Introduce a flag to disable PDMA when writing.

The use of pdma when writing would always cause a panic on my Powerbook 160,
possibly others as well.

As posted to tech-kern.

Add explanation for the sbc flags to the kernel configurations that
use the sbc 53c80 driver. Until now, this information has lived in the
source code, only; neither sbc nor ncrscsi have a man page.

Triggered by PR port-mac68k/2921

branches: 1.55.52;
The {GENERIC,INSTALL}SBC kernel configurations are out of sync with
the vanilla ones. They are supposed to be identical to
{GENERIC,INSTALL}, apart from the different ncr5380 driver.
Instead of re-sync'ing, use a new feature of configure and just disable
the ncrscsi driver.

(Approved by Allen Briggs)

branches: 1.54.2; 1.54.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.52.2; 1.52.4; 1.52.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.50.2; 1.50.4; 1.50.6;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.42.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

branches: 1.41.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.36.2;
only one of the obio locators was actually used, so get rid of the others
and collapse the two variations of obio into one. use the remaining locator
("addr") to differentiate the two possible esp and sbc devices (instead of
using the unit number).

Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.34.4;
Add COMPAT_BSDPTY on all the kernels that have COMPAT options.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.27.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

add COMPAT_15/COMPAT_16

branches: 1.24.2;
Bye Bye UCONSOLE

Added commented out cgd(4)s to GENERIC configs.

Add one space between "#option" and "<tab>IPFILTER_DEFAULT_BLOCK"

Added (commented out) IPFILTER_DEFAULT_BLOCK.

enable USERCONF by default; it's small and extremely useful to have available.

add netdock driver.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.17.2; 1.17.4;
Add IDE drive support.

Note:
(1) Character device major number chages to 49 from 48(in my original
code). So it is necessary to rebuild device files.
(2) Must use Booter 2.0.0a10 or later.
(3) Default mode is cpu busy wait. It is defined by flags 0x1000.
It will be more slow than before.
No flags means hardware interrupt mode. But it might be able to
get no interrupts.

Support machines:
(1) Quadra 630 series
(2) PowerBook 150

Non tested machine:
(1) PowerBook 190 series

Approved by: briggs

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

branches: 1.14.2;
Switch mac68k to ELF. Now the default executable binaries are ELF.

Approved by Scott,briggs,fredb,wormey

Forgot one -- `options COMPAT_15'.

Update the GENERIC and GENERICSBC kernels to conform to current fashion:

- - Disable `options DIAGNOSTIC' by default, as the checks are reported to
be not really cheap.
- - Add `options COMPAT_AOUT_M68K', commented out, in preparation for ELF.
- - Remove `options EXEC_ELF32' from the kernel config. You can't just
build an ELF kernel -- you need to update your toolchain, and then,
once you go ELF, it's not an option, so it needs to go in std.mac68k,
as on the other m68k ports.
- - Comment out `options COMPAT_SUNOS'. This hasn't been reported to work
for a long time, so it's not very useful in GENERIC.
- - Enable `options IPFILTER_LOG', to go along with the `options GATEWAY'
and `pseudo-device ipfilter' motif.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

The bridge(4) pseudo-device no longer requires the port to
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.5.4;
Sync with "GENERIC".

branches: 1.4.2;
Comment out bridge pseudo devices from ports that don't
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.

Add bridge pseudo devices to GENERIC configs

branches: 1.2.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

branches: 1.1.2;
Fix PR port-mac68k/11343