Makefile.in revision fc34a306 
1# Makefile.in generated by automake 1.16.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2018 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# 
18#  Copyright 2005  Red Hat, Inc.
19# 
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Red Hat not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Red Hat makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29# 
30#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38VPATH = @srcdir@
39am__is_gnu_make = { \
40  if test -z '$(MAKELEVEL)'; then \
41    false; \
42  elif test -n '$(MAKE_HOST)'; then \
43    true; \
44  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
45    true; \
46  else \
47    false; \
48  fi; \
49}
50am__make_running_with_option = \
51  case $${target_option-} in \
52      ?) ;; \
53      *) echo "am__make_running_with_option: internal error: invalid" \
54              "target option '$${target_option-}' specified" >&2; \
55         exit 1;; \
56  esac; \
57  has_opt=no; \
58  sane_makeflags=$$MAKEFLAGS; \
59  if $(am__is_gnu_make); then \
60    sane_makeflags=$$MFLAGS; \
61  else \
62    case $$MAKEFLAGS in \
63      *\\[\ \	]*) \
64        bs=\\; \
65        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
66          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
67    esac; \
68  fi; \
69  skip_next=no; \
70  strip_trailopt () \
71  { \
72    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
73  }; \
74  for flg in $$sane_makeflags; do \
75    test $$skip_next = yes && { skip_next=no; continue; }; \
76    case $$flg in \
77      *=*|--*) continue;; \
78        -*I) strip_trailopt 'I'; skip_next=yes;; \
79      -*I?*) strip_trailopt 'I';; \
80        -*O) strip_trailopt 'O'; skip_next=yes;; \
81      -*O?*) strip_trailopt 'O';; \
82        -*l) strip_trailopt 'l'; skip_next=yes;; \
83      -*l?*) strip_trailopt 'l';; \
84      -[dEDm]) skip_next=yes;; \
85      -[JT]) skip_next=yes;; \
86    esac; \
87    case $$flg in \
88      *$$target_option*) has_opt=yes; break;; \
89    esac; \
90  done; \
91  test $$has_opt = yes
92am__make_dryrun = (target_option=n; $(am__make_running_with_option))
93am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
94pkgdatadir = $(datadir)/@PACKAGE@
95pkgincludedir = $(includedir)/@PACKAGE@
96pkglibdir = $(libdir)/@PACKAGE@
97pkglibexecdir = $(libexecdir)/@PACKAGE@
98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
99install_sh_DATA = $(install_sh) -c -m 644
100install_sh_PROGRAM = $(install_sh) -c
101install_sh_SCRIPT = $(install_sh) -c
102INSTALL_HEADER = $(INSTALL_DATA)
103transform = $(program_transform_name)
104NORMAL_INSTALL = :
105PRE_INSTALL = :
106POST_INSTALL = :
107NORMAL_UNINSTALL = :
108PRE_UNINSTALL = :
109POST_UNINSTALL = :
110build_triplet = @build@
111host_triplet = @host@
112bin_PROGRAMS = xkbprint$(EXEEXT)
113subdir = .
114ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
115am__aclocal_m4_deps = $(top_srcdir)/configure.ac
116am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
117	$(ACLOCAL_M4)
118DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
119	$(am__configure_deps) $(am__DIST_COMMON)
120am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
121 configure.lineno config.status.lineno
122mkinstalldirs = $(install_sh) -d
123CONFIG_HEADER = config.h
124CONFIG_CLEAN_FILES =
125CONFIG_CLEAN_VPATH_FILES =
126am__installdirs = "$(DESTDIR)$(bindir)"
127PROGRAMS = $(bin_PROGRAMS)
128am_xkbprint_OBJECTS = psgeom.$(OBJEXT) utils.$(OBJEXT) \
129	xkbprint.$(OBJEXT)
130xkbprint_OBJECTS = $(am_xkbprint_OBJECTS)
131am__DEPENDENCIES_1 =
132xkbprint_DEPENDENCIES = $(am__DEPENDENCIES_1)
133AM_V_P = $(am__v_P_@AM_V@)
134am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
135am__v_P_0 = false
136am__v_P_1 = :
137AM_V_GEN = $(am__v_GEN_@AM_V@)
138am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
139am__v_GEN_0 = @echo "  GEN     " $@;
140am__v_GEN_1 = 
141AM_V_at = $(am__v_at_@AM_V@)
142am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
143am__v_at_0 = @
144am__v_at_1 = 
145DEFAULT_INCLUDES = -I.@am__isrc@
146depcomp = $(SHELL) $(top_srcdir)/depcomp
147am__maybe_remake_depfiles = depfiles
148am__depfiles_remade = ./$(DEPDIR)/psgeom.Po ./$(DEPDIR)/utils.Po \
149	./$(DEPDIR)/xkbprint.Po
150am__mv = mv -f
151COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
152	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
153AM_V_CC = $(am__v_CC_@AM_V@)
154am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
155am__v_CC_0 = @echo "  CC      " $@;
156am__v_CC_1 = 
157CCLD = $(CC)
158LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
159AM_V_CCLD = $(am__v_CCLD_@AM_V@)
160am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
161am__v_CCLD_0 = @echo "  CCLD    " $@;
162am__v_CCLD_1 = 
163SOURCES = $(xkbprint_SOURCES)
164DIST_SOURCES = $(xkbprint_SOURCES)
165RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
166	ctags-recursive dvi-recursive html-recursive info-recursive \
167	install-data-recursive install-dvi-recursive \
168	install-exec-recursive install-html-recursive \
169	install-info-recursive install-pdf-recursive \
170	install-ps-recursive install-recursive installcheck-recursive \
171	installdirs-recursive pdf-recursive ps-recursive \
172	tags-recursive uninstall-recursive
173am__can_run_installinfo = \
174  case $$AM_UPDATE_INFO_DIR in \
175    n|no|NO) false;; \
176    *) (install-info --version) >/dev/null 2>&1;; \
177  esac
178RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
179  distclean-recursive maintainer-clean-recursive
180am__recursive_targets = \
181  $(RECURSIVE_TARGETS) \
182  $(RECURSIVE_CLEAN_TARGETS) \
183  $(am__extra_recursive_targets)
184AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
185	cscope distdir distdir-am dist dist-all distcheck
186am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
187	$(LISP)config.h.in
188# Read a list of newline-separated strings from the standard input,
189# and print each of them once, without duplicates.  Input order is
190# *not* preserved.
191am__uniquify_input = $(AWK) '\
192  BEGIN { nonempty = 0; } \
193  { items[$$0] = 1; nonempty = 1; } \
194  END { if (nonempty) { for (i in items) print i; }; } \
195'
196# Make sure the list of sources is unique.  This is necessary because,
197# e.g., the same source file might be shared among _SOURCES variables
198# for different programs/libraries.
199am__define_uniq_tagged_files = \
200  list='$(am__tagged_files)'; \
201  unique=`for i in $$list; do \
202    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
203  done | $(am__uniquify_input)`
204ETAGS = etags
205CTAGS = ctags
206CSCOPE = cscope
207DIST_SUBDIRS = $(SUBDIRS)
208am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \
209	ChangeLog INSTALL compile config.guess config.sub depcomp \
210	install-sh missing
211DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
212distdir = $(PACKAGE)-$(VERSION)
213top_distdir = $(distdir)
214am__remove_distdir = \
215  if test -d "$(distdir)"; then \
216    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
217      && rm -rf "$(distdir)" \
218      || { sleep 5 && rm -rf "$(distdir)"; }; \
219  else :; fi
220am__post_remove_distdir = $(am__remove_distdir)
221am__relativize = \
222  dir0=`pwd`; \
223  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
224  sed_rest='s,^[^/]*/*,,'; \
225  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
226  sed_butlast='s,/*[^/]*$$,,'; \
227  while test -n "$$dir1"; do \
228    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
229    if test "$$first" != "."; then \
230      if test "$$first" = ".."; then \
231        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
232        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
233      else \
234        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
235        if test "$$first2" = "$$first"; then \
236          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
237        else \
238          dir2="../$$dir2"; \
239        fi; \
240        dir0="$$dir0"/"$$first"; \
241      fi; \
242    fi; \
243    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
244  done; \
245  reldir="$$dir2"
246DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
247GZIP_ENV = --best
248DIST_TARGETS = dist-bzip2 dist-gzip
249distuninstallcheck_listfiles = find . -type f -print
250am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
251  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
252distcleancheck_listfiles = find . -type f -print
253ACLOCAL = @ACLOCAL@
254ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
255ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
256AMTAR = @AMTAR@
257AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
258APP_MAN_DIR = @APP_MAN_DIR@
259APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
260AUTOCONF = @AUTOCONF@
261AUTOHEADER = @AUTOHEADER@
262AUTOMAKE = @AUTOMAKE@
263AWK = @AWK@
264BASE_CFLAGS = @BASE_CFLAGS@
265CC = @CC@
266CCDEPMODE = @CCDEPMODE@
267CFLAGS = @CFLAGS@
268CHANGELOG_CMD = @CHANGELOG_CMD@
269CPP = @CPP@
270CPPFLAGS = @CPPFLAGS@
271CWARNFLAGS = @CWARNFLAGS@
272CYGPATH_W = @CYGPATH_W@
273DEFS = @DEFS@
274DEPDIR = @DEPDIR@
275DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
276DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
277ECHO_C = @ECHO_C@
278ECHO_N = @ECHO_N@
279ECHO_T = @ECHO_T@
280EGREP = @EGREP@
281EXEEXT = @EXEEXT@
282FILE_MAN_DIR = @FILE_MAN_DIR@
283FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
284GREP = @GREP@
285INSTALL = @INSTALL@
286INSTALL_CMD = @INSTALL_CMD@
287INSTALL_DATA = @INSTALL_DATA@
288INSTALL_PROGRAM = @INSTALL_PROGRAM@
289INSTALL_SCRIPT = @INSTALL_SCRIPT@
290INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
291LDFLAGS = @LDFLAGS@
292LIBOBJS = @LIBOBJS@
293LIBS = @LIBS@
294LIB_MAN_DIR = @LIB_MAN_DIR@
295LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
296LTLIBOBJS = @LTLIBOBJS@
297MAKEINFO = @MAKEINFO@
298MAN_SUBSTS = @MAN_SUBSTS@
299MISC_MAN_DIR = @MISC_MAN_DIR@
300MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
301MKDIR_P = @MKDIR_P@
302OBJEXT = @OBJEXT@
303PACKAGE = @PACKAGE@
304PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
305PACKAGE_NAME = @PACKAGE_NAME@
306PACKAGE_STRING = @PACKAGE_STRING@
307PACKAGE_TARNAME = @PACKAGE_TARNAME@
308PACKAGE_URL = @PACKAGE_URL@
309PACKAGE_VERSION = @PACKAGE_VERSION@
310PATH_SEPARATOR = @PATH_SEPARATOR@
311PKG_CONFIG = @PKG_CONFIG@
312PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
313PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
314SED = @SED@
315SET_MAKE = @SET_MAKE@
316SHELL = @SHELL@
317STRICT_CFLAGS = @STRICT_CFLAGS@
318STRIP = @STRIP@
319VERSION = @VERSION@
320XKBPRINT_CFLAGS = @XKBPRINT_CFLAGS@
321XKBPRINT_LIBS = @XKBPRINT_LIBS@
322XORG_MAN_PAGE = @XORG_MAN_PAGE@
323abs_builddir = @abs_builddir@
324abs_srcdir = @abs_srcdir@
325abs_top_builddir = @abs_top_builddir@
326abs_top_srcdir = @abs_top_srcdir@
327ac_ct_CC = @ac_ct_CC@
328am__include = @am__include@
329am__leading_dot = @am__leading_dot@
330am__quote = @am__quote@
331am__tar = @am__tar@
332am__untar = @am__untar@
333bindir = @bindir@
334build = @build@
335build_alias = @build_alias@
336build_cpu = @build_cpu@
337build_os = @build_os@
338build_vendor = @build_vendor@
339builddir = @builddir@
340datadir = @datadir@
341datarootdir = @datarootdir@
342docdir = @docdir@
343dvidir = @dvidir@
344exec_prefix = @exec_prefix@
345host = @host@
346host_alias = @host_alias@
347host_cpu = @host_cpu@
348host_os = @host_os@
349host_vendor = @host_vendor@
350htmldir = @htmldir@
351includedir = @includedir@
352infodir = @infodir@
353install_sh = @install_sh@
354libdir = @libdir@
355libexecdir = @libexecdir@
356localedir = @localedir@
357localstatedir = @localstatedir@
358mandir = @mandir@
359mkdir_p = @mkdir_p@
360oldincludedir = @oldincludedir@
361pdfdir = @pdfdir@
362prefix = @prefix@
363program_transform_name = @program_transform_name@
364psdir = @psdir@
365sbindir = @sbindir@
366sharedstatedir = @sharedstatedir@
367srcdir = @srcdir@
368sysconfdir = @sysconfdir@
369target_alias = @target_alias@
370top_build_prefix = @top_build_prefix@
371top_builddir = @top_builddir@
372top_srcdir = @top_srcdir@
373SUBDIRS = man
374AM_CFLAGS = $(CWARNFLAGS) $(XKBPRINT_CFLAGS)
375xkbprint_LDADD = $(XKBPRINT_LIBS)
376xkbprint_SOURCES = \
377        isokeys.h \
378        psgeom.c \
379        utils.c \
380        utils.h \
381        xkbprint.c \
382        xkbprint.h
383
384MAINTAINERCLEANFILES = ChangeLog INSTALL
385EXTRA_DIST = README.md
386all: config.h
387	$(MAKE) $(AM_MAKEFLAGS) all-recursive
388
389.SUFFIXES:
390.SUFFIXES: .c .o .obj
391am--refresh: Makefile
392	@:
393$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
394	@for dep in $?; do \
395	  case '$(am__configure_deps)' in \
396	    *$$dep*) \
397	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
398	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
399		&& exit 0; \
400	      exit 1;; \
401	  esac; \
402	done; \
403	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
404	$(am__cd) $(top_srcdir) && \
405	  $(AUTOMAKE) --foreign Makefile
406Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
407	@case '$?' in \
408	  *config.status*) \
409	    echo ' $(SHELL) ./config.status'; \
410	    $(SHELL) ./config.status;; \
411	  *) \
412	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
413	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
414	esac;
415
416$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
417	$(SHELL) ./config.status --recheck
418
419$(top_srcdir)/configure:  $(am__configure_deps)
420	$(am__cd) $(srcdir) && $(AUTOCONF)
421$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
422	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
423$(am__aclocal_m4_deps):
424
425config.h: stamp-h1
426	@test -f $@ || rm -f stamp-h1
427	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
428
429stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
430	@rm -f stamp-h1
431	cd $(top_builddir) && $(SHELL) ./config.status config.h
432$(srcdir)/config.h.in:  $(am__configure_deps) 
433	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
434	rm -f stamp-h1
435	touch $@
436
437distclean-hdr:
438	-rm -f config.h stamp-h1
439install-binPROGRAMS: $(bin_PROGRAMS)
440	@$(NORMAL_INSTALL)
441	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
442	if test -n "$$list"; then \
443	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
444	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
445	fi; \
446	for p in $$list; do echo "$$p $$p"; done | \
447	sed 's/$(EXEEXT)$$//' | \
448	while read p p1; do if test -f $$p \
449	  ; then echo "$$p"; echo "$$p"; else :; fi; \
450	done | \
451	sed -e 'p;s,.*/,,;n;h' \
452	    -e 's|.*|.|' \
453	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
454	sed 'N;N;N;s,\n, ,g' | \
455	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
456	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
457	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
458	    else { print "f", $$3 "/" $$4, $$1; } } \
459	  END { for (d in files) print "f", d, files[d] }' | \
460	while read type dir files; do \
461	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
462	    test -z "$$files" || { \
463	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
464	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
465	    } \
466	; done
467
468uninstall-binPROGRAMS:
469	@$(NORMAL_UNINSTALL)
470	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
471	files=`for p in $$list; do echo "$$p"; done | \
472	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
473	      -e 's/$$/$(EXEEXT)/' \
474	`; \
475	test -n "$$list" || exit 0; \
476	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
477	cd "$(DESTDIR)$(bindir)" && rm -f $$files
478
479clean-binPROGRAMS:
480	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
481
482xkbprint$(EXEEXT): $(xkbprint_OBJECTS) $(xkbprint_DEPENDENCIES) $(EXTRA_xkbprint_DEPENDENCIES) 
483	@rm -f xkbprint$(EXEEXT)
484	$(AM_V_CCLD)$(LINK) $(xkbprint_OBJECTS) $(xkbprint_LDADD) $(LIBS)
485
486mostlyclean-compile:
487	-rm -f *.$(OBJEXT)
488
489distclean-compile:
490	-rm -f *.tab.c
491
492@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/psgeom.Po@am__quote@ # am--include-marker
493@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@ # am--include-marker
494@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xkbprint.Po@am__quote@ # am--include-marker
495
496$(am__depfiles_remade):
497	@$(MKDIR_P) $(@D)
498	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
499
500am--depfiles: $(am__depfiles_remade)
501
502.c.o:
503@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
504@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
505@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
506@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
507@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
508
509.c.obj:
510@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
511@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
512@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
513@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
514@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
515
516# This directory's subdirectories are mostly independent; you can cd
517# into them and run 'make' without going through this Makefile.
518# To change the values of 'make' variables: instead of editing Makefiles,
519# (1) if the variable is set in 'config.status', edit 'config.status'
520#     (which will cause the Makefiles to be regenerated when you run 'make');
521# (2) otherwise, pass the desired values on the 'make' command line.
522$(am__recursive_targets):
523	@fail=; \
524	if $(am__make_keepgoing); then \
525	  failcom='fail=yes'; \
526	else \
527	  failcom='exit 1'; \
528	fi; \
529	dot_seen=no; \
530	target=`echo $@ | sed s/-recursive//`; \
531	case "$@" in \
532	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
533	  *) list='$(SUBDIRS)' ;; \
534	esac; \
535	for subdir in $$list; do \
536	  echo "Making $$target in $$subdir"; \
537	  if test "$$subdir" = "."; then \
538	    dot_seen=yes; \
539	    local_target="$$target-am"; \
540	  else \
541	    local_target="$$target"; \
542	  fi; \
543	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
544	  || eval $$failcom; \
545	done; \
546	if test "$$dot_seen" = "no"; then \
547	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
548	fi; test -z "$$fail"
549
550ID: $(am__tagged_files)
551	$(am__define_uniq_tagged_files); mkid -fID $$unique
552tags: tags-recursive
553TAGS: tags
554
555tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
556	set x; \
557	here=`pwd`; \
558	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
559	  include_option=--etags-include; \
560	  empty_fix=.; \
561	else \
562	  include_option=--include; \
563	  empty_fix=; \
564	fi; \
565	list='$(SUBDIRS)'; for subdir in $$list; do \
566	  if test "$$subdir" = .; then :; else \
567	    test ! -f $$subdir/TAGS || \
568	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
569	  fi; \
570	done; \
571	$(am__define_uniq_tagged_files); \
572	shift; \
573	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
574	  test -n "$$unique" || unique=$$empty_fix; \
575	  if test $$# -gt 0; then \
576	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
577	      "$$@" $$unique; \
578	  else \
579	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
580	      $$unique; \
581	  fi; \
582	fi
583ctags: ctags-recursive
584
585CTAGS: ctags
586ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
587	$(am__define_uniq_tagged_files); \
588	test -z "$(CTAGS_ARGS)$$unique" \
589	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
590	     $$unique
591
592GTAGS:
593	here=`$(am__cd) $(top_builddir) && pwd` \
594	  && $(am__cd) $(top_srcdir) \
595	  && gtags -i $(GTAGS_ARGS) "$$here"
596cscope: cscope.files
597	test ! -s cscope.files \
598	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
599clean-cscope:
600	-rm -f cscope.files
601cscope.files: clean-cscope cscopelist
602cscopelist: cscopelist-recursive
603
604cscopelist-am: $(am__tagged_files)
605	list='$(am__tagged_files)'; \
606	case "$(srcdir)" in \
607	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
608	  *) sdir=$(subdir)/$(srcdir) ;; \
609	esac; \
610	for i in $$list; do \
611	  if test -f "$$i"; then \
612	    echo "$(subdir)/$$i"; \
613	  else \
614	    echo "$$sdir/$$i"; \
615	  fi; \
616	done >> $(top_builddir)/cscope.files
617
618distclean-tags:
619	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
620	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
621
622distdir: $(BUILT_SOURCES)
623	$(MAKE) $(AM_MAKEFLAGS) distdir-am
624
625distdir-am: $(DISTFILES)
626	$(am__remove_distdir)
627	test -d "$(distdir)" || mkdir "$(distdir)"
628	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
629	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
630	list='$(DISTFILES)'; \
631	  dist_files=`for file in $$list; do echo $$file; done | \
632	  sed -e "s|^$$srcdirstrip/||;t" \
633	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
634	case $$dist_files in \
635	  */*) $(MKDIR_P) `echo "$$dist_files" | \
636			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
637			   sort -u` ;; \
638	esac; \
639	for file in $$dist_files; do \
640	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
641	  if test -d $$d/$$file; then \
642	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
643	    if test -d "$(distdir)/$$file"; then \
644	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
645	    fi; \
646	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
647	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
648	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
649	    fi; \
650	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
651	  else \
652	    test -f "$(distdir)/$$file" \
653	    || cp -p $$d/$$file "$(distdir)/$$file" \
654	    || exit 1; \
655	  fi; \
656	done
657	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
658	  if test "$$subdir" = .; then :; else \
659	    $(am__make_dryrun) \
660	      || test -d "$(distdir)/$$subdir" \
661	      || $(MKDIR_P) "$(distdir)/$$subdir" \
662	      || exit 1; \
663	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
664	    $(am__relativize); \
665	    new_distdir=$$reldir; \
666	    dir1=$$subdir; dir2="$(top_distdir)"; \
667	    $(am__relativize); \
668	    new_top_distdir=$$reldir; \
669	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
670	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
671	    ($(am__cd) $$subdir && \
672	      $(MAKE) $(AM_MAKEFLAGS) \
673	        top_distdir="$$new_top_distdir" \
674	        distdir="$$new_distdir" \
675		am__remove_distdir=: \
676		am__skip_length_check=: \
677		am__skip_mode_fix=: \
678	        distdir) \
679	      || exit 1; \
680	  fi; \
681	done
682	$(MAKE) $(AM_MAKEFLAGS) \
683	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
684	  dist-hook
685	-test -n "$(am__skip_mode_fix)" \
686	|| find "$(distdir)" -type d ! -perm -755 \
687		-exec chmod u+rwx,go+rx {} \; -o \
688	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
689	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
690	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
691	|| chmod -R a+r "$(distdir)"
692dist-gzip: distdir
693	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
694	$(am__post_remove_distdir)
695dist-bzip2: distdir
696	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
697	$(am__post_remove_distdir)
698
699dist-lzip: distdir
700	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
701	$(am__post_remove_distdir)
702
703dist-xz: distdir
704	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
705	$(am__post_remove_distdir)
706
707dist-tarZ: distdir
708	@echo WARNING: "Support for distribution archives compressed with" \
709		       "legacy program 'compress' is deprecated." >&2
710	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
711	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
712	$(am__post_remove_distdir)
713
714dist-shar: distdir
715	@echo WARNING: "Support for shar distribution archives is" \
716	               "deprecated." >&2
717	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
718	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
719	$(am__post_remove_distdir)
720
721dist-zip: distdir
722	-rm -f $(distdir).zip
723	zip -rq $(distdir).zip $(distdir)
724	$(am__post_remove_distdir)
725
726dist dist-all:
727	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
728	$(am__post_remove_distdir)
729
730# This target untars the dist file and tries a VPATH configuration.  Then
731# it guarantees that the distribution is self-contained by making another
732# tarfile.
733distcheck: dist
734	case '$(DIST_ARCHIVES)' in \
735	*.tar.gz*) \
736	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
737	*.tar.bz2*) \
738	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
739	*.tar.lz*) \
740	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
741	*.tar.xz*) \
742	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
743	*.tar.Z*) \
744	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
745	*.shar.gz*) \
746	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
747	*.zip*) \
748	  unzip $(distdir).zip ;;\
749	esac
750	chmod -R a-w $(distdir)
751	chmod u+w $(distdir)
752	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
753	chmod a-w $(distdir)
754	test -d $(distdir)/_build || exit 0; \
755	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
756	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
757	  && am__cwd=`pwd` \
758	  && $(am__cd) $(distdir)/_build/sub \
759	  && ../../configure \
760	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
761	    $(DISTCHECK_CONFIGURE_FLAGS) \
762	    --srcdir=../.. --prefix="$$dc_install_base" \
763	  && $(MAKE) $(AM_MAKEFLAGS) \
764	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
765	  && $(MAKE) $(AM_MAKEFLAGS) check \
766	  && $(MAKE) $(AM_MAKEFLAGS) install \
767	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
768	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
769	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
770	        distuninstallcheck \
771	  && chmod -R a-w "$$dc_install_base" \
772	  && ({ \
773	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
774	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
775	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
776	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
777	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
778	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
779	  && rm -rf "$$dc_destdir" \
780	  && $(MAKE) $(AM_MAKEFLAGS) dist \
781	  && rm -rf $(DIST_ARCHIVES) \
782	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
783	  && cd "$$am__cwd" \
784	  || exit 1
785	$(am__post_remove_distdir)
786	@(echo "$(distdir) archives ready for distribution: "; \
787	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
788	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
789distuninstallcheck:
790	@test -n '$(distuninstallcheck_dir)' || { \
791	  echo 'ERROR: trying to run $@ with an empty' \
792	       '$$(distuninstallcheck_dir)' >&2; \
793	  exit 1; \
794	}; \
795	$(am__cd) '$(distuninstallcheck_dir)' || { \
796	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
797	  exit 1; \
798	}; \
799	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
800	   || { echo "ERROR: files left after uninstall:" ; \
801	        if test -n "$(DESTDIR)"; then \
802	          echo "  (check DESTDIR support)"; \
803	        fi ; \
804	        $(distuninstallcheck_listfiles) ; \
805	        exit 1; } >&2
806distcleancheck: distclean
807	@if test '$(srcdir)' = . ; then \
808	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
809	  exit 1 ; \
810	fi
811	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
812	  || { echo "ERROR: files left in build directory after distclean:" ; \
813	       $(distcleancheck_listfiles) ; \
814	       exit 1; } >&2
815check-am: all-am
816check: check-recursive
817all-am: Makefile $(PROGRAMS) config.h
818installdirs: installdirs-recursive
819installdirs-am:
820	for dir in "$(DESTDIR)$(bindir)"; do \
821	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
822	done
823install: install-recursive
824install-exec: install-exec-recursive
825install-data: install-data-recursive
826uninstall: uninstall-recursive
827
828install-am: all-am
829	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
830
831installcheck: installcheck-recursive
832install-strip:
833	if test -z '$(STRIP)'; then \
834	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
835	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
836	      install; \
837	else \
838	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
839	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
840	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
841	fi
842mostlyclean-generic:
843
844clean-generic:
845
846distclean-generic:
847	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
848	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
849
850maintainer-clean-generic:
851	@echo "This command is intended for maintainers to use"
852	@echo "it deletes files that may require special tools to rebuild."
853	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
854clean: clean-recursive
855
856clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
857
858distclean: distclean-recursive
859	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
860		-rm -f ./$(DEPDIR)/psgeom.Po
861	-rm -f ./$(DEPDIR)/utils.Po
862	-rm -f ./$(DEPDIR)/xkbprint.Po
863	-rm -f Makefile
864distclean-am: clean-am distclean-compile distclean-generic \
865	distclean-hdr distclean-tags
866
867dvi: dvi-recursive
868
869dvi-am:
870
871html: html-recursive
872
873html-am:
874
875info: info-recursive
876
877info-am:
878
879install-data-am:
880
881install-dvi: install-dvi-recursive
882
883install-dvi-am:
884
885install-exec-am: install-binPROGRAMS
886
887install-html: install-html-recursive
888
889install-html-am:
890
891install-info: install-info-recursive
892
893install-info-am:
894
895install-man:
896
897install-pdf: install-pdf-recursive
898
899install-pdf-am:
900
901install-ps: install-ps-recursive
902
903install-ps-am:
904
905installcheck-am:
906
907maintainer-clean: maintainer-clean-recursive
908	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
909	-rm -rf $(top_srcdir)/autom4te.cache
910		-rm -f ./$(DEPDIR)/psgeom.Po
911	-rm -f ./$(DEPDIR)/utils.Po
912	-rm -f ./$(DEPDIR)/xkbprint.Po
913	-rm -f Makefile
914maintainer-clean-am: distclean-am maintainer-clean-generic
915
916mostlyclean: mostlyclean-recursive
917
918mostlyclean-am: mostlyclean-compile mostlyclean-generic
919
920pdf: pdf-recursive
921
922pdf-am:
923
924ps: ps-recursive
925
926ps-am:
927
928uninstall-am: uninstall-binPROGRAMS
929
930.MAKE: $(am__recursive_targets) all install-am install-strip
931
932.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
933	am--depfiles am--refresh check check-am clean \
934	clean-binPROGRAMS clean-cscope clean-generic cscope \
935	cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
936	dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
937	dist-zip distcheck distclean distclean-compile \
938	distclean-generic distclean-hdr distclean-tags distcleancheck \
939	distdir distuninstallcheck dvi dvi-am html html-am info \
940	info-am install install-am install-binPROGRAMS install-data \
941	install-data-am install-dvi install-dvi-am install-exec \
942	install-exec-am install-html install-html-am install-info \
943	install-info-am install-man install-pdf install-pdf-am \
944	install-ps install-ps-am install-strip installcheck \
945	installcheck-am installdirs installdirs-am maintainer-clean \
946	maintainer-clean-generic mostlyclean mostlyclean-compile \
947	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
948	uninstall-am uninstall-binPROGRAMS
949
950.PRECIOUS: Makefile
951
952
953.PHONY: ChangeLog INSTALL
954
955INSTALL:
956	$(INSTALL_CMD)
957
958ChangeLog:
959	$(CHANGELOG_CMD)
960
961dist-hook: ChangeLog INSTALL
962
963# Tell versions [3.59,3.63) of GNU make to not export all variables.
964# Otherwise a system limit (for SysV at least) may be exceeded.
965.NOEXPORT:
966