Makefile.in revision d13010c3 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18# 
19#  Copyright 2005  Red Hat, Inc.
20# 
21#  Permission to use, copy, modify, distribute, and sell this software and its
22#  documentation for any purpose is hereby granted without fee, provided that
23#  the above copyright notice appear in all copies and that both that
24#  copyright notice and this permission notice appear in supporting
25#  documentation, and that the name of Red Hat not be used in
26#  advertising or publicity pertaining to distribution of the software without
27#  specific, written prior permission.  Red Hat makes no
28#  representations about the suitability of this software for any purpose.  It
29#  is provided "as is" without express or implied warranty.
30# 
31#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
32#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
33#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
34#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
35#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
36#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
37#  PERFORMANCE OF THIS SOFTWARE.
38
39VPATH = @srcdir@
40pkgdatadir = $(datadir)/@PACKAGE@
41pkgincludedir = $(includedir)/@PACKAGE@
42pkglibdir = $(libdir)/@PACKAGE@
43pkglibexecdir = $(libexecdir)/@PACKAGE@
44am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
45install_sh_DATA = $(install_sh) -c -m 644
46install_sh_PROGRAM = $(install_sh) -c
47install_sh_SCRIPT = $(install_sh) -c
48INSTALL_HEADER = $(INSTALL_DATA)
49transform = $(program_transform_name)
50NORMAL_INSTALL = :
51PRE_INSTALL = :
52POST_INSTALL = :
53NORMAL_UNINSTALL = :
54PRE_UNINSTALL = :
55POST_UNINSTALL = :
56build_triplet = @build@
57host_triplet = @host@
58bin_PROGRAMS = xrdb$(EXEEXT)
59subdir = .
60DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
61	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
62	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL \
63	config.guess config.sub depcomp install-sh missing
64ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
65am__aclocal_m4_deps = $(top_srcdir)/configure.ac
66am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
67	$(ACLOCAL_M4)
68am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
69 configure.lineno config.status.lineno
70mkinstalldirs = $(install_sh) -d
71CONFIG_HEADER = config.h
72CONFIG_CLEAN_FILES =
73CONFIG_CLEAN_VPATH_FILES =
74am__installdirs = "$(DESTDIR)$(bindir)"
75PROGRAMS = $(bin_PROGRAMS)
76am_xrdb_OBJECTS = xrdb.$(OBJEXT)
77xrdb_OBJECTS = $(am_xrdb_OBJECTS)
78am__DEPENDENCIES_1 =
79xrdb_DEPENDENCIES = $(am__DEPENDENCIES_1)
80DEFAULT_INCLUDES = -I.@am__isrc@
81depcomp = $(SHELL) $(top_srcdir)/depcomp
82am__depfiles_maybe = depfiles
83am__mv = mv -f
84COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
85	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
86AM_V_CC = $(am__v_CC_$(V))
87am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
88am__v_CC_0 = @echo "  CC    " $@;
89AM_V_at = $(am__v_at_$(V))
90am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
91am__v_at_0 = @
92CCLD = $(CC)
93LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
94AM_V_CCLD = $(am__v_CCLD_$(V))
95am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
96am__v_CCLD_0 = @echo "  CCLD  " $@;
97AM_V_GEN = $(am__v_GEN_$(V))
98am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
99am__v_GEN_0 = @echo "  GEN   " $@;
100SOURCES = $(xrdb_SOURCES)
101DIST_SOURCES = $(xrdb_SOURCES)
102RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
103	html-recursive info-recursive install-data-recursive \
104	install-dvi-recursive install-exec-recursive \
105	install-html-recursive install-info-recursive \
106	install-pdf-recursive install-ps-recursive install-recursive \
107	installcheck-recursive installdirs-recursive pdf-recursive \
108	ps-recursive uninstall-recursive
109RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
110  distclean-recursive maintainer-clean-recursive
111AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
112	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
113	distdir dist dist-all distcheck
114ETAGS = etags
115CTAGS = ctags
116DIST_SUBDIRS = $(SUBDIRS)
117DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
118distdir = $(PACKAGE)-$(VERSION)
119top_distdir = $(distdir)
120am__remove_distdir = \
121  { test ! -d "$(distdir)" \
122    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
123         && rm -fr "$(distdir)"; }; }
124am__relativize = \
125  dir0=`pwd`; \
126  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
127  sed_rest='s,^[^/]*/*,,'; \
128  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
129  sed_butlast='s,/*[^/]*$$,,'; \
130  while test -n "$$dir1"; do \
131    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
132    if test "$$first" != "."; then \
133      if test "$$first" = ".."; then \
134        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
135        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
136      else \
137        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
138        if test "$$first2" = "$$first"; then \
139          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
140        else \
141          dir2="../$$dir2"; \
142        fi; \
143        dir0="$$dir0"/"$$first"; \
144      fi; \
145    fi; \
146    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
147  done; \
148  reldir="$$dir2"
149DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
150GZIP_ENV = --best
151distuninstallcheck_listfiles = find . -type f -print
152distcleancheck_listfiles = find . -type f -print
153ACLOCAL = @ACLOCAL@
154ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
155ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
156AMTAR = @AMTAR@
157AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
158APP_MAN_DIR = @APP_MAN_DIR@
159APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
160AUTOCONF = @AUTOCONF@
161AUTOHEADER = @AUTOHEADER@
162AUTOMAKE = @AUTOMAKE@
163AWK = @AWK@
164CC = @CC@
165CCDEPMODE = @CCDEPMODE@
166CFLAGS = @CFLAGS@
167CHANGELOG_CMD = @CHANGELOG_CMD@
168CPP = @CPP@
169CPPFLAGS = @CPPFLAGS@
170CPP_PATH = @CPP_PATH@
171CWARNFLAGS = @CWARNFLAGS@
172CYGPATH_W = @CYGPATH_W@
173DEFS = @DEFS@
174DEPDIR = @DEPDIR@
175DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
176DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
177ECHO_C = @ECHO_C@
178ECHO_N = @ECHO_N@
179ECHO_T = @ECHO_T@
180EGREP = @EGREP@
181EXEEXT = @EXEEXT@
182FILE_MAN_DIR = @FILE_MAN_DIR@
183FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
184GREP = @GREP@
185INSTALL = @INSTALL@
186INSTALL_CMD = @INSTALL_CMD@
187INSTALL_DATA = @INSTALL_DATA@
188INSTALL_PROGRAM = @INSTALL_PROGRAM@
189INSTALL_SCRIPT = @INSTALL_SCRIPT@
190INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
191LDFLAGS = @LDFLAGS@
192LIBOBJS = @LIBOBJS@
193LIBS = @LIBS@
194LIB_MAN_DIR = @LIB_MAN_DIR@
195LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
196LTLIBOBJS = @LTLIBOBJS@
197MAINT = @MAINT@
198MAKEINFO = @MAKEINFO@
199MAN_SUBSTS = @MAN_SUBSTS@
200MISC_MAN_DIR = @MISC_MAN_DIR@
201MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
202MKDIR_P = @MKDIR_P@
203OBJEXT = @OBJEXT@
204PACKAGE = @PACKAGE@
205PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
206PACKAGE_NAME = @PACKAGE_NAME@
207PACKAGE_STRING = @PACKAGE_STRING@
208PACKAGE_TARNAME = @PACKAGE_TARNAME@
209PACKAGE_URL = @PACKAGE_URL@
210PACKAGE_VERSION = @PACKAGE_VERSION@
211PATH_SEPARATOR = @PATH_SEPARATOR@
212PKG_CONFIG = @PKG_CONFIG@
213PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
214PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
215SED = @SED@
216SET_MAKE = @SET_MAKE@
217SHELL = @SHELL@
218STRIP = @STRIP@
219VERSION = @VERSION@
220XORG_MAN_PAGE = @XORG_MAN_PAGE@
221XRDB_CFLAGS = @XRDB_CFLAGS@
222XRDB_LIBS = @XRDB_LIBS@
223abs_builddir = @abs_builddir@
224abs_srcdir = @abs_srcdir@
225abs_top_builddir = @abs_top_builddir@
226abs_top_srcdir = @abs_top_srcdir@
227ac_ct_CC = @ac_ct_CC@
228am__include = @am__include@
229am__leading_dot = @am__leading_dot@
230am__quote = @am__quote@
231am__tar = @am__tar@
232am__untar = @am__untar@
233bindir = @bindir@
234build = @build@
235build_alias = @build_alias@
236build_cpu = @build_cpu@
237build_os = @build_os@
238build_vendor = @build_vendor@
239builddir = @builddir@
240datadir = @datadir@
241datarootdir = @datarootdir@
242docdir = @docdir@
243dvidir = @dvidir@
244exec_prefix = @exec_prefix@
245host = @host@
246host_alias = @host_alias@
247host_cpu = @host_cpu@
248host_os = @host_os@
249host_vendor = @host_vendor@
250htmldir = @htmldir@
251includedir = @includedir@
252infodir = @infodir@
253install_sh = @install_sh@
254libdir = @libdir@
255libexecdir = @libexecdir@
256localedir = @localedir@
257localstatedir = @localstatedir@
258mandir = @mandir@
259mkdir_p = @mkdir_p@
260oldincludedir = @oldincludedir@
261pdfdir = @pdfdir@
262prefix = @prefix@
263program_transform_name = @program_transform_name@
264psdir = @psdir@
265sbindir = @sbindir@
266sharedstatedir = @sharedstatedir@
267srcdir = @srcdir@
268sysconfdir = @sysconfdir@
269target_alias = @target_alias@
270top_build_prefix = @top_build_prefix@
271top_builddir = @top_builddir@
272top_srcdir = @top_srcdir@
273SUBDIRS = man
274AM_CFLAGS = $(CWARNFLAGS) $(XRDB_CFLAGS)
275xrdb_LDADD = $(XRDB_LIBS)
276xrdb_SOURCES = \
277        xrdb.c
278
279MAINTAINERCLEANFILES = ChangeLog INSTALL
280all: config.h
281	$(MAKE) $(AM_MAKEFLAGS) all-recursive
282
283.SUFFIXES:
284.SUFFIXES: .c .o .obj
285am--refresh:
286	@:
287$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
288	@for dep in $?; do \
289	  case '$(am__configure_deps)' in \
290	    *$$dep*) \
291	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
292	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
293		&& exit 0; \
294	      exit 1;; \
295	  esac; \
296	done; \
297	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
298	$(am__cd) $(top_srcdir) && \
299	  $(AUTOMAKE) --foreign Makefile
300.PRECIOUS: Makefile
301Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
302	@case '$?' in \
303	  *config.status*) \
304	    echo ' $(SHELL) ./config.status'; \
305	    $(SHELL) ./config.status;; \
306	  *) \
307	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
308	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
309	esac;
310
311$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
312	$(SHELL) ./config.status --recheck
313
314$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
315	$(am__cd) $(srcdir) && $(AUTOCONF)
316$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
317	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
318$(am__aclocal_m4_deps):
319
320config.h: stamp-h1
321	@if test ! -f $@; then \
322	  rm -f stamp-h1; \
323	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
324	else :; fi
325
326stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
327	@rm -f stamp-h1
328	cd $(top_builddir) && $(SHELL) ./config.status config.h
329$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
330	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
331	rm -f stamp-h1
332	touch $@
333
334distclean-hdr:
335	-rm -f config.h stamp-h1
336install-binPROGRAMS: $(bin_PROGRAMS)
337	@$(NORMAL_INSTALL)
338	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
339	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
340	for p in $$list; do echo "$$p $$p"; done | \
341	sed 's/$(EXEEXT)$$//' | \
342	while read p p1; do if test -f $$p; \
343	  then echo "$$p"; echo "$$p"; else :; fi; \
344	done | \
345	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
346	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
347	sed 'N;N;N;s,\n, ,g' | \
348	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
349	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
350	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
351	    else { print "f", $$3 "/" $$4, $$1; } } \
352	  END { for (d in files) print "f", d, files[d] }' | \
353	while read type dir files; do \
354	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
355	    test -z "$$files" || { \
356	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
357	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
358	    } \
359	; done
360
361uninstall-binPROGRAMS:
362	@$(NORMAL_UNINSTALL)
363	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
364	files=`for p in $$list; do echo "$$p"; done | \
365	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
366	      -e 's/$$/$(EXEEXT)/' `; \
367	test -n "$$list" || exit 0; \
368	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
369	cd "$(DESTDIR)$(bindir)" && rm -f $$files
370
371clean-binPROGRAMS:
372	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
373xrdb$(EXEEXT): $(xrdb_OBJECTS) $(xrdb_DEPENDENCIES) 
374	@rm -f xrdb$(EXEEXT)
375	$(AM_V_CCLD)$(LINK) $(xrdb_OBJECTS) $(xrdb_LDADD) $(LIBS)
376
377mostlyclean-compile:
378	-rm -f *.$(OBJEXT)
379
380distclean-compile:
381	-rm -f *.tab.c
382
383@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xrdb.Po@am__quote@
384
385.c.o:
386@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
387@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
388@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
389@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
390@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
391@am__fastdepCC_FALSE@	$(COMPILE) -c $<
392
393.c.obj:
394@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
395@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
396@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
397@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
398@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
399@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
400
401# This directory's subdirectories are mostly independent; you can cd
402# into them and run `make' without going through this Makefile.
403# To change the values of `make' variables: instead of editing Makefiles,
404# (1) if the variable is set in `config.status', edit `config.status'
405#     (which will cause the Makefiles to be regenerated when you run `make');
406# (2) otherwise, pass the desired values on the `make' command line.
407$(RECURSIVE_TARGETS):
408	@fail= failcom='exit 1'; \
409	for f in x $$MAKEFLAGS; do \
410	  case $$f in \
411	    *=* | --[!k]*);; \
412	    *k*) failcom='fail=yes';; \
413	  esac; \
414	done; \
415	dot_seen=no; \
416	target=`echo $@ | sed s/-recursive//`; \
417	list='$(SUBDIRS)'; for subdir in $$list; do \
418	  echo "Making $$target in $$subdir"; \
419	  if test "$$subdir" = "."; then \
420	    dot_seen=yes; \
421	    local_target="$$target-am"; \
422	  else \
423	    local_target="$$target"; \
424	  fi; \
425	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
426	  || eval $$failcom; \
427	done; \
428	if test "$$dot_seen" = "no"; then \
429	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
430	fi; test -z "$$fail"
431
432$(RECURSIVE_CLEAN_TARGETS):
433	@fail= failcom='exit 1'; \
434	for f in x $$MAKEFLAGS; do \
435	  case $$f in \
436	    *=* | --[!k]*);; \
437	    *k*) failcom='fail=yes';; \
438	  esac; \
439	done; \
440	dot_seen=no; \
441	case "$@" in \
442	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
443	  *) list='$(SUBDIRS)' ;; \
444	esac; \
445	rev=''; for subdir in $$list; do \
446	  if test "$$subdir" = "."; then :; else \
447	    rev="$$subdir $$rev"; \
448	  fi; \
449	done; \
450	rev="$$rev ."; \
451	target=`echo $@ | sed s/-recursive//`; \
452	for subdir in $$rev; do \
453	  echo "Making $$target in $$subdir"; \
454	  if test "$$subdir" = "."; then \
455	    local_target="$$target-am"; \
456	  else \
457	    local_target="$$target"; \
458	  fi; \
459	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
460	  || eval $$failcom; \
461	done && test -z "$$fail"
462tags-recursive:
463	list='$(SUBDIRS)'; for subdir in $$list; do \
464	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
465	done
466ctags-recursive:
467	list='$(SUBDIRS)'; for subdir in $$list; do \
468	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
469	done
470
471ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
472	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
473	unique=`for i in $$list; do \
474	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
475	  done | \
476	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
477	      END { if (nonempty) { for (i in files) print i; }; }'`; \
478	mkid -fID $$unique
479tags: TAGS
480
481TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
482		$(TAGS_FILES) $(LISP)
483	set x; \
484	here=`pwd`; \
485	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
486	  include_option=--etags-include; \
487	  empty_fix=.; \
488	else \
489	  include_option=--include; \
490	  empty_fix=; \
491	fi; \
492	list='$(SUBDIRS)'; for subdir in $$list; do \
493	  if test "$$subdir" = .; then :; else \
494	    test ! -f $$subdir/TAGS || \
495	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
496	  fi; \
497	done; \
498	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
499	unique=`for i in $$list; do \
500	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
501	  done | \
502	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
503	      END { if (nonempty) { for (i in files) print i; }; }'`; \
504	shift; \
505	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
506	  test -n "$$unique" || unique=$$empty_fix; \
507	  if test $$# -gt 0; then \
508	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
509	      "$$@" $$unique; \
510	  else \
511	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
512	      $$unique; \
513	  fi; \
514	fi
515ctags: CTAGS
516CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
517		$(TAGS_FILES) $(LISP)
518	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
519	unique=`for i in $$list; do \
520	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
521	  done | \
522	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
523	      END { if (nonempty) { for (i in files) print i; }; }'`; \
524	test -z "$(CTAGS_ARGS)$$unique" \
525	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
526	     $$unique
527
528GTAGS:
529	here=`$(am__cd) $(top_builddir) && pwd` \
530	  && $(am__cd) $(top_srcdir) \
531	  && gtags -i $(GTAGS_ARGS) "$$here"
532
533distclean-tags:
534	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
535
536distdir: $(DISTFILES)
537	$(am__remove_distdir)
538	test -d "$(distdir)" || mkdir "$(distdir)"
539	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
540	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
541	list='$(DISTFILES)'; \
542	  dist_files=`for file in $$list; do echo $$file; done | \
543	  sed -e "s|^$$srcdirstrip/||;t" \
544	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
545	case $$dist_files in \
546	  */*) $(MKDIR_P) `echo "$$dist_files" | \
547			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
548			   sort -u` ;; \
549	esac; \
550	for file in $$dist_files; do \
551	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
552	  if test -d $$d/$$file; then \
553	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
554	    if test -d "$(distdir)/$$file"; then \
555	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
556	    fi; \
557	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
558	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
559	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
560	    fi; \
561	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
562	  else \
563	    test -f "$(distdir)/$$file" \
564	    || cp -p $$d/$$file "$(distdir)/$$file" \
565	    || exit 1; \
566	  fi; \
567	done
568	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
569	  if test "$$subdir" = .; then :; else \
570	    test -d "$(distdir)/$$subdir" \
571	    || $(MKDIR_P) "$(distdir)/$$subdir" \
572	    || exit 1; \
573	  fi; \
574	done
575	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
576	  if test "$$subdir" = .; then :; else \
577	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
578	    $(am__relativize); \
579	    new_distdir=$$reldir; \
580	    dir1=$$subdir; dir2="$(top_distdir)"; \
581	    $(am__relativize); \
582	    new_top_distdir=$$reldir; \
583	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
584	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
585	    ($(am__cd) $$subdir && \
586	      $(MAKE) $(AM_MAKEFLAGS) \
587	        top_distdir="$$new_top_distdir" \
588	        distdir="$$new_distdir" \
589		am__remove_distdir=: \
590		am__skip_length_check=: \
591		am__skip_mode_fix=: \
592	        distdir) \
593	      || exit 1; \
594	  fi; \
595	done
596	$(MAKE) $(AM_MAKEFLAGS) \
597	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
598	  dist-hook
599	-test -n "$(am__skip_mode_fix)" \
600	|| find "$(distdir)" -type d ! -perm -755 \
601		-exec chmod u+rwx,go+rx {} \; -o \
602	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
603	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
604	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
605	|| chmod -R a+r "$(distdir)"
606dist-gzip: distdir
607	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
608	$(am__remove_distdir)
609dist-bzip2: distdir
610	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
611	$(am__remove_distdir)
612
613dist-lzma: distdir
614	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
615	$(am__remove_distdir)
616
617dist-xz: distdir
618	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
619	$(am__remove_distdir)
620
621dist-tarZ: distdir
622	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
623	$(am__remove_distdir)
624
625dist-shar: distdir
626	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
627	$(am__remove_distdir)
628
629dist-zip: distdir
630	-rm -f $(distdir).zip
631	zip -rq $(distdir).zip $(distdir)
632	$(am__remove_distdir)
633
634dist dist-all: distdir
635	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
636	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
637	$(am__remove_distdir)
638
639# This target untars the dist file and tries a VPATH configuration.  Then
640# it guarantees that the distribution is self-contained by making another
641# tarfile.
642distcheck: dist
643	case '$(DIST_ARCHIVES)' in \
644	*.tar.gz*) \
645	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
646	*.tar.bz2*) \
647	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
648	*.tar.lzma*) \
649	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
650	*.tar.xz*) \
651	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
652	*.tar.Z*) \
653	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
654	*.shar.gz*) \
655	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
656	*.zip*) \
657	  unzip $(distdir).zip ;;\
658	esac
659	chmod -R a-w $(distdir); chmod a+w $(distdir)
660	mkdir $(distdir)/_build
661	mkdir $(distdir)/_inst
662	chmod a-w $(distdir)
663	test -d $(distdir)/_build || exit 0; \
664	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
665	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
666	  && am__cwd=`pwd` \
667	  && $(am__cd) $(distdir)/_build \
668	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
669	    $(DISTCHECK_CONFIGURE_FLAGS) \
670	  && $(MAKE) $(AM_MAKEFLAGS) \
671	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
672	  && $(MAKE) $(AM_MAKEFLAGS) check \
673	  && $(MAKE) $(AM_MAKEFLAGS) install \
674	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
675	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
676	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
677	        distuninstallcheck \
678	  && chmod -R a-w "$$dc_install_base" \
679	  && ({ \
680	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
681	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
682	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
683	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
684	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
685	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
686	  && rm -rf "$$dc_destdir" \
687	  && $(MAKE) $(AM_MAKEFLAGS) dist \
688	  && rm -rf $(DIST_ARCHIVES) \
689	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
690	  && cd "$$am__cwd" \
691	  || exit 1
692	$(am__remove_distdir)
693	@(echo "$(distdir) archives ready for distribution: "; \
694	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
695	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
696distuninstallcheck:
697	@$(am__cd) '$(distuninstallcheck_dir)' \
698	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
699	   || { echo "ERROR: files left after uninstall:" ; \
700	        if test -n "$(DESTDIR)"; then \
701	          echo "  (check DESTDIR support)"; \
702	        fi ; \
703	        $(distuninstallcheck_listfiles) ; \
704	        exit 1; } >&2
705distcleancheck: distclean
706	@if test '$(srcdir)' = . ; then \
707	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
708	  exit 1 ; \
709	fi
710	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
711	  || { echo "ERROR: files left in build directory after distclean:" ; \
712	       $(distcleancheck_listfiles) ; \
713	       exit 1; } >&2
714check-am: all-am
715check: check-recursive
716all-am: Makefile $(PROGRAMS) config.h
717installdirs: installdirs-recursive
718installdirs-am:
719	for dir in "$(DESTDIR)$(bindir)"; do \
720	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
721	done
722install: install-recursive
723install-exec: install-exec-recursive
724install-data: install-data-recursive
725uninstall: uninstall-recursive
726
727install-am: all-am
728	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
729
730installcheck: installcheck-recursive
731install-strip:
732	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
733	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
734	  `test -z '$(STRIP)' || \
735	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
736mostlyclean-generic:
737
738clean-generic:
739
740distclean-generic:
741	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
742	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
743
744maintainer-clean-generic:
745	@echo "This command is intended for maintainers to use"
746	@echo "it deletes files that may require special tools to rebuild."
747	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
748clean: clean-recursive
749
750clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
751
752distclean: distclean-recursive
753	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
754	-rm -rf ./$(DEPDIR)
755	-rm -f Makefile
756distclean-am: clean-am distclean-compile distclean-generic \
757	distclean-hdr distclean-tags
758
759dvi: dvi-recursive
760
761dvi-am:
762
763html: html-recursive
764
765html-am:
766
767info: info-recursive
768
769info-am:
770
771install-data-am:
772
773install-dvi: install-dvi-recursive
774
775install-dvi-am:
776
777install-exec-am: install-binPROGRAMS
778
779install-html: install-html-recursive
780
781install-html-am:
782
783install-info: install-info-recursive
784
785install-info-am:
786
787install-man:
788
789install-pdf: install-pdf-recursive
790
791install-pdf-am:
792
793install-ps: install-ps-recursive
794
795install-ps-am:
796
797installcheck-am:
798
799maintainer-clean: maintainer-clean-recursive
800	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
801	-rm -rf $(top_srcdir)/autom4te.cache
802	-rm -rf ./$(DEPDIR)
803	-rm -f Makefile
804maintainer-clean-am: distclean-am maintainer-clean-generic
805
806mostlyclean: mostlyclean-recursive
807
808mostlyclean-am: mostlyclean-compile mostlyclean-generic
809
810pdf: pdf-recursive
811
812pdf-am:
813
814ps: ps-recursive
815
816ps-am:
817
818uninstall-am: uninstall-binPROGRAMS
819
820.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
821	ctags-recursive install-am install-strip tags-recursive
822
823.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
824	all all-am am--refresh check check-am clean clean-binPROGRAMS \
825	clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \
826	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
827	dist-zip distcheck distclean distclean-compile \
828	distclean-generic distclean-hdr distclean-tags distcleancheck \
829	distdir distuninstallcheck dvi dvi-am html html-am info \
830	info-am install install-am install-binPROGRAMS install-data \
831	install-data-am install-dvi install-dvi-am install-exec \
832	install-exec-am install-html install-html-am install-info \
833	install-info-am install-man install-pdf install-pdf-am \
834	install-ps install-ps-am install-strip installcheck \
835	installcheck-am installdirs installdirs-am maintainer-clean \
836	maintainer-clean-generic mostlyclean mostlyclean-compile \
837	mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
838	uninstall uninstall-am uninstall-binPROGRAMS
839
840
841.PHONY: ChangeLog INSTALL
842
843INSTALL:
844	$(INSTALL_CMD)
845
846ChangeLog:
847	$(CHANGELOG_CMD)
848
849dist-hook: ChangeLog INSTALL
850
851# Tell versions [3.59,3.63) of GNU make to not export all variables.
852# Otherwise a system limit (for SysV at least) may be exceeded.
853.NOEXPORT:
854