Makefile.in revision 8a355152 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# 
18#  Copyright 2005  Red Hat, Inc.
19# 
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Red Hat not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Red Hat makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29# 
30#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38
39VPATH = @srcdir@
40am__is_gnu_make = { \
41  if test -z '$(MAKELEVEL)'; then \
42    false; \
43  elif test -n '$(MAKE_HOST)'; then \
44    true; \
45  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
46    true; \
47  else \
48    false; \
49  fi; \
50}
51am__make_running_with_option = \
52  case $${target_option-} in \
53      ?) ;; \
54      *) echo "am__make_running_with_option: internal error: invalid" \
55              "target option '$${target_option-}' specified" >&2; \
56         exit 1;; \
57  esac; \
58  has_opt=no; \
59  sane_makeflags=$$MAKEFLAGS; \
60  if $(am__is_gnu_make); then \
61    sane_makeflags=$$MFLAGS; \
62  else \
63    case $$MAKEFLAGS in \
64      *\\[\ \	]*) \
65        bs=\\; \
66        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
67          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
68    esac; \
69  fi; \
70  skip_next=no; \
71  strip_trailopt () \
72  { \
73    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
74  }; \
75  for flg in $$sane_makeflags; do \
76    test $$skip_next = yes && { skip_next=no; continue; }; \
77    case $$flg in \
78      *=*|--*) continue;; \
79        -*I) strip_trailopt 'I'; skip_next=yes;; \
80      -*I?*) strip_trailopt 'I';; \
81        -*O) strip_trailopt 'O'; skip_next=yes;; \
82      -*O?*) strip_trailopt 'O';; \
83        -*l) strip_trailopt 'l'; skip_next=yes;; \
84      -*l?*) strip_trailopt 'l';; \
85      -[dEDm]) skip_next=yes;; \
86      -[JT]) skip_next=yes;; \
87    esac; \
88    case $$flg in \
89      *$$target_option*) has_opt=yes; break;; \
90    esac; \
91  done; \
92  test $$has_opt = yes
93am__make_dryrun = (target_option=n; $(am__make_running_with_option))
94am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
95pkgdatadir = $(datadir)/@PACKAGE@
96pkgincludedir = $(includedir)/@PACKAGE@
97pkglibdir = $(libdir)/@PACKAGE@
98pkglibexecdir = $(libexecdir)/@PACKAGE@
99am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
100install_sh_DATA = $(install_sh) -c -m 644
101install_sh_PROGRAM = $(install_sh) -c
102install_sh_SCRIPT = $(install_sh) -c
103INSTALL_HEADER = $(INSTALL_DATA)
104transform = $(program_transform_name)
105NORMAL_INSTALL = :
106PRE_INSTALL = :
107POST_INSTALL = :
108NORMAL_UNINSTALL = :
109PRE_UNINSTALL = :
110POST_UNINSTALL = :
111build_triplet = @build@
112host_triplet = @host@
113bin_PROGRAMS = xsm$(EXEEXT)
114subdir = .
115ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
116am__aclocal_m4_deps = $(top_srcdir)/configure.ac
117am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
118	$(ACLOCAL_M4)
119DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
120	$(am__configure_deps) $(dist_appdefault_DATA) \
121	$(am__DIST_COMMON)
122am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
123 configure.lineno config.status.lineno
124mkinstalldirs = $(install_sh) -d
125CONFIG_HEADER = config.h
126CONFIG_CLEAN_FILES =
127CONFIG_CLEAN_VPATH_FILES =
128am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)" \
129	"$(DESTDIR)$(systeminitdir)"
130PROGRAMS = $(bin_PROGRAMS)
131am_xsm_OBJECTS = auth.$(OBJEXT) choose.$(OBJEXT) info.$(OBJEXT) \
132	list.$(OBJEXT) lock.$(OBJEXT) log.$(OBJEXT) mainwin.$(OBJEXT) \
133	misc.$(OBJEXT) popup.$(OBJEXT) printhex.$(OBJEXT) \
134	prop.$(OBJEXT) remote.$(OBJEXT) restart.$(OBJEXT) \
135	save.$(OBJEXT) saveutil.$(OBJEXT) signals.$(OBJEXT) \
136	xsm.$(OBJEXT) xtwatch.$(OBJEXT)
137xsm_OBJECTS = $(am_xsm_OBJECTS)
138am__DEPENDENCIES_1 =
139xsm_DEPENDENCIES = $(am__DEPENDENCIES_1)
140AM_V_P = $(am__v_P_@AM_V@)
141am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
142am__v_P_0 = false
143am__v_P_1 = :
144AM_V_GEN = $(am__v_GEN_@AM_V@)
145am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
146am__v_GEN_0 = @echo "  GEN     " $@;
147am__v_GEN_1 = 
148AM_V_at = $(am__v_at_@AM_V@)
149am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
150am__v_at_0 = @
151am__v_at_1 = 
152DEFAULT_INCLUDES = -I.@am__isrc@
153depcomp = $(SHELL) $(top_srcdir)/depcomp
154am__depfiles_maybe = depfiles
155am__mv = mv -f
156COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
157	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
158AM_V_CC = $(am__v_CC_@AM_V@)
159am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
160am__v_CC_0 = @echo "  CC      " $@;
161am__v_CC_1 = 
162CCLD = $(CC)
163LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
164AM_V_CCLD = $(am__v_CCLD_@AM_V@)
165am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
166am__v_CCLD_0 = @echo "  CCLD    " $@;
167am__v_CCLD_1 = 
168SOURCES = $(xsm_SOURCES)
169DIST_SOURCES = $(xsm_SOURCES)
170RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
171	ctags-recursive dvi-recursive html-recursive info-recursive \
172	install-data-recursive install-dvi-recursive \
173	install-exec-recursive install-html-recursive \
174	install-info-recursive install-pdf-recursive \
175	install-ps-recursive install-recursive installcheck-recursive \
176	installdirs-recursive pdf-recursive ps-recursive \
177	tags-recursive uninstall-recursive
178am__can_run_installinfo = \
179  case $$AM_UPDATE_INFO_DIR in \
180    n|no|NO) false;; \
181    *) (install-info --version) >/dev/null 2>&1;; \
182  esac
183am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
184am__vpath_adj = case $$p in \
185    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
186    *) f=$$p;; \
187  esac;
188am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
189am__install_max = 40
190am__nobase_strip_setup = \
191  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
192am__nobase_strip = \
193  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
194am__nobase_list = $(am__nobase_strip_setup); \
195  for p in $$list; do echo "$$p $$p"; done | \
196  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
197  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
198    if (++n[$$2] == $(am__install_max)) \
199      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
200    END { for (dir in files) print dir, files[dir] }'
201am__base_list = \
202  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
203  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
204am__uninstall_files_from_dir = { \
205  test -z "$$files" \
206    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
207    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
208         $(am__cd) "$$dir" && rm -f $$files; }; \
209  }
210DATA = $(dist_appdefault_DATA) $(systeminit_DATA)
211RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
212  distclean-recursive maintainer-clean-recursive
213am__recursive_targets = \
214  $(RECURSIVE_TARGETS) \
215  $(RECURSIVE_CLEAN_TARGETS) \
216  $(am__extra_recursive_targets)
217AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
218	cscope distdir dist dist-all distcheck
219am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
220	$(LISP)config.h.in
221# Read a list of newline-separated strings from the standard input,
222# and print each of them once, without duplicates.  Input order is
223# *not* preserved.
224am__uniquify_input = $(AWK) '\
225  BEGIN { nonempty = 0; } \
226  { items[$$0] = 1; nonempty = 1; } \
227  END { if (nonempty) { for (i in items) print i; }; } \
228'
229# Make sure the list of sources is unique.  This is necessary because,
230# e.g., the same source file might be shared among _SOURCES variables
231# for different programs/libraries.
232am__define_uniq_tagged_files = \
233  list='$(am__tagged_files)'; \
234  unique=`for i in $$list; do \
235    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
236  done | $(am__uniquify_input)`
237ETAGS = etags
238CTAGS = ctags
239CSCOPE = cscope
240DIST_SUBDIRS = $(SUBDIRS)
241am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \
242	ChangeLog INSTALL README compile config.guess config.sub \
243	depcomp install-sh missing
244DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
245distdir = $(PACKAGE)-$(VERSION)
246top_distdir = $(distdir)
247am__remove_distdir = \
248  if test -d "$(distdir)"; then \
249    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
250      && rm -rf "$(distdir)" \
251      || { sleep 5 && rm -rf "$(distdir)"; }; \
252  else :; fi
253am__post_remove_distdir = $(am__remove_distdir)
254am__relativize = \
255  dir0=`pwd`; \
256  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
257  sed_rest='s,^[^/]*/*,,'; \
258  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
259  sed_butlast='s,/*[^/]*$$,,'; \
260  while test -n "$$dir1"; do \
261    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
262    if test "$$first" != "."; then \
263      if test "$$first" = ".."; then \
264        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
265        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
266      else \
267        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
268        if test "$$first2" = "$$first"; then \
269          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
270        else \
271          dir2="../$$dir2"; \
272        fi; \
273        dir0="$$dir0"/"$$first"; \
274      fi; \
275    fi; \
276    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
277  done; \
278  reldir="$$dir2"
279DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
280GZIP_ENV = --best
281DIST_TARGETS = dist-bzip2 dist-gzip
282distuninstallcheck_listfiles = find . -type f -print
283am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
284  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
285distcleancheck_listfiles = find . -type f -print
286ACLOCAL = @ACLOCAL@
287ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
288ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
289AMTAR = @AMTAR@
290AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
291APP_MAN_DIR = @APP_MAN_DIR@
292APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
293AUTOCONF = @AUTOCONF@
294AUTOHEADER = @AUTOHEADER@
295AUTOMAKE = @AUTOMAKE@
296AWK = @AWK@
297BASE_CFLAGS = @BASE_CFLAGS@
298CC = @CC@
299CCDEPMODE = @CCDEPMODE@
300CFLAGS = @CFLAGS@
301CHANGELOG_CMD = @CHANGELOG_CMD@
302CPP = @CPP@
303CPPFLAGS = @CPPFLAGS@
304CWARNFLAGS = @CWARNFLAGS@
305CYGPATH_W = @CYGPATH_W@
306DEFS = @DEFS@
307DEPDIR = @DEPDIR@
308DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
309DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
310ECHO_C = @ECHO_C@
311ECHO_N = @ECHO_N@
312ECHO_T = @ECHO_T@
313EGREP = @EGREP@
314EXEEXT = @EXEEXT@
315FILE_MAN_DIR = @FILE_MAN_DIR@
316FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
317GREP = @GREP@
318INSTALL = @INSTALL@
319INSTALL_CMD = @INSTALL_CMD@
320INSTALL_DATA = @INSTALL_DATA@
321INSTALL_PROGRAM = @INSTALL_PROGRAM@
322INSTALL_SCRIPT = @INSTALL_SCRIPT@
323INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
324LDFLAGS = @LDFLAGS@
325LIBOBJS = @LIBOBJS@
326LIBS = @LIBS@
327LIB_MAN_DIR = @LIB_MAN_DIR@
328LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
329LTLIBOBJS = @LTLIBOBJS@
330MAKEINFO = @MAKEINFO@
331MAN_SUBSTS = @MAN_SUBSTS@
332MISC_MAN_DIR = @MISC_MAN_DIR@
333MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
334MKDIR_P = @MKDIR_P@
335OBJEXT = @OBJEXT@
336PACKAGE = @PACKAGE@
337PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
338PACKAGE_NAME = @PACKAGE_NAME@
339PACKAGE_STRING = @PACKAGE_STRING@
340PACKAGE_TARNAME = @PACKAGE_TARNAME@
341PACKAGE_URL = @PACKAGE_URL@
342PACKAGE_VERSION = @PACKAGE_VERSION@
343PATH_SEPARATOR = @PATH_SEPARATOR@
344PKG_CONFIG = @PKG_CONFIG@
345PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
346PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
347RSH = @RSH@
348SED = @SED@
349SET_MAKE = @SET_MAKE@
350SHELL = @SHELL@
351STRICT_CFLAGS = @STRICT_CFLAGS@
352STRIP = @STRIP@
353VERSION = @VERSION@
354XORG_MAN_PAGE = @XORG_MAN_PAGE@
355XSM_CFLAGS = @XSM_CFLAGS@
356XSM_LIBS = @XSM_LIBS@
357abs_builddir = @abs_builddir@
358abs_srcdir = @abs_srcdir@
359abs_top_builddir = @abs_top_builddir@
360abs_top_srcdir = @abs_top_srcdir@
361ac_ct_CC = @ac_ct_CC@
362am__include = @am__include@
363am__leading_dot = @am__leading_dot@
364am__quote = @am__quote@
365am__tar = @am__tar@
366am__untar = @am__untar@
367appdefaultdir = @appdefaultdir@
368bindir = @bindir@
369build = @build@
370build_alias = @build_alias@
371build_cpu = @build_cpu@
372build_os = @build_os@
373build_vendor = @build_vendor@
374builddir = @builddir@
375datadir = @datadir@
376datarootdir = @datarootdir@
377docdir = @docdir@
378dvidir = @dvidir@
379exec_prefix = @exec_prefix@
380host = @host@
381host_alias = @host_alias@
382host_cpu = @host_cpu@
383host_os = @host_os@
384host_vendor = @host_vendor@
385htmldir = @htmldir@
386includedir = @includedir@
387infodir = @infodir@
388install_sh = @install_sh@
389libdir = @libdir@
390libexecdir = @libexecdir@
391localedir = @localedir@
392localstatedir = @localstatedir@
393mandir = @mandir@
394mkdir_p = @mkdir_p@
395oldincludedir = @oldincludedir@
396pdfdir = @pdfdir@
397prefix = @prefix@
398program_transform_name = @program_transform_name@
399psdir = @psdir@
400sbindir = @sbindir@
401sharedstatedir = @sharedstatedir@
402srcdir = @srcdir@
403sysconfdir = @sysconfdir@
404target_alias = @target_alias@
405top_build_prefix = @top_build_prefix@
406top_builddir = @top_builddir@
407top_srcdir = @top_srcdir@
408SUBDIRS = man
409SYSTEM_INIT_DIR = $(sysconfdir)/X11/xsm
410AM_CFLAGS = $(XSM_CFLAGS) $(CWARNFLAGS) -DRSHCMD=\"@RSH@\" \
411	-DSYSTEM_INIT_FILE=\"$(SYSTEM_INIT_DIR)/system.xsm\"
412
413xsm_LDADD = $(XSM_LIBS)
414xsm_SOURCES = \
415        auth.c \
416        auth.h \
417        choose.c \
418        choose.h \
419        info.c \
420        info.h \
421        list.c \
422        list.h \
423        lock.c \
424        lock.h \
425        log.c \
426        log.h \
427        mainwin.c \
428        mainwin.h \
429        misc.c \
430        popup.c \
431        popup.h \
432        printhex.c \
433        prop.c \
434        prop.h \
435        remote.c \
436        restart.c \
437        restart.h \
438        save.c \
439        save.h \
440        saveutil.c \
441        saveutil.h \
442        signals.c \
443        xsm.c \
444        xsm.h \
445        xtwatch.c \
446        xtwatch.h
447
448
449# App default files
450DISTCHECK_CONFIGURE_FLAGS = --with-appdefaultdir=\$${datadir}/X11/app-defaults
451dist_appdefault_DATA = \
452        app-defaults/XSm
453
454
455# system init file
456systeminitdir = $(SYSTEM_INIT_DIR)
457systeminit_DATA = system.xsm
458
459#
460EXTRA_DIST = system.xsm
461MAINTAINERCLEANFILES = ChangeLog INSTALL
462all: config.h
463	$(MAKE) $(AM_MAKEFLAGS) all-recursive
464
465.SUFFIXES:
466.SUFFIXES: .c .o .obj
467am--refresh: Makefile
468	@:
469$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
470	@for dep in $?; do \
471	  case '$(am__configure_deps)' in \
472	    *$$dep*) \
473	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
474	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
475		&& exit 0; \
476	      exit 1;; \
477	  esac; \
478	done; \
479	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
480	$(am__cd) $(top_srcdir) && \
481	  $(AUTOMAKE) --foreign Makefile
482Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
483	@case '$?' in \
484	  *config.status*) \
485	    echo ' $(SHELL) ./config.status'; \
486	    $(SHELL) ./config.status;; \
487	  *) \
488	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
489	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
490	esac;
491
492$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
493	$(SHELL) ./config.status --recheck
494
495$(top_srcdir)/configure:  $(am__configure_deps)
496	$(am__cd) $(srcdir) && $(AUTOCONF)
497$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
498	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
499$(am__aclocal_m4_deps):
500
501config.h: stamp-h1
502	@test -f $@ || rm -f stamp-h1
503	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
504
505stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
506	@rm -f stamp-h1
507	cd $(top_builddir) && $(SHELL) ./config.status config.h
508$(srcdir)/config.h.in:  $(am__configure_deps) 
509	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
510	rm -f stamp-h1
511	touch $@
512
513distclean-hdr:
514	-rm -f config.h stamp-h1
515install-binPROGRAMS: $(bin_PROGRAMS)
516	@$(NORMAL_INSTALL)
517	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
518	if test -n "$$list"; then \
519	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
520	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
521	fi; \
522	for p in $$list; do echo "$$p $$p"; done | \
523	sed 's/$(EXEEXT)$$//' | \
524	while read p p1; do if test -f $$p \
525	  ; then echo "$$p"; echo "$$p"; else :; fi; \
526	done | \
527	sed -e 'p;s,.*/,,;n;h' \
528	    -e 's|.*|.|' \
529	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
530	sed 'N;N;N;s,\n, ,g' | \
531	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
532	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
533	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
534	    else { print "f", $$3 "/" $$4, $$1; } } \
535	  END { for (d in files) print "f", d, files[d] }' | \
536	while read type dir files; do \
537	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
538	    test -z "$$files" || { \
539	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
540	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
541	    } \
542	; done
543
544uninstall-binPROGRAMS:
545	@$(NORMAL_UNINSTALL)
546	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
547	files=`for p in $$list; do echo "$$p"; done | \
548	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
549	      -e 's/$$/$(EXEEXT)/' \
550	`; \
551	test -n "$$list" || exit 0; \
552	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
553	cd "$(DESTDIR)$(bindir)" && rm -f $$files
554
555clean-binPROGRAMS:
556	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
557
558xsm$(EXEEXT): $(xsm_OBJECTS) $(xsm_DEPENDENCIES) $(EXTRA_xsm_DEPENDENCIES) 
559	@rm -f xsm$(EXEEXT)
560	$(AM_V_CCLD)$(LINK) $(xsm_OBJECTS) $(xsm_LDADD) $(LIBS)
561
562mostlyclean-compile:
563	-rm -f *.$(OBJEXT)
564
565distclean-compile:
566	-rm -f *.tab.c
567
568@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/auth.Po@am__quote@
569@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/choose.Po@am__quote@
570@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/info.Po@am__quote@
571@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/list.Po@am__quote@
572@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lock.Po@am__quote@
573@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/log.Po@am__quote@
574@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mainwin.Po@am__quote@
575@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Po@am__quote@
576@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/popup.Po@am__quote@
577@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/printhex.Po@am__quote@
578@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/prop.Po@am__quote@
579@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/remote.Po@am__quote@
580@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/restart.Po@am__quote@
581@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/save.Po@am__quote@
582@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/saveutil.Po@am__quote@
583@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/signals.Po@am__quote@
584@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xsm.Po@am__quote@
585@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xtwatch.Po@am__quote@
586
587.c.o:
588@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
589@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
590@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
591@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
592@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
593
594.c.obj:
595@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
596@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
597@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
598@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
599@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
600install-dist_appdefaultDATA: $(dist_appdefault_DATA)
601	@$(NORMAL_INSTALL)
602	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
603	if test -n "$$list"; then \
604	  echo " $(MKDIR_P) '$(DESTDIR)$(appdefaultdir)'"; \
605	  $(MKDIR_P) "$(DESTDIR)$(appdefaultdir)" || exit 1; \
606	fi; \
607	for p in $$list; do \
608	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
609	  echo "$$d$$p"; \
610	done | $(am__base_list) | \
611	while read files; do \
612	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appdefaultdir)'"; \
613	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appdefaultdir)" || exit $$?; \
614	done
615
616uninstall-dist_appdefaultDATA:
617	@$(NORMAL_UNINSTALL)
618	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
619	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
620	dir='$(DESTDIR)$(appdefaultdir)'; $(am__uninstall_files_from_dir)
621install-systeminitDATA: $(systeminit_DATA)
622	@$(NORMAL_INSTALL)
623	@list='$(systeminit_DATA)'; test -n "$(systeminitdir)" || list=; \
624	if test -n "$$list"; then \
625	  echo " $(MKDIR_P) '$(DESTDIR)$(systeminitdir)'"; \
626	  $(MKDIR_P) "$(DESTDIR)$(systeminitdir)" || exit 1; \
627	fi; \
628	for p in $$list; do \
629	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
630	  echo "$$d$$p"; \
631	done | $(am__base_list) | \
632	while read files; do \
633	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(systeminitdir)'"; \
634	  $(INSTALL_DATA) $$files "$(DESTDIR)$(systeminitdir)" || exit $$?; \
635	done
636
637uninstall-systeminitDATA:
638	@$(NORMAL_UNINSTALL)
639	@list='$(systeminit_DATA)'; test -n "$(systeminitdir)" || list=; \
640	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
641	dir='$(DESTDIR)$(systeminitdir)'; $(am__uninstall_files_from_dir)
642
643# This directory's subdirectories are mostly independent; you can cd
644# into them and run 'make' without going through this Makefile.
645# To change the values of 'make' variables: instead of editing Makefiles,
646# (1) if the variable is set in 'config.status', edit 'config.status'
647#     (which will cause the Makefiles to be regenerated when you run 'make');
648# (2) otherwise, pass the desired values on the 'make' command line.
649$(am__recursive_targets):
650	@fail=; \
651	if $(am__make_keepgoing); then \
652	  failcom='fail=yes'; \
653	else \
654	  failcom='exit 1'; \
655	fi; \
656	dot_seen=no; \
657	target=`echo $@ | sed s/-recursive//`; \
658	case "$@" in \
659	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
660	  *) list='$(SUBDIRS)' ;; \
661	esac; \
662	for subdir in $$list; do \
663	  echo "Making $$target in $$subdir"; \
664	  if test "$$subdir" = "."; then \
665	    dot_seen=yes; \
666	    local_target="$$target-am"; \
667	  else \
668	    local_target="$$target"; \
669	  fi; \
670	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
671	  || eval $$failcom; \
672	done; \
673	if test "$$dot_seen" = "no"; then \
674	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
675	fi; test -z "$$fail"
676
677ID: $(am__tagged_files)
678	$(am__define_uniq_tagged_files); mkid -fID $$unique
679tags: tags-recursive
680TAGS: tags
681
682tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
683	set x; \
684	here=`pwd`; \
685	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
686	  include_option=--etags-include; \
687	  empty_fix=.; \
688	else \
689	  include_option=--include; \
690	  empty_fix=; \
691	fi; \
692	list='$(SUBDIRS)'; for subdir in $$list; do \
693	  if test "$$subdir" = .; then :; else \
694	    test ! -f $$subdir/TAGS || \
695	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
696	  fi; \
697	done; \
698	$(am__define_uniq_tagged_files); \
699	shift; \
700	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
701	  test -n "$$unique" || unique=$$empty_fix; \
702	  if test $$# -gt 0; then \
703	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
704	      "$$@" $$unique; \
705	  else \
706	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
707	      $$unique; \
708	  fi; \
709	fi
710ctags: ctags-recursive
711
712CTAGS: ctags
713ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
714	$(am__define_uniq_tagged_files); \
715	test -z "$(CTAGS_ARGS)$$unique" \
716	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
717	     $$unique
718
719GTAGS:
720	here=`$(am__cd) $(top_builddir) && pwd` \
721	  && $(am__cd) $(top_srcdir) \
722	  && gtags -i $(GTAGS_ARGS) "$$here"
723cscope: cscope.files
724	test ! -s cscope.files \
725	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
726clean-cscope:
727	-rm -f cscope.files
728cscope.files: clean-cscope cscopelist
729cscopelist: cscopelist-recursive
730
731cscopelist-am: $(am__tagged_files)
732	list='$(am__tagged_files)'; \
733	case "$(srcdir)" in \
734	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
735	  *) sdir=$(subdir)/$(srcdir) ;; \
736	esac; \
737	for i in $$list; do \
738	  if test -f "$$i"; then \
739	    echo "$(subdir)/$$i"; \
740	  else \
741	    echo "$$sdir/$$i"; \
742	  fi; \
743	done >> $(top_builddir)/cscope.files
744
745distclean-tags:
746	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
747	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
748
749distdir: $(DISTFILES)
750	$(am__remove_distdir)
751	test -d "$(distdir)" || mkdir "$(distdir)"
752	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
753	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
754	list='$(DISTFILES)'; \
755	  dist_files=`for file in $$list; do echo $$file; done | \
756	  sed -e "s|^$$srcdirstrip/||;t" \
757	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
758	case $$dist_files in \
759	  */*) $(MKDIR_P) `echo "$$dist_files" | \
760			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
761			   sort -u` ;; \
762	esac; \
763	for file in $$dist_files; do \
764	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
765	  if test -d $$d/$$file; then \
766	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
767	    if test -d "$(distdir)/$$file"; then \
768	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
769	    fi; \
770	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
771	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
772	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
773	    fi; \
774	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
775	  else \
776	    test -f "$(distdir)/$$file" \
777	    || cp -p $$d/$$file "$(distdir)/$$file" \
778	    || exit 1; \
779	  fi; \
780	done
781	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
782	  if test "$$subdir" = .; then :; else \
783	    $(am__make_dryrun) \
784	      || test -d "$(distdir)/$$subdir" \
785	      || $(MKDIR_P) "$(distdir)/$$subdir" \
786	      || exit 1; \
787	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
788	    $(am__relativize); \
789	    new_distdir=$$reldir; \
790	    dir1=$$subdir; dir2="$(top_distdir)"; \
791	    $(am__relativize); \
792	    new_top_distdir=$$reldir; \
793	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
794	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
795	    ($(am__cd) $$subdir && \
796	      $(MAKE) $(AM_MAKEFLAGS) \
797	        top_distdir="$$new_top_distdir" \
798	        distdir="$$new_distdir" \
799		am__remove_distdir=: \
800		am__skip_length_check=: \
801		am__skip_mode_fix=: \
802	        distdir) \
803	      || exit 1; \
804	  fi; \
805	done
806	$(MAKE) $(AM_MAKEFLAGS) \
807	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
808	  dist-hook
809	-test -n "$(am__skip_mode_fix)" \
810	|| find "$(distdir)" -type d ! -perm -755 \
811		-exec chmod u+rwx,go+rx {} \; -o \
812	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
813	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
814	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
815	|| chmod -R a+r "$(distdir)"
816dist-gzip: distdir
817	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
818	$(am__post_remove_distdir)
819dist-bzip2: distdir
820	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
821	$(am__post_remove_distdir)
822
823dist-lzip: distdir
824	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
825	$(am__post_remove_distdir)
826
827dist-xz: distdir
828	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
829	$(am__post_remove_distdir)
830
831dist-tarZ: distdir
832	@echo WARNING: "Support for distribution archives compressed with" \
833		       "legacy program 'compress' is deprecated." >&2
834	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
835	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
836	$(am__post_remove_distdir)
837
838dist-shar: distdir
839	@echo WARNING: "Support for shar distribution archives is" \
840	               "deprecated." >&2
841	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
842	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
843	$(am__post_remove_distdir)
844
845dist-zip: distdir
846	-rm -f $(distdir).zip
847	zip -rq $(distdir).zip $(distdir)
848	$(am__post_remove_distdir)
849
850dist dist-all:
851	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
852	$(am__post_remove_distdir)
853
854# This target untars the dist file and tries a VPATH configuration.  Then
855# it guarantees that the distribution is self-contained by making another
856# tarfile.
857distcheck: dist
858	case '$(DIST_ARCHIVES)' in \
859	*.tar.gz*) \
860	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
861	*.tar.bz2*) \
862	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
863	*.tar.lz*) \
864	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
865	*.tar.xz*) \
866	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
867	*.tar.Z*) \
868	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
869	*.shar.gz*) \
870	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
871	*.zip*) \
872	  unzip $(distdir).zip ;;\
873	esac
874	chmod -R a-w $(distdir)
875	chmod u+w $(distdir)
876	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
877	chmod a-w $(distdir)
878	test -d $(distdir)/_build || exit 0; \
879	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
880	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
881	  && am__cwd=`pwd` \
882	  && $(am__cd) $(distdir)/_build/sub \
883	  && ../../configure \
884	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
885	    $(DISTCHECK_CONFIGURE_FLAGS) \
886	    --srcdir=../.. --prefix="$$dc_install_base" \
887	  && $(MAKE) $(AM_MAKEFLAGS) \
888	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
889	  && $(MAKE) $(AM_MAKEFLAGS) check \
890	  && $(MAKE) $(AM_MAKEFLAGS) install \
891	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
892	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
893	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
894	        distuninstallcheck \
895	  && chmod -R a-w "$$dc_install_base" \
896	  && ({ \
897	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
898	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
899	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
900	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
901	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
902	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
903	  && rm -rf "$$dc_destdir" \
904	  && $(MAKE) $(AM_MAKEFLAGS) dist \
905	  && rm -rf $(DIST_ARCHIVES) \
906	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
907	  && cd "$$am__cwd" \
908	  || exit 1
909	$(am__post_remove_distdir)
910	@(echo "$(distdir) archives ready for distribution: "; \
911	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
912	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
913distuninstallcheck:
914	@test -n '$(distuninstallcheck_dir)' || { \
915	  echo 'ERROR: trying to run $@ with an empty' \
916	       '$$(distuninstallcheck_dir)' >&2; \
917	  exit 1; \
918	}; \
919	$(am__cd) '$(distuninstallcheck_dir)' || { \
920	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
921	  exit 1; \
922	}; \
923	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
924	   || { echo "ERROR: files left after uninstall:" ; \
925	        if test -n "$(DESTDIR)"; then \
926	          echo "  (check DESTDIR support)"; \
927	        fi ; \
928	        $(distuninstallcheck_listfiles) ; \
929	        exit 1; } >&2
930distcleancheck: distclean
931	@if test '$(srcdir)' = . ; then \
932	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
933	  exit 1 ; \
934	fi
935	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
936	  || { echo "ERROR: files left in build directory after distclean:" ; \
937	       $(distcleancheck_listfiles) ; \
938	       exit 1; } >&2
939check-am: all-am
940check: check-recursive
941all-am: Makefile $(PROGRAMS) $(DATA) config.h
942installdirs: installdirs-recursive
943installdirs-am:
944	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)" "$(DESTDIR)$(systeminitdir)"; do \
945	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
946	done
947install: install-recursive
948install-exec: install-exec-recursive
949install-data: install-data-recursive
950uninstall: uninstall-recursive
951
952install-am: all-am
953	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
954
955installcheck: installcheck-recursive
956install-strip:
957	if test -z '$(STRIP)'; then \
958	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
959	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
960	      install; \
961	else \
962	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
963	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
964	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
965	fi
966mostlyclean-generic:
967
968clean-generic:
969
970distclean-generic:
971	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
972	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
973
974maintainer-clean-generic:
975	@echo "This command is intended for maintainers to use"
976	@echo "it deletes files that may require special tools to rebuild."
977	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
978clean: clean-recursive
979
980clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
981
982distclean: distclean-recursive
983	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
984	-rm -rf ./$(DEPDIR)
985	-rm -f Makefile
986distclean-am: clean-am distclean-compile distclean-generic \
987	distclean-hdr distclean-tags
988
989dvi: dvi-recursive
990
991dvi-am:
992
993html: html-recursive
994
995html-am:
996
997info: info-recursive
998
999info-am:
1000
1001install-data-am: install-dist_appdefaultDATA install-systeminitDATA
1002
1003install-dvi: install-dvi-recursive
1004
1005install-dvi-am:
1006
1007install-exec-am: install-binPROGRAMS
1008
1009install-html: install-html-recursive
1010
1011install-html-am:
1012
1013install-info: install-info-recursive
1014
1015install-info-am:
1016
1017install-man:
1018
1019install-pdf: install-pdf-recursive
1020
1021install-pdf-am:
1022
1023install-ps: install-ps-recursive
1024
1025install-ps-am:
1026
1027installcheck-am:
1028
1029maintainer-clean: maintainer-clean-recursive
1030	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
1031	-rm -rf $(top_srcdir)/autom4te.cache
1032	-rm -rf ./$(DEPDIR)
1033	-rm -f Makefile
1034maintainer-clean-am: distclean-am maintainer-clean-generic
1035
1036mostlyclean: mostlyclean-recursive
1037
1038mostlyclean-am: mostlyclean-compile mostlyclean-generic
1039
1040pdf: pdf-recursive
1041
1042pdf-am:
1043
1044ps: ps-recursive
1045
1046ps-am:
1047
1048uninstall-am: uninstall-binPROGRAMS uninstall-dist_appdefaultDATA \
1049	uninstall-systeminitDATA
1050
1051.MAKE: $(am__recursive_targets) all install-am install-strip
1052
1053.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1054	am--refresh check check-am clean clean-binPROGRAMS \
1055	clean-cscope clean-generic cscope cscopelist-am ctags ctags-am \
1056	dist dist-all dist-bzip2 dist-gzip dist-hook dist-lzip \
1057	dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
1058	distclean-compile distclean-generic distclean-hdr \
1059	distclean-tags distcleancheck distdir distuninstallcheck dvi \
1060	dvi-am html html-am info info-am install install-am \
1061	install-binPROGRAMS install-data install-data-am \
1062	install-dist_appdefaultDATA install-dvi install-dvi-am \
1063	install-exec install-exec-am install-html install-html-am \
1064	install-info install-info-am install-man install-pdf \
1065	install-pdf-am install-ps install-ps-am install-strip \
1066	install-systeminitDATA installcheck installcheck-am \
1067	installdirs installdirs-am maintainer-clean \
1068	maintainer-clean-generic mostlyclean mostlyclean-compile \
1069	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
1070	uninstall-am uninstall-binPROGRAMS \
1071	uninstall-dist_appdefaultDATA uninstall-systeminitDATA
1072
1073.PRECIOUS: Makefile
1074
1075
1076.PHONY: ChangeLog INSTALL
1077
1078INSTALL:
1079	$(INSTALL_CMD)
1080
1081ChangeLog:
1082	$(CHANGELOG_CMD)
1083
1084dist-hook: ChangeLog INSTALL
1085
1086# Tell versions [3.59,3.63) of GNU make to not export all variables.
1087# Otherwise a system limit (for SysV at least) may be exceeded.
1088.NOEXPORT:
1089