Home | History | Annotate | Line # | Download | only in pci
      1 /*	$NetBSD: cypide.c,v 1.32 2017/10/20 07:06:08 jdolecek Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 1999, 2000, 2001 Manuel Bouyer.
      5  *
      6  * Redistribution and use in source and binary forms, with or without
      7  * modification, are permitted provided that the following conditions
      8  * are met:
      9  * 1. Redistributions of source code must retain the above copyright
     10  *    notice, this list of conditions and the following disclaimer.
     11  * 2. Redistributions in binary form must reproduce the above copyright
     12  *    notice, this list of conditions and the following disclaimer in the
     13  *    documentation and/or other materials provided with the distribution.
     14  *
     15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     18  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     25  *
     26  */
     27 
     28 #include <sys/cdefs.h>
     29 __KERNEL_RCSID(0, "$NetBSD: cypide.c,v 1.32 2017/10/20 07:06:08 jdolecek Exp $");
     30 
     31 #include <sys/param.h>
     32 #include <sys/systm.h>
     33 
     34 #include <dev/pci/pcivar.h>
     35 #include <dev/pci/pcidevs.h>
     36 #include <dev/pci/pciidereg.h>
     37 #include <dev/pci/pciidevar.h>
     38 #include <dev/pci/pciide_cy693_reg.h>
     39 #include <dev/pci/cy82c693var.h>
     40 
     41 static void cy693_chip_map(struct pciide_softc*, const struct pci_attach_args*);
     42 static void cy693_setup_channel(struct ata_channel*);
     43 
     44 static int  cypide_match(device_t, cfdata_t, void *);
     45 static void cypide_attach(device_t, device_t, void *);
     46 
     47 CFATTACH_DECL_NEW(cypide, sizeof(struct pciide_softc),
     48     cypide_match, cypide_attach, pciide_detach, NULL);
     49 
     50 static const struct pciide_product_desc pciide_cypress_products[] =  {
     51 	{ PCI_PRODUCT_CONTAQ_82C693,
     52 	  IDE_16BIT_IOSPACE,
     53 	  "Cypress 82C693 IDE Controller",
     54 	  cy693_chip_map,
     55 	},
     56 	{ 0,
     57 	  0,
     58 	  NULL,
     59 	  NULL
     60 	}
     61 };
     62 
     63 static int
     64 cypide_match(device_t parent, cfdata_t match, void *aux)
     65 {
     66 	struct pci_attach_args *pa = aux;
     67 
     68 	if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_CONTAQ &&
     69 	    PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE &&
     70 	    PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
     71 		if (pciide_lookup_product(pa->pa_id, pciide_cypress_products))
     72 			return (2);
     73 	}
     74 	return (0);
     75 }
     76 
     77 static void
     78 cypide_attach(device_t parent, device_t self, void *aux)
     79 {
     80 	struct pci_attach_args *pa = aux;
     81 	struct pciide_softc *sc = device_private(self);
     82 
     83 	sc->sc_wdcdev.sc_atac.atac_dev = self;
     84 
     85 	pciide_common_attach(sc, pa,
     86 	    pciide_lookup_product(pa->pa_id, pciide_cypress_products));
     87 
     88 }
     89 
     90 static void
     91 cy693_chip_map(struct pciide_softc *sc, const struct pci_attach_args *pa)
     92 {
     93 	struct pciide_channel *cp;
     94 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
     95 
     96 	if (pciide_chipen(sc, pa) == 0)
     97 		return;
     98 
     99 	/*
    100 	 * this chip has 2 PCI IDE functions, one for primary and one for
    101 	 * secondary. So we need to call pciide_mapregs_compat() with
    102 	 * the real channel
    103 	 */
    104 	if (pa->pa_function == 1) {
    105 		sc->sc_cy_compatchan = 0;
    106 	} else if (pa->pa_function == 2) {
    107 		sc->sc_cy_compatchan = 1;
    108 	} else {
    109 		aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    110 		    "unexpected PCI function %d\n", pa->pa_function);
    111 		return;
    112 	}
    113 	if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
    114 		aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    115 		    "bus-master DMA support present\n");
    116 		pciide_mapreg_dma(sc, pa);
    117 	} else {
    118 		aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    119 		    "hardware does not support DMA\n");
    120 		sc->sc_dma_ok = 0;
    121 	}
    122 
    123 	sc->sc_cy_handle = cy82c693_init(pa->pa_iot);
    124 	if (sc->sc_cy_handle == NULL) {
    125 		aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    126 		    "unable to map hyperCache control registers\n");
    127 		sc->sc_dma_ok = 0;
    128 	}
    129 
    130 	sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DATA16 | ATAC_CAP_DATA32;
    131 	if (sc->sc_dma_ok) {
    132 		sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA;
    133 		sc->sc_wdcdev.irqack = pciide_irqack;
    134 	}
    135 	sc->sc_wdcdev.sc_atac.atac_pio_cap = 4;
    136 	sc->sc_wdcdev.sc_atac.atac_dma_cap = 2;
    137 	sc->sc_wdcdev.sc_atac.atac_set_modes = cy693_setup_channel;
    138 
    139 	sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
    140 	sc->sc_wdcdev.sc_atac.atac_nchannels = 1;
    141 	sc->sc_wdcdev.wdc_maxdrives = 2;
    142 
    143 	wdc_allocate_regs(&sc->sc_wdcdev);
    144 
    145 	/* Only one channel for this chip; if we are here it's enabled */
    146 	cp = &sc->pciide_channels[0];
    147 	sc->wdc_chanarray[0] = &cp->ata_channel;
    148 	cp->name = PCIIDE_CHANNEL_NAME(0);
    149 	cp->ata_channel.ch_channel = 0;
    150 	cp->ata_channel.ch_atac = &sc->sc_wdcdev.sc_atac;
    151 
    152 	aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    153 	    "primary channel %s to ",
    154 	    (interface & PCIIDE_INTERFACE_SETTABLE(0)) ?
    155 	    "configured" : "wired");
    156 	if (interface & PCIIDE_INTERFACE_PCI(0)) {
    157 		aprint_normal("native-PCI mode\n");
    158 		pciide_mapregs_native(pa, cp, pciide_pci_intr);
    159 	} else {
    160 		aprint_normal("compatibility mode\n");
    161 		pciide_mapregs_compat(pa, cp, sc->sc_cy_compatchan);
    162 		if ((cp->ata_channel.ch_flags & ATACH_DISABLED) == 0)
    163 			pciide_map_compat_intr(pa, cp, sc->sc_cy_compatchan);
    164 	}
    165 	wdcattach(&cp->ata_channel);
    166 }
    167 
    168 static void
    169 cy693_setup_channel(struct ata_channel *chp)
    170 {
    171 	struct ata_drive_datas *drvp;
    172 	int drive;
    173 	u_int32_t cy_cmd_ctrl;
    174 	u_int32_t idedma_ctl;
    175 	struct pciide_channel *cp = CHAN_TO_PCHAN(chp);
    176 	struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
    177 	int dma_mode = -1;
    178 
    179 	ATADEBUG_PRINT(("cy693_chip_map: old timings reg 0x%x\n",
    180 	    pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)),DEBUG_PROBE);
    181 
    182 	cy_cmd_ctrl = idedma_ctl = 0;
    183 
    184 	/* setup DMA if needed */
    185 	pciide_channel_dma_setup(cp);
    186 
    187 	for (drive = 0; drive < 2; drive++) {
    188 		drvp = &chp->ch_drive[drive];
    189 		/* If no drive, skip */
    190 		if (drvp->drive_type == ATA_DRIVET_NONE)
    191 			continue;
    192 		/* add timing values, setup DMA if needed */
    193 		if (drvp->drive_flags & ATA_DRIVE_DMA) {
    194 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
    195 			/* use Multiword DMA */
    196 			if (dma_mode == -1 || dma_mode > drvp->DMA_mode)
    197 				dma_mode = drvp->DMA_mode;
    198 		}
    199 		cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
    200 		    CY_CMD_CTRL_IOW_PULSE_OFF(drive));
    201 		cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
    202 		    CY_CMD_CTRL_IOW_REC_OFF(drive));
    203 		cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
    204 		    CY_CMD_CTRL_IOR_PULSE_OFF(drive));
    205 		cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
    206 		    CY_CMD_CTRL_IOR_REC_OFF(drive));
    207 	}
    208 	pci_conf_write(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL, cy_cmd_ctrl);
    209 	chp->ch_drive[0].DMA_mode = dma_mode;
    210 	chp->ch_drive[1].DMA_mode = dma_mode;
    211 
    212 	if (dma_mode == -1)
    213 		dma_mode = 0;
    214 
    215 	if (sc->sc_cy_handle != NULL) {
    216 		/* Note: `multiple' is implied. */
    217 		cy82c693_write(sc->sc_cy_handle,
    218 		    (sc->sc_cy_compatchan == 0) ?
    219 		    CY_DMA_IDX_PRIMARY : CY_DMA_IDX_SECONDARY, dma_mode);
    220 	}
    221 
    222 	if (idedma_ctl != 0) {
    223 		/* Add software bits in status register */
    224 		bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
    225 		    idedma_ctl);
    226 	}
    227 	ATADEBUG_PRINT(("cy693_chip_map: new timings reg 0x%x\n",
    228 	    pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)), DEBUG_PROBE);
    229 }
    230