Consistency changes only. Start sentences with a capital letter and end
them with a full stop.

branches: 1.96.64; 1.96.78;
fix typo in comment

move default config files from /etc/default -> /etc/defaults, to be
consistent with what FreeBSD uses /etc/defaults for, and since SVR4
uses /etc/default for another purpose.
as discussed on tech-userlevel, and no objections were made.

migrate guts of these /etc/foo.conf config files into /etc/default/foo.conf,
and source the latter in the former. this makes it easier for a sysadmin to
upgrade the default files without affecting local config, and retains the
semantics that the /etc/foo.conf files are the actual files that are edited
(as opposed to /etc/foo.local.conf or /etc/foo.conf.local or whatever, which
isn't as intuitive).

Move options into ntp_flags, to make it possible to add '-u' without
modifying rc.d/ntpdate

Add kdc/kdc_flags variables.

Add $sshd and $sshd_flags for use by both usr.bin/sshd and pkgsrc/security/{open,}ssh

As a precedent, note the presence of $gated, even though we do not distribute
gated outside of pkgsrc.

clarify the difference between $critical_filesystems_beforenet and
$critical_filesystems, and why `/var' should be in the former (or
implied as part of `/' which is already mounted).

- be consistent in formatting sentences
- note that xdm might need wscons for local X servers (c.f. [install/9967])

Fix typo (enable -> enabled)

Clarify comment that inetd only starts up IP-based services *that are
enabled in /etc/inetd.conf* (someone asked me last week why NetBSD doesn't
come with a telnet server...)

remove ip6defaultif configuration. because:
- ndp is in /usr/sbin, chokes on NFS-mounted /usr installation
- the option is just for IPv6 specification geek, not for normal users

branches: 1.85.2;
add rc.d/ipsec for ipsec configuration. when enabled, it will inject
/etc/ipsec.conf into "setkey -f". PR 9609.

Enable -6 flag to nfsd.

Rename a remaing comment about portmap to rpcbind.

s/portmap/rpcbind/

branches: 1.81.2;
Change xntpd to ntpd.

Provide rc.d support for the Postfix mail system. Committed to the
base because there is no support for packages in rc.d, and Postfix
is supposed to become part of the base system anyhow.

Death to nfsiod!

It is replaced by kernel threads that do the same thing. The number of
kernel threads used is set with the vfs.nfs.iothreads sysctl.

Improve backwards compatability and leave securelevel the old way.

The file /etc/sysctl.conf is now run with sysctl -f at boot time.
This replaces the previous /etc/rc.d/sysctl. Also, the variables are now
set earlier, between ipf/ipnat and the network coming up.

The rc.conf defcorename and securelevel variables are no more. You can
set them directly in sysctl.conf now.

ssh script removed, so remove sshd=NO line

Since we have an "sshd" script in rc.d, we should have an "sshd" knob
in rc.conf.

make clearing of /tmp after reboot configurable (default on), as per recent
discussion on current-users

add ip6defaultif configuration variable in rc.conf, for configuring
default outgoing interface for IPv6 host when default router list is empty.

the configuration is just for very rare case. it is safe to leave it empty.

change IPv6 configuration syntax to avoid ambiguity.
ip6mode=host: IPv6 host
ip6mode=autohost: IPv6 host, with autoconfig
ip6mode=router: IPv6 router

backward compatibility to "ip6forwading" is provided.

remove extraneous flags for xntpd startup, since there is now a
default ntp.conf file, per PR 4312

Change the name rc.conf.local to rc.local.conf. This makes *.conf match all
config files. Thanks to Greg Oster for the suggestion.

While we're waiting for the new all singing, all dancing rc system, add
a way to configure local stuff; if the file rc.conf.local exists it
is sourced at the end of rc.conf.

We need to put /usr in critical_filesystems_beforenet since rc.subr
("mount_critical_filesystems local") makes no assumptions about /usr.

Under certain (semi-normal) conditions, /usr is never mounted until
"mount -a" late in rc(8), and This Is Bad.

nit-picking spaces at EOL

Consistency nit - use X11 in all comments not sometimes x11

Add a comment about the ifconfig_xxN variables.

check for IPv6 kernel by exit status of "ifconfig lo0 inet6".
now IPv6 portion of netstart does not require /usr mount, it will mount it
as necessary (like pppd configuration do).

thanks goes to christos for the tip.

Default to -z in savecore_flags

accounting should be controllable via $accounting=YES in rc.conf...

Remove update, it's no longer used.

branches: 1.60.2;
Disable portmap by default, and add some more comments in that section.

Add -f /var/db/ntp.drift to default xntpd parameters.

Add support for $defcorename

branches: 1.57.2;
add sanity check on rtadvd invocation (allowed on IPv6 routers only).
add rc.conf entry for rtsold.

Screenblank has supported more than sun3 and sparc for a long, long time.

repair diskless startup: "netstart" needs "sysctl" and "awk" now, thus
"/usr" must be mounted. mount_critical_filesystems() didn't mount it,
even if listed in "critical_filesystems", if it is nfs.
Solution: introduce another rc.conf variable
"critical_filesystems_beforenet" which contains filesystems to be mounted
before "netstart".
Perhaps "netstart" should be split up, but this would make things even
more complex...

add IPv6 configuration (ip6forwarding, rtsol, route6d and rtadvd).
Right now netsetart does not bother you even if you do not have
"options INET6" in the kernel.

usbd is dead.

Minor wording change in a comment (also formerly known as -> formerly known as)

make -s flags for syslogd and lpd the default

Move the knowledge that /usr and /var should be mounted early from
rc.subr to the default rc.conf.
While this is no longer necessary to supress noise,
it increases the clarity of the situation and removes
one more bit of what should be adjustable configuration
from scripts that site admins shouldn't have to edit.

Addresses PRs misc/7406 and (partially) bin/7491.

Remove comment about critfs_requires_network, which has gone away

Add a note about critfs_requires_network on dhclient line.

branches: 1.47.2;
Change mount_critical_filesystems() so that if given an argument
of "local" it will not mount filesystem types it identifies as
network file systems (currently just nfs). Call the function twice,
before networking starts with arg "local", after networking starts
with arg "network". Remove critfs_require_network as is now redundant.

Add dhcrelay startup (allow only if dhcpd isn't started)

Add critfs_require_network, dhclient and dhclient_flags variables.

rc.wscons can take arguments, so we shouldn't simply source it but exec in
a subshell. Being here, add a prototype wscons_flags variable.

introduce a "wscons" rc.conf flag and run /etc/rc.wscons from /etc/rc
if it is set

oops, do not set a default securelevel.

increase the securelevel (using the same rules as before) much earlier in the
boot process. before cron, sendmail, inetd, etc, are run, but after lkms are
loaded. this avoids the chances of `@reboot', mail .forwards, remote logins,
etc., happening before the securelevel has been raised.

support dmesg=NO and dmesg_flags, and do not cut the old boot messages..they might be useful. fix a typo (rbootd is not rarpd)

Enable cron to be turned on and off from rc.conf, like other daemons.
From Soren S. Jorvang <soren@t.dk>, closes his PR bin/5250.

Add $portmap_flags variable, now that portmap has optional flags, and
by default, pass '-l' flag (libwrap logging) by analogy with inetd

Separate hardware daemons and add comments.

do not start usbd by default.

A basic /etc/rc.shutdown. Bails out if do_rcshutdown!=YES in /etc/rc.conf
(default is YES). Kills xdm and waits for it to terminate if it was enabled
in rc.conf (based on a code snippet from Ignatios).

Disable rc.lkm by default. This has the nontrivial, hidden effect that if
rc.lkm is run, and BIND is used to resolve names, the BEFORENET stage of
rc-calling-rc.lkm will hang trying to mount a nfs /usr.

add /usr/pkg/sbin:/usr/pkg/bin to (commented out) PATH entry

Turn on the usbd daemon per default. It's harmless since it just
exits if there are no USB controller.

Add USB support. Supported so far:
* UHCI and OHCI host controllers on PCI
* Hubs
* HID devices withe special drivers for mouse and keyboard
* Printers

no changes in previous rev, as documented; goof! (sorry). Once again - document that "domainname" is about YP/NIS, not Internet, per PR#5442

add "screenblank" support.

fix indentation

PR/3638: David Brownlee: Add /etc/ipnat.conf functionality.

fix formatting

print a warning if no swap devices are configured and "no_swap" is not YES.

- remove additional `adding interface aliases:' message.
- add `ppp_peers' support, which will run `pppd call <peer>' for each
peer listed in the ppp_peers file that also has a /etc/ppp/peers/<peer>
configuration file.

Add options to rc.conf and rc to start xfs (x font server) and xdm.
Add entries to rc.conf.5.
While we're here, note that the domestic kerberos damons are still
Kerberos IV, not kerberos version 5.

branches: 1.22.2;
Replace the (slightly broken) check to avoid double mounting of
filesystems by a correct one. (too bad that there was no agreement
about a mount option doing the same...)
Introduce a new rc.conf variable to mount user-defined filesystems
early in startup (eg for syslog, crashdumps, ...).

add $ipmon and $ipmon_flags, to control startup of ipmon(8)

turn off lpd by default.

Typo in comments: netstart uses /etc/defaultdomain, not /etc/domainname.

Add -l option to inetd.

Only start programms which we started in the previous version (1.15)
and also don't use the PATH with /usr/local/sbin:/usr/local/bin .

Split rc.conf variables for starting programs into two: an on/off
switch and a set of flags. Get rid of DEFAULT flags entirely. Print
warnings if on/off switches are not set, or are set incorrectly.
Add a shell function to simplify this on/off switch testing.

add apmd to /etc/rc and /etc/rc.conf per Lennart Augstsson in pr 3313

Allow routes to be flushed in netstart (rc.conf option, default YES).
PR 3228.

provide empty settings for $hostname, $domainname and $defaultroute,
with comments indicating alternation locations for info

ntpdate is not a daemon, and add comment for kerberos_server

Make xntpd put its pid in /var/run/xntpd.pid.

Add support for an ntpdate_hosts variable.
settings:
NO: don't run ntpdate on boot
DEFAULT:extract a list of hosts from /etc/ntp.conf
otherwise, a list of hosts to poll with ntpdate

make motd update conditional on an rc.conf variable (update_motd), and
move it before interactive logins are possible (just in case).

Move network interface config after programs run on boot-up, to match
the order this actually happens in at boot time.

Change the way interfaces are configured on startup.
We no longer do /etc/hostname.* files, we do /etc/ifconfig.* files
instead, which contain lines each of which is fed to
ifconfig in turn. A new variable, net_interfaces, controls which
interfaces get brought up, by default, ifconfig -l is used to find a list.

Re-ordered and added comments to match new rc.conf.5.

Added mopd.

Add . GC , which isn't used.

If foo_flags is DEFAULT, run the program with a default set of flags. Most
users will use this, and therefore will never have to worry about flags
changing between releases. It's also a bit less error-prone.

Add configuration flags for lockd/statd, and start them if an
NFS server or client is configured and the flags are not NO.

move start-time configuration from netstart, rc, rc.local into
the new /etc/rc.conf. this also includes the following changes:

netstart: ifaliases now includes a netmask, to ensure
aliases work.

rc/rc.local: make _everything_ based on configuration
in rc.conf. also move things around such that DNS and
YP are started early enough that other daemons needing
their services also exist. move ldconfig from rc.local
here, and also make it use /etc/ld.so.conf if it exists.
run /etc/rc.lkm if it exists, a boot time.