History log of /src/sys/arch/arm/rockchip/rk_platform.c |
Revision | | Date | Author | Comments |
1.18 |
| 06-Sep-2025 |
thorpej | Refactor the "platform" defitions into fdt_platform.h
|
1.17 |
| 07-Apr-2023 |
skrll | Rename ARM_PLATFORM to FDT_PLATFORM and make it available outside arm.
|
1.16 |
| 23-Aug-2022 |
ryo | Add initial support for RK3588 SoC (CRU and IOMUX)
|
1.15 |
| 12-Nov-2021 |
jmcneill | arm: rockchip: Add support for RK3288 SoC.
The Rockchip RK3288 is a quad core Cortex-A17 SoC.
|
1.14 |
| 03-Sep-2021 |
mrg | revert "make ahcisata(4) work on rk3399 (rockpro64)" from 23-06-2021.
this problem is known to affect more than AHCI, and a more general solution has been commited now.
|
1.13 |
| 23-Jun-2021 |
mrg | make ahcisata(4) work on rk3399 (rockpro64)
on rk3399, a marvell 9230 ahci sata card consistently takes between 1213 and 1216 milliseconds, the ahci spec says this should complete in 1000 or fewer.
add a "pcie-reset-ms" uint32 property that ahcisata defaults to 1000 if not set, and the rockchip platform code sets to 2000.
ok @jmcneill
|
1.12 |
| 24-Apr-2021 |
thorpej | branches: 1.12.2; Merge thorpej-cfargs branch:
Simplify and make extensible the config_search() / config_found() / config_attach() interfaces: rather than having different variants for which arguments you want pass along, just have a single call that takes a variadic list of tag-value arguments.
Adjust all call sites: - Simplify wherever possible; don't pass along arguments that aren't actually needed. - Don't be explicit about what interface attribute is attaching if the device only has one. (More simplification.) - Add a config_probe() function to be used in indirect configuiration situations, making is visibly easier to see when indirect config is in play, and allowing for future change in semantics. (As of now, this is just a wrapper around config_match(), but that is an implementation detail.)
Remove unnecessary or redundant interface attributes where they're not needed.
There are currently 5 "cfargs" defined: - CFARG_SUBMATCH (submatch function for direct config) - CFARG_SEARCH (search function for indirect config) - CFARG_IATTR (interface attribte) - CFARG_LOCATORS (locators array) - CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)
...and a sentinel value CFARG_EOL.
Add some extra sanity checking to ensure that interface attributes aren't ambiguous.
Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark ports to associate those device handles with device_t instance. This will trickle trough to more places over time (need back-end for pre-OFW Sun OBP; any others?).
|
1.11 |
| 04-Feb-2021 |
thorpej | branches: 1.11.2; Call acpi_device_register() / fdtbus_device_register() as approrpriate.
|
1.10 |
| 28-Sep-2020 |
jmcneill | branches: 1.10.2; Get rid of a4x bus_space tag from fdtbus_attach_args. The only consumer of this was various com(4) glue so modify all of that to use the new com_init_regs_stride instead.
|
1.9 |
| 10-Jul-2020 |
skrll | Add support for KASAN on ARMv[67]
Thanks to maxv for many pointers and reviews.
|
1.8 |
| 30-Oct-2018 |
skrll | Retire fdt_putchar and ap_early_put_char in favour of uartputc.
|
1.7 |
| 20-Oct-2018 |
ryo | add missing .ap_mpstart for rk3399
|
1.6 |
| 18-Oct-2018 |
skrll | Provide generic start code that assumes the MMU is off and caches are disabled as per the linux booting protocol for ARMv6 and ARMv7 boards. u-boot image type should be changed to 'linux' for correct behaviour.
The new start code builds a minimal "bootstrap" L1PT with cached access disabled and uses the same table for all processors. AP startup is performed in less steps and more code is written in C.
The bootstrap tables and stack are placed into an (orphaned) section "_init_memory" which is given to uvm when it is no longer used.
Various kernels have been converted to use this code and tested. Some boards were provided by TNF. Thanks!
The GENERIC kernel now boots on boards using the TEGRA, SUNXI and EXYNOS kernels. The GENERIC kernel will also work on RPI2 using u-boot.
Thanks to martin@ and aymeric@ for testing on parallella and nanosoc respectively
|
1.5 |
| 21-Sep-2018 |
skrll | Centralise defparam CONSADDR, CONSPEED, CONMODE and CONADDR into opt_console.h and adjust.
|
1.4 |
| 10-Sep-2018 |
ryo | cleanup aarch64 mpstart and fdt bootstrap * arm_cpu_hatch_arg is a bad idea. avoid serializing CPU startup, and eliminate arm_cpu_hatch_arg. in mpstart, resolve own cpu index using array of cpu_mpidr[] (aarch64) * add support fdt enable-method "spin-table" * add support fdt enable-method "brcm,bcm2836-smp" (for 32bit RaspberryPi) * use arm_fdt_cpu_bootstrap() instead of psci_fdt_bootstrap() * rename "arm/fdt/psci_fdt.h" to "arm/fdt/psci_fdtvar.h" because of conflict of include file for needs-flag * add devmap for cpu spin-table of raspberrypi3/aarch64 * no need to force hatch APs for raspberrypi3/arm32 ifndef MULTIPROCESSOR. * fix to work pmap_extract(kerneltext/data/bss) even if before calling pmap_bootstrap
idea to use cpu_mpidr[] by jmcneill@. reviewd by skrll@. thanks.
|
1.3 |
| 12-Aug-2018 |
jmcneill | Add support for Rockchip RK3399 SoC.
|
1.2 |
| 05-Aug-2018 |
skrll | Add prefixes to struct arm_platform{,_info} members.
No functional change.
|
1.1 |
| 16-Jun-2018 |
jmcneill | branches: 1.1.2; 1.1.4; Add initial support for Rockchip RK3328 SoC.
|
1.1.4.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
1.1.2.6 |
| 26-Nov-2018 |
pgoyette | Sync with HEAD, resolve a couple of conflicts
|
1.1.2.5 |
| 20-Oct-2018 |
pgoyette | Sync with head
|
1.1.2.4 |
| 30-Sep-2018 |
pgoyette | Ssync with HEAD
|
1.1.2.3 |
| 06-Sep-2018 |
pgoyette | Sync with HEAD
Resolve a couple of conflicts (result of the uimin/uimax changes)
|
1.1.2.2 |
| 25-Jun-2018 |
pgoyette | Sync with HEAD
|
1.1.2.1 |
| 16-Jun-2018 |
pgoyette | file rk_platform.c was added on branch pgoyette-compat on 2018-06-25 07:25:39 +0000
|
1.10.2.1 |
| 03-Apr-2021 |
thorpej | Sync with HEAD.
|
1.11.2.1 |
| 03-Apr-2021 |
thorpej | - FDT device enumeration now sets the device handle using CFARG_DEVHANDLE. - fdtbus_device_register() is now obsolete, so G/C it. - of_device_register() is now obsolete, so G/C it.
|
1.12.2.1 |
| 01-Aug-2021 |
thorpej | Sync with HEAD.
|