Bump DFLSSIZ from 512KB to 2MB on all hp300 pmap m68k ports.

Some modern applications could require 512KB buffer on stack and
no particular comment on port-m68k@:
https://mail-index.netbsd.org/port-m68k/2025/02/02/msg000893.html

branches: 1.25.2;
fix recently committed typos by msaitoh in few more places, as well as few more.
mainly s/contigous/contiguous/ and s/miliseconds/milliseconds/ in comments.

TAB/space/indent cleanup.

Add MAX/MIN PAGE_SIZE and PAGE_SHIFT definitions of m68k for jemalloc(3).

Background:
- All m68k ports have fixed PAGE_SIZE value in their kernels,
but each port uses different PAGE_SIZE value (4096 or 8192)
due to historical reasons.
- Currently module(7) binaries are built per each port so
all m68k kernel sources don't support run-time variable PAGE_SIZE.
- MI <uvm/uvm_param.h> assumes that the port supports a variable
PAGE_SIZE on module(7) builds if both MAX_PAGE_SIZE and MIN_PAGE_SIZE
are defined and they have different values.
- On the other hand, jemalloc(3) checks MAX_PAGE_SHIFT in
src/external/bsd/jemalloc/include/jemalloc/internal/jemalloc_internal_defs.h
for internal optimization.
- m68k ports share userland binaries (especially pkgsrc binaries)
among all ports, so we need to define MAX_PAGE_SHIFT as 13 to
support m68k ports where PAGE_SIZE==8192.
(though this would affect only if static binaries built on
4k page hosts are executed on 8k page hosts)

To solve these inconsistency on PAGE_SIZE definitions,
we should have an independent PAGE_SIZE related definitions
for userland, but it requires major reorganization.
For now (especially for netbsd-9) we define MAX/MIN PAGE_SIZE and
PAGE_SHIFT values in <m68k/vmparam.h> only in !defined(_KERNEL) case.

Discussed on source-changes-d@ and tech-kern@ with christos@ and thorpej@:
https://mail-index.netbsd.org/source-changes-d/2020/01/thread1.html#012035
https://mail-index.netbsd.org/tech-kern/2020/01/thread1.html#025954

Should be pulled up to netbsd-9.

branches: 1.22.2; 1.22.4;
Fix lingering page size comments.

Pointed out by christos@ on port-m68k@:
http://mail-index.netbsd.org/port-m68k/2019/06/06/msg000726.html

XXX: we also need MAX_PAGE_SIZE in somewhere for newer jemalloc?

branches: 1.21.14;
PR port-mac68k/51923
Bump default MAXTSIZ to 32MB for m68k ports, which allos us to use GCC 5.4 on
GENERIC kernels.
Ok jklos

PR port-mac68k/51923
Remove unused SYSPTSIZE and USRPTSIZE from m68k ports.
Ok jklos

branches: 1.19.4; 1.19.8; 1.19.12;
Sync VM_MAXUSER_ADDRESS and VM_MAX_ADDRESS with other hp300 derived ports.

There is no particular reason to have different values among m68k ports.
Briefly checked on LUNA-II.

branches: 1.18.14; 1.18.28;
Remove clause 3 (UCB advertising clause) from the University of Utah
copyright. Confirmed by Mike Hibler, mike at cs.utah.edu - thanks!
Also, merge UCB and Utah copyright texts back into one, as they
originally were.

Extra verification by snj@.

branches: 1.17.2; 1.17.4;
Remove incomplete, never worked dynamic run-time memory registration
(uvm_page_physload(9)). This functionality will be re-added later.

branches: 1.16.2;
Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.

branches: 1.15.2;
Define SYSMAP_VA in <m68k/pmap_motorola.h>
where the Sysmap pointer is declared.

Use PGSHIFT from <machine/param.h> for PAGE_SHIFT.
We can assume PGSHIFT is always constant on current
m68k pmap_motorola implementation.
Also fix some leftover HP300 comments on some ports.

Minor tweak to the pv_table management in the Hibler-derived m68k pmaps:
The head of the list is now a pv_header, which contains the first pv_entry
as well as a 16-bit attributes field (replaces the pmap_attributes array
plus the pv_entry::pv_flags field) as a 16-bit count of caller-specified
cache-inhibited mappings.

Tested on hp300 (shared pmap_motorola.c), changes to atari and amiga copies
are purely mechanical.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.11.78; 1.11.86; 1.11.92;
merge ktrace-lwp.

merge yamt-km branch.
- don't use managed mappings/backing objects for wired memory allocations.
save some resources like pv_entry. also fix (most of) PR/27030.
- simplify kernel memory management API.
- simplify pmap bootstrap of some ports.
- some related cleanups.

branches: 1.9.8; 1.9.10;
Move UCB-licensed code from 4-clause to 3-clause licence.

Patches provided by Joel Baker in PR 22364, verified by myself.

branches: 1.8.2;
Use PAGE_SIZE rather than NBPG.

Make PAGE_SIZE, PAGE_SHIFT, and PAGE_MASK compile-time constants on
luna68k.

Use __LDPGSZ (which must be == USRTEXT) as the text address for a.out
executables, and eliminate the USRTEXT constant, which was only used
by the a.out exec code.

MAXSLP is defined to be a machine-independent scheduling parameter,
so move it into sys/param.h.

branches: 1.4.2; 1.4.8;
Per discussion w/ chuck and chuck, restructure the md page stuff
to use a structure called "vm_page_md", and use __HAVE_VM_PAGE_MD
and __HAVE_PMAP_PHYSSEG.

Add a VM_MDPAGE_MEMBERS macro that defines pmap-specific data for
each vm_page structure. Add a VM_MDPAGE_INIT() macro to init this
data when pages are initialized by UVM. These macros are mandatory,
but ports may #define them to nothing if they are not needed/used.

This deprecates struct pmap_physseg. As a transitional measure,
allow a port to #define PMAP_PHYSSEG so that it can continue to
use it until its pmap is converted to use VM_MDPAGE_MEMBERS.

Use all this stuff to eliminate a lot of extra work in the Alpha
pmap module (it's smaller and faster now). Changes to other pmap
modules will follow.

branches: 1.2.6; 1.2.8;
Update for the NKMEMPAGES changes.

Introduce NetBSD/luna68k port into CVS repository.