branches: 1.93.4;
UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

PMAP_DEBUG has been deleted on arm

branches: 1.91.4; 1.91.8; 1.91.14;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.88.2; 1.88.4;
Remove KMEMSTATS.

branches: 1.87.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Reorganize symbol table embedding. The existing option SYMTAB_SPACE is
replaced by the make option COPY_SYMTAB set to any value. The copy of
the symbol table is no longer put into a buffer in kern_ksyms.o, but a
small helper object. This object is build first with a dummy size, then
the kernel is linked to compute the real dimension of the symbol table
buffer. After that, the helper object is rebuild and the kernel linked
again.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

Add COMPAT_NETBSD32 to more kernels (we have too many)

"internally consistency checks" -> "internal consistency checks"

branches: 1.82.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.81.2;
remove obsolete networking options

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.77.2;
Add PUFFS, putter and fss.

Bump up SYMTAB_SPACE

Remove obsolete SysV semaphores limit options (SEMMNI, SEMMNS, and SEMUME).

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.73.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.72.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

Bump SYMTAB_SPACE.

branches: 1.69.2; 1.69.4;
Remove unused count from pseudo-device md.

Bump SYMTAB_SPACE for a few configurations.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.66.2; 1.66.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

add options COMPAT_50 to all evbarm boards.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.63.4;
Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.61.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.60.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.59.2;
Merge kernel changes in matt-armv6 to HEAD.

branches: 1.58.6; 1.58.8; 1.58.10;
Remove arm support for IPKDB.

It hasn't worked since arm was broken out from arm32 in Jan 2001, and
no-one has noticed or cared to fix it.

Increase SYMTAB_SPACE because of more kernel bloat.

branches: 1.56.2; 1.56.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.55.6; 1.55.10;
Bump SYMTAB_SPACE so that it fits again.

branches: 1.54.8; 1.54.12; 1.54.14; 1.54.20;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Bump SYMTAB_SPACE.

branches: 1.52.2; 1.52.4; 1.52.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.50.2; 1.50.4; 1.50.6;
Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add (commented out) IPSEC_NAT_T option.

branches: 1.44.2; 1.44.4;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.40.4; 1.40.6;
pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.36.2;
Uppercase CPU where appropriate.

Remove piixide, since these boards will never, ever have one.

Split the Intel i31244 SATA controller ("Artisea") driver out of piixide
into its own driver (artsata).

Remove the IDE controllers that only exist in southbridge chips (which
none of these boards have).

XXX piixide stays for now, because that's where the Intel i31244 SATA
controller is. That will change, eventually.

Collapse the atabus declaration into "atabus* at ata? channel ?".

Split out the Silicon Image SATALink support into its own driver,
"satalink".

Bump SYMTAB_SPACE so that the symbol table fits again.

Add new per-chip pciide drivers.

Add atabus

Add support for the i80312 and i80321 I2C controllers.

Add COMPAT_16 to most arm based kernels. Mainly in preperation for doing
SA_SIGINFO work.

Default all builds to not have debug information. Significantly
reduces disk space needed for a make release, especially if using
dwarf2 debug.

branches: 1.24.2;
Use CPUFLAGS rather than COPTS to pass -mcpu=xscale.

Add ksyms.

Add mpt(4).

Add a selection of storage devices, and also build netbsd-sd0 and
netbsd-wd0 kernels.

Use indirect configuration for on-board devices (i.e. those things
attached to "obio") on the IQ80310 and IQ80321. It makes more sense
to do it this way for this type of system (the goal being to encapsulate
as much information about the board as possible into one file).

enable USERCONF by default; it's small and extremely useful to have available.

Disable coalesced writes on IOP310-based systems.

Use -mcpu=xscale.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.15.2; 1.15.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

XSCALE_CCLKCFG should not be set in std.iq80310. Set IQ80310 to use
XSCALE_CCLKCFG=9 (733MHz) and TEAMASA_NPWR to use XSCALE_CCLKCFG=7 (600MHz)
as that's what the part on the board is rated for.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

Restructure a few things in order to support other XScale core
I/O processors:
* The i80200 and the i80321 have the same CPU ID, so split the
CPU_XSCALE option into CPU_XSCALE_80200 and CPU_XSCALE_80321
options, and don't let them both be defined at the same time.
XXX May want to revisit this in the future.
* Split some registers common between the i80200 and i80321 into
<arm/xscale/xscalereg.h>.
* Rename a few existing functions.

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

branches: 1.9.2;
add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Document the CONUNIT and CONSPEED config options.

Since we build with DDB by default, build with SYMTAB_SPACE by default,
as well.

- Comment-out EXT2FS, MSDOSFS.
- Uncomment FDESC, KERNFS, PROCFS,
- Add commented-out DEBUG.
- Hard-wire the location of some of the on-board PCI devices.
- Also build a "netbsd-fxp0" with the root FS hard-wired to
the on-board Ethernet.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.4.2;
Delete an option that doesn't really exist.

Add VERBOSE_INIT_ARM and SYMTAB_SPACE options (commented out). Add
devices: iopxs (i80312 Companion I/O), pci, ppb, fxp, inphy, ukphy.

Rework and fleshing out of Intel IQ80310 XScale eval board support.
More work to do -- this is a snapshot of work-in-progress.

branches: 1.1.4;
more evbarm files (very incomplete).