if_kue.c revision 1.29
1 /* $NetBSD: if_kue.c,v 1.29 2000/06/01 14:28:58 augustss Exp $ */ 2 /* 3 * Copyright (c) 1997, 1998, 1999, 2000 4 * Bill Paul <wpaul (at) ee.columbia.edu>. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Bill Paul. 17 * 4. Neither the name of the author nor the names of any co-contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 31 * THE POSSIBILITY OF SUCH DAMAGE. 32 * 33 * $FreeBSD: src/sys/dev/usb/if_kue.c,v 1.14 2000/01/14 01:36:15 wpaul Exp $ 34 */ 35 36 /* 37 * Kawasaki LSI KL5KUSB101B USB to ethernet adapter driver. 38 * 39 * Written by Bill Paul <wpaul (at) ee.columbia.edu> 40 * Electrical Engineering Department 41 * Columbia University, New York City 42 */ 43 44 /* 45 * The KLSI USB to ethernet adapter chip contains an USB serial interface, 46 * ethernet MAC and embedded microcontroller (called the QT Engine). 47 * The chip must have firmware loaded into it before it will operate. 48 * Packets are passed between the chip and host via bulk transfers. 49 * There is an interrupt endpoint mentioned in the software spec, however 50 * it's currently unused. This device is 10Mbps half-duplex only, hence 51 * there is no media selection logic. The MAC supports a 128 entry 52 * multicast filter, though the exact size of the filter can depend 53 * on the firmware. Curiously, while the software spec describes various 54 * ethernet statistics counters, my sample adapter and firmware combination 55 * claims not to support any statistics counters at all. 56 * 57 * Note that once we load the firmware in the device, we have to be 58 * careful not to load it again: if you restart your computer but 59 * leave the adapter attached to the USB controller, it may remain 60 * powered on and retain its firmware. In this case, we don't need 61 * to load the firmware a second time. 62 * 63 * Special thanks to Rob Furr for providing an ADS Technologies 64 * adapter for development and testing. No monkeys were harmed during 65 * the development of this driver. 66 */ 67 68 /* 69 * Ported to NetBSD and somewhat rewritten by Lennart Augustsson. 70 */ 71 72 /* 73 * TODO: 74 * only use kue_do_request for downloading firmware. 75 * more DPRINTF 76 * proper cleanup on errors 77 */ 78 #if defined(__NetBSD__) 79 #include "opt_inet.h" 80 #include "opt_ns.h" 81 #include "bpfilter.h" 82 #include "rnd.h" 83 #elif defined(__OpenBSD__) 84 #include "bpfilter.h" 85 #endif 86 87 #include <sys/param.h> 88 #include <sys/systm.h> 89 #include <sys/sockio.h> 90 #include <sys/mbuf.h> 91 #include <sys/malloc.h> 92 #include <sys/kernel.h> 93 #include <sys/socket.h> 94 95 #if defined(__FreeBSD__) 96 97 #include <net/ethernet.h> 98 #include <machine/clock.h> /* for DELAY */ 99 #include <sys/bus.h> 100 101 #elif defined(__NetBSD__) || defined(__OpenBSD__) 102 103 #include <sys/device.h> 104 #if NRND > 0 105 #include <sys/rnd.h> 106 #endif 107 108 #endif 109 110 #include <net/if.h> 111 #if defined(__NetBSD__) || defined(__FreeBSD__) 112 #include <net/if_arp.h> 113 #endif 114 #include <net/if_dl.h> 115 116 #if defined(__NetBSD__) || defined(__OpenBSD__) 117 #define BPF_MTAP(ifp, m) bpf_mtap((ifp)->if_bpf, (m)) 118 #else 119 #define BPF_MTAP(ifp, m) bpf_mtap((ifp), (m)) 120 #endif 121 122 #if defined(__FreeBSD__) || NBPFILTER > 0 123 #include <net/bpf.h> 124 #endif 125 126 #if defined(__NetBSD__) 127 #include <net/if_ether.h> 128 #ifdef INET 129 #include <netinet/in.h> 130 #include <netinet/if_inarp.h> 131 #endif 132 #endif /* defined (__NetBSD__) */ 133 134 #if defined(__OpenBSD__) 135 #ifdef INET 136 #include <netinet/in.h> 137 #include <netinet/in_systm.h> 138 #include <netinet/in_var.h> 139 #include <netinet/ip.h> 140 #include <netinet/if_ether.h> 141 #endif 142 #endif /* defined (__OpenBSD__) */ 143 144 #if defined(__NetBSD__) || defined(__OpenBSD__) 145 #ifdef NS 146 #include <netns/ns.h> 147 #include <netns/ns_if.h> 148 #endif 149 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 150 151 #include <dev/usb/usb.h> 152 #include <dev/usb/usbdi.h> 153 #include <dev/usb/usbdi_util.h> 154 #include <dev/usb/usbdevs.h> 155 156 #ifdef __FreeBSD__ 157 #include <dev/usb/usb_ethersubr.h> 158 #endif 159 160 #include <dev/usb/if_kuereg.h> 161 #include <dev/usb/kue_fw.h> 162 163 #ifdef KUE_DEBUG 164 #define DPRINTF(x) if (kuedebug) logprintf x 165 #define DPRINTFN(n,x) if (kuedebug >= (n)) logprintf x 166 int kuedebug = 0; 167 #else 168 #define DPRINTF(x) 169 #define DPRINTFN(n,x) 170 #endif 171 172 /* 173 * Various supported device vendors/products. 174 */ 175 Static struct kue_type kue_devs[] = { 176 { USB_VENDOR_AOX, USB_PRODUCT_AOX_USB101 }, 177 { USB_VENDOR_ADS, USB_PRODUCT_ADS_UBS10BT }, 178 { USB_VENDOR_ATEN, USB_PRODUCT_ATEN_UC10T }, 179 { USB_VENDOR_NETGEAR, USB_PRODUCT_NETGEAR_EA101 }, 180 { USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_ENET }, 181 { USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_ENET2 }, 182 { USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_E45 }, 183 { USB_VENDOR_3COM, USB_PRODUCT_3COM_3C19250 }, 184 { USB_VENDOR_3COM, USB_PRODUCT_3COM_3C460 }, 185 { USB_VENDOR_COREGA, USB_PRODUCT_COREGA_ETHER_USB_T }, 186 { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650C }, 187 { USB_VENDOR_SMC, USB_PRODUCT_SMC_2102USB }, 188 { USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10T }, 189 { USB_VENDOR_KLSI, USB_PRODUCT_KLSI_DUH3E10BT }, 190 { 0, 0 } 191 }; 192 193 USB_DECLARE_DRIVER(kue); 194 195 Static int kue_tx_list_init(struct kue_softc *); 196 Static int kue_rx_list_init(struct kue_softc *); 197 Static int kue_newbuf(struct kue_softc *, struct kue_chain *,struct mbuf *); 198 Static int kue_send(struct kue_softc *, struct mbuf *, int); 199 Static int kue_open_pipes(struct kue_softc *); 200 Static void kue_rxeof(usbd_xfer_handle, usbd_private_handle, usbd_status); 201 Static void kue_txeof(usbd_xfer_handle, usbd_private_handle, usbd_status); 202 Static void kue_start(struct ifnet *); 203 Static int kue_ioctl(struct ifnet *, u_long, caddr_t); 204 Static void kue_init(void *); 205 Static void kue_stop(struct kue_softc *); 206 Static void kue_watchdog(struct ifnet *); 207 208 Static void kue_setmulti(struct kue_softc *); 209 Static void kue_reset(struct kue_softc *); 210 211 Static usbd_status kue_ctl(struct kue_softc *, int, u_int8_t, 212 u_int16_t, void *, u_int32_t); 213 Static usbd_status kue_setword(struct kue_softc *, u_int8_t, u_int16_t); 214 Static int kue_is_warm(struct kue_softc *); 215 Static int kue_load_fw(struct kue_softc *); 216 217 #if defined(__FreeBSD__) 218 #ifndef lint 219 static const char rcsid[] = 220 "$FreeBSD: src/sys/dev/usb/if_kue.c,v 1.14 2000/01/14 01:36:15 wpaul Exp $"; 221 #endif 222 223 Static void kue_rxstart(struct ifnet *); 224 Static void kue_shutdown(device_t); 225 226 Static struct usb_qdat kue_qdat; 227 228 Static device_method_t kue_methods[] = { 229 /* Device interface */ 230 DEVMETHOD(device_probe, kue_match), 231 DEVMETHOD(device_attach, kue_attach), 232 DEVMETHOD(device_detach, kue_detach), 233 DEVMETHOD(device_shutdown, kue_shutdown), 234 235 { 0, 0 } 236 }; 237 238 Static driver_t kue_driver = { 239 "kue", 240 kue_methods, 241 sizeof(struct kue_softc) 242 }; 243 244 Static devclass_t kue_devclass; 245 246 DRIVER_MODULE(if_kue, uhub, kue_driver, kue_devclass, usbd_driver_load, 0); 247 248 #endif /* __FreeBSD__ */ 249 250 #define KUE_DO_REQUEST(dev, req, data) \ 251 usbd_do_request_flags(dev, req, data, USBD_NO_TSLEEP, NULL) 252 253 Static usbd_status 254 kue_setword(struct kue_softc *sc, u_int8_t breq, u_int16_t word) 255 { 256 usb_device_request_t req; 257 usbd_status err; 258 int s; 259 260 DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev),__FUNCTION__)); 261 262 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 263 req.bRequest = breq; 264 USETW(req.wValue, word); 265 USETW(req.wIndex, 0); 266 USETW(req.wLength, 0); 267 268 s = splusb(); 269 err = KUE_DO_REQUEST(sc->kue_udev, &req, NULL); 270 splx(s); 271 272 return (err); 273 } 274 275 Static usbd_status 276 kue_ctl(struct kue_softc *sc, int rw, u_int8_t breq, u_int16_t val, 277 void *data, u_int32_t len) 278 { 279 usb_device_request_t req; 280 usbd_status err; 281 int s; 282 283 DPRINTFN(10,("%s: %s: enter, len=%d\n", USBDEVNAME(sc->kue_dev), 284 __FUNCTION__, len)); 285 286 if (rw == KUE_CTL_WRITE) 287 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 288 else 289 req.bmRequestType = UT_READ_VENDOR_DEVICE; 290 291 req.bRequest = breq; 292 USETW(req.wValue, val); 293 USETW(req.wIndex, 0); 294 USETW(req.wLength, len); 295 296 s = splusb(); 297 err = KUE_DO_REQUEST(sc->kue_udev, &req, data); 298 splx(s); 299 300 return (err); 301 } 302 303 Static int 304 kue_is_warm(struct kue_softc *sc) 305 { 306 usbd_status err; 307 usb_device_request_t req; 308 309 /* Just issue some random command. */ 310 req.bmRequestType = UT_READ_VENDOR_DEVICE; 311 req.bRequest = KUE_CMD_GET_ETHER_DESCRIPTOR; 312 USETW(req.wValue, 0); 313 USETW(req.wIndex, 0); 314 USETW(req.wLength, sizeof(sc->kue_desc)); 315 316 err = usbd_do_request(sc->kue_udev, &req, &sc->kue_desc); 317 318 return (!err); 319 } 320 321 Static int 322 kue_load_fw(struct kue_softc *sc) 323 { 324 usbd_status err; 325 326 DPRINTFN(1,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev), __FUNCTION__)); 327 328 /* 329 * First, check if we even need to load the firmware. 330 * If the device was still attached when the system was 331 * rebooted, it may already have firmware loaded in it. 332 * If this is the case, we don't need to do it again. 333 * And in fact, if we try to load it again, we'll hang, 334 * so we have to avoid this condition if we don't want 335 * to look stupid. 336 * 337 * We can test this quickly by issuing a request that 338 * is only valid after firmware download. 339 */ 340 if (kue_is_warm(sc)) { 341 printf("%s: warm boot, no firmware download\n", 342 USBDEVNAME(sc->kue_dev)); 343 return (0); 344 } 345 346 printf("%s: cold boot, downloading firmware\n", 347 USBDEVNAME(sc->kue_dev)); 348 349 /* Load code segment */ 350 DPRINTFN(1,("%s: kue_load_fw: download code_seg\n", 351 USBDEVNAME(sc->kue_dev))); 352 err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN, 353 0, kue_code_seg, sizeof(kue_code_seg)); 354 if (err) { 355 printf("%s: failed to load code segment: %s\n", 356 USBDEVNAME(sc->kue_dev), usbd_errstr(err)); 357 return (EIO); 358 } 359 360 /* Load fixup segment */ 361 DPRINTFN(1,("%s: kue_load_fw: download fix_seg\n", 362 USBDEVNAME(sc->kue_dev))); 363 err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN, 364 0, kue_fix_seg, sizeof(kue_fix_seg)); 365 if (err) { 366 printf("%s: failed to load fixup segment: %s\n", 367 USBDEVNAME(sc->kue_dev), usbd_errstr(err)); 368 return (EIO); 369 } 370 371 /* Send trigger command. */ 372 DPRINTFN(1,("%s: kue_load_fw: download trig_seg\n", 373 USBDEVNAME(sc->kue_dev))); 374 err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN, 375 0, kue_trig_seg, sizeof(kue_trig_seg)); 376 if (err) { 377 printf("%s: failed to load trigger segment: %s\n", 378 USBDEVNAME(sc->kue_dev), usbd_errstr(err)); 379 return (EIO); 380 } 381 382 usbd_delay_ms(sc->kue_udev, 10); 383 384 /* 385 * Reload device descriptor. 386 * Why? The chip without the firmware loaded returns 387 * one revision code. The chip with the firmware 388 * loaded and running returns a *different* revision 389 * code. This confuses the quirk mechanism, which is 390 * dependent on the revision data. 391 */ 392 (void)usbd_reload_device_desc(sc->kue_udev); 393 394 DPRINTFN(1,("%s: %s: done\n", USBDEVNAME(sc->kue_dev), __FUNCTION__)); 395 396 /* Reset the adapter. */ 397 kue_reset(sc); 398 399 return (0); 400 } 401 402 Static void 403 kue_setmulti(struct kue_softc *sc) 404 { 405 struct ifnet *ifp = GET_IFP(sc); 406 #if defined(__FreeBSD__) 407 struct ifmultiaddr *ifma; 408 #elif defined(__NetBSD__) || defined(__OpenBSD__) 409 struct ether_multi *enm; 410 struct ether_multistep step; 411 #endif 412 int i; 413 414 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev), __FUNCTION__)); 415 416 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 417 sc->kue_rxfilt |= KUE_RXFILT_ALLMULTI; 418 sc->kue_rxfilt &= ~KUE_RXFILT_MULTICAST; 419 kue_setword(sc, KUE_CMD_SET_PKT_FILTER, sc->kue_rxfilt); 420 return; 421 } 422 423 sc->kue_rxfilt &= ~KUE_RXFILT_ALLMULTI; 424 425 i = 0; 426 #if defined(__FreeBSD__) 427 for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL; 428 ifma = ifma->ifma_link.le_next) { 429 if (ifma->ifma_addr->sa_family != AF_LINK) 430 continue; 431 /* 432 * If there are too many addresses for the 433 * internal filter, switch over to allmulti mode. 434 */ 435 if (i == KUE_MCFILTCNT(sc)) 436 break; 437 bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr), 438 KUE_MCFILT(sc, i), ETHER_ADDR_LEN); 439 i++; 440 } 441 #elif defined(__NetBSD__) || defined(__OpenBSD__) 442 #if defined (__NetBSD__) 443 ETHER_FIRST_MULTI(step, &sc->kue_ec, enm); 444 #else 445 ETHER_FIRST_MULTI(step, &sc->arpcom, enm); 446 #endif 447 while (enm != NULL) { 448 if (i == KUE_MCFILTCNT(sc)) 449 break; 450 #if 0 451 if (memcmp(enm->enm_addrlo, 452 enm->enm_addrhi, ETHER_ADDR_LEN) != 0) { 453 ifp->if_flags |= IFF_ALLMULTI; 454 /* XXX what now? */ 455 return; 456 } 457 #endif 458 memcpy(KUE_MCFILT(sc, i), enm->enm_addrlo, ETHER_ADDR_LEN); 459 ETHER_NEXT_MULTI(step, enm); 460 i++; 461 } 462 #endif 463 464 if (i == KUE_MCFILTCNT(sc)) 465 sc->kue_rxfilt |= KUE_RXFILT_ALLMULTI; 466 else { 467 sc->kue_rxfilt |= KUE_RXFILT_MULTICAST; 468 kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SET_MCAST_FILTERS, 469 i, sc->kue_mcfilters, i * ETHER_ADDR_LEN); 470 } 471 472 kue_setword(sc, KUE_CMD_SET_PKT_FILTER, sc->kue_rxfilt); 473 } 474 475 /* 476 * Issue a SET_CONFIGURATION command to reset the MAC. This should be 477 * done after the firmware is loaded into the adapter in order to 478 * bring it into proper operation. 479 */ 480 Static void 481 kue_reset(struct kue_softc *sc) 482 { 483 usbd_status err; 484 485 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev), __FUNCTION__)); 486 487 err = usbd_set_config_no(sc->kue_udev, KUE_CONFIG_NO, 0); 488 if (err) 489 printf("%s: reset failed\n", USBDEVNAME(sc->kue_dev)); 490 491 /* Wait a little while for the chip to get its brains in order. */ 492 usbd_delay_ms(sc->kue_udev, 10); 493 } 494 495 /* 496 * Probe for a KLSI chip. 497 */ 498 USB_MATCH(kue) 499 { 500 USB_MATCH_START(kue, uaa); 501 struct kue_type *t; 502 503 DPRINTFN(25,("kue_match: enter\n")); 504 505 if (uaa->iface != NULL) 506 return (UMATCH_NONE); 507 508 for (t = kue_devs; t->kue_vid != 0; t++) 509 if (uaa->vendor == t->kue_vid && uaa->product == t->kue_did) 510 return (UMATCH_VENDOR_PRODUCT); 511 512 return (UMATCH_NONE); 513 } 514 515 /* 516 * Attach the interface. Allocate softc structures, do 517 * setup and ethernet/BPF attach. 518 */ 519 USB_ATTACH(kue) 520 { 521 USB_ATTACH_START(kue, sc, uaa); 522 char devinfo[1024]; 523 int s; 524 struct ifnet *ifp; 525 usbd_device_handle dev = uaa->device; 526 usbd_interface_handle iface; 527 usbd_status err; 528 usb_interface_descriptor_t *id; 529 usb_endpoint_descriptor_t *ed; 530 int i; 531 532 #ifdef __FreeBSD__ 533 bzero(sc, sizeof(struct kue_softc)); 534 #endif 535 536 DPRINTFN(5,(" : kue_attach: sc=%p, dev=%p", sc, dev)); 537 538 usbd_devinfo(dev, 0, devinfo); 539 USB_ATTACH_SETUP; 540 printf("%s: %s\n", USBDEVNAME(sc->kue_dev), devinfo); 541 542 err = usbd_set_config_no(dev, KUE_CONFIG_NO, 0); 543 if (err) { 544 printf("%s: setting config no failed\n", 545 USBDEVNAME(sc->kue_dev)); 546 USB_ATTACH_ERROR_RETURN; 547 } 548 549 sc->kue_udev = dev; 550 sc->kue_product = uaa->product; 551 sc->kue_vendor = uaa->vendor; 552 553 /* Load the firmware into the NIC. */ 554 if (kue_load_fw(sc)) { 555 printf("%s: loading firmware failed\n", 556 USBDEVNAME(sc->kue_dev)); 557 USB_ATTACH_ERROR_RETURN; 558 } 559 560 err = usbd_device2interface_handle(dev, KUE_IFACE_IDX, &iface); 561 if (err) { 562 printf("%s: getting interface handle failed\n", 563 USBDEVNAME(sc->kue_dev)); 564 USB_ATTACH_ERROR_RETURN; 565 } 566 567 sc->kue_iface = iface; 568 id = usbd_get_interface_descriptor(iface); 569 570 /* Find endpoints. */ 571 for (i = 0; i < id->bNumEndpoints; i++) { 572 ed = usbd_interface2endpoint_descriptor(iface, i); 573 if (ed == NULL) { 574 printf("%s: couldn't get ep %d\n", 575 USBDEVNAME(sc->kue_dev), i); 576 USB_ATTACH_ERROR_RETURN; 577 } 578 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 579 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 580 sc->kue_ed[KUE_ENDPT_RX] = ed->bEndpointAddress; 581 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && 582 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 583 sc->kue_ed[KUE_ENDPT_TX] = ed->bEndpointAddress; 584 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 585 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { 586 sc->kue_ed[KUE_ENDPT_INTR] = ed->bEndpointAddress; 587 } 588 } 589 590 if (sc->kue_ed[KUE_ENDPT_RX] == 0 || sc->kue_ed[KUE_ENDPT_TX] == 0) { 591 printf("%s: missing endpoint\n", USBDEVNAME(sc->kue_dev)); 592 USB_ATTACH_ERROR_RETURN; 593 } 594 595 /* Read ethernet descriptor */ 596 err = kue_ctl(sc, KUE_CTL_READ, KUE_CMD_GET_ETHER_DESCRIPTOR, 597 0, &sc->kue_desc, sizeof(sc->kue_desc)); 598 if (err) { 599 printf("%s: could not read Ethernet descriptor\n", 600 USBDEVNAME(sc->kue_dev)); 601 USB_ATTACH_ERROR_RETURN; 602 } 603 604 sc->kue_mcfilters = malloc(KUE_MCFILTCNT(sc) * ETHER_ADDR_LEN, 605 M_USBDEV, M_NOWAIT); 606 if (sc->kue_mcfilters == NULL) { 607 printf("%s: no memory for multicast filter buffer\n", 608 USBDEVNAME(sc->kue_dev)); 609 USB_ATTACH_ERROR_RETURN; 610 } 611 612 s = splimp(); 613 614 /* 615 * A KLSI chip was detected. Inform the world. 616 */ 617 #if defined(__FreeBSD__) 618 printf("%s: Ethernet address: %6D\n", USBDEVNAME(sc->kue_dev), 619 sc->kue_desc.kue_macaddr, ":"); 620 621 bcopy(sc->kue_desc.kue_macaddr, 622 (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN); 623 624 ifp = GET_IFP(sc); 625 ifp->if_softc = sc; 626 ifp->if_unit = sc->kue_unit; 627 ifp->if_name = "kue"; 628 ifp->if_mtu = ETHERMTU; 629 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 630 ifp->if_ioctl = kue_ioctl; 631 ifp->if_output = ether_output; 632 ifp->if_start = kue_start; 633 ifp->if_watchdog = kue_watchdog; 634 ifp->if_init = kue_init; 635 ifp->if_snd.ifq_maxlen = IFQ_MAXLEN; 636 637 kue_qdat.ifp = ifp; 638 kue_qdat.if_rxstart = kue_rxstart; 639 640 /* 641 * Call MI attach routines. 642 */ 643 if_attach(ifp); 644 ether_ifattach(ifp); 645 bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header)); 646 usb_register_netisr(); 647 648 #elif defined(__NetBSD__) || defined(__OpenBSD__) 649 650 printf("%s: Ethernet address %s\n", USBDEVNAME(sc->kue_dev), 651 ether_sprintf(sc->kue_desc.kue_macaddr)); 652 653 /* Initialize interface info.*/ 654 ifp = GET_IFP(sc); 655 ifp->if_softc = sc; 656 ifp->if_mtu = ETHERMTU; 657 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 658 ifp->if_ioctl = kue_ioctl; 659 ifp->if_start = kue_start; 660 ifp->if_watchdog = kue_watchdog; 661 #if defined(__OpenBSD__) 662 ifp->if_snd.ifq_maxlen = IFQ_MAXLEN; 663 #endif 664 strncpy(ifp->if_xname, USBDEVNAME(sc->kue_dev), IFNAMSIZ); 665 666 /* Attach the interface. */ 667 if_attach(ifp); 668 Ether_ifattach(ifp, sc->kue_desc.kue_macaddr); 669 670 #if NBPFILTER > 0 671 bpfattach(&ifp->if_bpf, ifp, DLT_EN10MB, 672 sizeof(struct ether_header)); 673 #endif 674 #if NRND > 0 675 rnd_attach_source(&sc->rnd_source, USBDEVNAME(sc->kue_dev), 676 RND_TYPE_NET, 0); 677 #endif 678 679 #endif /* __NetBSD__ */ 680 sc->kue_attached = 1; 681 splx(s); 682 683 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->kue_udev, 684 USBDEV(sc->kue_dev)); 685 686 USB_ATTACH_SUCCESS_RETURN; 687 } 688 689 USB_DETACH(kue) 690 { 691 USB_DETACH_START(kue, sc); 692 struct ifnet *ifp = GET_IFP(sc); 693 int s; 694 695 s = splusb(); /* XXX why? */ 696 697 if (sc->kue_mcfilters != NULL) { 698 free(sc->kue_mcfilters, M_USBDEV); 699 sc->kue_mcfilters = NULL; 700 } 701 702 if (!sc->kue_attached) { 703 /* Detached before attached finished, so just bail out. */ 704 splx(s); 705 return (0); 706 } 707 708 if (ifp->if_flags & IFF_RUNNING) 709 kue_stop(sc); 710 711 #if defined(__NetBSD__) 712 #if NRND > 0 713 rnd_detach_source(&sc->rnd_source); 714 #endif 715 #if NBPFILTER > 0 716 bpfdetach(ifp); 717 #endif 718 ether_ifdetach(ifp); 719 #endif /* __NetBSD__ */ 720 721 if_detach(ifp); 722 723 #ifdef DIAGNOSTIC 724 if (sc->kue_ep[KUE_ENDPT_TX] != NULL || 725 sc->kue_ep[KUE_ENDPT_RX] != NULL || 726 sc->kue_ep[KUE_ENDPT_INTR] != NULL) 727 printf("%s: detach has active endpoints\n", 728 USBDEVNAME(sc->kue_dev)); 729 #endif 730 731 sc->kue_attached = 0; 732 splx(s); 733 734 return (0); 735 } 736 737 #if defined(__NetBSD__) || defined(__OpenBSD__) 738 int 739 kue_activate(device_ptr_t self, enum devact act) 740 { 741 struct kue_softc *sc = (struct kue_softc *)self; 742 743 DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev), __FUNCTION__)); 744 745 switch (act) { 746 case DVACT_ACTIVATE: 747 return (EOPNOTSUPP); 748 break; 749 750 case DVACT_DEACTIVATE: 751 #if defined(__NetBSD__) 752 /* Deactivate the interface. */ 753 if_deactivate(&sc->kue_ec.ec_if); 754 #endif 755 sc->kue_dying = 1; 756 break; 757 } 758 return (0); 759 } 760 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 761 762 /* 763 * Initialize an RX descriptor and attach an MBUF cluster. 764 */ 765 Static int 766 kue_newbuf(struct kue_softc *sc, struct kue_chain *c, struct mbuf *m) 767 { 768 struct mbuf *m_new = NULL; 769 770 DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev),__FUNCTION__)); 771 772 if (m == NULL) { 773 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 774 if (m_new == NULL) { 775 printf("%s: no memory for rx list " 776 "-- packet dropped!\n", USBDEVNAME(sc->kue_dev)); 777 return (ENOBUFS); 778 } 779 780 MCLGET(m_new, M_DONTWAIT); 781 if (!(m_new->m_flags & M_EXT)) { 782 printf("%s: no memory for rx list " 783 "-- packet dropped!\n", USBDEVNAME(sc->kue_dev)); 784 m_freem(m_new); 785 return (ENOBUFS); 786 } 787 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 788 } else { 789 m_new = m; 790 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 791 m_new->m_data = m_new->m_ext.ext_buf; 792 } 793 794 c->kue_mbuf = m_new; 795 796 return (0); 797 } 798 799 Static int 800 kue_rx_list_init(struct kue_softc *sc) 801 { 802 struct kue_cdata *cd; 803 struct kue_chain *c; 804 int i; 805 806 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev), __FUNCTION__)); 807 808 cd = &sc->kue_cdata; 809 for (i = 0; i < KUE_RX_LIST_CNT; i++) { 810 c = &cd->kue_rx_chain[i]; 811 c->kue_sc = sc; 812 c->kue_idx = i; 813 if (kue_newbuf(sc, c, NULL) == ENOBUFS) 814 return (ENOBUFS); 815 if (c->kue_xfer == NULL) { 816 c->kue_xfer = usbd_alloc_xfer(sc->kue_udev); 817 if (c->kue_xfer == NULL) 818 return (ENOBUFS); 819 c->kue_buf = usbd_alloc_buffer(c->kue_xfer, KUE_BUFSZ); 820 if (c->kue_buf == NULL) 821 return (ENOBUFS); /* XXX free xfer */ 822 } 823 } 824 825 return (0); 826 } 827 828 Static int 829 kue_tx_list_init(struct kue_softc *sc) 830 { 831 struct kue_cdata *cd; 832 struct kue_chain *c; 833 int i; 834 835 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev), __FUNCTION__)); 836 837 cd = &sc->kue_cdata; 838 for (i = 0; i < KUE_TX_LIST_CNT; i++) { 839 c = &cd->kue_tx_chain[i]; 840 c->kue_sc = sc; 841 c->kue_idx = i; 842 c->kue_mbuf = NULL; 843 if (c->kue_xfer == NULL) { 844 c->kue_xfer = usbd_alloc_xfer(sc->kue_udev); 845 if (c->kue_xfer == NULL) 846 return (ENOBUFS); 847 c->kue_buf = usbd_alloc_buffer(c->kue_xfer, KUE_BUFSZ); 848 if (c->kue_buf == NULL) 849 return (ENOBUFS); 850 } 851 } 852 853 return (0); 854 } 855 856 #ifdef __FreeBSD__ 857 Static void 858 kue_rxstart(struct ifnet *ifp) 859 { 860 struct kue_softc *sc; 861 struct kue_chain *c; 862 863 sc = ifp->if_softc; 864 c = &sc->kue_cdata.kue_rx_chain[sc->kue_cdata.kue_rx_prod]; 865 866 if (kue_newbuf(sc, c, NULL) == ENOBUFS) { 867 ifp->if_ierrors++; 868 return; 869 } 870 871 /* Setup new transfer. */ 872 usbd_setup_xfer(c->kue_xfer, sc->kue_ep[KUE_ENDPT_RX], 873 c, c->kue_buf, KUE_BUFSZ, USBD_SHORT_XFER_OK | USBD_NO_COPY, 874 USBD_NO_TIMEOUT, kue_rxeof); 875 usbd_transfer(c->kue_xfer); 876 } 877 #endif 878 879 /* 880 * A frame has been uploaded: pass the resulting mbuf chain up to 881 * the higher level protocols. 882 */ 883 Static void 884 kue_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) 885 { 886 struct kue_chain *c = priv; 887 struct kue_softc *sc = c->kue_sc; 888 struct ifnet *ifp = GET_IFP(sc); 889 struct mbuf *m; 890 int total_len = 0; 891 #if defined(__NetBSD__) || defined(__OpenBSD__) 892 int s; 893 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 894 895 DPRINTFN(10,("%s: %s: enter status=%d\n", USBDEVNAME(sc->kue_dev), 896 __FUNCTION__, status)); 897 898 if (sc->kue_dying) 899 return; 900 901 if (!(ifp->if_flags & IFF_RUNNING)) 902 return; 903 904 if (status != USBD_NORMAL_COMPLETION) { 905 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) 906 return; 907 sc->kue_rx_errs++; 908 if (usbd_ratecheck(&sc->kue_rx_notice)) { 909 printf("%s: %u usb errors on rx: %s\n", 910 USBDEVNAME(sc->kue_dev), sc->kue_rx_errs, 911 usbd_errstr(status)); 912 sc->kue_rx_errs = 0; 913 } 914 if (status == USBD_STALLED) 915 usbd_clear_endpoint_stall(sc->kue_ep[KUE_ENDPT_RX]); 916 goto done; 917 } 918 919 usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL); 920 921 DPRINTFN(10,("%s: %s: total_len=%d len=%d\n", USBDEVNAME(sc->kue_dev), 922 __FUNCTION__, total_len, 923 UGETW(mtod(c->kue_mbuf, u_int8_t *)))); 924 925 if (total_len <= 1) 926 goto done; 927 928 m = c->kue_mbuf; 929 /* copy data to mbuf */ 930 memcpy(mtod(m, char*), c->kue_buf, total_len); 931 932 /* No errors; receive the packet. */ 933 total_len = UGETW(mtod(m, u_int8_t *)); 934 m_adj(m, sizeof(u_int16_t)); 935 936 if (total_len < sizeof(struct ether_header)) { 937 ifp->if_ierrors++; 938 goto done; 939 } 940 941 ifp->if_ipackets++; 942 m->m_pkthdr.len = m->m_len = total_len; 943 944 #if defined(__FreeBSD__) 945 m->m_pkthdr.rcvif = (struct ifnet *)&kue_qdat; 946 /* Put the packet on the special USB input queue. */ 947 usb_ether_input(m); 948 949 return; 950 951 #elif defined(__NetBSD__) || defined(__OpenBSD__) 952 m->m_pkthdr.rcvif = ifp; 953 954 s = splimp(); 955 956 /* XXX ugly */ 957 if (kue_newbuf(sc, c, NULL) == ENOBUFS) { 958 ifp->if_ierrors++; 959 goto done1; 960 } 961 962 #if NBPFILTER > 0 963 /* 964 * Handle BPF listeners. Let the BPF user see the packet, but 965 * don't pass it up to the ether_input() layer unless it's 966 * a broadcast packet, multicast packet, matches our ethernet 967 * address or the interface is in promiscuous mode. 968 */ 969 if (ifp->if_bpf) { 970 #if defined(__NetBSD__) 971 struct ether_header *eh = mtod(m, struct ether_header *); 972 BPF_MTAP(ifp, m); 973 if ((ifp->if_flags & IFF_PROMISC) && 974 memcmp(eh->ether_dhost, LLADDR(ifp->if_sadl), 975 ETHER_ADDR_LEN) && 976 !(eh->ether_dhost[0] & 1)) { 977 m_freem(m); 978 goto done1; 979 } 980 #else 981 BPF_MTAP(ifp, m); 982 #endif 983 } 984 #endif 985 986 DPRINTFN(10,("%s: %s: deliver %d\n", USBDEVNAME(sc->kue_dev), 987 __FUNCTION__, m->m_len)); 988 IF_INPUT(ifp, m); 989 done1: 990 splx(s); 991 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 992 993 done: 994 995 /* Setup new transfer. */ 996 usbd_setup_xfer(c->kue_xfer, sc->kue_ep[KUE_ENDPT_RX], 997 c, c->kue_buf, KUE_BUFSZ, USBD_SHORT_XFER_OK | USBD_NO_COPY, 998 USBD_NO_TIMEOUT, kue_rxeof); 999 usbd_transfer(c->kue_xfer); 1000 1001 DPRINTFN(10,("%s: %s: start rx\n", USBDEVNAME(sc->kue_dev), 1002 __FUNCTION__)); 1003 } 1004 1005 /* 1006 * A frame was downloaded to the chip. It's safe for us to clean up 1007 * the list buffers. 1008 */ 1009 1010 Static void 1011 kue_txeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) 1012 { 1013 struct kue_chain *c = priv; 1014 struct kue_softc *sc = c->kue_sc; 1015 struct ifnet *ifp = GET_IFP(sc); 1016 int s; 1017 1018 if (sc->kue_dying) 1019 return; 1020 1021 s = splimp(); 1022 1023 DPRINTFN(10,("%s: %s: enter status=%d\n", USBDEVNAME(sc->kue_dev), 1024 __FUNCTION__, status)); 1025 1026 ifp->if_timer = 0; 1027 ifp->if_flags &= ~IFF_OACTIVE; 1028 1029 if (status != USBD_NORMAL_COMPLETION) { 1030 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) { 1031 splx(s); 1032 return; 1033 } 1034 ifp->if_oerrors++; 1035 printf("%s: usb error on tx: %s\n", USBDEVNAME(sc->kue_dev), 1036 usbd_errstr(status)); 1037 if (status == USBD_STALLED) 1038 usbd_clear_endpoint_stall(sc->kue_ep[KUE_ENDPT_TX]); 1039 splx(s); 1040 return; 1041 } 1042 1043 ifp->if_opackets++; 1044 1045 #if defined(__FreeBSD__) 1046 c->kue_mbuf->m_pkthdr.rcvif = ifp; 1047 usb_tx_done(c->kue_mbuf); 1048 c->kue_mbuf = NULL; 1049 #elif defined(__NetBSD__) || defined(__OpenBSD__) 1050 m_freem(c->kue_mbuf); 1051 c->kue_mbuf = NULL; 1052 1053 if (ifp->if_snd.ifq_head != NULL) 1054 kue_start(ifp); 1055 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 1056 1057 splx(s); 1058 } 1059 1060 Static int 1061 kue_send(struct kue_softc *sc, struct mbuf *m, int idx) 1062 { 1063 int total_len; 1064 struct kue_chain *c; 1065 usbd_status err; 1066 1067 DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev),__FUNCTION__)); 1068 1069 c = &sc->kue_cdata.kue_tx_chain[idx]; 1070 1071 /* 1072 * Copy the mbuf data into a contiguous buffer, leaving two 1073 * bytes at the beginning to hold the frame length. 1074 */ 1075 m_copydata(m, 0, m->m_pkthdr.len, c->kue_buf + 2); 1076 c->kue_mbuf = m; 1077 1078 total_len = m->m_pkthdr.len + 2; 1079 /* XXX what's this? */ 1080 total_len += 64 - (total_len % 64); 1081 1082 /* Frame length is specified in the first 2 bytes of the buffer. */ 1083 c->kue_buf[0] = (u_int8_t)m->m_pkthdr.len; 1084 c->kue_buf[1] = (u_int8_t)(m->m_pkthdr.len >> 8); 1085 1086 usbd_setup_xfer(c->kue_xfer, sc->kue_ep[KUE_ENDPT_TX], 1087 c, c->kue_buf, total_len, USBD_NO_COPY, USBD_DEFAULT_TIMEOUT, kue_txeof); 1088 1089 /* Transmit */ 1090 err = usbd_transfer(c->kue_xfer); 1091 if (err != USBD_IN_PROGRESS) { 1092 printf("%s: kue_send error=%s\n", USBDEVNAME(sc->kue_dev), 1093 usbd_errstr(err)); 1094 kue_stop(sc); 1095 return (EIO); 1096 } 1097 1098 sc->kue_cdata.kue_tx_cnt++; 1099 1100 return (0); 1101 } 1102 1103 Static void 1104 kue_start(struct ifnet *ifp) 1105 { 1106 struct kue_softc *sc = ifp->if_softc; 1107 struct mbuf *m_head = NULL; 1108 1109 DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev),__FUNCTION__)); 1110 1111 if (sc->kue_dying) 1112 return; 1113 1114 if (ifp->if_flags & IFF_OACTIVE) 1115 return; 1116 1117 IF_DEQUEUE(&ifp->if_snd, m_head); 1118 if (m_head == NULL) 1119 return; 1120 1121 if (kue_send(sc, m_head, 0)) { 1122 IF_PREPEND(&ifp->if_snd, m_head); 1123 ifp->if_flags |= IFF_OACTIVE; 1124 return; 1125 } 1126 1127 #if NBPFILTER > 0 1128 /* 1129 * If there's a BPF listener, bounce a copy of this frame 1130 * to him. 1131 */ 1132 if (ifp->if_bpf) 1133 BPF_MTAP(ifp, m_head); 1134 #endif 1135 1136 ifp->if_flags |= IFF_OACTIVE; 1137 1138 /* 1139 * Set a timeout in case the chip goes out to lunch. 1140 */ 1141 ifp->if_timer = 5; 1142 } 1143 1144 Static void 1145 kue_init(void *xsc) 1146 { 1147 struct kue_softc *sc = xsc; 1148 struct ifnet *ifp = GET_IFP(sc); 1149 int s; 1150 u_char *eaddr; 1151 1152 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev),__FUNCTION__)); 1153 1154 if (ifp->if_flags & IFF_RUNNING) 1155 return; 1156 1157 s = splimp(); 1158 1159 #if defined(__FreeBSD__) || defined(__OpenBSD__) 1160 eaddr = sc->arpcom.ac_enaddr; 1161 #elif defined(__NetBSD__) 1162 eaddr = LLADDR(ifp->if_sadl); 1163 #endif /* defined(__NetBSD__) */ 1164 /* Set MAC address */ 1165 kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SET_MAC, 0, eaddr, ETHER_ADDR_LEN); 1166 1167 sc->kue_rxfilt = KUE_RXFILT_UNICAST | KUE_RXFILT_BROADCAST; 1168 1169 /* If we want promiscuous mode, set the allframes bit. */ 1170 if (ifp->if_flags & IFF_PROMISC) 1171 sc->kue_rxfilt |= KUE_RXFILT_PROMISC; 1172 1173 kue_setword(sc, KUE_CMD_SET_PKT_FILTER, sc->kue_rxfilt); 1174 1175 /* I'm not sure how to tune these. */ 1176 #if 0 1177 /* 1178 * Leave this one alone for now; setting it 1179 * wrong causes lockups on some machines/controllers. 1180 */ 1181 kue_setword(sc, KUE_CMD_SET_SOFS, 1); 1182 #endif 1183 kue_setword(sc, KUE_CMD_SET_URB_SIZE, 64); 1184 1185 /* Init TX ring. */ 1186 if (kue_tx_list_init(sc) == ENOBUFS) { 1187 printf("%s: tx list init failed\n", USBDEVNAME(sc->kue_dev)); 1188 splx(s); 1189 return; 1190 } 1191 1192 /* Init RX ring. */ 1193 if (kue_rx_list_init(sc) == ENOBUFS) { 1194 printf("%s: rx list init failed\n", USBDEVNAME(sc->kue_dev)); 1195 splx(s); 1196 return; 1197 } 1198 1199 /* Load the multicast filter. */ 1200 kue_setmulti(sc); 1201 1202 if (sc->kue_ep[KUE_ENDPT_RX] == NULL) { 1203 if (kue_open_pipes(sc)) { 1204 splx(s); 1205 return; 1206 } 1207 } 1208 1209 ifp->if_flags |= IFF_RUNNING; 1210 ifp->if_flags &= ~IFF_OACTIVE; 1211 1212 splx(s); 1213 } 1214 1215 Static int 1216 kue_open_pipes(struct kue_softc *sc) 1217 { 1218 usbd_status err; 1219 struct kue_chain *c; 1220 int i; 1221 1222 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev),__FUNCTION__)); 1223 1224 /* Open RX and TX pipes. */ 1225 err = usbd_open_pipe(sc->kue_iface, sc->kue_ed[KUE_ENDPT_RX], 1226 USBD_EXCLUSIVE_USE, &sc->kue_ep[KUE_ENDPT_RX]); 1227 if (err) { 1228 printf("%s: open rx pipe failed: %s\n", 1229 USBDEVNAME(sc->kue_dev), usbd_errstr(err)); 1230 return (EIO); 1231 } 1232 1233 err = usbd_open_pipe(sc->kue_iface, sc->kue_ed[KUE_ENDPT_TX], 1234 USBD_EXCLUSIVE_USE, &sc->kue_ep[KUE_ENDPT_TX]); 1235 if (err) { 1236 printf("%s: open tx pipe failed: %s\n", 1237 USBDEVNAME(sc->kue_dev), usbd_errstr(err)); 1238 return (EIO); 1239 } 1240 1241 /* Start up the receive pipe. */ 1242 for (i = 0; i < KUE_RX_LIST_CNT; i++) { 1243 c = &sc->kue_cdata.kue_rx_chain[i]; 1244 usbd_setup_xfer(c->kue_xfer, sc->kue_ep[KUE_ENDPT_RX], 1245 c, c->kue_buf, KUE_BUFSZ, 1246 USBD_SHORT_XFER_OK | USBD_NO_COPY, USBD_NO_TIMEOUT, 1247 kue_rxeof); 1248 DPRINTFN(5,("%s: %s: start read\n", USBDEVNAME(sc->kue_dev), 1249 __FUNCTION__)); 1250 usbd_transfer(c->kue_xfer); 1251 } 1252 1253 return (0); 1254 } 1255 1256 Static int 1257 kue_ioctl(struct ifnet *ifp, u_long command, caddr_t data) 1258 { 1259 struct kue_softc *sc = ifp->if_softc; 1260 #if defined(__NetBSD__) || defined(__OpenBSD__) 1261 struct ifaddr *ifa = (struct ifaddr *)data; 1262 struct ifreq *ifr = (struct ifreq *)data; 1263 #endif 1264 int s, error = 0; 1265 1266 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev),__FUNCTION__)); 1267 1268 if (sc->kue_dying) 1269 return (EIO); 1270 1271 s = splimp(); 1272 1273 switch(command) { 1274 #if defined(__FreeBSD__) 1275 case SIOCSIFADDR: 1276 case SIOCGIFADDR: 1277 case SIOCSIFMTU: 1278 error = ether_ioctl(ifp, command, data); 1279 break; 1280 #elif defined(__NetBSD__) || defined(__OpenBSD__) 1281 case SIOCSIFADDR: 1282 ifp->if_flags |= IFF_UP; 1283 kue_init(sc); 1284 1285 switch (ifa->ifa_addr->sa_family) { 1286 #ifdef INET 1287 case AF_INET: 1288 #if defined(__NetBSD__) 1289 arp_ifinit(ifp, ifa); 1290 #else 1291 arp_ifinit(&sc->arpcom, ifa); 1292 #endif 1293 break; 1294 #endif /* INET */ 1295 #ifdef NS 1296 case AF_NS: 1297 { 1298 struct ns_addr *ina = &IA_SNS(ifa)->sns_addr; 1299 1300 if (ns_nullhost(*ina)) 1301 ina->x_host = *(union ns_host *) 1302 LLADDR(ifp->if_sadl); 1303 else 1304 memcpy(LLADDR(ifp->if_sadl), 1305 ina->x_host.c_host, 1306 ifp->if_addrlen); 1307 break; 1308 } 1309 #endif /* NS */ 1310 } 1311 break; 1312 1313 case SIOCSIFMTU: 1314 if (ifr->ifr_mtu > ETHERMTU) 1315 error = EINVAL; 1316 else 1317 ifp->if_mtu = ifr->ifr_mtu; 1318 break; 1319 1320 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 1321 1322 case SIOCSIFFLAGS: 1323 if (ifp->if_flags & IFF_UP) { 1324 if (ifp->if_flags & IFF_RUNNING && 1325 ifp->if_flags & IFF_PROMISC && 1326 !(sc->kue_if_flags & IFF_PROMISC)) { 1327 sc->kue_rxfilt |= KUE_RXFILT_PROMISC; 1328 kue_setword(sc, KUE_CMD_SET_PKT_FILTER, 1329 sc->kue_rxfilt); 1330 } else if (ifp->if_flags & IFF_RUNNING && 1331 !(ifp->if_flags & IFF_PROMISC) && 1332 sc->kue_if_flags & IFF_PROMISC) { 1333 sc->kue_rxfilt &= ~KUE_RXFILT_PROMISC; 1334 kue_setword(sc, KUE_CMD_SET_PKT_FILTER, 1335 sc->kue_rxfilt); 1336 } else if (!(ifp->if_flags & IFF_RUNNING)) 1337 kue_init(sc); 1338 } else { 1339 if (ifp->if_flags & IFF_RUNNING) 1340 kue_stop(sc); 1341 } 1342 sc->kue_if_flags = ifp->if_flags; 1343 error = 0; 1344 break; 1345 case SIOCADDMULTI: 1346 case SIOCDELMULTI: 1347 kue_setmulti(sc); 1348 error = 0; 1349 break; 1350 default: 1351 error = EINVAL; 1352 break; 1353 } 1354 1355 splx(s); 1356 1357 return (error); 1358 } 1359 1360 Static void 1361 kue_watchdog(struct ifnet *ifp) 1362 { 1363 struct kue_softc *sc = ifp->if_softc; 1364 1365 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev),__FUNCTION__)); 1366 1367 if (sc->kue_dying) 1368 return; 1369 1370 ifp->if_oerrors++; 1371 printf("%s: watchdog timeout\n", USBDEVNAME(sc->kue_dev)); 1372 1373 /* 1374 * The polling business is a kludge to avoid allowing the 1375 * USB code to call tsleep() in usbd_delay_ms(), which will 1376 * kill us since the watchdog routine is invoked from 1377 * interrupt context. 1378 */ 1379 usbd_set_polling(sc->kue_udev, 1); 1380 kue_stop(sc); 1381 kue_init(sc); 1382 usbd_set_polling(sc->kue_udev, 0); 1383 1384 if (ifp->if_snd.ifq_head != NULL) 1385 kue_start(ifp); 1386 } 1387 1388 /* 1389 * Stop the adapter and free any mbufs allocated to the 1390 * RX and TX lists. 1391 */ 1392 Static void 1393 kue_stop(struct kue_softc *sc) 1394 { 1395 usbd_status err; 1396 struct ifnet *ifp; 1397 int i; 1398 1399 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->kue_dev),__FUNCTION__)); 1400 1401 ifp = GET_IFP(sc); 1402 ifp->if_timer = 0; 1403 1404 /* Stop transfers. */ 1405 if (sc->kue_ep[KUE_ENDPT_RX] != NULL) { 1406 err = usbd_abort_pipe(sc->kue_ep[KUE_ENDPT_RX]); 1407 if (err) { 1408 printf("%s: abort rx pipe failed: %s\n", 1409 USBDEVNAME(sc->kue_dev), usbd_errstr(err)); 1410 } 1411 err = usbd_close_pipe(sc->kue_ep[KUE_ENDPT_RX]); 1412 if (err) { 1413 printf("%s: close rx pipe failed: %s\n", 1414 USBDEVNAME(sc->kue_dev), usbd_errstr(err)); 1415 } 1416 sc->kue_ep[KUE_ENDPT_RX] = NULL; 1417 } 1418 1419 if (sc->kue_ep[KUE_ENDPT_TX] != NULL) { 1420 err = usbd_abort_pipe(sc->kue_ep[KUE_ENDPT_TX]); 1421 if (err) { 1422 printf("%s: abort tx pipe failed: %s\n", 1423 USBDEVNAME(sc->kue_dev), usbd_errstr(err)); 1424 } 1425 err = usbd_close_pipe(sc->kue_ep[KUE_ENDPT_TX]); 1426 if (err) { 1427 printf("%s: close tx pipe failed: %s\n", 1428 USBDEVNAME(sc->kue_dev), usbd_errstr(err)); 1429 } 1430 sc->kue_ep[KUE_ENDPT_TX] = NULL; 1431 } 1432 1433 if (sc->kue_ep[KUE_ENDPT_INTR] != NULL) { 1434 err = usbd_abort_pipe(sc->kue_ep[KUE_ENDPT_INTR]); 1435 if (err) { 1436 printf("%s: abort intr pipe failed: %s\n", 1437 USBDEVNAME(sc->kue_dev), usbd_errstr(err)); 1438 } 1439 err = usbd_close_pipe(sc->kue_ep[KUE_ENDPT_INTR]); 1440 if (err) { 1441 printf("%s: close intr pipe failed: %s\n", 1442 USBDEVNAME(sc->kue_dev), usbd_errstr(err)); 1443 } 1444 sc->kue_ep[KUE_ENDPT_INTR] = NULL; 1445 } 1446 1447 /* Free RX resources. */ 1448 for (i = 0; i < KUE_RX_LIST_CNT; i++) { 1449 if (sc->kue_cdata.kue_rx_chain[i].kue_mbuf != NULL) { 1450 m_freem(sc->kue_cdata.kue_rx_chain[i].kue_mbuf); 1451 sc->kue_cdata.kue_rx_chain[i].kue_mbuf = NULL; 1452 } 1453 if (sc->kue_cdata.kue_rx_chain[i].kue_xfer != NULL) { 1454 usbd_free_xfer(sc->kue_cdata.kue_rx_chain[i].kue_xfer); 1455 sc->kue_cdata.kue_rx_chain[i].kue_xfer = NULL; 1456 } 1457 } 1458 1459 /* Free TX resources. */ 1460 for (i = 0; i < KUE_TX_LIST_CNT; i++) { 1461 if (sc->kue_cdata.kue_tx_chain[i].kue_mbuf != NULL) { 1462 m_freem(sc->kue_cdata.kue_tx_chain[i].kue_mbuf); 1463 sc->kue_cdata.kue_tx_chain[i].kue_mbuf = NULL; 1464 } 1465 if (sc->kue_cdata.kue_tx_chain[i].kue_xfer != NULL) { 1466 usbd_free_xfer(sc->kue_cdata.kue_tx_chain[i].kue_xfer); 1467 sc->kue_cdata.kue_tx_chain[i].kue_xfer = NULL; 1468 } 1469 } 1470 1471 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1472 } 1473 1474 #ifdef __FreeBSD__ 1475 /* 1476 * Stop all chip I/O so that the kernel's probe routines don't 1477 * get confused by errant DMAs when rebooting. 1478 */ 1479 Static void 1480 kue_shutdown(device_t dev) 1481 { 1482 struct kue_softc *sc; 1483 1484 sc = device_get_softc(dev); 1485 1486 kue_stop(sc); 1487 } 1488 #endif 1489
Indexes created Mon Sep 29 18:09:42 GMT 2025