PMAP_DEBUG has been deleted on arm

branches: 1.104.4;
Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.103.4;
Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.101.2; 1.101.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Set the relevant options to build a kernel with the necessary components to
support DTrace on the Jornada 710/720 devices.
- Modular
- Built with DTrace hooks and full symbol table

The the MII/PHY section. It's not technically possible for this hardware to run on this system.

branches: 1.97.2; 1.97.4;
Remove KMEMSTATS.

branches: 1.96.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add COMPAT_NETBSD32, following the switch to eabi by default.

branches: 1.94.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.93.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Remove "#options ARMFPE"

branches: 1.87.2;
Ensure all WSDISPLAY_COMPAT_USL entries have same comment

P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.84.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.83.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.81.2; 1.81.4;
Add options P1003_1B_SEMAPHORE.

Remove unused count from pseudo-device md.

If options RTC_OFFSET is not specified use bootinfo->timezone passed
by hpcboot.exe as well as other hpc* ports. Noticed by uwe@.
Also comment out options RTC_OFFSET=0 lines and note about this
in kernel config files. Tested on WS003SH.

XXX: dup code among pxa2x0_hpc_machdep.c and sa11x0_hpc_machdep.c

add btmagic(4) where other Bluetooth drivers are listed

Added Sharp W-ZERO3 series support.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.75.2; 1.75.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.73.2;
remove esl (KIYOHARA Takashi)

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.70.2; 1.70.4;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.69.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.68.6; 1.68.8; 1.68.10; 1.68.12;
Remove arm support for IPKDB.

It hasn't worked since arm was broken out from arm32 in Jan 2001, and
no-one has noticed or cared to fix it.

branches: 1.67.6;
Add bcsp(4).

branches: 1.66.2;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.65.2;
Add btbc(4).

branches: 1.64.2; 1.64.10; 1.64.14; 1.64.16; 1.64.18;
Add btuart(4).

branches: 1.63.2;
move devices entry to MD/conf/files.*
catch up to current kernel configuration

Remove tmpfs's experimental status. OK'ed by core@.

Add support for touches on the HP hard icons, mostly copied from hpcsh but
also with support for raw kbd (for X).

No objection on port-hpcarm.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.59.2; 1.59.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Implement pmap_devmap on hpcarm to map I/O registers that are used
in early start-up stage. Change the virtual address for UART #3 to
the physical address in the configuration files.
While here, implement the sa11x0_bs_unmap function.

Reviewed by Toru Nishimura (on port-arm).

Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.56.2; 1.56.4; 1.56.6;
Remove pioc device and all devices that attach to it (were commented out
anyway).

Comment out options DIAGNOSTIC.

Add file-systems TMPFS and UDF, commented out.

Split the Jornada 7xx drivers for the touch-panel, keyboard, lcd control
and power management into multiple files. This removes some dirty hacks
and improves the quality of the code.

- j720kbd.c - keyboard driver
* Converted to use the hpckbd(4) interface.
* Remove the old keymap file since it's no longer used.

- j720lcd.c - lcd brightness/control/power control

- j720pwr.c - power management
* Converted to use the hpcapm(4) interface.
* Fix the battery charge status. The values are non-linear so in order
to display a reasonable charge status we use a few charge points in
a table and interpolate between that.

- j720tp.c - touch-panel driver

- j720ssp.c - SSP port (on the SA-1110)

Many thanks to cube@ and uwe@ for providing useful feedback and reviewing
the changes.

Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.50.2; 1.50.4;
Add (commented out) options for color customization.
Enable customized output by default.

branches: 1.49.2;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

- Remove options PORTMASTER (not used any code).
- Add (commented out) options DEBUG.
- Add "pseudo-device ksyms".

branches: 1.46.2;
Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add (commented out) IPSEC_NAT_T option.

branches: 1.41.2; 1.41.4;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.37.4; 1.37.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.34.2;
Uppercase CPU where appropriate.

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

Add COMPAT_16 to most arm based kernels. Mainly in preperation for doing
SA_SIGINFO work.

branches: 1.30.2;
no iic, thus no rtc@iic, thus no todclock@rtc.

Added commented out cgd(4)s to GENERIC configs.

enable USERCONF by default; it's small and extremely useful to have available.

Fix a config mistake for wsmouse

Enable two WSDISPLAY options needed by the X server

Added a commented out J720KBD_LAYOUT option, to show how default keymap can
be changed.

Support jornada720 touchpanel.

Added PHY to the config file so that most PCMCIA ethernet board will work.

Comment out MEMORY_DISK_HOOKS as a workarund for the following problem.
hpcarm has a bug which prevents booting if kernel text+data size exceeds
3.75MB.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.20.2; 1.20.4;
Remove CPU_SA110 option.

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Delete option SAIP; nothing tests it.

Eliminate all #ifdef HPCARM, and delete the option.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.11.2;
The wsmux pseudo device does not need a count anymore.

branches: 1.10.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Enable a bunch of PCMCIA network cards. They cannot be tested before
enabling.

Add jornada720 keyboard device.

Remove obsolete BOOTINFO_FB_* workaround.

Nuke FRAMEBUF_HW_BASE. This value is provided by the bootloader.

Add support for jornada720's framebuffer.

The functionality is almost same as bivideo, and hardware rasops and
power saving are not yet supported.

Add some PCMCIA devices.

branches: 1.3.2; 1.3.4;
Use hardware address for saost.

change com-speed to 19200.
default com-speed of hpcboot are 19200

hpcarm:
kernel for StrongARM-based WinCE PDA machine.