Makefile.in revision 07d2e718 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18# 
19#  Copyright 2005  Red Hat, Inc.
20# 
21#  Permission to use, copy, modify, distribute, and sell this software and its
22#  documentation for any purpose is hereby granted without fee, provided that
23#  the above copyright notice appear in all copies and that both that
24#  copyright notice and this permission notice appear in supporting
25#  documentation, and that the name of Red Hat not be used in
26#  advertising or publicity pertaining to distribution of the software without
27#  specific, written prior permission.  Red Hat makes no
28#  representations about the suitability of this software for any purpose.  It
29#  is provided "as is" without express or implied warranty.
30# 
31#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
32#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
33#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
34#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
35#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
36#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
37#  PERFORMANCE OF THIS SOFTWARE.
38
39VPATH = @srcdir@
40pkgdatadir = $(datadir)/@PACKAGE@
41pkgincludedir = $(includedir)/@PACKAGE@
42pkglibdir = $(libdir)/@PACKAGE@
43pkglibexecdir = $(libexecdir)/@PACKAGE@
44am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
45install_sh_DATA = $(install_sh) -c -m 644
46install_sh_PROGRAM = $(install_sh) -c
47install_sh_SCRIPT = $(install_sh) -c
48INSTALL_HEADER = $(INSTALL_DATA)
49transform = $(program_transform_name)
50NORMAL_INSTALL = :
51PRE_INSTALL = :
52POST_INSTALL = :
53NORMAL_UNINSTALL = :
54PRE_UNINSTALL = :
55POST_UNINSTALL = :
56build_triplet = @build@
57host_triplet = @host@
58bin_PROGRAMS = xkbcomp$(EXEEXT)
59subdir = .
60DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
61	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
62	$(top_srcdir)/configure COPYING ChangeLog INSTALL config.guess \
63	config.sub depcomp install-sh missing xkbparse.c ylwrap
64ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
65am__aclocal_m4_deps = $(top_srcdir)/configure.ac
66am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
67	$(ACLOCAL_M4)
68am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
69 configure.lineno config.status.lineno
70mkinstalldirs = $(install_sh) -d
71CONFIG_HEADER = config.h
72CONFIG_CLEAN_FILES =
73CONFIG_CLEAN_VPATH_FILES =
74am__installdirs = "$(DESTDIR)$(bindir)"
75PROGRAMS = $(bin_PROGRAMS)
76am_xkbcomp_OBJECTS = action.$(OBJEXT) alias.$(OBJEXT) compat.$(OBJEXT) \
77	expr.$(OBJEXT) geometry.$(OBJEXT) indicators.$(OBJEXT) \
78	keycodes.$(OBJEXT) keymap.$(OBJEXT) keytypes.$(OBJEXT) \
79	listing.$(OBJEXT) misc.$(OBJEXT) parseutils.$(OBJEXT) \
80	symbols.$(OBJEXT) utils.$(OBJEXT) vmod.$(OBJEXT) \
81	xkbcomp.$(OBJEXT) xkbparse.$(OBJEXT) xkbpath.$(OBJEXT) \
82	xkbscan.$(OBJEXT)
83xkbcomp_OBJECTS = $(am_xkbcomp_OBJECTS)
84am__DEPENDENCIES_1 =
85xkbcomp_DEPENDENCIES = $(am__DEPENDENCIES_1)
86DEFAULT_INCLUDES = -I.@am__isrc@
87depcomp = $(SHELL) $(top_srcdir)/depcomp
88am__depfiles_maybe = depfiles
89am__mv = mv -f
90COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
91	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
92AM_V_CC = $(am__v_CC_$(V))
93am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
94am__v_CC_0 = @echo "  CC    " $@;
95AM_V_at = $(am__v_at_$(V))
96am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
97am__v_at_0 = @
98CCLD = $(CC)
99LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
100AM_V_CCLD = $(am__v_CCLD_$(V))
101am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
102am__v_CCLD_0 = @echo "  CCLD  " $@;
103@MAINTAINER_MODE_FALSE@am__skipyacc = test -f $@ ||
104YACCCOMPILE = $(YACC) $(YFLAGS) $(AM_YFLAGS)
105AM_V_YACC = $(am__v_YACC_$(V))
106am__v_YACC_ = $(am__v_YACC_$(AM_DEFAULT_VERBOSITY))
107am__v_YACC_0 = @echo "  YACC  " $@;
108YLWRAP = $(top_srcdir)/ylwrap
109AM_V_GEN = $(am__v_GEN_$(V))
110am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
111am__v_GEN_0 = @echo "  GEN   " $@;
112SOURCES = $(xkbcomp_SOURCES)
113DIST_SOURCES = $(xkbcomp_SOURCES)
114RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
115	html-recursive info-recursive install-data-recursive \
116	install-dvi-recursive install-exec-recursive \
117	install-html-recursive install-info-recursive \
118	install-pdf-recursive install-ps-recursive install-recursive \
119	installcheck-recursive installdirs-recursive pdf-recursive \
120	ps-recursive uninstall-recursive
121RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
122  distclean-recursive maintainer-clean-recursive
123AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
124	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
125	distdir dist dist-all distcheck
126ETAGS = etags
127CTAGS = ctags
128DIST_SUBDIRS = $(SUBDIRS)
129DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
130distdir = $(PACKAGE)-$(VERSION)
131top_distdir = $(distdir)
132am__remove_distdir = \
133  { test ! -d "$(distdir)" \
134    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
135         && rm -fr "$(distdir)"; }; }
136am__relativize = \
137  dir0=`pwd`; \
138  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
139  sed_rest='s,^[^/]*/*,,'; \
140  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
141  sed_butlast='s,/*[^/]*$$,,'; \
142  while test -n "$$dir1"; do \
143    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
144    if test "$$first" != "."; then \
145      if test "$$first" = ".."; then \
146        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
147        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
148      else \
149        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
150        if test "$$first2" = "$$first"; then \
151          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
152        else \
153          dir2="../$$dir2"; \
154        fi; \
155        dir0="$$dir0"/"$$first"; \
156      fi; \
157    fi; \
158    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
159  done; \
160  reldir="$$dir2"
161DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
162GZIP_ENV = --best
163distuninstallcheck_listfiles = find . -type f -print
164distcleancheck_listfiles = find . -type f -print
165ACLOCAL = @ACLOCAL@
166ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
167ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
168AMTAR = @AMTAR@
169AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
170APP_MAN_DIR = @APP_MAN_DIR@
171APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
172AUTOCONF = @AUTOCONF@
173AUTOHEADER = @AUTOHEADER@
174AUTOMAKE = @AUTOMAKE@
175AWK = @AWK@
176CC = @CC@
177CCDEPMODE = @CCDEPMODE@
178CFLAGS = @CFLAGS@
179CHANGELOG_CMD = @CHANGELOG_CMD@
180CPP = @CPP@
181CPPFLAGS = @CPPFLAGS@
182CWARNFLAGS = @CWARNFLAGS@
183CYGPATH_W = @CYGPATH_W@
184DEFS = @DEFS@
185DEPDIR = @DEPDIR@
186DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
187DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
188ECHO_C = @ECHO_C@
189ECHO_N = @ECHO_N@
190ECHO_T = @ECHO_T@
191EGREP = @EGREP@
192EXEEXT = @EXEEXT@
193FILE_MAN_DIR = @FILE_MAN_DIR@
194FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
195GREP = @GREP@
196INSTALL = @INSTALL@
197INSTALL_CMD = @INSTALL_CMD@
198INSTALL_DATA = @INSTALL_DATA@
199INSTALL_PROGRAM = @INSTALL_PROGRAM@
200INSTALL_SCRIPT = @INSTALL_SCRIPT@
201INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
202LDFLAGS = @LDFLAGS@
203LIBOBJS = @LIBOBJS@
204LIBS = @LIBS@
205LIB_MAN_DIR = @LIB_MAN_DIR@
206LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
207LTLIBOBJS = @LTLIBOBJS@
208MAINT = @MAINT@
209MAKEINFO = @MAKEINFO@
210MAN_SUBSTS = @MAN_SUBSTS@
211MISC_MAN_DIR = @MISC_MAN_DIR@
212MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
213MKDIR_P = @MKDIR_P@
214OBJEXT = @OBJEXT@
215PACKAGE = @PACKAGE@
216PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
217PACKAGE_NAME = @PACKAGE_NAME@
218PACKAGE_STRING = @PACKAGE_STRING@
219PACKAGE_TARNAME = @PACKAGE_TARNAME@
220PACKAGE_URL = @PACKAGE_URL@
221PACKAGE_VERSION = @PACKAGE_VERSION@
222PATH_SEPARATOR = @PATH_SEPARATOR@
223PKG_CONFIG = @PKG_CONFIG@
224PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
225PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
226SED = @SED@
227SET_MAKE = @SET_MAKE@
228SHELL = @SHELL@
229STRIP = @STRIP@
230VERSION = @VERSION@
231XKBCOMP_CFLAGS = @XKBCOMP_CFLAGS@
232XKBCOMP_LIBS = @XKBCOMP_LIBS@
233XKBCONFIGROOT = @XKBCONFIGROOT@
234XORG_MAN_PAGE = @XORG_MAN_PAGE@
235YACC = @YACC@
236YACC_INST = @YACC_INST@
237YFLAGS = @YFLAGS@
238abs_builddir = @abs_builddir@
239abs_srcdir = @abs_srcdir@
240abs_top_builddir = @abs_top_builddir@
241abs_top_srcdir = @abs_top_srcdir@
242ac_ct_CC = @ac_ct_CC@
243am__include = @am__include@
244am__leading_dot = @am__leading_dot@
245am__quote = @am__quote@
246am__tar = @am__tar@
247am__untar = @am__untar@
248bindir = @bindir@
249build = @build@
250build_alias = @build_alias@
251build_cpu = @build_cpu@
252build_os = @build_os@
253build_vendor = @build_vendor@
254builddir = @builddir@
255datadir = @datadir@
256datarootdir = @datarootdir@
257docdir = @docdir@
258dvidir = @dvidir@
259exec_prefix = @exec_prefix@
260host = @host@
261host_alias = @host_alias@
262host_cpu = @host_cpu@
263host_os = @host_os@
264host_vendor = @host_vendor@
265htmldir = @htmldir@
266includedir = @includedir@
267infodir = @infodir@
268install_sh = @install_sh@
269libdir = @libdir@
270libexecdir = @libexecdir@
271localedir = @localedir@
272localstatedir = @localstatedir@
273mandir = @mandir@
274mkdir_p = @mkdir_p@
275oldincludedir = @oldincludedir@
276pdfdir = @pdfdir@
277prefix = @prefix@
278program_transform_name = @program_transform_name@
279psdir = @psdir@
280sbindir = @sbindir@
281sharedstatedir = @sharedstatedir@
282srcdir = @srcdir@
283sysconfdir = @sysconfdir@
284target_alias = @target_alias@
285top_build_prefix = @top_build_prefix@
286top_builddir = @top_builddir@
287top_srcdir = @top_srcdir@
288SUBDIRS = man
289AM_CFLAGS = $(XKBCOMP_CFLAGS) -DDFLT_XKB_CONFIG_ROOT='"$(XKBCONFIGROOT)"' $(CWARNFLAGS)
290xkbcomp_LDADD = $(XKBCOMP_LIBS)
291xkbcomp_SOURCES = \
292        action.c \
293        action.h \
294        alias.c \
295        alias.h \
296        compat.c \
297        compat.h \
298        expr.c \
299        expr.h \
300        geometry.c \
301        indicators.c \
302        indicators.h \
303        keycodes.c \
304        keycodes.h \
305        keymap.c \
306        keytypes.c \
307        listing.c \
308        misc.c \
309        misc.h \
310        parseutils.c \
311        parseutils.h \
312        symbols.c \
313        tokens.h \
314        utils.c \
315        utils.h \
316        vmod.c \
317        vmod.h \
318        xkbcomp.c \
319        xkbcomp.h \
320        xkbparse.y \
321        xkbpath.c \
322        xkbpath.h \
323        xkbscan.c
324
325BUILT_SOURCES = xkbparse.c
326MAINTAINERCLEANFILES = ChangeLog INSTALL $(BUILT_SOURCES)
327all: $(BUILT_SOURCES) config.h
328	$(MAKE) $(AM_MAKEFLAGS) all-recursive
329
330.SUFFIXES:
331.SUFFIXES: .c .o .obj .y
332am--refresh:
333	@:
334$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
335	@for dep in $?; do \
336	  case '$(am__configure_deps)' in \
337	    *$$dep*) \
338	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
339	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
340		&& exit 0; \
341	      exit 1;; \
342	  esac; \
343	done; \
344	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
345	$(am__cd) $(top_srcdir) && \
346	  $(AUTOMAKE) --foreign Makefile
347.PRECIOUS: Makefile
348Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
349	@case '$?' in \
350	  *config.status*) \
351	    echo ' $(SHELL) ./config.status'; \
352	    $(SHELL) ./config.status;; \
353	  *) \
354	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
355	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
356	esac;
357
358$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
359	$(SHELL) ./config.status --recheck
360
361$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
362	$(am__cd) $(srcdir) && $(AUTOCONF)
363$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
364	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
365$(am__aclocal_m4_deps):
366
367config.h: stamp-h1
368	@if test ! -f $@; then \
369	  rm -f stamp-h1; \
370	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
371	else :; fi
372
373stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
374	@rm -f stamp-h1
375	cd $(top_builddir) && $(SHELL) ./config.status config.h
376$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
377	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
378	rm -f stamp-h1
379	touch $@
380
381distclean-hdr:
382	-rm -f config.h stamp-h1
383install-binPROGRAMS: $(bin_PROGRAMS)
384	@$(NORMAL_INSTALL)
385	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
386	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
387	for p in $$list; do echo "$$p $$p"; done | \
388	sed 's/$(EXEEXT)$$//' | \
389	while read p p1; do if test -f $$p; \
390	  then echo "$$p"; echo "$$p"; else :; fi; \
391	done | \
392	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
393	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
394	sed 'N;N;N;s,\n, ,g' | \
395	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
396	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
397	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
398	    else { print "f", $$3 "/" $$4, $$1; } } \
399	  END { for (d in files) print "f", d, files[d] }' | \
400	while read type dir files; do \
401	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
402	    test -z "$$files" || { \
403	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
404	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
405	    } \
406	; done
407
408uninstall-binPROGRAMS:
409	@$(NORMAL_UNINSTALL)
410	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
411	files=`for p in $$list; do echo "$$p"; done | \
412	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
413	      -e 's/$$/$(EXEEXT)/' `; \
414	test -n "$$list" || exit 0; \
415	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
416	cd "$(DESTDIR)$(bindir)" && rm -f $$files
417
418clean-binPROGRAMS:
419	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
420xkbcomp$(EXEEXT): $(xkbcomp_OBJECTS) $(xkbcomp_DEPENDENCIES) 
421	@rm -f xkbcomp$(EXEEXT)
422	$(AM_V_CCLD)$(LINK) $(xkbcomp_OBJECTS) $(xkbcomp_LDADD) $(LIBS)
423
424mostlyclean-compile:
425	-rm -f *.$(OBJEXT)
426
427distclean-compile:
428	-rm -f *.tab.c
429
430@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/action.Po@am__quote@
431@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alias.Po@am__quote@
432@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/compat.Po@am__quote@
433@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/expr.Po@am__quote@
434@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geometry.Po@am__quote@
435@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/indicators.Po@am__quote@
436@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/keycodes.Po@am__quote@
437@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/keymap.Po@am__quote@
438@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/keytypes.Po@am__quote@
439@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/listing.Po@am__quote@
440@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Po@am__quote@
441@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parseutils.Po@am__quote@
442@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/symbols.Po@am__quote@
443@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@
444@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vmod.Po@am__quote@
445@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xkbcomp.Po@am__quote@
446@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xkbparse.Po@am__quote@
447@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xkbpath.Po@am__quote@
448@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xkbscan.Po@am__quote@
449
450.c.o:
451@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
452@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
453@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
454@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
455@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
456@am__fastdepCC_FALSE@	$(COMPILE) -c $<
457
458.c.obj:
459@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
460@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
461@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
462@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
463@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
464@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
465
466.y.c:
467	$(AM_V_YACC)$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h $*.h y.output $*.output -- $(YACCCOMPILE)
468
469# This directory's subdirectories are mostly independent; you can cd
470# into them and run `make' without going through this Makefile.
471# To change the values of `make' variables: instead of editing Makefiles,
472# (1) if the variable is set in `config.status', edit `config.status'
473#     (which will cause the Makefiles to be regenerated when you run `make');
474# (2) otherwise, pass the desired values on the `make' command line.
475$(RECURSIVE_TARGETS):
476	@fail= failcom='exit 1'; \
477	for f in x $$MAKEFLAGS; do \
478	  case $$f in \
479	    *=* | --[!k]*);; \
480	    *k*) failcom='fail=yes';; \
481	  esac; \
482	done; \
483	dot_seen=no; \
484	target=`echo $@ | sed s/-recursive//`; \
485	list='$(SUBDIRS)'; for subdir in $$list; do \
486	  echo "Making $$target in $$subdir"; \
487	  if test "$$subdir" = "."; then \
488	    dot_seen=yes; \
489	    local_target="$$target-am"; \
490	  else \
491	    local_target="$$target"; \
492	  fi; \
493	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
494	  || eval $$failcom; \
495	done; \
496	if test "$$dot_seen" = "no"; then \
497	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
498	fi; test -z "$$fail"
499
500$(RECURSIVE_CLEAN_TARGETS):
501	@fail= failcom='exit 1'; \
502	for f in x $$MAKEFLAGS; do \
503	  case $$f in \
504	    *=* | --[!k]*);; \
505	    *k*) failcom='fail=yes';; \
506	  esac; \
507	done; \
508	dot_seen=no; \
509	case "$@" in \
510	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
511	  *) list='$(SUBDIRS)' ;; \
512	esac; \
513	rev=''; for subdir in $$list; do \
514	  if test "$$subdir" = "."; then :; else \
515	    rev="$$subdir $$rev"; \
516	  fi; \
517	done; \
518	rev="$$rev ."; \
519	target=`echo $@ | sed s/-recursive//`; \
520	for subdir in $$rev; do \
521	  echo "Making $$target in $$subdir"; \
522	  if test "$$subdir" = "."; then \
523	    local_target="$$target-am"; \
524	  else \
525	    local_target="$$target"; \
526	  fi; \
527	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
528	  || eval $$failcom; \
529	done && test -z "$$fail"
530tags-recursive:
531	list='$(SUBDIRS)'; for subdir in $$list; do \
532	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
533	done
534ctags-recursive:
535	list='$(SUBDIRS)'; for subdir in $$list; do \
536	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
537	done
538
539ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
540	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
541	unique=`for i in $$list; do \
542	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
543	  done | \
544	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
545	      END { if (nonempty) { for (i in files) print i; }; }'`; \
546	mkid -fID $$unique
547tags: TAGS
548
549TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
550		$(TAGS_FILES) $(LISP)
551	set x; \
552	here=`pwd`; \
553	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
554	  include_option=--etags-include; \
555	  empty_fix=.; \
556	else \
557	  include_option=--include; \
558	  empty_fix=; \
559	fi; \
560	list='$(SUBDIRS)'; for subdir in $$list; do \
561	  if test "$$subdir" = .; then :; else \
562	    test ! -f $$subdir/TAGS || \
563	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
564	  fi; \
565	done; \
566	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
567	unique=`for i in $$list; do \
568	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
569	  done | \
570	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
571	      END { if (nonempty) { for (i in files) print i; }; }'`; \
572	shift; \
573	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
574	  test -n "$$unique" || unique=$$empty_fix; \
575	  if test $$# -gt 0; then \
576	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
577	      "$$@" $$unique; \
578	  else \
579	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
580	      $$unique; \
581	  fi; \
582	fi
583ctags: CTAGS
584CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
585		$(TAGS_FILES) $(LISP)
586	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
587	unique=`for i in $$list; do \
588	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
589	  done | \
590	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
591	      END { if (nonempty) { for (i in files) print i; }; }'`; \
592	test -z "$(CTAGS_ARGS)$$unique" \
593	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
594	     $$unique
595
596GTAGS:
597	here=`$(am__cd) $(top_builddir) && pwd` \
598	  && $(am__cd) $(top_srcdir) \
599	  && gtags -i $(GTAGS_ARGS) "$$here"
600
601distclean-tags:
602	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
603
604distdir: $(DISTFILES)
605	$(am__remove_distdir)
606	test -d "$(distdir)" || mkdir "$(distdir)"
607	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
608	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
609	list='$(DISTFILES)'; \
610	  dist_files=`for file in $$list; do echo $$file; done | \
611	  sed -e "s|^$$srcdirstrip/||;t" \
612	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
613	case $$dist_files in \
614	  */*) $(MKDIR_P) `echo "$$dist_files" | \
615			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
616			   sort -u` ;; \
617	esac; \
618	for file in $$dist_files; do \
619	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
620	  if test -d $$d/$$file; then \
621	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
622	    if test -d "$(distdir)/$$file"; then \
623	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
624	    fi; \
625	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
626	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
627	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
628	    fi; \
629	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
630	  else \
631	    test -f "$(distdir)/$$file" \
632	    || cp -p $$d/$$file "$(distdir)/$$file" \
633	    || exit 1; \
634	  fi; \
635	done
636	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
637	  if test "$$subdir" = .; then :; else \
638	    test -d "$(distdir)/$$subdir" \
639	    || $(MKDIR_P) "$(distdir)/$$subdir" \
640	    || exit 1; \
641	  fi; \
642	done
643	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
644	  if test "$$subdir" = .; then :; else \
645	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
646	    $(am__relativize); \
647	    new_distdir=$$reldir; \
648	    dir1=$$subdir; dir2="$(top_distdir)"; \
649	    $(am__relativize); \
650	    new_top_distdir=$$reldir; \
651	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
652	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
653	    ($(am__cd) $$subdir && \
654	      $(MAKE) $(AM_MAKEFLAGS) \
655	        top_distdir="$$new_top_distdir" \
656	        distdir="$$new_distdir" \
657		am__remove_distdir=: \
658		am__skip_length_check=: \
659		am__skip_mode_fix=: \
660	        distdir) \
661	      || exit 1; \
662	  fi; \
663	done
664	$(MAKE) $(AM_MAKEFLAGS) \
665	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
666	  dist-hook
667	-test -n "$(am__skip_mode_fix)" \
668	|| find "$(distdir)" -type d ! -perm -755 \
669		-exec chmod u+rwx,go+rx {} \; -o \
670	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
671	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
672	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
673	|| chmod -R a+r "$(distdir)"
674dist-gzip: distdir
675	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
676	$(am__remove_distdir)
677dist-bzip2: distdir
678	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
679	$(am__remove_distdir)
680
681dist-lzma: distdir
682	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
683	$(am__remove_distdir)
684
685dist-xz: distdir
686	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
687	$(am__remove_distdir)
688
689dist-tarZ: distdir
690	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
691	$(am__remove_distdir)
692
693dist-shar: distdir
694	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
695	$(am__remove_distdir)
696
697dist-zip: distdir
698	-rm -f $(distdir).zip
699	zip -rq $(distdir).zip $(distdir)
700	$(am__remove_distdir)
701
702dist dist-all: distdir
703	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
704	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
705	$(am__remove_distdir)
706
707# This target untars the dist file and tries a VPATH configuration.  Then
708# it guarantees that the distribution is self-contained by making another
709# tarfile.
710distcheck: dist
711	case '$(DIST_ARCHIVES)' in \
712	*.tar.gz*) \
713	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
714	*.tar.bz2*) \
715	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
716	*.tar.lzma*) \
717	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
718	*.tar.xz*) \
719	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
720	*.tar.Z*) \
721	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
722	*.shar.gz*) \
723	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
724	*.zip*) \
725	  unzip $(distdir).zip ;;\
726	esac
727	chmod -R a-w $(distdir); chmod a+w $(distdir)
728	mkdir $(distdir)/_build
729	mkdir $(distdir)/_inst
730	chmod a-w $(distdir)
731	test -d $(distdir)/_build || exit 0; \
732	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
733	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
734	  && am__cwd=`pwd` \
735	  && $(am__cd) $(distdir)/_build \
736	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
737	    $(DISTCHECK_CONFIGURE_FLAGS) \
738	  && $(MAKE) $(AM_MAKEFLAGS) \
739	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
740	  && $(MAKE) $(AM_MAKEFLAGS) check \
741	  && $(MAKE) $(AM_MAKEFLAGS) install \
742	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
743	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
744	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
745	        distuninstallcheck \
746	  && chmod -R a-w "$$dc_install_base" \
747	  && ({ \
748	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
749	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
750	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
751	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
752	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
753	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
754	  && rm -rf "$$dc_destdir" \
755	  && $(MAKE) $(AM_MAKEFLAGS) dist \
756	  && rm -rf $(DIST_ARCHIVES) \
757	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
758	  && cd "$$am__cwd" \
759	  || exit 1
760	$(am__remove_distdir)
761	@(echo "$(distdir) archives ready for distribution: "; \
762	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
763	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
764distuninstallcheck:
765	@$(am__cd) '$(distuninstallcheck_dir)' \
766	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
767	   || { echo "ERROR: files left after uninstall:" ; \
768	        if test -n "$(DESTDIR)"; then \
769	          echo "  (check DESTDIR support)"; \
770	        fi ; \
771	        $(distuninstallcheck_listfiles) ; \
772	        exit 1; } >&2
773distcleancheck: distclean
774	@if test '$(srcdir)' = . ; then \
775	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
776	  exit 1 ; \
777	fi
778	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
779	  || { echo "ERROR: files left in build directory after distclean:" ; \
780	       $(distcleancheck_listfiles) ; \
781	       exit 1; } >&2
782check-am: all-am
783check: $(BUILT_SOURCES)
784	$(MAKE) $(AM_MAKEFLAGS) check-recursive
785all-am: Makefile $(PROGRAMS) config.h
786installdirs: installdirs-recursive
787installdirs-am:
788	for dir in "$(DESTDIR)$(bindir)"; do \
789	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
790	done
791install: $(BUILT_SOURCES)
792	$(MAKE) $(AM_MAKEFLAGS) install-recursive
793install-exec: install-exec-recursive
794install-data: install-data-recursive
795uninstall: uninstall-recursive
796
797install-am: all-am
798	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
799
800installcheck: installcheck-recursive
801install-strip:
802	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
803	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
804	  `test -z '$(STRIP)' || \
805	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
806mostlyclean-generic:
807
808clean-generic:
809
810distclean-generic:
811	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
812	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
813
814maintainer-clean-generic:
815	@echo "This command is intended for maintainers to use"
816	@echo "it deletes files that may require special tools to rebuild."
817	-rm -f xkbparse.c
818	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
819	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
820clean: clean-recursive
821
822clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
823
824distclean: distclean-recursive
825	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
826	-rm -rf ./$(DEPDIR)
827	-rm -f Makefile
828distclean-am: clean-am distclean-compile distclean-generic \
829	distclean-hdr distclean-tags
830
831dvi: dvi-recursive
832
833dvi-am:
834
835html: html-recursive
836
837html-am:
838
839info: info-recursive
840
841info-am:
842
843install-data-am:
844
845install-dvi: install-dvi-recursive
846
847install-dvi-am:
848
849install-exec-am: install-binPROGRAMS
850
851install-html: install-html-recursive
852
853install-html-am:
854
855install-info: install-info-recursive
856
857install-info-am:
858
859install-man:
860
861install-pdf: install-pdf-recursive
862
863install-pdf-am:
864
865install-ps: install-ps-recursive
866
867install-ps-am:
868
869installcheck-am:
870
871maintainer-clean: maintainer-clean-recursive
872	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
873	-rm -rf $(top_srcdir)/autom4te.cache
874	-rm -rf ./$(DEPDIR)
875	-rm -f Makefile
876maintainer-clean-am: distclean-am maintainer-clean-generic
877
878mostlyclean: mostlyclean-recursive
879
880mostlyclean-am: mostlyclean-compile mostlyclean-generic
881
882pdf: pdf-recursive
883
884pdf-am:
885
886ps: ps-recursive
887
888ps-am:
889
890uninstall-am: uninstall-binPROGRAMS
891
892.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
893	ctags-recursive install install-am install-strip \
894	tags-recursive
895
896.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
897	all all-am am--refresh check check-am clean clean-binPROGRAMS \
898	clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \
899	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
900	dist-zip distcheck distclean distclean-compile \
901	distclean-generic distclean-hdr distclean-tags distcleancheck \
902	distdir distuninstallcheck dvi dvi-am html html-am info \
903	info-am install install-am install-binPROGRAMS install-data \
904	install-data-am install-dvi install-dvi-am install-exec \
905	install-exec-am install-html install-html-am install-info \
906	install-info-am install-man install-pdf install-pdf-am \
907	install-ps install-ps-am install-strip installcheck \
908	installcheck-am installdirs installdirs-am maintainer-clean \
909	maintainer-clean-generic mostlyclean mostlyclean-compile \
910	mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
911	uninstall uninstall-am uninstall-binPROGRAMS
912
913
914.PHONY: ChangeLog INSTALL
915
916INSTALL:
917	$(INSTALL_CMD)
918
919ChangeLog:
920	$(CHANGELOG_CMD)
921
922dist-hook: ChangeLog INSTALL
923
924# Tell versions [3.59,3.63) of GNU make to not export all variables.
925# Otherwise a system limit (for SysV at least) may be exceeded.
926.NOEXPORT:
927