Makefile.in revision 3538fbe3 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18#
19#  Copyright 2005  Red Hat, Inc.
20#
21#  Permission to use, copy, modify, distribute, and sell this software and its
22#  documentation for any purpose is hereby granted without fee, provided that
23#  the above copyright notice appear in all copies and that both that
24#  copyright notice and this permission notice appear in supporting
25#  documentation, and that the name of Red Hat not be used in
26#  advertising or publicity pertaining to distribution of the software without
27#  specific, written prior permission.  Red Hat makes no
28#  representations about the suitability of this software for any purpose.  It
29#  is provided "as is" without express or implied warranty.
30#
31#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
32#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
33#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
34#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
35#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
36#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
37#  PERFORMANCE OF THIS SOFTWARE.
38
39
40VPATH = @srcdir@
41pkgdatadir = $(datadir)/@PACKAGE@
42pkgincludedir = $(includedir)/@PACKAGE@
43pkglibdir = $(libdir)/@PACKAGE@
44pkglibexecdir = $(libexecdir)/@PACKAGE@
45am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
46install_sh_DATA = $(install_sh) -c -m 644
47install_sh_PROGRAM = $(install_sh) -c
48install_sh_SCRIPT = $(install_sh) -c
49INSTALL_HEADER = $(INSTALL_DATA)
50transform = $(program_transform_name)
51NORMAL_INSTALL = :
52PRE_INSTALL = :
53POST_INSTALL = :
54NORMAL_UNINSTALL = :
55PRE_UNINSTALL = :
56POST_UNINSTALL = :
57build_triplet = @build@
58host_triplet = @host@
59bin_PROGRAMS = xfd$(EXEEXT)
60subdir = .
61DIST_COMMON = README $(am__configure_deps) $(dist_appdefault_DATA) \
62	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
63	$(srcdir)/config.h.in $(top_srcdir)/configure COPYING \
64	ChangeLog INSTALL config.guess config.sub depcomp install-sh \
65	missing
66ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
67am__aclocal_m4_deps = $(top_srcdir)/configure.ac
68am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
69	$(ACLOCAL_M4)
70am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
71 configure.lineno config.status.lineno
72mkinstalldirs = $(install_sh) -d
73CONFIG_HEADER = config.h
74CONFIG_CLEAN_FILES =
75CONFIG_CLEAN_VPATH_FILES =
76am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)"
77PROGRAMS = $(bin_PROGRAMS)
78am_xfd_OBJECTS = grid.$(OBJEXT) xfd.$(OBJEXT)
79xfd_OBJECTS = $(am_xfd_OBJECTS)
80am__DEPENDENCIES_1 =
81xfd_DEPENDENCIES = $(am__DEPENDENCIES_1)
82DEFAULT_INCLUDES = -I.@am__isrc@
83depcomp = $(SHELL) $(top_srcdir)/depcomp
84am__depfiles_maybe = depfiles
85am__mv = mv -f
86COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
87	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
88AM_V_CC = $(am__v_CC_$(V))
89am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
90am__v_CC_0 = @echo "  CC    " $@;
91AM_V_at = $(am__v_at_$(V))
92am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
93am__v_at_0 = @
94CCLD = $(CC)
95LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
96AM_V_CCLD = $(am__v_CCLD_$(V))
97am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
98am__v_CCLD_0 = @echo "  CCLD  " $@;
99AM_V_GEN = $(am__v_GEN_$(V))
100am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
101am__v_GEN_0 = @echo "  GEN   " $@;
102SOURCES = $(xfd_SOURCES)
103DIST_SOURCES = $(xfd_SOURCES)
104RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
105	html-recursive info-recursive install-data-recursive \
106	install-dvi-recursive install-exec-recursive \
107	install-html-recursive install-info-recursive \
108	install-pdf-recursive install-ps-recursive install-recursive \
109	installcheck-recursive installdirs-recursive pdf-recursive \
110	ps-recursive uninstall-recursive
111am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
112am__vpath_adj = case $$p in \
113    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
114    *) f=$$p;; \
115  esac;
116am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
117am__install_max = 40
118am__nobase_strip_setup = \
119  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
120am__nobase_strip = \
121  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
122am__nobase_list = $(am__nobase_strip_setup); \
123  for p in $$list; do echo "$$p $$p"; done | \
124  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
125  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
126    if (++n[$$2] == $(am__install_max)) \
127      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
128    END { for (dir in files) print dir, files[dir] }'
129am__base_list = \
130  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
131  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
132DATA = $(dist_appdefault_DATA) $(noinst_DATA)
133RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
134  distclean-recursive maintainer-clean-recursive
135AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
136	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
137	distdir dist dist-all distcheck
138ETAGS = etags
139CTAGS = ctags
140DIST_SUBDIRS = $(SUBDIRS)
141DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
142distdir = $(PACKAGE)-$(VERSION)
143top_distdir = $(distdir)
144am__remove_distdir = \
145  { test ! -d "$(distdir)" \
146    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
147         && rm -fr "$(distdir)"; }; }
148am__relativize = \
149  dir0=`pwd`; \
150  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
151  sed_rest='s,^[^/]*/*,,'; \
152  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
153  sed_butlast='s,/*[^/]*$$,,'; \
154  while test -n "$$dir1"; do \
155    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
156    if test "$$first" != "."; then \
157      if test "$$first" = ".."; then \
158        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
159        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
160      else \
161        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
162        if test "$$first2" = "$$first"; then \
163          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
164        else \
165          dir2="../$$dir2"; \
166        fi; \
167        dir0="$$dir0"/"$$first"; \
168      fi; \
169    fi; \
170    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
171  done; \
172  reldir="$$dir2"
173DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
174GZIP_ENV = --best
175distuninstallcheck_listfiles = find . -type f -print
176distcleancheck_listfiles = find . -type f -print
177ACLOCAL = @ACLOCAL@
178ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
179ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
180AMTAR = @AMTAR@
181AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
182APPDEFS_CFLAGS = @APPDEFS_CFLAGS@
183APPDEFS_LIBS = @APPDEFS_LIBS@
184APP_MAN_DIR = @APP_MAN_DIR@
185APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
186AUTOCONF = @AUTOCONF@
187AUTOHEADER = @AUTOHEADER@
188AUTOMAKE = @AUTOMAKE@
189AWK = @AWK@
190BASE_CFLAGS = @BASE_CFLAGS@
191CC = @CC@
192CCDEPMODE = @CCDEPMODE@
193CFLAGS = @CFLAGS@
194CHANGELOG_CMD = @CHANGELOG_CMD@
195CPP = @CPP@
196CPPFLAGS = @CPPFLAGS@
197CWARNFLAGS = @CWARNFLAGS@
198CYGPATH_W = @CYGPATH_W@
199DEFS = @DEFS@
200DEPDIR = @DEPDIR@
201DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
202DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
203ECHO_C = @ECHO_C@
204ECHO_N = @ECHO_N@
205ECHO_T = @ECHO_T@
206EGREP = @EGREP@
207EXEEXT = @EXEEXT@
208FILE_MAN_DIR = @FILE_MAN_DIR@
209FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
210GREP = @GREP@
211INSTALL = @INSTALL@
212INSTALL_CMD = @INSTALL_CMD@
213INSTALL_DATA = @INSTALL_DATA@
214INSTALL_PROGRAM = @INSTALL_PROGRAM@
215INSTALL_SCRIPT = @INSTALL_SCRIPT@
216INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
217LDFLAGS = @LDFLAGS@
218LIBOBJS = @LIBOBJS@
219LIBS = @LIBS@
220LIB_MAN_DIR = @LIB_MAN_DIR@
221LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
222LOCALEDIR = @LOCALEDIR@
223LTLIBOBJS = @LTLIBOBJS@
224MAINT = @MAINT@
225MAKEINFO = @MAKEINFO@
226MAN_SUBSTS = @MAN_SUBSTS@
227MISC_MAN_DIR = @MISC_MAN_DIR@
228MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
229MKDIR_P = @MKDIR_P@
230OBJEXT = @OBJEXT@
231PACKAGE = @PACKAGE@
232PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
233PACKAGE_NAME = @PACKAGE_NAME@
234PACKAGE_STRING = @PACKAGE_STRING@
235PACKAGE_TARNAME = @PACKAGE_TARNAME@
236PACKAGE_URL = @PACKAGE_URL@
237PACKAGE_VERSION = @PACKAGE_VERSION@
238PATH_SEPARATOR = @PATH_SEPARATOR@
239PKG_CONFIG = @PKG_CONFIG@
240SED = @SED@
241SET_MAKE = @SET_MAKE@
242SHELL = @SHELL@
243STRICT_CFLAGS = @STRICT_CFLAGS@
244STRIP = @STRIP@
245VERSION = @VERSION@
246XFD_CFLAGS = @XFD_CFLAGS@
247XFD_LIBS = @XFD_LIBS@
248XORG_MAN_PAGE = @XORG_MAN_PAGE@
249abs_builddir = @abs_builddir@
250abs_srcdir = @abs_srcdir@
251abs_top_builddir = @abs_top_builddir@
252abs_top_srcdir = @abs_top_srcdir@
253ac_ct_CC = @ac_ct_CC@
254am__include = @am__include@
255am__leading_dot = @am__leading_dot@
256am__quote = @am__quote@
257am__tar = @am__tar@
258am__untar = @am__untar@
259appdefaultdir = @appdefaultdir@
260bindir = @bindir@
261build = @build@
262build_alias = @build_alias@
263build_cpu = @build_cpu@
264build_os = @build_os@
265build_vendor = @build_vendor@
266builddir = @builddir@
267datadir = @datadir@
268datarootdir = @datarootdir@
269docdir = @docdir@
270dvidir = @dvidir@
271exec_prefix = @exec_prefix@
272host = @host@
273host_alias = @host_alias@
274host_cpu = @host_cpu@
275host_os = @host_os@
276host_vendor = @host_vendor@
277htmldir = @htmldir@
278includedir = @includedir@
279infodir = @infodir@
280install_sh = @install_sh@
281libdir = @libdir@
282libexecdir = @libexecdir@
283localedir = @localedir@
284localstatedir = @localstatedir@
285mandir = @mandir@
286mkdir_p = @mkdir_p@
287oldincludedir = @oldincludedir@
288pdfdir = @pdfdir@
289prefix = @prefix@
290program_transform_name = @program_transform_name@
291psdir = @psdir@
292sbindir = @sbindir@
293sharedstatedir = @sharedstatedir@
294srcdir = @srcdir@
295sysconfdir = @sysconfdir@
296target_alias = @target_alias@
297top_build_prefix = @top_build_prefix@
298top_builddir = @top_builddir@
299top_srcdir = @top_srcdir@
300SUBDIRS = man
301AM_CPPFLAGS = -DXRENDER -D_BSD_SOURCE -DLOCALEDIR=\"$(LOCALEDIR)\"
302AM_CFLAGS = $(XFD_CFLAGS) $(CWARNFLAGS)
303xfd_LDADD = $(XFD_LIBS)
304xfd_SOURCES = \
305        grid.c \
306        grid.h \
307        gridP.h \
308        xfd.c
309
310
311# App default files
312DISTCHECK_CONFIGURE_FLAGS = --with-appdefaultdir=\$${datadir}/X11/app-defaults
313dist_appdefault_DATA = \
314        app-defaults/Xfd
315
316MAINTAINERCLEANFILES = ChangeLog INSTALL
317@USE_GETTEXT_TRUE@noinst_DATA = xfd.po
318@USE_GETTEXT_TRUE@CLEANFILES = xfd.po
319all: config.h
320	$(MAKE) $(AM_MAKEFLAGS) all-recursive
321
322.SUFFIXES:
323.SUFFIXES: .c .o .obj
324am--refresh:
325	@:
326$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
327	@for dep in $?; do \
328	  case '$(am__configure_deps)' in \
329	    *$$dep*) \
330	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
331	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
332		&& exit 0; \
333	      exit 1;; \
334	  esac; \
335	done; \
336	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
337	$(am__cd) $(top_srcdir) && \
338	  $(AUTOMAKE) --foreign Makefile
339.PRECIOUS: Makefile
340Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
341	@case '$?' in \
342	  *config.status*) \
343	    echo ' $(SHELL) ./config.status'; \
344	    $(SHELL) ./config.status;; \
345	  *) \
346	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
347	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
348	esac;
349
350$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
351	$(SHELL) ./config.status --recheck
352
353$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
354	$(am__cd) $(srcdir) && $(AUTOCONF)
355$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
356	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
357$(am__aclocal_m4_deps):
358
359config.h: stamp-h1
360	@if test ! -f $@; then \
361	  rm -f stamp-h1; \
362	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
363	else :; fi
364
365stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
366	@rm -f stamp-h1
367	cd $(top_builddir) && $(SHELL) ./config.status config.h
368$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
369	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
370	rm -f stamp-h1
371	touch $@
372
373distclean-hdr:
374	-rm -f config.h stamp-h1
375install-binPROGRAMS: $(bin_PROGRAMS)
376	@$(NORMAL_INSTALL)
377	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
378	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
379	for p in $$list; do echo "$$p $$p"; done | \
380	sed 's/$(EXEEXT)$$//' | \
381	while read p p1; do if test -f $$p; \
382	  then echo "$$p"; echo "$$p"; else :; fi; \
383	done | \
384	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
385	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
386	sed 'N;N;N;s,\n, ,g' | \
387	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
388	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
389	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
390	    else { print "f", $$3 "/" $$4, $$1; } } \
391	  END { for (d in files) print "f", d, files[d] }' | \
392	while read type dir files; do \
393	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
394	    test -z "$$files" || { \
395	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
396	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
397	    } \
398	; done
399
400uninstall-binPROGRAMS:
401	@$(NORMAL_UNINSTALL)
402	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
403	files=`for p in $$list; do echo "$$p"; done | \
404	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
405	      -e 's/$$/$(EXEEXT)/' `; \
406	test -n "$$list" || exit 0; \
407	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
408	cd "$(DESTDIR)$(bindir)" && rm -f $$files
409
410clean-binPROGRAMS:
411	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
412xfd$(EXEEXT): $(xfd_OBJECTS) $(xfd_DEPENDENCIES) 
413	@rm -f xfd$(EXEEXT)
414	$(AM_V_CCLD)$(LINK) $(xfd_OBJECTS) $(xfd_LDADD) $(LIBS)
415
416mostlyclean-compile:
417	-rm -f *.$(OBJEXT)
418
419distclean-compile:
420	-rm -f *.tab.c
421
422@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/grid.Po@am__quote@
423@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfd.Po@am__quote@
424
425.c.o:
426@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
427@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
428@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
429@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
430@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
431@am__fastdepCC_FALSE@	$(COMPILE) -c $<
432
433.c.obj:
434@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
435@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
436@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
437@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
438@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
439@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
440install-dist_appdefaultDATA: $(dist_appdefault_DATA)
441	@$(NORMAL_INSTALL)
442	test -z "$(appdefaultdir)" || $(MKDIR_P) "$(DESTDIR)$(appdefaultdir)"
443	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
444	for p in $$list; do \
445	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
446	  echo "$$d$$p"; \
447	done | $(am__base_list) | \
448	while read files; do \
449	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appdefaultdir)'"; \
450	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appdefaultdir)" || exit $$?; \
451	done
452
453uninstall-dist_appdefaultDATA:
454	@$(NORMAL_UNINSTALL)
455	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
456	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
457	test -n "$$files" || exit 0; \
458	echo " ( cd '$(DESTDIR)$(appdefaultdir)' && rm -f" $$files ")"; \
459	cd "$(DESTDIR)$(appdefaultdir)" && rm -f $$files
460
461# This directory's subdirectories are mostly independent; you can cd
462# into them and run `make' without going through this Makefile.
463# To change the values of `make' variables: instead of editing Makefiles,
464# (1) if the variable is set in `config.status', edit `config.status'
465#     (which will cause the Makefiles to be regenerated when you run `make');
466# (2) otherwise, pass the desired values on the `make' command line.
467$(RECURSIVE_TARGETS):
468	@fail= failcom='exit 1'; \
469	for f in x $$MAKEFLAGS; do \
470	  case $$f in \
471	    *=* | --[!k]*);; \
472	    *k*) failcom='fail=yes';; \
473	  esac; \
474	done; \
475	dot_seen=no; \
476	target=`echo $@ | sed s/-recursive//`; \
477	list='$(SUBDIRS)'; for subdir in $$list; do \
478	  echo "Making $$target in $$subdir"; \
479	  if test "$$subdir" = "."; then \
480	    dot_seen=yes; \
481	    local_target="$$target-am"; \
482	  else \
483	    local_target="$$target"; \
484	  fi; \
485	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
486	  || eval $$failcom; \
487	done; \
488	if test "$$dot_seen" = "no"; then \
489	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
490	fi; test -z "$$fail"
491
492$(RECURSIVE_CLEAN_TARGETS):
493	@fail= failcom='exit 1'; \
494	for f in x $$MAKEFLAGS; do \
495	  case $$f in \
496	    *=* | --[!k]*);; \
497	    *k*) failcom='fail=yes';; \
498	  esac; \
499	done; \
500	dot_seen=no; \
501	case "$@" in \
502	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
503	  *) list='$(SUBDIRS)' ;; \
504	esac; \
505	rev=''; for subdir in $$list; do \
506	  if test "$$subdir" = "."; then :; else \
507	    rev="$$subdir $$rev"; \
508	  fi; \
509	done; \
510	rev="$$rev ."; \
511	target=`echo $@ | sed s/-recursive//`; \
512	for subdir in $$rev; do \
513	  echo "Making $$target in $$subdir"; \
514	  if test "$$subdir" = "."; then \
515	    local_target="$$target-am"; \
516	  else \
517	    local_target="$$target"; \
518	  fi; \
519	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
520	  || eval $$failcom; \
521	done && test -z "$$fail"
522tags-recursive:
523	list='$(SUBDIRS)'; for subdir in $$list; do \
524	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
525	done
526ctags-recursive:
527	list='$(SUBDIRS)'; for subdir in $$list; do \
528	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
529	done
530
531ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
532	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
533	unique=`for i in $$list; do \
534	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
535	  done | \
536	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
537	      END { if (nonempty) { for (i in files) print i; }; }'`; \
538	mkid -fID $$unique
539tags: TAGS
540
541TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
542		$(TAGS_FILES) $(LISP)
543	set x; \
544	here=`pwd`; \
545	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
546	  include_option=--etags-include; \
547	  empty_fix=.; \
548	else \
549	  include_option=--include; \
550	  empty_fix=; \
551	fi; \
552	list='$(SUBDIRS)'; for subdir in $$list; do \
553	  if test "$$subdir" = .; then :; else \
554	    test ! -f $$subdir/TAGS || \
555	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
556	  fi; \
557	done; \
558	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
559	unique=`for i in $$list; do \
560	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
561	  done | \
562	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
563	      END { if (nonempty) { for (i in files) print i; }; }'`; \
564	shift; \
565	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
566	  test -n "$$unique" || unique=$$empty_fix; \
567	  if test $$# -gt 0; then \
568	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
569	      "$$@" $$unique; \
570	  else \
571	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
572	      $$unique; \
573	  fi; \
574	fi
575ctags: CTAGS
576CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
577		$(TAGS_FILES) $(LISP)
578	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
579	unique=`for i in $$list; do \
580	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
581	  done | \
582	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
583	      END { if (nonempty) { for (i in files) print i; }; }'`; \
584	test -z "$(CTAGS_ARGS)$$unique" \
585	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
586	     $$unique
587
588GTAGS:
589	here=`$(am__cd) $(top_builddir) && pwd` \
590	  && $(am__cd) $(top_srcdir) \
591	  && gtags -i $(GTAGS_ARGS) "$$here"
592
593distclean-tags:
594	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
595
596distdir: $(DISTFILES)
597	$(am__remove_distdir)
598	test -d "$(distdir)" || mkdir "$(distdir)"
599	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
600	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
601	list='$(DISTFILES)'; \
602	  dist_files=`for file in $$list; do echo $$file; done | \
603	  sed -e "s|^$$srcdirstrip/||;t" \
604	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
605	case $$dist_files in \
606	  */*) $(MKDIR_P) `echo "$$dist_files" | \
607			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
608			   sort -u` ;; \
609	esac; \
610	for file in $$dist_files; do \
611	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
612	  if test -d $$d/$$file; then \
613	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
614	    if test -d "$(distdir)/$$file"; then \
615	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
616	    fi; \
617	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
618	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
619	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
620	    fi; \
621	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
622	  else \
623	    test -f "$(distdir)/$$file" \
624	    || cp -p $$d/$$file "$(distdir)/$$file" \
625	    || exit 1; \
626	  fi; \
627	done
628	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
629	  if test "$$subdir" = .; then :; else \
630	    test -d "$(distdir)/$$subdir" \
631	    || $(MKDIR_P) "$(distdir)/$$subdir" \
632	    || exit 1; \
633	  fi; \
634	done
635	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
636	  if test "$$subdir" = .; then :; else \
637	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
638	    $(am__relativize); \
639	    new_distdir=$$reldir; \
640	    dir1=$$subdir; dir2="$(top_distdir)"; \
641	    $(am__relativize); \
642	    new_top_distdir=$$reldir; \
643	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
644	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
645	    ($(am__cd) $$subdir && \
646	      $(MAKE) $(AM_MAKEFLAGS) \
647	        top_distdir="$$new_top_distdir" \
648	        distdir="$$new_distdir" \
649		am__remove_distdir=: \
650		am__skip_length_check=: \
651		am__skip_mode_fix=: \
652	        distdir) \
653	      || exit 1; \
654	  fi; \
655	done
656	$(MAKE) $(AM_MAKEFLAGS) \
657	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
658	  dist-hook
659	-test -n "$(am__skip_mode_fix)" \
660	|| find "$(distdir)" -type d ! -perm -755 \
661		-exec chmod u+rwx,go+rx {} \; -o \
662	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
663	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
664	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
665	|| chmod -R a+r "$(distdir)"
666dist-gzip: distdir
667	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
668	$(am__remove_distdir)
669dist-bzip2: distdir
670	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
671	$(am__remove_distdir)
672
673dist-lzma: distdir
674	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
675	$(am__remove_distdir)
676
677dist-xz: distdir
678	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
679	$(am__remove_distdir)
680
681dist-tarZ: distdir
682	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
683	$(am__remove_distdir)
684
685dist-shar: distdir
686	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
687	$(am__remove_distdir)
688
689dist-zip: distdir
690	-rm -f $(distdir).zip
691	zip -rq $(distdir).zip $(distdir)
692	$(am__remove_distdir)
693
694dist dist-all: distdir
695	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
696	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
697	$(am__remove_distdir)
698
699# This target untars the dist file and tries a VPATH configuration.  Then
700# it guarantees that the distribution is self-contained by making another
701# tarfile.
702distcheck: dist
703	case '$(DIST_ARCHIVES)' in \
704	*.tar.gz*) \
705	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
706	*.tar.bz2*) \
707	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
708	*.tar.lzma*) \
709	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
710	*.tar.xz*) \
711	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
712	*.tar.Z*) \
713	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
714	*.shar.gz*) \
715	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
716	*.zip*) \
717	  unzip $(distdir).zip ;;\
718	esac
719	chmod -R a-w $(distdir); chmod a+w $(distdir)
720	mkdir $(distdir)/_build
721	mkdir $(distdir)/_inst
722	chmod a-w $(distdir)
723	test -d $(distdir)/_build || exit 0; \
724	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
725	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
726	  && am__cwd=`pwd` \
727	  && $(am__cd) $(distdir)/_build \
728	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
729	    $(DISTCHECK_CONFIGURE_FLAGS) \
730	  && $(MAKE) $(AM_MAKEFLAGS) \
731	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
732	  && $(MAKE) $(AM_MAKEFLAGS) check \
733	  && $(MAKE) $(AM_MAKEFLAGS) install \
734	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
735	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
736	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
737	        distuninstallcheck \
738	  && chmod -R a-w "$$dc_install_base" \
739	  && ({ \
740	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
741	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
742	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
743	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
744	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
745	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
746	  && rm -rf "$$dc_destdir" \
747	  && $(MAKE) $(AM_MAKEFLAGS) dist \
748	  && rm -rf $(DIST_ARCHIVES) \
749	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
750	  && cd "$$am__cwd" \
751	  || exit 1
752	$(am__remove_distdir)
753	@(echo "$(distdir) archives ready for distribution: "; \
754	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
755	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
756distuninstallcheck:
757	@$(am__cd) '$(distuninstallcheck_dir)' \
758	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
759	   || { echo "ERROR: files left after uninstall:" ; \
760	        if test -n "$(DESTDIR)"; then \
761	          echo "  (check DESTDIR support)"; \
762	        fi ; \
763	        $(distuninstallcheck_listfiles) ; \
764	        exit 1; } >&2
765distcleancheck: distclean
766	@if test '$(srcdir)' = . ; then \
767	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
768	  exit 1 ; \
769	fi
770	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
771	  || { echo "ERROR: files left in build directory after distclean:" ; \
772	       $(distcleancheck_listfiles) ; \
773	       exit 1; } >&2
774check-am: all-am
775check: check-recursive
776all-am: Makefile $(PROGRAMS) $(DATA) config.h
777installdirs: installdirs-recursive
778installdirs-am:
779	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)"; do \
780	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
781	done
782install: install-recursive
783install-exec: install-exec-recursive
784install-data: install-data-recursive
785uninstall: uninstall-recursive
786
787install-am: all-am
788	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
789
790installcheck: installcheck-recursive
791install-strip:
792	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
793	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
794	  `test -z '$(STRIP)' || \
795	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
796mostlyclean-generic:
797
798clean-generic:
799	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
800
801distclean-generic:
802	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
803	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
804
805maintainer-clean-generic:
806	@echo "This command is intended for maintainers to use"
807	@echo "it deletes files that may require special tools to rebuild."
808	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
809clean: clean-recursive
810
811clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
812
813distclean: distclean-recursive
814	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
815	-rm -rf ./$(DEPDIR)
816	-rm -f Makefile
817distclean-am: clean-am distclean-compile distclean-generic \
818	distclean-hdr distclean-tags
819
820dvi: dvi-recursive
821
822dvi-am:
823
824html: html-recursive
825
826html-am:
827
828info: info-recursive
829
830info-am:
831
832install-data-am: install-dist_appdefaultDATA
833
834install-dvi: install-dvi-recursive
835
836install-dvi-am:
837
838install-exec-am: install-binPROGRAMS
839
840install-html: install-html-recursive
841
842install-html-am:
843
844install-info: install-info-recursive
845
846install-info-am:
847
848install-man:
849
850install-pdf: install-pdf-recursive
851
852install-pdf-am:
853
854install-ps: install-ps-recursive
855
856install-ps-am:
857
858installcheck-am:
859
860maintainer-clean: maintainer-clean-recursive
861	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
862	-rm -rf $(top_srcdir)/autom4te.cache
863	-rm -rf ./$(DEPDIR)
864	-rm -f Makefile
865maintainer-clean-am: distclean-am maintainer-clean-generic
866
867mostlyclean: mostlyclean-recursive
868
869mostlyclean-am: mostlyclean-compile mostlyclean-generic
870
871pdf: pdf-recursive
872
873pdf-am:
874
875ps: ps-recursive
876
877ps-am:
878
879uninstall-am: uninstall-binPROGRAMS uninstall-dist_appdefaultDATA
880
881.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
882	ctags-recursive install-am install-strip tags-recursive
883
884.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
885	all all-am am--refresh check check-am clean clean-binPROGRAMS \
886	clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \
887	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
888	dist-zip distcheck distclean distclean-compile \
889	distclean-generic distclean-hdr distclean-tags distcleancheck \
890	distdir distuninstallcheck dvi dvi-am html html-am info \
891	info-am install install-am install-binPROGRAMS install-data \
892	install-data-am install-dist_appdefaultDATA install-dvi \
893	install-dvi-am install-exec install-exec-am install-html \
894	install-html-am install-info install-info-am install-man \
895	install-pdf install-pdf-am install-ps install-ps-am \
896	install-strip installcheck installcheck-am installdirs \
897	installdirs-am maintainer-clean maintainer-clean-generic \
898	mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
899	ps ps-am tags tags-recursive uninstall uninstall-am \
900	uninstall-binPROGRAMS uninstall-dist_appdefaultDATA
901
902
903.PHONY: ChangeLog INSTALL
904
905INSTALL:
906	$(INSTALL_CMD)
907
908ChangeLog:
909	$(CHANGELOG_CMD)
910
911dist-hook: ChangeLog INSTALL
912
913@USE_GETTEXT_TRUE@xfd.po: $(xfd_SOURCES:%=$(srcdir)/%)
914@USE_GETTEXT_TRUE@	$(AM_V_GEN)xgettext -d xfd -n $(xfd_SOURCES:%=$(srcdir)/%)
915
916# Tell versions [3.59,3.63) of GNU make to not export all variables.
917# Otherwise a system limit (for SysV at least) may be exceeded.
918.NOEXPORT:
919