| History log of /src/sys/dev/mii/etphy.c |
| Revision | | Date | Author | Comments |
| 1.9 |
| 15-Mar-2020 |
thorpej | Define and implement a locking protocol for the ifmedia / mii layers:
- MP-safe drivers provide a mutex to ifmedia that is used to serialize
access to media-related structures / hardware regsiters. Converted
drivers use the new ifmedia_init_with_lock() function for this. The
new name is provided to ease the transition.
- Un-converted drivers continue to call ifmedia_init(), which will supply
a compatibility lock to be used instead. Several media-related entry
points must be aware of this compatibility lock, and are able to acquire
it recursively a limited number of times, if needed. This is a SPIN
mutex with priority IPL_NET.
- This same lock is used to serialize access to PHY registers and other
MII-related data structures.
The PHY drivers are modified to acquire and release the lock, as needed,
and assert the lock is held as a diagnostic aid.
The "usbnet" framework has had an overhaul of its internal locking
protocols to fit in with the media / mii changes, and the drivers adapted.
USB wifi drivers have been changed to provide their own adaptive mutex
to the ifmedia later via a new ieee80211_media_init_with_lock() function.
This is required because the USB drivers need an adaptive mutex.
Besised "usbnet", a few other drivers are converted: vmx, wm, ixgbe / ixv.
mcx also now calls ifmedia_init_with_lock() because it needs to also use
an adaptive mutex. The mcx driver still needs to be fully converted to
NET_MPSAFE.
|
| 1.8 |
| 28-Feb-2020 |
msaitoh | Move PHY_RESET() in the media change path from if_et.c to etphy.c.
I don't know if the reset is required or not. I tested some media
transitions without the reset and it worked. It might be OK to remove
but Linux does it only in et1011c_config_aneg(). So move the reset to
etphy_service(,,MII_MEDIACHG)'s autonego case. This change is also
required for future locking changes.
|
| 1.7 |
| 27-Nov-2019 |
msaitoh | branches: 1.7.2;
- Simplify sc->mii_anegticks setting. Same as FreeBSD.
Don't set the default value not in the attach function. Instead, set the
default value (MII_ANEGTICKS) first in the beginning of the
mii_phy_add_media(). The function already has the code to change the value to
MII_ANEGTICKS_GIGE if it's gigabit capable.
- Remove extra pmf_device_register() call. It's done in mii_phy_add_media().
|
| 1.6 |
| 16-Aug-2019 |
msaitoh | From FreeBSD:
- Support ET1011.
- Use mii_phy_flowstatus() to reflect flow status from negotiated result.
|
| 1.5 |
| 16-Aug-2019 |
msaitoh | No functional change:
- Use static.
- KNF.
|
| 1.4 |
| 25-Mar-2019 |
msaitoh | branches: 1.4.4;
KNF. No functional change.
|
| 1.3 |
| 24-Feb-2019 |
christos | use a macro to tidy up the phydesc array initialization, from FreeBSD
|
| 1.2 |
| 22-Jan-2019 |
msaitoh | Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
|
| 1.1 |
| 13-Nov-2010 |
jnemeth | branches: 1.1.6; 1.1.54; 1.1.60; 1.1.62;
PR/39094 - Kaspar Brand -- Add et (Agere ET1310/ET1301) network driver
The et(4) driver supports PCI Express Ethernet adapters based on
the Agere/LSI ET1310/ET1301 integrated MAC/PHY.
The et(4) driver was written by Sepherosa Ziehau for DragonFlyBSD,
ported to OpenBSD by Jonathan Gray and subsequently ported to NetBSD
by Kaspar Brand.
|
| 1.1.62.2 |
| 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.1.62.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.1.60.1 |
| 26-Jan-2019 |
pgoyette | Sync with HEAD
|
| 1.1.54.1 |
| 14-Apr-2020 |
martin | Pull up the following revisions, requested by msaitoh in ticket #1529:
sys/dev/mii/miidevs 1.154, 1.162-1.167
sys/dev/mii/atphy.c 1.28 via patch
sys/dev/mii/brgphy.c 1.87 via patch
sys/dev/mii/etphy.c 1.5, 1.6 via patch
sys/dev/mii/rdcphy.c 1.6, 1.8 via patch
- Add support Broadcom BCM54213PE and some new RDC devices.
- Rename RDC to xxRDC.
- Use xxVIA instead of VIA.
- etphy(4):
- Rename ET1011 to ET1011C and add ET1011 support.
- Use mii_phy_flowstatus() to reflect flow status from negotiated
result.
- Use static.
- KNF.
|
| 1.1.6.2 |
| 05-Mar-2011 |
rmind | sync with head
|
| 1.1.6.1 |
| 13-Nov-2010 |
rmind | file etphy.c was added on branch rmind-uvmplock on 2011-03-05 20:53:31 +0000
|
| 1.4.4.1 |
| 01-Sep-2019 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #144):
sys/dev/mii/miidevs: revision 1.154
sys/dev/mii/etphy.c: revision 1.5
sys/dev/mii/etphy.c: revision 1.6
No functional change:
- Use static.
- KNF.
From FreeBSD:
- Rename ET1011 to ET1011C
- Add ET1011
From FreeBSD:
- Support ET1011.
- Use mii_phy_flowstatus() to reflect flow status from negotiated result.
|
| 1.7.2.1 |
| 29-Feb-2020 |
ad | Sync with head.
|
