Makefile.in revision 05cf1079
1# Makefile.in generated by automake 1.16.1 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2018 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright 2005 Adam Jackson. 18# 19# Permission is hereby granted, free of charge, to any person obtaining a 20# copy of this software and associated documentation files (the "Software"), 21# to deal in the Software without restriction, including without limitation 22# on the rights to use, copy, modify, merge, publish, distribute, sub 23# license, and/or sell copies of the Software, and to permit persons to whom 24# the Software is furnished to do so, subject to the following conditions: 25# 26# The above copyright notice and this permission notice (including the next 27# paragraph) shall be included in all copies or substantial portions of the 28# Software. 29# 30# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 31# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 32# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 33# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER 34# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 35# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 36VPATH = @srcdir@ 37am__is_gnu_make = { \ 38 if test -z '$(MAKELEVEL)'; then \ 39 false; \ 40 elif test -n '$(MAKE_HOST)'; then \ 41 true; \ 42 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 43 true; \ 44 else \ 45 false; \ 46 fi; \ 47} 48am__make_running_with_option = \ 49 case $${target_option-} in \ 50 ?) ;; \ 51 *) echo "am__make_running_with_option: internal error: invalid" \ 52 "target option '$${target_option-}' specified" >&2; \ 53 exit 1;; \ 54 esac; \ 55 has_opt=no; \ 56 sane_makeflags=$$MAKEFLAGS; \ 57 if $(am__is_gnu_make); then \ 58 sane_makeflags=$$MFLAGS; \ 59 else \ 60 case $$MAKEFLAGS in \ 61 *\\[\ \ ]*) \ 62 bs=\\; \ 63 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 64 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 65 esac; \ 66 fi; \ 67 skip_next=no; \ 68 strip_trailopt () \ 69 { \ 70 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 71 }; \ 72 for flg in $$sane_makeflags; do \ 73 test $$skip_next = yes && { skip_next=no; continue; }; \ 74 case $$flg in \ 75 *=*|--*) continue;; \ 76 -*I) strip_trailopt 'I'; skip_next=yes;; \ 77 -*I?*) strip_trailopt 'I';; \ 78 -*O) strip_trailopt 'O'; skip_next=yes;; \ 79 -*O?*) strip_trailopt 'O';; \ 80 -*l) strip_trailopt 'l'; skip_next=yes;; \ 81 -*l?*) strip_trailopt 'l';; \ 82 -[dEDm]) skip_next=yes;; \ 83 -[JT]) skip_next=yes;; \ 84 esac; \ 85 case $$flg in \ 86 *$$target_option*) has_opt=yes; break;; \ 87 esac; \ 88 done; \ 89 test $$has_opt = yes 90am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 91am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 92pkgdatadir = $(datadir)/@PACKAGE@ 93pkgincludedir = $(includedir)/@PACKAGE@ 94pkglibdir = $(libdir)/@PACKAGE@ 95pkglibexecdir = $(libexecdir)/@PACKAGE@ 96am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 97install_sh_DATA = $(install_sh) -c -m 644 98install_sh_PROGRAM = $(install_sh) -c 99install_sh_SCRIPT = $(install_sh) -c 100INSTALL_HEADER = $(INSTALL_DATA) 101transform = $(program_transform_name) 102NORMAL_INSTALL = : 103PRE_INSTALL = : 104POST_INSTALL = : 105NORMAL_UNINSTALL = : 106PRE_UNINSTALL = : 107POST_UNINSTALL = : 108build_triplet = @build@ 109host_triplet = @host@ 110subdir = . 111ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 112am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ 113 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 114 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 115 $(top_srcdir)/configure.ac 116am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 117 $(ACLOCAL_M4) 118DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 119 $(am__configure_deps) $(am__DIST_COMMON) 120am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 121 configure.lineno config.status.lineno 122mkinstalldirs = $(install_sh) -d 123CONFIG_HEADER = config.h 124CONFIG_CLEAN_FILES = 125CONFIG_CLEAN_VPATH_FILES = 126AM_V_P = $(am__v_P_@AM_V@) 127am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 128am__v_P_0 = false 129am__v_P_1 = : 130AM_V_GEN = $(am__v_GEN_@AM_V@) 131am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 132am__v_GEN_0 = @echo " GEN " $@; 133am__v_GEN_1 = 134AM_V_at = $(am__v_at_@AM_V@) 135am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 136am__v_at_0 = @ 137am__v_at_1 = 138SOURCES = 139DIST_SOURCES = 140RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 141 ctags-recursive dvi-recursive html-recursive info-recursive \ 142 install-data-recursive install-dvi-recursive \ 143 install-exec-recursive install-html-recursive \ 144 install-info-recursive install-pdf-recursive \ 145 install-ps-recursive install-recursive installcheck-recursive \ 146 installdirs-recursive pdf-recursive ps-recursive \ 147 tags-recursive uninstall-recursive 148am__can_run_installinfo = \ 149 case $$AM_UPDATE_INFO_DIR in \ 150 n|no|NO) false;; \ 151 *) (install-info --version) >/dev/null 2>&1;; \ 152 esac 153RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 154 distclean-recursive maintainer-clean-recursive 155am__recursive_targets = \ 156 $(RECURSIVE_TARGETS) \ 157 $(RECURSIVE_CLEAN_TARGETS) \ 158 $(am__extra_recursive_targets) 159AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 160 cscope distdir distdir-am dist dist-all distcheck 161am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ 162 $(LISP)config.h.in 163# Read a list of newline-separated strings from the standard input, 164# and print each of them once, without duplicates. Input order is 165# *not* preserved. 166am__uniquify_input = $(AWK) '\ 167 BEGIN { nonempty = 0; } \ 168 { items[$$0] = 1; nonempty = 1; } \ 169 END { if (nonempty) { for (i in items) print i; }; } \ 170' 171# Make sure the list of sources is unique. This is necessary because, 172# e.g., the same source file might be shared among _SOURCES variables 173# for different programs/libraries. 174am__define_uniq_tagged_files = \ 175 list='$(am__tagged_files)'; \ 176 unique=`for i in $$list; do \ 177 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 178 done | $(am__uniquify_input)` 179ETAGS = etags 180CTAGS = ctags 181CSCOPE = cscope 182DIST_SUBDIRS = $(SUBDIRS) 183am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ 184 $(top_srcdir)/build-aux/compile \ 185 $(top_srcdir)/build-aux/config.guess \ 186 $(top_srcdir)/build-aux/config.sub \ 187 $(top_srcdir)/build-aux/install-sh \ 188 $(top_srcdir)/build-aux/ltmain.sh \ 189 $(top_srcdir)/build-aux/missing COPYING ChangeLog INSTALL NEWS \ 190 README TODO build-aux/compile build-aux/config.guess \ 191 build-aux/config.sub build-aux/install-sh build-aux/ltmain.sh \ 192 build-aux/missing 193DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 194distdir = $(PACKAGE)-$(VERSION) 195top_distdir = $(distdir) 196am__remove_distdir = \ 197 if test -d "$(distdir)"; then \ 198 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 199 && rm -rf "$(distdir)" \ 200 || { sleep 5 && rm -rf "$(distdir)"; }; \ 201 else :; fi 202am__post_remove_distdir = $(am__remove_distdir) 203am__relativize = \ 204 dir0=`pwd`; \ 205 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 206 sed_rest='s,^[^/]*/*,,'; \ 207 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 208 sed_butlast='s,/*[^/]*$$,,'; \ 209 while test -n "$$dir1"; do \ 210 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 211 if test "$$first" != "."; then \ 212 if test "$$first" = ".."; then \ 213 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 214 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 215 else \ 216 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 217 if test "$$first2" = "$$first"; then \ 218 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 219 else \ 220 dir2="../$$dir2"; \ 221 fi; \ 222 dir0="$$dir0"/"$$first"; \ 223 fi; \ 224 fi; \ 225 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 226 done; \ 227 reldir="$$dir2" 228DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 229GZIP_ENV = --best 230DIST_TARGETS = dist-bzip2 dist-gzip 231distuninstallcheck_listfiles = find . -type f -print 232am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 233 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 234distcleancheck_listfiles = find . -type f -print 235ACLOCAL = @ACLOCAL@ 236ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 237ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 238AMTAR = @AMTAR@ 239AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 240APP_MAN_DIR = @APP_MAN_DIR@ 241APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 242AR = @AR@ 243AUTOCONF = @AUTOCONF@ 244AUTOHEADER = @AUTOHEADER@ 245AUTOMAKE = @AUTOMAKE@ 246AWK = @AWK@ 247BASE_CFLAGS = @BASE_CFLAGS@ 248CC = @CC@ 249CCDEPMODE = @CCDEPMODE@ 250CFLAGS = @CFLAGS@ 251CHANGELOG_CMD = @CHANGELOG_CMD@ 252CPP = @CPP@ 253CPPFLAGS = @CPPFLAGS@ 254CWARNFLAGS = @CWARNFLAGS@ 255CYGPATH_W = @CYGPATH_W@ 256DEFS = @DEFS@ 257DEPDIR = @DEPDIR@ 258DLLTOOL = @DLLTOOL@ 259DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 260DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 261DSYMUTIL = @DSYMUTIL@ 262DUMPBIN = @DUMPBIN@ 263ECHO_C = @ECHO_C@ 264ECHO_N = @ECHO_N@ 265ECHO_T = @ECHO_T@ 266EGREP = @EGREP@ 267EXEEXT = @EXEEXT@ 268FGREP = @FGREP@ 269FILE_MAN_DIR = @FILE_MAN_DIR@ 270FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 271GREP = @GREP@ 272INSTALL = @INSTALL@ 273INSTALL_CMD = @INSTALL_CMD@ 274INSTALL_DATA = @INSTALL_DATA@ 275INSTALL_PROGRAM = @INSTALL_PROGRAM@ 276INSTALL_SCRIPT = @INSTALL_SCRIPT@ 277INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 278LD = @LD@ 279LDFLAGS = @LDFLAGS@ 280LIBOBJS = @LIBOBJS@ 281LIBS = @LIBS@ 282LIBTOOL = @LIBTOOL@ 283LIB_MAN_DIR = @LIB_MAN_DIR@ 284LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 285LIPO = @LIPO@ 286LN_S = @LN_S@ 287LTLIBOBJS = @LTLIBOBJS@ 288LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 289M32_CFLAGS = @M32_CFLAGS@ 290MAINT = @MAINT@ 291MAKEINFO = @MAKEINFO@ 292MANIFEST_TOOL = @MANIFEST_TOOL@ 293MAN_SUBSTS = @MAN_SUBSTS@ 294MISC_MAN_DIR = @MISC_MAN_DIR@ 295MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 296MKDIR_P = @MKDIR_P@ 297NM = @NM@ 298NMEDIT = @NMEDIT@ 299OBJDUMP = @OBJDUMP@ 300OBJEXT = @OBJEXT@ 301OTOOL = @OTOOL@ 302OTOOL64 = @OTOOL64@ 303PACKAGE = @PACKAGE@ 304PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 305PACKAGE_NAME = @PACKAGE_NAME@ 306PACKAGE_STRING = @PACKAGE_STRING@ 307PACKAGE_TARNAME = @PACKAGE_TARNAME@ 308PACKAGE_URL = @PACKAGE_URL@ 309PACKAGE_VERSION = @PACKAGE_VERSION@ 310PANEL_CPPFLAGS = @PANEL_CPPFLAGS@ 311PATH_SEPARATOR = @PATH_SEPARATOR@ 312PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@ 313PCIACCESS_LIBS = @PCIACCESS_LIBS@ 314PKG_CONFIG = @PKG_CONFIG@ 315PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 316PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 317RANLIB = @RANLIB@ 318SED = @SED@ 319SET_MAKE = @SET_MAKE@ 320SHELL = @SHELL@ 321STRICT_CFLAGS = @STRICT_CFLAGS@ 322STRIP = @STRIP@ 323VERSION = @VERSION@ 324XEXT_CFLAGS = @XEXT_CFLAGS@ 325XEXT_LIBS = @XEXT_LIBS@ 326XORG_CFLAGS = @XORG_CFLAGS@ 327XORG_LIBS = @XORG_LIBS@ 328XORG_MAN_PAGE = @XORG_MAN_PAGE@ 329abs_builddir = @abs_builddir@ 330abs_srcdir = @abs_srcdir@ 331abs_top_builddir = @abs_top_builddir@ 332abs_top_srcdir = @abs_top_srcdir@ 333ac_ct_AR = @ac_ct_AR@ 334ac_ct_CC = @ac_ct_CC@ 335ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 336am__include = @am__include@ 337am__leading_dot = @am__leading_dot@ 338am__quote = @am__quote@ 339am__tar = @am__tar@ 340am__untar = @am__untar@ 341bindir = @bindir@ 342build = @build@ 343build_alias = @build_alias@ 344build_cpu = @build_cpu@ 345build_os = @build_os@ 346build_vendor = @build_vendor@ 347builddir = @builddir@ 348datadir = @datadir@ 349datarootdir = @datarootdir@ 350docdir = @docdir@ 351dvidir = @dvidir@ 352exec_prefix = @exec_prefix@ 353host = @host@ 354host_alias = @host_alias@ 355host_cpu = @host_cpu@ 356host_os = @host_os@ 357host_vendor = @host_vendor@ 358htmldir = @htmldir@ 359includedir = @includedir@ 360infodir = @infodir@ 361install_sh = @install_sh@ 362libdir = @libdir@ 363libexecdir = @libexecdir@ 364localedir = @localedir@ 365localstatedir = @localstatedir@ 366mandir = @mandir@ 367mkdir_p = @mkdir_p@ 368moduledir = @moduledir@ 369oldincludedir = @oldincludedir@ 370pdfdir = @pdfdir@ 371prefix = @prefix@ 372program_transform_name = @program_transform_name@ 373psdir = @psdir@ 374runstatedir = @runstatedir@ 375sbindir = @sbindir@ 376sharedstatedir = @sharedstatedir@ 377srcdir = @srcdir@ 378sysconfdir = @sysconfdir@ 379target_alias = @target_alias@ 380top_build_prefix = @top_build_prefix@ 381top_builddir = @top_builddir@ 382top_srcdir = @top_srcdir@ 383ACLOCAL_AMFLAGS = ${ACLOCAL_FLAGS} -I m4 384SUBDIRS = src 385MAINTAINERCLEANFILES = ChangeLog INSTALL 386EXTRA_DIST = autogen.sh 387all: config.h 388 $(MAKE) $(AM_MAKEFLAGS) all-recursive 389 390.SUFFIXES: 391am--refresh: Makefile 392 @: 393$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) 394 @for dep in $?; do \ 395 case '$(am__configure_deps)' in \ 396 *$$dep*) \ 397 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 398 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 399 && exit 0; \ 400 exit 1;; \ 401 esac; \ 402 done; \ 403 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 404 $(am__cd) $(top_srcdir) && \ 405 $(AUTOMAKE) --foreign Makefile 406Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 407 @case '$?' in \ 408 *config.status*) \ 409 echo ' $(SHELL) ./config.status'; \ 410 $(SHELL) ./config.status;; \ 411 *) \ 412 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ 413 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ 414 esac; 415 416$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 417 $(SHELL) ./config.status --recheck 418 419$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 420 $(am__cd) $(srcdir) && $(AUTOCONF) 421$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) 422 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 423$(am__aclocal_m4_deps): 424 425config.h: stamp-h1 426 @test -f $@ || rm -f stamp-h1 427 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 428 429stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 430 @rm -f stamp-h1 431 cd $(top_builddir) && $(SHELL) ./config.status config.h 432$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 433 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 434 rm -f stamp-h1 435 touch $@ 436 437distclean-hdr: 438 -rm -f config.h stamp-h1 439 440mostlyclean-libtool: 441 -rm -f *.lo 442 443clean-libtool: 444 -rm -rf .libs _libs 445 446distclean-libtool: 447 -rm -f libtool config.lt 448 449# This directory's subdirectories are mostly independent; you can cd 450# into them and run 'make' without going through this Makefile. 451# To change the values of 'make' variables: instead of editing Makefiles, 452# (1) if the variable is set in 'config.status', edit 'config.status' 453# (which will cause the Makefiles to be regenerated when you run 'make'); 454# (2) otherwise, pass the desired values on the 'make' command line. 455$(am__recursive_targets): 456 @fail=; \ 457 if $(am__make_keepgoing); then \ 458 failcom='fail=yes'; \ 459 else \ 460 failcom='exit 1'; \ 461 fi; \ 462 dot_seen=no; \ 463 target=`echo $@ | sed s/-recursive//`; \ 464 case "$@" in \ 465 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 466 *) list='$(SUBDIRS)' ;; \ 467 esac; \ 468 for subdir in $$list; do \ 469 echo "Making $$target in $$subdir"; \ 470 if test "$$subdir" = "."; then \ 471 dot_seen=yes; \ 472 local_target="$$target-am"; \ 473 else \ 474 local_target="$$target"; \ 475 fi; \ 476 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 477 || eval $$failcom; \ 478 done; \ 479 if test "$$dot_seen" = "no"; then \ 480 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 481 fi; test -z "$$fail" 482 483ID: $(am__tagged_files) 484 $(am__define_uniq_tagged_files); mkid -fID $$unique 485tags: tags-recursive 486TAGS: tags 487 488tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 489 set x; \ 490 here=`pwd`; \ 491 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 492 include_option=--etags-include; \ 493 empty_fix=.; \ 494 else \ 495 include_option=--include; \ 496 empty_fix=; \ 497 fi; \ 498 list='$(SUBDIRS)'; for subdir in $$list; do \ 499 if test "$$subdir" = .; then :; else \ 500 test ! -f $$subdir/TAGS || \ 501 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 502 fi; \ 503 done; \ 504 $(am__define_uniq_tagged_files); \ 505 shift; \ 506 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 507 test -n "$$unique" || unique=$$empty_fix; \ 508 if test $$# -gt 0; then \ 509 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 510 "$$@" $$unique; \ 511 else \ 512 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 513 $$unique; \ 514 fi; \ 515 fi 516ctags: ctags-recursive 517 518CTAGS: ctags 519ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 520 $(am__define_uniq_tagged_files); \ 521 test -z "$(CTAGS_ARGS)$$unique" \ 522 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 523 $$unique 524 525GTAGS: 526 here=`$(am__cd) $(top_builddir) && pwd` \ 527 && $(am__cd) $(top_srcdir) \ 528 && gtags -i $(GTAGS_ARGS) "$$here" 529cscope: cscope.files 530 test ! -s cscope.files \ 531 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 532clean-cscope: 533 -rm -f cscope.files 534cscope.files: clean-cscope cscopelist 535cscopelist: cscopelist-recursive 536 537cscopelist-am: $(am__tagged_files) 538 list='$(am__tagged_files)'; \ 539 case "$(srcdir)" in \ 540 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 541 *) sdir=$(subdir)/$(srcdir) ;; \ 542 esac; \ 543 for i in $$list; do \ 544 if test -f "$$i"; then \ 545 echo "$(subdir)/$$i"; \ 546 else \ 547 echo "$$sdir/$$i"; \ 548 fi; \ 549 done >> $(top_builddir)/cscope.files 550 551distclean-tags: 552 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 553 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 554 555distdir: $(BUILT_SOURCES) 556 $(MAKE) $(AM_MAKEFLAGS) distdir-am 557 558distdir-am: $(DISTFILES) 559 $(am__remove_distdir) 560 test -d "$(distdir)" || mkdir "$(distdir)" 561 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 562 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 563 list='$(DISTFILES)'; \ 564 dist_files=`for file in $$list; do echo $$file; done | \ 565 sed -e "s|^$$srcdirstrip/||;t" \ 566 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 567 case $$dist_files in \ 568 */*) $(MKDIR_P) `echo "$$dist_files" | \ 569 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 570 sort -u` ;; \ 571 esac; \ 572 for file in $$dist_files; do \ 573 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 574 if test -d $$d/$$file; then \ 575 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 576 if test -d "$(distdir)/$$file"; then \ 577 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 578 fi; \ 579 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 580 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 581 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 582 fi; \ 583 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 584 else \ 585 test -f "$(distdir)/$$file" \ 586 || cp -p $$d/$$file "$(distdir)/$$file" \ 587 || exit 1; \ 588 fi; \ 589 done 590 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 591 if test "$$subdir" = .; then :; else \ 592 $(am__make_dryrun) \ 593 || test -d "$(distdir)/$$subdir" \ 594 || $(MKDIR_P) "$(distdir)/$$subdir" \ 595 || exit 1; \ 596 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 597 $(am__relativize); \ 598 new_distdir=$$reldir; \ 599 dir1=$$subdir; dir2="$(top_distdir)"; \ 600 $(am__relativize); \ 601 new_top_distdir=$$reldir; \ 602 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 603 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 604 ($(am__cd) $$subdir && \ 605 $(MAKE) $(AM_MAKEFLAGS) \ 606 top_distdir="$$new_top_distdir" \ 607 distdir="$$new_distdir" \ 608 am__remove_distdir=: \ 609 am__skip_length_check=: \ 610 am__skip_mode_fix=: \ 611 distdir) \ 612 || exit 1; \ 613 fi; \ 614 done 615 $(MAKE) $(AM_MAKEFLAGS) \ 616 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 617 dist-hook 618 -test -n "$(am__skip_mode_fix)" \ 619 || find "$(distdir)" -type d ! -perm -755 \ 620 -exec chmod u+rwx,go+rx {} \; -o \ 621 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 622 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 623 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 624 || chmod -R a+r "$(distdir)" 625dist-gzip: distdir 626 tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz 627 $(am__post_remove_distdir) 628dist-bzip2: distdir 629 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 630 $(am__post_remove_distdir) 631 632dist-lzip: distdir 633 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 634 $(am__post_remove_distdir) 635 636dist-xz: distdir 637 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 638 $(am__post_remove_distdir) 639 640dist-tarZ: distdir 641 @echo WARNING: "Support for distribution archives compressed with" \ 642 "legacy program 'compress' is deprecated." >&2 643 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 644 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 645 $(am__post_remove_distdir) 646 647dist-shar: distdir 648 @echo WARNING: "Support for shar distribution archives is" \ 649 "deprecated." >&2 650 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 651 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz 652 $(am__post_remove_distdir) 653 654dist-zip: distdir 655 -rm -f $(distdir).zip 656 zip -rq $(distdir).zip $(distdir) 657 $(am__post_remove_distdir) 658 659dist dist-all: 660 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 661 $(am__post_remove_distdir) 662 663# This target untars the dist file and tries a VPATH configuration. Then 664# it guarantees that the distribution is self-contained by making another 665# tarfile. 666distcheck: dist 667 case '$(DIST_ARCHIVES)' in \ 668 *.tar.gz*) \ 669 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ 670 *.tar.bz2*) \ 671 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 672 *.tar.lz*) \ 673 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 674 *.tar.xz*) \ 675 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 676 *.tar.Z*) \ 677 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 678 *.shar.gz*) \ 679 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ 680 *.zip*) \ 681 unzip $(distdir).zip ;;\ 682 esac 683 chmod -R a-w $(distdir) 684 chmod u+w $(distdir) 685 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 686 chmod a-w $(distdir) 687 test -d $(distdir)/_build || exit 0; \ 688 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 689 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 690 && am__cwd=`pwd` \ 691 && $(am__cd) $(distdir)/_build/sub \ 692 && ../../configure \ 693 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 694 $(DISTCHECK_CONFIGURE_FLAGS) \ 695 --srcdir=../.. --prefix="$$dc_install_base" \ 696 && $(MAKE) $(AM_MAKEFLAGS) \ 697 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 698 && $(MAKE) $(AM_MAKEFLAGS) check \ 699 && $(MAKE) $(AM_MAKEFLAGS) install \ 700 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 701 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 702 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 703 distuninstallcheck \ 704 && chmod -R a-w "$$dc_install_base" \ 705 && ({ \ 706 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 707 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 708 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 709 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 710 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 711 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 712 && rm -rf "$$dc_destdir" \ 713 && $(MAKE) $(AM_MAKEFLAGS) dist \ 714 && rm -rf $(DIST_ARCHIVES) \ 715 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 716 && cd "$$am__cwd" \ 717 || exit 1 718 $(am__post_remove_distdir) 719 @(echo "$(distdir) archives ready for distribution: "; \ 720 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 721 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 722distuninstallcheck: 723 @test -n '$(distuninstallcheck_dir)' || { \ 724 echo 'ERROR: trying to run $@ with an empty' \ 725 '$$(distuninstallcheck_dir)' >&2; \ 726 exit 1; \ 727 }; \ 728 $(am__cd) '$(distuninstallcheck_dir)' || { \ 729 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 730 exit 1; \ 731 }; \ 732 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 733 || { echo "ERROR: files left after uninstall:" ; \ 734 if test -n "$(DESTDIR)"; then \ 735 echo " (check DESTDIR support)"; \ 736 fi ; \ 737 $(distuninstallcheck_listfiles) ; \ 738 exit 1; } >&2 739distcleancheck: distclean 740 @if test '$(srcdir)' = . ; then \ 741 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 742 exit 1 ; \ 743 fi 744 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 745 || { echo "ERROR: files left in build directory after distclean:" ; \ 746 $(distcleancheck_listfiles) ; \ 747 exit 1; } >&2 748check-am: all-am 749check: check-recursive 750all-am: Makefile config.h 751installdirs: installdirs-recursive 752installdirs-am: 753install: install-recursive 754install-exec: install-exec-recursive 755install-data: install-data-recursive 756uninstall: uninstall-recursive 757 758install-am: all-am 759 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 760 761installcheck: installcheck-recursive 762install-strip: 763 if test -z '$(STRIP)'; then \ 764 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 765 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 766 install; \ 767 else \ 768 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 769 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 770 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 771 fi 772mostlyclean-generic: 773 774clean-generic: 775 776distclean-generic: 777 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 778 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 779 780maintainer-clean-generic: 781 @echo "This command is intended for maintainers to use" 782 @echo "it deletes files that may require special tools to rebuild." 783 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 784clean: clean-recursive 785 786clean-am: clean-generic clean-libtool mostlyclean-am 787 788distclean: distclean-recursive 789 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 790 -rm -f Makefile 791distclean-am: clean-am distclean-generic distclean-hdr \ 792 distclean-libtool distclean-tags 793 794dvi: dvi-recursive 795 796dvi-am: 797 798html: html-recursive 799 800html-am: 801 802info: info-recursive 803 804info-am: 805 806install-data-am: 807 808install-dvi: install-dvi-recursive 809 810install-dvi-am: 811 812install-exec-am: 813 814install-html: install-html-recursive 815 816install-html-am: 817 818install-info: install-info-recursive 819 820install-info-am: 821 822install-man: 823 824install-pdf: install-pdf-recursive 825 826install-pdf-am: 827 828install-ps: install-ps-recursive 829 830install-ps-am: 831 832installcheck-am: 833 834maintainer-clean: maintainer-clean-recursive 835 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 836 -rm -rf $(top_srcdir)/autom4te.cache 837 -rm -f Makefile 838maintainer-clean-am: distclean-am maintainer-clean-generic 839 840mostlyclean: mostlyclean-recursive 841 842mostlyclean-am: mostlyclean-generic mostlyclean-libtool 843 844pdf: pdf-recursive 845 846pdf-am: 847 848ps: ps-recursive 849 850ps-am: 851 852uninstall-am: 853 854.MAKE: $(am__recursive_targets) all install-am install-strip 855 856.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 857 am--refresh check check-am clean clean-cscope clean-generic \ 858 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 859 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ 860 dist-tarZ dist-xz dist-zip distcheck distclean \ 861 distclean-generic distclean-hdr distclean-libtool \ 862 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 863 dvi-am html html-am info info-am install install-am \ 864 install-data install-data-am install-dvi install-dvi-am \ 865 install-exec install-exec-am install-html install-html-am \ 866 install-info install-info-am install-man install-pdf \ 867 install-pdf-am install-ps install-ps-am install-strip \ 868 installcheck installcheck-am installdirs installdirs-am \ 869 maintainer-clean maintainer-clean-generic mostlyclean \ 870 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ 871 tags tags-am uninstall uninstall-am 872 873.PRECIOUS: Makefile 874 875 876.PHONY: ChangeLog INSTALL 877 878INSTALL: 879 $(INSTALL_CMD) 880 881ChangeLog: 882 $(CHANGELOG_CMD) 883 884dist-hook: ChangeLog INSTALL 885 886# Tell versions [3.59,3.63) of GNU make to not export all variables. 887# Otherwise a system limit (for SysV at least) may be exceeded. 888.NOEXPORT: 889