Home | History | Annotate | Line # | Download | only in ppbus
      1 /* $NetBSD: ppbus_gpio.c,v 1.3 2021/08/07 16:19:15 thorpej Exp $ */
      2 
      3 /*
      4  *  Copyright (c) 2008, Hans Rosenfeld <rosenfeld (at) grumpf.hope-2000.org>
      5  *  All rights reserved.
      6  *
      7  *  Redistribution and use in source and binary forms, with or without
      8  *  modification, are permitted provided that the following conditions
      9  *  are met:
     10  *  1. Redistributions of source code must retain the above copyright
     11  *     notice, this list of conditions and the following disclaimer.
     12  *  2. Redistributions in binary form must reproduce the above copyright
     13  *     notice, this list of conditions and the following disclaimer in the
     14  *     documentation and/or other materials provided with the distribution.
     15  *
     16  *  THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
     17  *  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     18  *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     19  *  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
     20  *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     21  *  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     22  *  OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     23  *  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     24  *  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     25  *  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     26  *  SUCH DAMAGE.
     27  */
     28 
     29 #include <sys/cdefs.h>
     30 __KERNEL_RCSID(0, "$NetBSD: ppbus_gpio.c,v 1.3 2021/08/07 16:19:15 thorpej Exp $");
     31 
     32 #include <sys/param.h>
     33 #include <sys/systm.h>
     34 #include <sys/device.h>
     35 #include <sys/gpio.h>
     36 #include <sys/kernel.h>
     37 
     38 #include <dev/gpio/gpiovar.h>
     39 
     40 #include <dev/ppbus/ppbus_conf.h>
     41 #include <dev/ppbus/ppbus_base.h>
     42 #include <dev/ppbus/ppbus_io.h>
     43 
     44 static int  gpio_ppbus_open(void *, device_t);
     45 static void gpio_ppbus_close(void *, device_t);
     46 static int  gpio_ppbus_pin_read(void *, int);
     47 static void gpio_ppbus_pin_write(void *, int, int);
     48 static void gpio_ppbus_pin_ctl(void *, int, int);
     49 
     50 
     51 #define PORT(r, b, i) { PPBUS_R##r##TR, PPBUS_W##r##TR, b, i}
     52 static const struct {
     53 	u_char rreg;
     54 	u_char wreg;
     55 	u_char bit;
     56 	u_char inv;
     57 } ppbus_port[PPBUS_NPINS] = {	/* parallel port wiring: */
     58 	PORT(C, 0, 1),		/*     1: /C0  Output    */
     59 	PORT(D, 0, 0),		/*     2:  D0  Output    */
     60 	PORT(D, 1, 0),		/*     3:  D1  Output    */
     61 	PORT(D, 2, 0),		/*     4:  D2  Output    */
     62 	PORT(D, 3, 0),		/*     5:  D3  Output    */
     63 	PORT(D, 4, 0),		/*     6:  D4  Output    */
     64 	PORT(D, 5, 0),		/*     7:  D5  Output    */
     65 	PORT(D, 6, 0),		/*     8:  D6  Output    */
     66 	PORT(D, 7, 0),		/*     9:  D7  Output    */
     67 	PORT(S, 6, 0),		/*    10:  S6  Input     */
     68 	PORT(S, 7, 1),		/*    11: /S7  Input     */
     69 	PORT(S, 5, 0),		/*    12:  S5  Input     */
     70 	PORT(S, 4, 0),		/*    13:  S4  Input     */
     71 	PORT(C, 1, 1),		/*    14: /C1  Output    */
     72 	PORT(S, 3, 0),		/*    15:  S3  Input     */
     73 	PORT(C, 2, 0),		/*    16:  C2  Output    */
     74 	PORT(C, 3, 1),		/*    17: /C3  Output    */
     75 };				/* 18-25: GND            */
     76 
     77 void
     78 gpio_ppbus_attach(struct ppbus_softc *sc)
     79 {
     80 	struct gpiobus_attach_args gba;
     81 	gpio_pin_t *pin;
     82 	int i;
     83 
     84 	for (pin = &sc->sc_gpio_pins[0], i = 0; i < PPBUS_NPINS; pin++, i++) {
     85 		pin->pin_num = i;
     86 
     87 		if (((i >= 9) && (i <= 12)) || (i == 14)) {
     88 			pin->pin_caps = GPIO_PIN_INPUT;
     89 			pin->pin_flags = GPIO_PIN_INPUT;
     90 			pin->pin_state = gpio_ppbus_pin_read(sc, i);
     91 		} else {
     92 			pin->pin_caps = GPIO_PIN_OUTPUT;
     93 			pin->pin_flags = GPIO_PIN_OUTPUT;
     94 			pin->pin_state = GPIO_PIN_LOW;
     95 			gpio_ppbus_pin_write(sc, i, pin->pin_state);
     96 		}
     97 
     98 		gpio_ppbus_pin_ctl(sc, i, pin->pin_flags);
     99 	}
    100 
    101 	sc->sc_gpio_gc.gp_cookie = sc;
    102 	sc->sc_gpio_gc.gp_gc_open = gpio_ppbus_open;
    103 	sc->sc_gpio_gc.gp_gc_close = gpio_ppbus_close;
    104 	sc->sc_gpio_gc.gp_pin_read = gpio_ppbus_pin_read;
    105 	sc->sc_gpio_gc.gp_pin_write = gpio_ppbus_pin_write;
    106 	sc->sc_gpio_gc.gp_pin_ctl = gpio_ppbus_pin_ctl;
    107 
    108 	gba.gba_gc = &sc->sc_gpio_gc;
    109 	gba.gba_pins = sc->sc_gpio_pins;
    110 	gba.gba_npins = PPBUS_NPINS;
    111 
    112 	config_found(sc->sc_dev, &gba, gpiobus_print,
    113 	    CFARGS(.iattr = "gpiobus"));
    114 }
    115 
    116 static int
    117 gpio_ppbus_open(void *arg, device_t dev)
    118 {
    119 	struct ppbus_softc *sc = arg;
    120 
    121 	return ppbus_request_bus(sc->sc_dev, dev, PPBUS_WAIT|PPBUS_INTR, (hz));
    122 }
    123 
    124 static void
    125 gpio_ppbus_close(void *arg, device_t dev)
    126 {
    127 	struct ppbus_softc *sc = arg;
    128 
    129 	(void) ppbus_release_bus(sc->sc_dev, dev, PPBUS_WAIT|PPBUS_INTR, (hz));
    130 }
    131 
    132 static int
    133 gpio_ppbus_pin_read(void *arg, int pin)
    134 {
    135 	struct ppbus_softc *sc = arg;
    136 	u_char port = ppbus_io(sc->sc_dev, ppbus_port[pin].rreg, NULL, 0, 0);
    137 
    138 	return ((port >> ppbus_port[pin].bit) & 1) ^ ppbus_port[pin].inv;
    139 }
    140 
    141 static void
    142 gpio_ppbus_pin_write(void *arg, int pin, int value)
    143 {
    144 	struct ppbus_softc *sc = arg;
    145 	u_char port = ppbus_io(sc->sc_dev, ppbus_port[pin].rreg, NULL, 0, 0);
    146 
    147 	value ^= ppbus_port[pin].inv;
    148 	value <<= ppbus_port[pin].bit;
    149 	port &= ~(1 << ppbus_port[pin].bit);
    150 	port |= value;
    151 
    152 	ppbus_io(sc->sc_dev, ppbus_port[pin].wreg, NULL, 0, port);
    153 }
    154 
    155 static void
    156 gpio_ppbus_pin_ctl(void *arg, int pin, int flags)
    157 {
    158 	/* can't change parallel port pin configuration */
    159 }
    160