add a comment explaining how to regenerate mcadevs.h and mcadevs_data.h

branches: 1.23.8;
Remove clause 3 and 4 from TNF licenses

branches: 1.22.28; 1.22.30; 1.22.32;
Add the product defines for the cards I intend to write support for. It
seems like we should just add the product defines to all of them.

Add a bunch of adapters from my rs6000 to this file

branches: 1.20.26; 1.20.30; 1.20.32;
merge ktrace-lwp.

branches: 1.19.2;
add one more Tiara ID and Standard MicroSystems 3016/MC ID

branches: 1.18.2; 1.18.10;
allocate identifier for BusTek BT-640A adapter

add 0x90EE - IBM SVGA Adapter/A

allocate identifier for NCR 53C90

branches: 1.15.2;
Add driver for SKNET Personal and MC+ - AMD Lance 7990 based ethernet cards.
Both models tested and seem to be quite stable and fast.

Thanks to:
- Hans Hubner <hans@Huebner.org> for giving me the cards for testing
- Georg Klug of Syskonnect, who provided me with hw docs for these cards,
very promptly and willingly - I wish all vendors would be like this
- Alfred Arnold, Linux SKNET driver author, for giving me valuable Syskonnect
contact :)

Add constant for SKNET Ethernet Card

Add support for IBM Multi-Protocol Communications Adapter. Card provided
by Hans Hubner <hans@huebner.org>.
We only support the card in "serial" mode. BISYNC nor SDLC modes are
not supported.

Add support for NeoTecH Single RS-232 Async. Adapter, SM110. Tested
with card provided by Hans Hubner <hans@huebner.org>.

Also pretty the autoconf attach messages a little.

Add MCA ne(4) attachment for Novell NE/2 Ethernet adapter and clones.
Tested with NE/2 card provided to me by Hans Hubner <hans@Huebner.ORG>.

The Compex and Arco cards were not tested. According to Linux ne2 driver,
they should work same way as NE/2.

add two Novell NE/2 compatible products

Add couple cards I got from Hans Hubner <hans@Huebner.ORG>

Add a driver for IBM ESDI disk controllers. Tested with IBM Integ. ESDI Fixed
Disk & Controller only at the moment.

This driver still needs some touchup (error recovery is not quite
good, MCA DMA controller goo should be moved to driver independant
location), but is working enough to be usable for others. And I
want this under CVS control :)

Thanks to Scott Telford <st@epcc.ed.ac.uk> for providing me docs for
these devices (IBM DASD Storage Interface Specification for MCA rev. 2.2).

Add couple AT1720 entries

cosmetic change for autoconf printing: for memory extension cards,
just print ": configured" if they are enabled; they don't need any
special driver to work, printing "not configured" might be confusing

Change names of WD80x3x cards to what is in ADF's at
http://members.aol.com/mcapage1/adflist1.htm
Add couple IBM WD80x3x clones
Arrange so that appropriate defines are generated for WD80x3x cards

Add entry for ATI AT1720T, another card I've got from David Brownlee.

Add couple of Computone products; I looked up ADF for 0x61f3 (which
I am owner of) and found couple others as well.
Mark 3c529-type cards and IBM Internal modem for inclusion in mcadevs.h.

adjust the 3c523 entry to fit the actual product name

branches: 1.1.6; 1.1.8;
MI part of MicroChannel Architecture bus support

This work is based on code written by Scott D. Telford, the IBM
Token Ring card attachment was written by Gregory McGarry.

XXX this is still very experimental and development version; use at your
XXX own risk