| History log of /src/sbin/bioctl/Makefile |
| Revision | | Date | Author | Comments |
| 1.5 |
| 16-Jan-2015 |
christos | kill 1 copy of strtonum.
|
| 1.4 |
| 11-Apr-2009 |
lukem | Enable WARNS=4 by default except for:
dump dump_lfs fsck_ffs fsck_lfs fsdb mount_smbfs
newfs_ext2fs newfs_lfs resize_lfs setkey
|
| 1.3 |
| 02-Jan-2008 |
xtraeme | branches: 1.3.12;
Rewrite bioctl(8) and add support for the following features:
- Ability to add/remove hot-spare disks (previously only 'add' was accepted).
- Ability to add/remove pass-through disks.
- Ability to create/remove RAID volumes with optional size, stripe, level,
member disks and others.
- Ability to start/stop consistency checks in a RAID volume.
- Ability to show only information about physical disks, volumes or both.
Rather than using multiple flags, the utility has been modified to use
the same mode than dkctl(8) (and maybe others), i.e:
$ ./bioctl
usage: bioctl device command [arg [...]]
Available commands:
show [disks] | [volumes]
alarm [enable] | [disable] | [silence] | [test]
blink start | stop [channel:target[.lun]]
hotspare add | remove channel:target.lun
passthru add DISKID | remove channel:target.lun
check start | stop VOLID
create volume VOLID DISKIDs [SIZE] STRIPE RAID_LEVEL channel:target.lun
remove volume VOLID channel:target.lun
$
I'll add support for other features soon.
|
| 1.2 |
| 04-Nov-2007 |
xtraeme | branches: 1.2.2;
- Remove the code for softraid, it's unlikely that NetBSD will support
this because we do have a working raidframe(4).
- Miscellaneous cleanups and make the code WARNS=4 compliant.
- Removed all stuff that doesn't apply to NetBSD.
|
| 1.1 |
| 01-May-2007 |
bouyer | branches: 1.1.2; 1.1.6; 1.1.8;
Add bio(4) and associated bioctl(8) from OpenBSD, a driver control block
device controllers, and more specifically raid controllers.
Add a new sensor type, ENVSYS_DRIVE, to report drive status. From OpenBSD.
Add bio and sysmon support to mfi(4). This allow userland to query
status for drives and logical volumes attached to a mfi(4) controller. While
there fix some debug printfs in mfi so they compile.
Add bio(4) to amd64 and i386 GENERIC.
|
| 1.1.8.3 |
| 15-Oct-2007 |
riz | Clean up after a mistake I made pulling up ticket #1838. We
really only need one copy of each new file. :-)
|
| 1.1.8.2 |
| 15-Oct-2007 |
riz | Pull up following revisions via patch (requested by bouyer in ticket #1838):
distrib/sets/lists/man/mi: revision 1.997
sbin/bioctl/strtonum.c: revision 1.1
sys/dev/Makefile: revision 1.25
sys/arch/amd64/conf/GENERIC: revision 1.139
sbin/bioctl/strtonum.h: revision 1.1
sys/dev/bio.c: revision 1.1
sbin/bioctl/bioctl.c: revision 1.1
share/man/man4/bio.4: revision 1.1
sbin/bioctl/bioctl.8: revision 1.1
sys/sys/envsys.h: revision 1.11
sbin/bioctl/bioctl.8: revision 1.3
sbin/bioctl/bioctl.8: revision 1.4
sys/arch/i386/conf/XEN2_DOM0: revision 1.25
distrib/sets/lists/base/mi: revision 1.704
sys/conf/majors: revision 1.34
share/man/man4/Makefile: revision 1.426
etc/MAKEDEV.tmpl: revision 1.86
sys/arch/i386/conf/GENERIC: revision 1.825
distrib/sets/lists/comp/mi: revision 1.1022
sys/conf/files: revision 1.839
usr.sbin/envstat/envstat.c: revision 1.24
sbin/Makefile: revision 1.105
sys/dev/ic/mfi.c: revision 1.4
sys/dev/biovar.h: revision 1.1
sys/dev/ic/mfivar.h: revision 1.4
sbin/bioctl/Makefile: revision 1.1
Fix typo.
Add bio(4) and associated bioctl(8) from OpenBSD, a driver control block
device controllers, and more specifically raid controllers.
Add a new sensor type, ENVSYS_DRIVE, to report drive status. From OpenBSD.
Add bio and sysmon support to mfi(4). This allow userland to query
status for drives and logical volumes attached to a mfi(4) controller. While
there fix some debug printfs in mfi so they compile.
Add bio(4) to amd64 and i386 GENERIC.
Add bio(4) and associated bioctl(8) from OpenBSD, a driver control block
device controllers, and more specifically raid controllers.
Add a new sensor type, ENVSYS_DRIVE, to report drive status. From OpenBSD.
Add bio and sysmon support to mfi(4). This allow userland to query
status for drives and logical volumes attached to a mfi(4) controller. While
there fix some debug printfs in mfi so they compile.
Add bio(4) to amd64 and i386 GENERIC.
Fix Dd argument (use full month names).
Use more markup.
Comment out references to safte(4) and softraid(4), which don't exist in
NetBSD.
Remove trailing whitespace.
Use macros instead of characters for HTML output (replace ">", "<"
with \*[Gt], \*[Lt]).
Sort sections.
Create /dev/bio
|
| 1.1.8.1 |
| 01-May-2007 |
riz | file Makefile was added on branch netbsd-3 on 2007-10-15 05:09:52 +0000
|
| 1.1.6.2 |
| 09-Jan-2008 |
matt | sync with HEAD
|
| 1.1.6.1 |
| 06-Nov-2007 |
matt | sync with HEAD
|
| 1.1.2.4 |
| 10-Dec-2010 |
bouyer | Remove spurious -I/usr/src/sys introduced by patch from ticket 1175.
This cause build failure in some cases.
|
| 1.1.2.3 |
| 29-Aug-2008 |
bouyer | Apply patch, requested by christos in tickets #1175:
sys/dev/bio.c patch
sys/dev/biovar.h patch
sys/dev/pci/arcmsr.c patch
sys/dev/pci/arcmsrvar.h patch
sbin/bioctl/Makefile patch
sbin/bioctl/bioctl.8 patch
sbin/bioctl/bioctl.c patch
sbin/bioctl/dehumanize_number.c patch
sbin/bioctl/strtonum.c patch
sbin/bioctl/strtonum.h patch
Port bioctl(8) and arcmsr(4) from current:
bioctl(8): Rewritten to handle new features like creating/removing
hot-spare, pass-through disks and RAID volumes, start/stop
consistency checks in volumes and others.
arcmsr(4): Added support to create/remove hot-spare, pass-through
disks and RAID volumes, start/stop consistency checks
in volumes as well as showing information about physical
disks (even if they are marked as hot-spare, pass-through
or unused).
|
| 1.1.2.2 |
| 08-May-2007 |
pavel | branches: 1.1.2.2.2;
Pull up following revision(s) (requested by bouyer in ticket #603):
distrib/sets/lists/base/mi: revision 1.704
distrib/sets/lists/comp/mi: revision 1.1022
distrib/sets/lists/man/mi: revision 1.997
doc/CHANGES: revision 1.839
sbin/Makefile: patch
sbin/bioctl/Makefile: revision 1.1
sbin/bioctl/bioctl.8: revision 1.1
sbin/bioctl/bioctl.c: revision 1.1
sbin/bioctl/strtonum.c: revision 1.1
sbin/bioctl/strtonum.h: revision 1.1
share/man/man4/Makefile: revision 1.426
share/man/man4/bio.4: revision 1.1
sys/arch/amd64/conf/GENERIC: revision 1.139
sys/arch/i386/conf/GENERIC: revision 1.825
sys/arch/i386/conf/XEN2_DOM0: revision 1.25
sys/conf/files: revision 1.839
sys/conf/majors: patch
sys/dev/Makefile: revision 1.25
sys/dev/bio.c: patch
sys/dev/biovar.h: patch
sys/dev/ic/mfi.c: revision 1.4-1.5
sys/dev/ic/mfivar.h: revision 1.4
sys/sys/envsys.h: revision 1.11
usr.sbin/envstat/envstat.c: revision 1.24
Add bio(4) and associated bioctl(8) from OpenBSD, a driver control block
device controllers, and more specifically raid controllers.
Add a new sensor type, ENVSYS_DRIVE, to report drive status. From OpenBSD.
Add bio and sysmon support to mfi(4). This allow userland to query
status for drives and logical volumes attached to a mfi(4) controller. While
there fix some debug printfs in mfi so they compile.
Add bio(4) to amd64 and i386 GENERIC.
note bio(4), envsys(4) DRIVE, and mfi(4) support for both.
tred->sensor is a u_int.
|
| 1.1.2.1 |
| 01-May-2007 |
pavel | branches: 1.1.2.1.2;
file Makefile was added on branch netbsd-4 on 2007-05-08 10:45:04 +0000
|
| 1.1.2.2.2.1 |
| 04-Sep-2008 |
skrll | Sync with netbsd-4.
|
| 1.1.2.1.2.1 locked by: joerg; |
| 01-May-2007 |
skrll | file Makefile was added on branch netbsd-4 on 2008-09-04 08:46:43 +0000
|
| 1.2.2.1 |
| 18-Feb-2008 |
mjf | Sync with HEAD.
|
| 1.3.12.1 |
| 13-May-2009 |
jym | Sync with HEAD.
Third (and last) commit. See http://mail-index.netbsd.org/source-changes/2009/05/13/msg221222.html
|
