xref: /xsrc/external/mit/xrandr/dist/ChangeLog

commit a06506ca5df0a69e0ca27845855187ff62b78a9d
Author: Julien Cristau <jcristau@debian.org>
Date:   Mon Jul 19 18:07:56 2010 +0100

    Bump to 1.3.3

commit 2cc54b2f6280cc2e5519b572f960ecef36d750ac
Author: Julien Cristau <jcristau@debian.org>
Date:   Mon Jul 19 18:06:56 2010 +0100

    Require xorg-macros 1.4 for XORG_INSTALL

commit 7e6b0adcbd6c9e691b538f99536dcd7106ed1f6a
Author: Julien Cristau <jcristau@debian.org>
Date:   Mon Jul 19 18:05:37 2010 +0100

    Kill cvs keyword

commit 61fc9cc04e1ac179ac5e2cc4ff861bb362f0b801
Author: Eric Piel <eric@triangle.(none)>
Date:   Sun Jan 10 00:08:53 2010 +0100

    xrandr: get gamma and brightness
    
    Even in verbose query mode, gamma and brigthness were not displayed.
    That's because they are not stored in the server the same way they are
    specified on the command line: they are stored as 256 * 3 u16 while
    the command line is 3 + 1 floats.  Still, this is useful info for the
    users, and they don't care about how it's stored in the server.
    
    So we do a regression over the values stored to recover info in the same
    way as on the command line: gamma and brightness.
    
    Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
    Reviewed-By: Matthias Hopf <mhopf@suse.de>

commit b5627bb72b3ca2c7f5a702b7134a5c6dd4f83687
Author: Eric Piel <eric@triangle.(none)>
Date:   Sun Jan 10 00:08:53 2010 +0100

    xrandr: fix maximum gamma set
    
    Gamma is an array of 3 16-bit values. Currently, the maximum value assigned is
    255*256, which is only 65280. Make sure that when we set the gamma, the maximum
    value is 65535. It's slightly brighter but also helps to avoid kludges to
    detect clamped values when reading back the gamma.
    
    Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
    Reviewed-by: Matthias Hopf <mhopf@suse.de>

commit d138c73276226ce424d36e80ce745aa9461f110e
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Thu Feb 11 10:08:07 2010 -0500

    config: move CWARNFLAGS from configure.ac to Makefile.am
    
    Compiler warning flags should be explicitly set in the makefile
    rather than being merged with other packages compiler flags.
    
    Signed-off-by: Gaetan Nadon <memsize@videotron.ca>

commit ac6606d8da914610446c5327813798bfbba4d6c2
Author: Éric Piel <eric.piel@tremplin-utc.net>
Date:   Wed Jan 6 14:42:15 2010 +0100

    xrandr: fix brightness to prevent gamma to overflow and to allow 0
    
    With the new brightness option, gamma would overflow with values > 1,
    leading to rainbow looking screen.
    
    In addition, have the brightness by default to 1, so that specifying 0
    actually does the expected behaviour of leading to a black screen.
    
    Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
    Reviewed-by: Matthias Hopf <mhopf@suse.de>
    Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>

commit ccb3f8a42b25819cd1812f179544b52c2f03d1aa
Author: Yann Droneaud <ydroneaud@mandriva.com>
Date:   Tue Nov 17 15:39:02 2009 +0100

    xrandr: Remove --clone / --extend support code
    
    Code handling --clone and --extend is not used.
    The usage message regarding those options was already commented out.
    
    Signed-off-by: Yann Droneaud <ydroneaud@mandriva.com>
    Acked-by: Matthias Hopf <mhopf@suse.de>

commit 1f8e27cd71560c154f6b1f7472ae2518f5df10e0
Author: Matthias Hopf <mhopf@suse.de>
Date:   Tue Jan 5 14:58:42 2010 +0100

    Language fixes.

commit 5f7d052d63875f059f5693c68ee9fdf559ad5300
Author: Yann Droneaud <ydroneaud@mandriva.com>
Date:   Tue Nov 17 15:39:01 2009 +0100

    xrandr: Use a prefix for enum type _policy and _relation like other enums in xrandr.c
    
    Try to apply the same coding style to enum _policy and enum _relation.
    
    This patch also workarounds bug #12958 .
    
    Signed-off-by: Yann Droneaud <ydroneaud@mandriva.com>
    Acked-by: Matthias Hopf <mhopf@suse.de>

commit b481bd0df87c6b474d8c443b6590bbafac482485
Author: Mikhail Gusarov <dottedmag@dottedmag.net>
Date:   Sun Oct 25 03:41:05 2009 +0600

    Add --brightness for CRTC
    
    --brightness n.m adjusts gamma set for CRTC in order to compensate
    for overly bright or overly dark unmanageable outputs.
    
    Signed-off-by: Matthias Hopf <mhopf@suse.de>

commit 7d463218c584b683c9946cbff44bc69115eaa11b
Author: Matthias Hopf <mhopf@suse.de>
Date:   Sun Jan 3 00:40:19 2010 +0100

    xrandr: add more information about the transform option in the manpage
    
    Add information about the transformation, stating it's a homogeneous
    coordinate transformation and adding the (simplified) pixel calculation
    formula. Also and an example of keystone shaping generated using the algorithm
    found in xkeystone.
    
    Based on a patch by Eric Piel <eric.piel@tremplin-utc.net>
    
    Signed-off-by: Matthias Hopf <mhopf@suse.de>

commit 27f86db064a5ea60b942fd3d3ddeb462d980df9b
Author: Dominik Jasiok <yahoo.com.pl@gmail.com>
Date:   Tue Dec 22 10:48:04 2009 -0800

    xrandr: check_strtod should return double, not int
    
    check_strtod performs error checking around strtod to ensure that
    arguments are correctly processed. However, it also accidentally(?)
    cast the result to int, which was then universally cast back to double
    by all callers. Narrowing and re-widening the type doesn't make any sense.
    
    Signed-off-by: Keith Packard <keithp@keithp.com>

commit df254d851cae1dcd1032e307bc828a5800e7342c
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Thu Nov 26 09:19:54 2009 -0500

    Makefile.am: add ChangeLog and INSTALL on MAINTAINERCLEANFILES
    
    Now that the INSTALL file is generated.
    Allows running make maintainer-clean.

commit 22c90544537e661b71705c59e35616abb5aa4e55
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Wed Oct 28 14:09:08 2009 -0400

    INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206
    
    Add missing INSTALL file. Use standard GNU file on building tarball
    README may have been updated
    Remove AUTHORS file as it is empty and no content available yet.
    Remove NEWS file as it is empty and no content available yet.

commit 35ffd6a8768e16d6fc7bc7c840e35a7802796b21
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Tue Oct 27 15:07:25 2009 -0400

    Deploy the new XORG_DEFAULT_OPTIONS #24242
    
    This macro aggregate a number of existing macros that sets commmon
    X.Org components configuration options. It shields the configuration file from
    future changes.

commit a397f434db4f30e22534b8fe684b8f67f493db40
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Mon Oct 26 22:08:39 2009 -0400

    Makefile.am: ChangeLog not required: EXTRA_DIST or *CLEANFILES #24432
    
    ChangeLog filename is known to Automake and requires no further
    coding in the makefile.

commit 436a873b54990b77ac8024e20284de53c58c7850
Author: Gaetan Nadon <memsize@videotron.ca>
Date:   Thu Oct 22 12:34:16 2009 -0400

    .gitignore: use common defaults with custom section # 24239
    
    Using common defaults will reduce errors and maintenance.
    Only the very small or inexistent custom section need periodic maintenance
    when the structure of the component changes. Do not edit defaults.

commit b81a4976701606d1406ff56b91f13331e5f35860
Author: Yann Droneaud <ydroneaud@mandriva.com>
Date:   Tue Nov 17 10:34:41 2009 +0100

    xrandr: Remove test against RANDR_MAJOR/RANDR_MINOR
    
    xrandr.c uses structures defined in <X11/extensions/Xrandr.h>
    provided by 'libXrandr' package but tests structures availability
    through RANDR_MAJOR/RANDR_MINOR defined in <X11/extensions/randr.h>
    provided by 'randrproto' package.
    
    Sometimes they are not in sync so it's safer to rely on checks made
    by configure script through pkg-config.
    
    In my test case, XRRPanning structure is not defined in Xrandr.h,
    RANDR_MAJOR is 1 and RANDR_MINOR 2 but xrandr.c try to use it anyway.
    (for the record, XRRPanning was added in libXrandr-1.2.91).
    
    Signed-off-by: Yann Droneaud <ydroneaud@mandriva.com>
    Reviewed-by: Rémi Cardona <remi@gentoo.org>

commit b84560759141ed52b8779c184184f888e9be8b2f
Author: Éric Piel <eric.piel@tremplin-utc.net>
Date:   Mon Oct 26 14:11:02 2009 +0100

    xrandr: do not segfault when "--scale" or "--transform" have no output
    
    "xrandr --scale 2x2" segfaults, because the --scale (and --transform)
    options do not check for an existing output.
    
    Make sure there is an output specified (like every other options).
    
    Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
    Signed-off-by: Matthias Hopf <mhopf@suse.de>

commit 34829957441a10f6b6e31141aa1018f7a72aeaf9
Author: Éric Piel <eric.piel@tremplin-utc.net>
Date:   Mon Oct 26 13:57:10 2009 +0100

    xrandr: make --query really the default option
    
    The manpage states that "--query" is the default action when nothing
    specific is requested. However, some options such as "-display" or
    "--screen" lead to do nothing by default. This makes sure that unless
    something specific is requested, query is done.
    
    This also restores the behaviour of --q1 to the same one as the old
    xrandr: also display the info on rotation and reflection by default.
    
    Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
    Signed-off-by: Matthias Hopf <mhopf@suse.de>

commit 07bf47f32b1f4c256e32b5b47ab52ef55605370a
Author: Jeremy Huddleston <jeremyhu@freedesktop.org>
Date:   Wed Oct 21 12:47:21 2009 -0700

    This is not a GNU project, so declare it foreign.
    
    On Wed, 2009-10-21 at 13:36 +1000, Peter Hutterer wrote:
    > On Tue, Oct 20, 2009 at 08:23:55PM -0700, Jeremy Huddleston wrote:
    > > I noticed an INSTALL file in xlsclients and libXvMC today, and it
    > > was quite annoying to work around since 'autoreconf -fvi' replaces
    > > it and git wants to commit it.  Should these files even be in git?
    > > Can I nuke them for the betterment of humanity and since they get
    > > created by autoreconf anyways?
    >
    > See https://bugs.freedesktop.org/show_bug.cgi?id=24206
    
    As an interim measure, replace AM_INIT_AUTOMAKE([dist-bzip2]) with
    AM_INIT_AUTOMAKE([foreign dist-bzip2]). This will prevent the generation
    of the INSTALL file. It is also part of the 24206 solution.
    
    Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>

commit 8d2702cae3b6a78cfd8d480dfb8209091917af2a
Author: Alan Coopersmith <alan.coopersmith@sun.com>
Date:   Thu Oct 1 14:54:29 2009 -0700

    Add README with pointers to mailing lists, bugzilla, & git
    
    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>

commit 5da0cb3533aa829588b2e6d715d511691fa1e45f
Author: Matthias Hopf <mhopf@suse.de>
Date:   Thu Sep 10 13:18:35 2009 +0200

    Bump to 1.3.2

commit e5861530a6c3bb6219217e5f3ddc71f13b9509c4
Author: Matthias Hopf <mhopf@suse.de>
Date:   Thu Sep 10 13:17:56 2009 +0200

    Add missing 'static's to get rid of warnings.

commit ab875be43651befa654a24719f1ea365dde09073
Author: Bart Massey <bart@cs.pdx.edu>
Date:   Thu Feb 7 14:03:24 2008 -0800

    changed a bunch of string to number conversions for reliability

commit 25325aae2e80cb33af17682a6cd1bcd292a5f445
Author: Bart Massey <bart@cs.pdx.edu>
Date:   Fri Sep 4 15:36:51 2009 +0200

    Warn if one of the outputs given did not exist

commit 713a8ea5646f7c893b52afeb3c2443b21b837e46
Author: Matthias Hopf <mhopf@suse.de>
Date:   Tue Aug 11 16:11:39 2009 +0200

    Bump to 1.3.1
    
    Also finally bump xrandr requirement to 1.3

commit b9166441bdb08ef76b9c6712da5902b0dcbf03f3
Author: Federico Mena Quintero <federico@novell.com>
Date:   Mon Jul 20 16:44:52 2009 -0500

    bfo#22864 - grab the server around all modifications to CRTCs
    
    We were not grabbed while disabling the CRTCs that should be off, so other clients could think
    that there was an intermediate stage with no enabled outputs.
    
    Signed-off-by: Federico Mena Quintero <federico@novell.com>

commit 68d5134142e3c616f3996c7ea8d08c887ce56118
Author: Éric Piel <E.A.B.Piel@tudelft.nl>
Date:   Tue Jul 14 21:36:32 2009 +0200

    xrandr: Document --nograb option
    
    Op 08-07-09 15:19, Matthias Hopf schreef:
    > On Jul 07, 09 22:02:51 +0200, Éric Piel wrote:
    >> Op 21-05-09 13:23, Éric Piel schreef:
    >>> This documents the --nograb option with whichever I could understand of
    >>> the advantages and drawbacks of grabbing the screen.
    >>>
    >>> Also fixes the formatting in the xrandr 1.3 options.
    >> Please review and apply.
    >
    > Please resend as attachment.
    >
    Please find attached the git patch.
    
    Thanks,
    Eric
    
    >From 34e7c1036ba0e0d7827563deaffea9371031fa0b Mon Sep 17 00:00:00 2001
    From: Eric Piel <eric.piel@tremplin-utc.net>
    Date: Thu, 21 May 2009 13:01:52 +0200
    Subject: [PATCH] xrandr: Document --nograb option
    
    This documents the --nograb option with whichever I could understand of
    the advantages and drawback of grabbing the screen.
    
    Also fixes the formatting in the xrandr 1.3 options

commit 73e38a31e5b7c68f8f3227a47d98ec55097999c7
Author: Matthias Hopf <mhopf@suse.de>
Date:   Mon Jul 6 18:30:05 2009 +0200

    Fix missing prototype warning.

commit 3408ca77af6a45b15b89bdd1ce9d5aac9646f6b8
Author: Matthias Hopf <mhopf@suse.de>
Date:   Mon Jul 6 18:28:23 2009 +0200

    Report program version as well with --version.
    
    This has bitten us too often already (the infamous uncloning bug).

commit 47502f66f7c51ad575d63f28de49f285c4de7062
Author: Adam Jackson <ajax@redhat.com>
Date:   Wed Apr 1 11:03:10 2009 -0400

    xrandr 1.3.0

commit beb228842c77fab4a446e028dd501a01f0fb3fd3
Author: Adam Jackson <ajax@redhat.com>
Date:   Tue Feb 17 13:45:32 2009 -0500

    Allow zero replies from GetPanning to mean panning is unavailable.

commit 9418f5523bd923b122f6e67c33c40e0e9c29ab50
Author: Aaron Plattner <aplattner@nvidia.com>
Date:   Wed Mar 4 15:49:10 2009 -0800

    Set the screen config on the correct screen.
    
    Otherwise, "DISPLAY=:0.0 xrandr --screen 1 -s 1" fails.

commit 39a16783a3d1c0c722b4b18fab60a91b9f6ed578
Author: Matthias Hopf <mhopf@suse.de>
Date:   Fri Mar 6 14:49:43 2009 +0100

    Revert "Move outputs among crtcs as necessary. Fixes 14570"
    
    This reverts commit 4dcc8ae1a6903434def1a2706f7c68ff9e2a17c4.
    The commit broke uncloning completely again.
    
    Conflicts:
    
    	xrandr.c

commit 880f045202d1e70368b855c3783604e19be946b8
Author: Julien Cristau <jcristau@debian.org>
Date:   Sun Feb 1 14:39:30 2009 +0100

    Bump to 1.2.99.4

commit 010dfc4bdd309256aecd006bb2b5b6937c2a119c
Author: Julien Cristau <jcristau@debian.org>
Date:   Sun Feb 1 14:34:15 2009 +0100

    Document the --primary and --noprimary options

commit 48014498d275a9aab986b4bf295538a5b38ddfeb
Author: Julien Cristau <jcristau@debian.org>
Date:   Sun Feb 1 14:12:21 2009 +0100

    Document the --current option

commit 909defc8a2b009ab845d875ba10e1ca01fb9d648
Author: Keith Packard <keithp@keithp.com>
Date:   Fri Jan 30 20:37:34 2009 -0800

    Add --noprimary option

commit 6c70e0ee693ea293e8674d049249b462f3d36855
Author: Keith Packard <keithp@keithp.com>
Date:   Fri Jan 30 20:11:10 2009 -0800

    Add --primary option
    
    Signed-off-by: Keith Packard <keithp@keithp.com>

commit 77891e7900765a320ad3d43b56bbb1f3081b6582
Author: Keith Packard <keithp@keithp.com>
Date:   Fri Jan 30 20:11:02 2009 -0800

    Add --nograb option
    
    Signed-off-by: Keith Packard <keithp@keithp.com>

commit 6f3e2bb207cff069791811ef2bbe7798759ed810
Author: Keith Packard <keithp@keithp.com>
Date:   Tue Dec 9 21:26:50 2008 -0800

    Add --current option to use new XRRGetScreenResourcesCurrent API
    
    Signed-off-by: Keith Packard <keithp@keithp.com>

commit d98d1f4055d8fbae1dc8d8c54467bfef21010694
Author: Matthias Hopf <mhopf@suse.de>
Date:   Fri Jan 30 17:46:05 2009 +0100

    Several fatal() were missing \n.

commit 9ea6e4210d49c13991a7d07e54f6f59e3dc8ce72
Author: Éric Piel <E.A.B.Piel@tudelft.nl>
Date:   Mon Jan 19 16:18:46 2009 +0100

    Add docs for --transform and --scale.
    
    The new --transform and --scale options were added, but not yet
    documented. This includes also an example of usage of panning and
    scaling at the same time.

commit 4d381d6a88fe147f8b6eabd765a2f42c6402d8c6
Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br>
Date:   Mon Jan 26 16:40:59 2009 -0200

    Correct make distcheck and gcc/sparse warnings.

commit 7509ecb290689e0b1d5e1000c9fbd312f1efb4ca
Author: Maarten Maathuis <madman2003@gmail.com>
Date:   Mon Jan 5 19:47:21 2009 +0100

    Stay away from doublescan modes unless a refresh rate is specified.

commit f77ad847c0d3f8f0c6e8ffbf0bec39e5e9c5ded0
Author: Maarten Maathuis <madman2003@gmail.com>
Date:   Mon Dec 22 19:46:24 2008 +0100

    Fix gamma computation.
    
    - The previous version sometimes overflowed.

commit 5ddde7151841a8db99a2f38689a176114b2a45e5
Author: Matthias Hopf <mhopf@suse.de>
Date:   Thu Dec 18 16:09:39 2008 +0100

    Print multiple Atom and INT32 properties.
    
    Improve output formating of strings.

commit 96af64f0de71f4149740b486baaefca744bb1bc1
Author: Maarten Maathuis <madman2003@gmail.com>
Date:   Wed Dec 17 17:18:14 2008 +0100

    randr-1.2: support gamma changes.

commit 9b7a2a3d4ac7891bd5372a581e6a55a1c81497ef
Author: Matthias Hopf <mhopf@suse.de>
Date:   Mon Dec 15 20:39:43 2008 +0100

    Bump to 1.2.99.3

commit e80add8a407a9327bda209ff11a97dc3336e0cab
Author: Matthias Hopf <mhopf@suse.de>
Date:   Mon Dec 15 21:00:55 2008 +0100

    Add keystone.5c to EXTRA_DIST

commit c98591b0bf4753c4c075eccde6023ef644f8bf96
Author: Matthias Hopf <mhopf@suse.de>
Date:   Mon Dec 15 20:36:40 2008 +0100

    Don't trash panning area, except if --panning or --fb is given.
    
    Almost anything used to reduce the screen size to the current mode size, which
    is counter-productive when panning is active.

commit 8cb63b6df9e46e8b06a57cb54ad460355b604399
Author: Matthias Hopf <mhopf@suse.de>
Date:   Thu Dec 11 17:09:47 2008 +0100

    Panning tracking areas describe full screen if set to 0. Use it as default.
    
    Also improve reduced output on default tracking and borders.

commit b5efbb31ec7c27895507add4497dbfc87f930bb3
Author: Adam Jackson <ajax@redhat.com>
Date:   Mon Dec 8 16:37:59 2008 -0500

    Accept --props synonym for --prop

commit 57cabac91099a8abd5afad75de64e54930c078ec
Author: Matthias Hopf <mhopf@suse.de>
Date:   Mon Dec 8 12:24:37 2008 +0100

    Only set transforms if actually changed.
    
    Re-enables other crtc settings if transforms are not supported.

commit 970f689651fc86fa7a2ba24f0fab5f86f01af349
Author: Matthias Hopf <mhopf@suse.de>
Date:   Thu Dec 4 17:47:05 2008 +0100

    Add manpage entry.

commit d030ae78e8516b916e9ea1ea81e3b4859bf35875
Author: Matthias Hopf <mhopf@suse.de>
Date:   Thu Dec 4 15:57:22 2008 +0100

    Bump to 1.2.99.2, RandR requirements to 1.2.99.2

commit f6b5862f87ba7e1729c46136ef7754a06301853f
Author: Matthias Hopf <mhopf@suse.de>
Date:   Fri Nov 28 17:16:11 2008 +0100

    Add panning support.

commit 1dc67ca918446cb7db4819f60f36e7bc6f4c047b
Author: Matthieu Herrb <matthieu.herrb@laas.fr>
Date:   Sat Dec 6 11:40:53 2008 +0100

    Don't use GNU make only constructs.

commit 7963d4217c12d2e4b0c38ad4ff185462784609f7
Author: Julien Cristau <jcristau@debian.org>
Date:   Mon Dec 1 23:27:51 2008 +0100

    Require libXrandr 1.2.91

commit ba78e14c8c43a141fc5227e7bb75d6cfd0f70dba
Author: Julien Cristau <jcristau@debian.org>
Date:   Mon Dec 1 21:45:47 2008 +0100

    Fix build outside of the source dir

commit 63ba316bcbe8ad61ba63d9fe62c82e7d56dcc399
Merge: a813c4d 1b95e32
Author: Julien Cristau <jcristau@debian.org>
Date:   Mon Dec 1 21:33:35 2008 +0100

    Merge branch 'transform-proposal' of git.freedesktop.org:/git/xorg/app/xrandr

commit 1b95e32b4b0a4a114e0fbebe8a18316d2f9010cf
Author: Keith Packard <keithp@keithp.com>
Date:   Fri Nov 14 14:14:24 2008 -0800

    Add --scale and --transform to --help output

commit e9a5d1c598cd0440f062240430a9b86b4d514ada
Author: Keith Packard <keithp@keithp.com>
Date:   Fri Nov 14 14:13:51 2008 -0800

    Check return value from XRRGetCrtcTransform
    
    XRRGetCrtcTransform will return 0 if the X server does not support this
    request.

commit a813c4da7f0b166ee9001fa97c5d8d64e5b5b560
Author: Alan Coopersmith <alan.coopersmith@sun.com>
Date:   Tue Aug 19 09:39:00 2008 -0700

    Man page typo fix

commit 8ef4595aef15b7326822849a50c273f2a2b4ba30
Author: Julien Cristau <jcristau@debian.org>
Date:   Fri Aug 15 21:23:13 2008 +0200

    Manpage typo fixes

commit 977275a13be0687efc3db1fd3763174ff1256210
Author: Eric Piel <E.A.B.Piel@tudelft.nl>
Date:   Sun Aug 10 23:28:25 2008 +0200

    update the manpage
    
    Describe all the options supported, including: --dryrun, -display,
    --q1, --q12, and --rate for 1.1
    Describe all short and long version of the option.
    Use the usual man style for the option arugments.
    Move the four --*mode options out of the output section as they are
    independant of an output.
    Mention cvt for computing modelines.
    Gives some examples.

commit 3046799a06ecb79211ef0f4a2db9de4eec7233fb
Author: Egbert Eich <eich@freedesktop.org>
Date:   Sun Aug 3 13:24:49 2008 +0200

    Fix for 64bit: feed a pointer to the right size variable to scanf().
    
    XID is unsigned long, however %x in scanf takes a pointer to an unsigned int.
    Thus with XID xid, a sscanf(..., "0x%x", &xid) will most likely produce the
    wrong results.

commit 0d2082e9eb25cb7410309eed908b7f95abb8da79
Author: Keith Packard <keithp@keithp.com>
Date:   Tue Apr 1 23:46:02 2008 -0700

    Exit when select output is not available

commit 18a189993b3df8bc54a79e0d62240ef203d6f34f
Author: Keith Packard <keithp@keithp.com>
Date:   Tue Apr 1 23:44:50 2008 -0700

    Fix up xkeystone to use current screen/output settings

commit 9e8860f9231926090462ea20132cc9e1d64e5fe4
Author: Keith Packard <keithp@keithp.com>
Date:   Sun Mar 30 19:03:53 2008 -0700

    Execute xrandr to set keystone correction

commit 206bfbea4ebe854fdfa66e8a6fbd9296b6004c0e
Author: Keith Packard <keithp@keithp.com>
Date:   Sun Mar 30 19:03:29 2008 -0700

    add --transform none to reset to identity

commit 443e1f80c885133ae6df590f1a7663833c76b7f3
Author: Keith Packard <keithp@keithp.com>
Date:   Fri Mar 21 23:29:41 2008 -0700

    Build and install xkeystone program from keystone.5c

commit a7a7eea510b5a87c1e12516fadae4d13bd26e0a0
Author: Keith Packard <keithp@keithp.com>
Date:   Fri Mar 21 23:26:30 2008 -0700

    Track toolkit name change (chrome->nichrome)

commit 74dae9d4b06369a1863e7a68b7b3772751e06ff1
Author: Keith Packard <keithp@keithp.com>
Date:   Fri Mar 21 03:17:44 2008 -0700

    Add keystone.5c program to help compute transforms.

commit 46bd35dd9004c0f9f47dc44b77a8c28e3ab7ced1
Author: Keith Packard <keithp@keithp.com>
Date:   Fri Mar 21 03:17:40 2008 -0700

    Make screen undersize a warning instead of an error

commit b816bf38b418618c2f1cb5ded09aa3b346f8eb15
Author: Keith Packard <keithp@keithp.com>
Date:   Tue Mar 18 16:04:34 2008 -0700

    Add --transform to pass arbitrary transforms to the server

commit 3809884530223e32f7026ec987257cb91e2122a9
Author: Keith Packard <keithp@keithp.com>
Date:   Tue Mar 18 16:04:22 2008 -0700

    Eliminate inverse matrix from randr transform protocol
    
    It is easier, and potentially more precise, to compute the inverse in the
    server where everything can eventually be kept in floating point form.

commit 854a7c2916455fec5ec1ba87576e26706d151381
Author: Keith Packard <keithp@keithp.com>
Date:   Mon Mar 17 13:59:40 2008 -0700

    Transform mode bounds when computing sizes.
    
    Ensure screen sizes are compared with projected mode image, including
    rotation and transformation.

commit bed3da4feaa505a5b50a4c94b0e6661bdac1fcbd
Author: Keith Packard <keithp@keithp.com>
Date:   Sat Mar 15 00:35:08 2008 -0700

    Manage transform filters. Use bilinear for non-identity scale.
    
    This involved creating a compound transform datatype to hold all of the
    relevant transform and filter information. Adding arbitrary transforms
    should be fairly easy at this point.

commit ba35bb5d306f4edf9a47b92f249132a0814f5db1
Author: Keith Packard <keithp@keithp.com>
Date:   Mon Mar 10 21:19:41 2008 -0700

    Add output scaling using the 1.3 transform requests

commit 4dcc8ae1a6903434def1a2706f7c68ff9e2a17c4
Author: Hong Liu <hong.liu@intel.com>
Date:   Mon Mar 10 21:37:09 2008 -0700

    Move outputs among crtcs as necessary. Fixes 14570
    
    This patch makes new requests override existing crtc allocations. Outputs
    with restricted crtc usage can now force existing outputs to switch
    automatcially.

commit 7465357396e2f32325791e27f28cbbe9753db3ab
Author: Adam Jackson <ajax@redhat.com>
Date:   Fri Mar 7 16:38:28 2008 -0500

    xrandr 1.2.3

commit 4450756d2d1d86f3c0bfaef81f6265f795468f32
Author: Brice Goglin <bgoglin@debian.org>
Date:   Sat Dec 15 00:59:00 2007 +0100

    Clarify the ability to manipulate multiple outputs in the manpage

commit 5c2a003adab4aaa979a095e18793b01cfa694bf4
Author: Brice Goglin <bgoglin@debian.org>
Date:   Sat Dec 15 00:49:35 2007 +0100

    Allow the same output to be specified several times on the command line
    
    Without this
      xrandr --output FOO --mode 1024x768 --output FOO --rotate left
    only changed the mode but did not apply the rotation.
    
    Reported by Marc Haber in
      http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=455225

commit ab5e07fdd10f6340289b786414804a034ca98f0b
Author: Matthias Hopf <mhopf@suse.de>
Date:   Fri Nov 30 16:13:51 2007 +0100

    Add another test known to fail.

commit 4bc84c331f4f0f0658ad1f6c0107e3e6af2a7911
Author: Matthias Hopf <mhopf@suse.de>
Date:   Thu Nov 29 19:54:34 2007 +0100

    Add informational output for known issues.

commit 3fb533ff896bd642200e7242c4d35a887faeca74
Author: Matthias Hopf <mhopf@suse.de>
Date:   Thu Nov 29 19:54:03 2007 +0100

    Add more tests, mostly regarding crtc switching and uncloning.

commit 20c8a60950cb5b4ddef305dc9822bec1c33e938c
Author: Matthias Hopf <mhopf@suse.de>
Date:   Wed Nov 21 16:48:23 2007 +0100

    Oops. Fix missing space introduced by last commit.

commit 3347c849462b737a873a279c24d17c873667c821
Author: Matthias Hopf <mhopf@suse.de>
Date:   Wed Nov 21 16:47:08 2007 +0100

    Be more robust in test case if mode database is borked.
    
    If modes are reported multiple times per output only bother for the last.

commit 81e8f2f5673befded3320424f4511e322d41c80b
Author: Matthias Hopf <mhopf@suse.de>
Date:   Wed Nov 21 16:41:33 2007 +0100

    Some minor issues in test case fixed.
    
    'my' not being used correctly.
    Some lines of xrandr --verbose output missing in failure case.
    If order of outputs change in xrandr -q output they are sorted into original
    order now.

commit 3a27185879e7a9288de960ccb26a48104cf592e3
Author: Matthias Hopf <mhopf@suse.de>
Date:   Tue Nov 20 13:03:07 2007 +0100

    More tests for ambiguous xrandr output.

commit c9bd9721e162e4d9d83dd60400c75d4cc98090bd
Author: Matthias Hopf <mhopf@suse.de>
Date:   Mon Nov 19 20:06:39 2007 +0100

    Use IDs for mode selection instead of hand-crafted <w>x<h>@<r> strings.
    
    Some machines provide e.g. multiple 1024x768@60 modes with /slightly/
    different timings. Often only one of them can be used on multiple outputs.

commit a05d2b6e3ffd81ecc0be98b8d2b758505fb55f3f
Author: Matthias Hopf <mhopf@suse.de>
Date:   Mon Nov 19 12:24:04 2007 +0100

    Improved test script.
    
    Allow for outputs in "unknown" state.
    Check xrandr return value.
    Output full xrandr --verbose output if test failed.

commit e15a527b6cf1e66709eae4547c8e8bd3402362fe
Author: Matthias Hopf <mhopf@suse.de>
Date:   Mon Nov 12 15:25:44 2007 +0100

    Add xrandr test suite.
    
    At the moment it only tests setting one output at a time, it should be
    improved to add some multi-output setting as well.  Also it only tests clone
    modes at the moment, no multi-monitor setups.

commit f7aaf8947a0f216ffedc7040b0a1ef153b471425
Author: Matthias Hopf <mhopf@suse.de>
Date:   Mon Nov 12 15:19:52 2007 +0100

    Always reset other outputs using the best crtc.
    
    pick_crtcs_score() didn't set up crtcs references correctly if anything but
    the last output resulted in the best score.

commit 307f3686d3d517cb29b8e66d8ad2ff76a48748b7
Author: Matthias Hopf <mhopf@suse.de>
Date:   Mon Nov 12 15:18:30 2007 +0100

    Verify crtc against previous config.
    
    When selecting a crtc for an output, it doesn't check for already attached
    outputs in check_crtc_for_output(), and so may select an crtc that is already
    in use.
    E.g. when changing from a cloned mode the displays won't be split up to
    different crtcs, but the same crtc will be used, changing the resolution for
    the unspecified display as well.

commit 4834439ce62e41204367cf5356a7a1719870791f
Author: Matthias Hopf <mhopf@suse.de>
Date:   Thu Oct 11 16:54:40 2007 +0200

    Build ChangeLog from git-log automatically.

commit 2fa28afb035cf2d2efb077db58d3858c57189be4
Author: Adam Jackson <ajax@benzedrine.nwnk.net>
Date:   Tue Oct 2 11:06:18 2007 -0400

    Death to ChangeLog

commit 0cfaad401711092f8858cdec64e4d4f33023f398
Author: Adam Jackson <ajax@benzedrine.nwnk.net>
Date:   Tue Oct 2 11:06:02 2007 -0400

    Update COPYING

commit 06d7272d845033fe3c6f0625cce5a32e7be636a7
Author: Brice Goglin <bgoglin@debian.org>
Date:   Thu Aug 9 19:06:37 2007 +0200

    When invoked with no option, xrandr dumps existing modes

commit b9b2fbbf7a7dd156d1fdffac2e4a4046f58baabb
Author: Brice Goglin <bgoglin@debian.org>
Date:   Thu Aug 9 19:04:58 2007 +0200

    Add *current and +preferred to the --verbose output

commit 200491c1fad5ea1a733dfbac799a2ebea0a2f23c
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Wed Jul 4 20:05:03 2007 -0700

    Bump to 1.2.2

commit 9db36331a2acafbf2dab05f481ce16ab094fde52
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Wed Jul 4 20:04:29 2007 -0700

    Print out mode flags in --verbose mode

commit 49058de9b743f5196f97fb13cd9a695087b1299c
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Wed Jul 4 19:41:32 2007 -0700

    Mark 1.1 options as inconsistent with 1.2 options

commit c58e79a9c4c3967fb31a49a610a37b5797426415
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Thu Jun 21 15:57:37 2007 +0100

    Document 1.2.1 options

commit 0499ce5ed6378bc68cbf8eafc9932ddf495ae708
Author: Keith Packard <keithp@dulcimer.keithp.com>
Date:   Sat Jun 30 14:00:30 2007 -0700

    When simple CRTC allocation fails, search all available configs.
    
    When enabling an output, if there isn't an idle CRTC available, try to
    reconfigure existing outputs to make things work.

commit 0f2014e67193eb0f8e12ab1c3d5cae8991ba439d
Author: Keith Packard <keithp@dulcimer.keithp.com>
Date:   Sat Jun 30 13:09:45 2007 -0700

    Clean up code structure a bit

commit 63d385f2c24c522d974652da138a83d78014713e
Author: Alan Coopersmith <alan.coopersmith@sun.com>
Date:   Thu Jun 21 09:35:53 2007 -0700

    Add *~ to .gitignore to skip emacs & patch droppings

commit 4bd2f4004a6f75a7e4cb32b9e320e680f8839748
Author: Alan Coopersmith <alan.coopersmith@sun.com>
Date:   Thu Jun 21 09:34:53 2007 -0700

    Man page formatting and typo fixes

commit b0812f8efe448c85979a9f5fab4a5a4e0c0e78d0
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Thu Jun 21 11:37:56 2007 +0100

    Update to version 1.2.1

commit 739f01957c8ebd3b7bcecfd7ad8174884561f7db
Author: Aaron Plattner <aplattner@nvidia.com>
Date:   Wed Apr 25 11:59:48 2007 -0700

    Fix bugs found by compiling with -Wall.
    
    Also fix some unused variable warnings.

commit 8e43df335679c71930465e4c58c0bd14d9add29a
Author: Aaron Plattner <aplattner@nvidia.com>
Date:   Wed Apr 25 10:52:19 2007 -0700

    Fix a typo.  Make mode flags case insensitive.  Improve error messages.

commit 49aab1e0e4cb2226d5bcc8e4e6217309fd23ce52
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Fri Apr 6 03:36:27 2007 -0700

    Skip relative positions for outputs without modes.
    
    An output without a mode is turned off; do not try to position it.

commit 86d9b15cccc4d21ad5e5d34d7e7b82a50903939b
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Sun Mar 25 23:44:01 2007 -0700

    Support XA_ATOM properties (like TV_FORMAT).
    
    Atom properties have lists of valid values that are all atoms, so display
    those. Also, fetch property data and use that to determine which format new
    property values are supposed to be in.

commit dba14af8328eaaad716d1c27a5514df285d8d4cc
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Fri Mar 23 01:21:21 2007 -0700

    Add --set option to set output properties.
    
    Numeric values are set as XA_INTEGER format 32 values, everything else is
    set as an XA_STRING format 8 value.

commit ca7a5bb5691ecd1d8da6def373c793aa7a07dbbe
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Thu Mar 15 20:57:17 2007 -0700

    Bounds check -s <index> argument to be 0 <= index < nsize
    
    Print a nice error message when the -s option is passed a number out of
    bounds.

commit 0cbbc7804781c2e55899ba9271365735c4a2b544
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Thu Mar 15 20:56:15 2007 -0700

    Make --q1 output RandR 1.1 query information.
    
    --q1 required a --query option to actually output any information.

commit 7ae11b66cc26395d34070013e23813db3ca3e55f
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Thu Mar 15 20:55:30 2007 -0700

    Make --auto after --output only affect the output.
    
    --auto has two meanings; if presented before any --output flags, it requests
    that connected-but-disabled outputs be enable while disconnected-but-enabled
    outputs be disabled. After --output, --auto simply asks that the mode used
    for the output be automatically selected. Mixing these two operations is not
    a good default.

commit a53cc9b37c40dca936037a89013253f37c9a05ee
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Mon Mar 12 22:47:39 2007 -0700

    Add --addmode and --delmode commands to edit list of modes per output.
    
    --addmode <output> <mode> inserts <mode> into the list supported by
    <output>, while --delmode removes a mode.

commit dca4bd66b166b64314993aba34a3080c6953ac12
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Mon Feb 19 17:12:24 2007 -0800

    Add --newmode/--rmmode to create/destroy user modes.
    
    The syntax may be a bit hard to work with, but these serve to test the
    server infrastructure for custom modes.

commit 9fd6aa1445a8f1e721ba8cdcd1ac12375d6e5a26
Author: Tilman Sauerbeck <tilman@code-monkey.de>
Date:   Fri Mar 9 10:12:17 2007 +0100

    Fixed alignment of the clones list.

commit 3c44d68d78d8bddf69b5bd1a00f854d8cde971bb
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Wed Feb 21 11:24:35 2007 -0800

    Add --same-as option to match output positions.
    
    This provides another positioning option that makes two outputs appear at
    the same location.

commit 8a0c3b748b0e94c97fbc2a7449c6740b8acfe394
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Sun Feb 18 21:27:55 2007 -0800

    Update version number to 1.2.0 for release.

commit 13cef2baa884039e96f5dfd9245bb949aed99448
Merge: 065f09c a175972
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Sun Feb 18 21:26:50 2007 -0800

    Merge branch 'origin'

commit 065f09cc304d0c70eaf3cf6f3ff21e712e41d205
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Sun Feb 18 21:25:54 2007 -0800

    Require only libXrandr 1.2.0, not 1.2.0.0.
    
    Four digits seems excessive in a library version number.

commit a175972de6fbe5426fb5c6bee03112678f0a9548
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Thu Feb 15 23:07:34 2007 -0800

    Select crtc which can be cloned to outputs which will be in use.
    
    Correct crtc selection algorithm to choose a crtc which will be used by
    outputs which can all share the same crtc.
    
    Also, make randr 1.0 commands work even when --verbose is specified, and
    terminate event loop in that case when the screen change event is seen.

commit d707822aab19a0a8fe08f03300fdd9d4e206871e
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Sat Feb 10 18:27:06 2007 -0800

    Selecting a crtc by index was failing to match a crtc.
    
    --crtc <index> would fail to match because of a logic bug using & instead of
    &&.

commit 89bf2c3c0e17c67adc3e2fdca54f0e8254dc8968
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Sat Feb 10 16:14:58 2007 -0800

    Display set of available CRTCs per output in --verbose mode.

commit 067cafb5cda0aa6e34773e888fd469ff657760c2
Merge: 7c25c24 b0a00df
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Wed Jan 31 15:25:35 2007 -0800

    Merge branch 'randr-1.2'
    
    Merge support for RandR 1.2 changes to the xrandr program along with
    documentation for the new options.

commit b0a00df69f832ada40be6bd6973835439a698440
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Wed Jan 31 15:22:02 2007 -0800

    Update documentation to include all RandR 1.2 options.
    
    Also, require libXrandr version 1.2.0.0 or better.

commit 6b9310d66eed59527d4002294be13884a7cbeacc
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Tue Jan 30 20:35:58 2007 -0800

    Missing return statement from output_rotation.
    
    output_rotation was returning garbage making the available output rotations
    display incorrectly.

commit 5c3b6b1013c7565c40e82bfc0514a3dd80aec2d8
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Tue Jan 30 20:16:46 2007 -0800

    Remove xrandr12.c app now that xrandr.c has RandR 1.2 support.

commit eaf3e459d7760bbcb3c7f7c9b23b1e386189c71e
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Tue Jan 30 00:10:23 2007 -0800

    Add --reflect option for RandR 1.2 reflection selection.
    
    Also, display available rotations after current rotation

commit 8ecc6c034836a6fb6df0e2ad24429f506bf82e37
Author: Eric Anholt <eric@anholt.net>
Date:   Tue Jan 16 10:48:01 2007 -0800

    Add display for 32-bit integer properties, such as backlight.

commit 4112d13d7b15150e33687b687604c3a72188c066
Author: Keith Packard <keithp@mandolin.keithp.com>
Date:   Mon Jan 1 17:04:42 2007 -0800

    Mode on CRTC may not be present for any output.
    
    When an output gets disconnected, the current CRTC mode may no longer be
    listed as valid for any output, but will still be listed for the screen.
    Search for current crtc mode in the screen list rather than the per-output
    list.

commit 6ef7b2deafd09ae1a4b159f3c2e6e9db64bf01dc
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Sun Dec 31 23:02:12 2006 -0800

    Using %lf to read float overwrote adjacent variable.
    
    Just use floats everywhere and %f instead.

commit f6073333dcfb6989ff8793854fb42e08388444c5
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Sun Dec 31 13:55:14 2006 -0800

    Add rotation/reflection status to 1.2 query output.
    
    The previous cleanup had left these values missing from any output.
    Also it now reports the effective size of the mode within the screen.

commit 5d2a76b70b7b59a45655b25db79d75cb08fe671d
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Sun Dec 31 13:38:40 2006 -0800

    Clean up RandR 1.2 query output.
    
    Make brief mode list just mode names and refresh rates.
    Add --prop/--properties flag to show properties.
    Add --q1 flag to force showing pre-1.2 data.

commit d9aeb4a7544ad4a33f6f54bc46bff5cdf231a986
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Sun Dec 31 12:45:25 2006 -0800

    Add --rate support to RandR 1.2 mode selection.
    
    Search for mode closest to specified rate for each output and use that
    instead of the one with the first matching name. If no rate is specified,
    the first one still matches allowing the driver to place preferred rates
    first in the list.

commit c04d69cbd8a8a96862356afcda6ee679d663a524
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Sun Dec 31 11:58:11 2006 -0800

    Grab server while applying changes.
    
    Applications that respond to screen size changes by quering Xinerama
    information need to be blocked so that they see the entirety of the changes
    rather than just the screen size shift and not the crtc changes.

commit 8e78af971048db711163ea297153703b4f37f3c9
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Sat Dec 30 21:49:40 2006 -0800

    Enable global --auto flag. Allow output name for --dpi switch.
    
    --auto at the global level checks for output status changes and
    automatically configures changed outputs. --dpi with an output switch uses
    the specified output as the source of the dpi information.

commit f7a3e478a6a5d59a2bbcd6dc416639f93a0520fd
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Sat Dec 30 19:41:48 2006 -0800

    Use Bool type. Position relative to disabled output is 0,0.
    
    Switch uses of int that are strictly boolean to Bool.
    Instead of making attempts to set position relative to a disabled output an
    error, just place the output at 0,0.

commit cb017692883daf64e0cf442a39b33eaafed0e420
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Sat Dec 30 17:34:46 2006 -0800

    Restructure RandR 1.2 support to handle relative placement.
    
    Ok, really, this is mostly a rewrite of the RandR 1.2 support.  First,
    collect commands from command line arguments.  Next, fill in existing
    configuration from X server.  Calculate new configuration. Apply
    configuration, if anything fails, revert to previous configuration.
    
    Still left -- pure --auto, and --extend/--clone options.

commit b9dee113ce4105c1cf25e3c417c616c024aea823
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Fri Dec 29 00:55:37 2006 -0800

    Make query return 1.2 information if available

commit 90e4a4c13957bd003294f64b86460813dd38a3de
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Thu Dec 21 17:37:20 2006 -0800

    Accept hex mode numbers as well as mode names.
    
    Sometimes mode names are ambiguous; this lets the user specify modes by XID.

commit e8f7047885ec85096a3f35b9cfb20386104fdc55
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Tue Dec 19 16:27:46 2006 -0800

    Actually respect the --fb option

commit 7b32611632ab08b6a123db5df1c2b919b3a12104
Merge: a0df3aa 4bb1a9c
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Tue Dec 19 15:58:38 2006 -0800

    Merge branch 'randr-1.2-origin' into randr-1.2

commit a0df3aa81205b35ff8d9541c036cfd158cbd99ed
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Tue Dec 19 15:58:21 2006 -0800

    Correct format for sscanf to double variable "dpi"

commit 4bb1a9cd6f9cc3ed61d7913528afa3f573092833
Merge: b6c0382 6ef400f
Author: Keith Packard <keithp@bouzouki.jf.intel.com>
Date:   Wed Dec 13 11:36:36 2006 -0800

    Merge branch 'randr-1.2-origin' into randr-1.2. Detect invalid mode.
    
    Invalid mode test was checking wrong mode index. Also, print more
    informative error message when this occurs.

commit b6c03827bae74ef5b9517c4246b0165dad8ee780
Author: Keith Packard <keithp@bouzouki.jf.intel.com>
Date:   Wed Dec 13 11:27:30 2006 -0800

    Name CRTCs by index or id. Use current CRTC to get current mode.
    
    CRTCs have no intrinsic name, so let users provide either the number in the
    list or the XID when referring to them explicitly.
    When no mode is specified, look up the current CRTC for the output and use
    that mode, instead of using the mode on the target CRTC.
    When switching an output from one CRTC

commit 6ef400f35d7d8712d1ad1efd87a8a3cb8bfacd96
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Wed Dec 13 09:53:17 2006 -0800

    Add --preferred and --auto support.
    
    --preferred selects the 'best' mode for the monitor automatically, either by
    looking for a preferred mode, or selecting one which is closest to the
    current screen DPI.
    
    --auto checks connected status and disables the output if disconnected,
    otherwise it enables it with the preferred mode (as if --preferred).

commit c69c3080febd8617349f88557c3c04388a13a76c
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Tue Dec 12 09:54:52 2006 -0800

    mark disabled crtc as changing, set rotation to 90 for disabled crtc.
    
    --off code was not correctly finding and marking the to-be-disabled crtc,
    and the disabling code was sending an uninitialized rotation value to the
    server when no outputs were connected.

commit 6be56cd10d934e496004f9ffd377225fd179f4b1
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Mon Dec 11 00:39:48 2006 -0800

    Update manual, elide unsupported options from usage, remove xrandr12 from build

commit 624c75e8c250b33a81890c8f0da741a13ad4e7d1
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Mon Dec 11 00:23:15 2006 -0800

    Add RandR 1.2 support to plain xrandr app. primitive for now

commit 7c25c245bceb0474541fe7a2615a4f665842ac32
Author: Jeremy C. Reed <reed@glacier.reedmedia.net>
Date:   Sat Dec 9 06:32:19 2006 -0600

    Document -v switch.

commit 2a32fa8cf8550a3a30871d25a23af07f65646c47
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Tue Nov 21 01:17:38 2006 -0800

    Track RandR output property changes

commit 795173d2b9b94a3468db277102b4898b4e5a1ead
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Thu Nov 16 22:14:33 2006 -0800

    properties are stored in unsigned char arrays

commit 2df4352bb43e155977f8d4c0b53771cb0085ab74
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Thu Nov 16 11:45:51 2006 -0800

    Remove RandR output options.
    
    Output options are to be replaced with properties.

commit 643787365fd716b902b597b67b2ec228dacfc862
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Wed Nov 1 10:57:24 2006 -0800

    Re-indent to 4 space tabs

commit 947ea6ee9d7cf72c5635c699b63ddda3be968675
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Wed Nov 1 10:55:21 2006 -0800

    Fix copyright and license information

commit dc41095b577db571439ff1a52facc4efe9f5132f
Author: Eric Anholt <eric@anholt.net>
Date:   Thu Nov 9 20:26:09 2006 -0800

    Print 8-bit integer output properties as 32-char rows of hex.
    
    This happens to produce pretty output for EDID data.

commit 67466ebb817e24bfd7f57cc82da16e194eb9c547
Author: Eric Anholt <eric@anholt.net>
Date:   Thu Nov 9 17:15:56 2006 -0800

    Add more .gitignore entries.

commit aafe9f7d24e96194a7ee11ba521a3c2c72dcdc95
Author: Eric Anholt <eric@anholt.net>
Date:   Thu Nov 9 17:15:06 2006 -0800

    Add output for output properties (assuming text) and blanking information.

commit 6ba07ae9ea5fa2829d17e8a1f3eb26e7c1a2813e
Author: Eric Anholt <eric@anholt.net>
Date:   Wed Nov 8 10:23:47 2006 -0800

    Add dot clock to output.

commit fba78f58029a806e4446d038b17b843d2c4026a6
Author: Keith Packard <keithp@mandolin.keithp.com>
Date:   Wed Nov 1 00:32:22 2006 -0800

    Track protocol moving physical size from mode to output

commit d9c45204a16e906b922ac94cae3c9f4f25b3ccdb
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Thu Oct 26 22:58:58 2006 -0700

    add physical size setting

commit bd6ac82ff7e7fc04ab589a3053dc7f13ed7a1ec4
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Thu Oct 5 21:50:42 2006 -0700

    Add crtc info. Mark preferred. Update to new SetCrtcConfig API.

commit fe04d38d01f54b93ddaf1cd48a655df7f7fe4b97
Author: Keith Packard <keithp@neko.keithp.com>
Date:   Thu Sep 21 08:16:45 2006 -0700

    Add CRTC disable code (given crtc, output 0, mode 0)

commit 7f1b81d443b78ff572726ad7d72eeb4a87c7189d
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Wed Sep 20 20:03:22 2006 -0700

    xrandr12, a horrible kludge, is now sufficient to do dynamic mergefb games.

commit eba1d3d8ab6226737c29e63fdd5433190baab06f
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Wed Sep 20 20:02:43 2006 -0700

    .cvsignore -> .gitignore

commit 6c5af262350a5fa33aa37293e8e7b537e344f52a
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Wed Sep 20 20:02:09 2006 -0700

    .cvsignore -> .gitignore

commit d8e86340444577dc7634d3e0db24fd809f4e4fbb
Author: Keith Packard <keithp@guitar.keithp.com>
Date:   Tue Sep 19 00:35:46 2006 -0700

    Add new xrandr12 program for RandR 1.2 protocol.
    
    Yes, xrandr12 will be merged with xrandr before release; it's just for
    debugging at present.

commit f88f8e79724b27f46a836fac4956cbe28749633a
Author: Adam Jackson <ajax@nwnk.net>
Date:   Wed Apr 26 23:43:34 2006 +0000

    Bump to 1.0.2

commit 47c6288e63ebe7a9bb2f3225e7d5a235bd979a5f
Author: Alan Coopersmith <Alan.Coopersmith@sun.com>
Date:   Tue Apr 25 22:54:01 2006 +0000

    Don't try to fprintf a NULL string when -display wasn't passed and
        connecting to $DISPLAY failed, since that segfaults on some platforms.

commit 0197bfdddca98c72bca0eeee349b90027638fc32
Author: Adam Jackson <ajax@nwnk.net>
Date:   Mon Mar 20 18:56:37 2006 +0000

    Bug #5511, #5512: Print more sensible error messages when fed broken
        command lines. (Bill Crawford)

commit 4f785cb5db6d95c9f539500e7b202a0f5addd19f
Author: Kevin E Martin <kem@kem.org>
Date:   Wed Dec 21 02:29:53 2005 +0000

    Update package version for X11R7 release.

commit 83491d233781c9e6a362aa8bac1ab4f2a239fdee
Author: Adam Jackson <ajax@nwnk.net>
Date:   Mon Dec 19 16:22:46 2005 +0000

    Stub COPYING files

commit 5d09a0b505a2c08b81879e61173459d23f4c41db
Author: Kevin E Martin <kem@kem.org>
Date:   Thu Dec 15 00:24:10 2005 +0000

    Update package version number for final X11R7 release candidate.

commit 3e0eb5b6f68ef9120153e7f01b4243ad4fa44254
Author: Kevin E Martin <kem@kem.org>
Date:   Tue Dec 6 22:48:25 2005 +0000

    Change *man_SOURCES ==> *man_PRE to fix autotools warnings.

commit d52f178dc51182e14d5d7ad9f2842f3e1d30a57f
Author: Kevin E Martin <kem@kem.org>
Date:   Sat Dec 3 05:49:27 2005 +0000

    Update package version number for X11R7 RC3 release.

commit f3b3596d181a7ab89b90561490f822171ec77479
Author: Alan Coopersmith <Alan.Coopersmith@sun.com>
Date:   Mon Nov 28 22:01:46 2005 +0000

    Change *mandir targets to use new *_MAN_DIR variables set by xorg-macros.m4
        update to fix bug #5167 (Linux prefers *.1x man pages in man1 subdir)

commit 28c2280644f808c89e42e379b531fbb0fdf39bc7
Author: Eric Anholt <anholt@freebsd.org>
Date:   Mon Nov 21 10:35:07 2005 +0000

    Another pass at .cvsignores for apps.

commit e5ab923625baf41a59e033abf3527709c8ef255b
Author: Eric Anholt <anholt@freebsd.org>
Date:   Sun Nov 20 22:08:55 2005 +0000

    Add/improve .cvsignore files for apps.

commit 7e1cf1fef9dd000569dd5390380fb567314644a5
Author: Kevin E Martin <kem@kem.org>
Date:   Sat Nov 19 07:15:38 2005 +0000

    Update pkgconfig files to separate library build-time dependencies from
        application build-time dependencies, and update package deps to work
        with separate build roots.

commit 89ab28833d4e2ff412a92bb2b47af2d78a109c00
Author: Kevin E Martin <kem@kem.org>
Date:   Wed Oct 19 02:47:57 2005 +0000

    Update package version number for RC1 release.

commit 60178bb0c8bc97055c9aee7986866ada615491e6
Author: Alan Coopersmith <Alan.Coopersmith@sun.com>
Date:   Mon Oct 17 23:56:24 2005 +0000

    Use @APP_MAN_SUFFIX@ instead of $(APP_MAN_SUFFIX) in macro substitutions to
        work better with BSD make

commit 958b347b1e5e427858d3e693e5487ec7ba4f5054
Author: Alan Coopersmith <Alan.Coopersmith@sun.com>
Date:   Fri Oct 14 00:25:47 2005 +0000

    Use sed to fill in variables in man page

commit 35e7414c6e4505b2e71be0e54ed0c7ff74f39db1
Author: Aaron Plattner <aplattner@nvidia.com>
Date:   Thu Oct 6 10:03:08 2005 +0000

    Tell the user when setting the screen configuration fails. Return nonzero
        so scripts can find out too.

commit 938ff7de3f2bc4979bbf8a5f68190cde2be12696
Author: Kevin E Martin <kem@kem.org>
Date:   Fri Jul 29 21:22:37 2005 +0000

    Various changes preparing packages for RC0:
    - Verify and update package version numbers as needed
    - Implement versioning scheme
    - Change bug address to point to bugzilla bug entry form
    - Disable loadable i18n in libX11 by default (use --enable-loadable-i18n to
        reenable it)
    - Fix makedepend to use pkgconfig and pass distcheck
    - Update build script to build macros first
    - Update modular Xorg version

commit f241e34fd0f3bedf5aa615dc8e17352b91de8cd9
Author: Daniel Stone <daniel@fooishbar.org>
Date:   Fri Jul 22 07:18:28 2005 +0000

    Fix path to man pages.

commit f87ac740a20ec3e8b452959081816f5fddeaaf87
Author: Adam Jackson <ajax@nwnk.net>
Date:   Wed Jul 20 19:32:03 2005 +0000

    Use a unique token for PKG_CHECK_MODULES. Otherwise, if you use a global
        configure cache, you cache it, and the cached value is probably wrong.

commit 5666f22654447eb381186a85a8e1630d419b0a88
Author: Søren Sandmann Pedersen <sandmann@daimi.au.dk>
Date:   Fri Jul 1 20:27:45 2005 +0000

    Build systems for xrdb, xrandr, xrefresh

commit 39a8c733612722dca456c315a5ad299da1fe29d6
Author: Markus Kuhn <Markus.Kuhn@cl.cam.ac.uk>
Date:   Sat Dec 4 00:43:18 2004 +0000

    Encoding of numerous files changed to UTF-8

commit df8c56f1f66cce27dd018248a30cd9465d2b545c
Author: Egbert Eich <eich@suse.de>
Date:   Fri Apr 23 19:55:03 2004 +0000

    Merging XORG-CURRENT into trunk

commit 791685e93f32489dcd2d02a77e1a79ffb6c97c17
Author: Egbert Eich <eich@suse.de>
Date:   Sun Mar 14 08:35:42 2004 +0000

    Importing vendor version xf86-4_4_99_1 on Sun Mar 14 00:26:39 PST 2004

commit 342e5f4d491f137e3930213e62192de3eece3155
Author: Egbert Eich <eich@suse.de>
Date:   Wed Mar 3 12:13:15 2004 +0000

    Importing vendor version xf86-4_4_0 on Wed Mar 3 04:09:24 PST 2004

commit e3c0383c8fdcf38d34b3fad607949b0693184ca7
Author: Egbert Eich <eich@suse.de>
Date:   Thu Feb 26 13:36:26 2004 +0000

    readding XFree86's cvs IDs

commit 633350fa648d2b57b3dd94cb1d220a0b826bef55
Author: Egbert Eich <eich@suse.de>
Date:   Thu Feb 26 09:24:14 2004 +0000

    Importing vendor version xf86-4_3_99_903 on Wed Feb 26 01:21:00 PST 2004

commit 22c66075090a14ad022ae73a080e76a5ace7c5d1
Author: Kaleb Keithley <kaleb@freedesktop.org>
Date:   Tue Nov 25 19:29:15 2003 +0000

    XFree86 4.3.99.16 Bring the tree up to date for the Cygwin folks

commit 05fa20267de7cdf44fb6de556910ed0e4ce665a5
Author: Kaleb Keithley <kaleb@freedesktop.org>
Date:   Fri Nov 14 16:49:23 2003 +0000

    XFree86 4.3.0.1

commit c973a27b6d07b8711041c0c22ba8568f168b447a
Author: Kaleb Keithley <kaleb@freedesktop.org>
Date:   Fri Nov 14 16:49:23 2003 +0000

    Initial revision