ChangeLog revision 34a0776d
1commit 0e94cd85b2fa1501d4d883de3c97074c5ea5c373 2Author: Thomas Hellstrom <thellstrom@vmware.com> 3Date: Wed Nov 16 11:22:53 2016 +0700 4 5 Bump minor for release. 6 7 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 8 9commit 3fd542b0394f9ab198b7750409ec2c0f16eb59da 10Author: Thomas Hellstrom <thellstrom@vmware.com> 11Date: Wed Nov 16 11:35:58 2016 +0700 12 13 vmware/vmwgfx: Add a missing source file for distribution 14 15 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 16 Reviewed-by: Sinclair Yeh <syeh@vmware.com> 17 (cherry picked from commit fade4f46e84e93153edc3472abb73635f87555e6) 18 19commit e53a7e42eb7597808a364f230a97ce64481f084b 20Author: Hans de Goede <hdegoede@redhat.com> 21Date: Thu Sep 29 19:37:22 2016 +0200 22 23 Adapt Block/WakeupHandler signature for ABI 23 24 25 Signed-off-by: Hans de Goede <hdegoede@redhat.com> 26 Acked-by: Thomas Hellstrom <thellstrom@vmware.com> 27 (cherry picked from commit d64d01c7a599dc3c79125701f076a3e459cefdc2) 28 29commit 0bcd4df1843f00f8e8507750401ec2a2a29330dc 30Author: Thomas Hellstrom <thellstrom@vmware.com> 31Date: Thu Feb 11 09:45:58 2016 +0100 32 33 vmware: Bump minor to signal availability of new features 34 35 While this may never be an official release, bump minor to enable the 36 new resolutionKMS functionality. This signals the availability of 37 autolayout and resolutionKMS support. 38 39 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 40 Reviewed-by: Brian Paul <brianp@vmware.com> 41 42commit 5036e9d11a899d831b1471f64132eefcf459b222 43Author: Thomas Hellstrom <thellstrom@vmware.com> 44Date: Thu Feb 11 09:40:55 2016 +0100 45 46 vmware/vmwgfx: Don't require screen objects to run 47 48 Using the vmwgfx ldu backend works just as fine except that we're limited 49 to implicit layout placement. 50 51 With this test on, we may end up in the odd situation that the vmwgfx kernel 52 module and the vwmare legacy Xorg driver are enabled simultaneously, and that 53 is an unsupported configuration. It will also break resolutionKMS which will 54 be enabled based on vmwgfx version but should be disabled since the legacy 55 Xorg driver runs... 56 57 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 58 Reviewed-by: Brian Paul <brianp@vmware.com> 59 60commit 57d4499cc252bd1c3362a569ca7fd99ba6b645ed 61Author: Thomas Hellstrom <thellstrom@vmware.com> 62Date: Wed Jan 20 19:08:21 2016 +0100 63 64 vmware/vmwgfx: Disable autolayout if we detect an old resolutionset 65 66 While the autolayout feature should really avoid races both with the old 67 resolutionSet RandR12 code and with new compositor layout code, let's 68 disable the autolayout feature if someone tries to set the 69 layout / resolution through the vmwarectrl interface. 70 That's most likely an old resolutionSet. 71 72 Autolayout is turned on on each new screen generation. 73 74 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 75 Reviewed-by: Sinclair Yeh <syeh@vmware.com> 76 77commit 48fb82f13ca290e9fbb8c7f79aba5ee119a3ce7f 78Author: Thomas Hellstrom <thellstrom@vmware.com> 79Date: Wed Jan 20 14:21:40 2016 +0100 80 81 vmware/vmwgfx: Read the implicit output status from KMS if available. 82 83 This information is used to switch to software cursors if we have 84 multiple overlapping explicit outputs and thus might need to display 85 two cursors simultaneously. 86 87 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 88 Reviewed-by: Sinclair Yeh <syeh@vmware.com> 89 90commit a81e359d88151159e3a19ceb95027029fef0a9ba 91Author: Thomas Hellstrom <thellstrom@vmware.com> 92Date: Wed Jan 20 14:04:13 2016 +0100 93 94 vmware/vmwgfx: Avoid filling the log with modeline printouts 95 96 There are specific debug options for that. 97 98 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 99 Reviewed-by: Sinclair Yeh <syeh@vmware.com> 100 101commit 5978597da92898a424837ee89e66f66a8120480c 102Author: Thomas Hellstrom <thellstrom@vmware.com> 103Date: Wed Jan 20 13:01:21 2016 +0100 104 105 vmware/vmwgfx: Add a layout handler v2 106 107 Add a handler that, on hotplug events, scans for a new GUI layout and 108 tries to set that layout using XRandR similar to what the RandR1.2 part of 109 vmware tools resolutionSet module is doing today. 110 111 v2: Address review comments 112 - Keep the old layout in case of screen resizing errors 113 - Fix the vmwgfx_layout handler() declaration. 114 115 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 116 Reviewed-by: Sinclair Yeh <syeh@vmware.com> 117 118commit 885e360b16fd88b48b40930c6277637615aab188 119Author: Thomas Hellstrom <thellstrom@vmware.com> 120Date: Wed Jan 20 12:09:22 2016 +0100 121 122 vmware/vmwgfx: Update RandR output properties on hotplug events v2 123 124 Update also RandR output properties when we receive hotplug events; 125 the RRGetInfo function doesn't do this. 126 127 This makes sure RandR sends out property change events to clients. 128 Also remove some debugging printouts. 129 130 v2: Address review comment from Sinclair Yeh; 131 make sure struct output_private::drm_connector is always valid. 132 133 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 134 Reviewed-by: Sinclair Yeh <syeh@vmware.com> 135 136commit ada41a5988df8414011ed37ec51cbb402c9c8716 137Author: Thomas Hellstrom <thellstrom@vmware.com> 138Date: Wed Jan 20 11:51:46 2016 +0100 139 140 vmware/vmwgfx: Add missing includes of the config.h header. 141 142 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 143 Reviewed-by: Sinclair Yeh <syeh@vmware.com> 144 145commit 755e38f373a511bd774a61c9420a67f630f71037 146Author: Thomas Hellstrom <thellstrom@vmware.com> 147Date: Thu Dec 18 10:46:42 2014 +0100 148 149 vmware/vmwgfx: Expose kernel connector attributes and react to hotplug events 150 151 Much of this code is borrowed from the xf86-video-modesetting driver. 152 153 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 154 Reviewed-by: Sinclair Yeh <syeh@vmware.com> 155 156commit 1e443c4717a8b107c0c9283e222482703ac0f358 157Author: Thomas Hellstrom <thellstrom@vmware.com> 158Date: Wed Feb 25 01:51:11 2015 -0800 159 160 vmware/vmwgfx: Try to use only_hw_present semantics if screen targets are enabled 161 162 If screen targets are enabled and there is a reasonable chance that the vmwgfx 163 drm driver can use the surface backing a pixmap as a screen target surface, 164 then make that surface a modesetting framebuffer rather than the corresponding 165 DMA buffer. In practice this applies when we start scanning out from the 166 origin (0,0) of the pixmap. However, we would also like to apply the constraint 167 that the scanout area is the entire pixmap, since that is the constraint used 168 by the drm driver, but that would currently require drm framebuffer 169 reallocations and possible flicker, so disable that for now. The drm driver 170 will correctly handle the possibly oversized surface handed to it anyway, and 171 the cost we pay for this is an extra hardware copy of the dirtied area when 172 doing a software update of the scanout. 173 174 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 175 Reviewed-by: Sinclair Yeh <syeh@vmware.com> 176 177commit 8f0cf7c03597532feb1a8ccf3bb1cafcd6170f89 178Author: Thomas Klausner <wiz@NetBSD.org> 179Date: Sun Aug 10 11:04:51 2014 +0200 180 181 Add 2560x1440 to supported resolutions. 182 183 Native resolution on iMac 27". 184 Reported missing by Benjamin Lorenz in 185 http://gnats.netbsd.org/49094 186 187 Signed-off-by: Thomas Klausner <wiz@NetBSD.org> 188 Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> 189 190commit ab5be2312023d8ccc7156a05ccc1b0abe7679244 191Author: Adam Jackson <ajax@redhat.com> 192Date: Thu Dec 4 10:35:04 2014 -0500 193 194 saa: Adapt to GC client clip changes in xserver 1.17 195 196 1.17 always stores the client clip as a region, so there's no longer a 197 clientClipType member to look at. Change the code to just inspect 198 whether the clientClip is non-null, since that works both before and 199 after 1.17. 200 201 Signed-off-by: Adam Jackson <ajax@redhat.com> 202 Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> 203 204commit 3f7defa8dc595342e2502206ed2006f2be20a884 205Author: Thomas Hellstrom <thellstrom@vmware.com> 206Date: Mon Nov 17 19:18:15 2014 +0100 207 208 vmware/vmwgfx: Make large Xv video blits cheaper 209 210 As screens grow larger, attempt to make large Xv video blits cheaper by 211 performing the color conversion and scaling in two steps: 212 213 1) Color conversion which has a 4x4 matrix multiplication shader is performed 214 to a bounce buffer the size of which is never larger than the source image. 215 2) Scaling is performed as a src composite blit to the destination image with 216 a simple copy shader. 217 218 This split is done only if the destination image is substantially larger than 219 the source image / bounce buffer 220 221 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 222 Reviewed-by: Sinclair Yeh <syeh@vmware.com> 223 224commit 4664412d7a5266d2b392957406b34abc5db95e48 225Author: Stefan Dirsch <sndirsch@suse.de> 226Date: Tue Oct 7 11:29:32 2014 +0200 227 228 xf86xv.h cannot be included without first including xorg-server.h. 229 230 Without this the build fails on systems with the latest glibc, 231 throwing this error: 232 233 In file included from /usr/include/string.h:634:0, 234 from /usr/include/xorg/os.h:53, 235 from /usr/include/xorg/misc.h:115, 236 from /usr/include/xorg/screenint.h:50, 237 from /usr/include/xorg/scrnintstr.h:50, 238 from /usr/include/xorg/xvdix.h:55, 239 from /usr/include/xorg/xf86xv.h:32, 240 from vmwgfx_overlay.c:38: 241 /usr/include/xorg/os.h:579:1: error: expected identifier or '(' before '__extension__' 242 strndup(const char *str, size_t n); 243 244 This is caused by HAVE_STRNDUP not being set (it is set from xorg-server.h), 245 causing os.h to redefine it. 246 247 Signed-off-by: Stefan Dirsch <sndirsch@suse.de> 248 Reviewed-by: Daniel Stone <daniels@collabora.com> 249 Acked-by: Thomas Hellstrom <thellstrom@vmware.com> 250 251commit 8e1c4e5bd521ec2d4f1a21da432f110c606b3fde 252Author: Thomas Hellstrom <thellstrom@vmware.com> 253Date: Mon Sep 22 12:09:13 2014 +0200 254 255 vmware/saa: Fix saa_check_poly_fill_rect_noreadback v2 256 257 We were not clipping the dirty region correctly, Fix this. 258 Also actually do what the comment in the function says: If there are more than 259 an ad-hoc number of rectangles to read back, then revert to the default 260 saa_check_poly_fill_rect function that reads back the whole damage region. 261 262 v2: Fix commit log message. 263 264 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 265 Reviewed-by: Brian Paul <brianp@vmware.com> 266 Reviewed-by: Sinclair Yeh <syeh@vmware.com> 267 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 268 269commit c23fd33d8ce8491891255d93c04e053bf333bd4e 270Author: Thomas Hellstrom <thellstrom@vmware.com> 271Date: Mon Sep 22 11:43:02 2014 +0200 272 273 vmware/saa: Fix saa_check_copy_window dirty region v3 274 275 The saa_check_copy_window could dirty regions that were never touched, since 276 we were using the X server provided damage region rather than the more 277 detailed region actually copied. This would have been OK if we had first done 278 a read-back of the region to be dirtied, but since we want to avoid that, 279 instead compute the detailed destination region and use that for dirtying. 280 281 This fixes rendering glitches seen with motif applications. 282 283 v2: Fix whitespace error. 284 v3: Move dirty region computation. 285 286 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 287 Reviewed-by: Brian Paul <brianp@vmware.com> 288 Reviewed-by: Sinclair Yeh <syeh@vmware.com> 289 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 290 291commit f86434ac69bd288c7fba65d178c22a91a0f4f6c2 292Author: Thomas Hellstrom <thellstrom@vmware.com> 293Date: Mon Sep 15 15:13:53 2014 +0200 294 295 Revert "vmware/saa: Disable the noreadback polyfillrect optimization" 296 297 This reverts commit 88c487cb19aaf2882d582f7f887a52935ef8d92e. 298 299 While the commit made the rendering artefacts less frequent, they didn't 300 disappear completely and are likely caused by something else, so revert this 301 commit. 302 303 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 304 Acked-by: Sinclair Yeh <syeh@vmware.com> 305 306commit 8545a166931617af0d2a9ca8175fd8b11c67e246 307Author: Thomas Hellstrom <thellstrom@vmware.com> 308Date: Tue Sep 9 01:59:07 2014 -0700 309 310 vmware/vmwgfx: Fix cursor problem with multimon 311 312 In a multimon environment, the cursor would sometimes disappear on the 313 newly enabled screen. Fix this. 314 315 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 316 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 317 318commit 32562129750077a23f26f2e69adc8403eb24bf3f 319Author: Thomas Hellstrom <thellstrom@vmware.com> 320Date: Wed Sep 3 07:08:41 2014 -0700 321 322 vmware/vmwgfx: Don't add pixmaps to the pixmap list if they're already on it 323 324 This could cause loops through the list to spin indefinitely. 325 This would most likely occur at VT switches. 326 327 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 328 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 329 330commit 8b6316a312689d83ca8f8de939698bc137206f58 331Author: Thomas Hellstrom <thellstrom@vmware.com> 332Date: Thu Aug 28 15:32:45 2014 +0200 333 334 vmware/legacy: Fix overlay related compile breakage on earlier X servers 335 336 Introduced by commit: 337 vmware/legacy: Apply same fix to auto colrkey fill 338 339 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 340 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 341 342commit 8a47e9a45036005d46a60cf8df366baffcb9a8d1 343Author: Thomas Hellstrom <thellstrom@vmware.com> 344Date: Thu Aug 28 13:43:03 2014 +0200 345 346 vmware: Fix bootstrap related compile errors on earlier X servers 347 348 Introduced by commit 349 Add support for XSERVER_PLATFORM_BUS 350 351 Note that the vmware DriverRec declaration can be cleaned up 352 considerably using C99 designated initializers. Perhaps something for 353 the next release... 354 355 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 356 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 357 358commit f5d8c8f1fe2de727018600f471b6a8829fe492ad 359Author: Thomas Hellstrom <thellstrom@vmware.com> 360Date: Wed Aug 20 13:02:58 2014 +0200 361 362 vmware: Clear the PITCHLOCK register if available before modeset 363 364 In some situations the fbdev driver may have set this register before legacy 365 driver startup causing a weird-looking desktop. Make sure this register 366 is cleared on each modeset. 367 368 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 369 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 370 371commit b1697434348799b0808a6c9e9a899394075b980c 372Author: Jakob Bornecrantz <jakob@vmware.com> 373Date: Thu Aug 14 16:42:05 2014 +0200 374 375 vmware/legacy: Fix out of bound array indexing 376 377 Spotted by coverity. 378 379 Reported-by: Adam Jackson <ajax@redhat.com> 380 Reviewed-by: Adam Jackson <ajax@redhat.com> 381 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 382 383commit 0825d98744b20a20af7bd81d347334ab4a1de015 384Author: Jakob Bornecrantz <jakob@vmware.com> 385Date: Sat Aug 9 00:19:17 2014 +0200 386 387 vmware/vmwgfx: Fix compilation issue on older X servers 388 389 Introduced in 268307 "Add support for server managed fds" 390 391 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 392 Reviewed-by: Brian Paul <brianp@vmware.com> 393 394commit 0a212afefd8670a1823c9b6474de8bf26d33bdeb 395Author: Jakob Bornecrantz <jakob@vmware.com> 396Date: Fri Aug 8 21:37:38 2014 +0200 397 398 vmware/legacy: Fix uninitialized values in video commands 399 400 Fixed bug where video stopped working on systems that didn't have the new kms 401 enabled kernel driver installed. Found on CentOS 6.4. 402 403 After updating the register header SVGA_VIDEO_NUM_REGS value got upped by two 404 in order to support GMR and Screen Objects. Since this path is mostly used 405 on older hosts that may not support them, don't send them at all. 406 407 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 408 Reviewed-by: Brian Paul <brianp@vmware.com> 409 410commit 0a596fd0c92fdcf73071869a59029263a2596018 411Author: Thomas Hellstrom <thellstrom@vmware.com> 412Date: Wed Jul 2 14:21:45 2014 +0200 413 414 vmware/vmwgfx: Fix an error path segfault 415 416 Part of freedesktop.org bugzilla bug #80645 417 If taking a scanout reference on a pixmap fails, the 418 struct vmwgfx_screen_entry::pixmap pointer must be set to NULL, otherwise 419 the driver will incorrectly attempt to remove the scanout reference in the 420 error path, causing a segfault. 421 422 This problem is seen in the above-mentioned bug, but it is not the root 423 cause of the problem. With this patch applied, the server will terminate 424 cleanly instead of segfaulting. 425 426 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 427 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 428 429commit 4e378a730d2d2deffc915af2a3d013d2a994a1b0 430Author: Jakob Bornecrantz <jakob@vmware.com> 431Date: Wed May 21 11:52:29 2014 +0200 432 433 vmware/legacy: Apply same fix to auto colorkey fill 434 435 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 436 Reviewed-by: Thomas Hellström <thellstrom@vmware.com> 437 438commit 82c9b0c1d34459c568d004521e3f35a69f5d7ae3 439Author: Jakob Bornecrantz <jakob@vmware.com> 440Date: Wed May 21 11:51:46 2014 +0200 441 442 vmware/vmwgfx: Fix auto colorkey fill usage 443 444 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 445 Reviewed-by: Thomas Hellström <thellstrom@vmware.com> 446 447commit 43e043868fbd74e28cd392a3665b36abdfe87de0 448Author: Jakob Bornecrantz <jakob@vmware.com> 449Date: Wed May 21 11:54:48 2014 +0200 450 451 vmware/vmwgfx: A bit more error logging when handling cursors 452 453 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 454 Reviewed-by: Thomas Hellström <thellstrom@vmware.com> 455 456commit aa7309254808e27a4ac5d3dc674be179646280b5 457Author: Jakob Bornecrantz <jakob@vmware.com> 458Date: Wed May 21 11:54:24 2014 +0200 459 460 vmware/vmwgfx: Don't move cursors without images 461 462 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 463 Reviewed-by: Thomas Hellström <thellstrom@vmware.com> 464 465commit e8d6facf34adf1c601a3afd0a984ce90ad8fe059 466Author: Thomas Hellstrom <thellstrom@vmware.com> 467Date: Tue May 20 06:29:19 2014 -0700 468 469 vmware/vmwgfx: Fix xwayland build on newer XA versions 470 471 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 472 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 473 474commit 268307e85c06be27345a6808bcf2b3c9887bf8bc 475Author: Hans de Goede <hdegoede@redhat.com> 476Date: Tue May 6 16:33:21 2014 +0200 477 478 Add support for server managed fds 479 480 Signed-off-by: Hans de Goede <hdegoede@redhat.com> 481 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 482 483commit 675fe58eee8acdb302c3501236b86a3289991053 484Author: Hans de Goede <hdegoede@redhat.com> 485Date: Tue May 6 16:00:50 2014 +0200 486 487 Add support for XSERVER_PLATFORM_BUS 488 489 This is a preparation patch for adding support for server managed fds. 490 491 Signed-off-by: Hans de Goede <hdegoede@redhat.com> 492 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 493 494commit 88c487cb19aaf2882d582f7f887a52935ef8d92e 495Author: Thomas Hellstrom <thellstrom@vmware.com> 496Date: Fri May 9 09:35:59 2014 +0200 497 498 vmware/saa: Disable the noreadback polyfillrect optimization 499 500 It causes rendering artefacts with some motif applications due to 501 damage area confusion. Until that is sorted out, temporarily disable the 502 optimization. 503 504 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 505 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 506 507commit f31eed4a578784329a7038aa01acaa10a2d0c246 508Author: Thomas Hellstrom <thellstrom@vmware.com> 509Date: Thu May 8 09:24:04 2014 +0200 510 511 vmware/vmwgfx: Fix initial dirty region for pixmaps 512 513 When storage is attached to pixmaps for the first time the dirty region is 514 set to cover either the hardware surface or the software buffer based on 515 the presence of the hardware surface. 516 517 However, if the storage was created as part of an accelerated operation, 518 the dirty region was assigned before the hardware surface was assigned to the 519 pixmap, causing the dirty region to incorrectly cover the software buffer. 520 521 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 522 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 523 524commit 1ed14687a3f1092db8504fb9cf4f446451801665 525Author: Thomas Hellstrom <thellstrom@vmware.com> 526Date: Thu Apr 10 14:05:24 2014 +0200 527 528 vmware/vmwgfx: Set desired modes after xMir screen init 529 530 While XMir does initial mode configuration, it leaves setting initial 531 modes to the DDX driver. 532 533 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 534 Reviewed-by: Brian Paul <brianp@vmware.com> 535 536commit 64e0faf1480663a990e0f6aeef7af0e69845af49 537Author: Thomas Hellstrom <thellstrom@vmware.com> 538Date: Wed Apr 2 14:05:23 2014 +0200 539 540 vmware/vmwgfx: Don't tell XA that we have a mask when we haven't 541 542 In some cases, the X server sends us a composit operation with 543 mask_pict != NULL, but mask_pix == NULL. Assume there's no mask 544 involved in that case. 545 546 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 547 Reviewed-by: Brian Paul <brianp@vmware.com> 548 549commit c062d08a50a26c99a3b8f565a8b2b00e8dc21c3f 550Author: Thomas Hellstrom <thellstrom@vmware.com> 551Date: Thu Jan 16 18:27:57 2014 +0100 552 553 vmware/vmwgfx: Don't change backing-store of active scanout surfaces 554 555 With option "HwPresents" on, the driver would sometimes change backing 556 store of active scanout surfaces, making the kernel module refuse to 557 present. This was caused by scanout surfaces not having the RENDERTARGET flag 558 on by default. So when rendered to, using copies or composites, they 559 would be reallocated. Fix this by adding the RENDERTARGET flag from start. 560 561 Also add code that prints out an error message when we change backing store 562 of active scanout surfaces 563 564 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 565 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 566 567commit c42e1f750629f18144d065b8bba5e2eaf6cbf675 568Author: Julien Cristau <jcristau@debian.org> 569Date: Tue Apr 1 10:11:13 2014 +0200 570 571 configure: fix build without xatracker 572 573 ACTION-IF-NOT-FOUND is the fourth argument to PKG_CHECK_MODULES, not the 574 fifth. 575 576 Debian bug#743239 <https://bugs.debian.org/743239> 577 578 Reviewed-by: Thomas Klausner <wiz@NetBSD.org> 579 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 580 Signed-off-by: Julien Cristau <jcristau@debian.org> 581 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 582 583commit cbd56b3759f01ec18ae0705d023e4c0b2ab38c25 584Author: Jakob Bornecrantz <jakob@vmware.com> 585Date: Wed Mar 26 12:45:52 2014 +0100 586 587 Bump the version number to 13.0.2 588 589 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 590 591commit 51cdfa6f5102bde92c98630ace6650e4b286f6e2 592Author: Jakob Bornecrantz <jakob@vmware.com> 593Date: Fri Feb 21 18:10:07 2014 +0100 594 595 vmware: Fix compilation on newer X servers 596 597 Found by Bryan Lee. Later versions of X.org turns dispMode pointers 598 into const upsetting gcc, turn them into size_t's instead. 599 600 Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> 601 602commit 8da981712f62050076cff53e1b40ed1e307fcca8 603Author: Thomas Hellstrom <thellstrom@vmware.com> 604Date: Wed Jan 15 11:04:05 2014 +0100 605 606 vmware/vmwgfx: Always allocate shared hardware surfaces. 607 608 Hardware surfaces are all likely to be shared at some point, and we *really* 609 don't want to change a hardware surface that is bound as a drm framebuffer. 610 611 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 612 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 613 614commit 31bff9f7f3d9a68fd1449532e8ab50065de63857 615Author: Thomas Hellstrom <thellstrom@vmware.com> 616Date: Thu Jan 9 13:53:59 2014 +0100 617 618 vmware: Require libdrm 2.4.38 to build XMir. 619 620 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 621 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 622 623commit d6b179a5addef6456325adf241eb8dcaf8e4c3d6 624Author: Thomas Hellstrom <thellstrom@vmware.com> 625Date: Thu Jan 9 13:28:22 2014 +0100 626 627 vmware: Fix build errors and warnings 628 629 A previous commit and the hosted merge unfortunately brought in some build 630 errors / warnings on early X servers. 631 632 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 633 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 634 635commit f37684e7169b9c0ab23ff748d5acacb65fad82f7 636Author: Thomas Hellstrom <thellstrom@vmware.com> 637Date: Tue Jan 7 17:55:49 2014 +0100 638 639 vmwgfx: Block DMA to prime surfaces for now 640 641 Since there is currently no _good_ way to get the surface format of a 642 prime surface, we block DMA to these surfaces; we don't know if our 643 software data is compatible with the surface format. 644 645 This patch also makes sure that there is a hardware surface backing the 646 drawable we copy from. 647 648 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 649 Reviewed-by: Brian Paul <brianp@vmware.com> 650 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 651 652commit 97ce302ddd6e86397ea56ea9089b9549af73c3ac 653Author: Thomas Hellstrom <thellstrom@vmware.com> 654Date: Mon Jan 6 12:37:36 2014 +0100 655 656 vmwgfx: Enable direct dmas 657 658 Enable direct dmas instead of using the xa-provided dma functionality. 659 This saves a bounce-buffer software copy of all dma'd contents. 660 661 This also implies that all drawables with mixed software / hardware contents 662 will use a kernel buffer for software rendering. 663 664 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 665 Reviewed-by: Brian Paul <brianp@vmware.com> 666 667commit fd636e39a3f32a6dcd107c370513d8cb9aae26c2 668Author: Thomas Hellstrom <thellstrom@vmware.com> 669Date: Mon Dec 16 06:21:09 2013 -0800 670 671 vmwgfx: Add support for XWayland 672 673 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 674 Reviewed-by: Brian Paul <brianp@vmware.com> 675 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 676 677commit c020923597d3bc30dffa89ba0a47f3b9517dd5fb 678Author: Thomas Hellstrom <thellstrom@vmware.com> 679Date: Mon Dec 16 06:13:25 2013 -0800 680 681 vmwgfx: Add support for XMir v2. 682 683 Use the hosted infrastructure to add support for XMir. 684 Helpers go in vmwgfx_saa.c. 685 686 v2: Added comments for the helpers, and added a 687 vmwgfx_flush_dri2 to be executed when coming back from vt switch. 688 689 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 690 Reviewed-by: Brian Paul <brianp@vmware.com> 691 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 692 693commit c8e1c498431b1f8758f62c94131c302cf3d07b39 694Author: Thomas Hellstrom <thellstrom@vmware.com> 695Date: Mon Dec 16 06:05:35 2013 -0800 696 697 vmwgfx: Add an infrastructure to be able to run hosted under a compositor v2 698 699 Figure out what's needed both for XMir and XWayland and make a common 700 driver structure out of it. 701 702 v2: Added a lot of comments. No code change. 703 704 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 705 Reviewed-by: Brian Paul <brianp@vmware.com> 706 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 707 708commit f45a551e9b70ccec8f92df02747d4e2af299cf8c 709Author: Thomas Hellstrom <thellstrom@vmware.com> 710Date: Mon Dec 16 10:38:21 2013 +0100 711 712 vmwgfx: Fix compile breakage on XA version 1. 713 714 A recent revert brought back code that assumed XA version 2. 715 716 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 717 Reviewed-by: trivial 718 719commit 93228f3dd3355a25583d22dbb96791678b93be3e 720Author: Thomas Hellstrom <thellstrom@vmware.com> 721Date: Wed Dec 11 06:54:02 2013 -0800 722 723 vmwgfx: Really allow XA version 2. 724 725 When XA starts to correctly advertise version 2, we didn't allow it. 726 Fix this. 727 728 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 729 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 730 731commit 4af6062ce281a7f4aaa50985fe757e9569208ee1 732Author: Thomas Hellstrom <thellstrom@vmware.com> 733Date: Wed Dec 11 04:59:49 2013 -0800 734 735 Revert "vmwgfx: Get rid of device-specific DMA code" 736 737 This reverts commit 45b2457516a9db4bd1d60fbb24a1efbe2d9dd932. 738 739 Reverting this because using direct DMA for shared pixmaps should 740 boost performance. It should be usable both in a composited environment 741 and when running hosted. Need to retest the DMA flaws I saw before disabling 742 this code. 743 744 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 745 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 746 747commit c36cbcefb8526944141eb431e1e736dc4485a36e 748Author: Thomas Hellstrom <thellstrom@vmware.com> 749Date: Mon Dec 9 00:19:55 2013 -0800 750 751 vmwgfx: Remove stray 1 752 753 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 754 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 755 756commit a40cbd7b4fa19219849b4b0a48f07538772c3e22 757Author: Thomas Hellstrom <thellstrom@vmware.com> 758Date: Thu Dec 5 02:58:47 2013 -0800 759 760 vmwgfx: Support also XA version 1 v2 761 762 We need to support also XA version 1, since we want to be backwards 763 compatible with older mesa releases. 764 Unfortunately, the intended way of detecting XA major version at 765 compile-time was broken on mesa 10 so we need a workaround that tests 766 for XA version 2 at config time. 767 768 v2: Update the test for XA version 2. 769 770 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 771 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 772 773commit 7ac45326eccbf3bea9a4a8f95b9662a36ab58eb0 774Author: Thomas Hellstrom <thellstrom@vmware.com> 775Date: Thu Nov 28 02:02:20 2013 -0800 776 777 vmwgfx: Fix some compilation warnings and indentations 778 779 Most of the compilation warnings we're seeing are due to bad xorg headers, 780 but fix the ones we can fix in the driver. Some indentation fixes as well. 781 782 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 783 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 784 785commit e26dec8f5278df74a102493bf6d2d8444dab5d6d 786Author: Gaetan Nadon <memsize@videotron.ca> 787Date: Mon Oct 28 18:21:29 2013 -0400 788 789 vmwgfx: handle changes of DamageUnregister API in 1.14.99.2 790 791 Fix is inspired from the intel driver. 792 793 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 794 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 795 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 796 797commit 45b2457516a9db4bd1d60fbb24a1efbe2d9dd932 798Author: Thomas Hellstrom <thellstrom@vmware.com> 799Date: Wed Sep 19 21:50:40 2012 +0200 800 801 vmwgfx: Get rid of device-specific DMA code 802 803 It's rarely used and things seem to work well enough on top of XA. 804 805 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 806 Reviewed-by: Zack Rusin <zackr@vmware.com> 807 808commit 7192acf9f0bf8e7176ab0b803b861a858623f709 809Author: Thomas Hellstrom <thellstrom@vmware.com> 810Date: Wed Sep 19 20:36:57 2012 +0200 811 812 vmwgfx: Implement textured video completely on top of XA. 813 814 Remove device-specific hacks. This may increase resource usage a little 815 on old hardware revisions, but we don't need separate code paths on 816 different hardware revisions. 817 818 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 819 Reviewed-by: Zack Rusin <zackr@vmware.com> 820 821commit 835ce4698f916ba080f4132988fd4caf898e0b1e 822Author: Thomas Hellstrom <thellstrom@vmware.com> 823Date: Thu Sep 26 01:25:33 2013 -0700 824 825 vmwgfx: Avoid HW operations when not master 826 827 Note that for DRI2, a dri2_copy_region becomes a NOP when not master. 828 Additionally, all dri2 operations that lead to a potential kernel 829 access will return FALSE. 830 831 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 832 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 833 834commit 0945bea5fc32eacb7bf42639efbd45dcd43e7ab5 835Author: Rob Clark <robdclark@gmail.com> 836Date: Mon Jun 10 13:31:31 2013 -0400 837 838 vmwgfx: update for XA API changes 839 840 Signed-off-by: Rob Clark <robdclark@gmail.com> 841 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 842 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 843 Tested-by: Jakob Bornecrantz <jakob@vmware.com> 844 845commit b3345886332ee2b9fd1348dc2cd36257dfd71986 846Author: Jakob Bornecrantz <jakob@vmware.com> 847Date: Wed Apr 17 12:03:32 2013 +0200 848 849 Bump the version number to 13.0.1 850 851commit d13a6334fe76f4e869b2cb8c0a6a13c185b1bedd 852Author: Loïc Yhuel <loic.yhuel@gmail.com> 853Date: Thu Apr 11 11:29:10 2013 +0200 854 855 vmwgfx: Use myGlyphs to fix crashes 856 857 Tested-by: Christian Hesse <mail@eworm.de> 858 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 859 Signed-off-by: Loïc Yhuel <loic.yhuel@gmail.com> 860 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 861 862commit 23d87c92b7211cc5249eefe4ab3a2c7f370e279e 863Author: Zack Rusin <zackr@vmware.com> 864Date: Thu Feb 14 14:33:01 2013 -0800 865 866 Kill mibstore 867 868 It was a noop for at least 5 years and it has been removed. 869 870 Signed-off-by: Zack Rusin <zackr@vmware.com> 871 872commit 686859fba16ed2616c38bbe5d4e38abf4c5b7ae9 873Author: Zack Rusin <zackr@vmware.com> 874Date: Tue Jan 15 12:05:45 2013 -0800 875 876 Bump the version number to 13.0.0 877 878 New abi and various fixes 879 880 Signed-off-by: Zack Rusin <zackr@vmware.com> 881 882commit adf375f3d400e51b1e445e89de6bd82be0bb4ef3 883Author: Zack Rusin <zackr@vmware.com> 884Date: Thu Dec 6 16:40:13 2012 -0500 885 886 xf86-video-vmware 12.0.99.901 887 888 Internal release for a round of QE testing 889 890 Signed-off-by: Zack Rusin <zackr@vmware.com> 891 892commit 007bed30270ca9548dfe6e359972b56cbb8e2f13 893Author: Jakob Bornecrantz <jakob@vmware.com> 894Date: Tue May 29 23:01:14 2012 +0200 895 896 vmwgfx: Guard against null rotate pixmap in shadow destroy 897 898 Reviewed-by: Thomas Hellström <thellstrom@vmware.com> 899 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 900 901commit e5ac80d8f72963313358e31cfb1ab98583e26f23 902Author: Dave Airlie <airlied@redhat.com> 903Date: Tue Jul 3 13:50:30 2012 +0100 904 905 vmware: avoid warnings about shadowing 'i' 906 907 Signed-off-by: Dave Airlie <airlied@redhat.com> 908 909commit 46c0862d205eefa985e36a74391ca392640cb898 910Author: Dave Airlie <airlied@redhat.com> 911Date: Sat Jun 16 14:43:52 2012 +0100 912 913 vmware: drop infoFromScreen inline in favour of new interface 914 915 This also should fix the build regression introduced with the fix 916 for this macro. 917 918 Signed-off-by: Dave Airlie <airlied@redhat.com> 919 920commit 50c01998c7800bc02fd6656cc14efa715bf63e08 921Author: Robert Hooker <sarvatt@ubuntu.com> 922Date: Fri Jun 15 11:56:59 2012 -0400 923 924 vmware: Fix up some warnings after new compat API change. 925 926 Fixes multiple instances of these warnings on x86_64: 927 ../../src/vmware.h:180:5: warning: implicit declaration of function 'xf86ScreenToScrn' [-Wimplicit-function-declaration] 928 ../../src/vmware.h:180:5: warning: nested extern declaration of 'xf86ScreenToScrn' [-Wnested-externs] 929 ../../src/vmware.h:180:5: warning: return makes pointer from integer without a cast [enabled by default] 930 Function `xf86ScreenToScrn' implicitly converted to pointer at ../../src/vmware.h:180 931 932 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 933 Signed-off-by: Robert Hooker <sarvatt@ubuntu.com> 934 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 935 936commit 61df95a86f4997e342d50d7779b00aba2e8849a6 937Author: Dave Airlie <airlied@redhat.com> 938Date: Wed Jun 6 09:58:01 2012 +0100 939 940 vmware: port vmware driver to new compat API 941 942 This is a port of the vmware driver to the new compat API. 943 944 Tested-by: Jakob Bornecrantz <jakob@vmware.com> 945 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 946 Signed-off-by: Dave Airlie <airlied@redhat.com> 947 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 948 949commit 46cdf0ed0ad9df66f36f95e27b209d454f67d526 950Author: Brian Paul <brianp@vmware.com> 951Date: Fri Apr 20 14:24:26 2012 -0600 952 953 vmwgfx: set the XA_FLAG_SHARED flag for composite dest surfaces 954 955 This fixes a failed assertion in the gallium/svga driver in the 956 svga_texture_get_handle() function. The texture resource wasn't 957 getting created with the PIPE_BIND_SHARED flag so the !cachable 958 assertion would fail and the X session would abort. This didn't 959 happen with release builds. 960 961 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 962 963commit 4d76cfe5e8e5d594ec357b0ef3339f56eeca9c64 964Author: Jakob Bornecrantz <jakob@vmware.com> 965Date: Tue Mar 20 22:05:30 2012 +0100 966 967 Bump version number for the release 968 969 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 970 971commit c6f27561c7cf7c30f89493d64e3c5694b5f53469 972Author: Jakob Bornecrantz <jakob@vmware.com> 973Date: Mon Mar 19 14:53:34 2012 +0100 974 975 vmware/legacy: Fix crash on Xserver 1.12.0 976 977 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 978 Reviewed-by: Zack Rusin <zackr@vmware.com> 979 980commit b70116b907aa8545f0275589a52275235083bb40 981Author: Zack Rusin <zackr@vmware.com> 982Date: Thu Mar 15 11:37:26 2012 -0400 983 984 Fix a memory corruption due to a redundant free. 985 986 We use the empty rect purely as a placeholder and never 987 initialize it with its own memory so lets not try to free 988 it. 989 Spotted by Dave Airlie. 990 991 Signed-off-by: Zack Rusin <zackr@vmware.com> 992 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 993 994commit 57f1204292a116b35d5930752bc06f9065332879 995Author: Jakob Bornecrantz <jakob@vmware.com> 996Date: Tue Mar 13 21:41:11 2012 +0100 997 998 Bump version number for the release 999 1000 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 1001 1002commit e585f9ea04bbd17398d2fa804be38a4e75bc60e4 1003Author: Gaetan Nadon <memsize@videotron.ca> 1004Date: Tue Mar 13 09:44:46 2012 -0400 1005 1006 config: move AC_SYS_LARGEFILE in autoconf init section 1007 1008 There is no need for this statement to be conditionally included. 1009 It adds support for large files without taking anything away. 1010 1011 http://www.gnu.org/software/autoconf/manual/autoconf.html 1012 1013 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 1014 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 1015 1016commit 04169f3860e4a7d03485631bee40c05fc45b72c6 1017Author: Gaetan Nadon <memsize@videotron.ca> 1018Date: Mon Mar 12 14:51:38 2012 -0400 1019 1020 config: include saa and vmwgfx subdirs in the tarball 1021 1022 Use AM_CONDITIONAL. Automake knows what to distribute. 1023 It needs to be able to navigate down the subdirs to find what 1024 needs to be included in the tarball. 1025 1026 To test reliably, create a tarball and expand it into a separate 1027 directory and build with xatracker. Distcheck will not detect 1028 missing code when such code is configured not to build. 1029 1030 The content of a tarball *must* always be identical, regardless 1031 of the configuration options used or on which platform it was configured. 1032 1033 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 1034 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 1035 1036commit e6836ff099e5565dea58a53bba9b2df377241ef7 1037Author: Zack Rusin <zackr@vmware.com> 1038Date: Thu Mar 8 09:55:07 2012 -0500 1039 1040 Bump version number for the release 1041 1042 Signed-off-by: Zack Rusin <zackr@vmware.com> 1043 1044commit c5c38bab8c493985349356be5fadc14d3aee8040 1045Author: Thomas Hellstrom <thellstrom@vmware.com> 1046Date: Wed Feb 8 15:00:20 2012 +0100 1047 1048 vmware/legacy: Fix initial mode size v2 1049 1050 Commit "vmwlegacy: Make the default be a minium of 800x600..." 1051 read the dimensions from the incorrect register pair. 1052 1053 v2: Also treat initial widths and heights larger than the maximum 1054 values as an error and revert back to the minimum. 1055 1056 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1057 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1058 1059commit 49b4cbc5100ce9a4cc40132c2839f9401a58b92e 1060Author: Thomas Hellstrom <thellstrom@vmware.com> 1061Date: Mon Feb 6 19:48:57 2012 +0100 1062 1063 saa: Try to avoid readbacks during polyFillRect 1064 1065 This significantly improves performance of shaped windows on top of 3D 1066 contents 1067 1068 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1069 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1070 Reviewed-by: Zack Rusin <zackr@vmware.com> 1071 1072commit ecf6c5b1081e70ec64132a8188c8cc15945c2290 1073Author: Thomas Hellstrom <thellstrom@vmware.com> 1074Date: Thu Feb 2 10:24:26 2012 +0100 1075 1076 vmware: Kill warnings on Xserver 1.12 1077 1078 Compile-tested on servers 1.0 through 1.12. 1079 1080 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1081 1082commit 3e18d43c7f8ab5dcb94ac285a687eaaa1a578250 1083Author: Thomas Hellstrom <thellstrom@vmware.com> 1084Date: Wed Feb 1 17:30:52 2012 +0100 1085 1086 vmwgfx: Kill a deprecation warning on server 1.12 1087 1088 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1089 1090commit bfb286bea967c26426aebda2a581f35da0d86884 1091Author: Thomas Hellstrom <thellstrom@vmware.com> 1092Date: Wed Feb 1 17:25:19 2012 +0100 1093 1094 vmwgfx: Fix up swap[sl] for server 1.12 1095 1096 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1097 1098commit 8ff19c2b2f288d6851b444dbda39544980837b73 1099Author: Thomas Hellstrom <thellstrom@vmware.com> 1100Date: Wed Feb 1 16:59:13 2012 +0100 1101 1102 vmwgfx: Avoid including a library header and use pixman for type conversion 1103 1104 The PictTransform type is a typedef of a pixman type. 1105 1106 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1107 1108commit 193b5118199028ea0180785bb3f4c8a16359b8b0 1109Author: Thomas Hellstrom <thellstrom@vmware.com> 1110Date: Fri Jan 13 17:01:02 2012 +0100 1111 1112 Bump version number for release 1113 1114 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1115 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1116 1117commit c5af120177949c82cbd0611da565fef9c2c829cb 1118Author: Thomas Hellstrom <thellstrom@vmware.com> 1119Date: Fri Jan 13 17:14:47 2012 +0100 1120 1121 Make the driver build pass "make distcheck" 1122 1123 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1124 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1125 1126commit e6d03aceb1195de0b490f39024f34a33b1a8f6fc 1127Author: Thomas Hellstrom <thellstrom@vmware.com> 1128Date: Thu Jan 12 14:00:41 2012 +0100 1129 1130 vmwgfx: Adapt to new XA version number v2 1131 1132 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1133 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1134 1135commit 59435d2d3af8a9f64ee40eac4f0479470ba6badf 1136Author: Thomas Hellstrom <thellstrom@vmware.com> 1137Date: Thu Jan 12 17:57:37 2012 +0100 1138 1139 vmwgfx,saa: Fix a bunch of compilation warnings 1140 1141 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1142 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1143 1144commit 0628ad20f31a239f99fcbbfe42197c56a5ae8864 1145Author: Jakob Bornecrantz <jakob@vmware.com> 1146Date: Fri Dec 9 07:34:58 2011 +0100 1147 1148 vmwlegacy: Make the default be a minimum of 800x600 1149 1150 This patch and the corresponding vmwgfx patch formalizes both drivers 1151 on the same behviour. The minimum is 800x600 (unless the max size is 1152 smaller). This makes it unnecessary to check against VRAM size since 1153 it is always at least large enough to fit the max values. 1154 1155 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 1156 1157commit 8ddbb3216d29b2ecd336d50461216feef0900fd9 1158Author: Thomas Hellstrom <thellstrom@vmware.com> 1159Date: Thu Jan 12 10:00:41 2012 +0100 1160 1161 vmware: Make sure the driver builds on old servers 1162 1163 Move things around a bit so the driver compiles with 1164 servers back to Xserver 1.0. 1165 1166 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1167 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1168 1169commit 194ff6f1517d0a8250e64c3d768a9b7ae9ed3140 1170Author: Thomas Hellström <thellstrom@vmware.com> 1171Date: Wed Jan 11 14:49:56 2012 +0100 1172 1173 vmware: Update Manpage 1174 1175 Update the Manpage with new options and a brief modesetting- and 3D 1176 description. 1177 1178 Signed-off-by: Thomas Hellström <thellstrom@vmware.com> 1179 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1180 1181commit b5546fb1de3f3859151a91e98ab0bd24b6789e2e 1182Merge: abf9cb7 5748c33 1183Author: Thomas Hellstrom <thellstrom@vmware.com> 1184Date: Mon Dec 19 20:25:43 2011 +0100 1185 1186 Merge branch 'vmwgfx_branch' 1187 1188commit 5748c33535bc7d3009b9758653885e6ae0e73002 1189Author: Thomas Hellstrom <thellstrom@vmware.com> 1190Date: Wed Dec 14 12:38:27 2011 +0100 1191 1192 saa, vmwgfx: Fix saa_copy_composite 1193 1194 The traditional accelerated copy methods aren't format aware. 1195 Make saa copy format aware,and pass formats on to the driver copy function 1196 if available. If the driver can't handle format conversions it needs to 1197 return FALSE. 1198 1199 This fixes format confusion in the copy composite fastpath. 1200 1201 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1202 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1203 1204commit f664e31d73bd31594e069d8bcca872687b84d8d9 1205Author: Thomas Hellstrom <thellstrom@vmware.com> 1206Date: Wed Dec 14 10:22:22 2011 +0100 1207 1208 saa: Always read back hw contents on poly_fill_rect 1209 1210 The damage region may be much larger than the actual area 1211 filled, so make sure we read back any hw contents in the damage region 1212 since we use it to mark sw dirty. 1213 Revisit this in the future since it may increase readbacks in an 1214 undesired way. There are workarounds. 1215 1216 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1217 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1218 1219commit 0eef22437093d29f572abea845fff9c03fca5e4e 1220Author: Thomas Hellstrom <thellstrom@vmware.com> 1221Date: Wed Dec 14 10:18:16 2011 +0100 1222 1223 saa: Only try to accelerate pixmaps that are driver pixmaps 1224 1225 Trying to accelerate scratch pixmaps doesn't work currently, 1226 and I'm not sure it's a big benefit either. 1227 1228 This is in line with what EXA does. 1229 1230 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1231 Reviewed-by: Jakob Bornecrants <jakob@vmware.com> 1232 1233commit afd2f828b8a8b2ccc6ebe4d56104db3d03d08493 1234Author: Thomas Hellstrom <thellstrom@vmware.com> 1235Date: Thu Dec 8 13:14:57 2011 +0100 1236 1237 vmwgfx: Reduce system resource usage with textured video 1238 1239 Use U and V textures and corresponding dma buffers that match 1240 the size of the input UV data rather than using textures and DMA buffers 1241 that match the Y data. This simplifies data copy and reduces the amount of 1242 image data transfered to the host by up to 50% (YV12). 1243 1244 It also reduces dma buffer- and surface memory usage correspondingly. 1245 1246 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1247 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1248 1249commit 121dba0093d24eb0aefa3d27a22f05f85ac66f72 1250Author: Thomas Hellstrom <thellstrom@vmware.com> 1251Date: Wed Dec 7 20:19:34 2011 +0100 1252 1253 vmwgfx: Hook up XV color conversion control attributes 1254 1255 This enables the standard XV color conversion control attributes 1256 contrast, scaling, saturation and hue. 1257 1258 Currently the attribute change takes effect on the next image only. 1259 If we ever implement a ReputImage callback, we can use it to update 1260 the image immediately on attribute change. 1261 1262 The attribute ranges follow those used by the proprietary Nvidia driver. 1263 1264 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1265 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1266 1267commit 8bdc6004d34e274d815bb3f3e0aa223085ea848c 1268Author: Thomas Hellstrom <thellstrom@vmware.com> 1269Date: Wed Dec 7 14:17:45 2011 +0100 1270 1271 vmwgfx: Adapt to new interface of xa_yuv_planar_blit 1272 1273 Also make it easier to modify the color conversion matrix based on 1274 yuv encoding properties. 1275 1276 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1277 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1278 1279commit dba7b865d36ebe06b54987176b1a83cdbc2f846a 1280Author: Thomas Hellstrom <thellstrom@vmware.com> 1281Date: Tue Dec 6 10:00:00 2011 +0100 1282 1283 vmwgfx: Fix MessageType members that are incorrectly typed as Bool 1284 1285 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1286 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1287 1288commit 2c438ad8b82f47ac3252403052df16655184acbd 1289Author: Thomas Hellstrom <thellstrom@vmware.com> 1290Date: Tue Dec 6 09:53:16 2011 +0100 1291 1292 vmwgfx: Add an option to enable rendercheck mode 1293 1294 Rendercheck mode is used to enable acceleration of all supported composite 1295 operations, regardless of the current data location. The mode is off by 1296 default, but could be turned on to test the hardware composite operation 1297 implementation. Due to excessive data migration, rendercheck mode will be 1298 slow. 1299 1300 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1301 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1302 1303commit 1736a76246f0a0dab01f5a1066332168d34b2803 1304Author: Thomas Hellstrom <thellstrom@vmware.com> 1305Date: Tue Dec 6 09:21:25 2011 +0100 1306 1307 vmwgfx: Adapt to the dri state tracker sending depth instead of bpp 1308 1309 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1310 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1311 1312commit fb35176958bba2f86d6d466ccb7baadcff806512 1313Author: Thomas Hellstrom <thellstrom@vmware.com> 1314Date: Mon Dec 5 20:58:45 2011 +0100 1315 1316 vmwgfx: Don't register back buffers as "hw_is_dri2_fronts" v2 1317 1318 That is reserved for dri2 front or fake front pixmaps that need 1319 immediate flushing of software contents to hardware. 1320 1321 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1322 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1323 1324commit 3c2486e05e98f2ff8f4e3d2633d91e14140a676e 1325Author: Jakob Bornecrantz <jakob@vmware.com> 1326Date: Thu Dec 1 16:47:41 2011 +0100 1327 1328 vmwgfx: Include drm.h from correct path 1329 1330 Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> 1331 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 1332 1333commit 995d86ceb0ae8cf2904100405ba6710c89f7f1b7 1334Author: Thomas Hellstrom <thellstrom@vmware.com> 1335Date: Mon Nov 28 14:51:36 2011 +0100 1336 1337 vmwgfx: Make the drm device name persistent 1338 1339 The DRI2 code doesn't copy the device name, but assumes the storage 1340 is persistent. 1341 1342 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1343 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1344 Reviewed-by: Alan Hourihane <alanh@vmware.com> 1345 1346commit 08ca819238f2c2a0494b0bd8452393fc62907cc1 1347Author: Thomas Hellstrom <thellstrom@vmware.com> 1348Date: Fri Nov 25 14:38:45 2011 +0100 1349 1350 vmwgfx: Get the drm device name from the open file descriptor 1351 1352 Rather than hardcoding it. 1353 1354 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1355 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1356 1357commit d7576c2c50dd0f3b7f70f97d9bde4e8b859e89e5 1358Author: Thomas Hellstrom <thellstrom@vmware.com> 1359Date: Fri Nov 25 11:27:26 2011 +0100 1360 1361 vmwgfx: Use config options to optionally set GUI topology 1362 1363 Use option "StaticXinerama" or "GuiLayout" to set initial GUI topology, 1364 similar to how these options are used with the legacy driver. 1365 1366 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1367 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1368 1369commit 22d3e58b8810a73c4818d4d3943776a387147b83 1370Author: Thomas Hellstrom <thellstrom@vmware.com> 1371Date: Wed Nov 23 11:02:00 2011 +0100 1372 1373 vmwlegacy: Factor out code that can be common for vmwgfx and vmwlegacy 1374 1375 In this case it's the parsing of the gui / statix xinerama topology. 1376 1377 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1378 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1379 1380commit 2e8aac7031a83f507169f6fe42924c51bdaf7326 1381Author: Thomas Hellstrom <thellstrom@vmware.com> 1382Date: Wed Nov 23 10:49:33 2011 +0100 1383 1384 vmwlegacy: Accept option "GuiLayout" as a synonym for "staticXinerama" 1385 1386 It's more user-friendly and in line with what it's being used for in the 1387 vmwgfx driver. 1388 1389 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1390 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1391 1392commit 31e80b2a609631d85341025d7f2d0fb818f386f5 1393Author: Thomas Hellstrom <thellstrom@vmware.com> 1394Date: Fri Nov 25 09:42:16 2011 +0100 1395 1396 vmware: Update library dependencies 1397 1398 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1399 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1400 1401commit da29c648051208b98704860f851564a80bd3b123 1402Author: Thomas Hellstrom <thellstrom@vmware.com> 1403Date: Tue Nov 22 21:06:24 2011 +0100 1404 1405 vmwgfx: Pre-init fixes 1406 1407 A bunch of fixes that makes the fallback from vmwgfx to vmwlegacy easier. 1408 1409 1) Allow only 16 and 24 bit depths with vmwgfx. We may revisit this later. 1410 2) Try to reclaim some resources if pre_init fails. 1411 3) Print error messages so the user understands what happens on fallback. 1412 1413 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1414 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1415 1416commit e52b1505cfc4a7d0507e14c3b6335a9b9652c50f 1417Author: Thomas Hellstrom <thellstrom@vmware.com> 1418Date: Fri Nov 25 09:15:32 2011 +0100 1419 1420 vmware: Update the vmware register definition 1421 1422 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1423 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1424 1425commit 1c77e3d7434f04c59233ce7e497a949e386e1630 1426Author: Thomas Hellstrom <thellstrom@vmware.com> 1427Date: Tue Nov 22 19:56:20 2011 +0100 1428 1429 vmware: Hook up vmwgfx to be tried before falling back to legacy 1430 1431 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1432 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1433 1434commit 2aa256c96496ed6dd9dbd5880c278f4422500b0f 1435Author: Thomas Hellstrom <thellstrom@vmware.com> 1436Date: Tue Nov 22 18:37:44 2011 +0100 1437 1438 vmwlegacy: Factor out bootstrap functions 1439 1440 Preparing for choosing driver path in preinit instead of using 1441 shim loader. 1442 1443 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1444 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1445 1446commit abf9cb75630cb27bb4741d194cb23014fe3d09b1 1447Author: Thomas Hellstrom <thellstrom@vmware.com> 1448Date: Thu Nov 17 16:38:22 2011 +0100 1449 1450 vmwlegacy: Fix up Xinerama / panoramiX replies. 1451 1452 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1453 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1454 1455commit be23efbc91f47a6a34fbe24f167ee29fdf58f541 1456Author: Thomas Hellstrom <thellstrom@vmware.com> 1457Date: Wed Nov 16 10:23:10 2011 +0100 1458 1459 vmwlegacy: Fix device fifo communication 1460 1461 This fixes two issues with the device fifo communication: 1462 1) Idle the fifo before initializing it. If the fifo is already up and 1463 processing data due to an uncleanly shut down server, and init could 1464 otherwise confuse the device. 1465 1466 2) Mark fifo memory volatile when writing to it and make sure commands 1467 are written before telling the device they are available. 1468 1469 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1470 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1471 1472commit 70487eee975c63b5ed1492927bbc661425278276 1473Author: Thomas Hellstrom <thellstrom@vmware.com> 1474Date: Wed Nov 9 11:34:16 2011 +0100 1475 1476 vmwgfx: Make sure we don't render when VT switched 1477 1478 When compiz is enabled, we may try to DMA sw rendered contents of dri2 1479 drawables to surfaces while VT switched. I'm not sure how this could be 1480 happening, but queue the DMA until the next block handler. 1481 1482 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1483 Reviewed-by: Alan Hourihane <alanh@vmware.com> 1484 1485commit e1810e0b09e07bdab05a57fdef74450a507e9dfa 1486Author: Thomas Hellstrom <thellstrom@vmware.com> 1487Date: Tue Nov 8 15:28:40 2011 +0100 1488 1489 vmwgfx: Fix rendering errors when rotating / unrotating a screen. 1490 1491 The dirty trackers weren't correctly translated to 1492 pending presents / updates when a pixmap was bound as a scanout. 1493 1494 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1495 Reviewed-by: Jakob Bornecrants <jakob@vmware.com> 1496 1497commit d0b493d67afd1b5e8c8397c7938752ecd56c91ba 1498Author: Thomas Hellstrom <thellstrom@vmware.com> 1499Date: Tue Nov 8 14:49:36 2011 +0100 1500 1501 vmwgfx: A number of damage fixes 1502 1503 A damage tracker was sometimes attached to a pixmap in the middle of an 1504 operation. That meant that damage was never registered for that operation 1505 which caused dirty-tracking to fail. Instead, add a damage tracker as 1506 soon as we have storage attached to the pixmap. 1507 1508 Also, when a pixmap was resized, the dirty region trackers could become 1509 stale, and cause DMA operation extending outside of the pixmap with 1510 server crashes as a result. This commit fixes that. 1511 1512 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1513 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1514 1515commit aff799d007c8383321213ad177e5a9deec2b3978 1516Author: Thomas Hellstrom <thellstrom@vmware.com> 1517Date: Tue Nov 1 15:39:07 2011 +0100 1518 1519 vmwgfx: Add an option to use a scanout surface 1520 1521 With this option enabled, we compose all contents (both sw and hw) in 1522 the guest before presenting it. Just like the old xorg state tracker did 1523 when 3D was enabled. It's not as bad as the old xorg state tracker was for 1524 interactivity, but there's a small but noticeable lag when moving windows. 1525 1526 It's mainly intended for testing purposes, like testing the surface 1527 dirty paths in the kernel module. 1528 1529 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1530 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1531 1532commit 5137e8736edfab1aaebef4046baab37361584b2e 1533Author: Thomas Hellstrom <thellstrom@vmware.com> 1534Date: Tue Nov 1 09:59:18 2011 +0100 1535 1536 vmwgfx: Be correct when setting up damage tracking 1537 1538 When setting up damage tracking, previously the code would guess wether 1539 sw or hw was currently dirty. The caller always have that information, 1540 so pass it to the damage tracking setup function. 1541 1542 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1543 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1544 1545commit ed7bba3cda4b454eec771d3bf0ebed4fd998a82a 1546Author: Thomas Hellstrom <thellstrom@vmware.com> 1547Date: Tue Nov 1 08:38:52 2011 +0100 1548 1549 vmwgfx: Add an option for direct presents 1550 1551 With this option set to true, accelerated copies to a scanout pixmap will 1552 be performed as hardware presents instead of copies to an intermediate 1553 3D surface backing the scanout pixmap, followed by a present. 1554 1555 Depending on the application this might be a performance boost, but since 1556 it might trigger device software readbacks in other situations, for example 1557 dri2 copy front->fake_front, it might be a performance hog in other situations, 1558 so disable it by default. (Before this commit it was enabled by default). 1559 1560 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1561 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1562 1563commit b2c4a7e682e14fa8af42415d429d6735117fefcb 1564Author: Thomas Hellstrom <thellstrom@vmware.com> 1565Date: Mon Oct 31 15:14:21 2011 +0100 1566 1567 vmwgfx: Fix acceleration options. 1568 1569 Introduce relevant acceleration options and fix up the log printout. 1570 1571 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1572 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1573 Reviewed-by: Alan Hourihane <alanh@vmware.com> 1574 1575commit da85719e9e373ee8da53388cccc71a0f9c8bbefc 1576Author: Thomas Hellstrom <thellstrom@vmware.com> 1577Date: Mon Oct 31 14:40:55 2011 +0100 1578 1579 vmwgfx: Remove a couple of unused options 1580 1581 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1582 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1583 Reviewed-by: Alan Hourihane <alanh@vmware.com> 1584 1585commit b6faecc7613e8c73f0681d20a1a80e5e0ddd4058 1586Author: Thomas Hellstrom <thellstrom@vmware.com> 1587Date: Mon Oct 31 14:27:29 2011 +0100 1588 1589 vmwgfx: Don't do present readbacks per crtc 1590 1591 The kernel now takes care of doing this the right way; 1592 no need to duplicate that functionality. 1593 1594 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1595 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1596 1597commit cc7c1c961b77c139b95fbb6948204def1b4b908a 1598Author: Thomas Hellstrom <thellstrom@vmware.com> 1599Date: Mon Oct 31 10:50:09 2011 +0100 1600 1601 vmwgfx: Fall back to sw cursors if needed 1602 1603 If there is a risc that we need two simultaneous cursors, 1604 (two outputs showing the same contents, at least one of them explicit), 1605 fall back to sw cursor. 1606 1607 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1608 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1609 1610commit 427064b57c52c8881c7a64d9c9e21411e79e644b 1611Author: Thomas Hellstrom <thellstrom@vmware.com> 1612Date: Wed Oct 26 16:33:30 2011 +0200 1613 1614 vmwgfx: Fix crtc position of transformed fb 1615 1616 The fb allocated for transformed data always matches the scanout region, 1617 so set the crtc origin to (0,0) 1618 1619 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1620 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1621 1622commit 55113dae7cbe99bfb69869831536ff34ed445c73 1623Author: Thomas Hellstrom <thellstrom@vmware.com> 1624Date: Wed Oct 26 15:08:18 2011 +0200 1625 1626 vmwgfx: Hook up vmwarectrl to the gui layout ioctl 1627 1628 Requires drm 2.3. 1629 1630 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1631 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1632 1633commit c73a7f3d991dd95d332829f2ca8a88aabfea5a46 1634Author: Thomas Hellstrom <thellstrom@vmware.com> 1635Date: Wed Oct 26 07:28:31 2011 +0200 1636 1637 vmwgfx: Update the connector type name array 1638 1639 Also map connector types that are not in the array to "Unknown". 1640 1641 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1642 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1643 1644commit a33710b0d16c9c01a1995b60f0b0d4d482f459d3 1645Author: Thomas Hellstrom <thellstrom@vmware.com> 1646Date: Fri Oct 21 11:19:36 2011 +0200 1647 1648 vmwgfx: Save the dri2 requested depth since it may differ from the drawable 1649 depth. 1650 1651 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1652 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1653 1654commit 4c08c2600936efeedb1a33436876ba82a11218e7 1655Author: Jeremy Huddleston <jeremyhu@apple.com> 1656Date: Fri Oct 7 13:15:11 2011 -0700 1657 1658 Build fix for ABI version 12 1659 1660 This results in the vmware driver assuming there is only one PCI domain, 1661 which I think is true for everywhere this is expected to run anyway. 1662 1663 Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com> 1664 1665commit 208ccbc7179b40a570a5943e325dd22740a67577 1666Author: Jeremy Huddleston <jeremyhu@apple.com> 1667Date: Fri Oct 7 13:10:59 2011 -0700 1668 1669 Fix build failures resulting from changes to the swaps and swapl macros in recent xorg-server 1670 1671 Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com> 1672 1673commit de70a1d0cb79dad9e52baa43306264db80a163da 1674Author: Thomas Hellstrom <thellstrom@vmware.com> 1675Date: Wed Oct 5 13:33:17 2011 +0200 1676 1677 xf86-video-vmware 11.0.99.901 1678 1679 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1680 1681commit 26845eb54a15d43f09288a87c5f74beac8fb6ec7 1682Author: Alan Coopersmith <alan.coopersmith@oracle.com> 1683Date: Tue Sep 27 19:31:22 2011 -0700 1684 1685 Use dixLookupWindow instead of LookupWindow on Xorg 1.5 & later 1686 1687 The LookupWindow function was deprecated in xserver commit ed75b056511ccb4 1688 and removed during the Xorg 1.11 merge window by commit 82a8677d9175732. 1689 1690 Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com> 1691 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1692 1693commit 5c43481aa639053bbbf7fbf5f72f0edecf616731 1694Author: Thomas Hellstrom <thellstrom@vmware.com> 1695Date: Thu Sep 1 13:59:10 2011 +0200 1696 1697 vmwgfx: Adapt to vmwgfx kernel driver 2.1 1698 1699 This introduces fence objects with 2.0, and present / present readback 1700 ioctls with 2.1. 1701 1702 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1703 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1704 1705commit b5438423ad29338429321cd29118a66b715cdcac 1706Author: Matt Turner <mattst88@gmail.com> 1707Date: Sun Sep 25 14:06:47 2011 -0400 1708 1709 Fix wrong-sized swaps 1710 1711 Signed-off-by: Matt Turner <mattst88@gmail.com> 1712 1713commit 3c2f9cc43f7d36952e78d10d224da0ba68ecefea 1714Author: Thomas Hellstrom <thellstrom@vmware.com> 1715Date: Tue Aug 30 12:22:53 2011 +0200 1716 1717 vmwgfx-xorg: Avoid enabling unwanted outputs in initial configuration 1718 1719 Add a hack so that we avoid enabling all connected outputs during the 1720 initial configuration. On older X servers they would be enabled as cloned, 1721 which didn't really cause any problem, but on later X servers they would 1722 initially be enabled next to eachother which looks odd. 1723 1724 A RandR call will still show the disabled outputs as connected, and if there 1725 is a monitor section in the config file for the output in question, 1726 it will also have a connected status, so that it may be explicitly enabled 1727 or disabled from a config file. 1728 1729 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1730 Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 1731 1732commit f17abaa926fdbedab1e6236e109fa746fcc2320b 1733Author: Jakob Bornecrantz <jakob@vmware.com> 1734Date: Wed Jul 13 16:30:01 2011 +0100 1735 1736 vmwgfx: Just include vmwgfx_drm.h 1737 1738 We do this in mesa as well 1739 1740 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 1741 1742commit b29d71e3adb16f2a8e3e9d534bf8b1c1f8e0d9ef 1743Author: Jakob Bornecrantz <jakob@vmware.com> 1744Date: Wed Jul 13 16:28:52 2011 +0100 1745 1746 saa: Remove superflouos headers includes 1747 1748 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 1749 1750commit 98ff64fd7a13d2824d6f36b0d8f13d95f8be9e48 1751Author: Jakob Bornecrantz <jakob@vmware.com> 1752Date: Mon Jul 11 12:23:32 2011 +0100 1753 1754 vmwgfx: Fix logic when checking for XA 1755 1756 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 1757 1758commit 858dbcdddb35b690a543a103d43dcaeb040260c1 1759Author: Thomas Hellstrom <thellstrom@vmware.com> 1760Date: Sat Jul 9 22:54:41 2011 +0200 1761 1762 vmwgfx: Don't dirty the front buffer as hw when doing a dri2copyregion from it 1763 1764 When copying from a dri2 buffer we usually dirty it as hw, since dri has 1765 been rendering to it, and there can only be hw contents in the buffer. 1766 1767 However for the real front, X has already done the dirty work for us. 1768 1769 Also remove a glxWaitX() debug message. 1770 1771 This should fix piglit read-front. 1772 1773 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1774 1775commit eea96a6f5ccc6a3a1e2bb2737f211076de443462 1776Author: Thomas Hellstrom <thellstrom@vmware.com> 1777Date: Thu Jul 7 22:02:15 2011 +0200 1778 1779 vmwgfx: Add boolean flags for different rendering modes 1780 1781 Basically we support three ways of getting data to the screen: 1782 1) Mixed mode: We mix presents and updates. 1783 2) Mixed present optimized: A version of mixed where copies to the front 1784 buffer end up as presents, saving a blit. 1785 3) 3D surface mode: We only present from a 3D surface. Software contents are 1786 first DMA'd to that surface. 1787 1788 This change adds boolean flags to the saa struct to select which mode to use. 1789 1790 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1791 1792commit 9cff0a84308723d9790c6365c0d4b1c107794995 1793Author: Thomas Hellstrom <thellstrom@vmware.com> 1794Date: Thu Jul 7 09:21:56 2011 +0200 1795 1796 vmwgfx: Various acceleration fixes. 1797 1798 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1799 1800commit 4ae8aac35b7209576eaeb64347470d3145b27832 1801Author: Thomas Hellstrom <thellstrom@vmware.com> 1802Date: Mon Jul 4 15:39:02 2011 +0200 1803 1804 vmwlegacy: Fix server termination due to pitch inconsistency. 1805 1806 Don't require a 32*32 bit pitch alignment when validating modes, since the 1807 requested virtual pitch (pVMWARE->maxWidth*bpp) must be a multiple of that 1808 alignment. If not, the server will terminate with a cryptic error message. 1809 1810 This is only for validating modes. The driver will adjust the pitch to the 1811 host requirement when a mode is set anyway, and hopefully the host won't 1812 require a pitch it doesn't support. 1813 1814 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1815 1816commit 81e7099b6bbd9fdae66a3186dfc3fff2758009cf 1817Author: Thomas Hellstrom <thellstrom@vmware.com> 1818Date: Fri Jul 1 13:23:30 2011 +0200 1819 1820 vmwgfx: Require libxatracker >= 0.4. 1821 1822 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1823 1824commit d2e27ee5c116cd914d98c2ffa4a974704c250be7 1825Author: Thomas Hellstrom <thellstrom@vmware.com> 1826Date: Fri Jul 1 12:29:50 2011 +0200 1827 1828 vmwgfx: Set up XA version checking. 1829 1830 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1831 1832commit 8a9997f060487c0aef07b8e8a95bb3a862de264f 1833Author: Thomas Hellstrom <thellstrom@vmware.com> 1834Date: Fri Jul 1 11:28:52 2011 +0200 1835 1836 vmwgfx: Try to sort out format handling with composite. 1837 1838 Try to catch all cases where we have to do readbacks or format conversions 1839 due to composite formats not being compatible with ordinary accel formats. 1840 1841 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1842 1843commit 8a21da8eaa77bb1ec55ab8b5584554ae6cc41e1e 1844Author: Thomas Hellstrom <thellstrom@vmware.com> 1845Date: Wed Jun 22 22:26:20 2011 +0200 1846 1847 vmwgfx: Support xa composite. 1848 1849 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1850 1851commit c7e8388280fc047b33be4f603afa4b7615ffc585 1852Author: Thomas Hellstrom <thellstrom@vmware.com> 1853Date: Wed Jun 22 11:33:14 2011 +0200 1854 1855 saa: Add driver composite. 1856 1857 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1858 1859commit b2e116971031d1357f614e9ce1d843768489a304 1860Author: Thomas Hellstrom <thellstrom@vmware.com> 1861Date: Wed Jun 22 10:50:35 2011 +0200 1862 1863 saa: Reuse code for computing composite bounds. 1864 1865 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1866 1867commit 3650be74d5da602653b2b1d3cf3a6bb5a9cb3539 1868Author: Thomas Hellstrom <thellstrom@vmware.com> 1869Date: Tue Jun 21 00:13:32 2011 +0200 1870 1871 vmwgfx: Try to match created hardware formats with the dri state tracker. 1872 1873commit 63d7ddb35fe8b6743de182b73e6967f97f6a7eba 1874Author: Thomas Hellstrom <thellstrom@vmware.com> 1875Date: Mon Jun 20 21:57:38 2011 +0200 1876 1877 vmwgfx: Fix dirty present bug 1878 1879 Clear dirty present areas when new contents are drawn to the backing 1880 pixmap. Not when it is actually pushed to the screen. 1881 1882 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1883 1884commit f71928d3f78d9f9e5a0fd240069b9035d4ccac75 1885Author: Thomas Hellstrom <thellstrom@vmware.com> 1886Date: Mon Jun 20 21:48:23 2011 +0200 1887 1888 vmwgfx: Don't call xa_copy_done after a present. 1889 1890 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1891 1892commit 4d5aec4a7e4512145c76014591488cb5a98ff0ea 1893Author: Thomas Hellstrom <thellstrom@vmware.com> 1894Date: Mon Jun 20 14:13:46 2011 +0200 1895 1896 vmwgfx: Make present readbacks not cross scanout bounding box boundaries 1897 1898 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1899 1900commit f6a4690832143b01d419b52a4cb74350cdfa38bf 1901Author: Thomas Hellstrom <thellstrom@vmware.com> 1902Date: Mon Jun 20 09:58:44 2011 +0200 1903 1904 vmwgfx: Make a list of scanout bounding boxes available to each scanout pixmap 1905 1906 This info is needed for present readback. 1907 1908 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1909 1910commit eea0e6e242a604b1f4d85d947cf2b3f9f4977533 1911Author: Thomas Hellstrom <thellstrom@vmware.com> 1912Date: Mon Jun 20 09:05:48 2011 +0200 1913 1914 vmwgfx: Import the WSBM list macros 1915 1916 Use WSBM list handling macros for the glxWaitX flush list. 1917 1918 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1919 1920commit eabf82fad8ad72aab071cd4e3bc9063022b0aeb3 1921Author: Thomas Hellstrom <thellstrom@vmware.com> 1922Date: Fri Jun 17 11:25:53 2011 +0200 1923 1924 vmwgfx: Check for large files 1925 1926 Fixes segfault on 32-bit servers. 1927 1928 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1929 1930commit 7966dfa47c4d2b022ebf0f25a2db3901376e6cbd 1931Author: Thomas Hellstrom <thellstrom@vmware.com> 1932Date: Fri Jun 17 08:18:13 2011 +0200 1933 1934 vmwgfx, saa: Build saa as a convenience library 1935 1936 instead of as a shared object. 1937 1938 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1939 1940commit d28613e557fcdc4fc69f9a138a8c5fc909a719f5 1941Author: Thomas Hellstrom <thellstrom@vmware.com> 1942Date: Thu Jun 16 21:21:25 2011 +0200 1943 1944 vmwgfx: Fix up driver build process for Xserver >= 1.7. 1945 1946 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1947 1948commit 84166d4b457244bcc2f5ace63702d594d602d0c2 1949Author: Thomas Hellstrom <thellstrom@vmware.com> 1950Date: Thu Jun 16 15:55:07 2011 +0200 1951 1952 vmwgfx, saa: Initial import 1953 1954 This imports the vmwgfx driver, based on the Gallium3D Xorg state tracker, 1955 as well as the saa library. A "Shadow Acceleration Architecture", which is 1956 optimized for the case where transfers between system (shadow) and hw memory 1957 is very costly. 1958 1959 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1960 1961commit 0142bb8d10edb153c9ce79a2ea3ff92a7fb15ac5 1962Author: Thomas Hellstrom <thellstrom@vmware.com> 1963Date: Wed Mar 30 12:37:24 2011 +0200 1964 1965 vmwlegacy: Don't prune modes based on the virtual size of the default mode 1966 1967 We might be pruning modes based on the virtual size of the default mode in 1968 some situations. Avoid this by allowing a virtual size equal to the device 1969 max size, unless the user has requested something else. 1970 1971 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1972 Reviewed-by: Alan Hourihane <alanh@vmware.com> 1973 1974commit 04297d435b87e3d04a427ac8ef33d314727220e6 1975Author: Thomas Hellstrom <thellstrom@vmware.com> 1976Date: Wed Mar 30 12:22:43 2011 +0200 1977 1978 vmwlegacy: Fix up default mode VRefresh anc Clock calculation 1979 1980 The VRefresh value was a factor 1000 too high. 1981 Calculate clock based on vrefresh and resolution. 1982 1983 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1984 Reviewed-by: Alan Hourihane <alanh@vmware.com> 1985 1986commit c5ca599361c87ec816db92d4f9841143f8601934 1987Author: Thomas Hellstrom <thellstrom@vmware.com> 1988Date: Wed Mar 30 11:01:06 2011 +0200 1989 1990 vmwlegacy: Fix a bug in screen dimension calculation 1991 1992 This bug resulted in incorrect screen dimensions and DPI being calculated 1993 in some circumstances, leading to among other things bad aspect ratios in xine. 1994 1995 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 1996 1997commit c02d5977015983473a9bbae97ec65ce70a5faa3b 1998Author: Thomas Hellstrom <thellstrom@vmware.com> 1999Date: Tue Mar 29 13:03:39 2011 +0200 2000 2001 vmwlegacy: Make sure we draw the colorkey to the right drawable 2002 2003 Don't draw the colorkey to the screen drawable, but to the video drawable 2004 when possible. 2005 2006 Also change the Xv API/ABI test to use the builtin ABI version 2007 functions. 2008 2009 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2010 Reviewed-by: Michel D�nzer <daenzer@vmware.com> 2011 2012commit b234d7d6925b480a9c4fe23e5100e6fe7e5c0eac 2013Author: Thomas Hellstrom <thellstrom@vmware.com> 2014Date: Tue Mar 29 11:18:24 2011 +0200 2015 2016 vmwlegacy: Silence a number of warnings 2017 2018 This potentially also fixes a use of an uninitialized pointer value, which 2019 may cause OOM or segfaults. 2020 2021 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2022 Reviewed-by: Michel D�nzer <daenzer@vmware.com> 2023 2024commit cdb04224db69a6b3beb66c99879e20917b8b0fb2 2025Author: Thomas Hellstrom <thellstrom@vmware.com> 2026Date: Fri Mar 25 19:17:00 2011 +0100 2027 2028 vmwlegacy: Fix segfault and setup of initial mode. 2029 2030 The fact that modes were added without names caused segfaults on older 2031 X servers. At least up to and including Xserver 1.4. 2032 2033 Also, for some reason, at least Xserver 1.4 insists on setting the first mode 2034 in the modelist, even if we set another mode as the current one. 2035 2036 Work around this by inserting a new mode with the current screen dimensions, 2037 and add that modename last to the array of display requested mode names. 2038 This means that if none of the previous mode names are found, we will at least 2039 find the newly inserted mode. 2040 2041 Also, if there are no requested mode names at all, the driver previously 2042 chose the largest mode that fit the timings. Now we will, in that case, 2043 always select the newly inserted mode and thus not change resolution unless 2044 specified. 2045 2046 Also add an option to not add this default mode. The option 2047 "AddDefaultMode" is true by default. 2048 2049 Finally when we restore registers at exit and VT switch, make sure we 2050 reprogram the initial width, height and bpp for the next time we start a 2051 server. 2052 2053 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2054 2055commit 9a8f0af8782fd5e9de2d71dfa86fad1d48d52b64 2056Author: Thomas Hellstrom <thellstrom@vmware.com> 2057Date: Thu Mar 3 09:47:48 2011 +0100 2058 2059 Remove unused variable 2060 2061 Signed-off-by: Cyril Brulebois <kibi@debian.org> 2062 Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> 2063 2064commit c208a5380b20f910ab49433abc0d39dce6bb5528 2065Author: Alan Hourihane <alanh@vmware.com> 2066Date: Wed Feb 16 18:53:14 2011 +0100 2067 2068 vmwlegacy: Fix mode lookup 2069 2070 In situations where we have trouble finding a specified mode, 2071 use the resolution given by the width and height device registers. 2072 2073 Signed-off-by: Alan Hourihane <alanh@vmware.com> 2074 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2075 2076commit 2e5001b7e93c63c2cd25d7d8ebdee8a420c13b96 2077Author: Thomas Hellstrom <thellstrom@vmware.com> 2078Date: Wed Feb 16 18:47:02 2011 +0100 2079 2080 vmwlegacy: Add a missing include 2081 2082 The test for Xserver >= 1.2 in the affected file was always failing. 2083 2084 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2085 Reviewed-by: Michel Dänzer <daenzer@vmware.com> 2086 2087commit b3c244ebd7899a66aa401d2d7b0ddc66ee56e6d7 2088Author: Thomas Hellstrom <thellstrom@vmware.com> 2089Date: Wed Feb 16 17:29:47 2011 +0100 2090 2091 vmwlegacy: Don't attempt to call RRSendConfigNotify on Xservers < 1.2 2092 2093 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2094 Reviewed-by: Alan Hourihane <alanh@vmware.com> 2095 Reviewed-by: Michel Dänzer <daenzer@vmware.com> 2096 2097commit eacfa46ada8562bfb15d3fc6a8af272d88036d2f 2098Author: Michel Dänzer <daenzer@vmware.com> 2099Date: Thu Jan 27 11:09:39 2011 +0100 2100 2101 vmwlegacy: Send ConfigureNotify events on Xinerama state changes with no mode change 2102 2103 Signed-off-by: Michel D�nzer <daenzer@vmware.com> 2104 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2105 2106commit cc66e4a49a4a9ac90940d7866db5bc7621cb7e16 2107Author: Thomas Hellstrom <thellstrom@vmware.com> 2108Date: Thu Jan 27 11:02:44 2011 +0100 2109 2110 Fix crosscompile build for older Xservers v2 2111 2112 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2113 2114commit d1ac343b8894a9b8a34c1dcf4b6aeb57239034c0 2115Author: Thomas Hellstrom <thellstrom@vmware.com> 2116Date: Fri Jan 21 23:07:10 2011 +0100 2117 2118 Revert "Fix crosscompile build for older Xservers" 2119 2120 This reverts commit 16e16390385d890b3666485a40369f4c690d5033. 2121 2122 The fix was bogus as pointed out by Cyril Bruleboid <kibi@debian.org>, and 2123 Gaetan Nadon <memsize@videotron.ca> 2124 2125commit 16e16390385d890b3666485a40369f4c690d5033 2126Author: Thomas Hellstrom <thellstrom@vmware.com> 2127Date: Thu Jan 13 13:17:17 2011 +0100 2128 2129 Fix crosscompile build for older Xservers 2130 2131 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2132 2133commit 5b30df47117bc65fd5f14667671041428e1d00b5 2134Author: Thomas Hellstrom <thellstrom@vmware.com> 2135Date: Thu Jan 13 12:52:14 2011 +0100 2136 2137 vmwlegacy: Remove Write-Combining setups 2138 2139 The virtual CPUs doesn't support it anyway. 2140 Once suggested by Michel Daenzer. 2141 2142 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2143 2144commit 8f8f71f0075d9d5cbbfca93425462ba03c5b8046 2145Author: Thomas Hellstrom <thellstrom@vmware.com> 2146Date: Tue Nov 9 14:31:30 2010 +0100 2147 2148 Bump package version to 11.0.3 for release 2149 2150 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2151 2152commit 30ac6eaf64aa4831025555b72b65843686a35094 2153Author: Jesse Adkins <jesserayadkins@gmail.com> 2154Date: Tue Sep 28 13:29:52 2010 -0700 2155 2156 Purge cvs tags. 2157 2158 Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com> 2159 Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com> 2160 2161commit 083a663bbb186bfb854eda3b9f33d7fc24252ec5 2162Author: Thomas Hellstrom <thellstrom@vmware.com> 2163Date: Thu Sep 16 10:08:12 2010 +0200 2164 2165 Make the modinfo string contain an optional subpatch number 2166 2167 The idea is that the build system assigns this number if needed. 2168 As an example it might be the commit number since the last version tag. 2169 2170 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2171 2172commit 5a2206c328caaed95daf91aff9220d3a51b492bd 2173Author: Thomas Hellstrom <thellstrom@vmware.com> 2174Date: Thu Sep 16 09:58:07 2010 +0200 2175 2176 Make sure we build on 1.4.99. 2177 2178 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2179 2180commit da0f931b90833c7f706ace24b0c9dff2672f1e97 2181Author: Thomas Hellstrom <thellstrom@vmware.com> 2182Date: Wed Sep 8 09:57:35 2010 +0200 2183 2184 vmwlegacy: Fix a segfault in vmwareCursorCloseScreen. 2185 2186 The segfault occured because the named function was using resources that 2187 were already taken down, because VMWARECloseScreen was called very late 2188 in the CloseScreen callchain. 2189 2190 Make sure we wrap the CloseScreen pointers late in ScreenInit to avoid this. 2191 2192 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2193 2194commit 03dca39afa06da04472d56ec4888f010186c6a13 2195Author: Thomas Hellstrom <thellstrom@vmware.com> 2196Date: Tue Sep 7 21:55:28 2010 +0200 2197 2198 vmwlegacy: A number of Xv fixes 2199 2200 Properly init and uninit the port private clipboxes on setup and end. 2201 Clear the port private clipboxes on video stop, to force re-painting 2202 of the colorkey when the stream is resumed. 2203 Make sure the colorkey is painted *before* the overlay is flushed. Some 2204 host implementations seem picky about this. 2205 2206 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2207 2208commit dfb062e024dfd20789ee8d43c7f94640faa5ea9f 2209Author: Thomas Hellstrom <thellstrom@vmware.com> 2210Date: Tue Sep 7 12:17:46 2010 +0200 2211 2212 vmware/vmwlegacy: Silence compilation errors and -warnings. 2213 2214 Silence warnings and errors on various server versions due to incorrect 2215 usage of libc functions. 2216 2217 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2218 2219commit 12e4577c020c6905d09459d833fd1c5313f1647b 2220Author: Thomas Hellstrom <thellstrom@vmware.com> 2221Date: Fri Sep 3 11:19:01 2010 +0200 2222 2223 vmwlegacy: Always scale screen dimensions to the initial DPI on modeswitch. 2224 2225 When we switch mode we usually alter the size in a constant DPI environment 2226 rather than keeping the size constant and alter the DPI. 2227 2228 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2229 2230commit 81a0a1a37e703296d109022bb76a1291e84064fd 2231Author: Thomas Hellstrom <thellstrom@vmware.com> 2232Date: Wed Sep 1 07:58:18 2010 +0200 2233 2234 vmware: Handle chain-loader failures gracefully. 2235 2236 If the vmwlegacy driver wasn't present when expected, that would 2237 leave the X server in a confused state. Thus report loading errors properly 2238 back to the X server. 2239 2240 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2241 2242commit 2a72ea7a1b1519451350e0741d145f513124a208 2243Author: Gaetan Nadon <memsize@videotron.ca> 2244Date: Wed Aug 18 10:57:02 2010 -0400 2245 2246 vmwarectrl: rework standalone package as a subdir of driver 2247 2248 vmwarectrl is a unit test client tool for developers. 2249 By default, it is not built unless --enable-vmwarectrl-client is used. 2250 2251 Acked-by: Thomas Hellstrom <thellstrom@vmware.com> 2252 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 2253 2254commit f51ca2cb756dcd541a27f0326496f0aadab3f214 2255Author: Thomas Hellstrom <thellstrom@vmware.com> 2256Date: Wed Aug 18 11:34:49 2010 +0200 2257 2258 Make the driver build and run without libdrm. 2259 2260 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2261 2262commit 2e6eca3e7bb19ea69db2cc367c9704c7d657db79 2263Author: Thomas Hellstrom <thellstrom@vmware.com> 2264Date: Thu Aug 12 17:43:59 2010 +0200 2265 2266 Only set the first xinerama output as primary. 2267 2268 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 2269 2270commit 456b74e8778ab0c44e8a70aa45f447ff5c562be3 2271Author: Adam Jackson <ajax@redhat.com> 2272Date: Tue Aug 10 11:02:05 2010 -0400 2273 2274 xf86-video-vmware 11.0.2 2275 2276 Signed-off-by: Adam Jackson <ajax@redhat.com> 2277 2278commit c29d24b2ca598011b84387006f03a9360910707f 2279Author: Gaetan Nadon <memsize@videotron.ca> 2280Date: Fri Jul 23 21:02:33 2010 -0400 2281 2282 config: add AM_PROG_CC_C_O for per-target compilation flags 2283 2284 The use of per-target compilation flags with C sources requires 2285 that the macro AM_PROG_CC_C_O be called from configure.ac 2286 2287 If the C compiler does not accept the -c and -o options simultaneously, 2288 define NO_MINUS_C_MINUS_O. This macro actually tests both the compiler 2289 found by AC_PROG_CC, and, if different, the first cc in the path. 2290 The test fails if one fails. This macro was created for GNU Make 2291 to choose the default C compilation rule. 2292 2293 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 2294 2295commit dfbef04f1ff9430a01ca0ca682be32a8606e9e13 2296Author: Gaetan Nadon <memsize@videotron.ca> 2297Date: Wed Jul 21 16:49:04 2010 -0400 2298 2299 config: add comments for main statements 2300 2301commit 0dbd97fe7d411549aa343c25dab9c70087532727 2302Author: Gaetan Nadon <memsize@videotron.ca> 2303Date: Wed Jul 21 16:07:00 2010 -0400 2304 2305 config: replace deprecated use of AC_OUTPUT with AC_CONFIG_FILES 2306 2307 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 2308 2309commit dfaa0b6391ebc32f4e81d8add053eabea44d0881 2310Author: Gaetan Nadon <memsize@videotron.ca> 2311Date: Wed Jul 21 14:37:42 2010 -0400 2312 2313 config: replace deprecated AC_HELP_STRING with AS_HELP_STRING 2314 2315 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 2316 2317commit dd0bb4ac5730331070eac2c39880718eeff3760b 2318Author: Gaetan Nadon <memsize@videotron.ca> 2319Date: Wed Jul 21 14:05:23 2010 -0400 2320 2321 config: replace deprecated AM_CONFIG_HEADER with AC_CONFIG_HEADERS 2322 2323 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 2324 2325commit f07d572611ba072c5952fea526e7178202d36685 2326Author: Gaetan Nadon <memsize@videotron.ca> 2327Date: Wed Jul 21 09:27:42 2010 -0400 2328 2329 config: complete AC_INIT m4 quoting 2330 2331 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 2332 2333commit 79956ca804b4ca6227f878cf794edafefa00d25a 2334Author: Gaetan Nadon <memsize@videotron.ca> 2335Date: Tue Jul 20 21:44:58 2010 -0400 2336 2337 config: remove unrequired AC_SUBST([XORG_CFLAGS]) 2338 2339 This macro is called by PKG_CHECK_MODULES 2340 2341 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 2342 2343commit cee7a37a38f83cd5300a19f17493e43eb532e619 2344Author: Gaetan Nadon <memsize@videotron.ca> 2345Date: Tue Jul 20 20:24:42 2010 -0400 2346 2347 config: remove unrequired AC_HEADER_STDC 2348 2349 Autoconf says: 2350 "This macro is obsolescent, as current systems have conforming 2351 header files. New programs need not use this macro". 2352 2353 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 2354 2355commit 8adb672ac3f754d02e377745c16f64151b50522a 2356Author: Gaetan Nadon <memsize@videotron.ca> 2357Date: Tue Jul 20 19:41:31 2010 -0400 2358 2359 config: remove AC_PROG_CC as it overrides AC_PROG_C_C99 2360 2361 XORG_STRICT_OPTION from XORG_DEFAULT_OPTIONS calls 2362 AC_PROG_C_C99. This sets gcc with -std=gnu99. 2363 If AC_PROG_CC macro is called afterwards, it resets CC to gcc. 2364 2365 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 2366 2367commit d867b84e425cdf66542eebaabd8adb95b8121960 2368Author: Gaetan Nadon <memsize@videotron.ca> 2369Date: Tue Jul 20 18:45:19 2010 -0400 2370 2371 config: update AC_PREREQ statement to 2.60 2372 2373 Unrelated to the previous patches, the new value simply reflects 2374 the reality that the minimum level for autoconf to configure 2375 all x.org modules is 2.60 dated June 2006. 2376 2377 ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.60.tar.gz 2378 2379 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 2380 2381commit 190a6b7e032e37e33dda42482038b8fd1fd9d8af 2382Author: Gaetan Nadon <memsize@videotron.ca> 2383Date: Tue Jul 20 16:15:30 2010 -0400 2384 2385 config: upgrade to util-macros 1.8 for additional man page support 2386 2387 Use MAN_SUBST now supplied in XORG_MANPAGE_SECTIONS 2388 The value of MAN_SUBST is the same for all X.Org packages. 2389 2390commit e647511e4b9b924b0617171c56b3bb485674b3ff 2391Author: Julien Cristau <jcristau@debian.org> 2392Date: Tue Jul 13 11:57:15 2010 +0100 2393 2394 Don't crash the server on Xorg -configure 2395 2396commit 0bd99bb142093c0072147ec3bb665864b4cadef5 2397Author: Fernando Carrijo <fcarrijo@yahoo.com.br> 2398Date: Thu Jul 1 07:18:11 2010 -0300 2399 2400 Purge macros NEED_EVENTS and NEED_REPLIES 2401 2402 Signed-off-by: Fernando Carrijo <fcarrijo@yahoo.com.br> 2403 Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com> 2404 Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com> 2405 2406commit f307f77a34f3a6777f74458819f6a3519c2c3f2b 2407Author: Gaetan Nadon <memsize@videotron.ca> 2408Date: Sun Jun 13 13:10:55 2010 -0400 2409 2410 COPYING: replace stub file with actual Copyright notices. 2411 2412 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 2413 2414commit 423d8a069a2d86068a8f22926a73bc965670315d 2415Author: Michel Dänzer <daenzer@vmware.com> 2416Date: Mon Mar 29 10:19:04 2010 +0200 2417 2418 Fix some issues pointed out by compiler warnings. 2419 2420 * vmware_chain_module() doesn't return any values. 2421 * Remove an unused local variable. 2422 2423commit cc77a36048863640fb1fa9f82b5b0dbf41326872 2424Author: Jakob Bornecrantz <jakob@vmware.com> 2425Date: Thu Mar 18 15:30:36 2010 +0100 2426 2427 Bump for 11.0.1 release. 2428 2429commit a5fb3698a033bfe7789641fd6719d8d4fb054201 2430Author: Jakob Bornecrantz <jakob@vmware.com> 2431Date: Tue Mar 9 08:37:11 2010 +0000 2432 2433 Rework chainloader code to check for vmwgfx userspace driver as well 2434 2435commit bf18be6f458a4612b2ebdd8d2b5894f8884891e4 2436Author: Roland Scheidegger <sroland@vmware.com> 2437Date: Tue Mar 9 16:10:25 2010 +0100 2438 2439 fix a cursor refcounting bug, leading to segfaults 2440 2441 this is similar to what xf86_use_hw_cursor() does, which is replaced by 2442 vmwareUseHWCursor (otherwise, the refcount could reach zero and hence the 2443 cursor deallocated while xf86CursorEnableDisableFBAccess() could still bring 2444 it back to life from the saved cursor). 2445 It is probably insane to do refcounting here, but this needs a xserver fix, 2446 and even if that's fixed this fix here shouldn't hurt (though would be 2447 unnecessary). 2448 2449commit 257614ae9bea54d6a46e4477496500a84853ee37 2450Author: Roland Scheidegger <sroland@vmware.com> 2451Date: Tue Mar 9 16:03:59 2010 +0100 2452 2453 make DEBUG_LOGGING compile 2454 2455commit 29f6a2dca3e680908e938767256c9b995653ca7f 2456Author: Jakob Bornecrantz <jakob@vmware.com> 2457Date: Sun Mar 7 15:02:39 2010 +0000 2458 2459 Print text about none fatal error message with Fatal in it 2460 2461commit 204504861a2847734a04bd976accb0c730733523 2462Author: Jakob Bornecrantz <jakob@vmware.com> 2463Date: Fri Feb 26 16:27:17 2010 +0100 2464 2465 Don't hardcode the module version in the source 2466 2467 As pointed out by Julien Cristau XORG_RELEASE_VERSION 2468 gives us that info from configure.ac. 2469 2470 Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> 2471 2472commit 667263d9410bd0d5832cf08a2a28841fe6326b84 2473Author: Jakob Bornecrantz <jakob@vmware.com> 2474Date: Thu Feb 18 14:11:32 2010 +0100 2475 2476 Bump major for new chainloading driver 2477 2478commit 048fe839f0d761aeba95c324f14bdc5488e9e634 2479Author: Jakob Bornecrantz <jakob@vmware.com> 2480Date: Mon Feb 22 13:20:06 2010 +0100 2481 2482 Link to drm but on for the vmware chainloader driver 2483 2484commit 30964ffa31f4fdbffe563b7d7d20bfbf1ed22969 2485Author: Jakob Bornecrantz <jakob@vmware.com> 2486Date: Thu Feb 18 15:20:31 2010 +0100 2487 2488 Make sure that modinfo strings are unique 2489 2490commit 0f2b02d72e36dc6390c09d6adba13e4101bf3df8 2491Author: Jakob Bornecrantz <jakob@vmware.com> 2492Date: Thu Feb 11 23:18:37 2010 +0100 2493 2494 Add modinfo for vmware_drv.so 2495 2496commit c4f5bf8ea45b80c2ac4a5eec65ff58f148fb2807 2497Author: Jakob Bornecrantz <jakob@vmware.com> 2498Date: Thu Feb 11 22:04:53 2010 +0100 2499 2500 Add a chain loading module to load new vmwgfx driver if kernel module is loaded 2501 2502commit 0d9d1724dbe113dcc02736a8ca80ab540057cb5e 2503Author: Alan Coopersmith <alan.coopersmith@sun.com> 2504Date: Fri Jan 15 14:13:42 2010 -0800 2505 2506 Update Sun license notices to current X.Org standard form 2507 2508 Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com> 2509 2510commit e0d370ae5f307d96e9dd9384cc0ea66a0f6c06c1 2511Author: Gaetan Nadon <memsize@videotron.ca> 2512Date: Tue Dec 15 22:01:02 2009 -0500 2513 2514 configure.ac: remove unused sdkdir=$(pkg-config...) statement 2515 2516 The sdkdir variable isn't use, so remove the statement. 2517 2518 Acked-by: Dan Nicholson <dbn.lists@gmail.com> 2519 2520 Signed-off-by: Gaetan Nadon <memsize@videotron.ca> 2521 2522commit 991830e39c34d0a4530a5c5023ec92cf0d7395b0 2523Author: Michel Dänzer <daenzer@vmware.com> 2524Date: Tue Dec 29 17:53:35 2009 +0100 2525 2526 Bump for 10.16.9 release. 2527 2528commit 5a36fcb6a5899e5cfdf6d65e05e3f999d5d25b2a 2529Author: Michel Dänzer <daenzer@vmware.com> 2530Date: Tue Dec 29 17:00:45 2009 +0100 2531 2532 VMWAREComposite: Only hide cursor if source picture is backed by drawable. 2533 2534 Should fix https://bugs.freedesktop.org/show_bug.cgi?id=14208 . 2535 2536commit 4bec18ab8dffd90ab84b986de2136a9d848d3a4a 2537Author: Michel Dänzer <daenzer@vmware.com> 2538Date: Tue Dec 29 16:41:16 2009 +0100 2539 2540 vmware: Fix crash with xserver >= 1.7. 2541 2542 Fixes https://bugs.freedesktop.org/show_bug.cgi?id=24541 . 2543 2544commit 74c830e61bdf700c7e422aaa5b1a0136561295dd 2545Author: Gaetan Nadon <memsize@videotron.ca> 2546Date: Mon Nov 23 09:25:06 2009 -0500 2547 2548 Makefile.am: add ChangeLog and INSTALL on MAINTAINERCLEANFILES 2549 2550 Now that the INSTALL file is generated. 2551 Allows running make maintainer-clean. 2552 2553commit e8f5a924226aacc280923aed661b5a821fdaffe8 2554Author: Gaetan Nadon <memsize@videotron.ca> 2555Date: Wed Oct 28 14:41:41 2009 -0400 2556 2557 INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206 2558 2559 Automake 'foreign' option is specified in configure.ac. 2560 Remove from Makefile.am 2561 2562commit edb6fcb49bae735c45d9565f7aa8313396cf3b15 2563Author: Gaetan Nadon <memsize@videotron.ca> 2564Date: Wed Oct 28 14:09:10 2009 -0400 2565 2566 INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206 2567 2568 Add missing INSTALL file. Use standard GNU file on building tarball 2569 README may have been updated 2570 Remove AUTHORS file as it is empty and no content available yet. 2571 Remove NEWS file as it is empty and no content available yet. 2572 2573commit dcb3d3ed2ba2129b433eee0d18ec86e1e0a6f21f 2574Author: Gaetan Nadon <memsize@videotron.ca> 2575Date: Mon Oct 26 12:54:23 2009 -0400 2576 2577 Several driver modules do not have a ChangeLog target in Makefile.am #23814 2578 2579 The git generated ChangeLog replaces the hand written one. 2580 Update configure.ac to xorg-macros level 1.3. 2581 Use XORG_DEFAULT_OPTIONS which replaces four XORG_* macros 2582 Update Makefile.am to add ChangeLog target if missing 2583 Remove ChangeLog from EXTRA_DIST or *CLEAN variables 2584 This is a pre-req for the INSTALL_CMD 2585 2586commit a9dc11de80966fe00efb6c061a6df00678f80b1f 2587Author: Gaetan Nadon <memsize@videotron.ca> 2588Date: Thu Oct 22 13:06:19 2009 -0400 2589 2590 .gitignore: use common defaults with custom section # 24239 2591 2592 Using common defaults will reduce errors and maintenance. 2593 Only the very small or inexistent custom section need periodic maintenance 2594 when the structure of the component changes. Do not edit defaults. 2595 2596commit 082d1689a8e017d29b108ed3a251141ddf32a35d 2597Author: Gaetan Nadon <memsize@videotron.ca> 2598Date: Thu Oct 22 12:34:18 2009 -0400 2599 2600 .gitignore: use common defaults with custom section # 24239 2601 2602 Using common defaults will reduce errors and maintenance. 2603 Only the very small or inexistent custom section need periodic maintenance 2604 when the structure of the component changes. Do not edit defaults. 2605 2606commit 6c8fc7b280295b823675285ed78b0fb2365bcf07 2607Author: Philip Langdale <philipl@fido2.homeip.net> 2608Date: Tue Sep 8 22:21:33 2009 -0700 2609 2610 Bump fo 10.16.8 Release 2611 2612commit e3e3d8d2488bd289660943e9038bdbe29e11cf77 2613Author: Gaetan Nadon <memsize@videotron.ca> 2614Date: Mon Sep 7 11:12:13 2009 -0400 2615 2616 xf86-video-vmware: Remove unused .cvsignore file #23776 2617 2618 Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> 2619 2620commit cce33db3f95c6f3c8537c782063b6ca9ad68f332 2621Author: Dave Airlie <airlied@redhat.com> 2622Date: Tue Jul 28 15:22:42 2009 +1000 2623 2624 vmware: change to using ABI version check 2625 2626commit 0fddce5511b761206bb5f59dcd17652f15bda5ef 2627Author: Dave Airlie <airlied@redhat.com> 2628Date: Tue Jul 28 14:11:59 2009 +1000 2629 2630 vmware: fix resource removal properly 2631 2632commit 4605e8d3a99ddcd75314051bd00b51d8ecee06a1 2633Author: Dave Airlie <airlied@redhat.com> 2634Date: Tue Jul 28 13:32:41 2009 +1000 2635 2636 vmware: update for resources/RAC API removal 2637 2638commit 382c25f53870da0db0ee74f343c20c312e6b03af 2639Author: Philip Langdale <philipl@fido2.homeip.net> 2640Date: Mon Jul 20 18:03:47 2009 -0700 2641 2642 Bump for 10.16.7 Release. 2643 2644commit c2d9678431a40f6a15dc7f50690507cdda8d11e2 2645Author: Micah Dowty <micah@vmware.com> 2646Date: Mon Jun 1 10:47:51 2009 -0700 2647 2648 An imperfect fix for Xinerama state changes without a mode change 2649 2650 This patch improves behaviour for Xinerama state changes (via the 2651 VMWARE_CTRL) extension that don't have an accompanying mode change. 2652 This will be the case if a new Xinerama monitor layout has a bounding 2653 box with an identical size to that of the previous layout. 2654 2655 Prior to this patch, the behaviour was pretty bad. If you sent two 2656 Xinerama states with the same bounding box, the second state would 2657 be set as pending but no actual mode change would occur, because 2658 the X server would already be in the right video mode. This means 2659 that the pending mode stays pending. 2660 2661 If another Xinerama state comes in after this, we would hit our 2662 "Aborting due to existing pending state" error, and the new state 2663 would be discarded. This means we'd drop the mode switch on the 2664 floor, plus we'd lie to the client and say it worked. 2665 2666 One example of the user-visible symptoms from this: The user has 2667 four monitors of the same size. We'll call them A through D. 2668 The VM goes into full-screen mode, and they set it to use screens 2669 ABC. Now they switch to BCD. These have the same bounding box size, 2670 so no mode change occurs and a topology is still pending. Now they 2671 switch to monitors BC. This mode switch is dropped, so the guest 2672 is still in the ABC topology and the mode is too wide for BC. 2673 2674 This patch is an incomplete fix. If we're setting a new topology 2675 with the same bounding box, we'll flush the Xinerama state 2676 immediately since we know the mode switch will never occur. This 2677 means we don't get stuck with xineramaNextState set when it 2678 shouldn't be, and we don't have the problem with dropping 2679 subsequent mode changes. We also do set the new Xinerama state, 2680 so apps that query it will see the updated state immediately. 2681 2682 But the fix isn't perfect- as far as I can tell, there's no way 2683 to notify applications that the monitor layout changed without 2684 a mode switch. So even though we've set the new topology, most 2685 apps won't notice. There are ways we could hack around this, 2686 but none of them are pretty. 2687 2688commit d10841493c4707f23f928d7580bc5bddb51d22a6 2689Author: Bob Long <blong@vmware.com> 2690Date: Fri May 22 15:48:55 2009 -0700 2691 2692 Fix black screen after resume from hibernate. 2693 2694 The root cause for the black screen and system lock up is 2695 caused by not recovering the SVGA ID register after hibernation. 2696 Incorrect ID register value will invalidate the FIFO memory start 2697 register, and driver will not retrieve correct FIFO memory start 2698 address and the busy read of svga FIFO sync register will lock up 2699 the whole system. 2700 2701 Currently SVGA Xorg driver does not have a kernel module to handle 2702 the power management event, but Xorg will call driver provided 2703 LeaveVT before shutting down system and call EnterVT after resuming 2704 system from hibernation, so these two callback functions are good 2705 entry points to save and restore the ID register value. This patch 2706 saves the ID register value in LeaveVT and restores the value to 2707 SVGA ID register in EnterVT. 2708 2709commit b4ea3052f843c2d1c285252cbf1bed2f4857f96c 2710Author: Philip Langdale <philipl@fido2.homeip.net> 2711Date: Tue May 12 16:48:43 2009 -0700 2712 2713 Bump for 10.16.6 release 2714 2715commit 8e15f6669ff2cb5bf4260ac87a481a4e38044b26 2716Author: Micah Dowty <micah@vmware.com> 2717Date: Tue May 12 16:46:39 2009 -0700 2718 2719 Better cursor size limit and explanation 2720 2721 Increase the cursor size limit to 64x64, and give a 2722 better explanation of the host's cursor size limits. 2723 2724commit bfa3dfc27b05d4a2deff230f8241bd44f72fb7a0 2725Author: Micah Dowty <micah@vmware.com> 2726Date: Tue May 12 16:46:00 2009 -0700 2727 2728 Allow cursor updates while unhidden 2729 2730 This change just adds a flag to our hardware cursor, 2731 telling Xorg that it doesn't need to hide the cursor 2732 when updating its shape. This fixes the cursor flicker 2733 in X11. 2734 2735commit dccc9376a4fb1cba9c35b7617989608497fca7be 2736Author: Micah Dowty <micah@vmware.com> 2737Date: Tue May 12 16:45:29 2009 -0700 2738 2739 Unbreak vmwarectrl setres 2740 2741 The vmwarectrl tool's "setres" command was unusable, 2742 because it looks like someone added the settopology 2743 test without updating the argument indices for setres. 2744 This patch makes setres usable again. 2745 2746commit b7dbdd28764a8f3883833ab818a7b7314632b0b2 2747Author: Micah Dowty <micah@vmware.com> 2748Date: Tue May 12 16:44:42 2009 -0700 2749 2750 Fix dynamic mode edge cases 2751 2752 The VMware Xorg driver supports dynamic modelines that can be set from 2753 userspace via an X extension. These are used to implement VM features 2754 which need to automatically change the resolution of the guest OS. 2755 2756 This driver implements the feature using two modelines. The driver 2757 would alternately update one mode then the other, so that in typical 2758 usage one mode is current and the other is available for the next mode 2759 switch. 2760 2761 This usually worked, but there were many edge cases that could cause 2762 this alternating pattern to get 'out of sync', so we'd end up changing 2763 the resolution of the current video mode. This could end up putting 2764 the X server in a state where the screen resolution has been changed, 2765 but the hardware was never reprogrammed for the new resolution. 2766 2767 This patch fixes the problem by explicitly searching for a dynamic 2768 mode that isn't currently in use. We no longer rely on the alternating 2769 pattern. 2770 2771commit cfe8793180ec633dd7a17d059ad882ef461ed1d9 2772Author: Micah Dowty <micah@vmware.com> 2773Date: Tue May 12 16:43:13 2009 -0700 2774 2775 Update README 2776 2777 Updates the copyright date, and replaces the rather out-of-date 2778 2D documentation with a link to the updated 2D and 3D docs on 2779 Source Forge. 2780 2781commit e3769142d80953d6da484eb979f5274c8a3abeb3 2782Author: Shelley Gong <shelleygong@vmware.com> 2783Date: Thu Apr 16 13:28:47 2009 -0700 2784 2785 Automatically add modelines for the driver's built-in set of modes. 2786 2787 The driver has had a built-in set of modes for a while, but there 2788 was nothing adding modelines to back them up, causing initial modes 2789 to be rejected at startup with certain Xorg versions. 2790 2791 This change adds the actual modelines for sufficiently new versions 2792 of the server (>= 1.2), as the necessary calls were only introduced 2793 at that time. 2794 2795commit 3c223e8f7b03e2d7f8c31faeeeeb37030c461176 2796Author: Alan Coopersmith <alan.coopersmith@sun.com> 2797Date: Fri Jan 9 16:39:07 2009 -0800 2798 2799 Remove xorgconfig & xorgcfg from See Also list in man page 2800 2801commit 1bbef3aa7ab15ee93cd4cd47c3d484ac91f0440d 2802Author: Philip Langdale <philipl@fido2.homeip.net> 2803Date: Tue Aug 19 11:23:44 2008 -0700 2804 2805 Bump version for 10.16.5 release. 2806 2807commit 6ea8e5000519865dd936cfe82d67efc7d107a28c 2808Author: Bankim Bhavsar <bbhavsar@vmware.com> 2809Date: Tue Aug 19 11:23:02 2008 -0700 2810 2811 Add RegionEqual function for older XFree86 versions. 2812 2813 Fixes bug : http://bugzilla.eng.vmware.com/show_bug.cgi?id=312853 2814 2815 When we added AUTOPAINT_COLORKEY capability to our VMware video driver, 2816 region functions were used to keep track of colorkey painting. 2817 2818 REGION_EQUAL was one of them. 2819 2820 Unfortunately REGION_EQUAL was not present in regionstr.h shipped with XFree86 version 2821 4.3.0. 2822 This version is used by TurboLinux 10; causing X server to crash while playing videos. 2823 2824 REGION_EQUAL was added in revision 1.8 of regionstr.h and available for xfree86 version 2825 4.3.99 2826 onwards. 2827 Reference: 2828 http://cvsweb.xfree86.org/cvsweb/xc/programs/Xserver/include/regionstr.h.diff?r1=1.7&r2=1.8 2829 2830 When I compiled the existing code(without my change), I see a warning was generated 2831 indicating REGION_EQUAL is not present. 2832 Too bad we missed it. 2833 2834 This patch includes 2835 1) Slightly modified version of miRegionEqual from miRegion.c 2836 2) Some formating cleanup. 2837 2838commit 0576b87c27d3d885cc698a3cc013bcfa4021942c 2839Author: Philip Langdale <philipl@fido2.homeip.net> 2840Date: Mon Jul 21 15:26:01 2008 -0700 2841 2842 Prepare for 10.16.4 release. 2843 2844commit ad8f17dec71632d0e606af1bea9432ece0bc97db 2845Author: Philip Langdale <philipl@fido2.homeip.net> 2846Date: Mon Jul 21 15:23:50 2008 -0700 2847 2848 Video Overlay: Handle clipping correctly with AutoPaint colorkey. 2849 2850 We recently added XV_AUTOPAINT_COLORKEY attribute to the X video driver 2851 to enable applications like Real player that rely on this attribute to 2852 display video frames in Linux guest. 2853 2854 When this attribute is SET, we paint the colorkey on 1st frame and from 2855 there on only when the video is moved. 2856 2857 This introduced a bug 305202 with clipping. 2858 2859 Consider a case when the video is playing, obscure the player window 2860 with another window, without moving the player window, move the other 2861 window away. The part of the window that was obscured didn't display 2862 the video. 2863 2864 With this patch instead of relying on the target rectangle, we use 2865 the clipBoxes supplied in every frame. 2866 2867commit 71f1ca515cd1b3d92397682f4fcea120c392b26e 2868Author: Philip Langdale <philipl@fido2.homeip.net> 2869Date: Fri Jul 18 14:03:09 2008 -0700 2870 2871 Prepare for 10.16.3 2872 2873 Bump up version numbers. 2874 2875commit e7f404938b7ccd4c7e61c71c6c182ca8ee8d875f 2876Author: Philip Langdale <philipl@fido2.homeip.net> 2877Date: Fri Jul 18 13:59:34 2008 -0700 2878 2879 Video Overlay: Add XV_AUTOPAINT_COLORKEY capability to the Xv extension of Linux guest driver. 2880 2881 Applications use XV_AUTOPAINT_COLORKEY capability to let the driver handle the painting 2882 of colorkey. 2883 2884 Real Player assumes this capability as ON by default and hence prior to this patch videos 2885 didn't play with Real player. 2886 2887 With this patch: 2888 a) If AUTOPAINT_COLORKEY is SET then the driver handles the painting of the colorkey. 2889 Painting is done on the 1st frame and from there on only if the video frame moves. 2890 2891 b) Adds UYVY fourcc format to keep it consistent with Windows SVGA driver and the host backends. 2892 2893 c) Changes the default colorkey from a pungent GREEN to a darker shade. 2894 Real Player sets this colorkey and it looks better when the video is moved around. 2895 2896commit 0705e7093e42f7a5ae909477150fd5bb416f8da0 2897Author: Vinay Bondhugula <vinayb@vmware.com> 2898Date: Wed Jul 2 21:32:44 2008 -0400 2899 2900 Trivial fix: Delete ASSERT() statement 2901 2902 Delete the ASSERT() statement that got introduced in the previous check-in. 2903 2904commit f4b5158960c3402e18a0fcf0e0211b68b0f0f127 2905Author: Vinay Bondhugula <vinayb@vmware.com> 2906Date: Wed Jul 2 18:17:58 2008 -0400 2907 2908 Fix video overlay offscreen allocation bug 2909 2910 When Kaffeine player stops a video, it sets the cleanup flag to FALSE and may 2911 start playing the next video. In its present state the driver does not check or 2912 clean up the offscreen area. This is a bug as the newer video might need more 2913 offscreen space for its frame. The fix is to check for the offscreen frame size 2914 in videoPlay and restart the stream if necessary. 2915 2916commit b53bb2ad4c6f6e378cbf82a98cac917736d62740 2917Author: Vinay Bondhugula <vinayb@vmware.com> 2918Date: Thu Jun 12 17:34:30 2008 -0400 2919 2920 Prepare for 10.16.2 2921 2922 Bump up version numbers. 2923 2924commit 1f7a8390a32852d2ff0039a7d8138a292d17b50a 2925Author: Vinay Bondhugula <vinayb@vmware.com> 2926Date: Tue Apr 29 18:29:11 2008 -0400 2927 2928 Fix VMWARE_CTRL and Xinerama Initialization 2929 2930 Move initialization code for the vmware control and xinerama extensions to 2931 VMWAREScreenInit(), so that auto-resize and multi-mon work fine after a user 2932 logs out and logs in again in a graphical display manager. 2933 2934commit db027200474684c0aa4b9387f3ed53b2e5f24478 2935Author: Vinay Bondhugula <vinayb@vmware.com> 2936Date: Tue Apr 22 14:18:45 2008 -0400 2937 2938 More xorg and xfree86 backwards compatibility 2939 2940 Push most of the xorg-server version checking into the configure script. With 2941 this change, unmodified driver source compiles in the XFree86 4.3 tree. 2942 2943commit 6849c0a5fbf10722ca475d2ffcce7d0d95d2377a 2944Author: Vinay Bondhugula <vinayb@vmware.com> 2945Date: Fri Apr 18 18:00:38 2008 -0400 2946 2947 Change // comments to /* 2948 2949 This will make it easier to compile the driver against ancient versions of X. 2950 2951commit b6c59761e2b984be32493f35224db523dd62bcd8 2952Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br> 2953Date: Thu Apr 17 23:04:45 2008 -0400 2954 2955 Compile warning fixes 2956 2957 Major problem was prototype vmwareInitVideo not matching implementation 2958 vmwareVideoInit. Remaining are adding an "ansification" of a function without 2959 arguments, and removing/disabling unused variables/functions. 2960 2961commit 7870dc715b1efe173af1e2664778e2066508e066 2962Author: Vinay Bondhugula <vinayb@vmware.com> 2963Date: Thu Apr 17 20:54:23 2008 -0400 2964 2965 Bump version to 10.16.1 in configure.ac 2966 2967 The previous change didn't bump up the version in configure.ac. 2968 2969commit be75c66fa7933c7dfa86e5514c744f47734c5fc8 2970Author: Vinay Bondhugula <vinayb@vmware.com> 2971Date: Thu Apr 17 20:39:02 2008 -0400 2972 2973 Prepare for 10.16.1 2974 2975 Update the modinfo section and make a configure.ac fix. 2976 2977commit 87e9b32618f037d78d7853b48e40a71533b764d2 2978Author: Vinay Bondhugula <vinayb@vmware.com> 2979Date: Thu Apr 17 19:16:48 2008 -0400 2980 2981 Fix build for all modular versions of Xorg 2982 2983 This change makes the video driver compile with Xorg 7.0. There are a couple of 2984 trivial changes that bring down the maximum Xserver version down to 2.0. Hacky, 2985 but good enough for now. 2986 2987commit e4fa13951a7c5dd53005a63392a439e2329fab9c 2988Author: Vinay Bondhugula <vinayb@vmware.com> 2989Date: Wed Mar 26 21:32:47 2008 -0400 2990 2991 Send down guest display topology 2992 2993 Send down the Xinerama topology from the guest down to the host, by setting 2994 display topology registers in the SVGA device. 2995 2996commit 5aced9e39a0bf7590c841824c0b66060eb7d5e03 2997Author: Adam Jackson <ajax@redhat.com> 2998Date: Wed Mar 19 17:03:18 2008 -0400 2999 3000 vmware 10.16.0 3001 3002commit cd8bb3018946e82b98207984efc26b13ac260e5e 3003Author: Adam Jackson <ajax@redhat.com> 3004Date: Wed Mar 19 17:00:41 2008 -0400 3005 3006 Fix distcheck. 3007 3008commit 1314a1cd22823a5a7202dac4ac04da3801f1ec94 3009Author: Bankim Bhavsar <bbhavsar@vmware.com> 3010Date: Fri Mar 14 12:42:40 2008 -0400 3011 3012 Video Overlay: Source video parameters 3013 3014 This patch adds parameters to the source video frame. Applications can request 3015 only a subset of the source video frame to be displayed. These parameters are 3016 srcX, srcY, srcWidth and srcHeight. width and height represent the entire 3017 source video frame. 3018 3019commit fdef3fd5ea62a2df6283d48ba18d5c60300534ef 3020Author: Matthieu Herrb <matthieu.herrb@laas.fr> 3021Date: Sun Mar 9 00:08:32 2008 +0100 3022 3023 Makefile.am: nuke RCS Id 3024 3025commit bfd8398dde2d2de238c600eece9374d24d7d8549 3026Author: Bankim Bhavsar <bbhavsar@vmware.com> 3027Date: Wed Jan 23 22:13:07 2008 -0800 3028 3029 Xv extension for VMware's video driver 3030 3031 This patch implements the Xv extension for VMware's X video driver. 3032 3033 The Xv specification can be found here 3034 http://www.xfree86.org/current/DESIGN16.html 3035 3036 I've written a trivial offscreen memory manager that allocates memory from the 3037 bottom part of the Video RAM and it can handle only 1 video-stream. Eventually 3038 we intend to support upto 32 video-streams (there is already support for 3039 multiple video streams in respective backends). 3040 3041commit a33ab73ffa5d3797d16c3a265ddefc56a5a93b6b 3042Author: Vinay <vinay@vinayb-dev4.(none)> 3043Date: Sat Jan 19 08:39:24 2008 -0800 3044 3045 Trivial libpciaccess related fix 3046 3047 Fix VMWAREUnmapMem to correctly unmap memory for the libpciaccess case. 3048 3049commit 62d898669baccfd4c312f3ed8f228d0c3217d3c3 3050Author: Vinay Bondhugula <vinayb@vmware.com> 3051Date: Mon Oct 8 10:54:04 2007 -0700 3052 3053 Port to libpciaccess. 3054 3055commit 73db59fd82ced7a88f6da35d5088608e163f3d86 3056Author: Philip Langdale <philipl@fido2.homeip.net> 3057Date: Tue Sep 25 16:06:38 2007 -0700 3058 3059 Update for 10.15.2 release 3060 3061commit ee2fe14d37c9f3c8a170f8e3fcbc62403687ab8f 3062Author: Philip Langdale <philipl@fido2.homeip.net> 3063Date: Mon Sep 24 11:48:12 2007 -0700 3064 3065 There are problems when running with old X releases with a 3066 global symbol collision with the mouse driver. 3067 3068commit cfdb0140fa53155ae134ba961ec7d593d5d94713 3069Author: Philip Langdale <philipl@fido2.homeip.net> 3070Date: Mon Sep 10 21:19:38 2007 -0700 3071 3072 Guard modinfo section against gcc. 3073 3074commit e41aef1fb187c1b450fbea0163eb16e0c40f0435 3075Author: Philip Langdale <philipl@fido2.homeip.net> 3076Date: Mon Sep 10 21:16:04 2007 -0700 3077 3078 Ready 10.15.1 release. 3079 3080 To allow for easier detection of driver version by other VMware tools, 3081 we are embedding the version in a .modinfo section so that the Linux 3082 kernel 'modinfo' tool can be (ab)used to check it. 3083 3084commit 2331c7d1629f9841c02cf907ef4fa8b679cc5141 3085Author: James Cloos <cloos@jhcloos.com> 3086Date: Mon Sep 3 05:52:51 2007 -0400 3087 3088 Add *~ to .gitignore to skip patch/emacs droppings 3089 3090commit ec4dc29434bbbcf382de51fe3355679654489ad7 3091Author: Philip Langdale <philipl@fido2.homeip.net> 3092Date: Mon Jul 9 13:45:22 2007 -0700 3093 3094 Update copyright date. 3095 3096commit 0c76b95e7aeac034cc598ea6a407187f76466411 3097Author: Philip Langdale <philipl@fido2.homeip.net> 3098Date: Fri Feb 9 15:06:17 2007 -0800 3099 3100 Add svga_modes.h to Makefile.am 3101 3102commit a283c62c1db9e25ba11c6d72e4d00e0d911d64a2 3103Author: Philip Langdale <philipl@fido2.homeip.net> 3104Date: Fri Feb 9 11:09:17 2007 -0800 3105 3106 Filter out default modes that are larger than the hardware 3107 maxmimum size and add an explicit mode for the hardware 3108 maximum. 3109 3110commit f4540555dc8c823dfec53dddeb82e2b7b0dbfe3d 3111Author: Philip Langdale <philipl@fido2.homeip.net> 3112Date: Fri Feb 9 10:00:32 2007 -0800 3113 3114 Correct the incorrect 1080p resolution. 3115 3116 Should be 1920x1080 and not 1900x1080. Whoops. 3117 3118commit eca6e9f9458440feebd6598aee24f02a3fd7a75f 3119Author: Philip Langdale <philipl@fido2.homeip.net> 3120Date: Thu Feb 8 18:22:16 2007 -0800 3121 3122 Bump version to 10.15.0 3123 3124 This release adds truely usable resizing support by 3125 removing the restriction that the you cannot resize 3126 larger than the initial mode. 3127 3128commit 2ec8c25cc935a318bd07c0d1fba9960dfe8f38d4 3129Author: Philip Langdale <philipl@fido2.homeip.net> 3130Date: Thu Feb 8 18:07:19 2007 -0800 3131 3132 Fix a race condition when switching to a multihead fullscreen mode. 3133 3134 Due to implemtation details on the host side, switching to a multihead 3135 fullscreen mode means multiple mode changes along the way. However, 3136 because rrSetScreenConfig returns before the mode change completes, 3137 we can enter a race, where a subsequent SetDisplayTopology overrides 3138 the current pending one, leading to a mode switch where the resolution 3139 and topology are no longer consistent. 3140 3141 So, we fix this by ignoring any attempts to set the pending topology if 3142 one is already pending. 3143 3144commit a8afe781e108773e4a575ecc3330a5aa83c1cbb9 3145Author: Philip Langdale <philipl@fido2.homeip.net> 3146Date: Thu Feb 8 17:08:08 2007 -0800 3147 3148 Add a bunch of useful modes to the mode list. 3149 3150 The X server prunes modes above the initial mode and 3151 the number of default modes varies with distro and 3152 server version. As it's easy to do, let's add a bunch 3153 of useful versions in the driver so that users don't 3154 have to mess with their config files as often. 3155 3156commit 520f570aa3869090eac3accf6a2b3886ab188590 3157Author: Philip Langdale <philipl@fido2.homeip.net> 3158Date: Thu Feb 8 13:44:57 2007 -0800 3159 3160 Update man page to remove mention of the NoAccel option which 3161 no longer exists as we don't do any 'acceleration'. 3162 3163commit af8c0596a224ba8436d55c5dd6063fff688c7ad1 3164Author: Philip Langdale <philipl@fido2.homeip.net> 3165Date: Thu Feb 8 13:42:31 2007 -0800 3166 3167 Remove XAA 'acceleration'. 3168 3169 We have a lot of stale code to 'accelerate' certain operations 3170 through XAA. However, in practice, this acceleration is 3171 completely unhelpful because whenever we encounter an 3172 unaccelerated action, we have to sync and flush the fifo 3173 which kills any performance gain. 3174 3175 As such, the virtual hardware doesn't even advertise these 3176 acceleration capabilities anymore, so the code is completely 3177 unusued. 3178 3179 In addition, XAA is on the way out, so there's no point 3180 leaving in dead code which will have to go in the fairly 3181 near future. 3182 3183 The one operation we can meaningfully accelerate is a 3184 front-only fill and when we get around to implementing 3185 that, we'll use EXA instead. 3186 3187commit 3dc1ebc7c2c76f575b5150f1890ec13f8bd3e8a1 3188Author: Philip Langdale <philipl@fido2.homeip.net> 3189Date: Thu Feb 8 10:33:14 2007 -0800 3190 3191 Make resizing work once and for all. 3192 3193 This change removes the limitation on resizing larger than the 3194 initial size and removes the need for pitch-locking bu resizing 3195 the screen pixmap. Now the only limit on the screen size is 3196 the maximum width/height reported by the virtual hardware which 3197 is configured on the host side. 3198 3199commit 188c2b44f0f47093092414f9364a52cc2d5016ad 3200Author: Eamon Walsh <ewalsh@tycho.nsa.gov> 3201Date: Mon Dec 18 14:05:19 2006 -0500 3202 3203 Revert "Convert callers of LookupWindow() to dixLookupWindow()." 3204 3205 This reverts commit 1f298c24fe1dde35f0d77cc34518eb9c2b873fc5. 3206 3207commit 1f298c24fe1dde35f0d77cc34518eb9c2b873fc5 3208Author: Eamon Walsh <ewalsh@tycho.nsa.gov> 3209Date: Fri Dec 15 17:41:52 2006 -0500 3210 3211 Convert callers of LookupWindow() to dixLookupWindow(). 3212 3213commit 9d41384616c8f6d00b53a61634f73e728d86d615 3214Author: Philip Langdale <philipl@fido2.homeip.net> 3215Date: Wed Dec 6 16:48:12 2006 -0800 3216 3217 Explicitly initialise buffer to NULL for parsing xinerama topologies. 3218 3219commit ac2a57ea7aea00c695495aa01c27402569a9514a 3220Author: Philip Langdale <philipl@fido2.homeip.net> 3221Date: Tue Oct 31 19:17:39 2006 -0800 3222 3223 Update man page to document "StaticXinerama" 3224 3225commit 4dd038bd73208184344cae4f363c492c7e61524b 3226Author: Philip Langdale <philipl@fido2.homeip.net> 3227Date: Tue Oct 31 19:12:29 2006 -0800 3228 3229 Bump version to 10.14.0 3230 3231commit 73945118a6b3cad60f4a1927b9394206d36e8281 3232Author: Philip Langdale <philipl@fido2.homeip.net> 3233Date: Mon Oct 30 11:52:57 2006 -0800 3234 3235 Fix more warnings. 3236 3237commit e0dca2ff0b695b60830cf8f10a2c0585602a4d40 3238Author: Philip Langdale <philipl@fido2.homeip.net> 3239Date: Mon Oct 30 10:53:18 2006 -0800 3240 3241 Fix some warnings noted when compiling the code against 3242 older Xorg versions. 3243 3244commit f96d12047725becf0515cc4df8572ca4a3956309 3245Author: Philip Langdale <philipl@fido2.homeip.net> 3246Date: Wed Oct 25 18:06:13 2006 -0700 3247 3248 Refactor static Xinerama parsing. 3249 3250commit 57b32570f84d06180be2c9d249174b04f02d9fca 3251Author: Philip Langdale <philipl@fido2.homeip.net> 3252Date: Wed Oct 25 10:49:27 2006 -0700 3253 3254 Add support for a static Xinerama configuration to be specified 3255 in xorg.conf. This static configuration will always be used and 3256 any attempts to update it will be ignored. 3257 3258 Note that all xinerama aware apps that I have seen will not 3259 sanity check the xinerama extents against the screen size, so 3260 if the screen doesn't properly enclose the xinerama extents, 3261 expect your apps to punish you accordingly. 3262 3263commit c62a63b00f7c43e265079d31f1bf7ff447423056 3264Author: Philip Langdale <philipl@fido2.homeip.net> 3265Date: Wed Oct 11 11:47:39 2006 -0700 3266 3267 Update .gitignore 3268 3269commit 9345f8146ae41f7d2269e6fea5e3cba385139960 3270Author: Philip Langdale <philipl@fido2.homeip.net> 3271Date: Wed Oct 11 11:47:25 2006 -0700 3272 3273 Add vmwarectrl sample client. 3274 3275commit b35666fdd567d4cd92574aeecadb8e0d41b32d77 3276Author: Philip Langdale <philipl@fido2.homeip.net> 3277Date: Wed Oct 11 11:36:22 2006 -0700 3278 3279 Add .gitignore files. 3280 3281commit 7631f4d8db2b83878bd886204aaa978dac9c47b5 3282Author: Philip Langdale <philipl@fido2.homeip.net> 3283Date: Wed Oct 11 11:32:18 2006 -0700 3284 3285 Document the 'Xinerama' option and tweak the default to reflect 3286 the capabilites of the underlying hardware. 3287 3288commit 79de175986817cac2fedb267cc9a04438b3694d4 3289Author: Philip Langdale <philipl@fido2.homeip.net> 3290Date: Wed Oct 11 11:26:04 2006 -0700 3291 3292 Check for xinerama in configure.ac 3293 3294commit 34e7264e99ceab5e9e2e022ed9a56531845b0b17 3295Author: Philip Langdale <philipl@fido2.homeip.net> 3296Date: Wed Oct 11 10:57:57 2006 -0700 3297 3298 Add xinerama support to the vmware video driver. (Better late than never). 3299 3300 With this change, the VMWARE_CTRL extension is updated so that it can 3301 receive topology updates at runtime. I will add some sample client code 3302 separately. 3303 3304 I also intend to add support for a static initial topology defined in 3305 xorg.conf but I haven't got around to it yet due to hating to write 3306 string parsing code. 3307 3308commit dd201e23cc50ded2f316dbfa5d265608b80d994d 3309Author: Philip Langdale <philipl@fido2.homeip.net> 3310Date: Wed Sep 20 11:40:54 2006 -0700 3311 3312 Add support for the upcoming PITCHLOCK register. The FIFO register 3313 is deprecated but support is retained so the driver works with 3314 Workstation 5.5 and friends. 3315 3316commit 0850feff708ded63c27dc938ca4b9b8fcbed122b 3317Author: Philip Langdale <philipl@fido2.homeip.net> 3318Date: Sun Sep 3 10:45:22 2006 -0700 3319 3320 Fix https://bugs.freedesktop.org/show_bug.cgi?id=8094 3321 Lazily allocate the dynamic modes used for pixel precise guest 3322 resizing. They will not appear until they are neeed. 3323 3324commit 86aeab28b806642946e59a98573c5b25840c35ed 3325Author: Adam Jackson <ajax@nwnk.net> 3326Date: Fri Apr 7 21:57:24 2006 +0000 3327 3328 Unlibcwrap. Bump server version requirement. Bump to 1.1.0. 3329 3330commit fe6963e09a8197f5c11e8a828c8da4024601a466 3331Author: Adam Jackson <ajax@nwnk.net> 3332Date: Fri Apr 7 21:55:49 2006 +0000 3333 3334 Unlibcwrap. Bump server version requirement. Bump to 10.13.0. 3335 3336commit ac83dff5d6a54b05e0377ceac2b133238293fa0e 3337Author: philipl <philipl> 3338Date: Tue Feb 7 18:51:35 2006 +0000 3339 3340 Add VMWARE_CTRL extension. 3341 3342commit a49f1e65147dc1ab805c74951cb0915b1352e8a9 3343Author: philipl <philipl> 3344Date: Tue Jan 17 00:40:43 2006 +0000 3345 3346 Use DriverFunc to adjust physical size to keep DPI constant. 3347 3348commit ff3f9dc930ff6bd2d6a73d56c70b0284a597cd62 3349Author: Kevin E Martin <kem@kem.org> 3350Date: Wed Dec 21 02:30:04 2005 +0000 3351 3352 Update package version for X11R7 release. 3353 3354commit aa1da8e57939081f15db04fa8c654f363f4e4cb7 3355Author: Adam Jackson <ajax@nwnk.net> 3356Date: Mon Dec 19 16:25:56 2005 +0000 3357 3358 Stub COPYING files 3359 3360commit 835f8000fdbdd35a6bbc5eabf1252d4040a798da 3361Author: Kevin E Martin <kem@kem.org> 3362Date: Thu Dec 15 00:24:21 2005 +0000 3363 3364 Update package version number for final X11R7 release candidate. 3365 3366commit 32a969be355c0c948739b4f18e0caa83c78960cc 3367Author: Kevin E Martin <kem@kem.org> 3368Date: Tue Dec 6 22:48:41 2005 +0000 3369 3370 Change *man_SOURCES ==> *man_PRE to fix autotools warnings. 3371 3372commit 643a290d01553c9fefe9b4e268ae515d49cd1af9 3373Author: Kevin E Martin <kem@kem.org> 3374Date: Sat Dec 3 05:49:37 2005 +0000 3375 3376 Update package version number for X11R7 RC3 release. 3377 3378commit 9d0f12ee6bf340765317214ffef2f70883025e9e 3379Author: Kevin E Martin <kem@kem.org> 3380Date: Fri Dec 2 02:16:12 2005 +0000 3381 3382 Remove extraneous AC_MSG_RESULT. 3383 3384commit e0a08567f46f73005589876d38e3f5ff7543557b 3385Author: Adam Jackson <ajax@nwnk.net> 3386Date: Tue Nov 29 23:30:06 2005 +0000 3387 3388 Only build dlloader modules by default. 3389 3390commit c80ca69d0160b78e8d2bbeae01de52978f8e581f 3391Author: Alan Coopersmith <Alan.Coopersmith@sun.com> 3392Date: Mon Nov 28 22:04:15 2005 +0000 3393 3394 Change *mandir targets to use new *_MAN_DIR variables set by xorg-macros.m4 3395 update to fix bug #5167 (Linux prefers *.1x man pages in man1 subdir) 3396 3397commit 417099c602463ff364f70a938c4a2d2275d8a5b7 3398Author: Eric Anholt <anholt@freebsd.org> 3399Date: Mon Nov 21 10:49:23 2005 +0000 3400 3401 Add .cvsignores for drivers. 3402 3403commit 26a28492f738defa0445059c2dd6bb9cad89d0aa 3404Author: Kevin E Martin <kem@kem.org> 3405Date: Wed Nov 9 21:31:21 2005 +0000 3406 3407 Bump version numbers for X11R6.9/X11R7 RC2. 3408 3409commit 9ba2f5c58f6ffc9533f5d1852b6d7ba25fa4785a 3410Author: Kevin E Martin <kem@kem.org> 3411Date: Wed Nov 9 21:15:23 2005 +0000 3412 3413 Update package version number for X11R7 RC2 release. 3414 3415commit 731860b1fea54f2ce54fbf02ab77d7c01f381f80 3416Author: nolan <nolan> 3417Date: Thu Nov 3 04:26:00 2005 +0000 3418 3419 Fix a bug where the cursor disappears. Committed on behalf of Shelley Gong 3420 (shelleygong@vmware.com). 3421 3422commit 623b3c8297fc0b0d05ce0d6684ef3ab57054b0eb 3423Author: Kevin E Martin <kem@kem.org> 3424Date: Tue Nov 1 15:08:57 2005 +0000 3425 3426 Update pkgcheck depedencies to work with separate build roots. 3427 3428commit 4f1ef5a0bf2172b9d38c6b1b5dd92ae8efe01f42 3429Author: Kevin E Martin <kem@kem.org> 3430Date: Wed Oct 19 02:48:06 2005 +0000 3431 3432 Update package version number for RC1 release. 3433 3434commit 3abe1c93562dbc4bbebfd293f7e90972e90c9dcc 3435Author: Alan Coopersmith <Alan.Coopersmith@sun.com> 3436Date: Tue Oct 18 00:01:55 2005 +0000 3437 3438 Use @DRIVER_MAN_SUFFIX@ instead of $(DRIVER_MAN_SUFFIX) in macro 3439 substitutions to work better with BSD make 3440 3441commit ba3716950db330db08960248827bbf9321d42d71 3442Author: Adam Jackson <ajax@nwnk.net> 3443Date: Mon Oct 17 22:57:38 2005 +0000 3444 3445 More 1.7 braindamage: define EXTRA_DIST in terms of @DRIVER_NAME@ instead 3446 of indirectly 3447 3448commit 18207a8cc41044538520dd9f0036e44d3fe26f94 3449Author: Alan Coopersmith <Alan.Coopersmith@sun.com> 3450Date: Mon Oct 17 00:09:09 2005 +0000 3451 3452 Use sed & cpp to substitute variables in driver man pages 3453 3454commit bce0feda4d05bd8fd4db20476e117026a21f3906 3455Author: nolan <nolan> 3456Date: Fri Sep 23 02:55:25 2005 +0000 3457 3458 Support for XRandR in the VMware driver. Committed on behalf of Phil 3459 Langdale (plangdale@vmware.com) 3460 3461commit f06924363cd77770257db5aac6d4d3c6add89dfa 3462Author: Daniel Stone <daniel@fooishbar.org> 3463Date: Thu Aug 18 09:03:55 2005 +0000 3464 3465 Update autogen.sh to one that does objdir != srcdir. 3466 3467commit 120d7d1c616d1e2e3c7ca0d1d119d1b0731491c6 3468Author: Kevin E Martin <kem@kem.org> 3469Date: Fri Jul 29 21:22:46 2005 +0000 3470 3471 Various changes preparing packages for RC0: 3472 - Verify and update package version numbers as needed 3473 - Implement versioning scheme 3474 - Change bug address to point to bugzilla bug entry form 3475 - Disable loadable i18n in libX11 by default (use --enable-loadable-i18n to 3476 reenable it) 3477 - Fix makedepend to use pkgconfig and pass distcheck 3478 - Update build script to build macros first 3479 - Update modular Xorg version 3480 3481commit cd14003e4bf878e464437143cf18d30803ace999 3482Author: Søren Sandmann Pedersen <sandmann@daimi.au.dk> 3483Date: Tue Jul 26 23:57:30 2005 +0000 3484 3485 Build system for vmware 3486 3487commit e5ab935718e3f6aea8edc5edef5c0bd78af0ba14 3488Author: Adam Jackson <ajax@nwnk.net> 3489Date: Mon Jul 11 02:30:07 2005 +0000 3490 3491 Prep for modular builds by adding guarded #include "config.h" everywhere. 3492 3493commit daa2be7a9adf977eb4b63bb601d4b8b0b2881903 3494Author: Daniel Stone <daniel@fooishbar.org> 3495Date: Fri Jul 1 22:43:21 2005 +0000 3496 3497 Change all misc.h and os.h references to <X11/foo.h>. 3498 3499commit ae1ba62c3937e6d1067f850d3aeb0b11d316fb86 3500Author: Adam Jackson <ajax@nwnk.net> 3501Date: Sat Jun 25 21:17:00 2005 +0000 3502 3503 Bug #3626: _X_EXPORT tags for video and input drivers. 3504 3505commit 57d09f92c656203958bbc2040f255040f7d051ca 3506Author: nolan <nolan> 3507Date: Fri Feb 18 23:15:59 2005 +0000 3508 3509 updated copyright string in man page of VMware SVGA driver. 3510 3511commit b4379cd6f99c14a2feaabce4560f6dfd62543c62 3512Author: nolan <nolan> 3513Date: Thu Sep 30 21:44:35 2004 +0000 3514 3515 Bugfix for Alpha Texture acceleration from Constantine Sapuntzakis. 3516 3517commit 325df911a83e336d3463ea2220151af4e9f0ccfa 3518Author: nolan <nolan> 3519Date: Sat Aug 14 01:03:55 2004 +0000 3520 3521 Save the register state before we write to any of them. This makes the 3522 VMware driver coexist with VESA fbcon. 3523 3524commit fed82eea7b64b645926c5102563887bc424245b7 3525Author: nolan <nolan> 3526Date: Tue Jun 29 02:20:25 2004 +0000 3527 3528 Send cursor hotspot through the FIFO. This fixes host cursor. Allow any bpp 3529 when 8BIT_EMULATION is set. Save/restore the ID register. 3530 3531commit a3bdeecbb99c721987a22d52c8adf4b1a96e8eec 3532Author: Eric Anholt <anholt@freebsd.org> 3533Date: Wed Jun 16 09:22:38 2004 +0000 3534 3535 DRI XFree86-4_3_99_12-merge import 3536 3537commit 2e4ba05c72961b611c9c4b93038ce54ab54ab9c3 3538Author: Egbert Eich <eich@suse.de> 3539Date: Fri Apr 23 19:53:57 2004 +0000 3540 3541 Merging XORG-CURRENT into trunk 3542 3543commit b01798791090f20fbf4907902d0d35853c05e3a2 3544Author: Egbert Eich <eich@suse.de> 3545Date: Sun Mar 14 08:33:42 2004 +0000 3546 3547 Importing vendor version xf86-4_4_99_1 on Sun Mar 14 00:26:39 PST 2004 3548 3549commit 2ef56b50d6b4fc44359b2bf181ece342fb569153 3550Author: Egbert Eich <eich@suse.de> 3551Date: Wed Mar 3 12:12:28 2004 +0000 3552 3553 Importing vendor version xf86-4_4_0 on Wed Mar 3 04:09:24 PST 2004 3554 3555commit 7218efdc0d95a5d50b3ddfc6a76921e285cf61b6 3556Author: Egbert Eich <eich@suse.de> 3557Date: Thu Feb 26 13:35:56 2004 +0000 3558 3559 readding XFree86's cvs IDs 3560 3561commit 205e213f8b296c47a80e7c8cfb835449b064fd84 3562Author: Egbert Eich <eich@suse.de> 3563Date: Thu Feb 26 09:23:29 2004 +0000 3564 3565 Importing vendor version xf86-4_3_99_903 on Wed Feb 26 01:21:00 PST 2004 3566 3567commit 2f79bc6606f337d0d892e6c73cdf11fe211ead13 3568Author: Kaleb Keithley <kaleb@freedesktop.org> 3569Date: Tue Nov 25 19:28:43 2003 +0000 3570 3571 XFree86 4.3.99.16 Bring the tree up to date for the Cygwin folks 3572 3573commit 118eb1bdba4191972b1ca182e34f3d3ca456daea 3574Author: Kaleb Keithley <kaleb@freedesktop.org> 3575Date: Fri Nov 14 16:48:55 2003 +0000 3576 3577 XFree86 4.3.0.1 3578 3579commit 0b01e22c9cd727cce23c4a9670806f7a839e1937 3580Author: Kaleb Keithley <kaleb@freedesktop.org> 3581Date: Fri Nov 14 16:48:55 2003 +0000 3582 3583 Initial revision 3584