Makefile.in revision bfd7cbc1 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18VPATH = @srcdir@
19pkgdatadir = $(datadir)/@PACKAGE@
20pkgincludedir = $(includedir)/@PACKAGE@
21pkglibdir = $(libdir)/@PACKAGE@
22pkglibexecdir = $(libexecdir)/@PACKAGE@
23am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
24install_sh_DATA = $(install_sh) -c -m 644
25install_sh_PROGRAM = $(install_sh) -c
26install_sh_SCRIPT = $(install_sh) -c
27INSTALL_HEADER = $(INSTALL_DATA)
28transform = $(program_transform_name)
29NORMAL_INSTALL = :
30PRE_INSTALL = :
31POST_INSTALL = :
32NORMAL_UNINSTALL = :
33PRE_UNINSTALL = :
34POST_UNINSTALL = :
35subdir = geometry/sgi_vndr
36DIST_COMMON = $(dist_geom_DATA) $(srcdir)/Makefile.am \
37	$(srcdir)/Makefile.in
38ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
39am__aclocal_m4_deps = $(top_srcdir)/configure.in
40am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
41	$(ACLOCAL_M4)
42mkinstalldirs = $(install_sh) -d
43CONFIG_CLEAN_FILES =
44CONFIG_CLEAN_VPATH_FILES =
45SOURCES =
46DIST_SOURCES =
47am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
48am__vpath_adj = case $$p in \
49    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
50    *) f=$$p;; \
51  esac;
52am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
53am__install_max = 40
54am__nobase_strip_setup = \
55  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
56am__nobase_strip = \
57  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
58am__nobase_list = $(am__nobase_strip_setup); \
59  for p in $$list; do echo "$$p $$p"; done | \
60  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
61  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
62    if (++n[$$2] == $(am__install_max)) \
63      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
64    END { for (dir in files) print dir, files[dir] }'
65am__base_list = \
66  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
67  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
68am__installdirs = "$(DESTDIR)$(geomdir)"
69DATA = $(dist_geom_DATA)
70DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
71ACLOCAL = @ACLOCAL@
72ALL_LINGUAS = @ALL_LINGUAS@
73AMTAR = @AMTAR@
74AUTOCONF = @AUTOCONF@
75AUTOHEADER = @AUTOHEADER@
76AUTOMAKE = @AUTOMAKE@
77AWK = @AWK@
78CATALOGS = @CATALOGS@
79CATOBJEXT = @CATOBJEXT@
80CC = @CC@
81CCDEPMODE = @CCDEPMODE@
82CFLAGS = @CFLAGS@
83CPP = @CPP@
84CPPFLAGS = @CPPFLAGS@
85CYGPATH_W = @CYGPATH_W@
86DATADIRNAME = @DATADIRNAME@
87DEFS = @DEFS@
88DEPDIR = @DEPDIR@
89DEPS_CFLAGS = @DEPS_CFLAGS@
90DEPS_LIBS = @DEPS_LIBS@
91ECHO_C = @ECHO_C@
92ECHO_N = @ECHO_N@
93ECHO_T = @ECHO_T@
94EGREP = @EGREP@
95EXEEXT = @EXEEXT@
96GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
97GMOFILES = @GMOFILES@
98GMSGFMT = @GMSGFMT@
99GREP = @GREP@
100INSTALL = @INSTALL@
101INSTALL_DATA = @INSTALL_DATA@
102INSTALL_PROGRAM = @INSTALL_PROGRAM@
103INSTALL_SCRIPT = @INSTALL_SCRIPT@
104INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
105INSTOBJEXT = @INSTOBJEXT@
106INTLLIBS = @INTLLIBS@
107INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
108INTLTOOL_MERGE = @INTLTOOL_MERGE@
109INTLTOOL_PERL = @INTLTOOL_PERL@
110INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
111LDFLAGS = @LDFLAGS@
112LIBOBJS = @LIBOBJS@
113LIBS = @LIBS@
114LTLIBOBJS = @LTLIBOBJS@
115MAINT = @MAINT@
116MAKEINFO = @MAKEINFO@
117MKDIR_P = @MKDIR_P@
118MKINSTALLDIRS = @MKINSTALLDIRS@
119MSGFMT = @MSGFMT@
120MSGFMT_OPTS = @MSGFMT_OPTS@
121MSGMERGE = @MSGMERGE@
122OBJEXT = @OBJEXT@
123PACKAGE = @PACKAGE@
124PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
125PACKAGE_NAME = @PACKAGE_NAME@
126PACKAGE_STRING = @PACKAGE_STRING@
127PACKAGE_TARNAME = @PACKAGE_TARNAME@
128PACKAGE_URL = @PACKAGE_URL@
129PACKAGE_VERSION = @PACKAGE_VERSION@
130PATH_SEPARATOR = @PATH_SEPARATOR@
131PKG_CONFIG = @PKG_CONFIG@
132PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
133PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
134POFILES = @POFILES@
135POSUB = @POSUB@
136PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
137PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
138SET_MAKE = @SET_MAKE@
139SHELL = @SHELL@
140STRIP = @STRIP@
141USE_NLS = @USE_NLS@
142VERSION = @VERSION@
143XGETTEXT = @XGETTEXT@
144XKBCOMP = @XKBCOMP@
145abs_builddir = @abs_builddir@
146abs_srcdir = @abs_srcdir@
147abs_top_builddir = @abs_top_builddir@
148abs_top_srcdir = @abs_top_srcdir@
149ac_ct_CC = @ac_ct_CC@
150am__include = @am__include@
151am__leading_dot = @am__leading_dot@
152am__quote = @am__quote@
153am__tar = @am__tar@
154am__untar = @am__untar@
155bindir = @bindir@
156build_alias = @build_alias@
157builddir = @builddir@
158datadir = @datadir@
159datarootdir = @datarootdir@
160docdir = @docdir@
161dvidir = @dvidir@
162exec_prefix = @exec_prefix@
163host_alias = @host_alias@
164htmldir = @htmldir@
165includedir = @includedir@
166infodir = @infodir@
167install_sh = @install_sh@
168libdir = @libdir@
169libexecdir = @libexecdir@
170localedir = @localedir@
171localstatedir = @localstatedir@
172mandir = @mandir@
173mkdir_p = @mkdir_p@
174oldincludedir = @oldincludedir@
175pdfdir = @pdfdir@
176prefix = @prefix@
177program_transform_name = @program_transform_name@
178psdir = @psdir@
179sbindir = @sbindir@
180sharedstatedir = @sharedstatedir@
181srcdir = @srcdir@
182sysconfdir = @sysconfdir@
183target_alias = @target_alias@
184top_build_prefix = @top_build_prefix@
185top_builddir = @top_builddir@
186top_srcdir = @top_srcdir@
187xkb_base = @xkb_base@
188xkb_rules_symlink = @xkb_rules_symlink@
189geomdir = $(xkb_base)/geometry/sgi_vndr
190dist_geom_DATA = \
191indigo  indy  O2
192
193all: all-am
194
195.SUFFIXES:
196$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
197	@for dep in $?; do \
198	  case '$(am__configure_deps)' in \
199	    *$$dep*) \
200	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
201	        && { if test -f $@; then exit 0; else break; fi; }; \
202	      exit 1;; \
203	  esac; \
204	done; \
205	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign geometry/sgi_vndr/Makefile'; \
206	$(am__cd) $(top_srcdir) && \
207	  $(AUTOMAKE) --foreign geometry/sgi_vndr/Makefile
208.PRECIOUS: Makefile
209Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
210	@case '$?' in \
211	  *config.status*) \
212	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
213	  *) \
214	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
215	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
216	esac;
217
218$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
219	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
220
221$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
222	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
223$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
224	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
225$(am__aclocal_m4_deps):
226install-dist_geomDATA: $(dist_geom_DATA)
227	@$(NORMAL_INSTALL)
228	test -z "$(geomdir)" || $(MKDIR_P) "$(DESTDIR)$(geomdir)"
229	@list='$(dist_geom_DATA)'; test -n "$(geomdir)" || list=; \
230	for p in $$list; do \
231	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
232	  echo "$$d$$p"; \
233	done | $(am__base_list) | \
234	while read files; do \
235	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(geomdir)'"; \
236	  $(INSTALL_DATA) $$files "$(DESTDIR)$(geomdir)" || exit $$?; \
237	done
238
239uninstall-dist_geomDATA:
240	@$(NORMAL_UNINSTALL)
241	@list='$(dist_geom_DATA)'; test -n "$(geomdir)" || list=; \
242	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
243	test -n "$$files" || exit 0; \
244	echo " ( cd '$(DESTDIR)$(geomdir)' && rm -f" $$files ")"; \
245	cd "$(DESTDIR)$(geomdir)" && rm -f $$files
246tags: TAGS
247TAGS:
248
249ctags: CTAGS
250CTAGS:
251
252
253distdir: $(DISTFILES)
254	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
255	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
256	list='$(DISTFILES)'; \
257	  dist_files=`for file in $$list; do echo $$file; done | \
258	  sed -e "s|^$$srcdirstrip/||;t" \
259	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
260	case $$dist_files in \
261	  */*) $(MKDIR_P) `echo "$$dist_files" | \
262			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
263			   sort -u` ;; \
264	esac; \
265	for file in $$dist_files; do \
266	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
267	  if test -d $$d/$$file; then \
268	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
269	    if test -d "$(distdir)/$$file"; then \
270	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
271	    fi; \
272	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
273	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
274	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
275	    fi; \
276	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
277	  else \
278	    test -f "$(distdir)/$$file" \
279	    || cp -p $$d/$$file "$(distdir)/$$file" \
280	    || exit 1; \
281	  fi; \
282	done
283check-am: all-am
284check: check-am
285all-am: Makefile $(DATA)
286installdirs:
287	for dir in "$(DESTDIR)$(geomdir)"; do \
288	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
289	done
290install: install-am
291install-exec: install-exec-am
292install-data: install-data-am
293uninstall: uninstall-am
294
295install-am: all-am
296	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
297
298installcheck: installcheck-am
299install-strip:
300	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
301	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
302	  `test -z '$(STRIP)' || \
303	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
304mostlyclean-generic:
305
306clean-generic:
307
308distclean-generic:
309	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
310	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
311
312maintainer-clean-generic:
313	@echo "This command is intended for maintainers to use"
314	@echo "it deletes files that may require special tools to rebuild."
315clean: clean-am
316
317clean-am: clean-generic mostlyclean-am
318
319distclean: distclean-am
320	-rm -f Makefile
321distclean-am: clean-am distclean-generic
322
323dvi: dvi-am
324
325dvi-am:
326
327html: html-am
328
329html-am:
330
331info: info-am
332
333info-am:
334
335install-data-am: install-dist_geomDATA
336
337install-dvi: install-dvi-am
338
339install-dvi-am:
340
341install-exec-am:
342
343install-html: install-html-am
344
345install-html-am:
346
347install-info: install-info-am
348
349install-info-am:
350
351install-man:
352
353install-pdf: install-pdf-am
354
355install-pdf-am:
356
357install-ps: install-ps-am
358
359install-ps-am:
360
361installcheck-am:
362
363maintainer-clean: maintainer-clean-am
364	-rm -f Makefile
365maintainer-clean-am: distclean-am maintainer-clean-generic
366
367mostlyclean: mostlyclean-am
368
369mostlyclean-am: mostlyclean-generic
370
371pdf: pdf-am
372
373pdf-am:
374
375ps: ps-am
376
377ps-am:
378
379uninstall-am: uninstall-dist_geomDATA
380
381.MAKE: install-am install-strip
382
383.PHONY: all all-am check check-am clean clean-generic distclean \
384	distclean-generic distdir dvi dvi-am html html-am info info-am \
385	install install-am install-data install-data-am \
386	install-dist_geomDATA install-dvi install-dvi-am install-exec \
387	install-exec-am install-html install-html-am install-info \
388	install-info-am install-man install-pdf install-pdf-am \
389	install-ps install-ps-am install-strip installcheck \
390	installcheck-am installdirs maintainer-clean \
391	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
392	pdf-am ps ps-am uninstall uninstall-am uninstall-dist_geomDATA
393
394
395# Tell versions [3.59,3.63) of GNU make to not export all variables.
396# Otherwise a system limit (for SysV at least) may be exceeded.
397.NOEXPORT:
398