History log of /src/sys/arch/evbppc/conf/TWRP1025 |
Revision | | Date | Author | Comments |
1.31 |
| 29-Jan-2024 |
christos | PR/57889: Ricardo Branco: ext2fs does not have user immutable and append file flags, only system ones. Restrict those to the superuser. Before the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the default.
|
1.30 |
| 09-Feb-2023 |
abs | Adjust _all_ cinclude of *.local files
- Ensure always at end - Use tab rather than spaces - Add consistent comment "Pull in optional local configuration - always at end"
The only functional change is that a local file which tried to override an existing setting (eg with "no foo") would have failed in some cases before, but now will work
|
1.29 |
| 29-Sep-2022 |
riastradh | swwdog(4): Add to GENERIC kernels.
Plus a handful of others that I'm familiar with. Lots of special- purpose kernels should probably have this too but I'm not going through all the arm, mips, and ppc evaluation board kernels to see which ones are relevant.
Omitted from systems I know to be very small: - sun2/GENERIC - dreamcast/GENERIC Feel free to remove it from others that need to be kept smaller.
Compile-tested a few of these just in case: - alpha/GENERIC - amd64/GENERIC - evbmips/OCTEON - i386/GENERIC - riscv/GENERIC
PR kern/29702
|
1.28 |
| 07-Aug-2022 |
simonb | UFS/LFS dirhash: - Enable UFS_DIRHASH if the architecture or kernel model specific config file can use 128MB of RAM or more. - Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel and by a number of NetBSD developers for years. - Add LFS_DIRHASH if LFS was enabled. - Be somewhat consistent with FS options order.
|
1.27 |
| 26-Apr-2019 |
sevan | Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs. On ports without a GENERIC kernel config enable in individul files, e.g evbmips. Omit on: atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k, mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource constraints or port infancy.
|
1.26 |
| 01-Aug-2018 |
maxv | Unreference IPF/PF from all the config files, and enable NPF instead when wanted. This also fixes some inconsistencies I saw in several files (eg IPF options while IPF was not compiled, IPF+PF enabled by default, etc).
|
1.25 |
| 05-Feb-2018 |
maxv | branches: 1.25.2; 1.25.4; Nuke DIRECTED_BROADCAST, it is not documented and not enabled anywhere. It probably wouldn't have built correctly anyway, since there is no associated defflag.
These ten lines of code in ip_input.c already look a lot better.
|
1.24 |
| 14-Sep-2017 |
mrg | clean up COMPAT_* options for native netbsd code: - new series of files that are useful for saying "i want everything since netbsd 1.4", etc. - use the fact COMPAT_* options have future dependancies to remove many redundant options.
removes about 3000 lines total across kernel configuration files. tested about 30 random kernels in the changed list.
|
1.23 |
| 29-Jul-2017 |
maxv | Remove TCP_COMPAT_42 from the config files. Pass 3.
|
1.22 |
| 19-Feb-2017 |
rin | PR kern/51208 Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for ALL on amd64 and i386.
|
1.21 |
| 26-Jun-2015 |
matt | branches: 1.21.2; 1.21.4; Add cinlude TWRP1025.local
|
1.20 |
| 30-Jan-2015 |
nonaka | Added lockstat
|
1.19 |
| 26-Dec-2014 |
nonaka | Uncommented out INET6.
|
1.18 |
| 24-Aug-2014 |
jnemeth | branches: 1.18.2; Create an "options MODULAR_DEFAULT_AUTOLOAD" config option and add it to all kernel configs that contain "options MODULAR". This option turns on module autoloading by default (which is the current default). This allows people who don't want module autoloading on by default to disable it by simply removing/commentting this line.
|
1.17 |
| 23-Aug-2014 |
dholland | Systematize (and in many cases, fix) the comments on options COMPAT_NN.
There are quite a few configs that are missing some COMPAT_NN options in ways that don't make sense; this should probably get cleaned up too, but for the time being I've not added or removed anything.
|
1.16 |
| 17-Aug-2014 |
joerg | Reorganize symbol table embedding. The existing option SYMTAB_SPACE is replaced by the make option COPY_SYMTAB set to any value. The copy of the symbol table is no longer put into a buffer in kern_ksyms.o, but a small helper object. This object is build first with a dummy size, then the kernel is linked to compute the real dimension of the symbol table buffer. After that, the helper object is rebuild and the kernel linked again.
|
1.15 |
| 16-Aug-2014 |
apb | Add "options COMPAT_70" to all kernel configuration files that already had "options COMPAT_60".
|
1.14 |
| 06-Mar-2014 |
joerg | branches: 1.14.4; Add config variant for root-on-SD.
|
1.13 |
| 06-Mar-2014 |
matt | Add options MODULAR
|
1.12 |
| 30-Jun-2013 |
rmind | G/C PFIL_HOOKS from the kernel configs.
|
1.11 |
| 05-Jun-2013 |
christos | branches: 1.11.2; remove obsolete networking options
|
1.10 |
| 02-Mar-2013 |
christos | Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.
|
1.9 |
| 01-Mar-2013 |
joerg | Retire OSI network stack. OK core@
|
1.8 |
| 17-Oct-2012 |
apb | branches: 1.8.2; Add "options COMPAT_60" to all kernel configuration files that already had "options COMPAT_50".
|
1.7 |
| 17-Aug-2012 |
abs | branches: 1.7.2; Update all kernel configs mentioning WSEMUL_* but not already including WSDISPLAY_COMPAT_USL using the following rules: - If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL - If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1 and commented out WSDISPLAY_COMPAT_USL - Otherwise add WSDISPLAY_COMPAT_USL
Some of the INSTALL configs for larger memory machines are probably suitable for adding WSDISPLAY_COMPAT_USL.
Now wsconscfg(8) should be able to switch VTs when expected.
Implemented after no objection from tech-kern to the following:
On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote: > wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual > terminals. > > Except when in an exceptionally memory or space constrained > environment (INSTALL being the obvious case), is there any reason why > all GENERIC and GENERIC-like kernels which have wscons enabled > shouldn't also have WSDISPLAY_COMPAT_USL?
|
1.6 |
| 24-Jul-2012 |
matt | Add drvctl
|
1.5 |
| 22-Jul-2012 |
matt | Split mdio/mii access into its own "device" and update accordingly. (on the P1025 the mdio functionality is separate from the etsec functions). Provide locking for mii access.
|
1.4 |
| 18-Jul-2012 |
matt | This has a 64MB NOR, not 16MB.
|
1.3 |
| 18-Jul-2012 |
matt | Add gpt/dkwedge support. Cleanup a few options <sp><tab> problems
|
1.2 |
| 17-Jul-2012 |
matt | The ETSEC on the P1025 has been moved/split so the MDIO stayed in the same place but each ETSEC has been split into two virtual halves (G0 and G1) and each one has a new different base address. For some reason, tsec1 connects to phy 2 and tsec2 connects to phy 1. Adjust config file to match
|
1.1 |
| 15-Jul-2012 |
matt | Add support for the Freescale TWR-P1025 evaluation board and the P1025/P1016 QorIQ processors. XXX tsec isn't working yet on the TWR-P1025.
|
1.7.2.4 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
1.7.2.3 |
| 20-Aug-2014 |
tls | Rebase to HEAD as of a few days ago.
|
1.7.2.2 |
| 23-Jun-2013 |
tls | resync from head
|
1.7.2.1 |
| 20-Nov-2012 |
tls | Resync to 2012-11-19 00:00:00 UTC
|
1.8.2.3 |
| 22-May-2014 |
yamt | sync with head.
for a reference, the tree before this commit was tagged as yamt-pagecache-tag8.
this commit was splitted into small chunks to avoid a limitation of cvs. ("Protocol error: too many arguments")
|
1.8.2.2 |
| 30-Oct-2012 |
yamt | sync with head
|
1.8.2.1 |
| 17-Oct-2012 |
yamt | file TWRP1025 was added on branch yamt-pagecache on 2012-10-30 17:19:30 +0000
|
1.11.2.2 |
| 18-May-2014 |
rmind | sync with head
|
1.11.2.1 |
| 28-Aug-2013 |
rmind | sync with head
|
1.14.4.1 |
| 15-May-2015 |
snj | Pull up following revision(s) (requested by jnemeth in ticket #762): share/man/man4/options.4: revision 1.442 sys/arch/amd64/conf/ALL: revision 1.18 sys/arch/amd64/conf/GENERIC: revision 1.396 sys/arch/dreamcast/conf/GENERIC: revision 1.119 sys/arch/epoc32/conf/GENERIC: revision 1.6 sys/arch/evbarm/conf/BCM5301X: revision 1.24 sys/arch/evbarm/conf/BCM56340: revision 1.9 sys/arch/evbarm/conf/IMX23_OLINUXINO: revision 1.9 sys/arch/evbarm/conf/std.beagle: revision 1.13 sys/arch/evbarm/conf/std.kobo: revision 1.2 sys/arch/evbarm/conf/std.netwalker: revision 1.10 sys/arch/evbppc/conf/P2020DS: revision 1.25 sys/arch/evbppc/conf/RB800: revision 1.30 sys/arch/evbppc/conf/TWRP1025: revision 1.18 sys/arch/hp300/conf/GENERIC: revision 1.187 sys/arch/hpcsh/conf/GENERIC: revision 1.104 sys/arch/i386/conf/GENERIC: revision 1.1111 sys/arch/i386/conf/MONOLITHIC: revision 1.17 sys/arch/landisk/conf/GENERIC: revision 1.43 sys/arch/luna68k/conf/GENERIC: revision 1.117 sys/arch/macppc/conf/GENERIC: revision 1.316 sys/arch/macppc/conf/GENERIC_601: revision 1.5 sys/arch/mmeye/conf/MMEYE_WLF: revision 1.16 sys/arch/news68k/conf/GENERIC: revision 1.123 sys/arch/sandpoint/conf/GENERIC: revision 1.85 sys/arch/shark/conf/GENERIC: revision 1.119 sys/arch/sparc/conf/GENERIC: revision 1.246 sys/arch/sparc64/conf/GENERIC: revision 1.174 sys/arch/sun3/conf/GENERIC3X: revision 1.125 sys/arch/sun3/conf/GENERIC: revision 1.169 sys/arch/x68k/conf/GENERIC: revision 1.177 sys/arch/zaurus/conf/GENERIC: revision 1.62 sys/conf/files: revision 1.1099 sys/kern/kern_module.c: revisions 1.98, 1.99 Create an "options MODULAR_DEFAULT_AUTOLOAD" config option and add it to all kernel configs that contain "options MODULAR". This option turns on module autoloading by default (which is the current default). This allows people who don't want module autoloading on by default to disable it by simply removing/commentting this line. -- fix typo. (s/MODULE_DEFAULT_AUTOLOAD/MODULAR_DEFAULT_AUTOLOAD/)
|
1.18.2.3 |
| 28-Aug-2017 |
skrll | Sync with HEAD
|
1.18.2.2 |
| 22-Sep-2015 |
skrll | Sync with HEAD
|
1.18.2.1 |
| 06-Apr-2015 |
skrll | Sync with HEAD
|
1.21.4.1 |
| 21-Apr-2017 |
bouyer | Sync with HEAD
|
1.21.2.1 |
| 20-Mar-2017 |
pgoyette | Sync with HEAD
|
1.25.4.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
1.25.2.1 |
| 06-Sep-2018 |
pgoyette | Sync with HEAD
Resolve a couple of conflicts (result of the uimin/uimax changes)
|