| History log of /src/sys/dev/usb/if_kue.c |
| Revision | | Date | Author | Comments |
| 1.119 |
| 20-Aug-2022 |
riastradh | usbnet(9): New usbnet_ispromisc(un).
Replaces ifp->if_flags & IFF_PROMISC in multicast filter updates.
|
| 1.118 |
| 03-Mar-2022 |
riastradh | usbnet: Omit needless detachcv name parameter to usbnet_attach.
|
| 1.117 |
| 03-Mar-2022 |
riastradh | usbnet: Factor usbnet_init_rx_tx out into usbnet_if_init.
Make it private; no need for drivers to call it any more.
|
| 1.116 |
| 03-Mar-2022 |
riastradh | usbnet drivers: From *_uno_init, call *_uno_stop, not usbnet_stop.
Make usbnet_stop private now that no drivers use it.
None of the driver-independent logic in usbnet_stop has any effect at
this point because we are guaranteed not to be running, so only the
driver-dependent logic in *_uno_stop (at most) is needed.
For drivers with no *_uno_stop, just omit the call to usbnet_stop
altogether.
Some of this logic is obviously redundant with the subsequent call to
*_reset -- to be addressed in a subsequent commit.
|
| 1.115 |
| 03-Mar-2022 |
riastradh | usbnet drivers: Omit needless isdying tests in *_uno_init.
usbnet(9) already checks this immediately before calling *_uno_init.
|
| 1.114 |
| 03-Mar-2022 |
riastradh | usbnet drivers: Omit redundant multicast filter update on init.
|
| 1.113 |
| 03-Mar-2022 |
riastradh | usbnet drivers: Stop abusing ifp->if_flags & IFF_ALLMULTI.
This legacy flag is a figment of userland's imagination. The actual
kernel state is ec->ec_flags & ETHER_F_ALLMULTI, protected by the
ETHER_LOCK, so that multicast filter updates -- which run without
IFNET_LOCK -- need not attempt to write racily to ifp->if_flags.
|
| 1.112 |
| 03-Mar-2022 |
riastradh | usbnet drivers: Omit needless uno_mcast locked subroutines.
uno_mcast is now called with the core lock already held so there is
no need for a separate locked subroutine.
|
| 1.111 |
| 03-Mar-2022 |
riastradh | usbnet: Take the core lock around uno_mcast.
Every driver does this already. This will enable us to change the
lock that serializes access to the registers so we can go back to
doing this synchronously in SIOCADDMULTI/SIOCDELMULTI.
|
| 1.110 |
| 03-Mar-2022 |
riastradh | usbnet drivers: Omit needless uno_init locked subroutines.
uno_init is now called with the core lock already held so there is no
need for a separate locked subroutine.
|
| 1.109 |
| 03-Mar-2022 |
riastradh | usbnet drivers: No need for usbnet_busy in uno_mcast.
This callback always runs with IFNET_LOCK held, and during a task
that usbnet_detach prevents scheduling anew and waits for finishing
before completing the detach, so there is no need to hang onto a
reference count here.
|
| 1.108 |
| 03-Mar-2022 |
riastradh | usbnet drivers: No need for usbnet_busy in uno_init.
This callback always runs with the IFNET_LOCK held, and the interface
cannot be detached until the IFNET_LOCK is released, so there is no
need to hang onto a reference count here. (None of the usbnet
drivers touch the IFNET_LOCK except to verify it is held sometimes.)
|
| 1.107 |
| 03-Mar-2022 |
riastradh | usbnet: Split multicast filter reprogramming into separate operation.
|
| 1.106 |
| 03-Mar-2022 |
riastradh | usbnet: Enter uno_init with the core lock held.
This reduces code in all drivers except urndis(4) and aue(4).
However, it's still safe for urndis to drop the core lock because the
ifnet is locked, and the ifnet lock covers the DOWN->UP (uno_init)
and UP->DOWN (uno_stop) transitions.
|
| 1.105 |
| 13-Jun-2021 |
mlelstv | Align product name.
|
| 1.104 |
| 21-Mar-2020 |
skrll | branches: 1.104.8;
KNF
|
| 1.103 |
| 15-Mar-2020 |
thorpej | Define and implement a locking protocol for the ifmedia / mii layers:
- MP-safe drivers provide a mutex to ifmedia that is used to serialize
access to media-related structures / hardware regsiters. Converted
drivers use the new ifmedia_init_with_lock() function for this. The
new name is provided to ease the transition.
- Un-converted drivers continue to call ifmedia_init(), which will supply
a compatibility lock to be used instead. Several media-related entry
points must be aware of this compatibility lock, and are able to acquire
it recursively a limited number of times, if needed. This is a SPIN
mutex with priority IPL_NET.
- This same lock is used to serialize access to PHY registers and other
MII-related data structures.
The PHY drivers are modified to acquire and release the lock, as needed,
and assert the lock is held as a diagnostic aid.
The "usbnet" framework has had an overhaul of its internal locking
protocols to fit in with the media / mii changes, and the drivers adapted.
USB wifi drivers have been changed to provide their own adaptive mutex
to the ifmedia later via a new ieee80211_media_init_with_lock() function.
This is required because the USB drivers need an adaptive mutex.
Besised "usbnet", a few other drivers are converted: vmx, wm, ixgbe / ixv.
mcx also now calls ifmedia_init_with_lock() because it needs to also use
an adaptive mutex. The mcx driver still needs to be fully converted to
NET_MPSAFE.
|
| 1.102 |
| 29-Jan-2020 |
thorpej | Adopt <net/if_stats.h>.
|
| 1.101 |
| 07-Jan-2020 |
maxv | branches: 1.101.2;
Localify, constify.
|
| 1.100 |
| 20-Aug-2019 |
mrg | couple more changes to usbnet(9):
- MII read/write reg return int instead of usbd_status (requested by skrll)
- usbnet_attach_ifp(9) changes arg, two mii-specific flags are placed by a
pointer to new struct usbnet_mii. if not NULL, then attach an MII to this
interface like previous have_mii parameter. use this to allow ure(4) to
properly pass PHY location to mii_attach().
welcome netbsd 9.99.10.
|
| 1.99 |
| 18-Aug-2019 |
mrg | regen and add kue adapters:
ACTIONTEC KL5KUSB101 USB Ethernet adapter
ALLIEDTELESYN AT-USB10 USB Ethernet Adapter
SILICOM Psion Gold Port Ethernet (existing usbdevs entry)
|
| 1.98 |
| 16-Aug-2019 |
mrg | port kue(4) to usbnet(9). interesting notes:
- move KUE_RXFILT_PROMISC setting into kue_setiff() from kue_init()
to avoid multiple setting KUE_CMD_SET_PKT_FILTER reg multiple times
- software-only constructs moved from if_kuereg.h into if_kue.c
- kue is the first (umb(4) will need it to, i think) to have its own
autoconf detach routine remain
- un_tx_xfer_flags is 0 here, not USBD_FORCE_SHORT_XFER
- fix a potential data exposure (but probably not without a USB
protocol tap). kue needs the transfers to be 64-byte aligned, and
while i doubt it sends more than the frame provided, were sending
random kernel data (whatever was the 0-63 bytes to alignment) to
the device.
diffstat says:
2 files changed, 189 insertions(+), 739 deletions(-)
|
| 1.97 |
| 01-Aug-2019 |
mrg | remove unused code and use common ethernet media code where equivalent.
|
| 1.96 |
| 28-May-2019 |
msaitoh | branches: 1.96.2;
Use ETHER_LOCK()/ETHER_UNLOCK() for all ethernet drivers to protect ec_multi*.
|
| 1.95 |
| 23-May-2019 |
msaitoh | Whitespace fix (mainly tabify).
|
| 1.94 |
| 23-May-2019 |
msaitoh | -No functional change:
- KNF
- u_int*_t -> uint*_t.
|
| 1.93 |
| 05-May-2019 |
mrg | remove explicit 'extern struct cfdriver <my>_cd;' and use ioconf.h
|
| 1.92 |
| 26-Jun-2018 |
msaitoh | branches: 1.92.2;
Implement the BPF direction filter (BIOC[GS]DIRECTION). It provides backward
compatibility with BIOC[GS]SEESENT ioctl. The userland interface is the same
as FreeBSD.
This change also fixes a bug that the direction is misunderstand on some
environment by passing the direction to bpf_mtap*() instead of checking
m->m_pkthdr.rcvif.
|
| 1.91 |
| 21-Jan-2018 |
skrll | branches: 1.91.2;
PR kern/52931 Kernel panics with Atheros usb wireless interface
Audit the flags to usbd_create_xfer so that USBD_FORCE_SHORT_XFER is
supplied wherever such a transfer is setup. We can drop
USBD_SHORT_XFER_OK as it has not bearing on number of TDs
|
| 1.90 |
| 01-Jun-2017 |
chs | branches: 1.90.2;
remove checks for failure after memory allocation calls that cannot fail:
kmem_alloc() with KM_SLEEP
kmem_zalloc() with KM_SLEEP
percpu_alloc()
pserialize_create()
psref_class_create()
all of these paths include an assertion that the allocation has not failed,
so callers should not assert that again.
|
| 1.89 |
| 12-Jan-2017 |
maya | Appease coverity which is having nightmares about strings not being
null-terminated by using strlcpy rather than strncpy when it doesn't
matter.
ok christos.
|
| 1.88 |
| 15-Dec-2016 |
ozaki-r | Move bpf_mtap and if_ipackets++ on Rx of each driver to percpuq if_input
The benefits of the change are:
- We can reduce codes
- We can provide the same behavior between drivers
- Where/When if_ipackets is counted up
- Note that some drivers still update packet statistics in their own
way (periodical update)
- Moved bpf_mtap run in softint
- This makes it easy to MP-ify bpf
Proposed on tech-kern and tech-net
|
| 1.87 |
| 25-Nov-2016 |
skrll | +#include "opt_usb.h"
|
| 1.86 |
| 07-Jul-2016 |
msaitoh | branches: 1.86.2;
KNF. Remove extra spaces. No functional change.
|
| 1.85 |
| 10-Jun-2016 |
ozaki-r | Introduce m_set_rcvif and m_reset_rcvif
The API is used to set (or reset) a received interface of a mbuf.
They are counterpart of m_get_rcvif, which will come in another
commit, hide internal of rcvif operation, and reduce the diff of
the upcoming change.
No functional change.
|
| 1.84 |
| 23-Apr-2016 |
skrll | Merge nick-nhusb
- API / infrastructure changes to support memory management changes.
- Memory management improvements and bug fixes.
- HCDs should now be MP safe
- conversion to KERNHIST based debug
- FS/LS isoc support on ehci(4).
- conversion to kmem(9)
- Some USB 3 support - mostly from Takahiro HAYASHI (t-hash).
- interrupt transfers now get proper DMA operations
- general bug fixes
- kern/48308
- uhub status notification improvements
- umass(4) probe fix (applied to HEAD already)
- ohci(4) short transfer fix
|
| 1.83 |
| 09-Feb-2016 |
ozaki-r | Introduce softint-based if_input
This change intends to run the whole network stack in softint context
(or normal LWP), not hardware interrupt context. Note that the work is
still incomplete by this change; to that end, we also have to softint-ify
if_link_state_change (and bpf) which can still run in hardware interrupt.
This change softint-ifies at ifp->if_input that is called from
each device driver (and ieee80211_input) to ensure Layer 2 runs
in softint (e.g., ether_input and bridge_input). To this end,
we provide a framework (called percpuq) that utlizes softint(9)
and percpu ifqueues. With this patch, rxintr of most drivers just
queues received packets and schedules a softint, and the softint
dequeues packets and does rest packet processing.
To minimize changes to each driver, percpuq is allocated in struct
ifnet for now and that is initialized by default (in if_attach).
We probably have to move percpuq to softc of each driver, but it's
future work. At this point, only wm(4) has percpuq in its softc
as a reference implementation.
Additional information including performance numbers can be found
in the thread at tech-kern@ and tech-net@:
http://mail-index.netbsd.org/tech-kern/2016/01/14/msg019997.html
Acknowledgment: riastradh@ greatly helped this work.
Thank you very much!
|
| 1.82 |
| 13-Apr-2015 |
riastradh | Convert sys/dev to use <sys/rndsource.h>.
|
| 1.81 |
| 10-Aug-2014 |
tls | branches: 1.81.2; 1.81.4; 1.81.8;
Merge tls-earlyentropy branch into HEAD.
|
| 1.80 |
| 16-Oct-2013 |
skrll | branches: 1.80.2;
Apply patch from PR/48310 - kue(4) cannot receive multicast packets.
|
| 1.79 |
| 05-Jan-2013 |
christos | branches: 1.79.2;
- need opt_usb.h if depending on USB_DEBUG
- remove trailing whitespace
- add missing KERNEL_RCSID
|
| 1.78 |
| 27-Dec-2012 |
skrll | Consistent/Correct error message from failing usbd_set_config.
Use aprint_error_dev.
|
| 1.77 |
| 11-Mar-2012 |
mrg | branches: 1.77.2;
minor cleanups from usbmp:
- move usbd_delay_ms() into usbdivar.h in the usb_subr.c section
- minor rcsid fixes
- copyright maintenence
|
| 1.76 |
| 10-Mar-2012 |
mrg | remove checks against "!curproc".
|
| 1.75 |
| 02-Feb-2012 |
tls | Entropy-pool implementation move and cleanup.
1) Move core entropy-pool code and source/sink/sample management code
to sys/kern from sys/dev.
2) Remove use of NRND as test for presence of entropy-pool code throughout
source tree.
3) Remove use of RND_ENABLED in device drivers as microoptimization to
avoid expensive operations on disabled entropy sources; make the
rnd_add calls do this directly so all callers benefit.
4) Fix bug in recent rnd_add_data()/rnd_add_uint32() changes that might
have lead to slight entropy overestimation for some sources.
5) Add new source types for environmental sensors, power sensors, VM
system events, and skew between clocks, with a sample implementation
for each.
ok releng to go in before the branch due to the difficulty of later
pullup (widespread #ifdef removal and moved files). Tested with release
builds on amd64 and evbarm and live testing on amd64.
|
| 1.74 |
| 03-Nov-2010 |
dyoung | branches: 1.74.8; 1.74.12;
Stop using the compatibility macros USB_ATTACH(), USB_DETACH(),
USB_MATCH(), et cetera. These files produce the same assembly
(according to objdump -d) before and after the change, except for
if_cue.c where two adjacent instructions inexplicably change order.
|
| 1.73 |
| 16-Aug-2010 |
tsutsui | Misc cleanup:
- no need to keep TX/RX mbufs during xfers in struct kue_chain
- check RX packet length more strictly in kue_rxeof()
- make some TX/RX handling in kue_send() and kue_rxeof() more readable
with proper functions
Tested on:
kue0: LINKSYS USB Network Adapter, rev 1.00/2.02, addr 5
|
| 1.72 |
| 16-Aug-2010 |
tsutsui | Static -> static
We can still preserve static function symbols for debug.
(they're also likely inlined but we can specify -fno-inline on debug)
|
| 1.71 |
| 16-Aug-2010 |
tsutsui | - u_intNN_t -> uintNN_t
- use uint8_t for binary data
- use bool for boolean vaules
No binary change.
|
| 1.70 |
| 16-Aug-2010 |
tsutsui | Unifdef defined(__NetBSD__) part. No binary change.
|
| 1.69 |
| 05-Apr-2010 |
joerg | Push the bpf_ops usage back into bpf.h. Push the common ifp->if_bpf
check into the inline functions as well the fourth argument for
bpf_attach.
|
| 1.68 |
| 19-Jan-2010 |
pooka | branches: 1.68.2; 1.68.4;
Redefine bpf linkage through an always present op vector, i.e.
#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.
Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.
Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
|
| 1.67 |
| 06-Dec-2009 |
dyoung | Simplify several device-activation hooks.
|
| 1.66 |
| 23-Sep-2009 |
plunky | fix up USB drivers printing of autoconf information
1. expand the USB_ATTACH_SETUP macro (requested by jmcneill)
2. reorder the attach function so that the first thing it does is print
newlines.
3. after this, we can call usbd_devinfo_alloc(), which polls the device
allowing a context switch, and aprint_normal() the device information.
this avoids problems where autoconf messages are getting mixed up.
|
| 1.65 |
| 04-Sep-2009 |
dyoung | Change spaces to tabs and remove some unnecessary parentheses. No
functional change intended.
|
| 1.64 |
| 07-Nov-2008 |
dyoung | *** Summary ***
When a link-layer address changes (e.g., ifconfig ex0 link
02:de:ad:be:ef:02 active), send a gratuitous ARP and/or a Neighbor
Advertisement to update the network-/link-layer address bindings
on our LAN peers.
Refuse a change of ethernet address to the address 00:00:00:00:00:00
or to any multicast/broadcast address. (Thanks matt@.)
Reorder ifnet ioctl operations so that driver ioctls may inherit
the functions of their "class"---ether_ioctl(), fddi_ioctl(), et
cetera---and the class ioctls may inherit from the generic ioctl,
ifioctl_common(), but both driver- and class-ioctls may override
the generic behavior. Make network drivers share more code.
Distinguish a "factory" link-layer address from others for the
purposes of both protecting that address from deletion and computing
EUI64.
Return consistent, appropriate error codes from network drivers.
Improve readability. KNF.
*** Details ***
In if_attach(), always initialize the interface ioctl routine,
ifnet->if_ioctl, if the driver has not already initialized it.
Delete if_ioctl == NULL tests everywhere else, because it cannot
happen.
In the ioctl routines of network interfaces, inherit common ioctl
behaviors by calling either ifioctl_common() or whichever ioctl
routine is appropriate for the class of interface---e.g., ether_ioctl()
for ethernets.
Stop (ab)using SIOCSIFADDR and start to use SIOCINITIFADDR. In
the user->kernel interface, SIOCSIFADDR's argument was an ifreq,
but on the protocol->ifnet interface, SIOCSIFADDR's argument was
an ifaddr. That was confusing, and it would work against me as I
make it possible for a network interface to overload most ioctls.
On the protocol->ifnet interface, replace SIOCSIFADDR with
SIOCINITIFADDR. In ifioctl(), return EPERM if userland tries to
invoke SIOCINITIFADDR.
In ifioctl(), give the interface the first shot at handling most
interface ioctls, and give the protocol the second shot, instead
of the other way around. Finally, let compatibility code (COMPAT_OSOCK)
take a shot.
Pull device initialization out of switch statements under
SIOCINITIFADDR. For example, pull ..._init() out of any switch
statement that looks like this:
switch (...->sa_family) {
case ...:
..._init();
...
break;
...
default:
..._init();
...
break;
}
Rewrite many if-else clauses that handle all permutations of IFF_UP
and IFF_RUNNING to use a switch statement,
switch (x & (IFF_UP|IFF_RUNNING)) {
case 0:
...
break;
case IFF_RUNNING:
...
break;
case IFF_UP:
...
break;
case IFF_UP|IFF_RUNNING:
...
break;
}
unifdef lots of code containing #ifdef FreeBSD, #ifdef NetBSD, and
#ifdef SIOCSIFMTU, especially in fwip(4) and in ndis(4).
In ipw(4), remove an if_set_sadl() call that is out of place.
In nfe(4), reuse the jumbo MTU logic in ether_ioctl().
Let ethernets register a callback for setting h/w state such as
promiscuous mode and the multicast filter in accord with a change
in the if_flags: ether_set_ifflags_cb() registers a callback that
returns ENETRESET if the caller should reset the ethernet by calling
if_init(), 0 on success, != 0 on failure. Pull common code from
ex(4), gem(4), nfe(4), sip(4), tlp(4), vge(4) into ether_ioctl(),
and register if_flags callbacks for those drivers.
Return ENOTTY instead of EINVAL for inappropriate ioctls. In
zyd(4), use ENXIO instead of ENOTTY to indicate that the device is
not any longer attached.
Add to if_set_sadl() a boolean 'factory' argument that indicates
whether a link-layer address was assigned by the factory or some
other source. In a comment, recommend using the factory address
for generating an EUI64, and update in6_get_hw_ifid() to prefer a
factory address to any other link-layer address.
Add a routing message, RTM_LLINFO_UPD, that tells protocols to
update the binding of network-layer addresses to link-layer addresses.
Implement this message in IPv4 and IPv6 by sending a gratuitous
ARP or a neighbor advertisement, respectively. Generate RTM_LLINFO_UPD
messages on a change of an interface's link-layer address.
In ether_ioctl(), do not let SIOCALIFADDR set a link-layer address
that is broadcast/multicast or equal to 00:00:00:00:00:00.
Make ether_ioctl() call ifioctl_common() to handle ioctls that it
does not understand.
In gif(4), initialize if_softc and use it, instead of assuming that
the gif_softc and ifp overlap.
Let ifioctl_common() handle SIOCGIFADDR.
Sprinkle rtcache_invariants(), which checks on DIAGNOSTIC kernels
that certain invariants on a struct route are satisfied.
In agr(4), rewrite agr_ioctl_filter() to be a bit more explicit
about the ioctls that we do not allow on an agr(4) member interface.
bzero -> memset. Delete unnecessary casts to void *. Use
sockaddr_in_init() and sockaddr_in6_init(). Compare pointers with
NULL instead of "testing truth". Replace some instances of (type
*)0 with NULL. Change some K&R prototypes to ANSI C, and join
lines.
|
| 1.63 |
| 24-May-2008 |
cube | branches: 1.63.4; 1.63.6;
Split device_t and softc for all USB device drivers, and related cosmetic
changes.
Matthias Drochner kindly reviewed this patch, and tested ums, ubt, uaudio
and ral. I tested umass myself.
|
| 1.62 |
| 07-Feb-2008 |
dyoung | branches: 1.62.6; 1.62.8; 1.62.10; 1.62.12;
Start patching up the kernel so that a network driver always has
the opportunity to handle an ioctl before generic ifioctl handling
occurs. This will ease extending the kernel and sharing of code
between drivers.
First steps: Make the signature of ifioctl_common() match struct
ifinet->if_ioctl. Convert SIOCSIFCAP and SIOCSIFMTU to the new
ifioctl() regime, throughout the kernel.
|
| 1.61 |
| 20-Dec-2007 |
dyoung | Constify struct ifnet->if_sadl and every use throughout the tree.
Add if_set_sadl() that both sets the link-layer address length and
replaces the current link-layer address with a new one, and use it
throughout the tree.
|
| 1.60 |
| 13-Mar-2007 |
drochner | branches: 1.60.12; 1.60.18; 1.60.20; 1.60.24;
Introduce different autoconf interface attributes for USB drivers
matching (and handling) a whole device and those which match an
interface only. This will allow to enforce some rules, eg that
the former don't use interface information for matching or that the
latter don't modify global device state.
The previous way left too much freedom do the drivers which led to
inconsistencies and abuse.
For now, I've not changed locators and submatch rules, this will
happen later.
There should not be any change in behaviour, except in the case of
some drivers which did behave inconsistently:
if_atu, if_axe, uep: matched the configured device in the interface
stage, but did configuration again. I've converted them to match
in the device stage.
ustir, utoppy: matched in the interface stage, but only against
vendor/device information, and used any configuration/interface
without checking. Changed to match in device stage, and added
some simple code to configure and use the first interface.
If you have one of those devices, please test!
|
| 1.59 |
| 04-Mar-2007 |
christos | branches: 1.59.2; 1.59.4;
Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.
|
| 1.58 |
| 16-Nov-2006 |
christos | branches: 1.58.4; 1.58.10;
__unused removal on arguments; approved by core.
|
| 1.57 |
| 12-Oct-2006 |
christos | - sprinkle __unused on function decls.
- fix a couple of unused bugs
- no more -Wno-unused for i386
|
| 1.56 |
| 07-Sep-2006 |
dogcow | branches: 1.56.2; 1.56.4;
remove more vestiges of CCITT, LLC, HDLC, NS, and NSIP.
|
| 1.55 |
| 28-Nov-2005 |
augustss | branches: 1.55.4; 1.55.8;
Use usbd_clear_endpoint_stall_async() when clearing endpoint stalls in
an interrupt context. From kern/32172 by darkstar@city-net.com.
|
| 1.54 |
| 30-May-2005 |
christos | branches: 1.54.2; 1.54.8;
- const poisoning
- eliminate variable shadowing
|
| 1.53 |
| 11-May-2005 |
augustss | Don't keep the devinfo string on the stack, instead use malloc/free.
This should cure some rare stack overflows.
|
| 1.52 |
| 22-Oct-2004 |
augustss | Add a device. From OpenBSD.
|
| 1.51 |
| 23-Apr-2004 |
itojun | use bounded string ops (snprintf, strl*)
|
| 1.50 |
| 16-Jul-2002 |
augustss | branches: 1.50.6;
Refetch interface handle on reset. Avoids potential access to freed memory.
Fix from FreeBSD.
|
| 1.49 |
| 11-Jul-2002 |
augustss | Get rid of trailing white space.
|
| 1.48 |
| 08-Jul-2002 |
augustss | s/__FUNCTION__/__func__/
|
| 1.47 |
| 17-Mar-2002 |
augustss | branches: 1.47.4;
Whitespace fixes.
|
| 1.46 |
| 12-Dec-2001 |
augustss | Remove some stupid casts.
|
| 1.45 |
| 03-Dec-2001 |
augustss | Handle vendor/product lookup with a common routine.
|
| 1.44 |
| 13-Nov-2001 |
lukem | add RCSIDs
|
| 1.43 |
| 08-Oct-2001 |
augustss | Add some more Ethernet adapters (info gleaned from Linux).
|
| 1.42 |
| 16-Jul-2001 |
augustss | branches: 1.42.2;
Alphabetize.
|
| 1.41 |
| 13-Apr-2001 |
thorpej | branches: 1.41.2;
Remove the use of splimp() from the NetBSD kernel. splnet()
and only splnet() is allowed for the protection of data structures
used by network devices.
|
| 1.40 |
| 08-Apr-2001 |
augustss | Add a Peracom adapter.
|
| 1.39 |
| 30-Jan-2001 |
augustss | branches: 1.39.2;
Add Abocom URE450 Ethernet adapter.
|
| 1.38 |
| 29-Jan-2001 |
enami | Handle allmulti case correctly as a NetBSD network driver;
if we are requested range of multicast address or too many multicast address,
program multicast filter to receive all multicast address. And set/clear
IFF_ALLMULTI flag properly.
|
| 1.37 |
| 21-Jan-2001 |
augustss | Several changes:
* Get rid of `#ifdef FreeBSD'; they seem to maintain their own version.
* Change watchdog code (from FreeBSD).
* Get rid of the horrible USBD_NO_TSLEEP hack.
* Repair some const damage.
|
| 1.36 |
| 21-Jan-2001 |
augustss | Use a better way to test if we are cold starting the device. (From FreeBSD)
|
| 1.35 |
| 18-Jan-2001 |
jdolecek | constify
|
| 1.34 |
| 14-Dec-2000 |
thorpej | ALTQ'ify.
|
| 1.33 |
| 06-Dec-2000 |
jdolecek | add I/O Data USB-ET/T (which uses KL5KUSB101B) to the list
Patch sent in kern/11635 by ORI Manabu
|
| 1.32 |
| 15-Nov-2000 |
thorpej | branches: 1.32.2;
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
|
| 1.31 |
| 24-Oct-2000 |
augustss | Tell usbd_set_config_no() to be verbose. It's nice to know whyit fails.
|
| 1.30 |
| 01-Oct-2000 |
thorpej | Move the check for "promisc + unicast + not for us" into ether_input(),
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
|
| 1.29 |
| 01-Jun-2000 |
augustss | branches: 1.29.2;
Bring the coding style into the 80s, i.e., get rid of __P and use
ANSI prototypes and declarations.
|
| 1.28 |
| 02-Apr-2000 |
augustss | branches: 1.28.2;
Generate an error message if starting a transfer fails.
|
| 1.27 |
| 30-Mar-2000 |
augustss | Afew more OpenBSD portability fixes.
|
| 1.26 |
| 29-Mar-2000 |
augustss | Some OpenBSD portability fixes.
|
| 1.25 |
| 27-Mar-2000 |
augustss | Use default timeout for transfers.
|
| 1.24 |
| 27-Mar-2000 |
augustss | Change (almost) all static to Static. The symbol `Static' can then be defined
to `' or `static' depending on if you want to debug or not.
|
| 1.23 |
| 26-Mar-2000 |
augustss | Regen & adjust name.
|
| 1.22 |
| 25-Mar-2000 |
augustss | Change the test for cold boot slightly to avoid a long busy wait with UHCI.
|
| 1.21 |
| 24-Mar-2000 |
augustss | Some cleanup and renaming of the callouts used in USB drivers.
|
| 1.20 |
| 23-Mar-2000 |
thorpej | New callout mechanism with two major improvements over the old
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
|
| 1.19 |
| 20-Mar-2000 |
augustss | Some new devices. From FreeBSD.
|
| 1.18 |
| 20-Mar-2000 |
augustss | Clean up code a little.
|
| 1.17 |
| 20-Mar-2000 |
augustss | Switch method for determing if we are cold booting. The driver now works
with OHCI adapters.
|
| 1.16 |
| 15-Mar-2000 |
augustss | Fix some uninitialized variables. From Krister Walfridsson <cato@df.lth.se>
|
| 1.15 |
| 12-Mar-2000 |
augustss | Avoid accessing the device if it is dying.
|
| 1.14 |
| 08-Mar-2000 |
augustss | Add a debug message.
|
| 1.13 |
| 06-Mar-2000 |
thorpej | No longer necessary to futz with ifp->if_baudrate here.
|
| 1.12 |
| 06-Mar-2000 |
augustss | Use macros from usb.h instead masking out bit explicitely.
|
| 1.11 |
| 02-Mar-2000 |
augustss | Use ratecheck() to limit error messages on disconnect.
Break out some common functionality.
|
| 1.10 |
| 01-Mar-2000 |
augustss | Protect the use of bpf_mtap so bpf isn't needed.
aue: Limit the number of error messages at disconnect by using ratecheck().
|
| 1.9 |
| 29-Feb-2000 |
hubertf | This driver also handles the 3COM 3COM HomeConnect Ethernet USB Adapter
(3C460), rev 1.00/2.05
|
| 1.8 |
| 17-Feb-2000 |
augustss | Handle detach that happens before attach has finished. (Reported by mycroft.)
|
| 1.7 |
| 17-Feb-2000 |
mycroft | Use bpf_mtap() correctly.
|
| 1.6 |
| 02-Feb-2000 |
augustss | Generate usb events on attach and detach.
Clean up detach a little.
|
| 1.5 |
| 01-Feb-2000 |
thorpej | Add support for detaching the interface.
|
| 1.4 |
| 24-Jan-2000 |
augustss | Recognize Linksys USB10T.
|
| 1.3 |
| 18-Jan-2000 |
augustss | Pretend we can detach. Then we can at least the detach the device
if the attach fails in the middle.
|
| 1.2 |
| 17-Jan-2000 |
augustss | Remove some unnecessary cleanup.
|
| 1.1 |
| 17-Jan-2000 |
augustss | Add Bill Paul's FreeBSD driver for the Kawasaki LSI KL5KUSB101B USB Ethernet
chip.
|
| 1.28.2.1 |
| 22-Jun-2000 |
minoura | Sync w/ netbsd-1-5-base.
|
| 1.29.2.2 |
| 06-Feb-2002 |
he | Pull up revision 1.43 (via patch, requested by bouyer):
Add more devices using the Kawasaki USB-ethernet chip. Fixes
PR#15344.
|
| 1.29.2.1 |
| 13-Mar-2001 |
he | Pull up revision 1.38 (via patch, requested by tsutsui):
Handle allmulti case correctly as a NetBSD network driver;
if we are requested range of multicast address or too many
multicast address, program multicast filter to receive all
multicast address. And set/clear IFF_ALLMULTI flag properly.
|
| 1.32.2.7 |
| 21-Apr-2001 |
bouyer | Sync with HEAD
|
| 1.32.2.6 |
| 11-Feb-2001 |
bouyer | Sync with HEAD.
|
| 1.32.2.5 |
| 05-Jan-2001 |
bouyer | Sync with HEAD
|
| 1.32.2.4 |
| 08-Dec-2000 |
bouyer | Sync with HEAD.
|
| 1.32.2.3 |
| 22-Nov-2000 |
bouyer | Sync with HEAD.
|
| 1.32.2.2 |
| 20-Nov-2000 |
bouyer | Update thorpej_scsipi to -current as of a month ago
A i386 GENERIC kernel compiles without the siop, ahc and bha drivers
(will be updated later). i386 IDE/ATAPI and ncr work, as well as
sparc/esp_sbus. alpha should work as well (untested yet).
siop, ahc and bha will be updated once I've updated the branch to current
-current, as well as machine-dependant code.
|
| 1.32.2.1 |
| 15-Nov-2000 |
bouyer | file if_kue.c was added on branch thorpej_scsipi on 2000-11-20 11:43:20 +0000
|
| 1.39.2.10 |
| 01-Aug-2002 |
nathanw | Catch up to -current.
|
| 1.39.2.9 |
| 10-Jul-2002 |
nathanw | Don't need curlwp here.
|
| 1.39.2.8 |
| 24-Jun-2002 |
nathanw | Curproc->curlwp renaming.
Change uses of "curproc->l_proc" back to "curproc", which is more like the
original use. Bare uses of "curproc" are now "curlwp".
"curproc" is now #defined in proc.h as ((curlwp) ? (curlwp)->l_proc) : NULL)
so that it is always safe to reference curproc (*de*referencing curproc
is another story, but that's always been true).
|
| 1.39.2.7 |
| 01-Apr-2002 |
nathanw | Catch up to -current.
(CVS: It's not just a program. It's an adventure!)
|
| 1.39.2.6 |
| 08-Jan-2002 |
nathanw | Catch up to -current.
|
| 1.39.2.5 |
| 14-Nov-2001 |
nathanw | Catch up to -current.
|
| 1.39.2.4 |
| 22-Oct-2001 |
nathanw | Catch up to -current.
|
| 1.39.2.3 |
| 24-Aug-2001 |
nathanw | Catch up with -current.
|
| 1.39.2.2 |
| 21-Jun-2001 |
nathanw | Catch up to -current.
|
| 1.39.2.1 |
| 09-Apr-2001 |
nathanw | Catch up with -current.
|
| 1.41.2.4 |
| 06-Sep-2002 |
jdolecek | sync kqueue branch with HEAD
|
| 1.41.2.3 |
| 23-Jun-2002 |
jdolecek | catch up with -current on kqueue branch
|
| 1.41.2.2 |
| 10-Jan-2002 |
thorpej | Sync kqueue branch with -current.
|
| 1.41.2.1 |
| 03-Aug-2001 |
lukem | update to -current
|
| 1.42.2.1 |
| 11-Oct-2001 |
fvdl | Catch up with -current. Fix some bogons in the sparc64 kbd/ms
attach code. cd18xx conversion provided by mrg.
|
| 1.47.4.2 |
| 20-Jul-2002 |
gehenna | catch up with -current.
|
| 1.47.4.1 |
| 15-Jul-2002 |
gehenna | catch up with -current.
|
| 1.50.6.6 |
| 11-Dec-2005 |
christos | Sync with head.
|
| 1.50.6.5 |
| 10-Nov-2005 |
skrll | Sync with HEAD. Here we go again...
|
| 1.50.6.4 |
| 02-Nov-2004 |
skrll | Sync with HEAD.
|
| 1.50.6.3 |
| 21-Sep-2004 |
skrll | Fix the sync with head I botched.
|
| 1.50.6.2 |
| 18-Sep-2004 |
skrll | Sync with HEAD.
|
| 1.50.6.1 |
| 03-Aug-2004 |
skrll | Sync with HEAD
|
| 1.54.8.1 |
| 29-Nov-2005 |
yamt | sync with head.
|
| 1.54.2.5 |
| 11-Feb-2008 |
yamt | sync with head.
|
| 1.54.2.4 |
| 21-Jan-2008 |
yamt | sync with head
|
| 1.54.2.3 |
| 03-Sep-2007 |
yamt | sync with head.
|
| 1.54.2.2 |
| 30-Dec-2006 |
yamt | sync with head.
|
| 1.54.2.1 |
| 21-Jun-2006 |
yamt | sync with head.
|
| 1.55.8.1 |
| 14-Sep-2006 |
yamt | sync with head.
|
| 1.55.4.1 |
| 09-Sep-2006 |
rpaulo | sync with head
|
| 1.56.4.2 |
| 10-Dec-2006 |
yamt | sync with head.
|
| 1.56.4.1 |
| 22-Oct-2006 |
yamt | sync with head
|
| 1.56.2.1 |
| 18-Nov-2006 |
ad | Sync with head.
|
| 1.58.10.6 |
| 25-Jun-2007 |
itohy | New devices from FreeBSD/OpenBSD:
- Silicom Psion Gold Port Ethernet
|
| 1.58.10.5 |
| 22-Jun-2007 |
itohy | Execute callback functions as tasks on FreeBSD.
(FYI, the code does work on NetBSD, but affects the performance, you know.)
|
| 1.58.10.4 |
| 18-Jun-2007 |
itohy | Pullup 1.60 (attach driver per interface) with #ifdef USB_USE_IFATTACH.
|
| 1.58.10.3 |
| 17-Jun-2007 |
itohy | Pullup 1.59 in a different way.
|
| 1.58.10.2 |
| 13-Jun-2007 |
itohy | - Convert to use usbd_map_buffer_mbuf() and eliminate mbuf-memory copy.
- Use common code in usb_ethersubr.[ch] and reduce duplicated code.
- Use ether_ioctl() to handle llinfo (what is it?) properly.
- XXX Use m_copyback() to extend mbuf chain. XXX Is this the right way?
XXX Untested, missing hardware.
|
| 1.58.10.1 |
| 22-May-2007 |
itohy | Overhaul of USB stack, mostly DMA related
This applies to NetBSD 4.99.13 (March 1, 2007)
usbdi(9) interface is based on FreeBSD version, excluding
- removal of portability code
Patch most NetBSD changes, excluding
- DMA memory "reserve", since we don't need contiguous buffers any longer
- volatiles in DMA structure, since it should not be needed
with proper bus_dmamap_sync(9)s
DMA/non-DMA memory management overhaul
- Move all DMA related code to usb_mem.[ch]
(add usb_alloc_buffer_dma(), usb_free_buffer_dma(), etc.).
XXX Should usb_mem.[ch] be renamed as usb_mem_dma.[ch] ?
- Add corresponding non-DMA code to usb_mem_nodma.[ch] .
Currently just use malloc(9).
- Above files are conditionally used by config framework (added
attributes to conf/files and dev/usb/files.usb).
- Add diagnostic panics when resource allocation is requested
on interrupt context.
- Change memory allocations (that require context) from NOWAIT to WAITOK.
Allocate DMA/non-DMA buffer per host interface, not globally.
advantage: Buffers can be freed on detaching host interface.
Activity of a host interface does not affect others.
disadvantages: It possibly consumes more memory.
API changes
- usbd_alloc_xfer() is changed:
old: usbd_xfer_handle usbd_alloc_xfer(usbd_device_handle dev);
new: usbd_xfer_handle usbd_alloc_xfer(usbd_device_handle dev,
usbd_pipe_handle pipe);
- pipe argument of usbd_setup_*xfer() are now unused
XXX the pipe argument should be removed?
- add mapping APIs
- async request will be processed as a task (kernel thread context),
and delayed to some extent
- usbdivar.h: struct usbd_xfer: renamed a member "allocbuf" to "hcbuffer"
(mapped/allocated/refered buffer for HCI driver)
- usb_port.h: change usb_proc_ptr from struct ptoc * to struct lwp *
- usb_port.h: add usb_sigproc_ptr for psignal(9) (struct proc *)
- usb.h: add UE_MAXPKTSZ(ep) and UE_MAXPKTSZ_MASK macros for USB 2.0
changes to USB device drivers
- atu, aue, axe, cdce, cue, kue, rum, udav, upl, ural, url,
uaudio, ubt, ucom, ugen, uhidev, uirda, ulpt, umidi, urio,
uscanner, ustir, utoppy:
* catch up API change of usbd_alloc_xfer()
- umass, usscanner:
* catch up API change of usbd_alloc_xfer()
* eliminate memory copy for large transfer
ohci
- free resources on detach
- add lots of bus_dmamap_sync() operations
- simplify the code of loading std chain
- rewrite code of looking up TD/ITD from DMA addr by using allocation chunk
- add workaround for CMD Tech 670 and 673 chipsets
- make sure resources are not allocated in interrupt context
- add support for mapping buffer and mbuf
slhci
- allocate xfer and slhci_xfer at once, and simplify relevant code
- add slhci_detach()
- remove second arg of slhci_attach() since it is the same as the first arg.
- add support for "mapping" (no, it doesn't map since it doesn't do DMA)
buffer and mbuf
- add pcmcia frontend
- NOT TESTED, missing hardware
ehci
- add lots of bus_dmamap_sync() operations, possibly too many
- make sure resources are not allocated in interrupt context
- add support for mapping buffer and mbuf
- done only simple test
uhci
- add lots of bus_dmamap_sync() operations, possibly too many
- make sure resources are not allocated in interrupt context
- add support for mapping buffer and mbuf
To do
- review, test, debug
- rewrite network drivers to utilize usbd_map_buffer_mbuf()
- rewrite uaudio(4) to eliminate memcpy
- "pipe" argument of usbd_setup_*xfer() should eventually be removed
|
| 1.58.4.2 |
| 24-Mar-2007 |
yamt | sync with head.
|
| 1.58.4.1 |
| 12-Mar-2007 |
rmind | Sync with HEAD.
|
| 1.59.4.1 |
| 11-Jul-2007 |
mjf | Sync with head.
|
| 1.59.2.1 |
| 13-Mar-2007 |
ad | Sync with head.
|
| 1.60.24.1 |
| 02-Jan-2008 |
bouyer | Sync with HEAD
|
| 1.60.20.1 |
| 26-Dec-2007 |
ad | Sync with head.
|
| 1.60.18.1 |
| 18-Feb-2008 |
mjf | Sync with HEAD.
|
| 1.60.12.2 |
| 23-Mar-2008 |
matt | sync with HEAD
|
| 1.60.12.1 |
| 09-Jan-2008 |
matt | sync with HEAD
|
| 1.62.12.1 |
| 23-Jun-2008 |
wrstuden | Sync w/ -current. 34 merge conflicts to follow.
|
| 1.62.10.5 |
| 09-Oct-2010 |
yamt | sync with head
|
| 1.62.10.4 |
| 11-Aug-2010 |
yamt | sync with head.
|
| 1.62.10.3 |
| 11-Mar-2010 |
yamt | sync with head
|
| 1.62.10.2 |
| 16-Sep-2009 |
yamt | sync with head
|
| 1.62.10.1 |
| 04-May-2009 |
yamt | sync with head.
|
| 1.62.8.1 |
| 04-Jun-2008 |
yamt | sync with head
|
| 1.62.6.2 |
| 17-Jan-2009 |
mjf | Sync with HEAD.
|
| 1.62.6.1 |
| 02-Jun-2008 |
mjf | Sync with HEAD.
|
| 1.63.6.1 |
| 19-Jan-2009 |
skrll | Sync with HEAD.
|
| 1.63.4.1 |
| 13-Dec-2008 |
haad | Update haad-dm branch to haad-dm-base2.
|
| 1.68.4.2 |
| 05-Mar-2011 |
rmind | sync with head
|
| 1.68.4.1 |
| 30-May-2010 |
rmind | sync with head
|
| 1.68.2.3 |
| 06-Nov-2010 |
uebayasi | Sync with HEAD.
|
| 1.68.2.2 |
| 17-Aug-2010 |
uebayasi | Sync with HEAD.
|
| 1.68.2.1 |
| 30-Apr-2010 |
uebayasi | Sync with HEAD.
|
| 1.74.12.4 |
| 11-Mar-2012 |
mrg | sync to latest -current
|
| 1.74.12.3 |
| 26-Feb-2012 |
mrg | include usbdivar.h in several places that should.
|
| 1.74.12.2 |
| 25-Feb-2012 |
mrg | remove curproc references
|
| 1.74.12.1 |
| 18-Feb-2012 |
mrg | merge to -current.
|
| 1.74.8.3 |
| 22-May-2014 |
yamt | sync with head.
for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.
this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")
|
| 1.74.8.2 |
| 23-Jan-2013 |
yamt | sync with head
|
| 1.74.8.1 |
| 17-Apr-2012 |
yamt | sync with head
|
| 1.77.2.3 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.77.2.2 |
| 20-Aug-2014 |
tls | Rebase to HEAD as of a few days ago.
|
| 1.77.2.1 |
| 25-Feb-2013 |
tls | resync with head
|
| 1.79.2.1 |
| 18-May-2014 |
rmind | sync with head
|
| 1.80.2.1 |
| 07-Apr-2014 |
tls | Be a little more clear and consistent about harvesting entropy from devices:
1) deprecate RND_FLAG_NO_ESTIMATE
2) define RND_FLAG_COLLECT_TIME, RND_FLAG_COLLECT_VALUE
3) define RND_FLAG_ESTIMATE_TIME, RND_FLAG_ESTIMATE_VALUE
4) define RND_FLAG_DEFAULT: RND_FLAG_COLLECT_TIME|
RND_FLAG_COLLECT_VALUE|RND_FLAG_ESTIMATE_TIME
5) Make entropy harvesting from environmental sensors a little more generic
and remove it from individual sensor drivers.
6) Remove individual open-coded delta-estimators for values from a few
places in the tree (uvm, environmental drivers).
7) 0 -> RND_FLAG_DEFAULT, actually gather entropy from various drivers
that had stubbed out code, other minor cleanups.
|
| 1.81.8.2 |
| 26-Jan-2017 |
skrll | Sync with HEAD/nhusb
|
| 1.81.8.1 |
| 06-Sep-2016 |
skrll | First pass at netbsd-7 updated with USB code from HEAD
|
| 1.81.4.15 |
| 05-Sep-2017 |
skrll | WIP MPification
|
| 1.81.4.14 |
| 28-Aug-2017 |
skrll | Sync with HEAD
|
| 1.81.4.13 |
| 05-Feb-2017 |
skrll | Sync with HEAD
|
| 1.81.4.12 |
| 03-Feb-2017 |
skrll | Sync with HEAD
|
| 1.81.4.11 |
| 05-Dec-2016 |
skrll | Sync with HEAD
|
| 1.81.4.10 |
| 09-Jul-2016 |
skrll | Sync with HEAD
|
| 1.81.4.9 |
| 19-Mar-2016 |
skrll | Sync with HEAD
|
| 1.81.4.8 |
| 28-Dec-2015 |
skrll | Strictly follow the sequence abort pipe, destroy xfers, and close pipe as
API now requires. Plug some memory leaks in some drivers while doing
this.
Also, remove up_refcnt as it was broken and helped leak more memory.
|
| 1.81.4.7 |
| 06-Oct-2015 |
skrll | Move from usbd_{alloc,free}_xfer and usbd_{alloc,free}_buffer to
usbd_{create,destroy}_xfer. The API change will allow future changes
to HCDs to simplify the transfer resource allocation and activation.
Several devices tested including ucom, umass, smsc, uvideo, and uaudio.
|
| 1.81.4.6 |
| 06-Jun-2015 |
skrll | Sync with HEAD
|
| 1.81.4.5 |
| 21-Mar-2015 |
skrll | Add prefixes to attach_arg structure member names. No functional change.
|
| 1.81.4.4 |
| 19-Mar-2015 |
skrll | Do the same as OpenBSD and get rid of the *_handle typedefs and use
plain structures insteads
|
| 1.81.4.3 |
| 23-Dec-2014 |
skrll | KNF. No brackets around return value.
|
| 1.81.4.2 |
| 03-Dec-2014 |
skrll | Replace malloc(9) with kmem(9)
|
| 1.81.4.1 |
| 02-Dec-2014 |
skrll | Step #1 of memory allocation re-organisation.
Centralised the buffer allocation routine which now supports DMA
and non-DMA capable host controllers. Remove the
ubm_{alloc,free}m methods from usbd_bus_methods.
The buffer allocation is only allowed in thread context and,
therefore, negates the usefulness of the reserve dma code which
is removed in this change.
USBD_NO_COPY is also no longer required as usbd_transfer and
usbd_transfer_complete now track buffer usage and handle any
copying.
|
| 1.81.2.2 |
| 19-Feb-2018 |
snj | Pull up following revision(s) (requested by skrll in ticket #1556):
sys/dev/usb/if_athn_usb.c: 1.25
sys/dev/usb/if_atu.c: 1.56
sys/dev/usb/if_aue.c: 1.142
sys/dev/usb/if_axe.c: 1.84
sys/dev/usb/if_axen.c: 1.12
sys/dev/usb/if_cdce.c: 1.45
sys/dev/usb/if_cue.c: 1.77
sys/dev/usb/if_kue.c: 1.91
sys/dev/usb/if_otus.c: 1.32
sys/dev/usb/if_rum.c: 1.59
sys/dev/usb/if_run.c: 1.25
sys/dev/usb/if_smsc.c: 1.33
sys/dev/usb/if_udav.c: 1.52
sys/dev/usb/if_upgt.c: 1.18
sys/dev/usb/if_upl.c: 1.61
sys/dev/usb/if_ural.c: 1.53
sys/dev/usb/if_url.c: 1.57
sys/dev/usb/if_urndis.c: 1.17
sys/dev/usb/if_urtw.c: 1.14
sys/dev/usb/if_urtwn.c: 1.56
sys/dev/usb/if_zyd.c: 1.45
sys/dev/usb/irmce.c: 1.4
sys/dev/usb/pseye.c: 1.24
sys/dev/usb/ubt.c: 1.60
sys/dev/usb/ucom.c: 1.120
sys/dev/usb/udsir.c: 1.6
sys/dev/usb/ugen.c: 1.137
sys/dev/usb/uhso.c: 1.27
sys/dev/usb/uirda.c: 1.43
sys/dev/usb/ulpt.c: 1.99
sys/dev/usb/umass.c: 1.163
sys/dev/usb/umidi.c: 1.74
sys/dev/usb/uscanner.c: 1.82
sys/dev/usb/usscanner.c: 1.43
sys/dev/usb/ustir.c: 1.39
sys/dev/usb/utoppy.c: 1.30
sys/dev/usb/uvideo.c: 1.46
PR kern/52931 Kernel panics with Atheros usb wireless interface
Audit the flags to usbd_create_xfer so that USBD_FORCE_SHORT_XFER is
supplied wherever such a transfer is setup. We can drop
USBD_SHORT_XFER_OK as it has not bearing on number of TDs
|
| 1.81.2.1 |
| 05-Apr-2017 |
snj | Pull up following revision(s) (requested by skrll in ticket #1395):
share/man/man4/axe.4: netbsd-7-nhusb
share/man/man4/axen.4: netbsd-7-nhusb
share/man/man4/cdce.4: netbsd-7-nhusb
share/man/man4/uaudio.4: netbsd-7-nhusb
share/man/man4/ucom.4: netbsd-7-nhusb
share/man/man4/uep.4: netbsd-7-nhusb
share/man/man4/urtw.4: netbsd-7-nhusb
share/man/man4/usb.4: netbsd-7-nhusb
share/man/man4/uyap.4: netbsd-7-nhusb
share/man/man4/xhci.4: netbsd-7-nhusb
share/man/man9/usbdi.9: netbsd-7-nhusb
sys/arch/amd64/conf/ALL: netbsd-7-nhusb
sys/arch/amd64/conf/GENERIC: netbsd-7-nhusb
sys/arch/amiga/dev/slhci_zbus.c: netbsd-7-nhusb
sys/arch/arm/allwinner/awin_otg.c: netbsd-7-nhusb
sys/arch/arm/allwinner/awin_usb.c: netbsd-7-nhusb
sys/arch/arm/amlogic/amlogic_dwctwo.c: netbsd-7-nhusb
sys/arch/arm/at91/at91ohci.c: netbsd-7-nhusb
sys/arch/arm/broadcom/bcm2835_dwctwo.c: netbsd-7-nhusb
sys/arch/arm/broadcom/bcm53xx_usb.c: netbsd-7-nhusb
sys/arch/arm/ep93xx/epohci.c: netbsd-7-nhusb
sys/arch/arm/gemini/obio_ehci.c: netbsd-7-nhusb
sys/arch/arm/imx/files.imx23: netbsd-7-nhusb
sys/arch/arm/imx/imxusb.c: netbsd-7-nhusb
sys/arch/arm/imx/imxusbreg.h: netbsd-7-nhusb
sys/arch/arm/omap/obio_ohci.c: netbsd-7-nhusb
sys/arch/arm/omap/omap3_ehci.c: netbsd-7-nhusb
sys/arch/arm/omap/omapl1x_ohci.c: netbsd-7-nhusb
sys/arch/arm/omap/tiotg.c: netbsd-7-nhusb
sys/arch/arm/s3c2xx0/ohci_s3c24x0.c: netbsd-7-nhusb
sys/arch/arm/samsung/exynos_usb.c: netbsd-7-nhusb
sys/arch/arm/xscale/pxa2x0_ohci.c: netbsd-7-nhusb
sys/arch/arm/zynq/zynq_usb.c: netbsd-7-nhusb
sys/arch/hpcarm/dev/nbp_slhci.c: netbsd-7-nhusb
sys/arch/hpcmips/dev/plumohci.c: netbsd-7-nhusb
sys/arch/i386/conf/ALL: netbsd-7-nhusb
sys/arch/i386/conf/GENERIC: netbsd-7-nhusb
sys/arch/i386/pci/gcscehci.c: netbsd-7-nhusb
sys/arch/luna68k/conf/GENERIC: netbsd-7-nhusb
sys/arch/mips/adm5120/dev/ahci.c: netbsd-7-nhusb
sys/arch/mips/adm5120/dev/ahcivar.h: netbsd-7-nhusb
sys/arch/mips/alchemy/dev/ohci_aubus.c: netbsd-7-nhusb
sys/arch/mips/atheros/dev/ehci_arbus.c: netbsd-7-nhusb
sys/arch/mips/atheros/dev/ohci_arbus.c: netbsd-7-nhusb
sys/arch/mips/conf/files.adm5120: netbsd-7-nhusb
sys/arch/mips/ralink/ralink_ehci.c: netbsd-7-nhusb
sys/arch/mips/ralink/ralink_ohci.c: netbsd-7-nhusb
sys/arch/mips/rmi/rmixl_ehci.c: netbsd-7-nhusb
sys/arch/mips/rmi/rmixl_ohci.c: netbsd-7-nhusb
sys/arch/playstation2/dev/ohci_sbus.c: netbsd-7-nhusb
sys/arch/powerpc/booke/dev/pq3ehci.c: netbsd-7-nhusb
sys/arch/powerpc/ibm4xx/dev/dwctwo_plb.c: netbsd-7-nhusb
sys/arch/x68k/dev/slhci_intio.c: netbsd-7-nhusb
sys/conf/files: netbsd-7-nhusb
sys/dev/cardbus/ehci_cardbus.c: netbsd-7-nhusb
sys/dev/cardbus/ohci_cardbus.c: netbsd-7-nhusb
sys/dev/cardbus/uhci_cardbus.c: netbsd-7-nhusb
sys/dev/ic/sl811hs.c: netbsd-7-nhusb
sys/dev/ic/sl811hsvar.h: netbsd-7-nhusb
sys/dev/isa/slhci_isa.c: netbsd-7-nhusb
sys/dev/marvell/ehci_mv.c: netbsd-7-nhusb
sys/dev/pci/ehci_pci.c: netbsd-7-nhusb
sys/dev/pci/ohci_pci.c: netbsd-7-nhusb
sys/dev/pci/uhci_pci.c: netbsd-7-nhusb
sys/dev/pci/xhci_pci.c: netbsd-7-nhusb
sys/dev/pcmcia/slhci_pcmcia.c: netbsd-7-nhusb
sys/dev/usb/Makefile.usbdevs: netbsd-7-nhusb
sys/dev/usb/TODO: netbsd-7-nhusb
sys/dev/usb/TODO.usbmp: netbsd-7-nhusb
sys/dev/usb/aubtfwl.c: netbsd-7-nhusb
sys/dev/usb/auvitek.c: netbsd-7-nhusb
sys/dev/usb/auvitek_audio.c: netbsd-7-nhusb
sys/dev/usb/auvitek_dtv.c: netbsd-7-nhusb
sys/dev/usb/auvitek_i2c.c: netbsd-7-nhusb
sys/dev/usb/auvitek_video.c: netbsd-7-nhusb
sys/dev/usb/auvitekvar.h: netbsd-7-nhusb
sys/dev/usb/ehci.c: netbsd-7-nhusb
sys/dev/usb/ehcireg.h: netbsd-7-nhusb
sys/dev/usb/ehcivar.h: netbsd-7-nhusb
sys/dev/usb/emdtv.c: netbsd-7-nhusb
sys/dev/usb/emdtv_dtv.c: netbsd-7-nhusb
sys/dev/usb/emdtv_ir.c: netbsd-7-nhusb
sys/dev/usb/emdtvvar.h: netbsd-7-nhusb
sys/dev/usb/ezload.c: netbsd-7-nhusb
sys/dev/usb/ezload.h: netbsd-7-nhusb
sys/dev/usb/files.usb: netbsd-7-nhusb
sys/dev/usb/hid.c: netbsd-7-nhusb
sys/dev/usb/hid.h: netbsd-7-nhusb
sys/dev/usb/if_athn_usb.c: netbsd-7-nhusb
sys/dev/usb/if_athn_usb.h: netbsd-7-nhusb
sys/dev/usb/if_atu.c: netbsd-7-nhusb
sys/dev/usb/if_atureg.h: netbsd-7-nhusb
sys/dev/usb/if_aue.c: netbsd-7-nhusb
sys/dev/usb/if_auereg.h: netbsd-7-nhusb
sys/dev/usb/if_axe.c: netbsd-7-nhusb
sys/dev/usb/if_axen.c: netbsd-7-nhusb
sys/dev/usb/if_axenreg.h: netbsd-7-nhusb
sys/dev/usb/if_axereg.h: netbsd-7-nhusb
sys/dev/usb/if_cdce.c: netbsd-7-nhusb
sys/dev/usb/if_cdcereg.h: netbsd-7-nhusb
sys/dev/usb/if_cue.c: netbsd-7-nhusb
sys/dev/usb/if_cuereg.h: netbsd-7-nhusb
sys/dev/usb/if_kue.c: netbsd-7-nhusb
sys/dev/usb/if_kuereg.h: netbsd-7-nhusb
sys/dev/usb/if_otus.c: netbsd-7-nhusb
sys/dev/usb/if_otusvar.h: netbsd-7-nhusb
sys/dev/usb/if_rum.c: netbsd-7-nhusb
sys/dev/usb/if_rumreg.h: netbsd-7-nhusb
sys/dev/usb/if_rumvar.h: netbsd-7-nhusb
sys/dev/usb/if_run.c: netbsd-7-nhusb
sys/dev/usb/if_runvar.h: netbsd-7-nhusb
sys/dev/usb/if_smsc.c: netbsd-7-nhusb
sys/dev/usb/if_smscreg.h: netbsd-7-nhusb
sys/dev/usb/if_smscvar.h: netbsd-7-nhusb
sys/dev/usb/if_udav.c: netbsd-7-nhusb
sys/dev/usb/if_udavreg.h: netbsd-7-nhusb
sys/dev/usb/if_upgt.c: netbsd-7-nhusb
sys/dev/usb/if_upgtvar.h: netbsd-7-nhusb
sys/dev/usb/if_upl.c: netbsd-7-nhusb
sys/dev/usb/if_ural.c: netbsd-7-nhusb
sys/dev/usb/if_uralreg.h: netbsd-7-nhusb
sys/dev/usb/if_uralvar.h: netbsd-7-nhusb
sys/dev/usb/if_url.c: netbsd-7-nhusb
sys/dev/usb/if_urlreg.h: netbsd-7-nhusb
sys/dev/usb/if_urndis.c: netbsd-7-nhusb
sys/dev/usb/if_urndisreg.h: netbsd-7-nhusb
sys/dev/usb/if_urtw.c: netbsd-7-nhusb
sys/dev/usb/if_urtwn.c: netbsd-7-nhusb
sys/dev/usb/if_urtwn_data.h: netbsd-7-nhusb
sys/dev/usb/if_urtwnreg.h: netbsd-7-nhusb
sys/dev/usb/if_urtwnvar.h: netbsd-7-nhusb
sys/dev/usb/if_urtwreg.h: netbsd-7-nhusb
sys/dev/usb/if_zyd.c: netbsd-7-nhusb
sys/dev/usb/if_zydreg.h: netbsd-7-nhusb
sys/dev/usb/irmce.c: netbsd-7-nhusb
sys/dev/usb/moscom.c: netbsd-7-nhusb
sys/dev/usb/motg.c: netbsd-7-nhusb
sys/dev/usb/motgvar.h: netbsd-7-nhusb
sys/dev/usb/ohci.c: netbsd-7-nhusb
sys/dev/usb/ohcireg.h: netbsd-7-nhusb
sys/dev/usb/ohcivar.h: netbsd-7-nhusb
sys/dev/usb/pseye.c: netbsd-7-nhusb
sys/dev/usb/slurm.c: netbsd-7-nhusb
sys/dev/usb/stuirda.c: netbsd-7-nhusb
sys/dev/usb/u3g.c: netbsd-7-nhusb
sys/dev/usb/uark.c: netbsd-7-nhusb
sys/dev/usb/uatp.c: netbsd-7-nhusb
sys/dev/usb/uaudio.c: netbsd-7-nhusb
sys/dev/usb/uberry.c: netbsd-7-nhusb
sys/dev/usb/ubsa.c: netbsd-7-nhusb
sys/dev/usb/ubsa_common.c: netbsd-7-nhusb
sys/dev/usb/ubsavar.h: netbsd-7-nhusb
sys/dev/usb/ubt.c: netbsd-7-nhusb
sys/dev/usb/uchcom.c: netbsd-7-nhusb
sys/dev/usb/ucom.c: netbsd-7-nhusb
sys/dev/usb/ucomvar.h: netbsd-7-nhusb
sys/dev/usb/ucycom.c: netbsd-7-nhusb
sys/dev/usb/udl.c: netbsd-7-nhusb
sys/dev/usb/udl.h: netbsd-7-nhusb
sys/dev/usb/udsbr.c: netbsd-7-nhusb
sys/dev/usb/udsir.c: netbsd-7-nhusb
sys/dev/usb/uep.c: netbsd-7-nhusb
sys/dev/usb/uftdi.c: netbsd-7-nhusb
sys/dev/usb/uftdireg.h: netbsd-7-nhusb
sys/dev/usb/ugen.c: netbsd-7-nhusb
sys/dev/usb/ugensa.c: netbsd-7-nhusb
sys/dev/usb/uhci.c: netbsd-7-nhusb
sys/dev/usb/uhcireg.h: netbsd-7-nhusb
sys/dev/usb/uhcivar.h: netbsd-7-nhusb
sys/dev/usb/uhid.c: netbsd-7-nhusb
sys/dev/usb/uhidev.c: netbsd-7-nhusb
sys/dev/usb/uhidev.h: netbsd-7-nhusb
sys/dev/usb/uhmodem.c: netbsd-7-nhusb
sys/dev/usb/uhso.c: netbsd-7-nhusb
sys/dev/usb/uhub.c: netbsd-7-nhusb
sys/dev/usb/uipad.c: netbsd-7-nhusb
sys/dev/usb/uipaq.c: netbsd-7-nhusb
sys/dev/usb/uirda.c: netbsd-7-nhusb
sys/dev/usb/uirdavar.h: netbsd-7-nhusb
sys/dev/usb/ukbd.c: netbsd-7-nhusb
sys/dev/usb/ukbdmap.c: netbsd-7-nhusb
sys/dev/usb/ukyopon.c: netbsd-7-nhusb
sys/dev/usb/ukyopon.h: netbsd-7-nhusb
sys/dev/usb/ulpt.c: netbsd-7-nhusb
sys/dev/usb/umass.c: netbsd-7-nhusb
sys/dev/usb/umass_isdata.c: netbsd-7-nhusb
sys/dev/usb/umass_isdata.h: netbsd-7-nhusb
sys/dev/usb/umass_quirks.c: netbsd-7-nhusb
sys/dev/usb/umass_quirks.h: netbsd-7-nhusb
sys/dev/usb/umass_scsipi.c: netbsd-7-nhusb
sys/dev/usb/umass_scsipi.h: netbsd-7-nhusb
sys/dev/usb/umassvar.h: netbsd-7-nhusb
sys/dev/usb/umcs.c: netbsd-7-nhusb
sys/dev/usb/umct.c: netbsd-7-nhusb
sys/dev/usb/umidi.c: netbsd-7-nhusb
sys/dev/usb/umidi_quirks.c: netbsd-7-nhusb
sys/dev/usb/umidi_quirks.h: netbsd-7-nhusb
sys/dev/usb/umodem.c: netbsd-7-nhusb
sys/dev/usb/umodem_common.c: netbsd-7-nhusb
sys/dev/usb/umodemvar.h: netbsd-7-nhusb
sys/dev/usb/ums.c: netbsd-7-nhusb
sys/dev/usb/uplcom.c: netbsd-7-nhusb
sys/dev/usb/urio.c: netbsd-7-nhusb
sys/dev/usb/urio.h: netbsd-7-nhusb
sys/dev/usb/usb.c: netbsd-7-nhusb
sys/dev/usb/usb.h: netbsd-7-nhusb
sys/dev/usb/usb_mem.c: netbsd-7-nhusb
sys/dev/usb/usb_mem.h: netbsd-7-nhusb
sys/dev/usb/usb_quirks.c: netbsd-7-nhusb
sys/dev/usb/usb_quirks.h: netbsd-7-nhusb
sys/dev/usb/usb_subr.c: netbsd-7-nhusb
sys/dev/usb/usbdevices.config: netbsd-7-nhusb
sys/dev/usb/usbdevs: netbsd-7-nhusb
sys/dev/usb/usbdevs.h: netbsd-7-nhusb
sys/dev/usb/usbdevs_data.h: netbsd-7-nhusb
sys/dev/usb/usbdi.c: netbsd-7-nhusb
sys/dev/usb/usbdi.h: netbsd-7-nhusb
sys/dev/usb/usbdi_util.c: netbsd-7-nhusb
sys/dev/usb/usbdi_util.h: netbsd-7-nhusb
sys/dev/usb/usbdivar.h: netbsd-7-nhusb
sys/dev/usb/usbhid.h: netbsd-7-nhusb
sys/dev/usb/usbhist.h: netbsd-7-nhusb
sys/dev/usb/usbroothub.c: netbsd-7-nhusb
sys/dev/usb/usbroothub.h: netbsd-7-nhusb
sys/dev/usb/usbroothub_subr.c: delete
sys/dev/usb/usbroothub_subr.h: delete
sys/dev/usb/uscanner.c: netbsd-7-nhusb
sys/dev/usb/uslsa.c: netbsd-7-nhusb
sys/dev/usb/usscanner.c: netbsd-7-nhusb
sys/dev/usb/ustir.c: netbsd-7-nhusb
sys/dev/usb/uthum.c: netbsd-7-nhusb
sys/dev/usb/utoppy.c: netbsd-7-nhusb
sys/dev/usb/uts.c: netbsd-7-nhusb
sys/dev/usb/uvideo.c: netbsd-7-nhusb
sys/dev/usb/uvisor.c: netbsd-7-nhusb
sys/dev/usb/uvscom.c: netbsd-7-nhusb
sys/dev/usb/uyap.c: netbsd-7-nhusb
sys/dev/usb/uyap_firmware.h: netbsd-7-nhusb
sys/dev/usb/uyurex.c: netbsd-7-nhusb
sys/dev/usb/x1input_rdesc.h: netbsd-7-nhusb
sys/dev/usb/xhci.c: netbsd-7-nhusb
sys/dev/usb/xhcireg.h: netbsd-7-nhusb
sys/dev/usb/xhcivar.h: netbsd-7-nhusb
sys/dev/usb/xinput_rdesc.h: netbsd-7-nhusb
sys/external/bsd/common/conf/files.linux: netbsd-7-nhusb
sys/external/bsd/common/include/linux/err.h: netbsd-7-nhusb
sys/external/bsd/common/include/linux/kernel.h: netbsd-7-nhusb
sys/external/bsd/common/include/linux/workqueue.h: netbsd-7-nhusb
sys/external/bsd/common/linux/linux_work.c: netbsd-7-nhusb
sys/external/bsd/drm2/dist/drm/radeon/atombios_encoders.c: netbsd-7-nhusb
sys/external/bsd/drm2/dist/drm/radeon/radeon_legacy_encoders.c: netbsd-7-nhusb
sys/external/bsd/drm2/drm/files.drmkms: netbsd-7-nhusb
sys/external/bsd/drm2/i915drm/files.i915drmkms: netbsd-7-nhusb
sys/external/bsd/drm2/include/linux/err.h: delete
sys/external/bsd/drm2/include/linux/workqueue.h: delete
sys/external/bsd/drm2/linux/files.drmkms_linux: netbsd-7-nhusb
sys/external/bsd/drm2/linux/linux_work.c: delete
sys/external/bsd/dwc2/dwc2.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dwc2.h: netbsd-7-nhusb
sys/external/bsd/dwc2/dwc2var.h: netbsd-7-nhusb
sys/external/bsd/dwc2/dwctwo2netbsd: netbsd-7-nhusb
sys/external/bsd/dwc2/conf/files.dwc2: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_core.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_core.h: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_coreintr.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_hcd.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_hcd.h: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_hcdddma.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_hcdintr.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_hcdqueue.c: netbsd-7-nhusb
sys/external/bsd/dwc2/dist/dwc2_hw.h: netbsd-7-nhusb
sys/modules/drmkms_linux/Makefile: netbsd-7-nhusb
sys/modules/i915drmkms/Makefile: netbsd-7-nhusb
sys/rump/dev/lib/libugenhc/ugenhc.c: netbsd-7-nhusb
sys/rump/dev/lib/libusb/Makefile: netbsd-7-nhusb
sys/rump/dev/lib/libusb/USB.ioconf: netbsd-7-nhusb
sys/rump/dev/lib/libusb/usb_at_ugenhc.c: delete
sys/rump/dev/lib/libusb/opt/opt_usb.h: delete
sys/rump/dev/lib/libusb/opt/opt_usbverbose.h: delete
sys/sys/mbuf.h: netbsd-7-nhusb
usr.sbin/usbdevs/usbdevs.8: netbsd-7-nhusb
usr.sbin/usbdevs/usbdevs.c: netbsd-7-nhusb
Merge netbsd-7-nhusb:
- API / infrastructure changes to support memory management changes.
- Memory management improvements and bug fixes.
- HCDs should now be MP safe
- conversion to KERNHIST based debug
- FS/LS isoc support on ehci(4).
- conversion to kmem(9)
- Some USB 3 support - mostly from Takahiro HAYASHI (t-hash).
- interrupt transfers now get proper DMA operations
- general bug fixes
- kern/48308
- uhub status notification improvements
- umass(4) probe fix (applied to HEAD already)
- ohci(4) short transfer fix
- Change the SOFTINT level from NET to SERIAL for the USB softint handler.
This gives the callback a chance of running when another softint handler
at SOFTINT_NET has blocked holding a lock, e.g. softnet_lock and most of
the network stack.
- kern/49065 - ifconfig tun0 ... sequence locks up system / lockup:
softnet_lock held across usb xfr
- kern/50491 - unkillable wait in usbd_transfer while using usmsc0
on raspberry pi 2
- kern/51395 - USB Ethernet makes xhci hang
- Various improvements to slhci(4)
- Various improvements to dwc2(4)
|
| 1.86.2.2 |
| 20-Mar-2017 |
pgoyette | Sync with HEAD
|
| 1.86.2.1 |
| 07-Jan-2017 |
pgoyette | Sync with HEAD. (Note that most of these changes are simply $NetBSD$
tag issues.)
|
| 1.90.2.1 |
| 31-Jan-2018 |
martin | Pull up following revision(s) (requested by skrll in ticket #509):
sys/dev/usb/if_ural.c: revision 1.53
sys/dev/usb/if_run.c: revision 1.25
sys/dev/usb/ustir.c: revision 1.39
sys/dev/usb/irmce.c: revision 1.4
sys/dev/usb/if_urtwn.c: revision 1.56
sys/dev/usb/pseye.c: revision 1.24
sys/dev/usb/if_rum.c: revision 1.59
sys/dev/usb/if_upl.c: revision 1.61
sys/dev/usb/ucom.c: revision 1.120
sys/dev/usb/if_zyd.c: revision 1.45
sys/dev/usb/if_axen.c: revision 1.12
sys/dev/usb/umidi.c: revision 1.74
sys/dev/usb/if_udav.c: revision 1.52
sys/dev/usb/if_athn_usb.c: revision 1.25
sys/dev/usb/usscanner.c: revision 1.43
sys/dev/usb/ualea.c: revision 1.6 - 1.9
sys/dev/usb/if_upgt.c: revision 1.18
sys/dev/usb/if_atu.c: revision 1.56
sys/dev/usb/utoppy.c: revision 1.30
sys/dev/usb/ubt.c: revision 1.60
sys/dev/usb/if_urtw.c: revision 1.14
sys/dev/usb/uirda.c: revision 1.43
sys/dev/usb/umass.c: revision 1.163
sys/dev/usb/if_cdce.c: revision 1.45
sys/dev/usb/if_cue.c: revision 1.77
sys/dev/usb/if_kue.c: revision 1.91
sys/dev/usb/uvideo.c: revision 1.46
sys/dev/usb/uhso.c: revision 1.27
sys/dev/usb/if_smsc.c: revision 1.33
sys/dev/usb/ugen.c: revision 1.137
sys/dev/usb/if_axe.c: revision 1.84
sys/dev/usb/if_aue.c: revision 1.142
sys/dev/usb/uscanner.c: revision 1.82
sys/dev/usb/if_urndis.c: revision 1.17
sys/dev/usb/udsir.c: revision 1.6
sys/dev/usb/if_url.c: revision 1.57
sys/dev/usb/if_otus.c: revision 1.32
sys/dev/usb/ulpt.c: revision 1.99
PR kern/52931 Kernel panics with Atheros usb wireless interface
Audit the flags to usbd_create_xfer so that USBD_FORCE_SHORT_XFER is
supplied wherever such a transfer is setup. We can drop
USBD_SHORT_XFER_OK as it has not bearing on number of TDs
ualea: Tidy up a bit. Fulfil requests completely.
Don't subtract uninitialized pktsize in error path.
|
| 1.91.2.1 |
| 28-Jul-2018 |
pgoyette | Sync with HEAD
|
| 1.92.2.2 |
| 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.92.2.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.96.2.1 |
| 01-Sep-2019 |
martin | Pull up following revision(s) (requested by mrg in ticket #135):
distrib/sets/lists/comp/mi 1.2279
distrib/sets/lists/modules/mi 1.123
share/man/man9/Makefile 1.438
share/man/man9/usbnet.9 1.1-1.9
sys/dev/ic/rndisreg.h 1.3
sys/dev/usb/TODO 1.47-1.52
sys/dev/usb/TODO.usbmp 1.15,1.16
sys/dev/usb/files.usb 1.157-1.167
sys/dev/usb/if_aue.c 1.155-1.161
sys/dev/usb/if_auereg.h 1.30-1.32
sys/dev/usb/if_axe.c 1.103-1.119
sys/dev/usb/if_axen.c 1.51-1.53,1.55-1.67
sys/dev/usb/if_axenreg.h 1.15
sys/dev/usb/if_cdce.c 1.54-1.67
sys/dev/usb/if_cue.c 1.85,1.86
sys/dev/usb/if_cuereg.h 1.23
sys/dev/usb/if_kue.c 1.97-1.100
sys/dev/usb/if_kuereg.h 1.23,1.24
sys/dev/usb/if_mue.c 1.51-1.55
sys/dev/usb/if_muereg.h 1.6
sys/dev/usb/if_muevar.h 1.9
sys/dev/usb/if_smsc.c 1.46-1.61
sys/dev/usb/if_smscreg.h 1.6
sys/dev/usb/if_smscvar.h delete
sys/dev/usb/if_udav.c 1.60-1.71
sys/dev/usb/if_udavreg.h 1.14,1.15
sys/dev/usb/if_upl.c 1.65,1.66
sys/dev/usb/if_ure.c 1.15-1.31
sys/dev/usb/if_urevar.h 1.4,1.5
sys/dev/usb/if_url.c 1.67-1.70
sys/dev/usb/if_urlreg.h 1.14
sys/dev/usb/if_urndis.c 1.22-1.33
sys/dev/usb/if_urtwn.c 1.72
sys/dev/usb/ohci.c 1.290
sys/dev/usb/uhub.c 1.143
sys/dev/usb/usb.c 1.180
sys/dev/usb/usb.h 1.118
sys/dev/usb/usb_mem.c 1.71
sys/dev/usb/usb_subr.c 1.238,1.239
sys/dev/usb/usbdevs 1.772
sys/dev/usb/usbdi.c 1.183,1.186
sys/dev/usb/usbdi.h 1.97
sys/dev/usb/usbdi_util.c 1.75
sys/dev/usb/usbhist.h 1.5,1.6
sys/dev/usb/usbnet.c 1.1-1.24
sys/dev/usb/usbnet.h 1.1-1.14
sys/dev/usb/usbroothub.c 1.9
sys/dev/usb/xhci.c 1.109,1.110
sys/modules/Makefile 1.223
sys/modules/usbnet/Makefile 1.1
usbnet(9): Add common framework for USB network devices.
This bring various safety fixes to all updated drivers,
and includes locking clean up, detach safety when being
used or not, separate rx/tx locks to improve performance,
porting to NET_MPSAFE, many edge/error case bugs in
drivers fixed, as well as resovling PRs 54303 and 54308.
These drivers are converted: axe(4), axen(4), aue(4),
cdce(4), cue(4), kue(4), mue(4), smsc(4), udav(4),
upl(4), ure(4), url(4), and urndis(4).
|
| 1.101.2.1 |
| 29-Feb-2020 |
ad | Sync with head.
|
| 1.104.8.1 |
| 17-Jun-2021 |
thorpej | Sync w/ HEAD.
|
