Makefile.in revision c97b1c41 
1# Makefile.in generated by automake 1.13.3 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17#  Copyright 2005 Adam Jackson.
18#
19#  Permission is hereby granted, free of charge, to any person obtaining a
20#  copy of this software and associated documentation files (the "Software"),
21#  to deal in the Software without restriction, including without limitation
22#  on the rights to use, copy, modify, merge, publish, distribute, sub
23#  license, and/or sell copies of the Software, and to permit persons to whom
24#  the Software is furnished to do so, subject to the following conditions:
25#
26#  The above copyright notice and this permission notice (including the next
27#  paragraph) shall be included in all copies or substantial portions of the
28#  Software.
29#
30#  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
31#  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
32#  FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.  IN NO EVENT SHALL
33#  ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
34#  IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
35#  CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
36VPATH = @srcdir@
37am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
38am__make_running_with_option = \
39  case $${target_option-} in \
40      ?) ;; \
41      *) echo "am__make_running_with_option: internal error: invalid" \
42              "target option '$${target_option-}' specified" >&2; \
43         exit 1;; \
44  esac; \
45  has_opt=no; \
46  sane_makeflags=$$MAKEFLAGS; \
47  if $(am__is_gnu_make); then \
48    sane_makeflags=$$MFLAGS; \
49  else \
50    case $$MAKEFLAGS in \
51      *\\[\ \	]*) \
52        bs=\\; \
53        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
54          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
55    esac; \
56  fi; \
57  skip_next=no; \
58  strip_trailopt () \
59  { \
60    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
61  }; \
62  for flg in $$sane_makeflags; do \
63    test $$skip_next = yes && { skip_next=no; continue; }; \
64    case $$flg in \
65      *=*|--*) continue;; \
66        -*I) strip_trailopt 'I'; skip_next=yes;; \
67      -*I?*) strip_trailopt 'I';; \
68        -*O) strip_trailopt 'O'; skip_next=yes;; \
69      -*O?*) strip_trailopt 'O';; \
70        -*l) strip_trailopt 'l'; skip_next=yes;; \
71      -*l?*) strip_trailopt 'l';; \
72      -[dEDm]) skip_next=yes;; \
73      -[JT]) skip_next=yes;; \
74    esac; \
75    case $$flg in \
76      *$$target_option*) has_opt=yes; break;; \
77    esac; \
78  done; \
79  test $$has_opt = yes
80am__make_dryrun = (target_option=n; $(am__make_running_with_option))
81am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
82pkgdatadir = $(datadir)/@PACKAGE@
83pkgincludedir = $(includedir)/@PACKAGE@
84pkglibdir = $(libdir)/@PACKAGE@
85pkglibexecdir = $(libexecdir)/@PACKAGE@
86am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
87install_sh_DATA = $(install_sh) -c -m 644
88install_sh_PROGRAM = $(install_sh) -c
89install_sh_SCRIPT = $(install_sh) -c
90INSTALL_HEADER = $(INSTALL_DATA)
91transform = $(program_transform_name)
92NORMAL_INSTALL = :
93PRE_INSTALL = :
94POST_INSTALL = :
95NORMAL_UNINSTALL = :
96PRE_UNINSTALL = :
97POST_UNINSTALL = :
98build_triplet = @build@
99host_triplet = @host@
100subdir = .
101DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
102	$(top_srcdir)/configure $(am__configure_deps) \
103	$(srcdir)/config.h.in COPYING ChangeLog INSTALL README \
104	config.guess config.sub depcomp install-sh missing ltmain.sh
105ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
106am__aclocal_m4_deps = $(top_srcdir)/configure.ac
107am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
108	$(ACLOCAL_M4)
109am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
110 configure.lineno config.status.lineno
111mkinstalldirs = $(install_sh) -d
112CONFIG_HEADER = config.h
113CONFIG_CLEAN_FILES =
114CONFIG_CLEAN_VPATH_FILES =
115AM_V_P = $(am__v_P_@AM_V@)
116am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
117am__v_P_0 = false
118am__v_P_1 = :
119AM_V_GEN = $(am__v_GEN_@AM_V@)
120am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
121am__v_GEN_0 = @echo "  GEN     " $@;
122am__v_GEN_1 = 
123AM_V_at = $(am__v_at_@AM_V@)
124am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
125am__v_at_0 = @
126am__v_at_1 = 
127SOURCES =
128DIST_SOURCES =
129RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
130	ctags-recursive dvi-recursive html-recursive info-recursive \
131	install-data-recursive install-dvi-recursive \
132	install-exec-recursive install-html-recursive \
133	install-info-recursive install-pdf-recursive \
134	install-ps-recursive install-recursive installcheck-recursive \
135	installdirs-recursive pdf-recursive ps-recursive \
136	tags-recursive uninstall-recursive
137am__can_run_installinfo = \
138  case $$AM_UPDATE_INFO_DIR in \
139    n|no|NO) false;; \
140    *) (install-info --version) >/dev/null 2>&1;; \
141  esac
142RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
143  distclean-recursive maintainer-clean-recursive
144am__recursive_targets = \
145  $(RECURSIVE_TARGETS) \
146  $(RECURSIVE_CLEAN_TARGETS) \
147  $(am__extra_recursive_targets)
148AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
149	cscope distdir dist dist-all distcheck
150am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
151	$(LISP)config.h.in
152# Read a list of newline-separated strings from the standard input,
153# and print each of them once, without duplicates.  Input order is
154# *not* preserved.
155am__uniquify_input = $(AWK) '\
156  BEGIN { nonempty = 0; } \
157  { items[$$0] = 1; nonempty = 1; } \
158  END { if (nonempty) { for (i in items) print i; }; } \
159'
160# Make sure the list of sources is unique.  This is necessary because,
161# e.g., the same source file might be shared among _SOURCES variables
162# for different programs/libraries.
163am__define_uniq_tagged_files = \
164  list='$(am__tagged_files)'; \
165  unique=`for i in $$list; do \
166    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
167  done | $(am__uniquify_input)`
168ETAGS = etags
169CTAGS = ctags
170CSCOPE = cscope
171DIST_SUBDIRS = $(SUBDIRS)
172DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
173distdir = $(PACKAGE)-$(VERSION)
174top_distdir = $(distdir)
175am__remove_distdir = \
176  if test -d "$(distdir)"; then \
177    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
178      && rm -rf "$(distdir)" \
179      || { sleep 5 && rm -rf "$(distdir)"; }; \
180  else :; fi
181am__post_remove_distdir = $(am__remove_distdir)
182am__relativize = \
183  dir0=`pwd`; \
184  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
185  sed_rest='s,^[^/]*/*,,'; \
186  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
187  sed_butlast='s,/*[^/]*$$,,'; \
188  while test -n "$$dir1"; do \
189    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
190    if test "$$first" != "."; then \
191      if test "$$first" = ".."; then \
192        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
193        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
194      else \
195        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
196        if test "$$first2" = "$$first"; then \
197          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
198        else \
199          dir2="../$$dir2"; \
200        fi; \
201        dir0="$$dir0"/"$$first"; \
202      fi; \
203    fi; \
204    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
205  done; \
206  reldir="$$dir2"
207DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
208GZIP_ENV = --best
209DIST_TARGETS = dist-bzip2 dist-gzip
210distuninstallcheck_listfiles = find . -type f -print
211am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
212  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
213distcleancheck_listfiles = find . -type f -print
214ACLOCAL = @ACLOCAL@
215ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
216ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
217AMTAR = @AMTAR@
218AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
219APP_MAN_DIR = @APP_MAN_DIR@
220APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
221AR = @AR@
222AUTOCONF = @AUTOCONF@
223AUTOHEADER = @AUTOHEADER@
224AUTOMAKE = @AUTOMAKE@
225AWK = @AWK@
226BASE_CFLAGS = @BASE_CFLAGS@
227CC = @CC@
228CCDEPMODE = @CCDEPMODE@
229CFLAGS = @CFLAGS@
230CHANGELOG_CMD = @CHANGELOG_CMD@
231CPP = @CPP@
232CPPFLAGS = @CPPFLAGS@
233CWARNFLAGS = @CWARNFLAGS@
234CYGPATH_W = @CYGPATH_W@
235DEFS = @DEFS@
236DEPDIR = @DEPDIR@
237DLLTOOL = @DLLTOOL@
238DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
239DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
240DRIVER_NAME = @DRIVER_NAME@
241DSYMUTIL = @DSYMUTIL@
242DUMPBIN = @DUMPBIN@
243ECHO_C = @ECHO_C@
244ECHO_N = @ECHO_N@
245ECHO_T = @ECHO_T@
246EGREP = @EGREP@
247EXEEXT = @EXEEXT@
248FGREP = @FGREP@
249FILE_MAN_DIR = @FILE_MAN_DIR@
250FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
251GREP = @GREP@
252INSTALL = @INSTALL@
253INSTALL_CMD = @INSTALL_CMD@
254INSTALL_DATA = @INSTALL_DATA@
255INSTALL_PROGRAM = @INSTALL_PROGRAM@
256INSTALL_SCRIPT = @INSTALL_SCRIPT@
257INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
258LD = @LD@
259LDFLAGS = @LDFLAGS@
260LIBOBJS = @LIBOBJS@
261LIBS = @LIBS@
262LIBTOOL = @LIBTOOL@
263LIB_MAN_DIR = @LIB_MAN_DIR@
264LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
265LIPO = @LIPO@
266LN_S = @LN_S@
267LTLIBOBJS = @LTLIBOBJS@
268MAKEINFO = @MAKEINFO@
269MANIFEST_TOOL = @MANIFEST_TOOL@
270MAN_SUBSTS = @MAN_SUBSTS@
271MISC_MAN_DIR = @MISC_MAN_DIR@
272MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
273MKDIR_P = @MKDIR_P@
274NM = @NM@
275NMEDIT = @NMEDIT@
276OBJDUMP = @OBJDUMP@
277OBJEXT = @OBJEXT@
278OTOOL = @OTOOL@
279OTOOL64 = @OTOOL64@
280PACKAGE = @PACKAGE@
281PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
282PACKAGE_NAME = @PACKAGE_NAME@
283PACKAGE_STRING = @PACKAGE_STRING@
284PACKAGE_TARNAME = @PACKAGE_TARNAME@
285PACKAGE_URL = @PACKAGE_URL@
286PACKAGE_VERSION = @PACKAGE_VERSION@
287PATH_SEPARATOR = @PATH_SEPARATOR@
288PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
289PCIACCESS_LIBS = @PCIACCESS_LIBS@
290PKG_CONFIG = @PKG_CONFIG@
291PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
292PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
293RANLIB = @RANLIB@
294SED = @SED@
295SET_MAKE = @SET_MAKE@
296SHELL = @SHELL@
297STRICT_CFLAGS = @STRICT_CFLAGS@
298STRIP = @STRIP@
299VERSION = @VERSION@
300XEXT_CFLAGS = @XEXT_CFLAGS@
301XEXT_LIBS = @XEXT_LIBS@
302XORG_CFLAGS = @XORG_CFLAGS@
303XORG_LIBS = @XORG_LIBS@
304XORG_MAN_PAGE = @XORG_MAN_PAGE@
305abs_builddir = @abs_builddir@
306abs_srcdir = @abs_srcdir@
307abs_top_builddir = @abs_top_builddir@
308abs_top_srcdir = @abs_top_srcdir@
309ac_ct_AR = @ac_ct_AR@
310ac_ct_CC = @ac_ct_CC@
311ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
312am__include = @am__include@
313am__leading_dot = @am__leading_dot@
314am__quote = @am__quote@
315am__tar = @am__tar@
316am__untar = @am__untar@
317bindir = @bindir@
318build = @build@
319build_alias = @build_alias@
320build_cpu = @build_cpu@
321build_os = @build_os@
322build_vendor = @build_vendor@
323builddir = @builddir@
324datadir = @datadir@
325datarootdir = @datarootdir@
326docdir = @docdir@
327dvidir = @dvidir@
328exec_prefix = @exec_prefix@
329host = @host@
330host_alias = @host_alias@
331host_cpu = @host_cpu@
332host_os = @host_os@
333host_vendor = @host_vendor@
334htmldir = @htmldir@
335includedir = @includedir@
336infodir = @infodir@
337install_sh = @install_sh@
338libdir = @libdir@
339libexecdir = @libexecdir@
340localedir = @localedir@
341localstatedir = @localstatedir@
342mandir = @mandir@
343mkdir_p = @mkdir_p@
344moduledir = @moduledir@
345oldincludedir = @oldincludedir@
346pdfdir = @pdfdir@
347prefix = @prefix@
348program_transform_name = @program_transform_name@
349psdir = @psdir@
350sbindir = @sbindir@
351sharedstatedir = @sharedstatedir@
352srcdir = @srcdir@
353sysconfdir = @sysconfdir@
354target_alias = @target_alias@
355top_build_prefix = @top_build_prefix@
356top_builddir = @top_builddir@
357top_srcdir = @top_srcdir@
358SUBDIRS = src man
359MAINTAINERCLEANFILES = ChangeLog INSTALL
360all: config.h
361	$(MAKE) $(AM_MAKEFLAGS) all-recursive
362
363.SUFFIXES:
364am--refresh: Makefile
365	@:
366$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
367	@for dep in $?; do \
368	  case '$(am__configure_deps)' in \
369	    *$$dep*) \
370	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
371	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
372		&& exit 0; \
373	      exit 1;; \
374	  esac; \
375	done; \
376	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
377	$(am__cd) $(top_srcdir) && \
378	  $(AUTOMAKE) --foreign Makefile
379.PRECIOUS: Makefile
380Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
381	@case '$?' in \
382	  *config.status*) \
383	    echo ' $(SHELL) ./config.status'; \
384	    $(SHELL) ./config.status;; \
385	  *) \
386	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
387	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
388	esac;
389
390$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
391	$(SHELL) ./config.status --recheck
392
393$(top_srcdir)/configure:  $(am__configure_deps)
394	$(am__cd) $(srcdir) && $(AUTOCONF)
395$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
396	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
397$(am__aclocal_m4_deps):
398
399config.h: stamp-h1
400	@if test ! -f $@; then rm -f stamp-h1; else :; fi
401	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
402
403stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
404	@rm -f stamp-h1
405	cd $(top_builddir) && $(SHELL) ./config.status config.h
406$(srcdir)/config.h.in:  $(am__configure_deps) 
407	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
408	rm -f stamp-h1
409	touch $@
410
411distclean-hdr:
412	-rm -f config.h stamp-h1
413
414mostlyclean-libtool:
415	-rm -f *.lo
416
417clean-libtool:
418	-rm -rf .libs _libs
419
420distclean-libtool:
421	-rm -f libtool config.lt
422
423# This directory's subdirectories are mostly independent; you can cd
424# into them and run 'make' without going through this Makefile.
425# To change the values of 'make' variables: instead of editing Makefiles,
426# (1) if the variable is set in 'config.status', edit 'config.status'
427#     (which will cause the Makefiles to be regenerated when you run 'make');
428# (2) otherwise, pass the desired values on the 'make' command line.
429$(am__recursive_targets):
430	@fail=; \
431	if $(am__make_keepgoing); then \
432	  failcom='fail=yes'; \
433	else \
434	  failcom='exit 1'; \
435	fi; \
436	dot_seen=no; \
437	target=`echo $@ | sed s/-recursive//`; \
438	case "$@" in \
439	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
440	  *) list='$(SUBDIRS)' ;; \
441	esac; \
442	for subdir in $$list; do \
443	  echo "Making $$target in $$subdir"; \
444	  if test "$$subdir" = "."; then \
445	    dot_seen=yes; \
446	    local_target="$$target-am"; \
447	  else \
448	    local_target="$$target"; \
449	  fi; \
450	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
451	  || eval $$failcom; \
452	done; \
453	if test "$$dot_seen" = "no"; then \
454	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
455	fi; test -z "$$fail"
456
457ID: $(am__tagged_files)
458	$(am__define_uniq_tagged_files); mkid -fID $$unique
459tags: tags-recursive
460TAGS: tags
461
462tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
463	set x; \
464	here=`pwd`; \
465	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
466	  include_option=--etags-include; \
467	  empty_fix=.; \
468	else \
469	  include_option=--include; \
470	  empty_fix=; \
471	fi; \
472	list='$(SUBDIRS)'; for subdir in $$list; do \
473	  if test "$$subdir" = .; then :; else \
474	    test ! -f $$subdir/TAGS || \
475	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
476	  fi; \
477	done; \
478	$(am__define_uniq_tagged_files); \
479	shift; \
480	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
481	  test -n "$$unique" || unique=$$empty_fix; \
482	  if test $$# -gt 0; then \
483	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
484	      "$$@" $$unique; \
485	  else \
486	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
487	      $$unique; \
488	  fi; \
489	fi
490ctags: ctags-recursive
491
492CTAGS: ctags
493ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
494	$(am__define_uniq_tagged_files); \
495	test -z "$(CTAGS_ARGS)$$unique" \
496	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
497	     $$unique
498
499GTAGS:
500	here=`$(am__cd) $(top_builddir) && pwd` \
501	  && $(am__cd) $(top_srcdir) \
502	  && gtags -i $(GTAGS_ARGS) "$$here"
503cscope: cscope.files
504	test ! -s cscope.files \
505	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
506clean-cscope:
507	-rm -f cscope.files
508cscope.files: clean-cscope cscopelist
509cscopelist: cscopelist-recursive
510
511cscopelist-am: $(am__tagged_files)
512	list='$(am__tagged_files)'; \
513	case "$(srcdir)" in \
514	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
515	  *) sdir=$(subdir)/$(srcdir) ;; \
516	esac; \
517	for i in $$list; do \
518	  if test -f "$$i"; then \
519	    echo "$(subdir)/$$i"; \
520	  else \
521	    echo "$$sdir/$$i"; \
522	  fi; \
523	done >> $(top_builddir)/cscope.files
524
525distclean-tags:
526	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
527	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
528
529distdir: $(DISTFILES)
530	$(am__remove_distdir)
531	test -d "$(distdir)" || mkdir "$(distdir)"
532	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
533	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
534	list='$(DISTFILES)'; \
535	  dist_files=`for file in $$list; do echo $$file; done | \
536	  sed -e "s|^$$srcdirstrip/||;t" \
537	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
538	case $$dist_files in \
539	  */*) $(MKDIR_P) `echo "$$dist_files" | \
540			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
541			   sort -u` ;; \
542	esac; \
543	for file in $$dist_files; do \
544	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
545	  if test -d $$d/$$file; then \
546	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
547	    if test -d "$(distdir)/$$file"; then \
548	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
549	    fi; \
550	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
551	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
552	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
553	    fi; \
554	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
555	  else \
556	    test -f "$(distdir)/$$file" \
557	    || cp -p $$d/$$file "$(distdir)/$$file" \
558	    || exit 1; \
559	  fi; \
560	done
561	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
562	  if test "$$subdir" = .; then :; else \
563	    $(am__make_dryrun) \
564	      || test -d "$(distdir)/$$subdir" \
565	      || $(MKDIR_P) "$(distdir)/$$subdir" \
566	      || exit 1; \
567	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
568	    $(am__relativize); \
569	    new_distdir=$$reldir; \
570	    dir1=$$subdir; dir2="$(top_distdir)"; \
571	    $(am__relativize); \
572	    new_top_distdir=$$reldir; \
573	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
574	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
575	    ($(am__cd) $$subdir && \
576	      $(MAKE) $(AM_MAKEFLAGS) \
577	        top_distdir="$$new_top_distdir" \
578	        distdir="$$new_distdir" \
579		am__remove_distdir=: \
580		am__skip_length_check=: \
581		am__skip_mode_fix=: \
582	        distdir) \
583	      || exit 1; \
584	  fi; \
585	done
586	$(MAKE) $(AM_MAKEFLAGS) \
587	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
588	  dist-hook
589	-test -n "$(am__skip_mode_fix)" \
590	|| find "$(distdir)" -type d ! -perm -755 \
591		-exec chmod u+rwx,go+rx {} \; -o \
592	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
593	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
594	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
595	|| chmod -R a+r "$(distdir)"
596dist-gzip: distdir
597	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
598	$(am__post_remove_distdir)
599dist-bzip2: distdir
600	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
601	$(am__post_remove_distdir)
602
603dist-lzip: distdir
604	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
605	$(am__post_remove_distdir)
606
607dist-xz: distdir
608	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
609	$(am__post_remove_distdir)
610
611dist-tarZ: distdir
612	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
613	$(am__post_remove_distdir)
614
615dist-shar: distdir
616	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
617	$(am__post_remove_distdir)
618
619dist-zip: distdir
620	-rm -f $(distdir).zip
621	zip -rq $(distdir).zip $(distdir)
622	$(am__post_remove_distdir)
623
624dist dist-all:
625	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
626	$(am__post_remove_distdir)
627
628# This target untars the dist file and tries a VPATH configuration.  Then
629# it guarantees that the distribution is self-contained by making another
630# tarfile.
631distcheck: dist
632	case '$(DIST_ARCHIVES)' in \
633	*.tar.gz*) \
634	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
635	*.tar.bz2*) \
636	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
637	*.tar.lz*) \
638	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
639	*.tar.xz*) \
640	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
641	*.tar.Z*) \
642	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
643	*.shar.gz*) \
644	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
645	*.zip*) \
646	  unzip $(distdir).zip ;;\
647	esac
648	chmod -R a-w $(distdir)
649	chmod u+w $(distdir)
650	mkdir $(distdir)/_build $(distdir)/_inst
651	chmod a-w $(distdir)
652	test -d $(distdir)/_build || exit 0; \
653	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
654	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
655	  && am__cwd=`pwd` \
656	  && $(am__cd) $(distdir)/_build \
657	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
658	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
659	    $(DISTCHECK_CONFIGURE_FLAGS) \
660	  && $(MAKE) $(AM_MAKEFLAGS) \
661	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
662	  && $(MAKE) $(AM_MAKEFLAGS) check \
663	  && $(MAKE) $(AM_MAKEFLAGS) install \
664	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
665	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
666	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
667	        distuninstallcheck \
668	  && chmod -R a-w "$$dc_install_base" \
669	  && ({ \
670	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
671	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
672	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
673	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
674	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
675	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
676	  && rm -rf "$$dc_destdir" \
677	  && $(MAKE) $(AM_MAKEFLAGS) dist \
678	  && rm -rf $(DIST_ARCHIVES) \
679	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
680	  && cd "$$am__cwd" \
681	  || exit 1
682	$(am__post_remove_distdir)
683	@(echo "$(distdir) archives ready for distribution: "; \
684	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
685	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
686distuninstallcheck:
687	@test -n '$(distuninstallcheck_dir)' || { \
688	  echo 'ERROR: trying to run $@ with an empty' \
689	       '$$(distuninstallcheck_dir)' >&2; \
690	  exit 1; \
691	}; \
692	$(am__cd) '$(distuninstallcheck_dir)' || { \
693	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
694	  exit 1; \
695	}; \
696	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
697	   || { echo "ERROR: files left after uninstall:" ; \
698	        if test -n "$(DESTDIR)"; then \
699	          echo "  (check DESTDIR support)"; \
700	        fi ; \
701	        $(distuninstallcheck_listfiles) ; \
702	        exit 1; } >&2
703distcleancheck: distclean
704	@if test '$(srcdir)' = . ; then \
705	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
706	  exit 1 ; \
707	fi
708	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
709	  || { echo "ERROR: files left in build directory after distclean:" ; \
710	       $(distcleancheck_listfiles) ; \
711	       exit 1; } >&2
712check-am: all-am
713check: check-recursive
714all-am: Makefile config.h
715installdirs: installdirs-recursive
716installdirs-am:
717install: install-recursive
718install-exec: install-exec-recursive
719install-data: install-data-recursive
720uninstall: uninstall-recursive
721
722install-am: all-am
723	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
724
725installcheck: installcheck-recursive
726install-strip:
727	if test -z '$(STRIP)'; then \
728	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
729	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
730	      install; \
731	else \
732	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
733	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
734	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
735	fi
736mostlyclean-generic:
737
738clean-generic:
739
740distclean-generic:
741	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
742	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
743
744maintainer-clean-generic:
745	@echo "This command is intended for maintainers to use"
746	@echo "it deletes files that may require special tools to rebuild."
747	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
748clean: clean-recursive
749
750clean-am: clean-generic clean-libtool mostlyclean-am
751
752distclean: distclean-recursive
753	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
754	-rm -f Makefile
755distclean-am: clean-am distclean-generic distclean-hdr \
756	distclean-libtool distclean-tags
757
758dvi: dvi-recursive
759
760dvi-am:
761
762html: html-recursive
763
764html-am:
765
766info: info-recursive
767
768info-am:
769
770install-data-am:
771
772install-dvi: install-dvi-recursive
773
774install-dvi-am:
775
776install-exec-am:
777
778install-html: install-html-recursive
779
780install-html-am:
781
782install-info: install-info-recursive
783
784install-info-am:
785
786install-man:
787
788install-pdf: install-pdf-recursive
789
790install-pdf-am:
791
792install-ps: install-ps-recursive
793
794install-ps-am:
795
796installcheck-am:
797
798maintainer-clean: maintainer-clean-recursive
799	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
800	-rm -rf $(top_srcdir)/autom4te.cache
801	-rm -f Makefile
802maintainer-clean-am: distclean-am maintainer-clean-generic
803
804mostlyclean: mostlyclean-recursive
805
806mostlyclean-am: mostlyclean-generic mostlyclean-libtool
807
808pdf: pdf-recursive
809
810pdf-am:
811
812ps: ps-recursive
813
814ps-am:
815
816uninstall-am:
817
818.MAKE: $(am__recursive_targets) all install-am install-strip
819
820.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
821	am--refresh check check-am clean clean-cscope clean-generic \
822	clean-libtool cscope cscopelist-am ctags ctags-am dist \
823	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
824	dist-tarZ dist-xz dist-zip distcheck distclean \
825	distclean-generic distclean-hdr distclean-libtool \
826	distclean-tags distcleancheck distdir distuninstallcheck dvi \
827	dvi-am html html-am info info-am install install-am \
828	install-data install-data-am install-dvi install-dvi-am \
829	install-exec install-exec-am install-html install-html-am \
830	install-info install-info-am install-man install-pdf \
831	install-pdf-am install-ps install-ps-am install-strip \
832	installcheck installcheck-am installdirs installdirs-am \
833	maintainer-clean maintainer-clean-generic mostlyclean \
834	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
835	tags tags-am uninstall uninstall-am
836
837.PHONY: ChangeLog INSTALL
838
839INSTALL:
840	$(INSTALL_CMD)
841
842ChangeLog:
843	$(CHANGELOG_CMD)
844
845dist-hook: ChangeLog INSTALL
846
847# Tell versions [3.59,3.63) of GNU make to not export all variables.
848# Otherwise a system limit (for SysV at least) may be exceeded.
849.NOEXPORT:
850