Makefile.in revision 4a8d91dc
1# Makefile.in generated by automake 1.15 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2014 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright 2005 Adam Jackson. 18# 19# Permission is hereby granted, free of charge, to any person obtaining a 20# copy of this software and associated documentation files (the "Software"), 21# to deal in the Software without restriction, including without limitation 22# on the rights to use, copy, modify, merge, publish, distribute, sub 23# license, and/or sell copies of the Software, and to permit persons to whom 24# the Software is furnished to do so, subject to the following conditions: 25# 26# The above copyright notice and this permission notice (including the next 27# paragraph) shall be included in all copies or substantial portions of the 28# Software. 29# 30# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 31# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 32# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 33# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER 34# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 35# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 36VPATH = @srcdir@ 37am__is_gnu_make = { \ 38 if test -z '$(MAKELEVEL)'; then \ 39 false; \ 40 elif test -n '$(MAKE_HOST)'; then \ 41 true; \ 42 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 43 true; \ 44 else \ 45 false; \ 46 fi; \ 47} 48am__make_running_with_option = \ 49 case $${target_option-} in \ 50 ?) ;; \ 51 *) echo "am__make_running_with_option: internal error: invalid" \ 52 "target option '$${target_option-}' specified" >&2; \ 53 exit 1;; \ 54 esac; \ 55 has_opt=no; \ 56 sane_makeflags=$$MAKEFLAGS; \ 57 if $(am__is_gnu_make); then \ 58 sane_makeflags=$$MFLAGS; \ 59 else \ 60 case $$MAKEFLAGS in \ 61 *\\[\ \ ]*) \ 62 bs=\\; \ 63 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 64 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 65 esac; \ 66 fi; \ 67 skip_next=no; \ 68 strip_trailopt () \ 69 { \ 70 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 71 }; \ 72 for flg in $$sane_makeflags; do \ 73 test $$skip_next = yes && { skip_next=no; continue; }; \ 74 case $$flg in \ 75 *=*|--*) continue;; \ 76 -*I) strip_trailopt 'I'; skip_next=yes;; \ 77 -*I?*) strip_trailopt 'I';; \ 78 -*O) strip_trailopt 'O'; skip_next=yes;; \ 79 -*O?*) strip_trailopt 'O';; \ 80 -*l) strip_trailopt 'l'; skip_next=yes;; \ 81 -*l?*) strip_trailopt 'l';; \ 82 -[dEDm]) skip_next=yes;; \ 83 -[JT]) skip_next=yes;; \ 84 esac; \ 85 case $$flg in \ 86 *$$target_option*) has_opt=yes; break;; \ 87 esac; \ 88 done; \ 89 test $$has_opt = yes 90am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 91am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 92pkgdatadir = $(datadir)/@PACKAGE@ 93pkgincludedir = $(includedir)/@PACKAGE@ 94pkglibdir = $(libdir)/@PACKAGE@ 95pkglibexecdir = $(libexecdir)/@PACKAGE@ 96am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 97install_sh_DATA = $(install_sh) -c -m 644 98install_sh_PROGRAM = $(install_sh) -c 99install_sh_SCRIPT = $(install_sh) -c 100INSTALL_HEADER = $(INSTALL_DATA) 101transform = $(program_transform_name) 102NORMAL_INSTALL = : 103PRE_INSTALL = : 104POST_INSTALL = : 105NORMAL_UNINSTALL = : 106PRE_UNINSTALL = : 107POST_UNINSTALL = : 108build_triplet = @build@ 109host_triplet = @host@ 110subdir = . 111ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 112am__aclocal_m4_deps = $(top_srcdir)/configure.ac 113am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 114 $(ACLOCAL_M4) 115DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 116 $(am__configure_deps) $(am__DIST_COMMON) 117am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 118 configure.lineno config.status.lineno 119mkinstalldirs = $(install_sh) -d 120CONFIG_HEADER = config.h 121CONFIG_CLEAN_FILES = 122CONFIG_CLEAN_VPATH_FILES = 123AM_V_P = $(am__v_P_@AM_V@) 124am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 125am__v_P_0 = false 126am__v_P_1 = : 127AM_V_GEN = $(am__v_GEN_@AM_V@) 128am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 129am__v_GEN_0 = @echo " GEN " $@; 130am__v_GEN_1 = 131AM_V_at = $(am__v_at_@AM_V@) 132am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 133am__v_at_0 = @ 134am__v_at_1 = 135SOURCES = 136DIST_SOURCES = 137RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 138 ctags-recursive dvi-recursive html-recursive info-recursive \ 139 install-data-recursive install-dvi-recursive \ 140 install-exec-recursive install-html-recursive \ 141 install-info-recursive install-pdf-recursive \ 142 install-ps-recursive install-recursive installcheck-recursive \ 143 installdirs-recursive pdf-recursive ps-recursive \ 144 tags-recursive uninstall-recursive 145am__can_run_installinfo = \ 146 case $$AM_UPDATE_INFO_DIR in \ 147 n|no|NO) false;; \ 148 *) (install-info --version) >/dev/null 2>&1;; \ 149 esac 150RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 151 distclean-recursive maintainer-clean-recursive 152am__recursive_targets = \ 153 $(RECURSIVE_TARGETS) \ 154 $(RECURSIVE_CLEAN_TARGETS) \ 155 $(am__extra_recursive_targets) 156AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 157 cscope distdir dist dist-all distcheck 158am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ 159 $(LISP)config.h.in 160# Read a list of newline-separated strings from the standard input, 161# and print each of them once, without duplicates. Input order is 162# *not* preserved. 163am__uniquify_input = $(AWK) '\ 164 BEGIN { nonempty = 0; } \ 165 { items[$$0] = 1; nonempty = 1; } \ 166 END { if (nonempty) { for (i in items) print i; }; } \ 167' 168# Make sure the list of sources is unique. This is necessary because, 169# e.g., the same source file might be shared among _SOURCES variables 170# for different programs/libraries. 171am__define_uniq_tagged_files = \ 172 list='$(am__tagged_files)'; \ 173 unique=`for i in $$list; do \ 174 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 175 done | $(am__uniquify_input)` 176ETAGS = etags 177CTAGS = ctags 178CSCOPE = cscope 179DIST_SUBDIRS = $(SUBDIRS) 180am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \ 181 ChangeLog INSTALL README compile config.guess config.sub \ 182 install-sh ltmain.sh missing 183DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 184distdir = $(PACKAGE)-$(VERSION) 185top_distdir = $(distdir) 186am__remove_distdir = \ 187 if test -d "$(distdir)"; then \ 188 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 189 && rm -rf "$(distdir)" \ 190 || { sleep 5 && rm -rf "$(distdir)"; }; \ 191 else :; fi 192am__post_remove_distdir = $(am__remove_distdir) 193am__relativize = \ 194 dir0=`pwd`; \ 195 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 196 sed_rest='s,^[^/]*/*,,'; \ 197 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 198 sed_butlast='s,/*[^/]*$$,,'; \ 199 while test -n "$$dir1"; do \ 200 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 201 if test "$$first" != "."; then \ 202 if test "$$first" = ".."; then \ 203 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 204 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 205 else \ 206 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 207 if test "$$first2" = "$$first"; then \ 208 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 209 else \ 210 dir2="../$$dir2"; \ 211 fi; \ 212 dir0="$$dir0"/"$$first"; \ 213 fi; \ 214 fi; \ 215 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 216 done; \ 217 reldir="$$dir2" 218DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 219GZIP_ENV = --best 220DIST_TARGETS = dist-bzip2 dist-gzip 221distuninstallcheck_listfiles = find . -type f -print 222am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 223 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 224distcleancheck_listfiles = find . -type f -print 225ACLOCAL = @ACLOCAL@ 226ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 227ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 228AMTAR = @AMTAR@ 229AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 230APP_MAN_DIR = @APP_MAN_DIR@ 231APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 232AR = @AR@ 233AUTOCONF = @AUTOCONF@ 234AUTOHEADER = @AUTOHEADER@ 235AUTOMAKE = @AUTOMAKE@ 236AWK = @AWK@ 237BASE_CFLAGS = @BASE_CFLAGS@ 238CC = @CC@ 239CCDEPMODE = @CCDEPMODE@ 240CFLAGS = @CFLAGS@ 241CHANGELOG_CMD = @CHANGELOG_CMD@ 242CPP = @CPP@ 243CPPFLAGS = @CPPFLAGS@ 244CWARNFLAGS = @CWARNFLAGS@ 245CYGPATH_W = @CYGPATH_W@ 246DEFS = @DEFS@ 247DEPDIR = @DEPDIR@ 248DLLTOOL = @DLLTOOL@ 249DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 250DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 251DRIVER_NAME = @DRIVER_NAME@ 252DSYMUTIL = @DSYMUTIL@ 253DUMPBIN = @DUMPBIN@ 254ECHO_C = @ECHO_C@ 255ECHO_N = @ECHO_N@ 256ECHO_T = @ECHO_T@ 257EGREP = @EGREP@ 258EXEEXT = @EXEEXT@ 259FGREP = @FGREP@ 260FILE_MAN_DIR = @FILE_MAN_DIR@ 261FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 262GREP = @GREP@ 263INSTALL = @INSTALL@ 264INSTALL_CMD = @INSTALL_CMD@ 265INSTALL_DATA = @INSTALL_DATA@ 266INSTALL_PROGRAM = @INSTALL_PROGRAM@ 267INSTALL_SCRIPT = @INSTALL_SCRIPT@ 268INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 269LD = @LD@ 270LDFLAGS = @LDFLAGS@ 271LIBOBJS = @LIBOBJS@ 272LIBS = @LIBS@ 273LIBTOOL = @LIBTOOL@ 274LIB_MAN_DIR = @LIB_MAN_DIR@ 275LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 276LIPO = @LIPO@ 277LN_S = @LN_S@ 278LTLIBOBJS = @LTLIBOBJS@ 279LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 280MAINT = @MAINT@ 281MAKEINFO = @MAKEINFO@ 282MANIFEST_TOOL = @MANIFEST_TOOL@ 283MAN_SUBSTS = @MAN_SUBSTS@ 284MISC_MAN_DIR = @MISC_MAN_DIR@ 285MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 286MKDIR_P = @MKDIR_P@ 287NM = @NM@ 288NMEDIT = @NMEDIT@ 289OBJDUMP = @OBJDUMP@ 290OBJEXT = @OBJEXT@ 291OTOOL = @OTOOL@ 292OTOOL64 = @OTOOL64@ 293PACKAGE = @PACKAGE@ 294PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 295PACKAGE_NAME = @PACKAGE_NAME@ 296PACKAGE_STRING = @PACKAGE_STRING@ 297PACKAGE_TARNAME = @PACKAGE_TARNAME@ 298PACKAGE_URL = @PACKAGE_URL@ 299PACKAGE_VERSION = @PACKAGE_VERSION@ 300PATH_SEPARATOR = @PATH_SEPARATOR@ 301PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@ 302PCIACCESS_LIBS = @PCIACCESS_LIBS@ 303PKG_CONFIG = @PKG_CONFIG@ 304PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 305PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 306RANLIB = @RANLIB@ 307SED = @SED@ 308SET_MAKE = @SET_MAKE@ 309SHELL = @SHELL@ 310STRICT_CFLAGS = @STRICT_CFLAGS@ 311STRIP = @STRIP@ 312VERSION = @VERSION@ 313XORG_CFLAGS = @XORG_CFLAGS@ 314XORG_LIBS = @XORG_LIBS@ 315XORG_MAN_PAGE = @XORG_MAN_PAGE@ 316abs_builddir = @abs_builddir@ 317abs_srcdir = @abs_srcdir@ 318abs_top_builddir = @abs_top_builddir@ 319abs_top_srcdir = @abs_top_srcdir@ 320ac_ct_AR = @ac_ct_AR@ 321ac_ct_CC = @ac_ct_CC@ 322ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 323am__include = @am__include@ 324am__leading_dot = @am__leading_dot@ 325am__quote = @am__quote@ 326am__tar = @am__tar@ 327am__untar = @am__untar@ 328bindir = @bindir@ 329build = @build@ 330build_alias = @build_alias@ 331build_cpu = @build_cpu@ 332build_os = @build_os@ 333build_vendor = @build_vendor@ 334builddir = @builddir@ 335datadir = @datadir@ 336datarootdir = @datarootdir@ 337docdir = @docdir@ 338dvidir = @dvidir@ 339exec_prefix = @exec_prefix@ 340host = @host@ 341host_alias = @host_alias@ 342host_cpu = @host_cpu@ 343host_os = @host_os@ 344host_vendor = @host_vendor@ 345htmldir = @htmldir@ 346includedir = @includedir@ 347infodir = @infodir@ 348install_sh = @install_sh@ 349libdir = @libdir@ 350libexecdir = @libexecdir@ 351localedir = @localedir@ 352localstatedir = @localstatedir@ 353mandir = @mandir@ 354mkdir_p = @mkdir_p@ 355moduledir = @moduledir@ 356oldincludedir = @oldincludedir@ 357pdfdir = @pdfdir@ 358prefix = @prefix@ 359program_transform_name = @program_transform_name@ 360psdir = @psdir@ 361runstatedir = @runstatedir@ 362sbindir = @sbindir@ 363sharedstatedir = @sharedstatedir@ 364srcdir = @srcdir@ 365sysconfdir = @sysconfdir@ 366target_alias = @target_alias@ 367top_build_prefix = @top_build_prefix@ 368top_builddir = @top_builddir@ 369top_srcdir = @top_srcdir@ 370SUBDIRS = src man 371MAINTAINERCLEANFILES = ChangeLog INSTALL 372all: config.h 373 $(MAKE) $(AM_MAKEFLAGS) all-recursive 374 375.SUFFIXES: 376am--refresh: Makefile 377 @: 378$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) 379 @for dep in $?; do \ 380 case '$(am__configure_deps)' in \ 381 *$$dep*) \ 382 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 383 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 384 && exit 0; \ 385 exit 1;; \ 386 esac; \ 387 done; \ 388 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 389 $(am__cd) $(top_srcdir) && \ 390 $(AUTOMAKE) --foreign Makefile 391Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 392 @case '$?' in \ 393 *config.status*) \ 394 echo ' $(SHELL) ./config.status'; \ 395 $(SHELL) ./config.status;; \ 396 *) \ 397 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 398 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 399 esac; 400 401$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 402 $(SHELL) ./config.status --recheck 403 404$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 405 $(am__cd) $(srcdir) && $(AUTOCONF) 406$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) 407 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 408$(am__aclocal_m4_deps): 409 410config.h: stamp-h1 411 @test -f $@ || rm -f stamp-h1 412 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 413 414stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 415 @rm -f stamp-h1 416 cd $(top_builddir) && $(SHELL) ./config.status config.h 417$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 418 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 419 rm -f stamp-h1 420 touch $@ 421 422distclean-hdr: 423 -rm -f config.h stamp-h1 424 425mostlyclean-libtool: 426 -rm -f *.lo 427 428clean-libtool: 429 -rm -rf .libs _libs 430 431distclean-libtool: 432 -rm -f libtool config.lt 433 434# This directory's subdirectories are mostly independent; you can cd 435# into them and run 'make' without going through this Makefile. 436# To change the values of 'make' variables: instead of editing Makefiles, 437# (1) if the variable is set in 'config.status', edit 'config.status' 438# (which will cause the Makefiles to be regenerated when you run 'make'); 439# (2) otherwise, pass the desired values on the 'make' command line. 440$(am__recursive_targets): 441 @fail=; \ 442 if $(am__make_keepgoing); then \ 443 failcom='fail=yes'; \ 444 else \ 445 failcom='exit 1'; \ 446 fi; \ 447 dot_seen=no; \ 448 target=`echo $@ | sed s/-recursive//`; \ 449 case "$@" in \ 450 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 451 *) list='$(SUBDIRS)' ;; \ 452 esac; \ 453 for subdir in $$list; do \ 454 echo "Making $$target in $$subdir"; \ 455 if test "$$subdir" = "."; then \ 456 dot_seen=yes; \ 457 local_target="$$target-am"; \ 458 else \ 459 local_target="$$target"; \ 460 fi; \ 461 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 462 || eval $$failcom; \ 463 done; \ 464 if test "$$dot_seen" = "no"; then \ 465 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 466 fi; test -z "$$fail" 467 468ID: $(am__tagged_files) 469 $(am__define_uniq_tagged_files); mkid -fID $$unique 470tags: tags-recursive 471TAGS: tags 472 473tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 474 set x; \ 475 here=`pwd`; \ 476 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 477 include_option=--etags-include; \ 478 empty_fix=.; \ 479 else \ 480 include_option=--include; \ 481 empty_fix=; \ 482 fi; \ 483 list='$(SUBDIRS)'; for subdir in $$list; do \ 484 if test "$$subdir" = .; then :; else \ 485 test ! -f $$subdir/TAGS || \ 486 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 487 fi; \ 488 done; \ 489 $(am__define_uniq_tagged_files); \ 490 shift; \ 491 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 492 test -n "$$unique" || unique=$$empty_fix; \ 493 if test $$# -gt 0; then \ 494 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 495 "$$@" $$unique; \ 496 else \ 497 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 498 $$unique; \ 499 fi; \ 500 fi 501ctags: ctags-recursive 502 503CTAGS: ctags 504ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 505 $(am__define_uniq_tagged_files); \ 506 test -z "$(CTAGS_ARGS)$$unique" \ 507 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 508 $$unique 509 510GTAGS: 511 here=`$(am__cd) $(top_builddir) && pwd` \ 512 && $(am__cd) $(top_srcdir) \ 513 && gtags -i $(GTAGS_ARGS) "$$here" 514cscope: cscope.files 515 test ! -s cscope.files \ 516 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 517clean-cscope: 518 -rm -f cscope.files 519cscope.files: clean-cscope cscopelist 520cscopelist: cscopelist-recursive 521 522cscopelist-am: $(am__tagged_files) 523 list='$(am__tagged_files)'; \ 524 case "$(srcdir)" in \ 525 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 526 *) sdir=$(subdir)/$(srcdir) ;; \ 527 esac; \ 528 for i in $$list; do \ 529 if test -f "$$i"; then \ 530 echo "$(subdir)/$$i"; \ 531 else \ 532 echo "$$sdir/$$i"; \ 533 fi; \ 534 done >> $(top_builddir)/cscope.files 535 536distclean-tags: 537 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 538 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 539 540distdir: $(DISTFILES) 541 $(am__remove_distdir) 542 test -d "$(distdir)" || mkdir "$(distdir)" 543 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 544 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 545 list='$(DISTFILES)'; \ 546 dist_files=`for file in $$list; do echo $$file; done | \ 547 sed -e "s|^$$srcdirstrip/||;t" \ 548 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 549 case $$dist_files in \ 550 */*) $(MKDIR_P) `echo "$$dist_files" | \ 551 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 552 sort -u` ;; \ 553 esac; \ 554 for file in $$dist_files; do \ 555 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 556 if test -d $$d/$$file; then \ 557 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 558 if test -d "$(distdir)/$$file"; then \ 559 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 560 fi; \ 561 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 562 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 563 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 564 fi; \ 565 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 566 else \ 567 test -f "$(distdir)/$$file" \ 568 || cp -p $$d/$$file "$(distdir)/$$file" \ 569 || exit 1; \ 570 fi; \ 571 done 572 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 573 if test "$$subdir" = .; then :; else \ 574 $(am__make_dryrun) \ 575 || test -d "$(distdir)/$$subdir" \ 576 || $(MKDIR_P) "$(distdir)/$$subdir" \ 577 || exit 1; \ 578 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 579 $(am__relativize); \ 580 new_distdir=$$reldir; \ 581 dir1=$$subdir; dir2="$(top_distdir)"; \ 582 $(am__relativize); \ 583 new_top_distdir=$$reldir; \ 584 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 585 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 586 ($(am__cd) $$subdir && \ 587 $(MAKE) $(AM_MAKEFLAGS) \ 588 top_distdir="$$new_top_distdir" \ 589 distdir="$$new_distdir" \ 590 am__remove_distdir=: \ 591 am__skip_length_check=: \ 592 am__skip_mode_fix=: \ 593 distdir) \ 594 || exit 1; \ 595 fi; \ 596 done 597 $(MAKE) $(AM_MAKEFLAGS) \ 598 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 599 dist-hook 600 -test -n "$(am__skip_mode_fix)" \ 601 || find "$(distdir)" -type d ! -perm -755 \ 602 -exec chmod u+rwx,go+rx {} \; -o \ 603 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 604 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 605 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 606 || chmod -R a+r "$(distdir)" 607dist-gzip: distdir 608 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 609 $(am__post_remove_distdir) 610dist-bzip2: distdir 611 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 612 $(am__post_remove_distdir) 613 614dist-lzip: distdir 615 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 616 $(am__post_remove_distdir) 617 618dist-xz: distdir 619 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 620 $(am__post_remove_distdir) 621 622dist-tarZ: distdir 623 @echo WARNING: "Support for distribution archives compressed with" \ 624 "legacy program 'compress' is deprecated." >&2 625 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 626 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 627 $(am__post_remove_distdir) 628 629dist-shar: distdir 630 @echo WARNING: "Support for shar distribution archives is" \ 631 "deprecated." >&2 632 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 633 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 634 $(am__post_remove_distdir) 635 636dist-zip: distdir 637 -rm -f $(distdir).zip 638 zip -rq $(distdir).zip $(distdir) 639 $(am__post_remove_distdir) 640 641dist dist-all: 642 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 643 $(am__post_remove_distdir) 644 645# This target untars the dist file and tries a VPATH configuration. Then 646# it guarantees that the distribution is self-contained by making another 647# tarfile. 648distcheck: dist 649 case '$(DIST_ARCHIVES)' in \ 650 *.tar.gz*) \ 651 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ 652 *.tar.bz2*) \ 653 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 654 *.tar.lz*) \ 655 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 656 *.tar.xz*) \ 657 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 658 *.tar.Z*) \ 659 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 660 *.shar.gz*) \ 661 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ 662 *.zip*) \ 663 unzip $(distdir).zip ;;\ 664 esac 665 chmod -R a-w $(distdir) 666 chmod u+w $(distdir) 667 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 668 chmod a-w $(distdir) 669 test -d $(distdir)/_build || exit 0; \ 670 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 671 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 672 && am__cwd=`pwd` \ 673 && $(am__cd) $(distdir)/_build/sub \ 674 && ../../configure \ 675 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 676 $(DISTCHECK_CONFIGURE_FLAGS) \ 677 --srcdir=../.. --prefix="$$dc_install_base" \ 678 && $(MAKE) $(AM_MAKEFLAGS) \ 679 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 680 && $(MAKE) $(AM_MAKEFLAGS) check \ 681 && $(MAKE) $(AM_MAKEFLAGS) install \ 682 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 683 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 684 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 685 distuninstallcheck \ 686 && chmod -R a-w "$$dc_install_base" \ 687 && ({ \ 688 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 689 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 690 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 691 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 692 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 693 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 694 && rm -rf "$$dc_destdir" \ 695 && $(MAKE) $(AM_MAKEFLAGS) dist \ 696 && rm -rf $(DIST_ARCHIVES) \ 697 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 698 && cd "$$am__cwd" \ 699 || exit 1 700 $(am__post_remove_distdir) 701 @(echo "$(distdir) archives ready for distribution: "; \ 702 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 703 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 704distuninstallcheck: 705 @test -n '$(distuninstallcheck_dir)' || { \ 706 echo 'ERROR: trying to run $@ with an empty' \ 707 '$$(distuninstallcheck_dir)' >&2; \ 708 exit 1; \ 709 }; \ 710 $(am__cd) '$(distuninstallcheck_dir)' || { \ 711 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 712 exit 1; \ 713 }; \ 714 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 715 || { echo "ERROR: files left after uninstall:" ; \ 716 if test -n "$(DESTDIR)"; then \ 717 echo " (check DESTDIR support)"; \ 718 fi ; \ 719 $(distuninstallcheck_listfiles) ; \ 720 exit 1; } >&2 721distcleancheck: distclean 722 @if test '$(srcdir)' = . ; then \ 723 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 724 exit 1 ; \ 725 fi 726 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 727 || { echo "ERROR: files left in build directory after distclean:" ; \ 728 $(distcleancheck_listfiles) ; \ 729 exit 1; } >&2 730check-am: all-am 731check: check-recursive 732all-am: Makefile config.h 733installdirs: installdirs-recursive 734installdirs-am: 735install: install-recursive 736install-exec: install-exec-recursive 737install-data: install-data-recursive 738uninstall: uninstall-recursive 739 740install-am: all-am 741 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 742 743installcheck: installcheck-recursive 744install-strip: 745 if test -z '$(STRIP)'; then \ 746 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 747 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 748 install; \ 749 else \ 750 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 751 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 752 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 753 fi 754mostlyclean-generic: 755 756clean-generic: 757 758distclean-generic: 759 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 760 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 761 762maintainer-clean-generic: 763 @echo "This command is intended for maintainers to use" 764 @echo "it deletes files that may require special tools to rebuild." 765 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 766clean: clean-recursive 767 768clean-am: clean-generic clean-libtool mostlyclean-am 769 770distclean: distclean-recursive 771 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 772 -rm -f Makefile 773distclean-am: clean-am distclean-generic distclean-hdr \ 774 distclean-libtool distclean-tags 775 776dvi: dvi-recursive 777 778dvi-am: 779 780html: html-recursive 781 782html-am: 783 784info: info-recursive 785 786info-am: 787 788install-data-am: 789 790install-dvi: install-dvi-recursive 791 792install-dvi-am: 793 794install-exec-am: 795 796install-html: install-html-recursive 797 798install-html-am: 799 800install-info: install-info-recursive 801 802install-info-am: 803 804install-man: 805 806install-pdf: install-pdf-recursive 807 808install-pdf-am: 809 810install-ps: install-ps-recursive 811 812install-ps-am: 813 814installcheck-am: 815 816maintainer-clean: maintainer-clean-recursive 817 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 818 -rm -rf $(top_srcdir)/autom4te.cache 819 -rm -f Makefile 820maintainer-clean-am: distclean-am maintainer-clean-generic 821 822mostlyclean: mostlyclean-recursive 823 824mostlyclean-am: mostlyclean-generic mostlyclean-libtool 825 826pdf: pdf-recursive 827 828pdf-am: 829 830ps: ps-recursive 831 832ps-am: 833 834uninstall-am: 835 836.MAKE: $(am__recursive_targets) all install-am install-strip 837 838.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 839 am--refresh check check-am clean clean-cscope clean-generic \ 840 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 841 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ 842 dist-tarZ dist-xz dist-zip distcheck distclean \ 843 distclean-generic distclean-hdr distclean-libtool \ 844 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 845 dvi-am html html-am info info-am install install-am \ 846 install-data install-data-am install-dvi install-dvi-am \ 847 install-exec install-exec-am install-html install-html-am \ 848 install-info install-info-am install-man install-pdf \ 849 install-pdf-am install-ps install-ps-am install-strip \ 850 installcheck installcheck-am installdirs installdirs-am \ 851 maintainer-clean maintainer-clean-generic mostlyclean \ 852 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ 853 tags tags-am uninstall uninstall-am 854 855.PRECIOUS: Makefile 856 857 858.PHONY: ChangeLog INSTALL 859 860INSTALL: 861 $(INSTALL_CMD) 862 863ChangeLog: 864 $(CHANGELOG_CMD) 865 866dist-hook: ChangeLog INSTALL 867 868# Tell versions [3.59,3.63) of GNU make to not export all variables. 869# Otherwise a system limit (for SysV at least) may be exceeded. 870.NOEXPORT: 871