branches: 1.97.4;
UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

PMAP_DEBUG has been deleted on arm

branches: 1.95.4; 1.95.10;
Remove the kernel PMC code. Sent yesterday on tech-kern@.

This change:

* Removes "options PERFCTRS", the associated includes, and the associated
ifdefs. In doing so, it removes several XXXSMPs in the MI code, which is
good.

* Removes the PMC code of ARM XSCALE.

* Removes all the pmc.h files. They were all empty, except for ARM XSCALE.

* Reorders the x86 PMC code not to rely on the legacy pmc.h file. The
definitions are put in sysarch.h.

* Removes the kern/sys_pmc.c file, and along with it, the sys_pmc_control
and sys_pmc_get_info syscalls. They are marked as OBSOL in kern,
netbsd32 and rump.

* Removes the pmc_evid_t and pmc_ctr_t types.

* Removes all the associated man pages. The sets are marked as obsolete.

branches: 1.94.2;
Revert changes that pinned-down i2c parent specs. The i2c subsystem
has been enhanced to make this unnecessary.

Fully specifiy the location of indirectly-configured I2C devices. In
particular, the parent spec must not be wild-carded, as doing so doesn't
work well on systems where more than one I2C bus is present.

branches: 1.92.2;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 2.

PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.89.2; 1.89.4;
Remove the KMEMSTATS option. It no longer exists.

branches: 1.88.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Reorganize symbol table embedding. The existing option SYMTAB_SPACE is
replaced by the make option COPY_SYMTAB set to any value. The copy of
the symbol table is no longer put into a buffer in kern_ksyms.o, but a
small helper object. This object is build first with a dummy size, then
the kernel is linked to compute the real dimension of the symbol table
buffer. After that, the helper object is rebuild and the kernel linked
again.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

add tmpfs.

Add COMPAT_NETBSD32 to more kernels (we have too many)

"internally consistency checks" -> "internal consistency checks"

branches: 1.82.2;
Bump SYMTAB_SPACE for clang.

G/C PFIL_HOOKS from the kernel configs.

branches: 1.80.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.74.2;
Add PUFFS, putter and fss.

Bump up SYMTAB_SPACE

Remove obsolete SysV semaphores limit options (SEMMNI, SEMMNS, and SEMUME).

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.70.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.69.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

Bump SYMTAB_SPACE for the many other evbarm kernels that also need it increased.

Remove trailing spaces.

branches: 1.65.2; 1.65.4;
Remove unused count from pseudo-device md.

Bump SYMTAB_SPACE for a few configurations.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.62.2; 1.62.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

add options COMPAT_50 to all evbarm boards.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.59.4;
Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.57.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.56.2;
Bump SYMTAB_SPACE so that it fits again.

branches: 1.55.2;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.54.6; 1.54.8; 1.54.10; 1.54.12;
Remove arm support for IPKDB.

It hasn't worked since arm was broken out from arm32 in Jan 2001, and
no-one has noticed or cared to fix it.

More kernels SYMTAB_SPACE increased.

branches: 1.52.2; 1.52.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.51.6; 1.51.10;
Bump SYMTAB_SPACE so that it fits again.

branches: 1.50.4; 1.50.8; 1.50.10; 1.50.16;
Bump SYMTAB_SPACE so that it fits again.
Hm, this port doesn't error out the build if it doesn't...

branches: 1.49.2; 1.49.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.48.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.46.2; 1.46.4; 1.46.6;
Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add (commented out) IPSEC_NAT_T option.

branches: 1.40.2; 1.40.4;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.36.4; 1.36.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.33.2;
Uppercase CPU, plural is CPUs.

Bump SYMTAB_SPACE so that the symbol table fits again.

As suggested by Jason Thorpe, rename m41t to m41trtc.

Add i2c and the m41t00 RTC on the i2c bus.

increase SYMTAB_SPACE.

Add COMPAT_16 to most arm based kernels. Mainly in preperation for doing
SA_SIGINFO work.

Default all builds to not have debug information. Significantly
reduces disk space needed for a make release, especially if using
dwarf2 debug.

branches: 1.26.2;
Use CPUFLAGS rather than COPTS to pass -mcpu=xscale.

Add ksyms.

Bump SYMTAB_SPACE a little.

Use indirect configuration for on-board devices (i.e. those things
attached to "obio") on the IQ80310 and IQ80321. It makes more sense
to do it this way for this type of system (the goal being to encapsulate
as much information about the board as possible into one file).

enable USERCONF by default; it's small and extremely useful to have available.

Put PERFCTRS under "Development and Debugging options".

Don't need SOSEND_LOAN here anymore.

Disable coalesced writes on IOP310-based systems.

Add a new option EVBARM_BOARDTYPE to differentiate between different
evbarm ports. Inline _splraise/_spllower/splx for i80321 and iq80310
for more performance.

Use -mcpu=xscale.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.15.2; 1.15.4;
Switch to esiop by default (again); it is fully-baked enough to use
in production now.

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

XSCALE_CCLKCFG should not be set in std.iq80310. Set IQ80310 to use
XSCALE_CCLKCFG=9 (733MHz) and TEAMASA_NPWR to use XSCALE_CCLKCFG=7 (600MHz)
as that's what the part on the board is rated for.

Go back to siop; esiop isn't fully baked yet.

Use esiop.

Enable new option SIOP_SYMLED

Enable ext2fs and RAIDframe.

Add a "netbsd-sd0" configuration.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

Restructure a few things in order to support other XScale core
I/O processors:
* The i80200 and the i80321 have the same CPU ID, so split the
CPU_XSCALE option into CPU_XSCALE_80200 and CPU_XSCALE_80321
options, and don't let them both be defined at the same time.
XXX May want to revisit this in the future.
* Split some registers common between the i80200 and i80321 into
<arm/xscale/xscalereg.h>.
* Rename a few existing functions.

branches: 1.4.2;
* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

branches: 1.3.2;
* No need to specify the console speed anymore; it defaults to the
correct speed if IOP310_TEAMASA_NPWR is defined.
* Just wildcard the "wm" and "siop" devices.
* Comment out raid and ccd for now.

finish conversion from TEAMASA_NPWR to IOP310_TEAMASA_NPWR

Add support for the Team ASA Npwr IOP310-based server appliance.