Makefile.in revision eea2e341 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18# 
19#  Copyright 2005  Red Hat, Inc.
20# 
21#  Permission to use, copy, modify, distribute, and sell this software and its
22#  documentation for any purpose is hereby granted without fee, provided that
23#  the above copyright notice appear in all copies and that both that
24#  copyright notice and this permission notice appear in supporting
25#  documentation, and that the name of Red Hat not be used in
26#  advertising or publicity pertaining to distribution of the software without
27#  specific, written prior permission.  Red Hat makes no
28#  representations about the suitability of this software for any purpose.  It
29#  is provided "as is" without express or implied warranty.
30# 
31#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
32#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
33#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
34#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
35#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
36#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
37#  PERFORMANCE OF THIS SOFTWARE.
38
39VPATH = @srcdir@
40pkgdatadir = $(datadir)/@PACKAGE@
41pkgincludedir = $(includedir)/@PACKAGE@
42pkglibdir = $(libdir)/@PACKAGE@
43pkglibexecdir = $(libexecdir)/@PACKAGE@
44am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
45install_sh_DATA = $(install_sh) -c -m 644
46install_sh_PROGRAM = $(install_sh) -c
47install_sh_SCRIPT = $(install_sh) -c
48INSTALL_HEADER = $(INSTALL_DATA)
49transform = $(program_transform_name)
50NORMAL_INSTALL = :
51PRE_INSTALL = :
52POST_INSTALL = :
53NORMAL_UNINSTALL = :
54PRE_UNINSTALL = :
55POST_UNINSTALL = :
56build_triplet = @build@
57host_triplet = @host@
58bin_PROGRAMS = xgamma$(EXEEXT)
59subdir = .
60DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
61	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
62	$(top_srcdir)/configure COPYING ChangeLog INSTALL config.guess \
63	config.sub depcomp install-sh missing
64ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
65am__aclocal_m4_deps = $(top_srcdir)/configure.ac
66am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
67	$(ACLOCAL_M4)
68am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
69 configure.lineno config.status.lineno
70mkinstalldirs = $(install_sh) -d
71CONFIG_HEADER = config.h
72CONFIG_CLEAN_FILES =
73CONFIG_CLEAN_VPATH_FILES =
74am__installdirs = "$(DESTDIR)$(bindir)"
75PROGRAMS = $(bin_PROGRAMS)
76am_xgamma_OBJECTS = xgamma.$(OBJEXT)
77xgamma_OBJECTS = $(am_xgamma_OBJECTS)
78am__DEPENDENCIES_1 =
79xgamma_DEPENDENCIES = $(am__DEPENDENCIES_1)
80DEFAULT_INCLUDES = -I.@am__isrc@
81depcomp = $(SHELL) $(top_srcdir)/depcomp
82am__depfiles_maybe = depfiles
83am__mv = mv -f
84COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
85	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
86AM_V_CC = $(am__v_CC_$(V))
87am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
88am__v_CC_0 = @echo "  CC    " $@;
89AM_V_at = $(am__v_at_$(V))
90am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
91am__v_at_0 = @
92CCLD = $(CC)
93LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
94AM_V_CCLD = $(am__v_CCLD_$(V))
95am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
96am__v_CCLD_0 = @echo "  CCLD  " $@;
97AM_V_GEN = $(am__v_GEN_$(V))
98am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
99am__v_GEN_0 = @echo "  GEN   " $@;
100SOURCES = $(xgamma_SOURCES)
101DIST_SOURCES = $(xgamma_SOURCES)
102RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
103	html-recursive info-recursive install-data-recursive \
104	install-dvi-recursive install-exec-recursive \
105	install-html-recursive install-info-recursive \
106	install-pdf-recursive install-ps-recursive install-recursive \
107	installcheck-recursive installdirs-recursive pdf-recursive \
108	ps-recursive uninstall-recursive
109RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
110  distclean-recursive maintainer-clean-recursive
111AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
112	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
113	distdir dist dist-all distcheck
114ETAGS = etags
115CTAGS = ctags
116DIST_SUBDIRS = $(SUBDIRS)
117DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
118distdir = $(PACKAGE)-$(VERSION)
119top_distdir = $(distdir)
120am__remove_distdir = \
121  { test ! -d "$(distdir)" \
122    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
123         && rm -fr "$(distdir)"; }; }
124am__relativize = \
125  dir0=`pwd`; \
126  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
127  sed_rest='s,^[^/]*/*,,'; \
128  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
129  sed_butlast='s,/*[^/]*$$,,'; \
130  while test -n "$$dir1"; do \
131    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
132    if test "$$first" != "."; then \
133      if test "$$first" = ".."; then \
134        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
135        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
136      else \
137        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
138        if test "$$first2" = "$$first"; then \
139          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
140        else \
141          dir2="../$$dir2"; \
142        fi; \
143        dir0="$$dir0"/"$$first"; \
144      fi; \
145    fi; \
146    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
147  done; \
148  reldir="$$dir2"
149DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
150GZIP_ENV = --best
151distuninstallcheck_listfiles = find . -type f -print
152distcleancheck_listfiles = find . -type f -print
153ACLOCAL = @ACLOCAL@
154ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
155ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
156AMTAR = @AMTAR@
157AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
158APP_MAN_DIR = @APP_MAN_DIR@
159APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
160AUTOCONF = @AUTOCONF@
161AUTOHEADER = @AUTOHEADER@
162AUTOMAKE = @AUTOMAKE@
163AWK = @AWK@
164BASE_CFLAGS = @BASE_CFLAGS@
165CC = @CC@
166CCDEPMODE = @CCDEPMODE@
167CFLAGS = @CFLAGS@
168CHANGELOG_CMD = @CHANGELOG_CMD@
169CPP = @CPP@
170CPPFLAGS = @CPPFLAGS@
171CWARNFLAGS = @CWARNFLAGS@
172CYGPATH_W = @CYGPATH_W@
173DEFS = @DEFS@
174DEPDIR = @DEPDIR@
175DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
176DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
177ECHO_C = @ECHO_C@
178ECHO_N = @ECHO_N@
179ECHO_T = @ECHO_T@
180EGREP = @EGREP@
181EXEEXT = @EXEEXT@
182FILE_MAN_DIR = @FILE_MAN_DIR@
183FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
184GREP = @GREP@
185INSTALL = @INSTALL@
186INSTALL_CMD = @INSTALL_CMD@
187INSTALL_DATA = @INSTALL_DATA@
188INSTALL_PROGRAM = @INSTALL_PROGRAM@
189INSTALL_SCRIPT = @INSTALL_SCRIPT@
190INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
191LDFLAGS = @LDFLAGS@
192LIBOBJS = @LIBOBJS@
193LIBS = @LIBS@
194LIB_MAN_DIR = @LIB_MAN_DIR@
195LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
196LTLIBOBJS = @LTLIBOBJS@
197MAINT = @MAINT@
198MAKEINFO = @MAKEINFO@
199MAN_SUBSTS = @MAN_SUBSTS@
200MISC_MAN_DIR = @MISC_MAN_DIR@
201MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
202MKDIR_P = @MKDIR_P@
203OBJEXT = @OBJEXT@
204PACKAGE = @PACKAGE@
205PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
206PACKAGE_NAME = @PACKAGE_NAME@
207PACKAGE_STRING = @PACKAGE_STRING@
208PACKAGE_TARNAME = @PACKAGE_TARNAME@
209PACKAGE_URL = @PACKAGE_URL@
210PACKAGE_VERSION = @PACKAGE_VERSION@
211PATH_SEPARATOR = @PATH_SEPARATOR@
212PKG_CONFIG = @PKG_CONFIG@
213SED = @SED@
214SET_MAKE = @SET_MAKE@
215SHELL = @SHELL@
216STRICT_CFLAGS = @STRICT_CFLAGS@
217STRIP = @STRIP@
218VERSION = @VERSION@
219XGAMMA_CFLAGS = @XGAMMA_CFLAGS@
220XGAMMA_LIBS = @XGAMMA_LIBS@
221XORG_MAN_PAGE = @XORG_MAN_PAGE@
222abs_builddir = @abs_builddir@
223abs_srcdir = @abs_srcdir@
224abs_top_builddir = @abs_top_builddir@
225abs_top_srcdir = @abs_top_srcdir@
226ac_ct_CC = @ac_ct_CC@
227am__include = @am__include@
228am__leading_dot = @am__leading_dot@
229am__quote = @am__quote@
230am__tar = @am__tar@
231am__untar = @am__untar@
232bindir = @bindir@
233build = @build@
234build_alias = @build_alias@
235build_cpu = @build_cpu@
236build_os = @build_os@
237build_vendor = @build_vendor@
238builddir = @builddir@
239datadir = @datadir@
240datarootdir = @datarootdir@
241docdir = @docdir@
242dvidir = @dvidir@
243exec_prefix = @exec_prefix@
244host = @host@
245host_alias = @host_alias@
246host_cpu = @host_cpu@
247host_os = @host_os@
248host_vendor = @host_vendor@
249htmldir = @htmldir@
250includedir = @includedir@
251infodir = @infodir@
252install_sh = @install_sh@
253libdir = @libdir@
254libexecdir = @libexecdir@
255localedir = @localedir@
256localstatedir = @localstatedir@
257mandir = @mandir@
258mkdir_p = @mkdir_p@
259oldincludedir = @oldincludedir@
260pdfdir = @pdfdir@
261prefix = @prefix@
262program_transform_name = @program_transform_name@
263psdir = @psdir@
264sbindir = @sbindir@
265sharedstatedir = @sharedstatedir@
266srcdir = @srcdir@
267sysconfdir = @sysconfdir@
268target_alias = @target_alias@
269top_build_prefix = @top_build_prefix@
270top_builddir = @top_builddir@
271top_srcdir = @top_srcdir@
272SUBDIRS = man
273AM_CFLAGS = $(CWARNFLAGS) $(XGAMMA_CFLAGS)
274xgamma_LDADD = $(XGAMMA_LIBS)
275xgamma_SOURCES = \
276        xgamma.c
277
278MAINTAINERCLEANFILES = ChangeLog INSTALL
279all: config.h
280	$(MAKE) $(AM_MAKEFLAGS) all-recursive
281
282.SUFFIXES:
283.SUFFIXES: .c .o .obj
284am--refresh:
285	@:
286$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
287	@for dep in $?; do \
288	  case '$(am__configure_deps)' in \
289	    *$$dep*) \
290	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
291	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
292		&& exit 0; \
293	      exit 1;; \
294	  esac; \
295	done; \
296	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
297	$(am__cd) $(top_srcdir) && \
298	  $(AUTOMAKE) --foreign Makefile
299.PRECIOUS: Makefile
300Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
301	@case '$?' in \
302	  *config.status*) \
303	    echo ' $(SHELL) ./config.status'; \
304	    $(SHELL) ./config.status;; \
305	  *) \
306	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
307	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
308	esac;
309
310$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
311	$(SHELL) ./config.status --recheck
312
313$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
314	$(am__cd) $(srcdir) && $(AUTOCONF)
315$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
316	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
317$(am__aclocal_m4_deps):
318
319config.h: stamp-h1
320	@if test ! -f $@; then \
321	  rm -f stamp-h1; \
322	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
323	else :; fi
324
325stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
326	@rm -f stamp-h1
327	cd $(top_builddir) && $(SHELL) ./config.status config.h
328$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
329	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
330	rm -f stamp-h1
331	touch $@
332
333distclean-hdr:
334	-rm -f config.h stamp-h1
335install-binPROGRAMS: $(bin_PROGRAMS)
336	@$(NORMAL_INSTALL)
337	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
338	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
339	for p in $$list; do echo "$$p $$p"; done | \
340	sed 's/$(EXEEXT)$$//' | \
341	while read p p1; do if test -f $$p; \
342	  then echo "$$p"; echo "$$p"; else :; fi; \
343	done | \
344	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
345	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
346	sed 'N;N;N;s,\n, ,g' | \
347	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
348	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
349	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
350	    else { print "f", $$3 "/" $$4, $$1; } } \
351	  END { for (d in files) print "f", d, files[d] }' | \
352	while read type dir files; do \
353	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
354	    test -z "$$files" || { \
355	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
356	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
357	    } \
358	; done
359
360uninstall-binPROGRAMS:
361	@$(NORMAL_UNINSTALL)
362	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
363	files=`for p in $$list; do echo "$$p"; done | \
364	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
365	      -e 's/$$/$(EXEEXT)/' `; \
366	test -n "$$list" || exit 0; \
367	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
368	cd "$(DESTDIR)$(bindir)" && rm -f $$files
369
370clean-binPROGRAMS:
371	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
372xgamma$(EXEEXT): $(xgamma_OBJECTS) $(xgamma_DEPENDENCIES) 
373	@rm -f xgamma$(EXEEXT)
374	$(AM_V_CCLD)$(LINK) $(xgamma_OBJECTS) $(xgamma_LDADD) $(LIBS)
375
376mostlyclean-compile:
377	-rm -f *.$(OBJEXT)
378
379distclean-compile:
380	-rm -f *.tab.c
381
382@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xgamma.Po@am__quote@
383
384.c.o:
385@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
386@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
387@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
388@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
389@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
390@am__fastdepCC_FALSE@	$(COMPILE) -c $<
391
392.c.obj:
393@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
394@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
395@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
396@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
397@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
398@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
399
400# This directory's subdirectories are mostly independent; you can cd
401# into them and run `make' without going through this Makefile.
402# To change the values of `make' variables: instead of editing Makefiles,
403# (1) if the variable is set in `config.status', edit `config.status'
404#     (which will cause the Makefiles to be regenerated when you run `make');
405# (2) otherwise, pass the desired values on the `make' command line.
406$(RECURSIVE_TARGETS):
407	@fail= failcom='exit 1'; \
408	for f in x $$MAKEFLAGS; do \
409	  case $$f in \
410	    *=* | --[!k]*);; \
411	    *k*) failcom='fail=yes';; \
412	  esac; \
413	done; \
414	dot_seen=no; \
415	target=`echo $@ | sed s/-recursive//`; \
416	list='$(SUBDIRS)'; for subdir in $$list; do \
417	  echo "Making $$target in $$subdir"; \
418	  if test "$$subdir" = "."; then \
419	    dot_seen=yes; \
420	    local_target="$$target-am"; \
421	  else \
422	    local_target="$$target"; \
423	  fi; \
424	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
425	  || eval $$failcom; \
426	done; \
427	if test "$$dot_seen" = "no"; then \
428	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
429	fi; test -z "$$fail"
430
431$(RECURSIVE_CLEAN_TARGETS):
432	@fail= failcom='exit 1'; \
433	for f in x $$MAKEFLAGS; do \
434	  case $$f in \
435	    *=* | --[!k]*);; \
436	    *k*) failcom='fail=yes';; \
437	  esac; \
438	done; \
439	dot_seen=no; \
440	case "$@" in \
441	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
442	  *) list='$(SUBDIRS)' ;; \
443	esac; \
444	rev=''; for subdir in $$list; do \
445	  if test "$$subdir" = "."; then :; else \
446	    rev="$$subdir $$rev"; \
447	  fi; \
448	done; \
449	rev="$$rev ."; \
450	target=`echo $@ | sed s/-recursive//`; \
451	for subdir in $$rev; do \
452	  echo "Making $$target in $$subdir"; \
453	  if test "$$subdir" = "."; then \
454	    local_target="$$target-am"; \
455	  else \
456	    local_target="$$target"; \
457	  fi; \
458	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
459	  || eval $$failcom; \
460	done && test -z "$$fail"
461tags-recursive:
462	list='$(SUBDIRS)'; for subdir in $$list; do \
463	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
464	done
465ctags-recursive:
466	list='$(SUBDIRS)'; for subdir in $$list; do \
467	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
468	done
469
470ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
471	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
472	unique=`for i in $$list; do \
473	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
474	  done | \
475	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
476	      END { if (nonempty) { for (i in files) print i; }; }'`; \
477	mkid -fID $$unique
478tags: TAGS
479
480TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
481		$(TAGS_FILES) $(LISP)
482	set x; \
483	here=`pwd`; \
484	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
485	  include_option=--etags-include; \
486	  empty_fix=.; \
487	else \
488	  include_option=--include; \
489	  empty_fix=; \
490	fi; \
491	list='$(SUBDIRS)'; for subdir in $$list; do \
492	  if test "$$subdir" = .; then :; else \
493	    test ! -f $$subdir/TAGS || \
494	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
495	  fi; \
496	done; \
497	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
498	unique=`for i in $$list; do \
499	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
500	  done | \
501	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
502	      END { if (nonempty) { for (i in files) print i; }; }'`; \
503	shift; \
504	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
505	  test -n "$$unique" || unique=$$empty_fix; \
506	  if test $$# -gt 0; then \
507	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
508	      "$$@" $$unique; \
509	  else \
510	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
511	      $$unique; \
512	  fi; \
513	fi
514ctags: CTAGS
515CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
516		$(TAGS_FILES) $(LISP)
517	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
518	unique=`for i in $$list; do \
519	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
520	  done | \
521	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
522	      END { if (nonempty) { for (i in files) print i; }; }'`; \
523	test -z "$(CTAGS_ARGS)$$unique" \
524	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
525	     $$unique
526
527GTAGS:
528	here=`$(am__cd) $(top_builddir) && pwd` \
529	  && $(am__cd) $(top_srcdir) \
530	  && gtags -i $(GTAGS_ARGS) "$$here"
531
532distclean-tags:
533	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
534
535distdir: $(DISTFILES)
536	$(am__remove_distdir)
537	test -d "$(distdir)" || mkdir "$(distdir)"
538	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
539	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
540	list='$(DISTFILES)'; \
541	  dist_files=`for file in $$list; do echo $$file; done | \
542	  sed -e "s|^$$srcdirstrip/||;t" \
543	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
544	case $$dist_files in \
545	  */*) $(MKDIR_P) `echo "$$dist_files" | \
546			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
547			   sort -u` ;; \
548	esac; \
549	for file in $$dist_files; do \
550	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
551	  if test -d $$d/$$file; then \
552	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
553	    if test -d "$(distdir)/$$file"; then \
554	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
555	    fi; \
556	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
557	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
558	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
559	    fi; \
560	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
561	  else \
562	    test -f "$(distdir)/$$file" \
563	    || cp -p $$d/$$file "$(distdir)/$$file" \
564	    || exit 1; \
565	  fi; \
566	done
567	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
568	  if test "$$subdir" = .; then :; else \
569	    test -d "$(distdir)/$$subdir" \
570	    || $(MKDIR_P) "$(distdir)/$$subdir" \
571	    || exit 1; \
572	  fi; \
573	done
574	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
575	  if test "$$subdir" = .; then :; else \
576	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
577	    $(am__relativize); \
578	    new_distdir=$$reldir; \
579	    dir1=$$subdir; dir2="$(top_distdir)"; \
580	    $(am__relativize); \
581	    new_top_distdir=$$reldir; \
582	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
583	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
584	    ($(am__cd) $$subdir && \
585	      $(MAKE) $(AM_MAKEFLAGS) \
586	        top_distdir="$$new_top_distdir" \
587	        distdir="$$new_distdir" \
588		am__remove_distdir=: \
589		am__skip_length_check=: \
590		am__skip_mode_fix=: \
591	        distdir) \
592	      || exit 1; \
593	  fi; \
594	done
595	$(MAKE) $(AM_MAKEFLAGS) \
596	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
597	  dist-hook
598	-test -n "$(am__skip_mode_fix)" \
599	|| find "$(distdir)" -type d ! -perm -755 \
600		-exec chmod u+rwx,go+rx {} \; -o \
601	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
602	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
603	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
604	|| chmod -R a+r "$(distdir)"
605dist-gzip: distdir
606	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
607	$(am__remove_distdir)
608dist-bzip2: distdir
609	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
610	$(am__remove_distdir)
611
612dist-lzma: distdir
613	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
614	$(am__remove_distdir)
615
616dist-xz: distdir
617	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
618	$(am__remove_distdir)
619
620dist-tarZ: distdir
621	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
622	$(am__remove_distdir)
623
624dist-shar: distdir
625	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
626	$(am__remove_distdir)
627
628dist-zip: distdir
629	-rm -f $(distdir).zip
630	zip -rq $(distdir).zip $(distdir)
631	$(am__remove_distdir)
632
633dist dist-all: distdir
634	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
635	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
636	$(am__remove_distdir)
637
638# This target untars the dist file and tries a VPATH configuration.  Then
639# it guarantees that the distribution is self-contained by making another
640# tarfile.
641distcheck: dist
642	case '$(DIST_ARCHIVES)' in \
643	*.tar.gz*) \
644	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
645	*.tar.bz2*) \
646	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
647	*.tar.lzma*) \
648	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
649	*.tar.xz*) \
650	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
651	*.tar.Z*) \
652	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
653	*.shar.gz*) \
654	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
655	*.zip*) \
656	  unzip $(distdir).zip ;;\
657	esac
658	chmod -R a-w $(distdir); chmod a+w $(distdir)
659	mkdir $(distdir)/_build
660	mkdir $(distdir)/_inst
661	chmod a-w $(distdir)
662	test -d $(distdir)/_build || exit 0; \
663	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
664	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
665	  && am__cwd=`pwd` \
666	  && $(am__cd) $(distdir)/_build \
667	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
668	    $(DISTCHECK_CONFIGURE_FLAGS) \
669	  && $(MAKE) $(AM_MAKEFLAGS) \
670	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
671	  && $(MAKE) $(AM_MAKEFLAGS) check \
672	  && $(MAKE) $(AM_MAKEFLAGS) install \
673	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
674	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
675	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
676	        distuninstallcheck \
677	  && chmod -R a-w "$$dc_install_base" \
678	  && ({ \
679	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
680	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
681	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
682	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
683	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
684	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
685	  && rm -rf "$$dc_destdir" \
686	  && $(MAKE) $(AM_MAKEFLAGS) dist \
687	  && rm -rf $(DIST_ARCHIVES) \
688	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
689	  && cd "$$am__cwd" \
690	  || exit 1
691	$(am__remove_distdir)
692	@(echo "$(distdir) archives ready for distribution: "; \
693	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
694	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
695distuninstallcheck:
696	@$(am__cd) '$(distuninstallcheck_dir)' \
697	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
698	   || { echo "ERROR: files left after uninstall:" ; \
699	        if test -n "$(DESTDIR)"; then \
700	          echo "  (check DESTDIR support)"; \
701	        fi ; \
702	        $(distuninstallcheck_listfiles) ; \
703	        exit 1; } >&2
704distcleancheck: distclean
705	@if test '$(srcdir)' = . ; then \
706	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
707	  exit 1 ; \
708	fi
709	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
710	  || { echo "ERROR: files left in build directory after distclean:" ; \
711	       $(distcleancheck_listfiles) ; \
712	       exit 1; } >&2
713check-am: all-am
714check: check-recursive
715all-am: Makefile $(PROGRAMS) config.h
716installdirs: installdirs-recursive
717installdirs-am:
718	for dir in "$(DESTDIR)$(bindir)"; do \
719	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
720	done
721install: install-recursive
722install-exec: install-exec-recursive
723install-data: install-data-recursive
724uninstall: uninstall-recursive
725
726install-am: all-am
727	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
728
729installcheck: installcheck-recursive
730install-strip:
731	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
732	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
733	  `test -z '$(STRIP)' || \
734	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
735mostlyclean-generic:
736
737clean-generic:
738
739distclean-generic:
740	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
741	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
742
743maintainer-clean-generic:
744	@echo "This command is intended for maintainers to use"
745	@echo "it deletes files that may require special tools to rebuild."
746	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
747clean: clean-recursive
748
749clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
750
751distclean: distclean-recursive
752	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
753	-rm -rf ./$(DEPDIR)
754	-rm -f Makefile
755distclean-am: clean-am distclean-compile distclean-generic \
756	distclean-hdr distclean-tags
757
758dvi: dvi-recursive
759
760dvi-am:
761
762html: html-recursive
763
764html-am:
765
766info: info-recursive
767
768info-am:
769
770install-data-am:
771
772install-dvi: install-dvi-recursive
773
774install-dvi-am:
775
776install-exec-am: install-binPROGRAMS
777
778install-html: install-html-recursive
779
780install-html-am:
781
782install-info: install-info-recursive
783
784install-info-am:
785
786install-man:
787
788install-pdf: install-pdf-recursive
789
790install-pdf-am:
791
792install-ps: install-ps-recursive
793
794install-ps-am:
795
796installcheck-am:
797
798maintainer-clean: maintainer-clean-recursive
799	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
800	-rm -rf $(top_srcdir)/autom4te.cache
801	-rm -rf ./$(DEPDIR)
802	-rm -f Makefile
803maintainer-clean-am: distclean-am maintainer-clean-generic
804
805mostlyclean: mostlyclean-recursive
806
807mostlyclean-am: mostlyclean-compile mostlyclean-generic
808
809pdf: pdf-recursive
810
811pdf-am:
812
813ps: ps-recursive
814
815ps-am:
816
817uninstall-am: uninstall-binPROGRAMS
818
819.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
820	ctags-recursive install-am install-strip tags-recursive
821
822.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
823	all all-am am--refresh check check-am clean clean-binPROGRAMS \
824	clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \
825	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
826	dist-zip distcheck distclean distclean-compile \
827	distclean-generic distclean-hdr distclean-tags distcleancheck \
828	distdir distuninstallcheck dvi dvi-am html html-am info \
829	info-am install install-am install-binPROGRAMS install-data \
830	install-data-am install-dvi install-dvi-am install-exec \
831	install-exec-am install-html install-html-am install-info \
832	install-info-am install-man install-pdf install-pdf-am \
833	install-ps install-ps-am install-strip installcheck \
834	installcheck-am installdirs installdirs-am maintainer-clean \
835	maintainer-clean-generic mostlyclean mostlyclean-compile \
836	mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
837	uninstall uninstall-am uninstall-binPROGRAMS
838
839
840.PHONY: ChangeLog INSTALL
841
842INSTALL:
843	$(INSTALL_CMD)
844
845ChangeLog:
846	$(CHANGELOG_CMD)
847
848dist-hook: ChangeLog INSTALL
849
850# Tell versions [3.59,3.63) of GNU make to not export all variables.
851# Otherwise a system limit (for SysV at least) may be exceeded.
852.NOEXPORT:
853