Makefile.in revision 80b026c6 
1# Makefile.in generated by automake 1.11.2 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
6# Foundation, Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18# 
19#  Copyright 2005  Red Hat, Inc.
20# 
21#  Permission to use, copy, modify, distribute, and sell this software and its
22#  documentation for any purpose is hereby granted without fee, provided that
23#  the above copyright notice appear in all copies and that both that
24#  copyright notice and this permission notice appear in supporting
25#  documentation, and that the name of Red Hat not be used in
26#  advertising or publicity pertaining to distribution of the software without
27#  specific, written prior permission.  Red Hat makes no
28#  representations about the suitability of this software for any purpose.  It
29#  is provided "as is" without express or implied warranty.
30# 
31#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
32#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
33#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
34#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
35#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
36#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
37#  PERFORMANCE OF THIS SOFTWARE.
38
39
40VPATH = @srcdir@
41pkgdatadir = $(datadir)/@PACKAGE@
42pkgincludedir = $(includedir)/@PACKAGE@
43pkglibdir = $(libdir)/@PACKAGE@
44pkglibexecdir = $(libexecdir)/@PACKAGE@
45am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
46install_sh_DATA = $(install_sh) -c -m 644
47install_sh_PROGRAM = $(install_sh) -c
48install_sh_SCRIPT = $(install_sh) -c
49INSTALL_HEADER = $(INSTALL_DATA)
50transform = $(program_transform_name)
51NORMAL_INSTALL = :
52PRE_INSTALL = :
53POST_INSTALL = :
54NORMAL_UNINSTALL = :
55PRE_UNINSTALL = :
56POST_UNINSTALL = :
57build_triplet = @build@
58host_triplet = @host@
59bin_PROGRAMS = xmag$(EXEEXT)
60subdir = .
61DIST_COMMON = README $(am__configure_deps) $(dist_appdefault_DATA) \
62	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
63	$(srcdir)/config.h.in $(top_srcdir)/configure COPYING \
64	ChangeLog INSTALL config.guess config.sub depcomp install-sh \
65	missing
66ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
67am__aclocal_m4_deps = $(top_srcdir)/configure.ac
68am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
69	$(ACLOCAL_M4)
70am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
71 configure.lineno config.status.lineno
72mkinstalldirs = $(install_sh) -d
73CONFIG_HEADER = config.h
74CONFIG_CLEAN_FILES =
75CONFIG_CLEAN_VPATH_FILES =
76am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)"
77PROGRAMS = $(bin_PROGRAMS)
78am_xmag_OBJECTS = CutPaste.$(OBJEXT) RootWin.$(OBJEXT) Scale.$(OBJEXT) \
79	xmag.$(OBJEXT)
80xmag_OBJECTS = $(am_xmag_OBJECTS)
81am__DEPENDENCIES_1 =
82xmag_DEPENDENCIES = $(am__DEPENDENCIES_1)
83DEFAULT_INCLUDES = -I.@am__isrc@
84depcomp = $(SHELL) $(top_srcdir)/depcomp
85am__depfiles_maybe = depfiles
86am__mv = mv -f
87COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
88	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
89AM_V_CC = $(am__v_CC_$(V))
90am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
91am__v_CC_0 = @echo "  CC    " $@;
92AM_V_at = $(am__v_at_$(V))
93am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
94am__v_at_0 = @
95CCLD = $(CC)
96LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
97AM_V_CCLD = $(am__v_CCLD_$(V))
98am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
99am__v_CCLD_0 = @echo "  CCLD  " $@;
100AM_V_GEN = $(am__v_GEN_$(V))
101am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
102am__v_GEN_0 = @echo "  GEN   " $@;
103SOURCES = $(xmag_SOURCES)
104DIST_SOURCES = $(xmag_SOURCES)
105RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
106	html-recursive info-recursive install-data-recursive \
107	install-dvi-recursive install-exec-recursive \
108	install-html-recursive install-info-recursive \
109	install-pdf-recursive install-ps-recursive install-recursive \
110	installcheck-recursive installdirs-recursive pdf-recursive \
111	ps-recursive uninstall-recursive
112am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
113am__vpath_adj = case $$p in \
114    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
115    *) f=$$p;; \
116  esac;
117am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
118am__install_max = 40
119am__nobase_strip_setup = \
120  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
121am__nobase_strip = \
122  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
123am__nobase_list = $(am__nobase_strip_setup); \
124  for p in $$list; do echo "$$p $$p"; done | \
125  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
126  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
127    if (++n[$$2] == $(am__install_max)) \
128      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
129    END { for (dir in files) print dir, files[dir] }'
130am__base_list = \
131  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
132  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
133am__uninstall_files_from_dir = { \
134  test -z "$$files" \
135    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
136    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
137         $(am__cd) "$$dir" && rm -f $$files; }; \
138  }
139DATA = $(dist_appdefault_DATA)
140RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
141  distclean-recursive maintainer-clean-recursive
142AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
143	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
144	distdir dist dist-all distcheck
145ETAGS = etags
146CTAGS = ctags
147DIST_SUBDIRS = $(SUBDIRS)
148DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
149distdir = $(PACKAGE)-$(VERSION)
150top_distdir = $(distdir)
151am__remove_distdir = \
152  { test ! -d "$(distdir)" \
153    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
154         && rm -fr "$(distdir)"; }; }
155am__relativize = \
156  dir0=`pwd`; \
157  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
158  sed_rest='s,^[^/]*/*,,'; \
159  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
160  sed_butlast='s,/*[^/]*$$,,'; \
161  while test -n "$$dir1"; do \
162    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
163    if test "$$first" != "."; then \
164      if test "$$first" = ".."; then \
165        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
166        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
167      else \
168        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
169        if test "$$first2" = "$$first"; then \
170          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
171        else \
172          dir2="../$$dir2"; \
173        fi; \
174        dir0="$$dir0"/"$$first"; \
175      fi; \
176    fi; \
177    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
178  done; \
179  reldir="$$dir2"
180DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
181GZIP_ENV = --best
182distuninstallcheck_listfiles = find . -type f -print
183am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
184  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
185distcleancheck_listfiles = find . -type f -print
186ACLOCAL = @ACLOCAL@
187ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
188ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
189AMTAR = @AMTAR@
190AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
191APP_MAN_DIR = @APP_MAN_DIR@
192APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
193AUTOCONF = @AUTOCONF@
194AUTOHEADER = @AUTOHEADER@
195AUTOMAKE = @AUTOMAKE@
196AWK = @AWK@
197BASE_CFLAGS = @BASE_CFLAGS@
198CC = @CC@
199CCDEPMODE = @CCDEPMODE@
200CFLAGS = @CFLAGS@
201CHANGELOG_CMD = @CHANGELOG_CMD@
202CPP = @CPP@
203CPPFLAGS = @CPPFLAGS@
204CWARNFLAGS = @CWARNFLAGS@
205CYGPATH_W = @CYGPATH_W@
206DEFS = @DEFS@
207DEPDIR = @DEPDIR@
208DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
209DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
210ECHO_C = @ECHO_C@
211ECHO_N = @ECHO_N@
212ECHO_T = @ECHO_T@
213EGREP = @EGREP@
214EXEEXT = @EXEEXT@
215FILE_MAN_DIR = @FILE_MAN_DIR@
216FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
217GREP = @GREP@
218INSTALL = @INSTALL@
219INSTALL_CMD = @INSTALL_CMD@
220INSTALL_DATA = @INSTALL_DATA@
221INSTALL_PROGRAM = @INSTALL_PROGRAM@
222INSTALL_SCRIPT = @INSTALL_SCRIPT@
223INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
224LDFLAGS = @LDFLAGS@
225LIBOBJS = @LIBOBJS@
226LIBS = @LIBS@
227LIB_MAN_DIR = @LIB_MAN_DIR@
228LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
229LTLIBOBJS = @LTLIBOBJS@
230MAINT = @MAINT@
231MAKEINFO = @MAKEINFO@
232MAN_SUBSTS = @MAN_SUBSTS@
233MISC_MAN_DIR = @MISC_MAN_DIR@
234MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
235MKDIR_P = @MKDIR_P@
236OBJEXT = @OBJEXT@
237PACKAGE = @PACKAGE@
238PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
239PACKAGE_NAME = @PACKAGE_NAME@
240PACKAGE_STRING = @PACKAGE_STRING@
241PACKAGE_TARNAME = @PACKAGE_TARNAME@
242PACKAGE_URL = @PACKAGE_URL@
243PACKAGE_VERSION = @PACKAGE_VERSION@
244PATH_SEPARATOR = @PATH_SEPARATOR@
245PKG_CONFIG = @PKG_CONFIG@
246SED = @SED@
247SET_MAKE = @SET_MAKE@
248SHELL = @SHELL@
249STRICT_CFLAGS = @STRICT_CFLAGS@
250STRIP = @STRIP@
251VERSION = @VERSION@
252XMAG_CFLAGS = @XMAG_CFLAGS@
253XMAG_LIBS = @XMAG_LIBS@
254XORG_MAN_PAGE = @XORG_MAN_PAGE@
255abs_builddir = @abs_builddir@
256abs_srcdir = @abs_srcdir@
257abs_top_builddir = @abs_top_builddir@
258abs_top_srcdir = @abs_top_srcdir@
259ac_ct_CC = @ac_ct_CC@
260am__include = @am__include@
261am__leading_dot = @am__leading_dot@
262am__quote = @am__quote@
263am__tar = @am__tar@
264am__untar = @am__untar@
265appdefaultdir = @appdefaultdir@
266bindir = @bindir@
267build = @build@
268build_alias = @build_alias@
269build_cpu = @build_cpu@
270build_os = @build_os@
271build_vendor = @build_vendor@
272builddir = @builddir@
273datadir = @datadir@
274datarootdir = @datarootdir@
275docdir = @docdir@
276dvidir = @dvidir@
277exec_prefix = @exec_prefix@
278host = @host@
279host_alias = @host_alias@
280host_cpu = @host_cpu@
281host_os = @host_os@
282host_vendor = @host_vendor@
283htmldir = @htmldir@
284includedir = @includedir@
285infodir = @infodir@
286install_sh = @install_sh@
287libdir = @libdir@
288libexecdir = @libexecdir@
289localedir = @localedir@
290localstatedir = @localstatedir@
291mandir = @mandir@
292mkdir_p = @mkdir_p@
293oldincludedir = @oldincludedir@
294pdfdir = @pdfdir@
295prefix = @prefix@
296program_transform_name = @program_transform_name@
297psdir = @psdir@
298sbindir = @sbindir@
299sharedstatedir = @sharedstatedir@
300srcdir = @srcdir@
301sysconfdir = @sysconfdir@
302target_alias = @target_alias@
303top_build_prefix = @top_build_prefix@
304top_builddir = @top_builddir@
305top_srcdir = @top_srcdir@
306SUBDIRS = man
307AM_CFLAGS = $(XMAG_CFLAGS) $(CWARNFLAGS)
308xmag_LDADD = $(XMAG_LIBS)
309xmag_SOURCES = \
310        CutPaste.c \
311        CutPaste.h \
312        RootWin.c \
313        RootWin.h \
314        RootWinP.h \
315        Scale.c \
316        Scale.h \
317        ScaleP.h \
318        xmag.c
319
320
321# App default files  (*.ad)
322DISTCHECK_CONFIGURE_FLAGS = --with-appdefaultdir=\$${datadir}/X11/app-defaults
323dist_appdefault_DATA = \
324        app-defaults/Xmag
325
326
327# Developer documentation for Scale widget in Scale.c
328EXTRA_DIST = Scale.txt xmag.icon
329MAINTAINERCLEANFILES = ChangeLog INSTALL
330all: config.h
331	$(MAKE) $(AM_MAKEFLAGS) all-recursive
332
333.SUFFIXES:
334.SUFFIXES: .c .o .obj
335am--refresh: Makefile
336	@:
337$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
338	@for dep in $?; do \
339	  case '$(am__configure_deps)' in \
340	    *$$dep*) \
341	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
342	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
343		&& exit 0; \
344	      exit 1;; \
345	  esac; \
346	done; \
347	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
348	$(am__cd) $(top_srcdir) && \
349	  $(AUTOMAKE) --foreign Makefile
350.PRECIOUS: Makefile
351Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
352	@case '$?' in \
353	  *config.status*) \
354	    echo ' $(SHELL) ./config.status'; \
355	    $(SHELL) ./config.status;; \
356	  *) \
357	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
358	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
359	esac;
360
361$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
362	$(SHELL) ./config.status --recheck
363
364$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
365	$(am__cd) $(srcdir) && $(AUTOCONF)
366$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
367	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
368$(am__aclocal_m4_deps):
369
370config.h: stamp-h1
371	@if test ! -f $@; then rm -f stamp-h1; else :; fi
372	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
373
374stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
375	@rm -f stamp-h1
376	cd $(top_builddir) && $(SHELL) ./config.status config.h
377$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
378	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
379	rm -f stamp-h1
380	touch $@
381
382distclean-hdr:
383	-rm -f config.h stamp-h1
384install-binPROGRAMS: $(bin_PROGRAMS)
385	@$(NORMAL_INSTALL)
386	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
387	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
388	for p in $$list; do echo "$$p $$p"; done | \
389	sed 's/$(EXEEXT)$$//' | \
390	while read p p1; do if test -f $$p; \
391	  then echo "$$p"; echo "$$p"; else :; fi; \
392	done | \
393	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
394	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
395	sed 'N;N;N;s,\n, ,g' | \
396	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
397	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
398	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
399	    else { print "f", $$3 "/" $$4, $$1; } } \
400	  END { for (d in files) print "f", d, files[d] }' | \
401	while read type dir files; do \
402	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
403	    test -z "$$files" || { \
404	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
405	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
406	    } \
407	; done
408
409uninstall-binPROGRAMS:
410	@$(NORMAL_UNINSTALL)
411	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
412	files=`for p in $$list; do echo "$$p"; done | \
413	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
414	      -e 's/$$/$(EXEEXT)/' `; \
415	test -n "$$list" || exit 0; \
416	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
417	cd "$(DESTDIR)$(bindir)" && rm -f $$files
418
419clean-binPROGRAMS:
420	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
421xmag$(EXEEXT): $(xmag_OBJECTS) $(xmag_DEPENDENCIES) 
422	@rm -f xmag$(EXEEXT)
423	$(AM_V_CCLD)$(LINK) $(xmag_OBJECTS) $(xmag_LDADD) $(LIBS)
424
425mostlyclean-compile:
426	-rm -f *.$(OBJEXT)
427
428distclean-compile:
429	-rm -f *.tab.c
430
431@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/CutPaste.Po@am__quote@
432@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/RootWin.Po@am__quote@
433@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Scale.Po@am__quote@
434@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xmag.Po@am__quote@
435
436.c.o:
437@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
438@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
439@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
440@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
441@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c $<
442
443.c.obj:
444@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
445@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
446@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
447@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
448@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
449install-dist_appdefaultDATA: $(dist_appdefault_DATA)
450	@$(NORMAL_INSTALL)
451	test -z "$(appdefaultdir)" || $(MKDIR_P) "$(DESTDIR)$(appdefaultdir)"
452	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
453	for p in $$list; do \
454	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
455	  echo "$$d$$p"; \
456	done | $(am__base_list) | \
457	while read files; do \
458	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appdefaultdir)'"; \
459	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appdefaultdir)" || exit $$?; \
460	done
461
462uninstall-dist_appdefaultDATA:
463	@$(NORMAL_UNINSTALL)
464	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
465	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
466	dir='$(DESTDIR)$(appdefaultdir)'; $(am__uninstall_files_from_dir)
467
468# This directory's subdirectories are mostly independent; you can cd
469# into them and run `make' without going through this Makefile.
470# To change the values of `make' variables: instead of editing Makefiles,
471# (1) if the variable is set in `config.status', edit `config.status'
472#     (which will cause the Makefiles to be regenerated when you run `make');
473# (2) otherwise, pass the desired values on the `make' command line.
474$(RECURSIVE_TARGETS):
475	@fail= failcom='exit 1'; \
476	for f in x $$MAKEFLAGS; do \
477	  case $$f in \
478	    *=* | --[!k]*);; \
479	    *k*) failcom='fail=yes';; \
480	  esac; \
481	done; \
482	dot_seen=no; \
483	target=`echo $@ | sed s/-recursive//`; \
484	list='$(SUBDIRS)'; for subdir in $$list; do \
485	  echo "Making $$target in $$subdir"; \
486	  if test "$$subdir" = "."; then \
487	    dot_seen=yes; \
488	    local_target="$$target-am"; \
489	  else \
490	    local_target="$$target"; \
491	  fi; \
492	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
493	  || eval $$failcom; \
494	done; \
495	if test "$$dot_seen" = "no"; then \
496	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
497	fi; test -z "$$fail"
498
499$(RECURSIVE_CLEAN_TARGETS):
500	@fail= failcom='exit 1'; \
501	for f in x $$MAKEFLAGS; do \
502	  case $$f in \
503	    *=* | --[!k]*);; \
504	    *k*) failcom='fail=yes';; \
505	  esac; \
506	done; \
507	dot_seen=no; \
508	case "$@" in \
509	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
510	  *) list='$(SUBDIRS)' ;; \
511	esac; \
512	rev=''; for subdir in $$list; do \
513	  if test "$$subdir" = "."; then :; else \
514	    rev="$$subdir $$rev"; \
515	  fi; \
516	done; \
517	rev="$$rev ."; \
518	target=`echo $@ | sed s/-recursive//`; \
519	for subdir in $$rev; do \
520	  echo "Making $$target in $$subdir"; \
521	  if test "$$subdir" = "."; then \
522	    local_target="$$target-am"; \
523	  else \
524	    local_target="$$target"; \
525	  fi; \
526	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
527	  || eval $$failcom; \
528	done && test -z "$$fail"
529tags-recursive:
530	list='$(SUBDIRS)'; for subdir in $$list; do \
531	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
532	done
533ctags-recursive:
534	list='$(SUBDIRS)'; for subdir in $$list; do \
535	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
536	done
537
538ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
539	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
540	unique=`for i in $$list; do \
541	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
542	  done | \
543	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
544	      END { if (nonempty) { for (i in files) print i; }; }'`; \
545	mkid -fID $$unique
546tags: TAGS
547
548TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
549		$(TAGS_FILES) $(LISP)
550	set x; \
551	here=`pwd`; \
552	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
553	  include_option=--etags-include; \
554	  empty_fix=.; \
555	else \
556	  include_option=--include; \
557	  empty_fix=; \
558	fi; \
559	list='$(SUBDIRS)'; for subdir in $$list; do \
560	  if test "$$subdir" = .; then :; else \
561	    test ! -f $$subdir/TAGS || \
562	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
563	  fi; \
564	done; \
565	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
566	unique=`for i in $$list; do \
567	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
568	  done | \
569	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
570	      END { if (nonempty) { for (i in files) print i; }; }'`; \
571	shift; \
572	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
573	  test -n "$$unique" || unique=$$empty_fix; \
574	  if test $$# -gt 0; then \
575	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
576	      "$$@" $$unique; \
577	  else \
578	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
579	      $$unique; \
580	  fi; \
581	fi
582ctags: CTAGS
583CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
584		$(TAGS_FILES) $(LISP)
585	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
586	unique=`for i in $$list; do \
587	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
588	  done | \
589	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
590	      END { if (nonempty) { for (i in files) print i; }; }'`; \
591	test -z "$(CTAGS_ARGS)$$unique" \
592	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
593	     $$unique
594
595GTAGS:
596	here=`$(am__cd) $(top_builddir) && pwd` \
597	  && $(am__cd) $(top_srcdir) \
598	  && gtags -i $(GTAGS_ARGS) "$$here"
599
600distclean-tags:
601	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
602
603distdir: $(DISTFILES)
604	$(am__remove_distdir)
605	test -d "$(distdir)" || mkdir "$(distdir)"
606	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
607	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
608	list='$(DISTFILES)'; \
609	  dist_files=`for file in $$list; do echo $$file; done | \
610	  sed -e "s|^$$srcdirstrip/||;t" \
611	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
612	case $$dist_files in \
613	  */*) $(MKDIR_P) `echo "$$dist_files" | \
614			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
615			   sort -u` ;; \
616	esac; \
617	for file in $$dist_files; do \
618	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
619	  if test -d $$d/$$file; then \
620	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
621	    if test -d "$(distdir)/$$file"; then \
622	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
623	    fi; \
624	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
625	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
626	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
627	    fi; \
628	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
629	  else \
630	    test -f "$(distdir)/$$file" \
631	    || cp -p $$d/$$file "$(distdir)/$$file" \
632	    || exit 1; \
633	  fi; \
634	done
635	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
636	  if test "$$subdir" = .; then :; else \
637	    test -d "$(distdir)/$$subdir" \
638	    || $(MKDIR_P) "$(distdir)/$$subdir" \
639	    || exit 1; \
640	  fi; \
641	done
642	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
643	  if test "$$subdir" = .; then :; else \
644	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
645	    $(am__relativize); \
646	    new_distdir=$$reldir; \
647	    dir1=$$subdir; dir2="$(top_distdir)"; \
648	    $(am__relativize); \
649	    new_top_distdir=$$reldir; \
650	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
651	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
652	    ($(am__cd) $$subdir && \
653	      $(MAKE) $(AM_MAKEFLAGS) \
654	        top_distdir="$$new_top_distdir" \
655	        distdir="$$new_distdir" \
656		am__remove_distdir=: \
657		am__skip_length_check=: \
658		am__skip_mode_fix=: \
659	        distdir) \
660	      || exit 1; \
661	  fi; \
662	done
663	$(MAKE) $(AM_MAKEFLAGS) \
664	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
665	  dist-hook
666	-test -n "$(am__skip_mode_fix)" \
667	|| find "$(distdir)" -type d ! -perm -755 \
668		-exec chmod u+rwx,go+rx {} \; -o \
669	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
670	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
671	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
672	|| chmod -R a+r "$(distdir)"
673dist-gzip: distdir
674	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
675	$(am__remove_distdir)
676dist-bzip2: distdir
677	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
678	$(am__remove_distdir)
679
680dist-lzma: distdir
681	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
682	$(am__remove_distdir)
683
684dist-xz: distdir
685	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
686	$(am__remove_distdir)
687
688dist-tarZ: distdir
689	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
690	$(am__remove_distdir)
691
692dist-shar: distdir
693	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
694	$(am__remove_distdir)
695
696dist-zip: distdir
697	-rm -f $(distdir).zip
698	zip -rq $(distdir).zip $(distdir)
699	$(am__remove_distdir)
700
701dist dist-all: distdir
702	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
703	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
704	$(am__remove_distdir)
705
706# This target untars the dist file and tries a VPATH configuration.  Then
707# it guarantees that the distribution is self-contained by making another
708# tarfile.
709distcheck: dist
710	case '$(DIST_ARCHIVES)' in \
711	*.tar.gz*) \
712	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
713	*.tar.bz2*) \
714	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
715	*.tar.lzma*) \
716	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
717	*.tar.xz*) \
718	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
719	*.tar.Z*) \
720	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
721	*.shar.gz*) \
722	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
723	*.zip*) \
724	  unzip $(distdir).zip ;;\
725	esac
726	chmod -R a-w $(distdir); chmod u+w $(distdir)
727	mkdir $(distdir)/_build
728	mkdir $(distdir)/_inst
729	chmod a-w $(distdir)
730	test -d $(distdir)/_build || exit 0; \
731	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
732	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
733	  && am__cwd=`pwd` \
734	  && $(am__cd) $(distdir)/_build \
735	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
736	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
737	    $(DISTCHECK_CONFIGURE_FLAGS) \
738	  && $(MAKE) $(AM_MAKEFLAGS) \
739	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
740	  && $(MAKE) $(AM_MAKEFLAGS) check \
741	  && $(MAKE) $(AM_MAKEFLAGS) install \
742	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
743	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
744	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
745	        distuninstallcheck \
746	  && chmod -R a-w "$$dc_install_base" \
747	  && ({ \
748	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
749	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
750	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
751	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
752	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
753	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
754	  && rm -rf "$$dc_destdir" \
755	  && $(MAKE) $(AM_MAKEFLAGS) dist \
756	  && rm -rf $(DIST_ARCHIVES) \
757	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
758	  && cd "$$am__cwd" \
759	  || exit 1
760	$(am__remove_distdir)
761	@(echo "$(distdir) archives ready for distribution: "; \
762	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
763	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
764distuninstallcheck:
765	@test -n '$(distuninstallcheck_dir)' || { \
766	  echo 'ERROR: trying to run $@ with an empty' \
767	       '$$(distuninstallcheck_dir)' >&2; \
768	  exit 1; \
769	}; \
770	$(am__cd) '$(distuninstallcheck_dir)' || { \
771	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
772	  exit 1; \
773	}; \
774	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
775	   || { echo "ERROR: files left after uninstall:" ; \
776	        if test -n "$(DESTDIR)"; then \
777	          echo "  (check DESTDIR support)"; \
778	        fi ; \
779	        $(distuninstallcheck_listfiles) ; \
780	        exit 1; } >&2
781distcleancheck: distclean
782	@if test '$(srcdir)' = . ; then \
783	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
784	  exit 1 ; \
785	fi
786	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
787	  || { echo "ERROR: files left in build directory after distclean:" ; \
788	       $(distcleancheck_listfiles) ; \
789	       exit 1; } >&2
790check-am: all-am
791check: check-recursive
792all-am: Makefile $(PROGRAMS) $(DATA) config.h
793installdirs: installdirs-recursive
794installdirs-am:
795	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)"; do \
796	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
797	done
798install: install-recursive
799install-exec: install-exec-recursive
800install-data: install-data-recursive
801uninstall: uninstall-recursive
802
803install-am: all-am
804	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
805
806installcheck: installcheck-recursive
807install-strip:
808	if test -z '$(STRIP)'; then \
809	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
810	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
811	      install; \
812	else \
813	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
814	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
815	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
816	fi
817mostlyclean-generic:
818
819clean-generic:
820
821distclean-generic:
822	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
823	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
824
825maintainer-clean-generic:
826	@echo "This command is intended for maintainers to use"
827	@echo "it deletes files that may require special tools to rebuild."
828	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
829clean: clean-recursive
830
831clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
832
833distclean: distclean-recursive
834	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
835	-rm -rf ./$(DEPDIR)
836	-rm -f Makefile
837distclean-am: clean-am distclean-compile distclean-generic \
838	distclean-hdr distclean-tags
839
840dvi: dvi-recursive
841
842dvi-am:
843
844html: html-recursive
845
846html-am:
847
848info: info-recursive
849
850info-am:
851
852install-data-am: install-dist_appdefaultDATA
853
854install-dvi: install-dvi-recursive
855
856install-dvi-am:
857
858install-exec-am: install-binPROGRAMS
859
860install-html: install-html-recursive
861
862install-html-am:
863
864install-info: install-info-recursive
865
866install-info-am:
867
868install-man:
869
870install-pdf: install-pdf-recursive
871
872install-pdf-am:
873
874install-ps: install-ps-recursive
875
876install-ps-am:
877
878installcheck-am:
879
880maintainer-clean: maintainer-clean-recursive
881	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
882	-rm -rf $(top_srcdir)/autom4te.cache
883	-rm -rf ./$(DEPDIR)
884	-rm -f Makefile
885maintainer-clean-am: distclean-am maintainer-clean-generic
886
887mostlyclean: mostlyclean-recursive
888
889mostlyclean-am: mostlyclean-compile mostlyclean-generic
890
891pdf: pdf-recursive
892
893pdf-am:
894
895ps: ps-recursive
896
897ps-am:
898
899uninstall-am: uninstall-binPROGRAMS uninstall-dist_appdefaultDATA
900
901.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
902	ctags-recursive install-am install-strip tags-recursive
903
904.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
905	all all-am am--refresh check check-am clean clean-binPROGRAMS \
906	clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \
907	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
908	dist-zip distcheck distclean distclean-compile \
909	distclean-generic distclean-hdr distclean-tags distcleancheck \
910	distdir distuninstallcheck dvi dvi-am html html-am info \
911	info-am install install-am install-binPROGRAMS install-data \
912	install-data-am install-dist_appdefaultDATA install-dvi \
913	install-dvi-am install-exec install-exec-am install-html \
914	install-html-am install-info install-info-am install-man \
915	install-pdf install-pdf-am install-ps install-ps-am \
916	install-strip installcheck installcheck-am installdirs \
917	installdirs-am maintainer-clean maintainer-clean-generic \
918	mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
919	ps ps-am tags tags-recursive uninstall uninstall-am \
920	uninstall-binPROGRAMS uninstall-dist_appdefaultDATA
921
922
923.PHONY: ChangeLog INSTALL
924
925INSTALL:
926	$(INSTALL_CMD)
927
928ChangeLog:
929	$(CHANGELOG_CMD)
930
931dist-hook: ChangeLog INSTALL
932
933# Tell versions [3.59,3.63) of GNU make to not export all variables.
934# Otherwise a system limit (for SysV at least) may be exceeded.
935.NOEXPORT:
936