Makefile.in revision 03b705cf
1# Makefile.in generated by automake 1.13.3 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2013 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright 2005 Adam Jackson. 18# 19# Permission is hereby granted, free of charge, to any person obtaining a 20# copy of this software and associated documentation files (the "Software"), 21# to deal in the Software without restriction, including without limitation 22# on the rights to use, copy, modify, merge, publish, distribute, sub 23# license, and/or sell copies of the Software, and to permit persons to whom 24# the Software is furnished to do so, subject to the following conditions: 25# 26# The above copyright notice and this permission notice (including the next 27# paragraph) shall be included in all copies or substantial portions of the 28# Software. 29# 30# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 31# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 32# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 33# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER 34# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 35# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 36VPATH = @srcdir@ 37am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' 38am__make_running_with_option = \ 39 case $${target_option-} in \ 40 ?) ;; \ 41 *) echo "am__make_running_with_option: internal error: invalid" \ 42 "target option '$${target_option-}' specified" >&2; \ 43 exit 1;; \ 44 esac; \ 45 has_opt=no; \ 46 sane_makeflags=$$MAKEFLAGS; \ 47 if $(am__is_gnu_make); then \ 48 sane_makeflags=$$MFLAGS; \ 49 else \ 50 case $$MAKEFLAGS in \ 51 *\\[\ \ ]*) \ 52 bs=\\; \ 53 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 54 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 55 esac; \ 56 fi; \ 57 skip_next=no; \ 58 strip_trailopt () \ 59 { \ 60 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 61 }; \ 62 for flg in $$sane_makeflags; do \ 63 test $$skip_next = yes && { skip_next=no; continue; }; \ 64 case $$flg in \ 65 *=*|--*) continue;; \ 66 -*I) strip_trailopt 'I'; skip_next=yes;; \ 67 -*I?*) strip_trailopt 'I';; \ 68 -*O) strip_trailopt 'O'; skip_next=yes;; \ 69 -*O?*) strip_trailopt 'O';; \ 70 -*l) strip_trailopt 'l'; skip_next=yes;; \ 71 -*l?*) strip_trailopt 'l';; \ 72 -[dEDm]) skip_next=yes;; \ 73 -[JT]) skip_next=yes;; \ 74 esac; \ 75 case $$flg in \ 76 *$$target_option*) has_opt=yes; break;; \ 77 esac; \ 78 done; \ 79 test $$has_opt = yes 80am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 81am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 82pkgdatadir = $(datadir)/@PACKAGE@ 83pkgincludedir = $(includedir)/@PACKAGE@ 84pkglibdir = $(libdir)/@PACKAGE@ 85pkglibexecdir = $(libexecdir)/@PACKAGE@ 86am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 87install_sh_DATA = $(install_sh) -c -m 644 88install_sh_PROGRAM = $(install_sh) -c 89install_sh_SCRIPT = $(install_sh) -c 90INSTALL_HEADER = $(INSTALL_DATA) 91transform = $(program_transform_name) 92NORMAL_INSTALL = : 93PRE_INSTALL = : 94POST_INSTALL = : 95NORMAL_UNINSTALL = : 96PRE_UNINSTALL = : 97POST_UNINSTALL = : 98build_triplet = @build@ 99host_triplet = @host@ 100@HAVE_X11_TRUE@am__append_1 = test 101subdir = . 102DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ 103 $(top_srcdir)/configure $(am__configure_deps) \ 104 $(srcdir)/config.h.in AUTHORS COPYING ChangeLog INSTALL NEWS \ 105 README compile config.guess config.sub depcomp install-sh \ 106 missing ltmain.sh 107ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 108am__aclocal_m4_deps = $(top_srcdir)/m4/ac_define_dir.m4 \ 109 $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ 110 $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ 111 $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac 112am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 113 $(ACLOCAL_M4) 114am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 115 configure.lineno config.status.lineno 116mkinstalldirs = $(install_sh) -d 117CONFIG_HEADER = config.h 118CONFIG_CLEAN_FILES = 119CONFIG_CLEAN_VPATH_FILES = 120AM_V_P = $(am__v_P_@AM_V@) 121am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 122am__v_P_0 = false 123am__v_P_1 = : 124AM_V_GEN = $(am__v_GEN_@AM_V@) 125am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 126am__v_GEN_0 = @echo " GEN " $@; 127am__v_GEN_1 = 128AM_V_at = $(am__v_at_@AM_V@) 129am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 130am__v_at_0 = @ 131am__v_at_1 = 132SOURCES = 133DIST_SOURCES = 134RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 135 ctags-recursive dvi-recursive html-recursive info-recursive \ 136 install-data-recursive install-dvi-recursive \ 137 install-exec-recursive install-html-recursive \ 138 install-info-recursive install-pdf-recursive \ 139 install-ps-recursive install-recursive installcheck-recursive \ 140 installdirs-recursive pdf-recursive ps-recursive \ 141 tags-recursive uninstall-recursive 142am__can_run_installinfo = \ 143 case $$AM_UPDATE_INFO_DIR in \ 144 n|no|NO) false;; \ 145 *) (install-info --version) >/dev/null 2>&1;; \ 146 esac 147RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 148 distclean-recursive maintainer-clean-recursive 149am__recursive_targets = \ 150 $(RECURSIVE_TARGETS) \ 151 $(RECURSIVE_CLEAN_TARGETS) \ 152 $(am__extra_recursive_targets) 153AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 154 cscope distdir dist dist-all distcheck 155am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ 156 $(LISP)config.h.in 157# Read a list of newline-separated strings from the standard input, 158# and print each of them once, without duplicates. Input order is 159# *not* preserved. 160am__uniquify_input = $(AWK) '\ 161 BEGIN { nonempty = 0; } \ 162 { items[$$0] = 1; nonempty = 1; } \ 163 END { if (nonempty) { for (i in items) print i; }; } \ 164' 165# Make sure the list of sources is unique. This is necessary because, 166# e.g., the same source file might be shared among _SOURCES variables 167# for different programs/libraries. 168am__define_uniq_tagged_files = \ 169 list='$(am__tagged_files)'; \ 170 unique=`for i in $$list; do \ 171 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 172 done | $(am__uniquify_input)` 173ETAGS = etags 174CTAGS = ctags 175CSCOPE = cscope 176DIST_SUBDIRS = man xvmc src test 177DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 178distdir = $(PACKAGE)-$(VERSION) 179top_distdir = $(distdir) 180am__remove_distdir = \ 181 if test -d "$(distdir)"; then \ 182 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 183 && rm -rf "$(distdir)" \ 184 || { sleep 5 && rm -rf "$(distdir)"; }; \ 185 else :; fi 186am__post_remove_distdir = $(am__remove_distdir) 187am__relativize = \ 188 dir0=`pwd`; \ 189 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 190 sed_rest='s,^[^/]*/*,,'; \ 191 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 192 sed_butlast='s,/*[^/]*$$,,'; \ 193 while test -n "$$dir1"; do \ 194 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 195 if test "$$first" != "."; then \ 196 if test "$$first" = ".."; then \ 197 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 198 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 199 else \ 200 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 201 if test "$$first2" = "$$first"; then \ 202 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 203 else \ 204 dir2="../$$dir2"; \ 205 fi; \ 206 dir0="$$dir0"/"$$first"; \ 207 fi; \ 208 fi; \ 209 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 210 done; \ 211 reldir="$$dir2" 212DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 213GZIP_ENV = --best 214DIST_TARGETS = dist-bzip2 dist-gzip 215distuninstallcheck_listfiles = find . -type f -print 216am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 217 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 218distcleancheck_listfiles = find . -type f -print 219ACLOCAL = @ACLOCAL@ 220ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 221ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 222AMTAR = @AMTAR@ 223AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 224APP_MAN_DIR = @APP_MAN_DIR@ 225APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 226AR = @AR@ 227AUTOCONF = @AUTOCONF@ 228AUTOHEADER = @AUTOHEADER@ 229AUTOMAKE = @AUTOMAKE@ 230AWK = @AWK@ 231BASE_CFLAGS = @BASE_CFLAGS@ 232CC = @CC@ 233CCDEPMODE = @CCDEPMODE@ 234CFLAGS = @CFLAGS@ 235CHANGELOG_CMD = @CHANGELOG_CMD@ 236CLOCK_GETTIME_LIBS = @CLOCK_GETTIME_LIBS@ 237CPP = @CPP@ 238CPPFLAGS = @CPPFLAGS@ 239CWARNFLAGS = @CWARNFLAGS@ 240CYGPATH_W = @CYGPATH_W@ 241DEFS = @DEFS@ 242DEPDIR = @DEPDIR@ 243DLLTOOL = @DLLTOOL@ 244DRI1_CFLAGS = @DRI1_CFLAGS@ 245DRI1_LIBS = @DRI1_LIBS@ 246DRI2_CFLAGS = @DRI2_CFLAGS@ 247DRI2_LIBS = @DRI2_LIBS@ 248DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 249DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 250DRIVER_NAME = @DRIVER_NAME@ 251DRI_DRIVER_PATH = @DRI_DRIVER_PATH@ 252DRMINTEL_CFLAGS = @DRMINTEL_CFLAGS@ 253DRMINTEL_LIBS = @DRMINTEL_LIBS@ 254DRM_CFLAGS = @DRM_CFLAGS@ 255DRM_LIBS = @DRM_LIBS@ 256DSYMUTIL = @DSYMUTIL@ 257DUMPBIN = @DUMPBIN@ 258ECHO_C = @ECHO_C@ 259ECHO_N = @ECHO_N@ 260ECHO_T = @ECHO_T@ 261EGREP = @EGREP@ 262EXEEXT = @EXEEXT@ 263FGREP = @FGREP@ 264FILE_MAN_DIR = @FILE_MAN_DIR@ 265FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 266GEN4ASM_CFLAGS = @GEN4ASM_CFLAGS@ 267GEN4ASM_LIBS = @GEN4ASM_LIBS@ 268GREP = @GREP@ 269INSTALL = @INSTALL@ 270INSTALL_CMD = @INSTALL_CMD@ 271INSTALL_DATA = @INSTALL_DATA@ 272INSTALL_PROGRAM = @INSTALL_PROGRAM@ 273INSTALL_SCRIPT = @INSTALL_SCRIPT@ 274INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 275INTEL_GEN4ASM = @INTEL_GEN4ASM@ 276LD = @LD@ 277LDFLAGS = @LDFLAGS@ 278LIBGLAMOR_CFLAGS = @LIBGLAMOR_CFLAGS@ 279LIBGLAMOR_EGL_CFLAGS = @LIBGLAMOR_EGL_CFLAGS@ 280LIBGLAMOR_EGL_LIBS = @LIBGLAMOR_EGL_LIBS@ 281LIBGLAMOR_LIBS = @LIBGLAMOR_LIBS@ 282LIBOBJS = @LIBOBJS@ 283LIBS = @LIBS@ 284LIBTOOL = @LIBTOOL@ 285LIB_MAN_DIR = @LIB_MAN_DIR@ 286LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 287LIPO = @LIPO@ 288LN_S = @LN_S@ 289LTLIBOBJS = @LTLIBOBJS@ 290MAKEINFO = @MAKEINFO@ 291MANIFEST_TOOL = @MANIFEST_TOOL@ 292MAN_SUBSTS = @MAN_SUBSTS@ 293MISC_MAN_DIR = @MISC_MAN_DIR@ 294MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 295MKDIR_P = @MKDIR_P@ 296NM = @NM@ 297NMEDIT = @NMEDIT@ 298NOWARNFLAGS = @NOWARNFLAGS@ 299OBJDUMP = @OBJDUMP@ 300OBJEXT = @OBJEXT@ 301OTOOL = @OTOOL@ 302OTOOL64 = @OTOOL64@ 303PACKAGE = @PACKAGE@ 304PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 305PACKAGE_NAME = @PACKAGE_NAME@ 306PACKAGE_STRING = @PACKAGE_STRING@ 307PACKAGE_TARNAME = @PACKAGE_TARNAME@ 308PACKAGE_URL = @PACKAGE_URL@ 309PACKAGE_VERSION = @PACKAGE_VERSION@ 310PATH_SEPARATOR = @PATH_SEPARATOR@ 311PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@ 312PCIACCESS_LIBS = @PCIACCESS_LIBS@ 313PKG_CONFIG = @PKG_CONFIG@ 314PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 315PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 316RANLIB = @RANLIB@ 317SED = @SED@ 318SET_MAKE = @SET_MAKE@ 319SHELL = @SHELL@ 320STRICT_CFLAGS = @STRICT_CFLAGS@ 321STRIP = @STRIP@ 322UDEV_CFLAGS = @UDEV_CFLAGS@ 323UDEV_LIBS = @UDEV_LIBS@ 324VALGRIND_CFLAGS = @VALGRIND_CFLAGS@ 325VALGRIND_LIBS = @VALGRIND_LIBS@ 326VERSION = @VERSION@ 327X11_CFLAGS = @X11_CFLAGS@ 328X11_LIBS = @X11_LIBS@ 329XCB_CFLAGS = @XCB_CFLAGS@ 330XCB_LIBS = @XCB_LIBS@ 331XORG_CFLAGS = @XORG_CFLAGS@ 332XORG_LIBS = @XORG_LIBS@ 333XORG_MAN_PAGE = @XORG_MAN_PAGE@ 334XVMCLIB_CFLAGS = @XVMCLIB_CFLAGS@ 335XVMCLIB_LIBS = @XVMCLIB_LIBS@ 336abs_builddir = @abs_builddir@ 337abs_srcdir = @abs_srcdir@ 338abs_top_builddir = @abs_top_builddir@ 339abs_top_srcdir = @abs_top_srcdir@ 340ac_ct_AR = @ac_ct_AR@ 341ac_ct_CC = @ac_ct_CC@ 342ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 343am__include = @am__include@ 344am__leading_dot = @am__leading_dot@ 345am__quote = @am__quote@ 346am__tar = @am__tar@ 347am__untar = @am__untar@ 348bindir = @bindir@ 349build = @build@ 350build_alias = @build_alias@ 351build_cpu = @build_cpu@ 352build_os = @build_os@ 353build_vendor = @build_vendor@ 354builddir = @builddir@ 355datadir = @datadir@ 356datarootdir = @datarootdir@ 357docdir = @docdir@ 358dvidir = @dvidir@ 359exec_prefix = @exec_prefix@ 360host = @host@ 361host_alias = @host_alias@ 362host_cpu = @host_cpu@ 363host_os = @host_os@ 364host_vendor = @host_vendor@ 365htmldir = @htmldir@ 366includedir = @includedir@ 367infodir = @infodir@ 368install_sh = @install_sh@ 369libdir = @libdir@ 370libexecdir = @libexecdir@ 371localedir = @localedir@ 372localstatedir = @localstatedir@ 373mandir = @mandir@ 374mkdir_p = @mkdir_p@ 375moduledir = @moduledir@ 376oldincludedir = @oldincludedir@ 377pdfdir = @pdfdir@ 378prefix = @prefix@ 379program_transform_name = @program_transform_name@ 380psdir = @psdir@ 381sbindir = @sbindir@ 382sharedstatedir = @sharedstatedir@ 383srcdir = @srcdir@ 384sysconfdir = @sysconfdir@ 385target_alias = @target_alias@ 386top_build_prefix = @top_build_prefix@ 387top_builddir = @top_builddir@ 388top_srcdir = @top_srcdir@ 389ACLOCAL_AMFLAGS = ${ACLOCAL_FLAGS} -I m4 390SUBDIRS = man xvmc src $(am__append_1) 391MAINTAINERCLEANFILES = ChangeLog INSTALL 392all: config.h 393 $(MAKE) $(AM_MAKEFLAGS) all-recursive 394 395.SUFFIXES: 396am--refresh: Makefile 397 @: 398$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 399 @for dep in $?; do \ 400 case '$(am__configure_deps)' in \ 401 *$$dep*) \ 402 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 403 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 404 && exit 0; \ 405 exit 1;; \ 406 esac; \ 407 done; \ 408 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 409 $(am__cd) $(top_srcdir) && \ 410 $(AUTOMAKE) --foreign Makefile 411.PRECIOUS: Makefile 412Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 413 @case '$?' in \ 414 *config.status*) \ 415 echo ' $(SHELL) ./config.status'; \ 416 $(SHELL) ./config.status;; \ 417 *) \ 418 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 419 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 420 esac; 421 422$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 423 $(SHELL) ./config.status --recheck 424 425$(top_srcdir)/configure: $(am__configure_deps) 426 $(am__cd) $(srcdir) && $(AUTOCONF) 427$(ACLOCAL_M4): $(am__aclocal_m4_deps) 428 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 429$(am__aclocal_m4_deps): 430 431config.h: stamp-h1 432 @if test ! -f $@; then rm -f stamp-h1; else :; fi 433 @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi 434 435stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 436 @rm -f stamp-h1 437 cd $(top_builddir) && $(SHELL) ./config.status config.h 438$(srcdir)/config.h.in: $(am__configure_deps) 439 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 440 rm -f stamp-h1 441 touch $@ 442 443distclean-hdr: 444 -rm -f config.h stamp-h1 445 446mostlyclean-libtool: 447 -rm -f *.lo 448 449clean-libtool: 450 -rm -rf .libs _libs 451 452distclean-libtool: 453 -rm -f libtool config.lt 454 455# This directory's subdirectories are mostly independent; you can cd 456# into them and run 'make' without going through this Makefile. 457# To change the values of 'make' variables: instead of editing Makefiles, 458# (1) if the variable is set in 'config.status', edit 'config.status' 459# (which will cause the Makefiles to be regenerated when you run 'make'); 460# (2) otherwise, pass the desired values on the 'make' command line. 461$(am__recursive_targets): 462 @fail=; \ 463 if $(am__make_keepgoing); then \ 464 failcom='fail=yes'; \ 465 else \ 466 failcom='exit 1'; \ 467 fi; \ 468 dot_seen=no; \ 469 target=`echo $@ | sed s/-recursive//`; \ 470 case "$@" in \ 471 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 472 *) list='$(SUBDIRS)' ;; \ 473 esac; \ 474 for subdir in $$list; do \ 475 echo "Making $$target in $$subdir"; \ 476 if test "$$subdir" = "."; then \ 477 dot_seen=yes; \ 478 local_target="$$target-am"; \ 479 else \ 480 local_target="$$target"; \ 481 fi; \ 482 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 483 || eval $$failcom; \ 484 done; \ 485 if test "$$dot_seen" = "no"; then \ 486 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 487 fi; test -z "$$fail" 488 489ID: $(am__tagged_files) 490 $(am__define_uniq_tagged_files); mkid -fID $$unique 491tags: tags-recursive 492TAGS: tags 493 494tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 495 set x; \ 496 here=`pwd`; \ 497 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 498 include_option=--etags-include; \ 499 empty_fix=.; \ 500 else \ 501 include_option=--include; \ 502 empty_fix=; \ 503 fi; \ 504 list='$(SUBDIRS)'; for subdir in $$list; do \ 505 if test "$$subdir" = .; then :; else \ 506 test ! -f $$subdir/TAGS || \ 507 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 508 fi; \ 509 done; \ 510 $(am__define_uniq_tagged_files); \ 511 shift; \ 512 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 513 test -n "$$unique" || unique=$$empty_fix; \ 514 if test $$# -gt 0; then \ 515 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 516 "$$@" $$unique; \ 517 else \ 518 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 519 $$unique; \ 520 fi; \ 521 fi 522ctags: ctags-recursive 523 524CTAGS: ctags 525ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 526 $(am__define_uniq_tagged_files); \ 527 test -z "$(CTAGS_ARGS)$$unique" \ 528 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 529 $$unique 530 531GTAGS: 532 here=`$(am__cd) $(top_builddir) && pwd` \ 533 && $(am__cd) $(top_srcdir) \ 534 && gtags -i $(GTAGS_ARGS) "$$here" 535cscope: cscope.files 536 test ! -s cscope.files \ 537 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 538clean-cscope: 539 -rm -f cscope.files 540cscope.files: clean-cscope cscopelist 541cscopelist: cscopelist-recursive 542 543cscopelist-am: $(am__tagged_files) 544 list='$(am__tagged_files)'; \ 545 case "$(srcdir)" in \ 546 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 547 *) sdir=$(subdir)/$(srcdir) ;; \ 548 esac; \ 549 for i in $$list; do \ 550 if test -f "$$i"; then \ 551 echo "$(subdir)/$$i"; \ 552 else \ 553 echo "$$sdir/$$i"; \ 554 fi; \ 555 done >> $(top_builddir)/cscope.files 556 557distclean-tags: 558 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 559 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 560 561distdir: $(DISTFILES) 562 $(am__remove_distdir) 563 test -d "$(distdir)" || mkdir "$(distdir)" 564 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 565 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 566 list='$(DISTFILES)'; \ 567 dist_files=`for file in $$list; do echo $$file; done | \ 568 sed -e "s|^$$srcdirstrip/||;t" \ 569 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 570 case $$dist_files in \ 571 */*) $(MKDIR_P) `echo "$$dist_files" | \ 572 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 573 sort -u` ;; \ 574 esac; \ 575 for file in $$dist_files; do \ 576 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 577 if test -d $$d/$$file; then \ 578 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 579 if test -d "$(distdir)/$$file"; then \ 580 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 581 fi; \ 582 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 583 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 584 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 585 fi; \ 586 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 587 else \ 588 test -f "$(distdir)/$$file" \ 589 || cp -p $$d/$$file "$(distdir)/$$file" \ 590 || exit 1; \ 591 fi; \ 592 done 593 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 594 if test "$$subdir" = .; then :; else \ 595 $(am__make_dryrun) \ 596 || test -d "$(distdir)/$$subdir" \ 597 || $(MKDIR_P) "$(distdir)/$$subdir" \ 598 || exit 1; \ 599 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 600 $(am__relativize); \ 601 new_distdir=$$reldir; \ 602 dir1=$$subdir; dir2="$(top_distdir)"; \ 603 $(am__relativize); \ 604 new_top_distdir=$$reldir; \ 605 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 606 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 607 ($(am__cd) $$subdir && \ 608 $(MAKE) $(AM_MAKEFLAGS) \ 609 top_distdir="$$new_top_distdir" \ 610 distdir="$$new_distdir" \ 611 am__remove_distdir=: \ 612 am__skip_length_check=: \ 613 am__skip_mode_fix=: \ 614 distdir) \ 615 || exit 1; \ 616 fi; \ 617 done 618 $(MAKE) $(AM_MAKEFLAGS) \ 619 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 620 dist-hook 621 -test -n "$(am__skip_mode_fix)" \ 622 || find "$(distdir)" -type d ! -perm -755 \ 623 -exec chmod u+rwx,go+rx {} \; -o \ 624 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 625 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 626 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 627 || chmod -R a+r "$(distdir)" 628dist-gzip: distdir 629 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 630 $(am__post_remove_distdir) 631dist-bzip2: distdir 632 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 633 $(am__post_remove_distdir) 634 635dist-lzip: distdir 636 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 637 $(am__post_remove_distdir) 638 639dist-xz: distdir 640 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 641 $(am__post_remove_distdir) 642 643dist-tarZ: distdir 644 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 645 $(am__post_remove_distdir) 646 647dist-shar: distdir 648 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 649 $(am__post_remove_distdir) 650 651dist-zip: distdir 652 -rm -f $(distdir).zip 653 zip -rq $(distdir).zip $(distdir) 654 $(am__post_remove_distdir) 655 656dist dist-all: 657 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 658 $(am__post_remove_distdir) 659 660# This target untars the dist file and tries a VPATH configuration. Then 661# it guarantees that the distribution is self-contained by making another 662# tarfile. 663distcheck: dist 664 case '$(DIST_ARCHIVES)' in \ 665 *.tar.gz*) \ 666 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ 667 *.tar.bz2*) \ 668 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 669 *.tar.lz*) \ 670 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 671 *.tar.xz*) \ 672 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 673 *.tar.Z*) \ 674 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 675 *.shar.gz*) \ 676 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ 677 *.zip*) \ 678 unzip $(distdir).zip ;;\ 679 esac 680 chmod -R a-w $(distdir) 681 chmod u+w $(distdir) 682 mkdir $(distdir)/_build $(distdir)/_inst 683 chmod a-w $(distdir) 684 test -d $(distdir)/_build || exit 0; \ 685 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 686 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 687 && am__cwd=`pwd` \ 688 && $(am__cd) $(distdir)/_build \ 689 && ../configure --srcdir=.. --prefix="$$dc_install_base" \ 690 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 691 $(DISTCHECK_CONFIGURE_FLAGS) \ 692 && $(MAKE) $(AM_MAKEFLAGS) \ 693 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 694 && $(MAKE) $(AM_MAKEFLAGS) check \ 695 && $(MAKE) $(AM_MAKEFLAGS) install \ 696 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 697 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 698 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 699 distuninstallcheck \ 700 && chmod -R a-w "$$dc_install_base" \ 701 && ({ \ 702 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 703 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 704 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 705 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 706 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 707 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 708 && rm -rf "$$dc_destdir" \ 709 && $(MAKE) $(AM_MAKEFLAGS) dist \ 710 && rm -rf $(DIST_ARCHIVES) \ 711 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 712 && cd "$$am__cwd" \ 713 || exit 1 714 $(am__post_remove_distdir) 715 @(echo "$(distdir) archives ready for distribution: "; \ 716 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 717 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 718distuninstallcheck: 719 @test -n '$(distuninstallcheck_dir)' || { \ 720 echo 'ERROR: trying to run $@ with an empty' \ 721 '$$(distuninstallcheck_dir)' >&2; \ 722 exit 1; \ 723 }; \ 724 $(am__cd) '$(distuninstallcheck_dir)' || { \ 725 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 726 exit 1; \ 727 }; \ 728 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 729 || { echo "ERROR: files left after uninstall:" ; \ 730 if test -n "$(DESTDIR)"; then \ 731 echo " (check DESTDIR support)"; \ 732 fi ; \ 733 $(distuninstallcheck_listfiles) ; \ 734 exit 1; } >&2 735distcleancheck: distclean 736 @if test '$(srcdir)' = . ; then \ 737 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 738 exit 1 ; \ 739 fi 740 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 741 || { echo "ERROR: files left in build directory after distclean:" ; \ 742 $(distcleancheck_listfiles) ; \ 743 exit 1; } >&2 744check-am: all-am 745check: check-recursive 746all-am: Makefile config.h 747installdirs: installdirs-recursive 748installdirs-am: 749install: install-recursive 750install-exec: install-exec-recursive 751install-data: install-data-recursive 752uninstall: uninstall-recursive 753 754install-am: all-am 755 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 756 757installcheck: installcheck-recursive 758install-strip: 759 if test -z '$(STRIP)'; then \ 760 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 761 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 762 install; \ 763 else \ 764 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 765 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 766 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 767 fi 768mostlyclean-generic: 769 770clean-generic: 771 772distclean-generic: 773 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 774 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 775 776maintainer-clean-generic: 777 @echo "This command is intended for maintainers to use" 778 @echo "it deletes files that may require special tools to rebuild." 779 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 780clean: clean-recursive 781 782clean-am: clean-generic clean-libtool mostlyclean-am 783 784distclean: distclean-recursive 785 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 786 -rm -f Makefile 787distclean-am: clean-am distclean-generic distclean-hdr \ 788 distclean-libtool distclean-tags 789 790dvi: dvi-recursive 791 792dvi-am: 793 794html: html-recursive 795 796html-am: 797 798info: info-recursive 799 800info-am: 801 802install-data-am: 803 804install-dvi: install-dvi-recursive 805 806install-dvi-am: 807 808install-exec-am: 809 810install-html: install-html-recursive 811 812install-html-am: 813 814install-info: install-info-recursive 815 816install-info-am: 817 818install-man: 819 820install-pdf: install-pdf-recursive 821 822install-pdf-am: 823 824install-ps: install-ps-recursive 825 826install-ps-am: 827 828installcheck-am: 829 830maintainer-clean: maintainer-clean-recursive 831 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 832 -rm -rf $(top_srcdir)/autom4te.cache 833 -rm -f Makefile 834maintainer-clean-am: distclean-am maintainer-clean-generic 835 836mostlyclean: mostlyclean-recursive 837 838mostlyclean-am: mostlyclean-generic mostlyclean-libtool 839 840pdf: pdf-recursive 841 842pdf-am: 843 844ps: ps-recursive 845 846ps-am: 847 848uninstall-am: 849 850.MAKE: $(am__recursive_targets) all install-am install-strip 851 852.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 853 am--refresh check check-am clean clean-cscope clean-generic \ 854 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 855 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ 856 dist-tarZ dist-xz dist-zip distcheck distclean \ 857 distclean-generic distclean-hdr distclean-libtool \ 858 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 859 dvi-am html html-am info info-am install install-am \ 860 install-data install-data-am install-dvi install-dvi-am \ 861 install-exec install-exec-am install-html install-html-am \ 862 install-info install-info-am install-man install-pdf \ 863 install-pdf-am install-ps install-ps-am install-strip \ 864 installcheck installcheck-am installdirs installdirs-am \ 865 maintainer-clean maintainer-clean-generic mostlyclean \ 866 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ 867 tags tags-am uninstall uninstall-am 868 869 870.PHONY: ChangeLog INSTALL 871 872INSTALL: 873 $(INSTALL_CMD) 874 875ChangeLog: 876 $(CHANGELOG_CMD) 877 878dist-hook: ChangeLog INSTALL 879 880# Tell versions [3.59,3.63) of GNU make to not export all variables. 881# Otherwise a system limit (for SysV at least) may be exceeded. 882.NOEXPORT: 883