Do not call setroot() from MD code and from MI code, which has
unwanted sideeffects in the RB_ASKNAME case. This fixes PR/46732.

No longer wrap MD cpu_rootconf(), as hp300 port stores reboot information
as a side effect. Instead call MI rootconf() from MD code which makes
rootconf() now a wrapper to setroot().

Adjust several MD routines to set the global booted_device,booted_partition
variables instead of passing partial information to setroot().

Make cpu_rootconf(9) describe the calling order.

branches: 1.10.2; 1.10.8;
Revamp / rework the Atheros MIPS SoC support. Add initial support for the
AR71xx (MIPS 24K core) SoC and the AR9344 (MIPS 74K core) SoC. Force use
of -mips32 for all Atheros kernels. Make code much more common.

Remove clause 3 and 4 from TNF licenses

branches: 1.8.6; 1.8.8; 1.8.10;
Fix headers.

branches: 1.7.28; 1.7.34; 1.7.42;
Defer _spl0() or _splnone() calls (which enable hardware interrupts)
from cpu_configure(9) to cpu_initclocks(9) on mips ports which use
mips3_clockintr.c:mips3_clockintr() (i.e. CPU INT5 clock) to avoid
hardclock(9) before softclock interrupt is initialized in initclocks().
This should be harmless because initclocks() is a part of configure()
in these days and there is no MI function which expects hardware
interrupts between cpu_configure(9) and cpu_initclocks(9).

Disccussed on tech-kern and port-mips.

branches: 1.6.2; 1.6.4; 1.6.6;
This is a boat-load of changes designed to finish parameterizing the
stuff necessary to separate out AR5312 from AR5315. This includes:

1) rework of arbus IRQs, so that IRQs are now seperately specified
as either MISC or CPU irqs
2) move board/chip-specific addresses into chip-dependent file
3) unencumber argpio from ar5312 specifics, using properties to pass
details such as reset-pin and sysled-pin.
4) an option to select which WiSoC is to be configured is provided.

AR5315 support should be forthcoming shortly now.

First pass at cleanup AR5312 WiSoC support to enable better & cleaner
sharing of code with the AR5315, which has many similarities, but many
differences from the AR5312.

No functional change at this time, other than the cpu_model string
(and also sysctl.hw.model node) is changed to reflect the WiSoC cpu
name rather than the identification string in ROM (which tends to not
be very informative.)

branches: 1.4.4;
Import new HAL 0.9.17.2. Approved by sam@

New HAL includes some driver changes to register accesses.
Adds support for WLAN devices on AR5312 family devices.
Adds support 32-bit SPARC ath devices (untested).
ath enabled in SPARC64 GENERIC builds.
This HAL is tested and known to work for i386 PCI devices, SPARC64 PCI devices,
and AR5312 WiSoC devices. MIPS PCI devices appear to be busted (possibly only
on Alchemy hardware, unconfirmed), and cardbus support is untested due to
lack of test hardware.

Please report any new problems with this import to garrett@.

branches: 1.3.2;
integrate kauth.

Remove the devprop API and switch everthing over to the new proplib. Add
a new device_properties() accessor for device_t that returns the device's
property dictionary.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Initial import of Atheros AR531X SoC support. Currently the onboard ethernet
and serial ports are supported, and the system appears stable with an NFS
mounted root. An earlier version of the code was reviewed by simon@, but it
has since had numerous improvements and cleanups.


At the moment, only AR5312 is known to work, but I suspect AR2313 will work
as well. Later 2315/2316 parts are substantially different, and are not yet
supported. Wifi and Marvell switch support found on some designs are not yet
supported.

Platforms known to include AR5312 include Senao Aries 2 (AP5054) and Netgear
WGU624.