeaee4d64a466f3745a
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed Jul 29 02:35:04 2009 +0300

    Added FAQ about submitting patches and producing useful backtraces.

commit cab8435d8aef852c4cb1ab71285fa020dcbd7a68
Author: Dave Airlie <airlied@redhat.com>
Date:   Tue Jul 28 15:22:40 2009 +1000

    geode: change to using ABI version check

commit a22b16c0dc757c940461f26bc6e1802b53e860c5
Author: Dave Airlie <airlied@redhat.com>
Date:   Tue Jul 28 13:32:29 2009 +1000

    geode: update for resources/RAC API removal

commit 810dd8f15c40271b75bb8a124709eadb5e4c36a8
Author: Dave Airlie <airlied@redhat.com>
Date:   Tue Jul 28 10:06:20 2009 +1000

    geode: switch to using correct pci config interface

commit 9fd00d01cacae9724649699bf8e0af1e16dbe356
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Wed Jul 15 16:01:37 2009 -0400

    Use XORG_CHANGELOG macro to create ChangeLog. #22611
    
    Adding the macro in configure.ac and use it in Makefile.am
        Refer to: https://bugs.freedesktop.org/show_bug.cgi?id=22611
        Global maintenance on all modules
    
    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>

commit df4745e5565b98cea278f33001f38a64e027e4ce
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date:   Thu Jul 16 11:37:34 2009 +1000

    Update to xextproto 7.1 support.
    
    DPMS header was split into dpms.h (client) and dpmsconst.h (server). Drivers
    need to include dpmsconst.h if xextproto 7.1 is available.
    
    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>

commit 3d9dd15cf30832bdb467e8fe02327f474e1e2130
Author: Chris Ball <cjb@laptop.org>
Date:   Fri Jun 19 09:51:28 2009 -0400

    Release 2.11.3.
    
    Signed-off-by: Chris Ball <cjb@laptop.org>

commit 26bd1287ef4f9e63f4e3722f21c168db3d55099e
Author: Dave Airlie <airlied@redhat.com>
Date:   Wed Jun 10 14:18:12 2009 +1000

    geode: add inputstr.h include explicitly.

commit 1bfde92b1e2c1a386b679b67f1901a57623db633
Author: Adam Jackson <ajax@redhat.com>
Date:   Thu May 28 14:56:22 2009 -0400

    Remove useless loader symbol lists.

commit 106c341c4076f7714cd67e0fcf5942a22554c8f3
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon May 25 23:28:17 2009 +0300

    Cleaned up the FAQ about WXGA modes.

commit 60f37744b09fa1cdf4a3bcfa1a039ac8c984b942
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon May 25 17:51:34 2009 +0300

    Added a FAQ about disabling Panel in BIOS to enable WXGA modes.

commit 639e9c88e588cae55698cfb4063f625c38224afb
Author: Otavio Salvador <otavio@ossystems.com.br>
Date:   Sat May 23 05:52:13 2009 +0800

    Fix GPIO BAR detection with libpciaccess
    
    This patch fixes an issue with the GPIO BAR detection.  Basically,
    with libpciaccess we're finding the ISA device and checking its BARs,
    but we're not bothering to fill in the BAR information via
    pci_device_probe.  This results in a 0'd out bar and:
    
    (EE) GEODE(0): Could not find the GPIO I/O base
    
    Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
    Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
    Signed-off-by: Chris Ball <cjb@laptop.org>

commit 54303b269f1efe04a80177dbb62d7b94882ff45d
Author: Chris Ball <cjb@laptop.org>
Date:   Tue May 12 00:05:07 2009 -0400

    Release 2.11.2.
    
    Signed-off-by: Chris Ball <cjb@laptop.org>

commit b172617909976c4a7d8f05191e23e4647c1a1c96
Author: Kyle McMartin <kyle@redhat.com>
Date:   Mon May 11 23:58:57 2009 -0400

    Crasher fix: Use ExaDriverAlloc() to calloc the EXA struct.
    
    Patch from Kyle McMartin.  A recent exa/exa.c commit from Dave Airlie
    (02ae85c4..) added a new member to the EXA struct, and corresponding
    code to call it if it's non-NULL.  We were using calloc with sizeof()
    that struct at driver-compile-time; as a result, after the ABI change
    the new member contained garbage, passed the EXA test for NULL, was
    called, and segfaulted at startup.
    
    RH bug https://bugzilla.redhat.com/show_bug.cgi?id=500086
    
    Signed-off-by: Chris Ball <cjb@laptop.org>

commit 23e62499a5ecfd9c70db00c181a4801d4898fe83
Author: Chris Ball <cjb@laptop.org>
Date:   Fri Feb 27 10:53:11 2009 -0500

    Revert EXA 3 build fix.
    
    The EXA developers have backed out the ABI bump to version 3.
    
    Signed-off-by: Chris Ball <cjb@laptop.org>

commit 7ce365dafcbeb549fa083b8115475d5b7b01a704
Author: Chris Ball <cjb@laptop.org>
Date:   Tue Feb 24 22:26:39 2009 -0500

    Build fix: Include config.h earlier
    
    geode.h includes exa.h, without anything having included config.h
    (which sets the EXA major version) beforehand; add config.h to geode.h.
    
    Signed-off-by: Chris Ball <cjb@laptop.org>

commit 2c293240f8003b3a52121161d0b0464100fd990d
Author: Chris Ball <cjb@laptop.org>
Date:   Tue Feb 24 12:51:45 2009 -0500

    configure: use AC_DEFINE instead of shell substitution
    
    (This is just cosmetic.)
    
    Signed-off-by: Chris Ball <cjb@laptop.org>

commit c5c7f60b577cc86a670bedea2bd70bd05d5cd128
Author: Chris Ball <cjb@laptop.org>
Date:   Tue Feb 24 11:46:20 2009 -0500

    Build fix: set EXA_DRIVER_KNOWN_MAJOR=3.
    
    We don't use {Prepare,Finish}Access, and:
    
    /home/cjb/xorg-build/include/xorg/exa.h:45:2: error: #error Make sure
    this EXA driver either does not have Prepare/FinishAccess hooks or that
    they can handle EXA_PREPARE_AUX*, and #define EXA_DRIVER_KNOWN_MAJOR 3
    before including exa.h
    
    Signed-off-by: Chris Ball <cjb@laptop.org>

commit da07a540db2078e00e48897b52a5a1f6d283cfeb
Author: Chris Ball <cjb@laptop.org>
Date:   Mon Feb 16 13:37:03 2009 -0500

    Release 2.11.1.
    
    Signed-off-by: Chris Ball <cjb@laptop.org>

commit 4176e9ed24e7b79cefe3e7f4f5d73c7353781f1b
Author: Chris Ball <cjb@laptop.org>
Date:   Mon Feb 16 13:41:48 2009 -0500

    Makefile.am: use "git log" instead of "git-log"
    
    "git-log" doesn't work on my Fedora machine, but "git log" should work
    everywhere.  Some distributions choose not to ship all the git aliases.
    
    Signed-off-by: Chris Ball <cjb@laptop.org>

commit 990ff710c6220cc3d1ba6b9e8fb972bd168b4472
Author: Chris Ball <cjb@laptop.org>
Date:   Sun Feb 15 15:30:09 2009 -0500

    Change OLPC detection heuristic to one that works on upstream kernels
    
    We've been checking whether we have a DCON/are on an OLPC by looking for
    files from the "olpc_dcon" kernel module.  This module isn't upstream yet,
    so this only works for the OLPC custom kernel.  We might as well check for
    an OLPC kernel module that *is* upstream, so that we can run on unmodified
    distributions.  This patch moves us to checking for "olpc-ac" instead.
    
    Signed-off-by: Chris Ball <cjb@laptop.org>

commit e33dc807bf4504ba242cb19ce8024cdb32e10f4d
Author: Chris Ball <cjb@laptop.org>
Date:   Sun Feb 15 00:17:45 2009 -0500

    Fix pMsk=NULL segfault at startup on OLPC
    
    Commit 7c278551c79d7a5898c627341f58fad59b7ae20d uses pMsk without testing
    for non-NULL, and this causes an immediate segfault when running Sugar.
    
    Signed-off-by: Chris Ball <cjb@laptop.org>

commit 7c278551c79d7a5898c627341f58fad59b7ae20d
Author: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Date:   Fri Jan 9 19:32:50 2009 +0200

    Fallback in case of mask transforms as well.
    
    Fixes attachment #21519 test case on bug #15700, but not the initial report.
    Detective work by Michel Dänzer.
    
    Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>

commit 0e65d77a636848b6bc24518d8e45aed506122b49
Author: Jordan Crouse <jordan@cosmicpenguin.net>
Date:   Tue Dec 9 20:54:20 2008 -0700

    2.11.0 release

commit 2a36083f3cb93bd4ab456024d6b6776725085904
Author: Andres Salomon <dilinger@queued.net>
Date:   Thu Dec 4 22:41:59 2008 -0500

    xf86-video-geode: after reloading cursors, hide the cursor
    
    Whenever we reload cursors, the geode driver needs to call hide_cursor()
    to ensure that the cursor is hidden until we finally unhide the cursor.
    Without this, we see ghost cursors during rotation or VT switches.
    
    Signed-off-by: Andres Salomon <dilinger@debian.org>

commit fb2c1af124a56f34c4212bba16e1926889104cb4
Author: Andres Salomon <dilinger@queued.net>
Date:   Thu Dec 4 21:33:22 2008 -0500

    xf86-video-geode: fix up cursor size (again)
    
    The geode hardware (and cimarron) expects cursor memory size to be 48x64,
    and cimarron will zero out the excess when a smaller cursor is used.  It
    would be nice to be able to use the full cursor size, but xorg's interleaving
    stuff requires a cursor width that's a multiple of 32.  Thus, we're stuck
    back at 32x32 for cursor size, but we allocate enough memory for a 48x64
    cursor.
    
    This fixes misc interleaving corruption that we see with 2bpp cursors (when
    converting to ARGB).
    
    Signed-off-by: Andres Salomon <dilinger@debian.org>

commit 356dec75b96e7b235632bb8c5f7cc70002a590b1
Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br>
Date:   Thu Dec 4 02:24:42 2008 -0200

    Ensure symbol GXRandRSetConfig is of public visibility.
    
      Symbol is referenced via LoaderSymbol(), and this patch doesn't
    should provide the same behavior as when compiling with public symbols
    by default.

commit fe7ede0c073bd8dc22f61388b8a5d83f17696113
Author: Andres Salomon <dilinger@queued.net>
Date:   Wed Nov 26 17:56:14 2008 -0500

    xf86-video-geode: change cursor size to match cimarron
    
    When we use ARGB cursors and rotate the screen, we get double cursors
    and stale cursor data left over.  This is because cimarron expects a
    cursor that is smaller than or equal to 48x64, but hardcodes a memory
    shift of 192 bytes (4*48).  This means that if we have a 32x64 cursor,
    cimarron screws it up.  Change the cursor size to 48x64.
    
    Signed-off-by: Andres Salomon <dilinger@debian.org>

commit 8080f7a01cf62a13c5a32013668b2796c23d97a4
Author: Andres Salomon <dilinger@queued.net>
Date:   Wed Nov 26 01:39:28 2008 -0500

    xf86-video-geode: DCON: set the default (physical) screen size if we detect a DCON
    
    We can be assured that a DCON device has an OLPC panel that's 152x114 mm.
    This adds fields to GeodeRec to allow other panels to potentially
    override physical width/height fields, and also allows xorg.conf to
    override the values.
    
    Signed-off-by: Andres Salomon <dilinger@debian.org>

commit f57f2bd7161d4a7c2ededfc43a7709fb06213b99
Author: Jordan Crouse <jordan@cosmicpenguin.net>
Date:   Tue Nov 25 11:36:03 2008 -0700

    LX:  Set default scaling coefficients
    
    Systems without a traditional BIOS may not have the default
    scaling coefficients set up - make sure that we force them on
    when the mode gets set.

commit d7f73aca763eb2fa918c3e5a27e264aa14f653d1
Author: Alan Coopersmith <alan.coopersmith@sun.com>
Date:   Wed Nov 19 12:06:06 2008 -0800

    include <errno.h> instead of <sys/errno.h>
    
    Solaris defines errno itself in <errno.h>

commit fa38cc225ef39aeb6a2ab1c90a233b285d4c77f8
Author: Jordan Crouse <jordan@cosmicpenguin.net>
Date:   Tue Nov 18 20:07:53 2008 -0700

    LX:  Put back variable needed when PCIACCCESS is defined

commit c4142d3a05e4b889f7933dcfa8bc9cd744ccfdd6
Author: Jordan Crouse <jordan@cosmicpenguin.net>
Date:   Tue Nov 18 15:41:58 2008 -0700

    LX:  Make the version in configure.ac reflect the upcoming release

commit cf0655edbcbd3910c12c33d8c786cc72c0242786
Author: Jordan Crouse <jordan@cosmicpenguin.net>
Date:   Tue Nov 18 15:41:58 2008 -0700

    LX: Change the way EXA memory is allocated
    
    Change how EXA memory is allocated to better allow for
    EXA + video + rotation to co-exist on the system.  Change
    the video to only allocate memory when it needs it.
    Also, automatically disable compression when there is less then
    16Mb of memory.

commit ee23fd75f5eb4447ca238694cc03fcdc219ee245
Author: Jordan Crouse <jordan@cosmicpenguin.net>
Date:   Tue Nov 18 15:41:58 2008 -0700

    LX:  Fix the memory allocated by the video so it fails
    when there isn't enough memory.

commit aac2e161818494b88677f11115bca890a552c709
Author: Jordan Crouse <jordan@cosmicpenguin.net>
Date:   Tue Nov 18 15:41:58 2008 -0700

    LX:  Fix a bug in the memory allocator

commit fc772694ec04f729b5a1cdced7f33dc406c1d67f
Author: Andres Salomon <dilinger@queued.net>
Date:   Tue Nov 18 14:14:17 2008 -0500

    DCON: Mark 1200x900 mode as preferred.

commit 1e3fcaaa67dde12a658206f3b0fd07b627a3b61b
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue Oct 7 13:12:19 2008 -0600

    geode: Move the hardware cursor support to full ARGB mode

commit f66c9d1928ec9bcde57009c7263f6c8575ad0d0c
Merge: 85d2103 62d2b0e
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Sep 10 17:33:30 2008 -0600

    Merge branch 'randr12-branch'
    
    Conflicts:
    
    	src/geode_ddc.c
    	src/gx_randr.c
    	src/lx_randr.c
    	src/lx_rotate.c

commit 85d2103a90e6ab422246b66d252dbee19c96a0d7
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Mon Sep 8 15:20:51 2008 -0600

    XINPUT_ABI bumped on us and broke the previous evil workaround
    for the miPointerPosition issue.

commit 62d2b0ede08042147ca528be9ab1e392886a10ff
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Sep 4 17:43:32 2008 -0600

    LX:  RandR 1.2 updates for Lenny
    
    Fix some build issues for Lenny and make the branch work
    on an XO running Lenny.

commit 526da8a3b279dbfc35505ebb1ddc4b8db8dc46d3
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Aug 28 16:59:41 2008 -0600

    LX:  Fix a possible segfault in EXA
    
    Avoid passing a null pointer to PictureTransformPoint

commit c6339a360b611514155e5101dc2c5bc6472d8865
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Mon Aug 25 11:34:36 2008 -0600

    [LX] - RandR 1.2 updates
    
    Remove a flag that was making EXA pixmaps break horribly.
    Also, Make the new code compile for Hardy and warning cleanups.

commit 38e868271bd24be7a884c8c56772b25cd6fa6f1d
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Mon Aug 18 14:19:34 2008 -0600

    lx:  Add rotation for Randr 1.2 + cleanups
    
    Enable rotation through RandR 1.2 and add the accelerated rotation blit
    the EXA composite function.  Also, fix a handful of critical bugs and
    remove some more dead code.

commit f8a09702f0905d45a03cc71ae67767b7effc1500
Author: Adam Jackson <ajax@redhat.com>
Date:   Fri Aug 15 14:25:00 2008 -0400

    s/XF86_VERSION_CURRENT/XORG_VERSION_CURRENT/

commit b06f75895b6363816bf88402a233800631718f4d
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Fri Aug 15 14:13:12 2008 +0300

    Bump to version 2.10.1 and release.

commit 6908dda7ac66cbe13737db6c9c3e5ebe16156099
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed Aug 13 09:51:23 2008 +0300

    Added info about the current roadmap.

commit 89c6a947f31af15a8f65706de328300ea2e75f1a
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed Aug 13 09:32:21 2008 +0300

    All your typos are belong to us!!!

commit 4e95ee76d47982450ec112988adb2079658bb682
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed Aug 13 09:25:49 2008 +0300

    Updated the README with the URL of the Geode X.Org wiki and
    with info on the current Build Dependencies.

commit 316e89aa58f4d7f3cb4513a6decb035e99abc7d6
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Aug 7 14:29:50 2008 -0600

    Geode: Add DDC support for the CS5535

commit f89f6d8004a0ae0ae7826f72a1058d26e9e0217a
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Jul 24 10:47:57 2008 -0600

    lx: Fix rotate issue
    
    EXA pixmaps are now protected against outside intrusion, so use
    a different way to find the base of the shadow buffer for rotation.

commit d681a844e448712a9a419d2a4dca81930d39a80a
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Aug 7 11:21:48 2008 -0600

    [LX] - Add RandR 1.2 support
    
    A wholesale update to Randr 1.2 for LX accompanied by massive
    cleanup.

commit e98927f2c60acd9262cfb6fca2491fe0decc7aa5
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Jun 13 15:59:44 2008 -0600

    Bump to version 2.10.0

commit 2fc546c0d129fe7d3edee6b0cbfd530de33e2209
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue Jun 10 12:08:53 2008 -0600

    geode:  Bring over the DCON detection code from the OLPC tree

commit 489546dfd2dd295db63f31e123b0073a6fa330a9
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue Jun 10 12:08:52 2008 -0600

    geode:  Unmap the PCI memory when we close the screen

commit 739eb15da7bb0d2ca681eeb9a308b1297ee4eca7
Author: Peter Hutterer <peter@cs.unisa.edu.au>
Date:   Wed May 28 11:13:54 2008 +0930

    Fix build for git-master (missing device pointers).
    
    We don't have an updated Video ABI yet, so use the XINPUT ABI as check for
    when to use which call.
    
    Note that the check is not optimal. We only check for the position of the VCP,
    not of any other device to adjust the viewpoint. This needs to be fixed.

commit 5186a2b736e30b7d68a75f861f51047491182e57
Author: Peter Hutterer <peter@cs.unisa.edu.au>
Date:   Wed May 28 10:54:09 2008 +0930

    Revert "Fix build (missing device pointers)."
    
    Silly me, this breaks the build for non-git-master servers.
    
    This reverts commit 3005e9c7eb10e212c956e87b3631548e268c794e.

commit 3005e9c7eb10e212c956e87b3631548e268c794e
Author: Peter Hutterer <peter@cs.unisa.edu.au>
Date:   Wed May 28 09:25:06 2008 +0930

    Fix build (missing device pointers).
    
    miPointerGetScreen, miPointerGetPosition and pScreen->SetCursorPosition all
    require a device argument now. For lack of other choices, just pass in the
    VCP.

commit 94b9029e335ddbe7c22a8fe4bf69858b75179219
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed May 7 22:35:23 2008 +0300

    Making libDDC support the 2.9.0 release.

commit 61663593475f61567466c105ca19d5009a4e9c41
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue Apr 15 14:54:57 2008 -0600

    geode:  Add "native" DDC parsing to the Geode driver
    
    Teach libDDC to access the DDC pins on the Geode natively, instead
    of using the BIOS which has proven to be broken time and time again.

commit 401a7ed390beca4d37121575e64b72969d55fa7c
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue Apr 1 13:41:48 2008 -0600

    geode: Bump to new version and replace two instances of the old amd name

commit e93660928499f963d477720b628a05e8d14ea197
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Mar 14 16:38:21 2008 -0600

    amd: Missed a merge artifact - kick me in the head for breaking tinderbox

commit c42454a5d1fba9dc0ef4d671cb839108ef827ec9
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Mar 14 13:57:14 2008 -0600

    amd: fix compile and warning issues from the merge

commit 5e1f6e925bd92c389169c971502b1fd17c625056
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Mar 14 13:55:23 2008 -0600

    amd: fix up the versioning and naming of the new driver

commit 1fd63467e3fa71f289f80dba013046d0065ff3f3
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue Mar 11 16:21:58 2008 -0600

    Massive coding style fixup - move to X coding style,
    remove trailing whitespace, zap unused files and
    remove blocks of ifdefed out code.

commit ec8edd1393f482ca42b401463f0f09580aa263a0
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue Mar 11 15:43:00 2008 -0600

    First stage of the rename process - get rid of all amd_ prefixes -
    change either to geode_ or just to lx_ or gx_ depending on the processor.
    Change the name in the Makefiles and other collateral

commit a7bc1a7f6b439419fc27b669d9d7f99f882d83fe
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Mar 13 17:30:03 2008 -0600

    amd: release version 2.7.7.7
    
    xf86-video-amd is now dead - long live xf86-video-geode!

commit 248a1f24c9f232cb9d5218faee5d4f7f014ef9c5
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Mar 13 16:01:21 2008 -0600

    amd: fix panel and DDC interation with GX

commit d8f8277c89752286da329c50b769986a19b521de
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Mar 13 15:00:36 2008 -0600

    amd: Fix a compile error in < 1.5 builds

commit 95159125cb19acdfb23ee5042acf9d8b9d776c7a
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Mar 12 14:14:45 2008 -0600

    amd: Add the 'geode' name in preparation for the renaming

commit b884e17eb74f6b7f11f4bba71ce0421cd0d28855
Author: Stefano Fedrigo <aleph@develer.com>
Date:   Wed Mar 12 14:13:55 2008 -0600

    amd: Add libpciaccess probe function

commit 01a23f48f4777c705eb4345b3d5e27b6a4f73254
Author: Dave Airlie <airlied@redhat.com>
Date:   Mon Mar 10 19:21:07 2008 +1000

    amd: fix distcheck

commit 0464e1e6b7587aaf87b818fabd93e484f9bc8288
Author: Dave Airlie <airlied@linux.ie>
Date:   Mon Mar 10 18:56:22 2008 +1000

    amd: fixup pciaccess compile

commit eec3a36983867611c9ee401079a8c3a81181d941
Author: Dave Airlie <airlied@linux.ie>
Date:   Mon Mar 10 18:56:08 2008 +1000

    fix devprivates properly

commit 68e3f6c80c1db7c84e176ef298c700ce5bedd501
Author: Dave Airlie <airlied@redhat.com>
Date:   Mon Mar 10 18:38:49 2008 +1000

    old privates v2

commit 497a081b8fc5d22890b3555589dfc4d2f9c9b6f6
Author: Dave Airlie <airlied@redhat.com>
Date:   Mon Mar 10 17:09:18 2008 +1000

    amd: move to new devprivates

commit da6ca8ff17373428844f904bbc3a1d0e55c8e5c2
Author: Dave Airlie <airlied@clockmaker.usersys.redhat.com>
Date:   Mon Mar 10 16:54:25 2008 +1000

    pciaccess: fix name of struct

commit 0899664b9f9dc7a9a7fafab008e145f5e3340ac9
Author: Dave Airlie <airlied@redhat.com>
Date:   Mon Mar 10 16:47:53 2008 +1000

    pciaccess: forgot some commas

commit 0e655a383d3fa8d6757b6b785451468ed1550443
Author: Dave Airlie <airlied@redhat.com>
Date:   Mon Mar 10 16:25:09 2008 +1000

    oops I did it again.. forgot the damn include

commit 2b7d32a60ffa6c87fa7a89eb206ed8916a682d93
Author: Dave Airlie <airlied@redhat.com>
Date:   Mon Mar 10 16:22:57 2008 +1000

    amd: initial pciaccess conversion

commit 1e763626aaefa1ae0cf4d4896c0b7192955e5993
Author: Bart Trojanowski <bart@jukie.net>
Date:   Sun Mar 2 11:52:01 2008 +0200

    Implement support for wide and non-standard screen resolutions.
    
    Works fine on the VGA output, but requires further testing to
    ensure that it doesn't disturb operation on the TFT output.

commit 2a7240e845ba27a9d2f485fda0bb5f8175234454
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Feb 10 01:55:06 2008 +0200

    Erm... That would be pScrni, of course.

commit ae448a3beafe001c2bbc60f9fa09ebcfb00e828f
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Feb 10 01:50:26 2008 +0200

    Added trivial fix for Gamma initialization.

commit 4670abb6036379245995f000dcb7d3e33f39570f
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sat Jan 26 01:51:39 2008 +0200

    [GX/LX] Bump the default pixel depth up to 16-bit.
    
    This is a reasonable compromise between memory consumption
    and picture readability. This also gives the driver usable
    defaults for X server >= 1.3 when used with -configure.

commit 2ac6c6e3764f4e6ae014af23db6b5211bb034424
Author: Bernardo Innocenti <bernie@codewiz.org>
Date:   Sat Jan 26 01:46:24 2008 +0200

    Constify a few huge tables to reduce data section size.
    
    This driver is still unusually big compared to the other X.org
    drivers. The biggest offender is cimarron.o as demonstrated by:
    
    nm -S -t d cimarron.o | sort -k 2 -n

commit db25e615f81ea94e1c3e82a408c09d915389d3b7
Author: Bernardo Innocenti <bernie@codewiz.org>
Date:   Mon Jan 14 01:43:16 2008 +0100

    amd_drv: Remove a few (harmless) warnings
    
    Signed-off-by: Bernardo Innocenti <bernie@codewiz.org>

commit ba2880433912cd63c68cd81682d8e48c3cf77a09
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon Jan 14 12:32:13 2008 +0200

    Expanded the bug reporting URL in configure.ac to specify the Driver/AMD component.

commit cf5e5d2b37de2504b76d96e1f26a5450550b8320
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon Jan 14 03:05:48 2008 +0200

    Basic OLPC support from Bernardo Innocenti and Jordan Crouse.

commit 471f96cf85c6db9952ff4443f84a3c8d701927e7
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Tue Jan 8 13:57:25 2008 -0700

    Trivial patch to fix the ZTV module

commit 407f403583f901bbb38d267b9194835d5255d41c
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sat Jan 5 06:29:59 2008 +0200

    [GX][LX] Push PreInit fixes to avoid segfauls on X -configure.
    
    This is known to work on products with GeodeROM and Insyde BIOSes.
    
    On products with a General Software BIOS, a freeze occurs while X
    is probing VBE.  The same issue occurs with LinuxBIOS and VGAROM,
    but not with LinuxBIOS omitting VGAROM.
    
    Both issues appear to be caused by X server core upgrading from
    vm86 to x86emu since X server release 1.3, which requires fixing
    x86emu, or the concerned BIOSes, or both.

commit cc570675d97af7b0f4f6a70af0e7e01c89690aa1
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Mon Dec 24 13:00:48 2007 -0700

    [GX]  Fix the autoconfigure segfault for GX too

commit f1482feb5b210095c564e2cad5bfd6d6e4e2cd78
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Mon Dec 24 11:56:19 2007 -0700

    [LX] Re-arrange PreInit to avoid segfaults in Xorg -configure
    
    Re-arrange the early part of PreInit so that Xorg -configure can run
    cleanly.

commit d4cd5d91a015088d548736831edd31760bcda88d
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon Oct 15 16:32:56 2007 +0300

    Bumped package version to 2.7.7.3.

commit 5833df9f71af8253f02a360c1b0e5e36ba2e4910
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Sep 28 09:05:56 2007 -0600

    [XORG] Fix video downscaling
    
    When downscaling the window, apparently the clip region doesn't
    change (not sure why), so we didn't get the message to re-init
    the video.   This will make the re-init process happen on both
    the clip region changing and the width/height changing.

commit dfe2ab1ea3c1a66952b6d38e436a064d677e5fba
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue Sep 18 13:45:10 2007 -0600

    [XORG] Remove the upload function for LX
    
    Remove the upload function for LX.  The default function is going to be
    faster for all 0xCC BLTs; which just so happens to be what all the
    uploads will be.

commit b795643e860548eff6f1a458391e56098c490f64
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon Sep 17 14:57:22 2007 +0300

    Update the package version in configure.ac

commit 65a629fb9861f51f7591bfc1d80068194e7f840e
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Mon Sep 17 14:55:49 2007 +0300

    ChangeLog DOES need to be cleaned, but in MAINTIANERCLEANFILES.

commit 5179095e4e9ba4e699f6965b752df932d2808155
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed Sep 12 10:53:34 2007 +0300

    Creating a release of course requires updating the package version...

commit 39be7f612783fcc6e51ee0a502e4630661fab702
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed Sep 12 09:04:08 2007 +0300

    We no longer delete the ChangeLog in the clean target. We will simply overwrite it instead.

commit 48b20f8c1424e953485149b707318386339e2953
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Sep 2 13:28:57 2007 +0300

    Erm... actually, the ChangeLog needs ot be removed, since it's generated at release time.

commit 4ade6759760b52ed3b84a846f9c4f5f421a70ef8
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Sep 2 13:18:28 2007 +0300

    Commit the clean 2.7.7.0 ChangeLog to GIT.

commit 1d1b3005a741b04331fecb1453a0c5c6381518a7
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Sep 2 12:54:30 2007 +0300

    Added the standard X.org ChangeLog generation target to Makefile.am

commit f159ec89c2e1fd33a52d8f0375233c5fb06bc6f0
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Sep 2 12:46:40 2007 +0300

    Reverted autogen.sh changes too, since the 'dist' target does what we need.

commit bae63fbe0871229ecd9fca75043065c15a8ea9dc
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Sep 2 12:39:06 2007 +0300

    Reverted the autotool file generation from the GIT tree.

commit 1afba2099aaefead9e87827c60dea146d6e264f3
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Sep 2 10:18:49 2007 +0300

    Regenerated configure based on new package version.

commit e525ca0d68faed9ede9f55df6d0d4a3099d3ad49
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Sun Sep 2 10:05:49 2007 +0300

    Bumped the package version to 2.7.7.0 and calling it a release.

commit 47c1bc40e2a06ac84953f4a8b62031fb978ab316
Author: Martin-Eric Racine <q-funk@yonix.lan>
Date:   Wed Aug 29 22:02:23 2007 +0300

    Updated the ChangeLog.

commit b29cce202abb0c6afb30ec1f06c98d7f84e8d2e4
Author: Martin-Eric Racine <q-funk@yonix.lan>
Date:   Wed Aug 29 22:01:28 2007 +0300

    Regenerated ChangeLog and autotool files.

commit a6192811e21c9f8d17b409018f945adc2eea3594
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Aug 2 10:45:14 2007 -0600

    Fix the upload / composite mask race
    
    We fix a race with the upload function when using a composite mask
    by using the exa core function exaGetPixmapFirstPixel, which does
    the right thing in X 1.4 and newer.  For older versions, the fix is
    to stall the pipeine to ensure the upload is complete, so thats what
    we do.

commit 8ce4c5cc9650ddc81d9243bc416522800bce3afc
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Wed Jul 25 09:55:25 2007 -0600

    Add the all-important if/then loop to avoid
    squashing the ChangeLog if autogen.sh is executed outside of a git
    tree.

commit bb0f0afc6c5cf849081a007af0c2d3485e87e9c4
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Fri Jul 13 12:34:45 2007 -0600

    This autogen.sh implements ChangeLog generation from the git commit
    log. It also calls the correct Makefile macro to clean up after
    maintainer configuration, instead of cleaning up by hand.

commit 08c26f1bda66b8ffd91e345cdd2cb29171b615b3
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue Jul 10 15:16:12 2007 -0600

    Fix "old-school" MSR accesses
    
    This fixes the "old" way of reading MSRs (through virtual registers) -
    we had swapped arguments in one of the macros, which does very bad
    things to the poor systems it was running on.

commit 9f8ea76662733cec5ee6289727c143bf057aee57
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue Jul 10 10:06:01 2007 -0600

    Change _X_INLINE to just inline - the define probably isn't needed
    for us unless we go to a system that doesn't support it.  We'll cross
    that bridge when we get to it.

commit 47b5a249e7ae877d7816504fec4f987442d07931
Author: Martin-Éric Racine <q-funk@iki.fi>
Date:   Fri Jul 6 16:59:51 2007 -0600

    An improved autogen.sh script

commit f42add8948e2cee3d9f2edf580f260c42718fc0c
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Jul 6 16:13:14 2007 -0600

    Remove the DCON sleep code
    
    The DCON sleep code was introduced by a previous commit - for now that
    will only live in the OLPC tree.

commit bff92101bd22fcb6a5c0e9da9be58105f7655be4
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Jul 6 13:22:02 2007 -0600

    Use the right bit depth when doing EXA copies on the GX.
    
    This fixes the image corruption problem on OLPC.

commit 247faeeb1d1c429800f187e08cfaa31407c660ff
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue Jul 3 15:53:56 2007 -0600

    Make sure we turn on the video palette when video starts, and turn it off
    when video ends.

commit 610f9a6b443afa8e40637a62b2b377a992f5eb05
Author: Dan Williams <dcbw@redhat.com>
Date:   Mon Jun 25 15:30:02 2007 -0400

    Fix LX video downscaling
    
    The GX video downscaling logic apparently isn't appropriate for the LX

commit fd870f7acd4654ea1b440925e78df2afc5bf7259
Author: Adam Jackson <ajax@benzedrine.nwnk.net>
Date:   Mon Jun 25 11:06:39 2007 -0400

    uint32_t -> CARD32

commit 54ac7918b53a999a25185ff140cda001255596b3
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Jun 22 17:09:28 2007 -0600

    Multiple fixes for the LX driver
    
    * Fix VGA detection
    * Restrict EXA implementations older then 2.0
    * Fix crash when VT is switched while rotated
    * Turn the shadow framebuffer into a true exa offscreen component
    * Shut off video when we are rotated
    
    Conflicts:
    
    	src/amd_lx_driver.c
    	src/amd_lx_rotate.c

commit ea11d99bc29086a8fa92c01dd22f195d626b33d2
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Jun 15 18:08:56 2007 -0600

    Two fixes for compositing for Cairo 1.4.4 and X server 1.3+

commit 7bf0627cd001325affbe16118a2f27225179eabd
Author: Zephaniah E. Hull <warp@agamemnon.b5>
Date:   Wed Jun 13 12:28:36 2007 -0400

    From Bernardo Innocenti.
    
    - enable a few GCC warnings
    
    - make a few globals const and static
    
    - move MGP_RASTER_MODE writes before writes to color registers
    
    - compute BPP dynamically in the SolidFill EXA hook
    
    Conflicts:
    
    	configure.ac

commit dc23a3168df78424108e8609b250e88c3dd16775
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Jun 1 18:32:28 2007 -0600

    Fix A8 masks
    
    We were using the wrong operation for A8 masks, resulting in badness.
    Also, clean up the mask blt to be much simpler.

commit 167d9dcfe6c13f37590b26bd544ae225cb7934ac
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Jun 1 09:31:52 2007 -0600

    Use the correct pitch for composite mask operations
    
    We need to specify the correct pitch for composite mask operations - this
    fixes the stride problem.  Also, correctly set up the source color and
    some other minor issues, this helps us pass caps-join in the cairo test
    suite.

commit 802282679447f2be6d815a6aa196d764a33bb07d
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu May 17 17:07:17 2007 -0600

    Swizzle the sync when the panel is enabled to account for Cimarron being
    silly.

commit 0a138f4a36ff2b474705bb542b446fe340be324d
Author: Adam Jackson <ajax@benzedrine.nwnk.net>
Date:   Thu May 31 15:10:59 2007 -0400

    Add DCON detection to LX.

commit 6350e6e2bdc42aa7220d3101111a3bcc0a9b864a
Author: Adam Jackson <ajax@benzedrine.nwnk.net>
Date:   Thu May 31 15:07:29 2007 -0400

    DCON detection cleanup and generification.

commit 506a23c3618905cbcc1c767b9e388ca86706bc73
Author: Adam Jackson <ajax@benzedrine.nwnk.net>
Date:   Thu May 31 14:34:07 2007 -0400

    Un-libcwrap.

commit c37fc13ea909a7a1315d3723ccac0e4146b3a0b2
Author: Adam Jackson <ajax@benzedrine.nwnk.net>
Date:   Thu May 31 14:30:10 2007 -0400

    Add extra GCC warning fu.  -Wall cleanup.

commit 0953a855c7d20186a8efb6db4842eb777f6e0e56
Author: Adam Jackson <ajax@benzedrine.nwnk.net>
Date:   Thu May 31 13:58:59 2007 -0400

    Rename: amd_gx_dcon.c -> amd_dcon.c

commit 0da247099df93a9774e8a638170f2142615ed5df
Author: Adam Jackson <ajax@benzedrine.nwnk.net>
Date:   Wed May 16 13:05:46 2007 -0400

    Remove 'man' directory references from configure.ac.

commit 217eeed3c1659cc9e0f13ba6932d1342c0255df4
Merge: 6d1942f 022a106
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu May 10 10:39:08 2007 -0600

    Merge Geode GX and LX development from OLPC
    
    Conflicts:
    
    	man/amd.man

commit 022a106b38693d2d705e8c15ad84c18832fa2e8c
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed May 9 17:17:25 2007 -0600

    Documentation cleanups
    
    Rework the readme, and delete the now woefully out of date man pages.
    Also update the TODO file with more interesting information.

commit 37719011a020eafc9a6848025f3e07219c2f5444
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed May 9 17:17:16 2007 -0600

    Fix warnings discovered by Dan Williams and -Wall

commit da653c761c9a275cf2b5ff4e087cb0239421c72d
Author: Dan Williams <dcbw@redhat.com>
Date:   Wed May 9 13:32:42 2007 -0600

    More -Wall warnings fixed

commit 8fa5d1e3653f91c0c1409147f7292463554dd9f9
Author: Dan Williams <dcbw@redhat.com>
Date:   Wed May 9 13:31:15 2007 -0600

    Eliminate the first round of warnings discovered with -Wall

commit 0af46deb156c1d4bdc7c3378c70bb9ef696a4886
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri May 4 11:43:09 2007 -0600

    Completely eliminate the rotation pitch
    
    Chris Ball is still getting segfalts - completely eliminate the
    call.

commit c35f7fe15a5a872606f18c84c097f3b5b1cada74
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri May 4 11:30:55 2007 -0600

    Fix a segfault in RandR

commit 1ddbc60536d6e2b7a4654dd9019a3872c1a54de2
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri May 4 09:03:26 2007 -0600

    Use the same stride for all rotations
    
    This avoids problems copying pixmaps from EXA space.

commit 69501cb09955741a3bb93a0992085cf4f64c70d7
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri May 4 09:03:22 2007 -0600

    Cimarron wants to use CF8/CFC
    
    Avoid using the PCI access routines in Cimarron

commit 460c5b55d30086b013e35c76fd406e8826e6a814
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri May 4 08:53:40 2007 -0600

    Handle out of memory situations more gracefully

commit 501f1b6d11ce35d5e53de798a364b7712c754e7b
Author: Dan Williams <dcbw@redhat.com>
Date:   Thu May 3 10:05:17 2007 -0400

    commit 5f7979e990c5eafb44aa0fa9779a7ed3904d25ce
    
        include string.h for memset

commit 89bb73e915a8aca7a04d2ab0818f9b21c88d59c3
Author: Dan Williams <dcbw@redhat.com>
Date:   Thu May 3 09:56:42 2007 -0400

    commit 7125fcab372b24f7045bbdaa6d4f6e435b1f7a83
    
        Fix missed GXQueryImageAttributes->GeodeQueryImageAttributes

commit 4dfae85222779694e162c8bb942b7587c2600592
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed May 2 14:38:24 2007 -0600

    Solve several vexing issues with RandR:
    
    * Incorrect rendering while rotated
    * Mouse was incorrectly drawn for 90 and 270
    * subsequent RandR commands were killing the rotated stride

commit dc5db7c4d68268377cd99f7c8e4bc54556923ed1
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue May 1 17:08:42 2007 -0600

    Fix video and VGA bugs
    
    Fix two small bugs: The VGA dection code wasn't working, and the video
    engine was not using color keying.

commit 59eac173349afa24c126ec670bedb68643dd5a84
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Apr 26 15:34:11 2007 -0600

    Use a secret bit to ensure we use channel A alpha *before* color conversion

commit 46b29acf1f239dd89adabf1cb2c138cf8a2b1700
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Apr 20 11:17:16 2007 -0600

    Several fixes to support OLPC LX turnon
    
    These are fixes discovered during the OLPC LX turn on.  The compression
    was incorrectly being configured, resulting in bad drawing, that has
    bee repaired.  Assume by default that we're going to use a panel and the
    CRT, no longer read the straps MSR because it is unreliable.  Finally,
    fix the MSR hooks by moving the hook definitions where they will do some
    good and disabling the VSA method.

commit 8bfed84a1f972325cdf61876d7f7dfd0e8f0d4d5
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Apr 11 13:37:02 2007 -0600

    Add Linux MSR suport for LX
    
    Extend the GX MSR support to LX - this is to support the VSAless
    OFW, and share code.

commit 2d7689990c19fd74d5fad11bcf6317a7874a6057
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Mar 8 18:06:11 2007 -0700

    Fix a couple of scary bugs - including one that seemed to be causing
    corruption.

commit b959509bb37e6ef269088ecbe92f49c7dc971fb6
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Mar 7 18:27:52 2007 -0700

    Add a TODO file filled with many bugs and enhancements

commit b59bfdde9341ca9014e00795e344ac64b5b91b8c
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Mar 7 18:14:34 2007 -0700

    [MAJOR UPDATE] Geode LX driver
    
    This is a major re-vamping of the Geode LX driver to support EXA, RandR,
    and advanced xserver features.  The GX and LX drivers now share the similar
    streamlined infrastructure, and acceleration.  The LX driver also adds
    features the GX does not have, such as accelerated rotations and
    far better composite support.
    
    This provides the basis for the rotation and acceleration enhancements.

commit 6d1942fb5e9a1e37baae3ec8559f9567ddeb2f67
Author: Alan Coopersmith <alan.coopersmith@sun.com>
Date:   Thu Mar 1 10:38:08 2007 -0800

    Replace references to XFree86/XF86Config in man page

commit d2f53b7c576c91f07f55b62b0020be1d0ab358dc
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Jan 31 13:50:19 2007 -0700

    Fix an unfortunate segfault when NoAccel is selected

commit 610e65d49c3060b9512be785ab78de0824583155
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Mon Jan 15 22:03:00 2007 -0700

    Fixed broken EXA - things actually move faster now.

commit 7f3e76af1675dc071769cdd68fa0ae4f1290b7b4
Author: Dan Williams <dcbw@redhat.com>
Date:   Mon Jan 15 16:49:09 2007 -0500

    Fix distcheck

commit edbd744b31eb7996b521eca4a42e0e20700ffa78
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Jan 12 10:30:19 2007 -0700

    Correctly program the sync polarity taking into account the GX wierdness

commit 461c5fb1ed00101e9832b4a0236bbb51d092ddb6
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Jan 11 17:30:45 2007 -0700

    Broken logic on the previous Xv fix - should work now

commit a212981da0147a5f277b43b801de6d2454005c17
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Jan 10 17:51:23 2007 -0700

    Add Xv hardware support for a RGB565 source.

commit acc4421ac55d021ef917967ecd09b650e8dd9699
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Jan 10 14:23:02 2007 -0700

    Fix a segfault when no valid modes are found
    Also - be smart about allocating memory in the RandR part.

commit 888dab329bb66c8e4317d0b6a9736fa70c9686a6
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Jan 10 14:21:43 2007 -0700

    I missed a few updates of the new driver structure in the video code

commit cb69ce0f54569c68c79173e144c3c90e46e64f8b
Author: Adam Jackson <ajax@benzedrine.nwnk.net>
Date:   Mon Jan 8 15:23:59 2007 -0500

    Minor DCON fixes.
    
    Wire up the DCON init to GXPreInit, and set the panel geometry appropriately
    if found.

commit c4f21aaaaf6d101e7c8828e246e06be3ff0591c3
Author: Adam Jackson <ajax@benzedrine.nwnk.net>
Date:   Mon Jan 8 15:22:28 2007 -0500

    Fix RANDR support to be dlloader-friendly.

commit d4d16bf29802549b501a00e32195162ed5e8ab93
Author: Adam Jackson <ajax@benzedrine.nwnk.net>
Date:   Mon Jan 8 15:21:33 2007 -0500

    Build fix.

commit f762b456b98063860e38e9541f4be2fb1302e3c2
Author: Adam Jackson <ajax@benzedrine.nwnk.net>
Date:   Mon Jan 8 15:20:44 2007 -0500

    Add --enable-visibility.
    
    Allow the driver to be built with the default symbol visbility set to hidden,
    for smaller better code.

commit cf77a1fe9ec232cbb0d99685f34d0acb91ee5d88
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Dec 29 10:58:35 2006 -0700

    Remove direct PCI accesses from Durango
    
    Accessing PCI through X is one thing, accessing it directly is quite
    another.

commit fb92319afde24b91c64314e4f2d8725fa2cd61fe
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Dec 20 17:30:44 2006 -0700

    Replace the VSA MSR interface with something more sane

commit e34f70fc46b36a0ea26636045ce9f9bf24ec89cd
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Mon Dec 18 11:01:34 2006 -0700

    Correctly rotate the HW cursor data so that it matches the rest of the screen

commit 2e558b7cf6c508a1f745d922d911d612eba7d2c4
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Dec 15 16:37:35 2006 -0700

    A few fixes for the panel - the mode should be set correctly now, and
    segfaults have gone away.

commit 243edb93e131734f23d9c5f39f1cd614ecc6a1f8
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Dec 15 13:23:49 2006 -0700

    Remove debugging messages and other cleanups

commit 8cd3fa16e377119452d8575198a7f1f1a77e44fc
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Dec 15 13:23:48 2006 -0700

    Default the GX driver to use EXA for acceleration

commit 04e5aa4e6e9ec4ddc8ebeaf9f7004cb832c194c8
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Dec 15 13:23:48 2006 -0700

    Allow the user to specify an initial rotation

commit dc2244b398d68bb340e97c723615e3b52ecd47ae
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Dec 15 13:23:45 2006 -0700

    Clean up the VGA init

commit 5b66b41b1d91345700e8f18569fa984c6ce53aca
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Dec 15 08:46:42 2006 -0700

    Remove unneeded GX options

commit d901348441642fadbd71ed2e37e74b3b2a7af97c
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Dec 14 17:28:48 2006 -0700

    Fix the memory mapping so its more sane, and disable XAA pixmap caches
    during rotation.

commit 73dc69c6597d5f0f6023c067f7b1c2d7709b604b
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Dec 14 17:26:59 2006 -0700

    PATCH:  Automatically probe to see if VGA exists

commit a38f40687c00f35d2e6529c3cfb894ee29cdea66
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Dec 13 16:03:36 2006 -0700

    Clean up whitespace and other code style issues

commit edd326cc9ba5b9f46ca7a4516806a5b7fd3605f0
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue Dec 12 17:31:48 2006 -0700

    First attempt at adding dynamic rotation (just RandR 1.1 for now)

commit 98aad0c298e59b6336e9219cc37294644d2d9e95
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Nov 9 15:31:07 2006 -0700

    PATCH:  Add special support for the OLPC DCON

commit e18f0a7efe7bbc7655a9fdcd3b74ec8c799a86a2
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Nov 8 16:41:44 2006 -0700

    PATCH:  More gamma fixes
    
    Be smarter about how gamma is saved and restored by checking the bits.

commit 881c2aac50af3265d98daa4be5ccf49cabe2f5d6
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Nov 8 11:24:26 2006 -0700

    PATCH:  Avoid incorrectly killing the gamma RAM when the driver starts up
    
    The Xv driver requires color adjustment by programming the gamma LUT.  The
    driver was incorectly programming the LUT at startup, which is damaging
    for any previous applications that may have graphics gamma information in
    the LUT.  Change only applies the video adjustment when video is enabled.

commit 57921b0fffbd1a4bf36dbef69badb9b71918a3b8
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Mon Oct 16 16:54:15 2006 -0600

    Fixed stupid buglet that I introduced

commit 1c2fdaa4bc0df076f2d15184cfba74b2df82c6e4
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Mon Oct 16 16:27:01 2006 -0600

    Missed a place where I needed to clear the EXA memory

commit 8d9986ffa3d678469901d595c80770696bd866d8
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Wed Oct 11 17:42:30 2006 -0600

    Xv needs to understand how to allocate offscreen code from EXA too
    
    When EXA is enabled, it takes enough of the offscreen memory for itself,
    so that Xv cannot query memory with xf86AllocateOffscreen.

commit 2979196dae5615f2a78ace891d4ad6dd98c8fe6e
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Sep 28 09:09:27 2006 -0600

    Update for 7.2 - fix config.h and other include problems.
    
    This closes bug 8290 by applying the patch from Andres Salomon.

commit 45eeb43888e92e2736d9b678ce6d67fb99449800
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Mon Aug 21 11:24:42 2006 -0600

    PATCH:  Clean ups some of the log messages
    
    Remove the useless DDC probe message and only warn when MSR reads don't
    work.

commit 1665bf4ae01b88bd2d981ebacc306568715ee927
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Mon Aug 21 11:24:41 2006 -0600

    PATCH:  Move the check for EXA version
    
    The check for the EXA version occurs before the EXA_VERSION is defined.
    This results in EXA being permanently turned off.  This makes sure exa.h
    is defined before checking the version.

commit 38f3d21beba13daba4844a129f3c268b5f291fb1
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Tue Aug 15 13:14:01 2006 -0600

    PATCH:  When compression is off, adjust the pitch to be linear, saving memory

commit 9d8d08c6a7449faf9c52d728eeb5793180eaf98e
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Mon Aug 7 17:46:56 2006 -0600

    PATCH:  Fixup Xv
    
    Xv was still stuck in the 6.8.1 days.

commit 4a29b63925ea8ffa4e220925dd8aca280fd887a7
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Aug 4 14:23:52 2006 -0600

    PATCH:  Add specific support for the OLPC dcon panel
    
    The OLPC dcon panel operates differently then the other panels in the
    GX universe.

commit 7a49bf6205d77a22b07c785f2cb589abd8671667
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Aug 4 14:23:40 2006 -0600

    PATCH:  Remove the build files that shouldn't be in the repository

commit d67ec33ef47086469446f0bd692ec15581124424
Author: Zephaniah E. Hull <warp@agamemnon.b5>
Date:   Thu Aug 3 10:41:41 2006 -0400

    Make EXA support on EXA_VERSION_MAJOR >= 2.
    
    Catch the two places where we tried to use EXA stuff when it wasn't available.

commit 3718e9e2639d0f6313c3ec9ab32d277d2224f8cf
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Jul 7 17:18:06 2006 -0600

    PATCH:  Fix some VGA issues
    
    Fix some issues from the recent NoVGA refactoring

commit 726d46c8da96b2a0168b39d36be32467d54a9de3
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Fri Jul 7 13:05:19 2006 -0600

    Update with cleanup and other fixes
    
    Final commit of cleanup fixes prior to pushing

commit c3ab9f1a60afe1f5e86db1cf2635acda14fae2f5
Author: Jordan Crouse <jordan.crouse@amd.com>
Date:   Thu Jul 6 14:56:42 2006 -0600

    Initial commit of the xf86-video-amd tree