Lines Matching refs:PCI
24 S3/S4 - Mode 1: PMC w/o IDE (switches opposite, one nearest PCI
35 C ROM on PCI bus (DINK32 on mainboard)
44 -C--C PCI 33, Mem 66, PPC 266
45 -- 0.5 - 0.9 ns PCI hold time
46 C 25 ohm PCI drive strength
56 000A 0000 000F FFFF Compatibility Hole (programmable to go to PCI space
61 8000 0000 FCFF FFFF PCI memory space
62 FD00 0000 FDFF FFFF PCI/ISA memory space (see 5.8, CPU_FD_ALIAS_EN)
63 FE00 0000 FE7F FFFF PCI/ISA I/O space (Forwarded to PCI address space
66 FE80 0000 FEBF FFFF PCI I/O space (Forwarded to PCI I/O space with high
68 FEC0 0000 FEDF FFFF PCI configuration address register (Each word in this
69 range is aliased to the PCI CONFIG_ADDR register)
70 FEE0 0000 FEEF FFFF PCI configuration data register (Each word in this
71 range is aliased to the PCI CONFIG_DATA register)
72 FEF0 0000 FEFF FFFF PCI interrupt acknowledge
74 memory or PCI bus -- cf. 5.6)
76 local memory or PCI bus -- cf. 5.6)
82 of the PCI memory space: FC00 0000, so EUMBBAR is FC00 0000, giving us
117 IRQ0 - PCI Slot #0 INTA#
118 IRQ1 - PCI Slot #1 INTA# / shared with WinBond I/O
119 IRQ2 - PCI Slot #2 INTA#
120 IRQ3 - PCI Slot #3 INTA#
130 0 - PMC host with IDE (3.3v PCI slots are unavailable)
131 1 - PMC host w/o IDE (all PCI slots are available)
133 3 - Yellowknife mode--just like #2, except drives INTA# on 4th PCI slot
138 routed to PCI slot 3, we have to check for both a Winbond (ISA)
139 interrupt, and a PCI slot interrupt. So basically, we have a
141 bus attachment registers an interrupt for PCI slot 3 with its own
155 IRQ2 - PCI Slot #1, INTA#
156 IRQ3 - PCI Slot #2, INTA#
157 IRQ4 - PCI Slot #3, INTA#
158 IRQ5 - PCI Slot #4, INTA#
Indexes created Mon Oct 27 20:09:55 GMT 2025