Home | History | Annotate | Line # | Download | only in dist
README revision 1.1
      1  1.1  macallan   Information for newport Users
      2  1.1  macallan   Guido Guenther
      3  1.1  macallan   24 February 2003
      4  1.1  macallan   ____________________________________________________________
      5  1.1  macallan 
      6  1.1  macallan   Table of Contents
      7  1.1  macallan 
      8  1.1  macallan 
      9  1.1  macallan   1. Supported Hardware
     10  1.1  macallan   2. Features
     11  1.1  macallan   3. Notes
     12  1.1  macallan   4. Configuration
     13  1.1  macallan   5. Authors
     14  1.1  macallan   6. Acknowledgements
     15  1.1  macallan 
     16  1.1  macallan 
     17  1.1  macallan   ______________________________________________________________________
     18  1.1  macallan 
     19  1.1  macallan   [1m1.  Supported Hardware[0m
     20  1.1  macallan 
     21  1.1  macallan   This is an unaccelerated driver for the SGI newport cards (a.k.a. XL)
     22  1.1  macallan   as found in the SGI Indy and Indigo2. Both the 8bit and 24bit versions
     23  1.1  macallan   are tested and working.
     24  1.1  macallan 
     25  1.1  macallan 
     26  1.1  macallan   [1m2.  Features[0m
     27  1.1  macallan 
     28  1.1  macallan 
     29  1.1  macallan   +o  Support for 8 and 24 bit pixel depths
     30  1.1  macallan 
     31  1.1  macallan   +o  Hardware cursor support to reduce flicker
     32  1.1  macallan 
     33  1.1  macallan 
     34  1.1  macallan   [1m3.  Notes[0m
     35  1.1  macallan 
     36  1.1  macallan 
     37  1.1  macallan   +o  X -configure does not generate a xorg.conf file.
     38  1.1  macallan 
     39  1.1  macallan   +o  There's only a 1280x1024 mode.
     40  1.1  macallan 
     41  1.1  macallan 
     42  1.1  macallan 
     43  1.1  macallan   [1m4.  Configuration[0m
     44  1.1  macallan 
     45  1.1  macallan   The driver auto-detects all device information necessary to initialize
     46  1.1  macallan   the card on the Indy. The only lines you need in the "Device" section
     47  1.1  macallan   of your xorg.conf file are:
     48  1.1  macallan 
     49  1.1  macallan          Section "Device"
     50  1.1  macallan              Identifier "SGI newport"
     51  1.1  macallan              Driver     "newport"
     52  1.1  macallan          EndSection
     53  1.1  macallan 
     54  1.1  macallan 
     55  1.1  macallan   Indigo2 users have to use the BusID option as documented below.
     56  1.1  macallan 
     57  1.1  macallan   However, if you have problems with auto-detection, you can specify:
     58  1.1  macallan 
     59  1.1  macallan   +o  bitplanes - number of physical bitplanes (8 or 24)
     60  1.1  macallan 
     61  1.1  macallan   +o  HWCursor - enable or disable hardware cursor
     62  1.1  macallan 
     63  1.1  macallan   +o  BusID - set this to "1" on the Indigo2 XL
     64  1.1  macallan 
     65  1.1  macallan 
     66  1.1  macallan 
     67  1.1  macallan   [1m5.  Authors[0m
     68  1.1  macallan 
     69  1.1  macallan 
     70  1.1  macallan   +o  Guido Guenther  <agx (a] sigxcpu.org>
     71  1.1  macallan 
     72  1.1  macallan 
     73  1.1  macallan 
     74  1.1  macallan   [1m6.  Acknowledgements[0m
     75  1.1  macallan 
     76  1.1  macallan 
     77  1.1  macallan   +o  Gleb O. Raiko  <raiko (a] niisi.msk.ru> for getting the beast to build
     78  1.1  macallan 
     79  1.1  macallan   +o  Ralf Baechle  <ralf (a] oss.sgi.com> for his patience...
     80  1.1  macallan 
     81  1.1  macallan   +o  Ulf Carlsson  <ulfc (a] calypso.engr.sgi.com> for comments and elf
     82  1.1  macallan      loader code
     83  1.1  macallan 
     84  1.1  macallan   +o  Nina A. Podolskaya  <nap (a] niisi.msk.ru> for elf loader code
     85  1.1  macallan 
     86  1.1  macallan   +o  all the guys who wrote the newport_con linux kernel code
     87  1.1  macallan 
     88  1.1  macallan 
     89  1.1  macallan 
     90