| History log of /src/sys/arch/mips/adm5120/dev/ahci.c |
| Revision | | Date | Author | Comments |
| 1.32 |
| 23-Oct-2022 |
skrll | Fix build from previous
|
| 1.31 |
| 09-Mar-2022 |
riastradh | usb: Provisionally release bus lock around ubm_rhctrl.
This isn't quite correct, but it avoids a deadlock:
- *_roothub_ctrl holds bus lock, waits in usb_delay_ms for kpause
- softint waits for bus lock, holds up kpause wakeup
The deadlock is new since recent changes to hold the bus lock over
upm_start/upm_transfer. Making this change regresses to other
problems:
- *_suspend/resume and *_roothub_ctrl often touch the same portsc
registers
- roothub_ctrl_abort needs to wait for ubm_rhctrl to complete.
When the bus lock was held across both, a noop served here, but we
can't hold the bus lock across both, so that doesn't work.
However, these problems -- which we've had for a long time -- seem to
be less bad than the deadlock. So let's avoid the deadlock for now
and then work out another way to serialize suspend/resume/rhctrl and
aborts.
Candidate fix for PR kern/56739.
|
| 1.30 |
| 03-Mar-2022 |
riastradh | usb: Hold pipe lock across upm_transfer and upm_start.
This simplifies the code and fixes races with abort. Access to the
pipe's queue is now done exclusively while the pipe is locked.
|
| 1.29 |
| 03-Mar-2022 |
riastradh | usb: Factor usb_insert_transfer out of upm_transfer and make private.
Almost every upm_transfer function starts with:
mutex_enter(&sc->sc_lock);
err = usb_insert_transfer(xfer);
mutex_exit(&sc->sc_lock);
if (err)
return err;
Some of them have debug messages sprinkled in here too, or assert
that err == USBD_NORMAL_COMPLETION (alternative is USBD_IN_PROGRESS,
only for pipes with up_running or up_serialise, presumably not
applicable for these types of pipes). Some of them also assert
xfer->ux_status == USBD_NOT_STARTED, which is guaranteed on entry and
preserved by usb_insert_transer.
Exceptions:
- arch/mips/adm5120/dev/ahci.c ahci_device_isoc_transfer just returns
USBD_NORMAL_COMPLETION, but I'm pretty sure this is and always has
been broken anyway, so won't make anything worse (if anything, might
make it better...)
- external/bsd/dwc2/dwc2.c dwc2_device_bulk_transfer and
dwc2_device_isoc_transfer _also_ issue dwc2_device_start(xfer)
under the lock. This is probably a better way to do it, but let's
do it uniformly across all HCIs at once.
- rump/dev/lib/libugenhc/ugenhc.c rumpusb_device_bulk_transfer
sometimes returns USBD_IN_PROGRESS _without_ queueing the transfer,
in the !rump_threads case. Not really sure how this is supposed to
work... If it actually breaks anything, we can figure it out.
|
| 1.28 |
| 21-Dec-2021 |
skrll | Change the usb_mem API to take a bus_dma_tag_t in usb_allocmem instead of
a struct usbd_bus *.
This allows an HCD to use more than one tag.
|
| 1.27 |
| 07-Dec-2021 |
skrll | Make this compile again.
|
| 1.26 |
| 04-Oct-2021 |
andvar | remove duplicate the article in comments.
|
| 1.25 |
| 07-Aug-2021 |
thorpej | Merge thorpej-cfargs2.
|
| 1.24 |
| 24-Apr-2021 |
thorpej | branches: 1.24.8;
Merge thorpej-cfargs branch:
Simplify and make extensible the config_search() / config_found() /
config_attach() interfaces: rather than having different variants for
which arguments you want pass along, just have a single call that
takes a variadic list of tag-value arguments.
Adjust all call sites:
- Simplify wherever possible; don't pass along arguments that aren't
actually needed.
- Don't be explicit about what interface attribute is attaching if
the device only has one. (More simplification.)
- Add a config_probe() function to be used in indirect configuiration
situations, making is visibly easier to see when indirect config is
in play, and allowing for future change in semantics. (As of now,
this is just a wrapper around config_match(), but that is an
implementation detail.)
Remove unnecessary or redundant interface attributes where they're not
needed.
There are currently 5 "cfargs" defined:
- CFARG_SUBMATCH (submatch function for direct config)
- CFARG_SEARCH (search function for indirect config)
- CFARG_IATTR (interface attribte)
- CFARG_LOCATORS (locators array)
- CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)
...and a sentinel value CFARG_EOL.
Add some extra sanity checking to ensure that interface attributes
aren't ambiguous.
Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark
ports to associate those device handles with device_t instance. This
will trickle trough to more places over time (need back-end for pre-OFW
Sun OBP; any others?).
|
| 1.23 |
| 05-Jan-2021 |
skrll | branches: 1.23.2;
Misc KNF. NFCI.
|
| 1.22 |
| 05-Apr-2020 |
skrll | branches: 1.22.4;
Switch USB to use non-coherent buffers for data transfers in the
same way as OpenBSD.
The use of coherent (uncacheable on ARM and other arches) mappings
for transfer buffers impacts performance, espcially where memcpys
are involved.
Audit the necessary usb_syncmem operations - a few were missing.
|
| 1.21 |
| 21-Feb-2020 |
skrll | Fix a memory leak. Spotted by nat@
|
| 1.20 |
| 15-Feb-2020 |
riastradh | Fix mistakes in previous sloppy change with root intr xfers.
- Make sure ux_status is set to USBD_IN_PROGRESS when started.
Otherwise, if it is still in flight when we abort the pipe,
usbd_ar_pipe will skip calling upm_abort.
- Initialize ux_status under the lock; in principle a completion
interrupt (or a delay) could race with the initialization.
- KASSERT that the xfer is in progress when we're about to complete
it.
Candidate fix for PR kern/54963 for other HCI drivers than uhci.
ok nick
ok phone
(This is the change that nick evidently MEANT to ok when he ok'd the
previous one!)
|
| 1.19 |
| 12-Feb-2020 |
riastradh | Fix steady state of root intr xfers.
Why?
- Avoid completing a root intr xfer multiple times in races.
- Avoid potential use-after-free in poll_hub callouts (uhci, ahci).
How?
- Use sc->sc_intr_xfer or equivalent to store only a pending xfer
that has not yet completed -- whether successfully, by timeout, or
by synchronous abort. When any of those happens, set it to null
under the lock, so the xfer is completed only once.
- For hci drivers that use a callout to poll the root hub (uhci, ahci):
. Pass the softc pointer, not the xfer, to the callout, so the
callout is not even tempted to use xfer after free -- if the
callout fires, but the xfer is synchronously aborted before the
callout can do anything, the xfer might be freed by the time the
callout starts to examine it.
. Teach the callout to do nothing if it is callout_pending after it
has fired. This way:
1. completion or synchronous abort can just callout_stop
2. start can just callout_schedule
If the callout had already fired before (1), and doesn't acquire
the bus lock until after (2), it may be tempted to abort the new
root intr xfer just after submission, which would be wrong -- so
instead we just have the callout do nothing if it notices it has
been rescheduled, since it will fire again after the appropriate
time has elapsed.
|
| 1.18 |
| 12-Feb-2020 |
riastradh | Factor out HCI-independent xfer completion logic.
New API for HCI drivers to synchronize hardware completion
interrupts, synchronous aborts, and asynchronous timeouts:
- When submitting an xfer to hardware, call
usbd_xfer_schedule_timeout(xfer).
- On HCI completion interrupt for xfer completion:
if (!usbd_xfer_trycomplete(xfer))
return; /* timed out or aborted, ignore it */
- In upm_abort methods, call usbd_xfer_abort(xfer).
For HCI drivers that use this API (not needed in drivers that don't,
or for xfers like root intr xfers that don't use it):
- New ubm_abortx method serves role of former *hci_abort_xfer, but
without any logic for wrangling timeouts/callouts/tasks -- caller
in usbd_xfer_abort has already handled them.
- New ubm_dying method, returns true if the device is in the process
of detaching, used by the timeout logic.
Converted and tested:
- ehci
- ohci
Converted and compile-tested:
- ahci (XXX did this ever work?)
- dwc2
- motg (XXX missing usbd_xfer_schedule_timeout in motg_*_start?)
- uhci
- xhci
Not changed:
- slhci (sys/dev/ic/sl811hs.c) -- doesn't use a separate per-xfer
callout for timeouts (XXX but maybe should?)
- ugenhc (sys/rump/dev/lib/libugenhc/ugenhc.c) -- doesn't manage its
own transfer timeouts
- vhci -- times transfers out only on detach; could be adapted easily
if we wanted to use the xfer->ux_callout
|
| 1.17 |
| 17-Feb-2019 |
rin | branches: 1.17.4; 1.17.6;
Fix assertion failures triggered by usbdi.c,v 1.182, when devices
are detached.
This is because xfers of USBD_NOT_STARTED can be removed from queue
in an invisible way to host controller drivers.
Discussed on tech-kern.
|
| 1.16 |
| 03-Sep-2018 |
riastradh | Rename min/max -> uimin/uimax for better honesty.
These functions are defined on unsigned int. The generic name
min/max should not silently truncate to 32 bits on 64-bit systems.
This is purely a name change -- no functional change intended.
HOWEVER! Some subsystems have
#define min(a, b) ((a) < (b) ? (a) : (b))
#define max(a, b) ((a) > (b) ? (a) : (b))
even though our standard name for that is MIN/MAX. Although these
may invite multiple evaluation bugs, these do _not_ cause integer
truncation.
To avoid `fixing' these cases, I first changed the name in libkern,
and then compile-tested every file where min/max occurred in order to
confirm that it failed -- and thus confirm that nothing shadowed
min/max -- before changing it.
I have left a handful of bootloaders that are too annoying to
compile-test, and some dead code:
cobalt ews4800mips hp300 hppa ia64 luna68k vax
acorn32/if_ie.c (not included in any kernels)
macppc/if_gm.c (superseded by gem(4))
It should be easy to fix the fallout once identified -- this way of
doing things fails safe, and the goal here, after all, is to _avoid_
silent integer truncations, not introduce them.
Maybe one day we can reintroduce min/max as type-generic things that
never silently truncate. But we should avoid doing that for a while,
so that existing code has a chance to be detected by the compiler for
conversion to uimin/uimax without changing the semantics until we can
properly audit it all. (Who knows, maybe in some cases integer
truncation is actually intended!)
|
| 1.15 |
| 09-Apr-2018 |
jakllsch | branches: 1.15.2;
Stop potential misuse of vendor names and USB vendor IDs in root hub
device and string descriptors.
Firstly: Few vendors have identical PCI-SIG vendor IDs and USB-IF vendor
IDs. As such, using the PCI vendor ID as a USB vendor ID may trample
on whomever is allocated that USB vendor ID.
Secondly: The vendor of the host controller hardware implementation has
little to nothing to do with our usbroothub implementation. Thus we
should not potentially associate any problems therewith to such third
party.
This change will result in root hubs being identified by USB Vendor ID
0x0000. Root hub vendor string will now be "NetBSD" (or, specifically:
ostype). Product ID (0x0000) and product strings remain unchanged.
|
| 1.14 |
| 01-Jun-2017 |
chs | branches: 1.14.2; 1.14.8;
remove checks for failure after memory allocation calls that cannot fail:
kmem_alloc() with KM_SLEEP
kmem_zalloc() with KM_SLEEP
percpu_alloc()
pserialize_create()
psref_class_create()
all of these paths include an assertion that the allocation has not failed,
so callers should not assert that again.
|
| 1.13 |
| 23-Apr-2016 |
skrll | Merge nick-nhusb
- API / infrastructure changes to support memory management changes.
- Memory management improvements and bug fixes.
- HCDs should now be MP safe
- conversion to KERNHIST based debug
- FS/LS isoc support on ehci(4).
- conversion to kmem(9)
- Some USB 3 support - mostly from Takahiro HAYASHI (t-hash).
- interrupt transfers now get proper DMA operations
- general bug fixes
- kern/48308
- uhub status notification improvements
- umass(4) probe fix (applied to HEAD already)
- ohci(4) short transfer fix
|
| 1.12 |
| 22-Sep-2013 |
skrll | branches: 1.12.4; 1.12.6; 1.12.10;
Adapt to usbmp. Compile tested only.
Did this ever work?
|
| 1.11 |
| 22-Sep-2013 |
skrll | Remove trailing whitespace.
|
| 1.10 |
| 02-Sep-2013 |
skrll | Use C99 designated initializers.
|
| 1.9 |
| 27-Oct-2012 |
chs | branches: 1.9.2;
split device_t/softc for all remaining drivers.
replace "struct device *" with "device_t".
use device_xname(), device_unit(), etc.
|
| 1.8 |
| 11-Mar-2012 |
mrg | branches: 1.8.2;
pull down from usbmp branch:
- remove usbd_bus{} intr_context member, and replace the checks against
it with cpu_intr_p() and cpu_softintr_p().
|
| 1.7 |
| 01-Jul-2011 |
dyoung | branches: 1.7.2; 1.7.6;
#include <sys/bus.h> instead of <machine/bus.h>.
|
| 1.6 |
| 04-Apr-2011 |
dyoung | Use callout(9) instead of the USB compatibility junk that went away
months ago.
|
| 1.5 |
| 16-Dec-2008 |
christos | branches: 1.5.6; 1.5.8;
replace bitmask_snprintf(9) with snprintb(3)
|
| 1.4 |
| 27-May-2008 |
dyoung | branches: 1.4.6;
Make this compile again: don't use USBDEVNAME().
While I'm here, use device_t, device_private(), aprint_error_dev().
|
| 1.3 |
| 28-Apr-2008 |
martin | branches: 1.3.2;
Remove clause 3 and 4 from TNF licenses
|
| 1.2 |
| 15-Dec-2007 |
perry | branches: 1.2.6; 1.2.8; 1.2.10;
__FUNCTION__ -> __func__
|
| 1.1 |
| 20-Mar-2007 |
dyoung | branches: 1.1.2; 1.1.8; 1.1.18; 1.1.20; 1.1.28; 1.1.32;
Add a port to the Infineon ADM5120.
Basics: the ADM5120 is a 175 MHz MIPS32 4Kc processor featuring a
6-port ethernet 10/100 switch with Auto MDI/X, a PCI controller,
USB 1.1 controller, UART, watchdog timer, eight GPIO pins, and a
multiport memory controller with both NOR and NAND flash support.
This code supports most of the devices on the ADM5120, including
the 6-port switch (each port attaches as an ethernet, admsw0 through
admsw5), the PCI controller, USB controller, GPIO, watchdog, and
UART.
Remaining work: the port includes no NOR/NAND flash drivers. No
bootloader is included. I have only tested the PCI bus driver with
the use of one PCI slot on the RouterBOARD 153. It is not possible
to exploit the capabilities of the ethernet switch using bridge(4).
I have only netbooted the ADM5120 on the RB153. Booting other
boards, and booting from flash memory, remains to be done.
Hardware availability: many low-cost routers, including the
RouterBOARD 100 series at RouterBOARD.com, use the Infineon ADM5120
processor.
Credits: Ruslan Ermilov and Vsevolod Lobko ported to the ADM5120,
and they wrote device drivers for the UART, USB controller, and
10/100 switch. Matt Isaacs brought the port up-to-date with
NetBSD-current, made it compile, and ran it first on the RB153.
I added drivers for the PCI controller, GPIO, and watchdog timer.
I produced the bus attachment for the CompactFlash slot with advice
from Mikrotik technical support and from Matt Thomas.
|
| 1.1.32.1 |
| 02-Jan-2008 |
bouyer | Sync with HEAD
|
| 1.1.28.1 |
| 26-Dec-2007 |
ad | Sync with head.
|
| 1.1.20.3 |
| 21-Jan-2008 |
yamt | sync with head
|
| 1.1.20.2 |
| 03-Sep-2007 |
yamt | sync with head.
|
| 1.1.20.1 |
| 20-Mar-2007 |
yamt | file ahci.c was added on branch yamt-lazymbuf on 2007-09-03 14:27:47 +0000
|
| 1.1.18.1 |
| 09-Jan-2008 |
matt | sync with HEAD
|
| 1.1.8.2 |
| 09-Jun-2007 |
ad | Sync with head.
|
| 1.1.8.1 |
| 20-Mar-2007 |
ad | file ahci.c was added on branch vmlocking on 2007-06-09 21:36:54 +0000
|
| 1.1.2.2 |
| 24-Mar-2007 |
yamt | sync with head.
|
| 1.1.2.1 |
| 20-Mar-2007 |
yamt | file ahci.c was added on branch yamt-idlelwp on 2007-03-24 14:54:51 +0000
|
| 1.2.10.2 |
| 04-May-2009 |
yamt | sync with head.
|
| 1.2.10.1 |
| 16-May-2008 |
yamt | sync with head.
|
| 1.2.8.2 |
| 04-Jun-2008 |
yamt | sync with head
|
| 1.2.8.1 |
| 18-May-2008 |
yamt | sync with head.
|
| 1.2.6.2 |
| 17-Jan-2009 |
mjf | Sync with HEAD.
|
| 1.2.6.1 |
| 02-Jun-2008 |
mjf | Sync with HEAD.
|
| 1.3.2.1 |
| 23-Jun-2008 |
wrstuden | Sync w/ -current. 34 merge conflicts to follow.
|
| 1.4.6.1 |
| 19-Jan-2009 |
skrll | Sync with HEAD.
|
| 1.5.8.1 |
| 06-Jun-2011 |
jruoho | Sync with HEAD.
|
| 1.5.6.1 |
| 21-Apr-2011 |
rmind | sync with head
|
| 1.7.6.1 |
| 25-Feb-2012 |
mrg | catch up with bus->intr_context going away.
|
| 1.7.2.3 |
| 22-May-2014 |
yamt | sync with head.
for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.
this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")
|
| 1.7.2.2 |
| 30-Oct-2012 |
yamt | sync with head
|
| 1.7.2.1 |
| 17-Apr-2012 |
yamt | sync with head
|
| 1.8.2.3 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.8.2.2 |
| 20-Aug-2014 |
tls | Rebase to HEAD as of a few days ago.
|
| 1.8.2.1 |
| 20-Nov-2012 |
tls | Resync to 2012-11-19 00:00:00 UTC
|
| 1.9.2.1 |
| 18-May-2014 |
rmind | sync with head
|
| 1.12.10.2 |
| 23-Jan-2017 |
skrll | Adapt to branch
|
| 1.12.10.1 |
| 06-Sep-2016 |
skrll | First pass at netbsd-7 updated with USB code from HEAD
|
| 1.12.6.17 |
| 28-Aug-2017 |
skrll | Sync with HEAD
|
| 1.12.6.16 |
| 12-Dec-2015 |
skrll | Whitespace
|
| 1.12.6.15 |
| 22-Oct-2015 |
skrll | Simplify *_XFER2SC using ux_bus
|
| 1.12.6.14 |
| 20-Oct-2015 |
skrll | Consistently providei/use *_{XFER,PIPE,BUS}2SC, etc macros
|
| 1.12.6.13 |
| 11-Oct-2015 |
skrll | Update ubm_allocx with the isoc frame count parameter and use it in
dwctwo(4)
|
| 1.12.6.12 |
| 19-Mar-2015 |
skrll | Do the same as OpenBSD and get rid of the *_handle typedefs and use
plain structures insteads
|
| 1.12.6.11 |
| 05-Dec-2014 |
skrll | KNF. Remove ( ) from return statements.
|
| 1.12.6.10 |
| 04-Dec-2014 |
skrll | Rework roothub control transfers so that much of the code is shared
across HCDs.
I have retained the vendor/product reporting for each HCD for now,
but it maybe get removed later.
ahci(4) now reports a language table and uses the usb_makestrdesc
function instead of rolling its own version.
|
| 1.12.6.9 |
| 03-Dec-2014 |
skrll | Provide a USETWD macro for use with USB words designated
initialisers.
|
| 1.12.6.8 |
| 03-Dec-2014 |
skrll | Replace malloc(9) with kmem(9)
|
| 1.12.6.7 |
| 03-Dec-2014 |
skrll | Use designated initializers for more descriptors.
|
| 1.12.6.6 |
| 03-Dec-2014 |
skrll | Use designated initialisers for usb_device_descriptor_t structs.
|
| 1.12.6.5 |
| 03-Dec-2014 |
skrll | The grand renaming of structure members.
No functional change.
|
| 1.12.6.4 |
| 02-Dec-2014 |
skrll | Step #1 of memory allocation re-organisation.
Centralised the buffer allocation routine which now supports DMA
and non-DMA capable host controllers. Remove the
ubm_{alloc,free}m methods from usbd_bus_methods.
The buffer allocation is only allowed in thread context and,
therefore, negates the usefulness of the reserve dma code which
is removed in this change.
USBD_NO_COPY is also no longer required as usbd_transfer and
usbd_transfer_complete now track buffer usage and handle any
copying.
|
| 1.12.6.3 |
| 01-Dec-2014 |
skrll | Add prefixes to method structures member names. No functional change.
|
| 1.12.6.2 |
| 30-Nov-2014 |
skrll | Whitespace
|
| 1.12.6.1 |
| 30-Nov-2014 |
skrll | Use C99 types. u_int{8,16,32,64}_t to uint{8,16,32,64}_t.
No functional change.
|
| 1.12.4.1 |
| 05-Apr-2017 |
snj | Pull up following revision(s) (requested by skrll in ticket #1395):
share/man/man4/axe.4: netbsd-7-nhusb
share/man/man4/axen.4: netbsd-7-nhusb
share/man/man4/cdce.4: netbsd-7-nhusb
share/man/man4/uaudio.4: netbsd-7-nhusb
share/man/man4/ucom.4: netbsd-7-nhusb
share/man/man4/uep.4: netbsd-7-nhusb
share/man/man4/urtw.4: netbsd-7-nhusb
share/man/man4/usb.4: netbsd-7-nhusb
share/man/man4/uyap.4: netbsd-7-nhusb
share/man/man4/xhci.4: netbsd-7-nhusb
share/man/man9/usbdi.9: netbsd-7-nhusb
sys/arch/amd64/conf/ALL: netbsd-7-nhusb
sys/arch/amd64/conf/GENERIC: netbsd-7-nhusb
sys/arch/amiga/dev/slhci_zbus.c: netbsd-7-nhusb
sys/arch/arm/allwinner/awin_otg.c: netbsd-7-nhusb
sys/arch/arm/allwinner/awin_usb.c: netbsd-7-nhusb
sys/arch/arm/amlogic/amlogic_dwctwo.c: netbsd-7-nhusb
sys/arch/arm/at91/at91ohci.c: netbsd-7-nhusb
sys/arch/arm/broadcom/bcm2835_dwctwo.c: netbsd-7-nhusb
sys/arch/arm/broadcom/bcm53xx_usb.c: netbsd-7-nhusb
sys/arch/arm/ep93xx/epohci.c: netbsd-7-nhusb
sys/arch/arm/gemini/obio_ehci.c: netbsd-7-nhusb
sys/arch/arm/imx/files.imx23: netbsd-7-nhusb
sys/arch/arm/imx/imxusb.c: netbsd-7-nhusb
sys/arch/arm/imx/imxusbreg.h: netbsd-7-nhusb
sys/arch/arm/omap/obio_ohci.c: netbsd-7-nhusb
sys/arch/arm/omap/omap3_ehci.c: netbsd-7-nhusb
sys/arch/arm/omap/omapl1x_ohci.c: netbsd-7-nhusb
sys/arch/arm/omap/tiotg.c: netbsd-7-nhusb
sys/arch/arm/s3c2xx0/ohci_s3c24x0.c: netbsd-7-nhusb
sys/arch/arm/samsung/exynos_usb.c: netbsd-7-nhusb
sys/arch/arm/xscale/pxa2x0_ohci.c: netbsd-7-nhusb
sys/arch/arm/zynq/zynq_usb.c: netbsd-7-nhusb
sys/arch/hpcarm/dev/nbp_slhci.c: netbsd-7-nhusb
sys/arch/hpcmips/dev/plumohci.c: netbsd-7-nhusb
sys/arch/i386/conf/ALL: netbsd-7-nhusb
sys/arch/i386/conf/GENERIC: netbsd-7-nhusb
sys/arch/i386/pci/gcscehci.c: netbsd-7-nhusb
sys/arch/luna68k/conf/GENERIC: netbsd-7-nhusb
sys/arch/mips/adm5120/dev/ahci.c: netbsd-7-nhusb
sys/arch/mips/adm5120/dev/ahcivar.h: netbsd-7-nhusb
sys/arch/mips/alchemy/dev/ohci_aubus.c: netbsd-7-nhusb
sys/arch/mips/atheros/dev/ehci_arbus.c: netbsd-7-nhusb
sys/arch/mips/atheros/dev/ohci_arbus.c: netbsd-7-nhusb
sys/arch/mips/conf/files.adm5120: netbsd-7-nhusb
sys/arch/mips/ralink/ralink_ehci.c: netbsd-7-nhusb
sys/arch/mips/ralink/ralink_ohci.c: netbsd-7-nhusb
sys/arch/mips/rmi/rmixl_ehci.c: netbsd-7-nhusb
sys/arch/mips/rmi/rmixl_ohci.c: netbsd-7-nhusb
sys/arch/playstation2/dev/ohci_sbus.c: netbsd-7-nhusb
sys/arch/powerpc/booke/dev/pq3ehci.c: netbsd-7-nhusb
sys/arch/powerpc/ibm4xx/dev/dwctwo_plb.c: netbsd-7-nhusb
sys/arch/x68k/dev/slhci_intio.c: netbsd-7-nhusb
sys/conf/files: netbsd-7-nhusb
sys/dev/cardbus/ehci_cardbus.c: netbsd-7-nhusb
sys/dev/cardbus/ohci_cardbus.c: netbsd-7-nhusb
sys/dev/cardbus/uhci_cardbus.c: netbsd-7-nhusb
sys/dev/ic/sl811hs.c: netbsd-7-nhusb
sys/dev/ic/sl811hsvar.h: netbsd-7-nhusb
sys/dev/isa/slhci_isa.c: netbsd-7-nhusb
sys/dev/marvell/ehci_mv.c: netbsd-7-nhusb
sys/dev/pci/ehci_pci.c: netbsd-7-nhusb
sys/dev/pci/ohci_pci.c: netbsd-7-nhusb
sys/dev/pci/uhci_pci.c: netbsd-7-nhusb
sys/dev/pci/xhci_pci.c: netbsd-7-nhusb
sys/dev/pcmcia/slhci_pcmcia.c: netbsd-7-nhusb
sys/dev/usb/Makefile.usbdevs: netbsd-7-nhusb
sys/dev/usb/TODO: netbsd-7-nhusb
sys/dev/usb/TODO.usbmp: netbsd-7-nhusb
sys/dev/usb/aubtfwl.c: netbsd-7-nhusb
sys/dev/usb/auvitek.c: netbsd-7-nhusb
sys/dev/usb/auvitek_audio.c: netbsd-7-nhusb
sys/dev/usb/auvitek_dtv.c: netbsd-7-nhusb
sys/dev/usb/auvitek_i2c.c: netbsd-7-nhusb
sys/dev/usb/auvitek_video.c: netbsd-7-nhusb
sys/dev/usb/auvitekvar.h: netbsd-7-nhusb
sys/dev/usb/ehci.c: netbsd-7-nhusb
sys/dev/usb/ehcireg.h: netbsd-7-nhusb
sys/dev/usb/ehcivar.h: netbsd-7-nhusb
sys/dev/usb/emdtv.c: netbsd-7-nhusb
sys/dev/usb/emdtv_dtv.c: netbsd-7-nhusb
sys/dev/usb/emdtv_ir.c: netbsd-7-nhusb
sys/dev/usb/emdtvvar.h: netbsd-7-nhusb
sys/dev/usb/ezload.c: netbsd-7-nhusb
sys/dev/usb/ezload.h: netbsd-7-nhusb
sys/dev/usb/files.usb: netbsd-7-nhusb
sys/dev/usb/hid.c: netbsd-7-nhusb
sys/dev/usb/hid.h: netbsd-7-nhusb
sys/dev/usb/if_athn_usb.c: netbsd-7-nhusb
sys/dev/usb/if_athn_usb.h: netbsd-7-nhusb
sys/dev/usb/if_atu.c: netbsd-7-nhusb
sys/dev/usb/if_atureg.h: netbsd-7-nhusb
sys/dev/usb/if_aue.c: netbsd-7-nhusb
sys/dev/usb/if_auereg.h: netbsd-7-nhusb
sys/dev/usb/if_axe.c: netbsd-7-nhusb
sys/dev/usb/if_axen.c: netbsd-7-nhusb
sys/dev/usb/if_axenreg.h: netbsd-7-nhusb
sys/dev/usb/if_axereg.h: netbsd-7-nhusb
sys/dev/usb/if_cdce.c: netbsd-7-nhusb
sys/dev/usb/if_cdcereg.h: netbsd-7-nhusb
sys/dev/usb/if_cue.c: netbsd-7-nhusb
sys/dev/usb/if_cuereg.h: netbsd-7-nhusb
sys/dev/usb/if_kue.c: netbsd-7-nhusb
sys/dev/usb/if_kuereg.h: netbsd-7-nhusb
sys/dev/usb/if_otus.c: netbsd-7-nhusb
sys/dev/usb/if_otusvar.h: netbsd-7-nhusb
sys/dev/usb/if_rum.c: netbsd-7-nhusb
sys/dev/usb/if_rumreg.h: netbsd-7-nhusb
sys/dev/usb/if_rumvar.h: netbsd-7-nhusb
sys/dev/usb/if_run.c: netbsd-7-nhusb
sys/dev/usb/if_runvar.h: netbsd-7-nhusb
sys/dev/usb/if_smsc.c: netbsd-7-nhusb
sys/dev/usb/if_smscreg.h: netbsd-7-nhusb
sys/dev/usb/if_smscvar.h: netbsd-7-nhusb
sys/dev/usb/if_udav.c: netbsd-7-nhusb
sys/dev/usb/if_udavreg.h: netbsd-7-nhusb
sys/dev/usb/if_upgt.c: netbsd-7-nhusb
sys/dev/usb/if_upgtvar.h: netbsd-7-nhusb
sys/dev/usb/if_upl.c: netbsd-7-nhusb
sys/dev/usb/if_ural.c: netbsd-7-nhusb
sys/dev/usb/if_uralreg.h: netbsd-7-nhusb
sys/dev/usb/if_uralvar.h: netbsd-7-nhusb
sys/dev/usb/if_url.c: netbsd-7-nhusb
sys/dev/usb/if_urlreg.h: netbsd-7-nhusb
sys/dev/usb/if_urndis.c: netbsd-7-nhusb
sys/dev/usb/if_urndisreg.h: netbsd-7-nhusb
sys/dev/usb/if_urtw.c: netbsd-7-nhusb
sys/dev/usb/if_urtwn.c: netbsd-7-nhusb
sys/dev/usb/if_urtwn_data.h: netbsd-7-nhusb
sys/dev/usb/if_urtwnreg.h: netbsd-7-nhusb
sys/dev/usb/if_urtwnvar.h: netbsd-7-nhusb
sys/dev/usb/if_urtwreg.h: netbsd-7-nhusb
sys/dev/usb/if_zyd.c: netbsd-7-nhusb
sys/dev/usb/if_zydreg.h: netbsd-7-nhusb
sys/dev/usb/irmce.c: netbsd-7-nhusb
sys/dev/usb/moscom.c: netbsd-7-nhusb
sys/dev/usb/motg.c: netbsd-7-nhusb
sys/dev/usb/motgvar.h: netbsd-7-nhusb
sys/dev/usb/ohci.c: netbsd-7-nhusb
sys/dev/usb/ohcireg.h: netbsd-7-nhusb
sys/dev/usb/ohcivar.h: netbsd-7-nhusb
sys/dev/usb/pseye.c: netbsd-7-nhusb
sys/dev/usb/slurm.c: netbsd-7-nhusb
sys/dev/usb/stuirda.c: netbsd-7-nhusb
sys/dev/usb/u3g.c: netbsd-7-nhusb
sys/dev/usb/uark.c: netbsd-7-nhusb
sys/dev/usb/uatp.c: netbsd-7-nhusb
sys/dev/usb/uaudio.c: netbsd-7-nhusb
sys/dev/usb/uberry.c: netbsd-7-nhusb
sys/dev/usb/ubsa.c: netbsd-7-nhusb
sys/dev/usb/ubsa_common.c: netbsd-7-nhusb
sys/dev/usb/ubsavar.h: netbsd-7-nhusb
sys/dev/usb/ubt.c: netbsd-7-nhusb
sys/dev/usb/uchcom.c: netbsd-7-nhusb
sys/dev/usb/ucom.c: netbsd-7-nhusb
sys/dev/usb/ucomvar.h: netbsd-7-nhusb
sys/dev/usb/ucycom.c: netbsd-7-nhusb
sys/dev/usb/udl.c: netbsd-7-nhusb
sys/dev/usb/udl.h: netbsd-7-nhusb
sys/dev/usb/udsbr.c: netbsd-7-nhusb
sys/dev/usb/udsir.c: netbsd-7-nhusb
sys/dev/usb/uep.c: netbsd-7-nhusb
sys/dev/usb/uftdi.c: netbsd-7-nhusb
sys/dev/usb/uftdireg.h: netbsd-7-nhusb
sys/dev/usb/ugen.c: netbsd-7-nhusb
sys/dev/usb/ugensa.c: netbsd-7-nhusb
sys/dev/usb/uhci.c: netbsd-7-nhusb
sys/dev/usb/uhcireg.h: netbsd-7-nhusb
sys/dev/usb/uhcivar.h: netbsd-7-nhusb
sys/dev/usb/uhid.c: netbsd-7-nhusb
sys/dev/usb/uhidev.c: netbsd-7-nhusb
sys/dev/usb/uhidev.h: netbsd-7-nhusb
sys/dev/usb/uhmodem.c: netbsd-7-nhusb
sys/dev/usb/uhso.c: netbsd-7-nhusb
sys/dev/usb/uhub.c: netbsd-7-nhusb
sys/dev/usb/uipad.c: netbsd-7-nhusb
sys/dev/usb/uipaq.c: netbsd-7-nhusb
sys/dev/usb/uirda.c: netbsd-7-nhusb
sys/dev/usb/uirdavar.h: netbsd-7-nhusb
sys/dev/usb/ukbd.c: netbsd-7-nhusb
sys/dev/usb/ukbdmap.c: netbsd-7-nhusb
sys/dev/usb/ukyopon.c: netbsd-7-nhusb
sys/dev/usb/ukyopon.h: netbsd-7-nhusb
sys/dev/usb/ulpt.c: netbsd-7-nhusb
sys/dev/usb/umass.c: netbsd-7-nhusb
sys/dev/usb/umass_isdata.c: netbsd-7-nhusb
sys/dev/usb/umass_isdata.h: netbsd-7-nhusb
sys/dev/usb/umass_quirks.c: netbsd-7-nhusb
sys/dev/usb/umass_quirks.h: netbsd-7-nhusb
sys/dev/usb/umass_scsipi.c: netbsd-7-nhusb
sys/dev/usb/umass_scsipi.h: netbsd-7-nhusb
sys/dev/usb/umassvar.h: netbsd-7-nhusb
sys/dev/usb/umcs.c: netbsd-7-nhusb
sys/dev/usb/umct.c: netbsd-7-nhusb
sys/dev/usb/umidi.c: netbsd-7-nhusb
sys/dev/usb/umidi_quirks.c: netbsd-7-nhusb
sys/dev/usb/umidi_quirks.h: netbsd-7-nhusb
sys/dev/usb/umodem.c: netbsd-7-nhusb
sys/dev/usb/umodem_common.c: netbsd-7-nhusb
sys/dev/usb/umodemvar.h: netbsd-7-nhusb
sys/dev/usb/ums.c: netbsd-7-nhusb
sys/dev/usb/uplcom.c: netbsd-7-nhusb
sys/dev/usb/urio.c: netbsd-7-nhusb
sys/dev/usb/urio.h: netbsd-7-nhusb
sys/dev/usb/usb.c: netbsd-7-nhusb
sys/dev/usb/usb.h: netbsd-7-nhusb
sys/dev/usb/usb_mem.c: netbsd-7-nhusb
sys/dev/usb/usb_mem.h: netbsd-7-nhusb
sys/dev/usb/usb_quirks.c: netbsd-7-nhusb
sys/dev/usb/usb_quirks.h: netbsd-7-nhusb
sys/dev/usb/usb_subr.c: netbsd-7-nhusb
sys/dev/usb/usbdevices.config: netbsd-7-nhusb
sys/dev/usb/usbdevs: netbsd-7-nhusb
sys/dev/usb/usbdevs.h: netbsd-7-nhusb
sys/dev/usb/usbdevs_data.h: netbsd-7-nhusb
sys/dev/usb/usbdi.c: netbsd-7-nhusb
sys/dev/usb/usbdi.h: netbsd-7-nhusb
sys/dev/usb/usbdi_util.c: netbsd-7-nhusb
sys/dev/usb/usbdi_util.h: netbsd-7-nhusb
sys/dev/usb/usbdivar.h: netbsd-7-nhusb
sys/dev/usb/usbhid.h: netbsd-7-nhusb
sys/dev/usb/usbhist.h: netbsd-7-nhusb
sys/dev/usb/usbroothub.c: netbsd-7-nhusb
sys/dev/usb/usbroothub.h: netbsd-7-nhusb
sys/dev/usb/usbroothub_subr.c: delete
sys/dev/usb/usbroothub_subr.h: delete
sys/dev/usb/uscanner.c: netbsd-7-nhusb
sys/dev/usb/uslsa.c: netbsd-7-nhusb
sys/dev/usb/usscanner.c: netbsd-7-nhusb
sys/dev/usb/ustir.c: netbsd-7-nhusb
sys/dev/usb/uthum.c: netbsd-7-nhusb
sys/dev/usb/utoppy.c: netbsd-7-nhusb
sys/dev/usb/uts.c: netbsd-7-nhusb
sys/dev/usb/uvideo.c: netbsd-7-nhusb
sys/dev/usb/uvisor.c: netbsd-7-nhusb
sys/dev/usb/uvscom.c: netbsd-7-nhusb
sys/dev/usb/uyap.c: netbsd-7-nhusb
sys/dev/usb/uyap_firmware.h: netbsd-7-nhusb
sys/dev/usb/uyurex.c: netbsd-7-nhusb
sys/dev/usb/x1input_rdesc.h: netbsd-7-nhusb
sys/dev/usb/xhci.c: netbsd-7-nhusb
sys/dev/usb/xhcireg.h: netbsd-7-nhusb
sys/dev/usb/xhcivar.h: netbsd-7-nhusb
sys/dev/usb/xinput_rdesc.h: netbsd-7-nhusb
sys/external/bsd/common/conf/files.linux: netbsd-7-nhusb
sys/external/bsd/common/include/linux/err.h: netbsd-7-nhusb
sys/external/bsd/common/include/linux/kernel.h: netbsd-7-nhusb
sys/external/bsd/common/include/linux/workqueue.h: netbsd-7-nhusb
sys/external/bsd/common/linux/linux_work.c: netbsd-7-nhusb
sys/external/bsd/drm2/dist/drm/radeon/atombios_encoders.c: netbsd-7-nhusb
sys/external/bsd/drm2/dist/drm/radeon/radeon_legacy_encoders.c: netbsd-7-nhusb
sys/external/bsd/drm2/drm/files.drmkms: netbsd-7-nhusb
sys/external/bsd/drm2/i915drm/files.i915drmkms: netbsd-7-nhusb
sys/external/bsd/drm2/include/linux/err.h: delete
sys/external/bsd/drm2/include/linux/workqueue.h: delete
sys/external/bsd/drm2/linux/files.drmkms_linux: netbsd-7-nhusb
sys/external/bsd/drm2/linux/linux_work.c: delete
sys/external/bsd/dwc2/dwc2.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dwc2.h: netbsd-7-nhusb
sys/external/bsd/dwc2/dwc2var.h: netbsd-7-nhusb
sys/external/bsd/dwc2/dwctwo2netbsd: netbsd-7-nhusb
sys/external/bsd/dwc2/conf/files.dwc2: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_core.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_core.h: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_coreintr.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_hcd.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_hcd.h: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_hcdddma.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_hcdintr.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_hcdqueue.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_hw.h: netbsd-7-nhusb
sys/modules/drmkms_linux/Makefile: netbsd-7-nhusb
sys/modules/i915drmkms/Makefile: netbsd-7-nhusb
sys/rump/dev/lib/libugenhc/ugenhc.c: netbsd-7-nhusb
sys/rump/dev/lib/libusb/Makefile: netbsd-7-nhusb
sys/rump/dev/lib/libusb/USB.ioconf: netbsd-7-nhusb
sys/rump/dev/lib/libusb/usb_at_ugenhc.c: delete
sys/rump/dev/lib/libusb/opt/opt_usb.h: delete
sys/rump/dev/lib/libusb/opt/opt_usbverbose.h: delete
sys/sys/mbuf.h: netbsd-7-nhusb
usr.sbin/usbdevs/usbdevs.8: netbsd-7-nhusb
usr.sbin/usbdevs/usbdevs.c: netbsd-7-nhusb
Merge netbsd-7-nhusb:
- API / infrastructure changes to support memory management changes.
- Memory management improvements and bug fixes.
- HCDs should now be MP safe
- conversion to KERNHIST based debug
- FS/LS isoc support on ehci(4).
- conversion to kmem(9)
- Some USB 3 support - mostly from Takahiro HAYASHI (t-hash).
- interrupt transfers now get proper DMA operations
- general bug fixes
- kern/48308
- uhub status notification improvements
- umass(4) probe fix (applied to HEAD already)
- ohci(4) short transfer fix
- Change the SOFTINT level from NET to SERIAL for the USB softint handler.
This gives the callback a chance of running when another softint handler
at SOFTINT_NET has blocked holding a lock, e.g. softnet_lock and most of
the network stack.
- kern/49065 - ifconfig tun0 ... sequence locks up system / lockup:
softnet_lock held across usb xfr
- kern/50491 - unkillable wait in usbd_transfer while using usmsc0
on raspberry pi 2
- kern/51395 - USB Ethernet makes xhci hang
- Various improvements to slhci(4)
- Various improvements to dwc2(4)
|
| 1.14.8.2 |
| 06-Sep-2018 |
pgoyette | Sync with HEAD
Resolve a couple of conflicts (result of the uimin/uimax changes)
|
| 1.14.8.1 |
| 16-Apr-2018 |
pgoyette | Sync with HEAD, resolve some conflicts
|
| 1.14.2.1 |
| 25-Feb-2020 |
martin | Pull up following revision(s) (requested by skrll in ticket #1507):
sys/dev/usb/ohci.c: revision 1.296
sys/dev/usb/uhci.c: revision 1.294
sys/external/bsd/dwc2/dwc2.c: revision 1.72
sys/arch/mips/adm5120/dev/ahci.c: revision 1.21
sys/dev/usb/ehci.c: revision 1.274
Fix a memory leak. Spotted by nat@
|
| 1.15.2.2 |
| 08-Apr-2020 |
martin | Merge changes from current as of 20200406
|
| 1.15.2.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.17.6.1 |
| 29-Feb-2020 |
ad | Sync with head.
|
| 1.17.4.2 |
| 01-Mar-2020 |
martin | Pull up following revision(s) (requested by riastradh in ticket #744):
sys/dev/usb/uhci.c: revision 1.292
sys/dev/usb/uhci.c: revision 1.293
sys/dev/usb/usbdi.h: revision 1.99
sys/dev/usb/motg.c: revision 1.26
sys/dev/usb/motg.c: revision 1.27
sys/dev/usb/motg.c: revision 1.28
sys/dev/usb/motg.c: revision 1.29
sys/external/bsd/dwc2/dwc2.c: revision 1.70
sys/external/bsd/dwc2/dwc2.c: revision 1.71
sys/dev/usb/usb.c: revision 1.181
sys/arch/mips/adm5120/dev/ahci.c: revision 1.20
sys/dev/usb/usb.c: revision 1.182
sys/dev/usb/xhci.c: revision 1.116
sys/dev/usb/xhci.c: revision 1.117
sys/dev/usb/xhci.c: revision 1.118
sys/dev/usb/uhci.c: revision 1.289
sys/dev/usb/usbdivar.h: revision 1.121
sys/dev/usb/usbdi.c: revision 1.190
sys/dev/usb/usbdivar.h: revision 1.122
sys/dev/usb/usbdi.c: revision 1.191
sys/dev/usb/usbdi.c: revision 1.192
sys/external/bsd/dwc2/dwc2var.h: revision 1.7
sys/dev/usb/motg.c: revision 1.30
sys/dev/usb/motg.c: revision 1.31
sys/dev/usb/motg.c: revision 1.32
sys/dev/usb/motg.c: revision 1.33
sys/external/bsd/dwc2/dwc2.c: revision 1.67
sys/external/bsd/dwc2/dwc2.c: revision 1.68
sys/dev/usb/ehci.c: revision 1.270
sys/external/bsd/dwc2/dwc2.c: revision 1.69
sys/dev/usb/usbdi.h: revision 1.100
sys/dev/usb/ehci.c: revision 1.271
sys/arch/mips/adm5120/dev/ahci.c: revision 1.18
sys/dev/usb/usbdi.h: revision 1.101
sys/dev/usb/ehci.c: revision 1.272
sys/dev/ic/sl811hs.c: revision 1.103
sys/arch/mips/adm5120/dev/ahci.c: revision 1.19
sys/dev/usb/ehci.c: revision 1.273
sys/dev/usb/ohci.c: revision 1.293
sys/dev/usb/uhci.c: revision 1.290
sys/dev/usb/ohci.c: revision 1.294
sys/dev/usb/uhci.c: revision 1.291
sys/dev/usb/ohci.c: revision 1.295
Teach usb_rem_task to return whether removed from queue or not.
New function usb_task_pending for diagnostic assertions.
Usable only for negative diagnostic assertions:
KASSERT(!usb_task_pending(dev, task))
If you can think of a better name for this than !usb_task_pending,
I'm all ears.
-
Nothing guarantees xfer's timeout has completed.
Wait for it when we free the xfer.
-
New xfer state variables ux_timeout_set and ux_timeout_reset.
These are needed because:
- The host controller interrupt cannot wait for the callout or task
to finish running.
- Nothing in the USBD API as is waits for the callout or task to
finish running.
- Callers expect to be able to resubmit USB xfers from xfer callbacks
without waiting for anything to finish running.
The variable ux_timeout_set can be used by a host controller to
decide on submission whether to schedule the callout or to ask an
already-scheduled callout or already-queued task to reschedule the
callout, by setting the variable ux_timeout_reset to true.
When the callout or task runs and sees that ux_timeout_reset is true,
rather than queue the task or abort the xfer, it can instead just
schedule the callout anew.
-
Fix steady state of timeouts in ehci.
This is complicated because:
1. There are three ways that an xfer can be completed:
(a) hardware interrupt completes xfer
(b) software decision aborts xfer with USBD_CANCELLED
(c) timeout aborts xfer with USBD_TIMEOUT
2. The timeout abort can't be done in callout because ehci_sync_hc,
called unconditionally by ehci_abort_xfer to wait until the device
has finished using any references to the xfer, may sleep. So we
have to schedule a callout that, when run, will schedule a usb_task.
3. The hardware completion interrupt can't sleep waiting for a callout
or task to finish -- can't use callout_halt or usb_rem_task_wait.
So the callout and usb_task must be able to run _after_ the hardware
completion interrupt, and recognize that they're late to the party.
(Note, though, that usbd_free_xfer does wait for the callout and
task to complete, so there's no danger they may use themselves after
free.)
4. The xfer may resubmitted -- and the timeout may be rescheduled --
immediately after the hardware completion interrupt, _while_ the
callout and/or usb_task may still be scheduled. Specifically, we
may have the following sequence of events:
(a) hardware completion interrupt
(b) callout or usb_task fires
(c) driver resubmits xfer
(d) callout or usb_task acquires lock and looks around dazed and
bewildered at the firehose of events like reading the news in 2019
The mechanism for sorting this out is that we have two bits of state:
- xfer->ux_timeout_set informs the driver, when submitting an xfer and
setting up its timeout, whether either the callout or usb_task is
already scheduled or not.
- xfer->ux_timeout_reset informs the callout or usb_task whether it
should reschedule the callout, because the xfer got resubmitted, or
not.
-
Factor out HCI-independent xfer completion logic.
New API for HCI drivers to synchronize hardware completion
interrupts, synchronous aborts, and asynchronous timeouts:
- When submitting an xfer to hardware, call
usbd_xfer_schedule_timeout(xfer).
- On HCI completion interrupt for xfer completion:
if (!usbd_xfer_trycomplete(xfer))
return; /* timed out or aborted, ignore it */
- In upm_abort methods, call usbd_xfer_abort(xfer).
For HCI drivers that use this API (not needed in drivers that don't,
or for xfers like root intr xfers that don't use it):
- New ubm_abortx method serves role of former *hci_abort_xfer, but
without any logic for wrangling timeouts/callouts/tasks -- caller
in usbd_xfer_abort has already handled them.
- New ubm_dying method, returns true if the device is in the process
of detaching, used by the timeout logic.
Converted and tested:
- ehci
- ohci
Converted and compile-tested:
- ahci (XXX did this ever work?)
- dwc2
- motg (XXX missing usbd_xfer_schedule_timeout in motg_*_start?)
- uhci
- xhci
Not changed:
- slhci (sys/dev/ic/sl811hs.c) -- doesn't use a separate per-xfer
callout for timeouts (XXX but maybe should?)
- ugenhc (sys/rump/dev/lib/libugenhc/ugenhc.c) -- doesn't manage its
own transfer timeouts
-
Fix steady state of root intr xfers.
Why?
- Avoid completing a root intr xfer multiple times in races.
- Avoid potential use-after-free in poll_hub callouts (uhci, ahci).
How?
- Use sc->sc_intr_xfer or equivalent to store only a pending xfer
that has not yet completed -- whether successfully, by timeout, or
by synchronous abort. When any of those happens, set it to null
under the lock, so the xfer is completed only once.
- For hci drivers that use a callout to poll the root hub (uhci, ahci):
. Pass the softc pointer, not the xfer, to the callout, so the
callout is not even tempted to use xfer after free -- if the
callout fires, but the xfer is synchronously aborted before the
callout can do anything, the xfer might be freed by the time the
callout starts to examine it.
. Teach the callout to do nothing if it is callout_pending after it
has fired. This way:
1. completion or synchronous abort can just callout_stop
2. start can just callout_schedule
If the callout had already fired before (1), and doesn't acquire
the bus lock until after (2), it may be tempted to abort the new
root intr xfer just after submission, which would be wrong -- so
instead we just have the callout do nothing if it notices it has
been rescheduled, since it will fire again after the appropriate
time has elapsed.
-
Initialize xfer->ux_status in uhci_root_intr_start.
Otherwise, it will be USBD_NOT_STARTED, so usbd_ar_pipe will skip
calling upm_abort.
Candidate fix for PR kern/54963, same problem as reported at:
href="https://mail-index.NetBSD.org/current-users/2020/02/13/msg037740.html
-
Set ux_isdone in uhci_poll_hub for DIAGNOSTIC.
-
Fix mistakes in previous sloppy change with root intr xfers.
- Make sure ux_status is set to USBD_IN_PROGRESS when started.
Otherwise, if it is still in flight when we abort the pipe,
usbd_ar_pipe will skip calling upm_abort.
- Initialize ux_status under the lock; in principle a completion
interrupt (or a delay) could race with the initialization.
- KASSERT that the xfer is in progress when we're about to complete
it.
Candidate fix for PR kern/54963 for other HCI drivers than uhci.
ok nick
ok phone
(This is the change that nick evidently MEANT to ok when he ok'd the
previous one!)
-
Fix build
-
Fix non-DIAGNOSTIC builds.
-
Fix wrong KASSERT in motg abort.
This has been wrong since last summer when we did the transition to
xfer->ux_status = USBD_CANCELLED earlier.
XXX pullup-9
-
Fix mistakes in timeout/abort/completion changes in motg(4).
- Call usbd_xfer_schedule_timeout so we actually do time out.
- Don't call usbd_xfer_trycomplete until all the data have been
transferred -- it commits to completion, not timeout.
- Use xfer->ux_status != USBD_IN_PROGRESS to test whether, after a
partial write, an xfer has been interrupted or timed out and need
not be continued.
- Remove wrong assertion.
-
Fix mistake in use of usbd_xfer_schedule_timeout in motg.
This code path is used both for xfers that are new, and xfers that
are being done piece by piece and are partway done. For the latter
case, skip usbd_xfer_schedule_timeout so we schedule it only once per
xfer.
-
Simplify some branches and kassert some redundant assignments.
|
| 1.17.4.1 |
| 25-Feb-2020 |
martin | Pull up following revision(s) (requested by skrll in ticket #718):
sys/dev/usb/ohci.c: revision 1.296
sys/dev/usb/uhci.c: revision 1.294
sys/external/bsd/dwc2/dwc2.c: revision 1.72
sys/arch/mips/adm5120/dev/ahci.c: revision 1.21
sys/dev/usb/ehci.c: revision 1.274
Fix a memory leak. Spotted by nat@
|
| 1.22.4.1 |
| 03-Apr-2021 |
thorpej | Sync with HEAD.
|
| 1.23.2.1 |
| 21-Mar-2021 |
thorpej | Give config_found() the same variadic arguments treatment as
config_search(). This commit only adds the CFARG_EOL sentinel
to the existing config_found() calls. Conversion of config_found_sm_loc()
and config_found_ia() call sites will be in subsequent commits.
|
| 1.24.8.1 |
| 04-Aug-2021 |
thorpej | Adapt to CFARGS().
|
