Home | History | Annotate | Download | only in boot
History log of /src/sys/arch/cobalt/stand/boot/version
RevisionDateAuthorComments
 1.11  10-Jan-2010  tsutsui Add support for LBA48 read command to standalone wdc/wd driver.
Thanks to bouyer@ for comments about LBA48 boundary checks.

Tested on:
> Cobalt Qube 2700
> wd0 at atabus0 drive 0: <Hitachi HDS721616PLA380>
> wd0: 153 GB, 319120 cyl, 16 head, 63 sec, 512 bytes/sect x 321672960 sectors
via SATA-IDE converter, and NetBSD partition allocated at:
> 1: NetBSD (sysid 169)
> start 293603940, size 28069020 (13706 MB, Cyls 18276-20023/54/63)

Also bump version.
 1.10  28-May-2008  tsutsui Print boot banner and a loading kernel name onto LCD,
for users who don't have serial console. Bump version.
 1.9  16-Mar-2008  tsutsui branches: 1.9.2; 1.9.4; 1.9.6;
Add support for optional Z85C30 serial console on Cobalt Qube 2700.
Bump version.
 1.8  01-Mar-2008  tsutsui Misc fixes to support 21041 on Qube2700:
- prepare two TX descriptors to avoid race and also use chaind mode
- use a recently added pcicfgread() function to get tulip I/O address
- use cobalt model id to see if we have 21041 or 21143
(XXX maybe it's better to see PCI product ID)
- add code to reset SIA on 21041
- prepare and send filter setup packet on init
- reduce delay in RX polling
- bump version again

Now netboot works fine on Qube 2700 (even without console). Yay.
 1.7  01-Mar-2008  tsutsui - print cobalt model names in boot banner
- bump version.
 1.6  30-Oct-2007  tsutsui branches: 1.6.12; 1.6.16;
Add support for netboot via tlp0 with standalone tlp(4) driver
taken from arch/sandpoint/stand/netboot.
There are still some kludge but it just works on RaQ and RaQ2.
 1.5  17-Oct-2007  garbled Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.
 1.4  13-Aug-2007  tsutsui branches: 1.4.2; 1.4.6;
Parse "root=/dev/hdXN" args passed from the firmware and
set default boot device accordingly.
Requested and okay'ed by cyber@.
 1.3  10-Aug-2007  tsutsui Parse boot_flags specified on boot prompt and
pass decoded boothowto value to kernel via bootinfo.
 1.2  25-Jul-2007  tsutsui branches: 1.2.4;
Flush all cache data at the beginning of the bootloader.

Fixes silent hangs after loading 4.0_BETA2 GENERIC kernel
on Qube2 (and RaQ2) with 256MB RAM, reported and tested
by James Hartley on port-cobalt.

Obviously this should be pulled up to netbsd-4.
 1.1  25-Jun-2003  cdi branches: 1.1.18; 1.1.54; 1.1.60; 1.1.68; 1.1.70; 1.1.72; 1.1.74;
Initial commit of a 1-stage boot loader for NetBSD/cobalt. Only booting off
the hard drive is supported at the moment.
 1.1.74.1  15-Aug-2007  skrll Sync with HEAD.
 1.1.72.1  07-Aug-2007  matt Sync with HEAD.
 1.1.70.2  06-Jan-2008  wrstuden Catch up to netbsd-4.0 release.
 1.1.70.1  03-Sep-2007  wrstuden Sync w/ NetBSD-4-RC_1
 1.1.68.1  03-Oct-2007  garbled Sync with HEAD
 1.1.60.3  03-Dec-2007  ad Sync with HEAD.
 1.1.60.2  03-Dec-2007  ad Sync with HEAD.
 1.1.60.1  20-Aug-2007  ad Sync with HEAD.
 1.1.54.3  04-Nov-2007  pavel Pull up following revisions (requested by tsutsui in ticket #974):
sys/arch/cobalt/cobalt/autoconf.c: revision 1.25-1.26
sys/arch/cobalt/cobalt/machdep.c: revision 1.89
sys/arch/cobalt/stand/boot/Makefile: revision 1.12
sys/arch/cobalt/stand/boot/boot.c: revision 1.10
sys/arch/cobalt/stand/boot/boot.h: revision 1.6
sys/arch/cobalt/stand/boot/cache.c: revision 1.1-1.2
sys/arch/cobalt/stand/boot/clock.c: revision 1.2
sys/arch/cobalt/stand/boot/conf.c: revision 1.5
sys/arch/cobalt/stand/boot/devopen.c: revision 1.4
sys/arch/cobalt/stand/boot/nif_tlp.c: revision 1.1
sys/arch/cobalt/stand/boot/start.S: revision 1.6
sys/arch/cobalt/stand/boot/tlp.c: revision 1.1-1.3
sys/arch/cobalt/stand/boot/version: revision 1.6
sys/lib/libsa/dev_net.h: revision 1.5
Add an extern decl of try_bootp variable here since MD sources could set it.

In device_register(), check booted devices more properly:
- check "tlp" name on netboot
- use ata channel and drive numbers to check wd unit

Assume netboot if "nfsroot=/path" is specified in bootstring.

Use PCI bus/dev/function numbers rather than device unit
to check first tlp in device_register().

Add support for netboot via tlp0 with standalone tlp(4) driver
taken from arch/sandpoint/stand/netboot.
There are still some kludge but it just works on RaQ and RaQ2.

Fix my stupid bug in cache flush code and remove one kludge for it.

- use chaned mode for RX descs and allocate only one desc per each cacheline
to avoid possible race condition between CPU writeback vs DMA write
- remove unnecessary FS and LS bits from RxD->xd0
(sys/dev/ic/tulipvar.h sets them but maybe they are ignored?)
 1.1.54.2  28-Aug-2007  liamjfoy Pull up following revision(s) (requested by tsutsui in ticket #843):
sys/arch/cobalt/stand/boot/pciide.c: revision 1.6
sys/arch/cobalt/cobalt/machdep.c: revision 1.85
sys/arch/cobalt/stand/boot/com.c: revision 1.5
sys/arch/cobalt/include/bootinfo.h: revision 1.5
sys/arch/cobalt/stand/boot/boot.c: revision 1.6
sys/arch/cobalt/stand/boot/boot.h: revision 1.4
sys/arch/cobalt/stand/boot/boot.c: revision 1.7
sys/arch/cobalt/stand/boot/boot.c: revision 1.8
sys/arch/cobalt/stand/boot/wdvar.h: revision 1.7
sys/arch/cobalt/stand/boot/wd.c: revision 1.6
sys/arch/cobalt/stand/boot/wd.c: revision 1.7
sys/arch/cobalt/stand/boot/prf.c: revision 1.2
sys/arch/cobalt/stand/boot/devopen.c: revision 1.2
sys/arch/cobalt/stand/boot/bootinfo.c: revision 1.3
sys/arch/cobalt/stand/boot/bootinfo.h: revision 1.3
sys/arch/cobalt/stand/boot/wdc.c: revision 1.8
sys/arch/cobalt/stand/boot/version: revision 1.3
sys/arch/cobalt/stand/boot/version: revision 1.4
sys/arch/cobalt/stand/boot/cons.c: revision 1.4
sys/arch/cobalt/stand/boot/ns16550.c: revision 1.2
sys/arch/cobalt/stand/boot/tgets.c: revision 1.3
sys/arch/cobalt/stand/boot/ns16550.h: revision 1.2
Add support for booting off raidframe RAID1 mirrors.

Misc KNF and cosmetics.

Parse boot_flags specified on boot prompt and
pass decoded boothowto value to kernel via bootinfo.

Lookup boothowto flags in bootinfo.

Parse "root=/dev/hdXN" args passed from the firmware and
set default boot device accordingly.
Requested and okay'ed by cyber@.
 1.1.54.1  26-Jul-2007  liamjfoy Pull up following revision(s) (requested by tsutsui in ticket #793):
sys/arch/cobalt/stand/boot/start.S: revision 1.4
sys/arch/cobalt/stand/boot/version: revision 1.2
Flush all cache data at the beginning of the bootloader.
Fixes silent hangs after loading 4.0_BETA2 GENERIC kernel
on Qube2 (and RaQ2) with 256MB RAM, reported and tested
by James Hartley on port-cobalt.
Obviously this should be pulled up to netbsd-4.
 1.1.18.3  17-Mar-2008  yamt sync with head.
 1.1.18.2  15-Nov-2007  yamt sync with head.
 1.1.18.1  03-Sep-2007  yamt sync with head.
 1.2.4.2  31-Oct-2007  joerg Sync with HEAD.
 1.2.4.1  16-Aug-2007  jmcneill Sync with HEAD.
 1.4.6.1  13-Nov-2007  bouyer Sync with HEAD
 1.4.2.2  23-Mar-2008  matt sync with HEAD
 1.4.2.1  06-Nov-2007  matt sync with HEAD
 1.6.16.2  02-Jun-2008  mjf Sync with HEAD.
 1.6.16.1  03-Apr-2008  mjf Sync with HEAD.
 1.6.12.1  24-Mar-2008  keiichi sync with head.
 1.9.6.1  23-Jun-2008  wrstuden Sync w/ -current. 34 merge conflicts to follow.
 1.9.4.2  11-Mar-2010  yamt sync with head
 1.9.4.1  04-May-2009  yamt sync with head.
 1.9.2.1  04-Jun-2008  yamt sync with head

RSS XML Feed