| History log of /src/sys/dev/pci/ixgbe/ixgbe_82598.c |
| Revision | | Date | Author | Comments |
| 1.19 |
| 06-Jun-2022 |
msaitoh | s/filer/filter/ in comment. No functional change.
|
| 1.18 |
| 24-Dec-2021 |
msaitoh | Update copyright to 2020.
FreeBSD: 8455e365f77f5b66ac9521dbcd690f79345ce147
|
| 1.17 |
| 10-Dec-2021 |
msaitoh | Whitespace fix. Sync with FreeBSD ix-3.3.14.
|
| 1.16 |
| 30-Apr-2021 |
msaitoh | Add missing __KERNEL_RCSID().
|
| 1.15 |
| 25-Jun-2020 |
msaitoh | branches: 1.15.6;
Use unsigned to avoid undefined behavior in ixgbe_fc_enable_generic().
Same as ixgbe_common.c rev. 1.24. Found by KUBSan.
|
| 1.14 |
| 03-Jan-2020 |
pgoyette | Fix some typos in comments.
From vezhlys on freenode IRC.
|
| 1.13 |
| 23-Dec-2019 |
msaitoh | Add recovery code for unsupported SFP+.
Before this commit:
If an unsuppored SFP module is inserted before booting, the driver attach
failed and there was no way to recover form it without rebooting or
detaching/reattaching drvier (drvctl -d && drvctl -r pciN).
After this commit:
We can automatically recover any time by replacing it with a supported
module.
|
| 1.12 |
| 04-Apr-2018 |
msaitoh | branches: 1.12.2; 1.12.8;
Sync with FreeBSD r331224 except ixv_if_update_admin_status()'s change:
- Fix length of reading buffer when the command is Read Flash in
ixgbe_host_interface_command().
- Add missing start_hw() call in ixv_init_locked(). This is not a real bug
because start_hw just set hw->adapter_stopped to false and anyone refer it.
- Style change.
- Update comment.
|
| 1.11 |
| 04-Apr-2018 |
msaitoh | Sync with the remaining part of FreeBSD r328265 except sfp_reinit stuff:
- Always schedule module intterrupt in ixgbe_config_link() when a device is
SFP+ based.
- Use not loop index but txr->me in ixv_initialize_{transmit,receive}_units().
It's required for VMDQ but NetBSD doesn't use it, so it's not a bug in
NetBSD.
- Simplify ixgbe_bp_wd_set(). No functional change.
- Whitespace.
|
| 1.10 |
| 06-Dec-2017 |
msaitoh | branches: 1.10.2;
Sync with FreeBSD's r326022. All of the following changes have no influence
to netbsd:
- Check ETHERCAP_VLAN_HWTAGGING in ixgbe_setup_vlan_hw_support(). This change
has no influence to netbsd because it's enabled by default and NetBSD has
no API to disable it.
- Fix for netmap module.
- Remove never defined UDP_IPV4_EX
- Add SPDX-License-Identifier
|
| 1.9 |
| 30-Aug-2017 |
msaitoh | - Sync with FreeBSD r320688 (and up to r322865):
- Add C3000(Denvertion(-NS)) support.
- Add bypass function support for bypass adapters. Sysctls are provided.
Not tested because I have no any bypass adapter.
- ixv(4): set RSS mapping.
- Change EEE sysctl.
- ixv(4): Add TSOv6.
- ixv(4): Mailbox API 1.2 and more are implemented and comment says it
negotiate with 1.2 but it really does 1.1...
- Remove thermal test sysctl.
- Fix unknown bugs.
- Print driver feature capabilities and enable bits when verbose boot.
|
| 1.8 |
| 02-Dec-2016 |
msaitoh | branches: 1.8.8;
Update ixg(4) and ixv(4) up to FreeBSD r292674:
- Add X552 SFP+ and X550T single port.
- Bug fixes.
|
| 1.7 |
| 01-Dec-2016 |
msaitoh | Update ixg(4) and ixv(4) up to FreeBSD r282299:
- Add support for X55x.
- ADD EEE support (not tested).
- Add WOL support (not tested).
- Add suspend/resume support (not testd).
- Add LPLU support (not tested).
- Add DMA Coalescing (note verified).
- Not tested well for sysctls.
- Fix ixgbe_set_advertise() a bit. At least, FreeBSD r294578 is required
to work hw.ixg0.advertise_speed sysctl correctly.
|
| 1.6 |
| 01-Dec-2016 |
msaitoh | Update ixg(4) and ixv(4) up to FreeBSD r280197:
- Add support for 82599_QSFP_SF_QP and X540T1.
- Add partial support for X55x. It's required to sync with FreeBSD r282299
to support X55x.
- Bugfixes.
|
| 1.5 |
| 05-Aug-2015 |
msaitoh | branches: 1.5.2;
Sync ixg(4) up to FreeBSD r279805 (or r280181) which include some bugfixes.
TODO:
- Merge r280182 and newer. It's required to support X55x.
- MSI/MSI-X support.
|
| 1.4 |
| 24-Apr-2015 |
msaitoh | Sync ixg(4) up to FreeBSD r250108:
- Cleanup some unused counters and some unused code.
- Improve performance.
- Fix flow control - don't override user value on re-init
- Fix to make 1G optics work correctly
- Change to interrupt enabling - some bits were incorrect
for certain hardware.
- Certain stats fixes, remove a duplicate increment of
ierror, thanks to Scott Long for pointing these out.
- Fix the setting of RX which related to multicast.
- Some netmap related fixes.
|
| 1.3 |
| 02-Apr-2015 |
msaitoh | Update our ixg(4) driver up to FreeBSD r238149:
- Add TSO6 support.
- The max size in dma tag is changed from 65535 to 262140 (IXGBE_TSO_SIZE).
The value is the same as other *BSDs. The change might cause a address
space shortage (ixgbe_dmamap_create() might fail) on some machines.
- Fix a lot of bugs.
- Improve performance.
|
| 1.2 |
| 27-Mar-2015 |
msaitoh | Synchronize our ixg(4) driver up to FreeBSD r230775:
- Add X540 support.
- Add 100BaseTX support.
- Fix a lot of bugs.
- Improve performance.
|
| 1.1 |
| 12-Aug-2011 |
dyoung | branches: 1.1.12; 1.1.28; 1.1.30;
Add sources for ixgbe(4), a Intel 82599 10-gigabit ethernet driver
ported from FreeBSD.
|
| 1.1.30.4 |
| 05-Dec-2016 |
skrll | Sync with HEAD
|
| 1.1.30.3 |
| 22-Sep-2015 |
skrll | Sync with HEAD
|
| 1.1.30.2 |
| 06-Jun-2015 |
skrll | Sync with HEAD
|
| 1.1.30.1 |
| 06-Apr-2015 |
skrll | Sync with HEAD
|
| 1.1.28.3 |
| 14-Jun-2016 |
snj | Pull up following revision(s) (requested by msaitoh in ticket #1174):
sys/dev/pci/ixgbe/README: 1.2
sys/dev/pci/ixgbe/ixgbe.c: 1.30-1.33, 1.35 via patch
sys/dev/pci/ixgbe/ixgbe.h: 1.8 via patch
sys/dev/pci/ixgbe/ixgbe_82598.c: 1.5 via patch
sys/dev/pci/ixgbe/ixgbe_82599.c: 1.10 via patch
sys/dev/pci/ixgbe/ixgbe_api.c: 1.8-1.11 via patch
sys/dev/pci/ixgbe/ixgbe_api.h: 1.5-1.6 via patch
sys/dev/pci/ixgbe/ixgbe_common.c: 1.6-1.7 via patch
sys/dev/pci/ixgbe/ixgbe_common.h: 1.5 via patch
sys/dev/pci/ixgbe/ixgbe_osdep.h: 1.9 via patch
sys/dev/pci/ixgbe/ixgbe_phy.c: 1.6 via patch
sys/dev/pci/ixgbe/ixgbe_phy.h: 1.5 via patch
sys/dev/pci/ixgbe/ixgbe_type.h: 1.11, 1.13 via patch
sys/dev/pci/ixgbe/ixgbe_vf.c: 1.5-1.6 via patch
sys/dev/pci/ixgbe/ixv.c: 1.9-1.10, 1.12-1.14 via patch
sys/dev/pci/ixgbe/ixv.h: 1.6 via patch
sys/dev/pci/ixgbe/ixgbe_dcb.c: 1.1
sys/dev/pci/ixgbe/ixgbe_dcb.h: 1.1
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: 1.1
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h: 1.1
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: 1.1
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h: 1.1
Sync ixg(4) up to ixgbe.c rev. 1.35 except MSI/MSI-X and NET_MPSAFE:
- Sync ixg(4) up to FreeBSD r279805 (or r280181) which include some
bugfixes.
- Add missing evcnt_detach(&rxr->rx_copies) in ixgbe_detach().
- Fix error path in ixgbe_attach() and ixgbe_detatch() to prevent
panic.
- Remove unreachable code.
- Remove duplicated assignment of mh->m_len.
- Reduce the diff against FreeBSD (tabs, spaces and comments)
- ixv.c: Fix unintialized data. Include vlan.h and check NVLAN.
- Avoid shadowing global `min'.
|
| 1.1.28.2 |
| 06-May-2015 |
riz | Pull up following revisions (requested by msaitoh in ticket #734):
sys/dev/pci/ixgbe/LICENSE 1.2
sys/dev/pci/ixgbe/ixgbe.c 1.28-1.29
sys/dev/pci/ixgbe/ixgbe.h 1.7
sys/dev/pci/ixgbe/ixgbe_82598.c 1.4
sys/dev/pci/ixgbe/ixgbe_82598.h 1.3
sys/dev/pci/ixgbe/ixgbe_82599.c 1.9
sys/dev/pci/ixgbe/ixgbe_82599.h 1.2
sys/dev/pci/ixgbe/ixgbe_api.c 1.7
sys/dev/pci/ixgbe/ixgbe_api.h 1.4
sys/dev/pci/ixgbe/ixgbe_common.c 1.5
sys/dev/pci/ixgbe/ixgbe_common.h 1.4
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.4
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.3
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.7
sys/dev/pci/ixgbe/ixgbe_phy.c 1.5
sys/dev/pci/ixgbe/ixgbe_phy.h 1.4
sys/dev/pci/ixgbe/ixgbe_type.h 1.10
sys/dev/pci/ixgbe/ixgbe_vf.c 1.4
sys/dev/pci/ixgbe/ixgbe_vf.h 1.5
sys/dev/pci/ixgbe/ixgbe_x540.c 1.3
sys/dev/pci/ixgbe/ixgbe_x540.h 1.2
sys/dev/pci/ixgbe/ixv.c 1.8
- Sync ixg(4) up to FreeBSD r250108:
- Cleanup some unused counters and some unused code.
- Improve performance.
- Fix flow control - don't override user value on re-init
- Fix to make 1G optics work correctly
- Change to interrupt enabling - some bits were incorrect
for certain hardware.
- Certain stats fixes, remove a duplicate increment of
ierror, thanks to Scott Long for pointing these out.
- Fix the setting of RX which related to multicast.
- Some netmap related fixes.
- Fixes link error without vlan. PR#49879 reported by Hauke Fath.
[msaitoh, ticket #734]
|
| 1.1.28.1 |
| 19-Apr-2015 |
riz | Apply patch (requested by msaitoh in ticket #697):
sys/dev/pci/files.pci 1.375 via patch
sys/dev/pci/ixgbe/ixgbe.c 1.24-1.27 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.4-1.6 via patch
sys/dev/pci/ixgbe/ixgbe_82598.c 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_82598.h 1.1-1.2 via patch
sys/dev/pci/ixgbe/ixgbe_82599.c 1.6-1.8 via patch
sys/dev/pci/ixgbe/ixgbe_82599.h 1.1 via patch
sys/dev/pci/ixgbe/ixgbe_api.c 1.5-1.6 via patch
sys/dev/pci/ixgbe/ixgbe_api.h 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_common.c 1.3-1.4 via patch
sys/dev/pci/ixgbe/ixgbe_common.h 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.4-1.6 via patch
sys/dev/pci/ixgbe/ixgbe_phy.c 1.3-1.4 via patch
sys/dev/pci/ixgbe/ixgbe_phy.h 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_type.h 1.8-1.9 via patch
sys/dev/pci/ixgbe/ixgbe_vf.c 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_vf.h 1.3-1.4 via patch
sys/dev/pci/ixgbe/ixgbe_x540.c 1.1-1.2 via patch
sys/dev/pci/ixgbe/ixgbe_x540.h 1.1 via patch
sys/dev/pci/ixgbe/ixv.c 1.5-1.7 via patch
sys/dev/pci/ixgbe/ixv.h 1.4-1.5 via patch
Synchronize our ixg(4) driver up to FreeBSD r243716:
- Add X540 support.
- Add TSO6 support.
- Add 100BaseTX support.
- The max size in dma tag is changed from 65535 to 262140 (IXGBE_TSO_SIZE).
The value is the same as other *BSDs. The change might cause a address
space shortage (ixgbe_dmamap_create() might fail) on some machines.
- Show 1000Base-SX correctly.
- Fix if_baudrate from 1G to 10G.
- Fix a bug that ifconfig -z (SOICZIFDATA) doesn't work.
- Fix a lot of bugs.
- Improve performance.
[msaitoh, ticket #697]
|
| 1.1.12.1 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.5.2.1 |
| 07-Jan-2017 |
pgoyette | Sync with HEAD. (Note that most of these changes are simply $NetBSD$
tag issues.)
|
| 1.8.8.8 |
| 23-Jan-2023 |
martin | Pull up the following revisions, requested by msaitoh in ticket #1796:
sys/dev/pci/files.pci 1.442
sys/dev/pci/ixgbe/ix_txrx.c 1.99-1.100
sys/dev/pci/ixgbe/ixgbe.c 1.320-1.324 via patch
sys/dev/pci/ixgbe/ixgbe_82598.c 1.19
sys/dev/pci/ixgbe/ixgbe_api.c 1.28
sys/dev/pci/ixgbe/ixgbe_common.c 1.43
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.17
sys/dev/pci/ixgbe/ixv.c 1.183
- Add an option for Tx to use deferred softint regardless of whether
can get txq lock or not. It's off by default.
- Call txeof first, then rxeof for the consistency.
- Make three "Unsupported SFP+ module..." messages the same.
- KNF. Modify comment. Fix typo.
|
| 1.8.8.7 |
| 30-Jan-2022 |
martin | Pull up the following, requested by msaitoh in ticket #1729:
sys/dev/pci/ixgbe/if_sriov.c 1.12-1.16
sys/dev/pci/ixgbe/ixgbe.c 1.295-1.297,1.300,1.304 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.84
sys/dev/pci/ixgbe/ixgbe_82598.c 1.17-1.18
sys/dev/pci/ixgbe/ixgbe_82598.h 1.9
sys/dev/pci/ixgbe/ixgbe_82599.c 1.24-1.28
sys/dev/pci/ixgbe/ixgbe_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_api.c 1.26-1.27
sys/dev/pci/ixgbe/ixgbe_api.h 1.16
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.3
sys/dev/pci/ixgbe/ixgbe_common.c 1.34-1.42
sys/dev/pci/ixgbe/ixgbe_common.h 1.15-1.16
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.12-1.13
sys/dev/pci/ixgbe/ixgbe_dcb.h 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.10-1.12
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.8
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.4
sys/dev/pci/ixgbe/ixgbe_features.h 1.4
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.13-1.15
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.15-1.18
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.5
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.8
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.31
sys/dev/pci/ixgbe/ixgbe_phy.c 1.25-1.29
sys/dev/pci/ixgbe/ixgbe_phy.h 1.13
sys/dev/pci/ixgbe/ixgbe_rss.h 1.6
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.5
sys/dev/pci/ixgbe/ixgbe_type.h 1.51-1.54
sys/dev/pci/ixgbe/ixgbe_vf.c 1.28-1.29
sys/dev/pci/ixgbe/ixgbe_vf.h 1.15
sys/dev/pci/ixgbe/ixgbe_x540.c 1.20-1.22
sys/dev/pci/ixgbe/ixgbe_x540.h 1.10
sys/dev/pci/ixgbe/ixgbe_x550.c 1.21-1.25
sys/dev/pci/ixgbe/ixgbe_x550.h 1.7
sys/dev/pci/ixgbe/ixv.c 1.170, 1.174-1.175 via patch
- Add typecast for type mismatch.
- Fix retry count calculation of I2C read/write.
- Wait longer for link after fiber MAC setup.
- ixv(4): Use adapter->mta for the multicast array memory instead of
the on-stack array.
- Match X550_PHY_ID correctly on X550.
- Print NVM image version on 82598.
- Use 64bit for lxon + lxoff.
- Don't expose garbage data of hw.ixvN.debug.
- Some NetBSD unrelated changes:
- Fix infinite recursion on PCIe link down if VMDQ is used.
- Move PF mailbox initialization from ixgbe_attach() to
ixgbe_init_iov().
- Add IPv6 mask for flow director.
- Change error level in ixgbe_fc_autoneg().
- Check host interface return status when writing NVM.
- Change DCB credit parameters.
- Restore some mailbox related functions. Revert part of ixgbe_mbx.c
rev. 1.7 and ixgbe_mbx.h rev. 1.11. No functional change.
- Rename IXGBE_VT_MSGTYPE_{ACK,NACK} to
IXGBE_VT_MSGTYPE_{SUCCESS,FAILURE}. No functional change.
- Remove unused argument. Change argument.
- Remove unnecessary return value check.
- Remove debug error message.
- Remove dead code.
- Add some unused macros.
- Fix typo in comment.
- Rename some functions.
- Sort lines, modify comment.
- Whitespace fix.
|
| 1.8.8.6 |
| 15-Sep-2021 |
martin | Pull up the following (all via patch), requested by msaitoh in ticket #1696:
sysdev/pci/ixgbe/ixgbe.c 1.252, 1.280-1.283, 1.286-1.287, 1.289-1.290 via patch
sysdev/pci/ixgbe/ixgbe.h 1.73, 1.76-1.80 via patch
sysdev/pci/ixgbe/ix_txrx.c 1.68-1.93
sysdev/pci/ixgbe/ixv.c 1.153, 1.157-1.161, 1.163-1.166 via patch
sysdev/pci/ixgbe/if_bypass.c 1.7-1.9
sysdev/pci/ixgbe/if_fdir.c 1.4-1.5
sysdev/pci/ixgbe/if_sriov.c 1.10-1.11
sysdev/pci/ixgbe/ixgbe_82598.c 1.16
sysdev/pci/ixgbe/ixgbe_82599.c 1.23
sysdev/pci/ixgbe/ixgbe_api.c 1.25
sysdev/pci/ixgbe/ixgbe_bypass.h 1.2
sysdev/pci/ixgbe/ixgbe_common.c 1.30-1.33
sysdev/pci/ixgbe/ixgbe_dcb.c 1.10-1.11
sysdev/pci/ixgbe/ixgbe_dcb.h 1.7
sysdev/pci/ixgbe/ixgbe_dcb_82598.c 1.8-1.9
sysdev/pci/ixgbe/ixgbe_dcb_82598.h 1.7
sysdev/pci/ixgbe/ixgbe_dcb_82599.c 1.8-1.9
sysdev/pci/ixgbe/ixgbe_dcb_82599.h 1.7
sysdev/pci/ixgbe/ixgbe_fdir.h 1.3
sysdev/pci/ixgbe/ixgbe_features.h 1.3
sysdev/pci/ixgbe/ixgbe_mbx.c 1.12
sysdev/pci/ixgbe/ixgbe_netbsd.c 1.16-1.17
sysdev/pci/ixgbe/ixgbe_netbsd.h 1.13-1.14
sysdev/pci/ixgbe/ixgbe_netmap.c 1.3-1.4
sysdev/pci/ixgbe/ixgbe_netmap.h 1.2
sysdev/pci/ixgbe/ixgbe_osdep.c 1.7
sysdev/pci/ixgbe/ixgbe_osdep.h 1.29-1.30
sysdev/pci/ixgbe/ixgbe_phy.c 1.24
sysdev/pci/ixgbe/ixgbe_rss.h 1.5
sysdev/pci/ixgbe/ixgbe_sriov.h 1.4
sysdev/pci/ixgbe/ixgbe_type.h 1.49
sysdev/pci/ixgbe/ixgbe_vf.c 1.27
sysdev/pci/ixgbe/ixgbe_x540.c 1.18-1.19
sysdev/pci/ixgbe/ixgbe_x540.h 1.9
sysdev/pci/ixgbe/ixgbe_x550.c 1.19-1.20
sysdev/pci/ixgbe/ixgbe_x550.h 1.6
sysdev/pci/files.pci 1.438
share/man/man4/ixg.4 1.15
share/man/man4/ixv.4 1.8
- Use MCLGET() instead of homegrown cluster (jcl) allocation mechanism.
Before this commit, resource shortage was easily occurred because
the total number of the clusters is small.
- Improve performance:
- Use m_adj(ETHER_ALIGN) more.
- Sprinkle __predict_false() in the RX path.
- Don't pre-allocate a cluster for RXCOPY case to improve short
packet's performance.
- Call bus_dmamap_unload(9) via ixgbe_dmamap_unload(), before freeing
DMA buffer. Also, when the buffer is already freed, do not call
bus_dmamap_unload(9) (no resource leaks with this change). This
change is required to make ixg(4) work on alpha.
- Keep m_len and m_pkthdr.len consistent to prevent panic on arm.
- Fix panic when bus_dmamap_load_mbuf() failed in
ixgbe_setup_receive_ring().
- Added BUS_DMA_COHERENT flag to bus_dmamem_map() to improve stability
on aarch64.
- Use uint64_t instead of bus_addr_t for the TX descriptor's buffer
address. At least, this change is required for macppc
(sizeof(bus_addr_t) == 4) to make TX work.
- Fix little-endian dependence.
- Set rxr->next_to_refresh correctly in ixgbe_setup_receive_ring().
- Refresh unrefreshed descriptors' buffers correctly.
- Don't call bus_dmamap_sync with rx_mbuf_sz(== MCLBYTES) to prevent
panic.
- Save the discard_multidesc state to not to forget the state by
exiting rxeof().
- Add missing increment of no_mbuf error counter.
- Don't increment no_mbuf evcnt(9) when discarding multi-descriptor
packet.
- ixv: Modify error message to sync with ixgbe.c
- Print the error value of ixgbe_reset_hw() for debugging.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxr->next_to_check updating.
- Add new sysctl "rx_copy_len".
- Add a new sysctl to read rxr->next_to_refresh.
- Print error number when error occurred.
- Rename ix{gbe,v}_stop() with ix{gbe,v}_stop_locked(). No functional
change.
- Don't use fixed value.
- Comment out flow director processing in fast path.
- Add missing NetBSD RCS IDs and __KERNEL_RCSID()s.
- KNF.
- Fix typos.
|
| 1.8.8.5 |
| 02-Sep-2020 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #1601):
sys/dev/pci/ixgbe/ixgbe_82598.c: revision 1.13
sys/dev/pci/ixgbe/ixgbe.c: revision 1.219
sys/dev/pci/ixgbe/ixgbe_phy.c: revision 1.20
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.22
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.44
Add recovery code for unsupported SFP+.
Before this commit:
If an unsupported SFP module is inserted before booting, the driver attach
failed and there was no way to recover form it without rebooting or
detaching/reattaching driver (drvctl -d && drvctl -r pciN).
After this commit:
We can automatically recover any time by replacing it with a supported
module.
|
| 1.8.8.4 |
| 05-Aug-2020 |
martin | Pull up the following revisions, requested by msaitoh in ticket #1587:
sys/dev/pci/ixgbe/ix_txrx.c 1.62-1.63 via patch
sys/dev/pci/ixgbe/ixgbe.c 1.225, 1.228-1.229,
1.232 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.64, 1.66
sys/dev/pci/ixgbe/ixv.c 1.146, 1.148-1.150
via patch
sys/dev/pci/ixgbe/ixgbe_common.c 1.27
sys/dev/pci/ixgbe/ixgbe_vf.c 1.23
sys/dev/pci/ixgbe/ixgbe_82598.c 1.15
sys/dev/pci/ixgbe/ixgbe_x550.c 1.18
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.14
sys/dev/pci/ixgbe/ixgbe_phy.c 1.21
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.26
- Fix IXGBE_LE32_TO_CPUS() macro for big endian machine. This problem
was only on X550.
- Add debug printf()s.
- Use unsigned to avoid undefined behavior in
ixgbe_fc_enable_generic().
- Modify a little to reduce diff between ixgbe.c and ixv.c.
No functional change.
- Modify comment.
- Remove unused macros.
- Whitespace fix.
- Fix typos.
|
| 1.8.8.3 |
| 24-Jan-2020 |
martin | Pull up the following, requested by msaitoh in ticket #1490:
sys/dev/pci/ixgbe/if_bypass.c 1.5
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.5
sys/dev/pci/ixgbe/ix_txrx.c 1.58-1.60
sys/dev/pci/ixgbe/ixgbe.c 1.195,1.220-1.221 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.60-1.2
sys/dev/pci/ixgbe/ixgbe_api.c 1.24
sys/dev/pci/ixgbe/ixgbe_common.c 1.26
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.11-1.12
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.24
sys/dev/pci/ixgbe/ixgbe_phy.c 1.19
sys/dev/pci/ixgbe/ixgbe_82598.c 1.14
sys/dev/pci/ixgbe/ixv.c 1.122,1.142,1.144 via patch
- Use unsigned to avoid undefined behavior in
ix{gbe,v}_[un]register_vlan().
- Free RX structure correctly when detaching.
- Remove unused code.
- Remove extra spaces.
- Fix some typos in comment.
- KNF.
|
| 1.8.8.2 |
| 14-Apr-2018 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #750):
sys/dev/pci/ixgbe/ixgbe_x540.h: revision 1.8
sys/dev/pci/ixgbe/ixgbe_82598.c: revision 1.11
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: revision 1.6
sys/dev/pci/ixgbe/ixgbe_82598.c: revision 1.12
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: revision 1.7
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h: revision 1.6
sys/dev/pci/ixgbe/ixgbe_fdir.h: revision 1.2
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h: revision 1.6
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: revision 1.6
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.18
sys/dev/pci/ixgbe/if_sriov.c: revision 1.3
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: revision 1.7
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.19
sys/dev/pci/ixgbe/ixgbe_mbx.h: revision 1.13
sys/dev/pci/ixgbe/ixgbe_dcb.c: revision 1.7
sys/dev/pci/ixgbe/ixgbe_api.c: revision 1.19
sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.16
sys/dev/pci/ixgbe/ixgbe_dcb.c: revision 1.8
sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe_dcb.h: revision 1.6
sys/dev/pci/ixgbe/if_bypass.c: revision 1.4
sys/dev/pci/ixgbe/ixv.c: revision 1.91
sys/dev/pci/ixgbe/ixgbe_rss.h: revision 1.4
sys/dev/pci/ixgbe/ixv.c: revision 1.92
sys/dev/pci/ixgbe/ixv.c: revision 1.93
sys/dev/pci/ixgbe/ixgbe_osdep.c: revision 1.4
sys/dev/pci/ixgbe/ixgbe_common.h: revision 1.12
sys/dev/pci/ixgbe/ixgbe_common.h: revision 1.13
sys/dev/pci/ixgbe/ixgbe_api.h: revision 1.13
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.12
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.33
sys/dev/pci/ixgbe/if_fdir.c: revision 1.2
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.34
sys/dev/pci/ixgbe/ix_txrx.c: revision 1.39
sys/dev/pci/ixgbe/ixgbe_vf.h: revision 1.13
sys/dev/pci/ixgbe/ixgbe_api.c: revision 1.20
sys/dev/pci/ixgbe/ixgbe_sriov.h: revision 1.3
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.21
sys/dev/pci/ixgbe/ixgbe_osdep.h: revision 1.21
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.22
sys/dev/pci/ixgbe/ixgbe_82599.h: revision 1.7
sys/dev/pci/ixgbe/ixgbe.c: revision 1.144
sys/dev/pci/ixgbe/ixgbe.c: revision 1.145
sys/dev/pci/ixgbe/ixgbe_phy.c: revision 1.16
sys/dev/pci/ixgbe/ixgbe.c: revision 1.146
sys/dev/pci/ixgbe/ixgbe_phy.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe_82598.h: revision 1.8
sys/dev/pci/ixgbe/ixgbe.h: revision 1.41
sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.10
sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.14
sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.15
sys/dev/pci/ixgbe/ixgbe_phy.h: revision 1.11
Sync with the remaining part of FreeBSD r328265 except sfp_reinit stuff:
- Always schedule module intterrupt in ixgbe_config_link() when a device is
SFP+ based.
- Use not loop index but txr->me in ixv_initialize_{transmit,receive}_units().
It's required for VMDQ but NetBSD doesn't use it, so it's not a bug in
NetBSD.
- Simplify ixgbe_bp_wd_set(). No functional change.
- Whitespace.
Sync with FreeBSD r331224 except ixv_if_update_admin_status()'s change:
- Fix length of reading buffer when the command is Read Flash in
ixgbe_host_interface_command().
- Add missing start_hw() call in ixv_init_locked(). This is not a real bug
because start_hw just set hw->adapter_stopped to false and anyone refer it.
- Style change.
- Update comment.
Read sc_if_flags after taking core lock. Same as if_wm.c rev. 1.418.
|
| 1.8.8.1 |
| 21-Dec-2017 |
snj | Pull up following revision(s) (requested by msaitoh in ticket #441):
sys/dev/pci/files.pci: 1.390
sys/dev/pci/ixgbe/if_bypass.c: new
sys/dev/pci/ixgbe/if_fdir.c: new
sys/dev/pci/ixgbe/if_sriov.c: new
sys/dev/pci/ixgbe/ixgbe_bypass.h: new
sys/dev/pci/ixgbe/ixgbe_fdir.h: new
sys/dev/pci/ixgbe/ixgbe_features.h: new
sys/dev/pci/ixgbe/ixgbe_netmap.c: new
sys/dev/pci/ixgbe/ixgbe_netmap.h: new
sys/dev/pci/ixgbe/ixgbe_rss.h: new
sys/dev/pci/ixgbe/ixgbe_sriov.h: new
sys/dev/pci/ixgbe/ix_txrx.c: 1.28, 1.30 via patch
sys/dev/pci/ixgbe/ixgbe.c: 1.97-1.105, 1.107-1.111, 1.113-1.115
sys/dev/pci/ixgbe/ixgbe.h: 1.26-1.29 via patch
sys/dev/pci/ixgbe/ixv.c: 1.57-1.58, 1.60-1.61, 1.63-1.64, 1.66-1.72, 1.75 via patch
sys/dev/pci/ixgbe/ixgbe_api.c: 1.17-1.18 via patch
sys/dev/pci/ixgbe/ixgbe_type.h: 1.26-1.30 via patch
sys/dev/pci/ixgbe/ixgbe_82598.c: 1.9-1.10 via patch
sys/dev/pci/ixgbe/ixgbe_82598.h: 1.6-1.7
sys/dev/pci/ixgbe/ixgbe_82599.c: 1.15-1.16 via patch
sys/dev/pci/ixgbe/ixgbe_82599.h: 1.5-1.6
sys/dev/pci/ixgbe/ixgbe_api.h: 1.10-1.11 via patch
sys/dev/pci/ixgbe/ixgbe_common.c: 1.14-1.16 via patch
sys/dev/pci/ixgbe/ixgbe_common.h: 1.8-1.9 via patch
sys/dev/pci/ixgbe/ixgbe_dcb.c: 1.5-1.6
sys/dev/pci/ixgbe/ixgbe_dcb.h: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_mbx.c: 1.7-1.9 via patch
sys/dev/pci/ixgbe/ixgbe_mbx.h: 1.11-1.12 via patch
sys/dev/pci/ixgbe/ixgbe_osdep.c: 1.2
sys/dev/pci/ixgbe/ixgbe_osdep.h: 1.18-1.19 via patch
sys/dev/pci/ixgbe/ixgbe_phy.c: 1.12-1.14 via patch
sys/dev/pci/ixgbe/ixgbe_phy.h: 1.9-1.10 via patch
sys/dev/pci/ixgbe/ixgbe_vf.c: 1.13-1.15 via patch
sys/dev/pci/ixgbe/ixgbe_vf.h: 1.9-1.11 via patch
sys/dev/pci/ixgbe/ixgbe_x540.c: 1.10-1.12
sys/dev/pci/ixgbe/ixgbe_x540.h: 1.6-1.7
sys/dev/pci/ixgbe/ixgbe_x550.c: 1.6-1.7
sys/dev/pci/ixgbe/ixgbe_x550.h: 1.3
Sync with FreeBSD's up to r326022, fix bugs and some improvements:
- Don't limit number of queue pair to 8. Take chip's max TX queues and
max RX queues into account.
- Add C3000 (Denverton) support.
- Add bypass function support for bypass adapters.
- Change EEE sysctl.
- Remove thermal test sysctl.
- ixv(4): set RSS mapping.
- ixv(4): Add TSOv6.
- ixv(4): Fix hardware counter.
- ixv(4): Make TX/RX descriptors size the same as ixg(4).
- ixv(4): Print device name in ixv_attach().
- ixv(4): Make mailbox statistic counters evcnt(9).
- ixv(4): Fix a problem that mailbox interrupt never occurred.
- ixv(4): Don't check neither VTEICR nor VTEICS same as Linux. It
seems that both registers can't be used to check which MSI-X vector
is triggered.
- ixv(4): Print Mailbox API version.
- Print driver feature capabilities and enable bits when verbose boot.
- Fix a bug that X550EM_A (Denverton) can't force 10BaseT.
- Remove all half-duplex setting because of the chip specification.
- Add 2.5GBASE-T and 5GBASE-T support.
- Set ifm_baudrate correctly.
- Protect ec_multi* with mutex like other MP safe Ethernet drivers.
- On X550 and newer, print NVM Image Version with %u.%02x.
- On X540, print PHY FW Revision with %u.%x. 0x4030 will be printed
as "Revision 4.3 ID 0x0"
- Fix value check of OEM_NVM_IMAGE_VER.
- Print PHY ID only for copper PHY.
- Fix a bug that X550 and newer didn't linkup if it forces
100BaseTX-FDX or 10BaseT-FDX.
- Fix a bug that RX may accesses freed area. It also fixes a problem
that if_init() takes long time on many core machine.
- Check ETHERCAP_VLAN_HWTAGGING in ixgbe_setup_vlan_hw_support(). This
change has no influence to netbsd because it's enabled by default
and NetBSD has no API to disable it.
- Whitespace fix.
|
| 1.10.2.1 |
| 07-Apr-2018 |
pgoyette | Sync with HEAD. 77 conflicts resolved - all of them $NetBSD$
|
| 1.12.8.6 |
| 23-Jan-2023 |
martin | Pull up the following revisions, requested by msaitoh in ticket #1579:
sys/dev/pci/files.pci 1.442
sys/dev/pci/ixgbe/ix_txrx.c 1.99-1.100
sys/dev/pci/ixgbe/ixgbe.c 1.320-1.324 via patch
sys/dev/pci/ixgbe/ixgbe_82598.c 1.19
sys/dev/pci/ixgbe/ixgbe_api.c 1.28
sys/dev/pci/ixgbe/ixgbe_common.c 1.43
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.17
sys/dev/pci/ixgbe/ixv.c 1.183
- Add an option for Tx to use deferred softint regardless of whether
can get txq lock or not. It's off by default.
- Call txeof first, then rxeof for the consistency.
- Make three "Unsupported SFP+ module..." messages the same.
- KNF. Modify comment. Fix typo.
|
| 1.12.8.5 |
| 30-Jan-2022 |
martin | Pull up the following revisions, requested by msaitoh in ticket #1414:
sys/dev/pci/ixgbe/if_sriov.c 1.12-1.16
sys/dev/pci/ixgbe/ixgbe.c 1.295-1.297,1.300,1.304 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.84
sys/dev/pci/ixgbe/ixgbe_82598.c 1.17-1.18
sys/dev/pci/ixgbe/ixgbe_82598.h 1.9
sys/dev/pci/ixgbe/ixgbe_82599.c 1.24-1.28
sys/dev/pci/ixgbe/ixgbe_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_api.c 1.26-1.27
sys/dev/pci/ixgbe/ixgbe_api.h 1.16
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.3
sys/dev/pci/ixgbe/ixgbe_common.c 1.34-1.42
sys/dev/pci/ixgbe/ixgbe_common.h 1.15-1.16
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.12-1.13
sys/dev/pci/ixgbe/ixgbe_dcb.h 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.10-1.12
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.8
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.4
sys/dev/pci/ixgbe/ixgbe_features.h 1.4
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.13-1.15
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.15-1.18
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.5
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.8
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.31
sys/dev/pci/ixgbe/ixgbe_phy.c 1.25-1.29
sys/dev/pci/ixgbe/ixgbe_phy.h 1.13
sys/dev/pci/ixgbe/ixgbe_rss.h 1.6
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.5
sys/dev/pci/ixgbe/ixgbe_type.h 1.51-1.54
sys/dev/pci/ixgbe/ixgbe_vf.c 1.28-1.29
sys/dev/pci/ixgbe/ixgbe_vf.h 1.15
sys/dev/pci/ixgbe/ixgbe_x540.c 1.20-1.22
sys/dev/pci/ixgbe/ixgbe_x540.h 1.10
sys/dev/pci/ixgbe/ixgbe_x550.c 1.21-1.25
sys/dev/pci/ixgbe/ixgbe_x550.h 1.7
sys/dev/pci/ixgbe/ixv.c 1.170, 1.174-1.175 via patch
- Add typecast for type mismatch.
- Fix retry count calculation of I2C read/write.
- Wait longer for link after fiber MAC setup.
- ixv(4): Use adapter->mta for the multicast array memory instead of
the on-stack array.
- Match X550_PHY_ID correctly on X550.
- Print NVM image version on 82598.
- Use 64bit for lxon + lxoff.
- Don't expose garbage data of hw.ixvN.debug.
- Some NetBSD unrelated changes:
- Fix infinite recursion on PCIe link down if VMDQ is used.
- Move PF mailbox initialization from ixgbe_attach() to
ixgbe_init_iov().
- Add IPv6 mask for flow director.
- Change error level in ixgbe_fc_autoneg().
- Check host interface return status when writing NVM.
- Change DCB credit parameters.
- Restore some mailbox related functions. Revert part of ixgbe_mbx.c
rev. 1.7 and ixgbe_mbx.h rev. 1.11. No functional change.
- Rename IXGBE_VT_MSGTYPE_{ACK,NACK} to
IXGBE_VT_MSGTYPE_{SUCCESS,FAILURE}. No functional change.
- Remove unused argument. Change argument.
- Remove unnecessary return value check.
- Remove debug error message.
- Remove dead code.
- Add some unused macros.
- Fix typo in comment.
- Rename some functions.
- Sort lines, modify comment.
- Whitespace fix.
|
| 1.12.8.4 |
| 15-Sep-2021 |
martin | Pull up the following (via patch), requested by msaitoh in ticket #1346:
sys/dev/pci/ixgbe/ixgbe.c 1.252, 1.280-1.283, 1.286-1.287, 1.289-1.290 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.73, 1.76-1.80 via patch
sys/dev/pci/ixgbe/ix_txrx.c 1.68-1.93
sys/dev/pci/ixgbe/ixv.c 1.153, 1.157-1.161, 1.163-1.166 via patch
sys/dev/pci/ixgbe/if_bypass.c 1.7-1.9
sys/dev/pci/ixgbe/if_fdir.c 1.4-1.5
sys/dev/pci/ixgbe/if_sriov.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_82598.c 1.16
sys/dev/pci/ixgbe/ixgbe_82599.c 1.23
sys/dev/pci/ixgbe/ixgbe_api.c 1.25
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.2
sys/dev/pci/ixgbe/ixgbe_common.c 1.30-1.33
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_dcb.h 1.7
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.7
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.7
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.3
sys/dev/pci/ixgbe/ixgbe_features.h 1.3
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.12
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.13, 1.16-1.17
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.13-1.14
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.3-1.4
sys/dev/pci/ixgbe/ixgbe_netmap.h 1.2
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.7
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.29-1.30
sys/dev/pci/ixgbe/ixgbe_phy.c 1.24
sys/dev/pci/ixgbe/ixgbe_rss.h 1.5
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.4
sys/dev/pci/ixgbe/ixgbe_type.h 1.49
sys/dev/pci/ixgbe/ixgbe_vf.c 1.27
sys/dev/pci/ixgbe/ixgbe_x540.c 1.18-1.19
sys/dev/pci/ixgbe/ixgbe_x540.h 1.9
sys/dev/pci/ixgbe/ixgbe_x550.c 1.19-1.20
sys/dev/pci/ixgbe/ixgbe_x550.h 1.6
sys/dev/pci/files.pci 1.438
share/man/man4/ixg.4 1.15
share/man/man4/ixv.4 1.8
- Use MCLGET() instead of homegrown cluster (jcl) allocation mechanism.
Before this commit, resource shortage was easily occurred because
the total number of the clusters is small.
- Improve performance:
- Use m_adj(ETHER_ALIGN) more.
- Sprinkle __predict_false() in the RX path.
- Don't pre-allocate a cluster for RXCOPY case to improve short
packet's performance.
- Call bus_dmamap_unload(9) via ixgbe_dmamap_unload(), before freeing
DMA buffer. Also, when the buffer is already freed, do not call
bus_dmamap_unload(9) (no resource leaks with this change). This
change is required to make ixg(4) work on alpha.
- Keep m_len and m_pkthdr.len consistent to prevent panic on arm.
- Fix panic when bus_dmamap_load_mbuf() failed in
ixgbe_setup_receive_ring().
- Added BUS_DMA_COHERENT flag to bus_dmamem_map() to improve stability
on aarch64.
- Use uint64_t instead of bus_addr_t for the TX descriptor's buffer
address. At least, this change is required for macppc
(sizeof(bus_addr_t) == 4) to make TX work.
- Fix little-endian dependence.
- Set rxr->next_to_refresh correctly in ixgbe_setup_receive_ring().
- Refresh unrefreshed descriptors' buffers correctly.
- Don't call bus_dmamap_sync with rx_mbuf_sz(== MCLBYTES) to prevent
panic.
- Save the discard_multidesc state to not to forget the state by
exiting rxeof().
- Add missing increment of no_mbuf error counter.
- Don't increment no_mbuf evcnt(9) when discarding multi-descriptor
packet.
- ixv: Modify error message to sync with ixgbe.c
- Print the error value of ixgbe_reset_hw() for debugging.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxr->next_to_check updating.
- Add new sysctl "rx_copy_len".
- Add a new sysctl to read rxr->next_to_refresh.
- Print error number when error occurred.
- Rename ix{gbe,v}_stop() with ix{gbe,v}_stop_locked(). No functional
change.
- Don't use fixed value.
- Comment out flow director processing in fast path.
- Add missing NetBSD RCS IDs and __KERNEL_RCSID()s.
- KNF.
- Fix typos.
|
| 1.12.8.3 |
| 10-Jul-2020 |
martin | Pull up the following revisions, requested by msaitoh in ticket #997:
sys/dev/pci/ixgbe/ix_txrx.c 1.62-1.63 via patch
sys/dev/pci/ixgbe/ixgbe.c 1.225, 1.228-1.229,
1.232 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.64, 1.66
sys/dev/pci/ixgbe/ixv.c 1.146, 1.148-1.150
sys/dev/pci/ixgbe/ixgbe_common.c 1.27
sys/dev/pci/ixgbe/ixgbe_vf.c 1.23
sys/dev/pci/ixgbe/ixgbe_82598.c 1.15
sys/dev/pci/ixgbe/ixgbe_x550.c 1.18
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.14
sys/dev/pci/ixgbe/ixgbe_phy.c 1.21
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.26
- Fix IXGBE_LE32_TO_CPUS() macro for big endian machine. This problem
was only on X550*.
- Add debug printf()s.
- Use unsigned to avoid undefined behavior in
ixgbe_fc_enable_generic().
- Modify a little to reduce diff between ixgbe.c and ixv.c.
No functional change.
- Modify comment.
- Remove unused macros.
- Whitespace fix.
- Fix typos.
|
| 1.12.8.2 |
| 28-Jan-2020 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #664):
sys/dev/pci/ixgbe/ixgbe_82598.c: revision 1.13
sys/dev/pci/ixgbe/ixgbe.c: revision 1.219
sys/dev/pci/ixgbe/ixgbe_phy.c: revision 1.20
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.22
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.44
Add recovery code for unsupported SFP+.
Before this commit:
If an unsupported SFP module is inserted before booting, the driver attach
failed and there was no way to recover form it without rebooting or
detaching/reattaching driver (drvctl -d && drvctl -r pciN).
After this commit:
We can automatically recover any time by replacing it with a supported
module.
|
| 1.12.8.1 |
| 26-Jan-2020 |
martin | Pull up the following (via patch), requested by msaitoh in ticket #648
sys/dev/pci/ixgbe/if_bypass.c 1.5
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.5
sys/dev/pci/ixgbe/ix_txrx.c 1.58-1.60
sys/dev/pci/ixgbe/ixgbe.c 1.220-1.221
sys/dev/pci/ixgbe/ixgbe.h 1.60-1.2
sys/dev/pci/ixgbe/ixgbe_api.c 1.24
sys/dev/pci/ixgbe/ixgbe_common.c 1.26
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.11-1.12
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.24
sys/dev/pci/ixgbe/ixgbe_phy.c 1.19
sys/dev/pci/ixgbe/ixgbe_82598.c 1.14
sys/dev/pci/ixgbe/ixv.c 1.142,1.144
- Free RX structure correctly when detaching.
- Remove unused code.
- Fix some typos in comment.
- Remove extra spaces.
- KNF.
|
| 1.12.2.1 |
| 08-Apr-2020 |
martin | Merge changes from current as of 20200406
|
| 1.15.6.1 |
| 13-May-2021 |
thorpej | Sync with HEAD.
|
